RESUMEN
Oxygen vacancy (Ov) is an anionic defect widely existed in metal oxide lattice, as exemplified by CeO2, TiO2, and ZnO. As Ov can modify the band structure of solid, it improves the physicochemical properties such as the semiconducting performance and catalytic behaviours. We report here a new type of Ov as an intrinsic part of a perfect crystalline surface. Such non-defect Ov stems from the irregular hexagonal sawtooth-shaped structure in the (111) plane of trivalent rare earth oxides (RE2O3). The materials with such intrinsic Ov structure exhibit excellent performance in ammonia decomposition reaction with surface Ru active sites. Extremely high H2 formation rate has been achieved at ~1 wt% of Ru loading over Sm2O3, Y2O3 and Gd2O3 surface, which is 1.5-20 times higher than reported values in the literature. The discovery of intrinsic Ov suggests great potentials of applying RE oxides in heterogeneous catalysis and surface chemistry.
RESUMEN
High-entropy alloys (HEAs) have aroused extensive attention in the field of catalysis. However, due to the integration of multiple active sites in HEA, it exhibits excessive adsorption behavior resulting in difficult desorption of active species from the catalyst surfaces, which hinders the catalytic efficiency. Therefore, adjusting the adsorption strength of the active site in HEA to enhance the catalytic activity is of great importance. By introducing rare-earth (RE) elements into the high-entropy alloy, the delocalization of 4f electrons can be achieved through the interaction between the multimetal active site and RE, which benefits to regulate the adsorption strength of the HEA surface. Herein, the RE Ce-modified hexagonal-close-packed PtRuFeCoNiZn-Ce/C HEAs are synthesized and showed an excellent electrocatalytic activity for hydrogen evolution reaction and oxygen evolution reaction with ultralow overpotentials of 4, 7 and 156, 132 mV, respectively, to reach 10 mA cm-2 in 0.5 M H2SO4 and 1.0 M KOH solutions, and the assembled water electrolysis cell only requires a voltage of 1.43 V to reach 10 mA cm-2, which is much better than the performance of PtRuFeCoNiZn/C. Combined with the results of in situ attenuated total reflection infrared spectroscopy and density functional theory (DFT), the fundamental reasons for the improvement of catalyst activity come from two aspects: (i) local lattice distortion of HEA caused by the introduction of RE with large atomic radius induces 4f orbital electron delocalization of RE elements and enhances electron exchange between RE and active sites. (ii) The electronegativity difference between the RE element and the active site forms a surface dipole in HEA, which optimizes the adsorption of the active intermediate by the HEA surface site. This study provides an insightful idea for the rational design of high-performance HEA- and RE-based electrocatalysts.
RESUMEN
The utilization of rare earth elements to regulate the interaction between catalysts and oxygen-containing species holds promising prospects in the field of oxygen electrocatalysis. Through structural engineering and adsorption regulation, it is possible to achieve high-performance catalytic sites with a broken activity-stability tradeoff. Herein, this work fabricates a hierarchical CeO2/NiCo hydroxide for electrocatalytic oxygen evolution reaction (OER). This material exhibits superior overpotentials and enhanced stability. Multiple potential-dependent experiments reveal that CeO2 promotes oxygen-species exchange, especially OH- ions, between catalyst and environment, thereby optimizing the redox transformation of hydroxide and the adsorption of oxygen-containing intermediates during OER. This is attributed to the reduction in the adsorption energy barrier of Ni to *OH facilitated by CeO2, particularly the near-interfacial Ni sites. The less-damaging adsorbate evolution mechanism and the CeO2 hierarchical shell significantly enhance the structural robustness, leading to exceptional stability. Additionally, the observed "self-healing" phenomenon provides further substantiation for the accelerated oxygen exchange. This work provides a neat strategy for the synthesis of ceria-based complex hollow electrocatalysts, as well as an in-depth insight into the co-catalytic role of CeO2 in terms of oxygen transfer.
RESUMEN
Heterogeneous catalysts have attracted extensive attention among various emerging catalysts for their exceptional oxygen evolution reaction (OER) capabilities, outperforming their single-component counterparts. Nonetheless, the synthesis of heterogeneous materials with predictable, precise, and facile control remains a formidable challenge. Herein, a novel strategy involving the decoration of catalysts with CeO2 is introduced to concurrently engineer heterogeneous interfaces and adjust phase composition, thereby enhancing OER performance. Theoretical calculations suggest that the presence of ceria reduces the free energy barrier for the conversion of nitrides into metals. Supporting this, the experimental findings reveal that the incorporation of rare earth oxides enables the controlled phase transition from nitride into metal, with the proportion adjustable by varying the amount of added rare earth. Thanks to the role of CeO2 decoration in promoting the reaction kinetics and fostering the formation of the genuine active phase, the optimized Ni3FeN/Ni3Fe/CeO2-5% nanoparticles heterostructure catalyst exhibits outstanding OER activity, achieving an overpotential of just 249 mV at 10 mA cm-2. This approach offers fresh perspectives for the conception of highly efficient heterogeneous OER catalysts, contributing a strategic avenue for advanced catalytic design in the field of energy conversion.
RESUMEN
Design the electrocatalysts without noble metal is still a challenge for oxygen evolution reaction (OER) in acid media. Herein, we reported the manganese (Mn) doping method to decrease the concentration of oxygen vacancy (VO) and form the Mn-O structure adjacent octahedral sites in spinel NiCo2O4-δ (NiMn1.5Co3O4-δ), which highly enhanced the activity and stability of spinel NiCo2O4-δ with a low overpotential (η) of 280â mV at j=10â mA cm-2 and long-term stability of 80â h in acid media. The isotopic labelling experiment based on differential electrochemical mass spectrometry (DEMS) clearly demonstrated the lattice oxygen in NiMn1.5Co3O4-δ is more stable due to strong Mn-O bond and shows synergetic adsorbate evolution mechanism (SAEM) for acid OER. Density functional theory (DFT) calculations reveal highly increased oxygen vacancy formation energy (EVO) of NiCo2O4-δ after Mn doping. More importantly, the highly hydrogen bonding between Mn-O and *OOH adsorbed on adjacent Co octahedral sites promote the formation of *OO from *OOH due to the greatly enhanced charge density of O in Mn substituted sites.
RESUMEN
The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.
RESUMEN
The low coverage rate of anode OH adsorption under high current density conditions has become an important factor restricting the development of an industrial alkaline water electrolyzer (AWE). Here, we present our rare earth modification promotion strategy on using the rare earth oxygen-friendly interface to increase the OH coverage of the NiS2 surface for efficient AWE anode catalysis. Density functional theory calculations predict that rare earths can enhance the coverage of surface OH, and the synthesis reaction mechanism is discussed in the synthesis process spectrum. Experimentally, by preparing a series of rare-earth-modified NiS2, the relationship between OH coverage, active site density, and catalytic activity was established by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, time-resolved absorption spectra, and so on. The unique oxygenophilic properties of rare earths enhance OH coverage, thereby increasing the density of active sites for efficient catalysis. Furthermore, Eu2O3/NiS2 was assembled into the AWE equipment and operated stably for over 240 h at a current density of 300 mA cm-2 under industrial conditions of 80 °C and 30% KOH. Rare-earth-modified NiS2 exhibits better catalytic activity than traditional non-noble metal anode catalysts Ni(OH)2 and NiS2, providing a new approach for rare earth promotion to solve the problem of low OH coverage in the AWE anode.
RESUMEN
The intricate tumor microenvironment (TME) always brings about unsatisfactory therapeutic effects for treatments, although nanomedicines have been demonstrated to be highly beneficial for synergistic therapies to avoid the side effects caused by the complexity and heterogeneity of cancer. Developing nanotheranostics with the functionalities of both synergistic therapies and TME regulation is a good strategy but is still in its infancy. Herein, an "all-in-one" nanoplatform for integrated diagnosis and treatment, namely, Carrier@ICG@DOX@FA (CIDF), is constructed. Benefiting from the bimetallic coordination of Eu3+-HTHA (4,4,4-trifluoro-1-(9-hexylcarbazol-3-yl)-1,3-butanedione) and Fe3+ with the ligands in UiO-67, CIDF can simultaneously achieve two-photon fluorescence imaging, fluorescent lifetime imaging in deep tumors, and regulation of TME. Owing to its porosity, CIDF can encapsulate indocyanine green as photosensitizers and doxorubicin as chemotherapeutic agent, further realizing light-controlled drug release. Moreover, CIDF exhibited good biocompatibility and tumor targeting by coating with folic-acid-modified polymers. Both in vitro and in vivo experiments demonstrate the excellent therapeutic efficacy of CIDF through dual-modal-imaging-guided synergistic photothermal-, photodynamic-, and chemotherapy. CIDF provides a new paradigm for the construction of TME-regulated synergistic nanotheranostics and realizes the complete elimination of tumors without recurrence.
Asunto(s)
Nanopartículas , Fototerapia , Fototerapia/métodos , Línea Celular Tumoral , Microambiente Tumoral , Doxorrubicina/farmacología , Doxorrubicina/uso terapéutico , Verde de Indocianina , Imagen ÓpticaRESUMEN
Alternating current electroluminescence (ACEL) devices are attractive candidates in cost-effective lighting, sensing, and flexible displays due to their uniform luminescence, stable performance, and outstanding deformability. However, ACEL devices have suffered from limited options for the light-emitting layer, which presents a significant constraint in the progress of utilizing ACEL. Herein, a new class of ACEL phosphors based on lanthanide metal-organic frameworks (Ln-MOFs) is devised. A synthesis of lanthanide-benzenetricarboxylate (Ln-BTC) thin film on a brass grid substrate seeded with ZnO nanowires (NWs) as anchors is developed. The as-synthesized Ln-BTC thin film is employed as the emissive layer and shows visible electroluminescence driven by alternating current (2.9 V µm-1 , 1 kHz) for the first time. Mechanistic investigations reveal that the Ln-based ACEL stems from impact excitation by accelerated electrons from ZnO NWs. Fine-tuning of the ACEL color is also demonstrated by controlling the Ln-MOF compositions and introducing an extra ZnS emitting layer. The advances in these optical materials expand the application of ACEL devices in anti-counterfeiting.
RESUMEN
Ion regulation strategy is regarded as a promising pathway for designing transition metal oxide-based electrocatalysts for oxygen evolution reaction (OER) with improved activity and stability. Precise anion conditioning can accurately change the anionic environment so that the acid radical ions (SO4 2- , PO3 2- , SeO4 2- , etc.), regardless of their state (inside the catalyst, on the catalyst surface, or in the electrolyte), can optimize the electronic structure of the cationic active site and further increase the catalytic activity. Herein, we report a new approach to encapsulate S atoms at the tetrahedral sites of the NaCl-type oxide NiO to form a tetraoxo-tetrahedral coordination structure (S-O4 ) inside the NiO (S-NiO -I). Density functional theory (DFT) calculations and operando vibrational spectroscopy proves that this kind of unique structure could achieve the S-O4 and Ni-S stable structure in S-NiO-I. Combining mass spectroscopy characterization, it could be confirmed that the S-O4 structure is the key factor for triggering the lattice oxygen exchange to participate in the OER process. This work demonstrates that the formation of tetraoxygen tetrahedral structure is a generalized key for boosting the OER performances of transition metal oxides.
RESUMEN
The electronic structure and geometric configuration of catalysts play a crucial role to design novel perovskite-type catalysts for oxygen reduction reaction (ORR). Nowadays, many studies are more concerned with the influence of electronic structure and ignore the geometric effect, which plays a nonnegligible role in enhancing catalytic performances. Herein, this work regulates the MnO6 octahedral tilting degree of LaMnO3 by modulating the concentration of Y3+, excluding the electronic effect from the valence state of manganese. Plotting the MnO6 octahedral tilting degree as a function of concentration of Y3+ produces a volcano-shaped plot. The octahedral tilting can reduce the Mn-O covalency, generating more highly active Mn3+ and oxygen vacancies during ORR process. The specific activity has a positive correlation with octahedral tilting degree. Meanwhile, the octahedral tilting stabilizes Mn-O interactions during ORR process and promote stability. Based on experimental results and DFT calculations, octahedral tilting alters the rate-determining step (RDS) and decrease the energy barrier. Subsequent extended experiment confirms that octahedral tilting is the key factor to affect the catalytic performances.
RESUMEN
To master the activation law and mechanism of surface lattice oxygen for the oxygen evolution reaction (OER) is critical for the development of efficient water electrolysis. Herein, we propose a strategy for triggering lattice-oxygen oxidation and enabling non-concerted proton-electron transfers during OER conditions by substituting Al in La0.3Sr0.7CoO3-δ. According to our experimental data and density functional theory calculations, the substitution of Al can have a dual effect of promoting surface reconstruction into active Co oxyhydroxides and activating deprotonation on the reconstructed oxyhydroxide, inducing negatively charged oxygen as an active site. This leads to a significant improvement in the OER activity. Additionally, Al dopants facilitate the preoxidation of active cobalt metal, which introduces great structural flexibility due to elevated O 2p levels. As OER progresses, the accumulation of oxygen vacancies and lattice-oxygen oxidation on the catalyst surface leads to the termination of Al3+ leaching, thereby preventing further reconstruction. We have demonstrated a promising approach to achieving tunable electrochemical reconstruction by optimizing the electronic structure and gained a fundamental understanding of the activation mechanism of surface oxygen sites.
RESUMEN
Superlattices have considerable potential as sonosensitizers for cancer therapy because of their flexible and tunable band gaps, although they have not yet been reported. In this study, a Ti-based organic-inorganic superlattice with good electron-hole separation was synthesized, which consisted of orderly layered superlattices of 2,2'-bipyridine-5,5'-dicarboxylic acid (BPDC) and Ti-O layers. In addition, the superlattice was coordinated with Fe(III) and encapsulated doxorubicin (DOX) to prepare Ti-BPDC@Fe@DOX@PEG (TFDP) after biocompatibility modification. TFDP can realize the simultaneous generation of reactive oxygen species and release of DOX under ultrasound irradiation. Moreover, adjusting the Fe(III) content can effectively modulate the band gap of the superlattice and increase the efficiency of sonodynamic therapy (SDT). The mechanisms underlying this modulation were explored. TFDP with Fe(III) can also be used as a contrast agent for magnetic resonance imaging (MRI). Both in vitro and in vivo experiments demonstrated the ability of TFDP to precisely treat cancer using MRI-guided SDT/chemotherapy. This study expands the applications of superlattices as sonosensitizers with flexible and tailored modifications and indicates that superlattices are promising for precise and customized treatments.
Asunto(s)
Neoplasias , Terapia por Ultrasonido , Humanos , Compuestos Férricos , Titanio , Terapia por Ultrasonido/métodos , Doxorrubicina/farmacología , Doxorrubicina/uso terapéutico , Neoplasias/terapia , Especies Reactivas de Oxígeno , Imagen por Resonancia Magnética , Línea Celular TumoralRESUMEN
Blue perovskite light-emitting diodes (LEDs) have shown external quantum efficiencies (EQEs) of more than 10%; however, devices that emit in the true blue-those that accord with the emission wavelength required for Rec. 2100 primary blue-have so far been limited to EQEs of ~6%. We focused here on true blue emitting CsPbBr3 colloidal nanocrystals (c-NCs), finding in early studies that they suffer from a high charge injection barrier, a problem exacerbated in films containing multiple layers of nanocrystals. We introduce a self-assembled monolayer (SAM) active layer that improves charge injection. We identified a bifunctional capping ligand that simultaneously enables the self-assembly of CsPbBr3 c-NCs while passivating surface traps. We report, as a result, SAM-based LEDs exhibit a champion EQE of ~12% [CIE of (0.132, 0.069) at 4.0 V with a luminance of 11 cd/m2], and 10-fold-enhanced operating stability relative to the best previously reported Rec. 2100-blue perovskite LEDs.
RESUMEN
Copper-based electrocatalysts effectively produce multicarbon (C2+ ) compounds during the electrochemical CO2 reduction (CO2 RR). However, big challenges still remain because of the chemically unstable active sites. Here, cerium is used as a self-sacrificing agent to stabilize the Cu+ of CuS, due to the facile Ce3+ /Ce4+ redox. CeO2 -modified CuS nanoplates achieve high ethanol selectivity, with FE up to 54% and FEC2+ ≈ 75% in a flow cell. Moreover, in situ Raman spectroscopy and in situ Fourier-transform infrared spectroscopy indicate that the stable Cu+ species promote CC coupling step under CO2 RR. Density functional theory calculations further reveal that the stronger * CO adsorption and lower CC coupling energy, which is conducive to the selective generation of ethanol products. This work provides a facile strategy to convert CO2 into ethanol by retaining Cu+ species.
RESUMEN
Solid solution-oxide heterostructures combine the advantages of solid solution and heterojunction materials to improve electronic structure and optical properties by metal doping, and enhance charge separation and transfer in semiconductor photocatalysts by creating a built-in electric field. Nevertheless, the effective design and synthesis of these materials remains a significant challenge. Here, we develop a generally applicable strategy that leverages the transformable properties of metal-organic frameworks (MOFs) to prepare solid solution-oxide heterojunctions with controllable structural and chemical compositions. The process consists of three main steps. First, MOFs with different topological structures and metal centers are transformed, accompanied by pre-nucleation of a metal oxide. Second, solid solution is prepared through calcination of the transformed MOFs. Finally, a heterojunction is formed by combining solid solution with another metal oxide group through endogenous overflow. DFT calculations and study on carrier dynamics show that the structure of the material effectively prevents electrons from returning to the bulk phase, exhibiting superior photocatalytic reduction performance of CO2 . This study is expected to promote the controllable synthesis and research of MOF-derived heterojunctions.
Asunto(s)
Estructuras Metalorgánicas , Teoría Funcional de la Densidad , Electricidad , Electrónica , ÓxidosRESUMEN
Phase transition of the polymorphs is critical for controlled synthesis and property modulation of functional materials. Upconversion emissions from an efficient hexagonal sodium rare-earth (RE) fluoride compound, ß-NaREF4, which is generally obtained from the phase transition of the cubic (α-) phase counterpart, are attractive for photonic applications. However, the investigation of the α â ß phase transition of NaREF4 and its effect on the composition and architecture is still preliminary. Herein, we investigated the phase transition with two kinds of α-NaREF4 particles. Instead of a uniform composition, the ß-NaREF4 microcrystals exhibited regionally distributed RE3+ ions, in which the RE3+ with a smaller ionic radius (smaller RE3+) sandwiched the RE3+ with a larger ionic radius (larger RE3+). We unravel that the α-NaREF4 particles transformed to ß-NaREF4 nuclei with no controversial dissolution, and the α â ß phase transition toward NaREF4 microcrystals included nucleation and growth steps. The component-dependent phase transition is corroborated with RE3+ ions from Ho3+ to Lu3+ and multiple sandwiched microcrystals were obtained, in which up to five kinds of RE components were distributed regionally. Moreover, with rational integration of luminescent RE3+ ions, a single particle with multiplexed upconversion emissions in wavelength and lifetime domains is demonstrated, which provides a unique platform for optical multiplexing applications.
RESUMEN
Dynamic reconstruction of metal sulphides during electrocatalytic oxygen evolution reaction (OER) has hampered the acquisition of legible evidence for comprehensively understanding the phase-transition mechanism and electrocatalytic activity origin. Herein, modelling on a series of cobalt-nickel bimetallic sulphides, we for the first time establish an explicit and comprehensive picture of their dynamic phase evaluation pathway at the pre-catalytic stage before OER process. By utilizing the in-situ electrochemical transmission electron microscopy and electron energy loss spectroscopy, the lattice sulphur atoms of (NiCo)S1.33 particles are revealed to be partially substituted by oxygen from electrolyte to form a lattice oxygen-sulphur coexisting shell surface before the generation of reconstituted active species. Such S-O exchange process is benefitted from the subtle modulation of metal-sulphur coordination form caused by the specific Ni and Co occupation. This unique oxygen-substitution behaviour produces an (NiCo)OxS1.33-x surface to reduce the energy barrier of surface reconstruction for converting sulphides into active oxy/hydroxide derivative, therefore significantly increasing the proportion of lattice oxygen-mediated mechanism compared to the pure sulphide surface. We anticipate this direct observation can provide an explicit picture of catalysts' structural and compositional evolution during the electrocatalytic process.
RESUMEN
The spoilage and forgery of perishable products such as food, drugs, and vaccines cause serious health hazards and economic loss every year. Developing highly efficient and convenient time-temperature indicators (TTIs) to realize quality monitoring and anticounterfeiting simultaneously is urgent but remains a challenge. To this end, a kind of colorimetric fluorescent TTI, based on CsPbBr3@SiO2 nanoparticles with tunable quenching kinetics, is developed. The kinetics rate of the CsPbBr3-based TTIs is easily regulated by adjusting temperature, concentration of the nanoparticles, and addition of salts, stemming from the cation exchange effect, common-ion effect, and structural damage by water. Typically, when combined with europium complexes, the developed TTIs show an irreversible dynamic change in fluorescent colors from green to red upon increasing temperature and time. Furthermore, a locking encryption system with multiple logics is also realized by combining TTIs with different kinetics. The correct information only appears at specific ranges of time and temperature under UV light and is irreversibly self-erased afterward. The simple and low-cost composition and the ingenious design of kinetics-tunable fluorescence in this work stimulate more insights and inspiration toward intelligent TTIs, especially for high-security anticounterfeiting and quality monitoring, which is really conducive to ensuring food and medicine safety.
RESUMEN
As an important lanthanide (Ln)-based functional materials, the Ln chalcogenides possess unique properties and various applications. However, the controllable synthesis of Ln chalcogenide nanocrystals still faces great challenges because of the rather poor affinity between Ln and chalcogenide ions (S, Se, Te) as well as strong preference of combination with existed oxygen. Herein, a facile but general heterogeneous nucleation synthetic strategy is established toward a series of colloidal ternary Cu Ln sulfides nanocrystals using the Ln dithiocarbamates and CuI as precursors. To extend this synthetic protocol, similar strategy is used to prepare six kinds of high quality CuLnS2 nanocrystals, while the bulk ones are only obtained by the traditional solid-state reaction at rigorous condition. Importantly, high-entropy nanocrystals CuLnS2 and CuEux Ln2-x S3 which contain six Ln elements (Nd, Sm, Gd, Tb, Dy) are readily obtained by the co-decomposed process attributed to their similar diffusion speed. As a proof-of-concept application, CuEu2 S3 nanocrystals showed efficient photocatalytic hydrogen production properties.