RESUMEN
Natural dissipative assembly (DSA) often exhibit energy-driven shifts in natural functions. However, creating man-made DSA that can mimic such biological activities transformation remains relatively rare. Herein, we introduce a cytomembrane-like dissipative assembly system based on chiral supramolecules. This system employs benzoyl cysteine in an out of equilibrium manner, enabling the shifts in biofunctions while minimizing material use. Specifically, aroyl-cystine derivatives primarily assemble into stable M-helix nanofibers under equilibrium conditions. These nanofibers enhance fibroblast adhesion and proliferation through stereospecific interactions with chiral cellular membranes. Upon the addition of chemical fuels, these functional nanofibers temporarily transform into non-equilibrium nanospheres, facilitating efficient drug delivery. Subsequently, these nanospheres revert to their original nanofiber state, effectively recycling the drug. The programmable function-shifting ability of this DSA establishes it as a novel, fuel-driven drug delivery vehicle. And the bioactive DSA not only addresses a gap in synthetic DSAs within biological applications but also sets the stage for innovative designs of 'living' materials.
RESUMEN
Clinically, chronic pain and depression often coexist in multiple diseases and reciprocally reinforce each other, which greatly escalates the difficulty of treatment. The neural circuit mechanism underlying the chronic pain/depression comorbidity remains unclear. The present study reports that two distinct subregions in the paraventricular thalamus (PVT) play different roles in this pathological process. In the first subregion PVT posterior (PVP), glutamatergic neurons (PVPGlu) send signals to GABAergic neurons (VLPAGGABA) in the ventrolateral periaqueductal gray (VLPAG), which mediates painful behavior in comorbidity. Meanwhile, in another subregion PVT anterior (PVA), glutamatergic neurons (PVAGlu) send signals to the nucleus accumbens D1-positive neurons and D2-positive neurons (NAcD1âD2), which is involved in depression-like behavior in comorbidity. This study demonstrates that the distinct thalamo-subcortical circuits PVPGluâVLPAGGABA and PVAGluâNAcD1âD2 mediated painful behavior and depression-like behavior following spared nerve injury (SNI), respectively, which provides the circuit-based potential targets for preventing and treating comorbidity.
RESUMEN
Orthopedic conditions have emerged as global health concerns, impacting approximately 1.7 billion individuals worldwide. However, the limited understanding of the underlying pathological processes at the cellular and molecular level has hindered the development of comprehensive treatment options for these disorders. The advent of single-cell RNA sequencing (scRNA-seq) technology has revolutionized biomedical research by enabling detailed examination of cellular and molecular diversity. Nevertheless, investigating mechanisms at the single-cell level in highly mineralized skeletal tissue poses technical challenges. In this comprehensive review, we present a streamlined approach to obtaining high-quality single cells from skeletal tissue and provide an overview of existing scRNA-seq technologies employed in skeletal studies along with practical bioinformatic analysis pipelines. By utilizing these methodologies, crucial insights into the developmental dynamics, maintenance of homeostasis, and pathological processes involved in spine, joint, bone, muscle, and tendon disorders have been uncovered. Specifically focusing on the joint diseases of degenerative disc disease, osteoarthritis, and rheumatoid arthritis using scRNA-seq has provided novel insights and a more nuanced comprehension. These findings have paved the way for discovering novel therapeutic targets that offer potential benefits to patients suffering from diverse skeletal disorders.
Asunto(s)
Análisis de Secuencia de ARN , Análisis de la Célula Individual , Humanos , Análisis de Secuencia de ARN/métodos , Análisis de la Célula Individual/métodos , Enfermedades Óseas/terapia , Enfermedades Óseas/fisiopatología , Huesos , Biología Computacional/métodosRESUMEN
Hydrogen peroxide (H2O2) and viscosity play vital roles in the cellular environment as signaling molecule and microenvironment parameter, respectively, and are associated with many physiological and pathological processes in biological systems. We developed a near-infrared fluorescent probe, CQ, which performed colorimetric and ratiometric detection of H2O2 and viscosity based on the FRET mechanism, and was capable of monitoring changes in viscosity and H2O2 levels simultaneously through two different channels. Based on the specific reaction of H2O2 with borate ester, CQ exhibited a significant ratiometric response to H2O2 with a large Stokes shift of 221 nm, a detection limit of 0.87 µM, a near-infrared emission wavelength of 671 nm, a response time of 1 h, a wide detection ranges of 0.87-800 µM and a high energy transfer efficiency of 99.9 %. CQ could also recognize viscosity by the TICT mechanism, and efficiently detect viscosity changes caused by food thickeners. More importantly, CQ could successfully detect endogenous/exogenous H2O2 and viscosity in live HeLa cells, which was expected to be a practical tool for detecting H2O2 and viscosity in live cells.
Asunto(s)
Transferencia Resonante de Energía de Fluorescencia , Colorantes Fluorescentes , Peróxido de Hidrógeno , Peróxido de Hidrógeno/análisis , Peróxido de Hidrógeno/química , Colorantes Fluorescentes/química , Humanos , Células HeLa , Transferencia Resonante de Energía de Fluorescencia/métodos , Viscosidad , Rayos Infrarrojos , Límite de Detección , Supervivencia CelularRESUMEN
Acute kidney injury (AKI) represents a significant challenge to global public health problem and is associated with poor outcomes. There is still considerable debate about the effect of mean blood glucose (MBG) and coefficient of variation (CV) of blood glucose on the short-term mortality of AKI patients. This retrospective cohort study aimed to explore the association between glycemic variability and short-term mortality in patients with AKI. Data from the Medical Information Mart for Intensive Care IV (MIMIC-IV) database were analyzed, including 6,777 adult AKI patients. MBG and CV on the first day of ICU admission were calculated to represent the overall glycemic status and variability during the ICU stay in AKI patients. The primary outcome indicator was ICU 30-day mortality of AKI patients. Multivariate Cox regression analysis and smoothed curve fitting were used to assess the relationship between blood glucose levels and mortality. Eventually, the ICU 30-day mortality rate of AKI patients was 23.5%. The increased MBG and CV were significantly correlated with ICU 30-day mortality (hazards ratio (HR) = 1.20, 95% confidence interval (CI) 1.14-1.27; HR = 1.08, 95% CI 1.03-1.13). The smoothed curve fitting showed a U-shaped relationship between MBG on the first day of ICU admission and ICU 30-day mortality (inflection point = 111.3 mg/dl), while CV had a linear relationship with 30-day ICU mortality. Thus, we conclude that MBG and CV were significantly associated with short-term mortality in intensive care patients with AKI. Tighter glycemic control may be an effective measure to improve the prognosis of patients with AKI.
Asunto(s)
Lesión Renal Aguda , Glucemia , Adulto , Humanos , Estudios Retrospectivos , Unidades de Cuidados Intensivos , Cuidados CríticosRESUMEN
2D perovskites have shown great potential toward stable and efficient photovoltaic devices. However, the crystal orientation and phase impurity issues of 2D perovskite films originating from the anisotropic crystal structure and specific growth mechanism have demoted their optoelectronic performances. Here, the surface crystallization modulation technique is introduced to fabricate the high-quality 2D perovskite films with both vertical crystal orientation and high phase purity by regulating the crystallization dynamics. The solvent atmosphere condition is instituted during film processing, which promotes the formation of an oriented 2D perovskite layer in stoichiometric composition at the vapor-liquid interface and templates the subsequent film growth. The solar cells based on the optimized 2D perovskite films exhibit a power conversion efficiency of 15.04%, the record for 2D perovskites (with the perovskite slab thickness n ≤ 3 and high phase purity). The solar cells based on the highly-oriented and phase-pure 2D perovskite films also demonstrate excellent thermal and humidity stabilities.
RESUMEN
BACKGROUND: Sulfur dioxide (SO2) is a common gaseous pollutant that significantly threatens environmental pollution and human health. Meanwhile, viscosity is an essential parameter of the intracellular microenvironment, manipulating many physiological roles such as nutrient transport, metabolism, signaling regulation and apoptosis. Currently, most of the fluorescent probes used for detecting SO2 derivatives and viscosity are single-emission probes or probes based on the ICT mechanism, which suffer from short emission wavelengths, small Stokes shifts or susceptibility to environmental background. Therefore, the development of powerful high-performance probes for real-time monitoring of sulfur dioxide derivatives and viscosity is of great significance for human health. RESULTS: In this research, we designed the fluorescent probe QQC to detect SO2 derivatives and viscosity based on FRET platform with quinolinium salt as donor and quinolinium-carbazole as acceptor. QQC exhibited a ratiometric fluorescence response to SO2 with a low detection limit (0.09 µM), large Stokes shift (186 nm) and high energy transfer efficiency (95 %), indicating that probe QQC had good sensitivity and specificity. In addition, QQC was sensitive to viscosity, with an 9.10-folds enhancement of orange fluorescence and an excellent linear relationship (R2 = 0.98) between the logarithm of fluorescence intensity at 592 nm and viscosity. Importantly, QQC could not only recognize SO2 derivatives in real water samples and food, but also detect viscosity changes caused by food thickeners and thereby had broad market application prospects. SIGNIFICANCE: We have developed a ratiometric fluorescent probe based on the FRET platform for detecting sulfur dioxide derivatives and viscosity. QQC could not only successfully detect SO2 derivatives in food and water samples, but also be made into test strips for detecting HSO3-/SO32- solution. In addition, the probe was also used to detect viscosity changes caused by food thickeners. Therefore, this novel probe had significant value in food and environmental detection applications.
Asunto(s)
Colorantes Fluorescentes , Dióxido de Azufre , Humanos , Transferencia Resonante de Energía de Fluorescencia , Viscosidad , Agua , Células HeLaRESUMEN
Conditionally activated molecule release in live cells would provide spatiotemporal control for the study and intervention of biological processes, e.g., bioactive molecule monitoring and controlled drug release. Mitochondria are the main sites of reactive oxygen species (ROS) production in cells. Here, we report an ROS-triggered molecule release strategy in mitochondria. A molecule IRTO with dual targeting groups was designed by covalently linking IR-780 (a mitochondrial targeted heptamethine cyanine) and 4-aminobutyl-thiazole orange (NH2-TO, a nuclear dye). IRTO diffused into live cells and first accumulated in mitochondria. As the cyanine moiety reacted with mitochondrial ROS directly or with the help of mitochondrial cytochromes, NH2-TO was released, escaped from mitochondria, and finally located in the nucleus. This process could be visualized by fluorescent imaging, i.e., red fluorescence (from the cyanine moiety of IRTO) first located in mitochondria, and green fluorescence (from NH2-TO) appeared and gradually enhanced in the nucleus with the increase of incubation time. The addition of H2O2 or lipopolysaccharide (LPS, an ROS accelerator) could accelerate the release of NH2-TO, whereas N-acetyl-l-cysteine (NAC, an ROS inhibitor) and mitoquinone mesylate (MitoQ, a mitochondrial ROS scavenger) could obviously decrease the release of NH2-TO. These results suggest that IRTO could serve as a fluorescent probe for monitoring ROS in mitochondria and that IR-780 might be a promising endogenous ROS-triggered molecule release platform.
Asunto(s)
Peróxido de Hidrógeno , Mitocondrias , Especies Reactivas de Oxígeno , Colorantes Fluorescentes , Acetilcisteína/farmacologíaRESUMEN
Two-dimensional (2D) covalent organic frameworks (COFs) with hierarchical porosity have been increasingly recognized as promising materials in various fields. Besides, the 2D COFs with kagome (kgm) topology can exhibit unique optoelectronic features and have extensive applications. However, rational synthesis of the COFs with kgm topology remains challenging because of competition with a square-lattice topology. Herein, we report two isomeric dual-pore 2D COFs with kgm topology using a novel geometric strategy to reduce the symmetry of their building blocks, which are four-armed naphthalene-based and azulene-based isomeric monomers. Owing to the large dipole moment of azulene, as-prepared azulene-based COF (COF-Az) possesses a considerably narrow band gap of down to 1.37 eV, which is much narrower than the naphthalene-based 2D COF (COF-Nap: 2.28 eV) and is the lowest band gap among reported imine-linked dual-pore 2D COFs. Moreover, COF-Az was used as electrode material in a gas sensor and exhibits high selectivity for NO2, including a high response rate (58.7%) to NO2 (10 ppm), fast recovery (72 s), up to 10 weeks of stability, and resistance to 80% relative humidity, which are superior to those of reported COF-based NO2 gas sensors. The calculation and in situ experimental results indicate that the large dipole moment of azulene boosts the sensitivity of the imine linkages. The usage of isomeric building blocks not only enables the synthesis of 2D COFs with isometric kgm topology but also provides an azulene-based 2D platform for studying the structure-property correlations of COFs.
RESUMEN
BACKGROUND: Plant virus vectors designed for virus-mediated protein overexpression (VOX), virus-induced gene silencing (VIGS), and genome editing (VIGE) provide rapid and cost-effective tools for functional genomics studies, biotechnology applications and genome modification in plants. We previously reported that a cassava common mosaic virus (CsCMV, genus Potexvirus)-based VIGS vector was used for rapid gene function analysis in cassava. However, there are no VOX and VIGE vectors available in cassava. RESULTS: In this study, we developed an efficient VOX vector (CsCMV2-NC) for cassava by modifying the CsCMV-based VIGS vector. Specifically, the length of the duplicated putative subgenomic promoter (SGP1) of the CsCMV CP gene was increased to improve heterologous protein expression in cassava plants. The modified CsCMV2-NC-based VOX vector was engineered to express genes encoding green fluorescent protein (GFP), bacterial phytoene synthase (crtB), and Xanthomonas axonopodis pv. manihotis (Xam) type III effector XopAO1 for viral infection tracking, carotenoid biofortification and Xam virulence effector identification in cassava. In addition, we used CsCMV2-NC to deliver single guide RNAs (gMePDS1/2) targeting two loci of the cassava phytoene desaturase gene (MePDS) in Cas9-overexpressing transgenic cassava lines. The CsCMV-gMePDS1/2 efficiently induced deletion mutations of the targeted MePDS with the albino phenotypes in systemically infected cassava leaves. CONCLUSIONS: Our results provide a useful tool for rapid and efficient heterologous protein expression and guide RNA delivery in cassava. This expands the potential applications of CsCMV-based vector in gene function studies, biotechnology research, and precision breeding for cassava.
RESUMEN
Incorporating plasticizers is an effective way to facilitate conduction of ions in solid polymer electrolytes (SPEs). However, this conductivity enhancement often comes at the cost of reduced mechanical properties, which can make the electrolyte membrane more difficult to process and increase safety hazards. Here, a novel crosslinking strategy, wherein metal-alkoxy-terminated polymers can be crosslinked by precisely controlling the content of H2 O as an initiator, is proposed. As a proof-of-concept, trimethylaluminum (TMA)-functionalized poly(ethylene oxide) (PEO) is used to demonstrate that ultrafine Al-O nanoclusters can serve as nodes to crosslink PEO chains with a wide range of molecular weights from 10 000 to 8 000 000 g mol-1 . The crosslinked polymer network can incorporate a high concentration of plasticizers, with a total weight percentage over 75%, while still maintaining excellent stretchability (4640%) and toughness (3.87 × 104 kJ m-3 ). The resulting electrolyte demonstrates high ionic conductivity (1.41 mS cm-1 ), low interfacial resistance toward Li metal (48.1 Ω cm2 ), and a wide electrochemical window (>4.8 V vs Li+ /Li) at 30 °C. Furthermore, the LiFePO4 /Li battery shows stable cycle performance with a capacity retention of 98.6% (146.3 mAh g-1 ) over 1000 cycles at 1C (1C = 170 mAh g-1 ) at 30 °C.
RESUMEN
Understanding the atomistic mechanisms of non-equilibrium processes during solid-state synthesis, such as nucleation and grain structure formation of a layered oxide phase, is a critical challenge for developing promising cathode materials such as Ni-rich layered oxide for Li-ion batteries. In this study, we found that the aluminum oxide coating layer transforms into lithium aluminate as an intermediate, which has favorable low interfacial energies with the layered oxide to promote the nucleation of the latter. The fast and uniform nucleation and formation of the layered oxide phase at relatively low temperatures were evidenced using solid-state nuclear magnetic resonance and in situ synchrotron X-ray diffraction. The resulting Ni-rich layered oxide cathode has fine primary particles, as visualized by three-dimensional tomography constructed using a focused-ion beam and scanning electron microscopy. The densely packed fine primary particles enable the excellent mechanical strength of the secondary particles, as demonstrated by in situ compression tests. This strategy provides a new approach for developing next-generation, high-strength battery materials.
RESUMEN
High-voltage lithium cobalt oxide (LiCoO2) has the highest volumetric energy density among commercial cathode materials in lithium-ion batteries due to its high working voltage and compacted density. However, under high voltage (4.6 V), the capacity of LiCoO2 fades rapidly due to parasitic reactions of high-valent cobalt with the electrolyte and the loss of lattice oxygen at the interface. In this study, we report a temperature-driven anisotropic doping phenomenon of Mg2+ that results in surface-populated Mg2+ doping to the side of the (003) plane of LiCoO2. Mg2+ dopants enter the Li+ sites, lower the valence state of Co ions with less hybridization between the O 2p and Co 3d orbitals, promote the formation of surface Li+/Co2+ anti-sites, and suppress lattice oxygen loss on the surface. As a result, the modified LiCoO2 demonstrates excellent cycling performance under 4.6 V, reaching an energy density of 911.2 Wh/kg at 0.1C and retaining 92.7% (184.3 mAh g-1) of its capacity after 100 cycles at 1C. Our results highlight a promising avenue for enhancing the electrochemical performance of LiCoO2 by anisotropic surface doping with Mg2+.
RESUMEN
Reticular chemistry provides opportunities to design solid-state electrolytes (SSEs) with modular tunability. However, SSEs based on modularly designed crystalline metal-organic frameworks (MOFs) often require liquid electrolytes for interfacial contact. Monolithic glassy MOFs can have liquid processability and uniform lithium conduction, which is promising for the reticular design of SSE without liquid electrolytes. Here, we develop a generalizable strategy for the modular design of noncrystalline SSEs based on a bottom-up synthesis of glassy MOFs. We demonstrate such a strategy by linking polyethylene glycol (PEG) struts and nanosized titanium-oxo clusters into network structures termed titanium alkoxide networks (TANs). The modular design allows the incorporation of PEG linkers with different molecular weights, which give optimal chain flexibility for high ionic conductivity, and the reticular coordinative network provides a controlled degree of cross-linking that gives adequate mechanical strength. This research shows the power of reticular design in noncrystalline molecular framework materials for SSEs.
RESUMEN
Partitioning of americium from lanthanides (Ln) present in used nuclear fuel plays a key role in the sustainable development of nuclear energy1-3. This task is extremely challenging because thermodynamically stable Am(III) and Ln(III) ions have nearly identical ionic radii and coordination chemistry. Oxidization of Am(III) to Am(VI) produces AmO22+ ions distinct with Ln(III) ions, which has the potential to facilitate separations in principle. However, the rapid reduction of Am(VI) back to Am(III) by radiolysis products and organic reagents required for the traditional separation protocols including solvent and solid extractions hampers practical redox-based separations. Herein, we report a nanoscale polyoxometalate (POM) cluster with a vacancy site compatible with the selective coordination of hexavalent actinides (238U, 237Np, 242Pu and 243Am) over trivalent lanthanides in nitric acid media. To our knowledge, this cluster is the most stable Am(VI) species in aqueous media observed so far. Ultrafiltration-based separation of nanoscale Am(VI)-POM clusters from hydrated lanthanide ions by commercially available, fine-pored membranes enables the development of a once-through americium/lanthanide separation strategy that is highly efficient and rapid, does not involve any organic components and requires minimal energy input.
RESUMEN
Biodiversity is essential for maintaining the terrestrial ecosystem multifunctionality (EMF). Recent studies have revealed that the variations in terrestrial ecosystem functions are captured by three key axes: the maximum productivity, water use efficiency, and carbon use efficiency of the ecosystem. However, the role of biodiversity in supporting these three key axes has not yet been explored. In this study, we combined the (i) data collected from more than 840 vegetation plots across a large climatic gradient in China using standard protocols, (ii) data on plant traits and phylogenetic information for more than 2,500 plant species, and (iii) soil nutrient data measured in each plot. These data were used to systematically assess the contribution of environmental factors, species richness, functional and phylogenetic diversity, and community-weighted mean (CWM) and ecosystem traits (i.e., traits intensity normalized per unit land area) to EMF via hierarchical partitioning and Bayesian structural equation modeling. Multiple biodiversity attributes accounted for 70% of the influence of all the variables on EMF, and ecosystems with high functional diversity had high resource use efficiency. Our study is the first to systematically explore the role of different biodiversity attributes, including species richness, phylogenetic and functional diversity, and CWM and ecosystem traits, in the key axes of ecosystem functions. Our findings underscore that biodiversity conservation is critical for sustaining EMF and ultimately ensuring human well-being.
Asunto(s)
Biodiversidad , Ecosistema , Humanos , Filogenia , Teorema de Bayes , Agua , SueloRESUMEN
Hexagonal boron nitride (h-BN) is regarded as one of the most efficient catalysts for oxidative dehydrogenation of propane (ODHP) with high olefin selectivity and productivity. However, the loss of the boron component under a high concentration of water vapor and high temperature seriously hinders its further development. How to make h-BN a stable ODHP catalyst is one of the biggest scientific challenges at present. Herein, we construct h-BNâxIn2O3 composite catalysts through the atomic layer deposition (ALD) process. After high-temperature treatment in ODHP reaction conditions, the In2O3 nanoparticles (NPs) are dispersed on the edge of h-BN and observed to be encapsulated by ultrathin boron oxide (BOx) overlayer. A novel strong metal oxide-support interaction (SMOSI) effect between In2O3 NPs and h-BN is observed for the first time. The material characterization reveals that the SMOSI not only improves the interlayer force between h-BN layers with a pinning model but also reduces the affinity of the B-N bond toward O⢠for inhibiting oxidative cutting of h-BN into fragments at a high temperature and water-rich environment. With the pinning effect of the SMOSI, the catalytic stability of h-BNâ70In2O3 has been extended nearly five times than that of pristine h-BN, and the intrinsic olefin selectivity/productivity of h-BN is well maintained.
RESUMEN
Quantifying and predicting variation in gross primary productivity (GPP) is important for accurate assessment of the ecosystem carbon budget under global change. Scaling traits to community scales for predicting ecosystem functions (i.e., GPP) remain challenging, while it is promising and well appreciated with the rapid development of trait-based ecology. In this study, we aim to integrate multiple plant traits with the recently developed trait-based productivity (TBP) theory, verify it via Bayesian structural equation modeling (SEM) and complementary independent effect analysis. We further distinguish the relative importance of different traits in explaining the variation in GPP. We apply the TBP theory based on plant community traits to a multi-trait dataset containing more than 13,000 measurements of approximately 2,500 species in Chinese forest and grassland systems. Remarkably, our SEM accurately predicts variation in annual and monthly GPP across China (R2 values of 0.87 and 0.73, respectively). Plant community traits play a key role. This study shows that integrating multiple plant functional traits into the TBP theory strengthens the quantification of ecosystem primary productivity variability and further advances understanding of the trait-productivity relationship. Our findings facilitate integration of the growing plant trait data into future ecological models.
Asunto(s)
Ecología , Ecosistema , Teorema de Bayes , BosquesRESUMEN
BACKGROUND: Hepatocellular carcinoma (HCC) is associated with a high occurrence, mortality, and poor prognosis. MLX interacting protein like (MLXIPL) is an important regulator of glucolipid metabolism and is involved in tumor progression. We aimed to clarify the role of MLXIPL in HCC and its underlying mechanisms. METHODS: The level of MLXIPL was predicted using bioinformatic analysis and verified using quantitative real-time PCR (qPCR), immunohistochemical analysis, and western blot. We assessed the effects of MLXIPL on biological behaviors using the cell counting kit-8, colony formation, and Transwell assay. Glycolysis was evaluated using the Seahorse method. The interaction between MLXIPL and mechanistic target of rapamycin kinase (mTOR) was confirmed using RNA immunoprecipitation and co-immunoprecipitation. mTOR expression was detected in HCC cells using qPCR, immunofluorescence analysis, and western blot. RESULTS: The results showed that MLXIPL levels were elevated in both HCC tissues and HCC cell lines. Knockdown of MLXIPL impeded HCC cell growth, invasion, migration, and glycolysis. Moreover, MLXIPL combined with mTOR to induce phosphorylation of mTOR. Activated mTOR abrogated the effects on cellular processes induced by MLXIPL. CONCLUSION: MLXIPL promoted the malignant progression of HCC by activating phosphorylation of mTOR, suggesting an important role of the combination of MLXIPL and mTOR in HCC.
Asunto(s)
Factores de Transcripción Básicos con Cremalleras de Leucinas y Motivos Hélice-Asa-Hélice , Carcinoma Hepatocelular , Neoplasias Hepáticas , Serina-Treonina Quinasas TOR , Humanos , Carcinoma Hepatocelular/patología , Línea Celular Tumoral , Movimiento Celular/genética , Proliferación Celular/genética , Regulación Neoplásica de la Expresión Génica , Glucólisis , Neoplasias Hepáticas/patología , Procesos Neoplásicos , Fosforilación , Serina-Treonina Quinasas TOR/metabolismo , Factores de Transcripción/genética , Factores de Transcripción Básicos con Cremalleras de Leucinas y Motivos Hélice-Asa-Hélice/metabolismoRESUMEN
Skin cancer has a high mortality rate, and early detection can greatly reduce patient mortality. Convolutional neural network (CNN) has been widely applied in the field of computer-aided diagnosis. To improve the ability of convolutional neural networks to accurately classify skin lesions, we propose a multiscale feature fusion model for skin lesion classification. We use a two-stream network, which are a densely connected network (DenseNet-121) and improved visual geometry group network (VGG-16). In the feature fusion module, we construct multireceptive fields to obtain multiscale pathological information and use generalized mean pooling (GeM pooling) to reduce the spatial dimensionality of lesion features. Finally, we built and tested a system with the developed skin lesion classification model. The experiments were performed on the dataset ISIC2018, which can achieve a good classification performance with a test accuracy of 91.24% and macroaverages of 95%.