Intervention portfolios analysis of Plasmodium vivax control in central China.

BACKGROUND: The effects of a diverse spectrum of malaria interventions were evaluated through a deterministic Plasmodium vivax transmission model. This approach aimed to provide theoretical evidence of the performance of these interventions once implemented for achieving malaria elimination. METHODS: An integrated intervention portfolio, including mass drug administration, insecticide treatment, and untreated bed nets, was analyzed through modeling. Additionally, data-driven calibration was implemented to infer coverages that effectively reproduced historical malaria patterns in China from 1971 to 1983. RESULTS: MDA utilizing primaquine emerged as the most effective single intervention, achieving a 70% reduction in malaria incidence when implemented at full coverage. Furthermore, a strategic combination of MDA with primaquine, chloroquine, untreated bed nets, and seasonal insecticide treatments effectively eradicated malaria, attaining elimination at a coverage level of 70%. It was conclusively demonstrated that an integrated approach combining MDA and vector control measures is essential for the successful elimination of malaria. CONCLUSION: High coverage of mass drug administration with primaquine and chloroquine before transmission was the key driver of the malaria decline in China from 1971 to 1983. The best-fit intervention coverage combinations derived from calibration are provided as a reference for malaria control in other countries.

Phthalate Acid Esters (PAEs) in Indoor Dust from Decoration Material Stores: Occurrence, Sources, and Health Risks.

Phthalate acid esters (PAEs) are one of the most widely used plasticizers globally, extensively employed in various decoration materials. However, studies on the impact of these materials on indoor environmental PAE pollution and their effects on human health are limited. In this study, forty dust samples were collected from four types of stores specializing in decoration materials (flooring, furniture boards, wall coverings, and household articles). The levels, sources, exposure doses, and potential health risks of PAEs in dust from decoration material stores were assessed. The total concentrations of Σ9PAE (the sum of nine PAEs) in dust from all decoration-material stores ranged from 46,100 ng/g to 695,000 ng/g, with a median concentration of 146,000 ng/g. DMP, DEP, DBP, and DEHP were identified as the predominant components. Among all stores, furniture board stores exhibited the highest Σ9PAE (159,000 ng/g, median value), while flooring stores exhibited the lowest (95,300 ng/g). Principal component analysis (PCA) showed that decoration materials are important sources of PAEs in the indoor environment. The estimated daily intakes of PAEs through non-dietary dust ingestion and dermal-absorption pathways among staff in various decoration-material stores were 60.0 and 0.470 ng/kg-bw/day (flooring stores), 113 and 0.780 ng/kg-bw/day (furniture board stores), 102 and 0.510 ng/kg-bw/day (wall covering stores), and 114 and 0.710 ng/kg-bw/day (household article stores). Particularly, staff in wall-covering and furniture-board stores exhibited relatively higher exposure doses of DEHP. Risk assessment indicated that although certain PAEs posed potential health risks, the exposure levels for staff in decoration material stores were within acceptable limits. However, staff in wall covering stores exhibited relatively higher risks, necessitating targeted risk-management strategies. This study provides new insights into understanding the risk associated with PAEs in indoor environments.

Impact of COVID-19 on the neglected tropical diseases: a scoping review.

BACKGROUND: This study investigates the impact of the COVID-19 pandemic on the prevalence, management, and control of the neglected tropical diseases (NTDs) highlighting the current or prospective impact of COVID-19 on research and development funding for, and execution of, NTD programmes. This review was conducted to determine if, and how, NTDs were affected by COVID-19, and whether those effects will delay the elimination goals of the Sustainable Development goals. METHODS: Using open-source available data from policy and documentation from official websites of the relevant stakeholders including but not limited to World Health Organization (WHO) documents and policies, government foreign aid documents, and the Policy Cures G-Finder reports, this scoping review explored ongoing challenges to supporting research and development (R&D) for the NTDs and in maintaining NTD control programs; examined the constraints posed for NTD management by the pandemic from disruptions to healthcare services, reduction of finance and explored the potential long-term implications and consequences for those poorer, neglected populations in low and middle income-countries (LMICs). This was done by a scoping review literature search, publications were subject to an initial practical screening step to ensure the most relevant publications were selected for full screening, with the focus on scoping the designated topic of the impact of COVID-19 on NTDs. We further undertook an evaluation of the socio-economic factors exacerbating the impact of COVID-19 on NTD burden. RESULTS: Multiple disruptions and setbacks, likely to affect NTD programmes and progress towards their elimination targets were identified in this study. R&D funding for the NTDs and AIDs and TB has declined since the funding high point of 2019, and for malaria since the high point of 2018. Significant changes in allocation of R&D funding within the NTDs are observed post pandemic, likely because of prioritization among donors. Diseases for which the least R&D investment was reported in place, prior to the pandemic (mycetoma, taeniasis/cysticercosis, trachoma and Buruli ulcer) have been particularly impacted post pandemic. We identified specific NTDs including schistosomiasis, leprosy, and rabies that have been affected by the COVID-19 pandemic and disruptions caused to on ongoing NTD control and elimination programs. Pandemic restrictions disrupted essential medical supply manufacturing and distribution impacting immunization programs and hindered efforts to control the spread of infectious diseases. NTD programmes have experienced numerous setbacks including delays in mass drug administration programs (e.g. for schistosomiasis), cancelled or delayed vaccination programs (e.g. for rabies) and closure of testing facilities has resulted in reduced diagnosis, treatment, and disease elimination for all NTDs. Lockdowns and clinic closures causing disruption to essential healthcare services restricted NTD surveillance and treatment programs. Community fears around contracting COVID-19 exacerbated the constraints to service delivery. Disparities in global vaccine distribution have widened with LMICs facing limited access to vaccines and disruption to immunization programs. Finally, the pandemic has led to increased poverty with poor and marginalized communities, impacting nutrition, healthcare access and education all of which have long term implications for NTD management and control. CONCLUSIONS: The COVID-19 pandemic profoundly impacted global health research and global health equity. Attention and funding were diverted from all sectors, significantly affecting research and development efforts set out in the World Health Organization's NTD elimination Roadmaps. Ongoing changes to funding, economic crises, logistics and supply chain disruptions as well as deepening poverty has put a strain on already weak healthcare systems and exacerbated LMIC healthcare challenges. In particular, the delays and constraints to NTD management and elimination programs will have long-reaching consequences highlighting the need for global cooperation and renewed investment to put the NTD roadmap back on track. Targets and milestones are unlikely to be met without significant investment for recovery, in place.

Accuracy improvement of two-dimensional shape reconstruction based on OFDR using first-order differential local filtering.

The accuracy of two-dimensional (2D) shape reconstruction is highly susceptible to fake peaks in the strain distribution measured by optical frequency domain reflectometry (OFDR). In this paper, a post-processing method using first-order differential local filtering is proposed to suppress fake peaks and further improve the accuracy of shape reconstruction. By analyzing the principles of 2D shape reconstruction, an explanation of how fake peaks lead to shape reconstruction errors is provided, along with the introduction of an error evaluation standard. The principle of first-order differential local filtering is presented, and its feasibility is verified by simulation. An OFDR 2D shape reconstruction system is built, with three groups of 2D shape reconstruction experiments carried out, including up bending, down bending and arch bending. The experimental results show that the end errors of the three groups of shape reconstruction are respectively reduced from 2.33%, 2.97%, and 1.07% to 0.25%, 0.78%, and 0.20%, at the shape reconstruction length of 0.5 m. The research demonstrates that the accuracy of OFDR 2D shape reconstruction can be improved by using first-order differential local filtering.

Bibliometric analysis and description of research trends in the treatment of psoriasis with biologic agents in the past two decades (2004-2023).

BACKGROUND: Biologics are essential in treating psoriasis. In recent years, the pathogenesis exploration and development of new target drugs have provided a more complete evidence-based foundation for the biological treatment of psoriasis. This study aims to use bibliometrics to analyze the research status and development trends of biologics in psoriasis. METHODS: The bibliometric analysis of publications related to biologics in psoriasis from 2004 to 2023 was conducted using the Web of Science Core Collection (WoSCC) database as the search data source. To perform the bibliometric analysis and create visual knowledge graphs, CiteSpace, the Bibliometrix R package, and VOSviewers were utilized. RESULTS: The study included a total of 3800 articles. The United States had the highest number of publications. The leading authors and institutions were Steven R. Feldman and the University of Manchester, respectively, in the global partnership. The cluster plot divided all keywords into 11 categories. Currently, Secukinumab and Guselkumab are representative biological agents being studied due to their considerable efficacy and long-term safety. CONCLUSIONS: Targeted therapy has emerged as a significant trend in the current treatment of psoriasis. Early and active use of biologics can effectively control disease progression, prevent or delay the occurrence of comorbidities, and may even alter the natural course of psoriasis. However, further investigation is required to fully understand the specific mechanisms of psoriasis and the use of biological agents.

Efficient degradation of venlafaxine using intimately coupled high-active crystal facets exposed TiO2 and biodegradation system: Kinetic studies, biofilm stress behavior and transformation mechanism.

Intimately coupled photocatalysis and biodegradation (ICPB) system is a potential wastewater treatment technology, of which TiO2-based ICPB system has been widely studied. There are many ways to improve the degradation efficiency of the ICPB process, but no crystal facet engineering method has been reported yet. In this work, a new ICPB system coated with NaF-TiO2 exposing high energy facets was designed to degrade biorecalcitrant psychotropic drug - venlafaxine (VNF). Initially, the TiO2 crystal surface was modified with NaF, resulting in the formation of NaF-TiO2 with a 14.4% increase in the exposure ratio of (001). The contribution rate of ·OH was increased by 9.5%, and the contribution rate of h+ was increased by 33.2%. Next, NaF-TiO2 was loaded onto the surface of the sponge carrier, and then the ICPB system was constructed after about 15 days of biofilm formation. After the ICPB system was acclimated with VNF, the removal rate of COD decreased significantly (the lowest was 62.7%), but that of ammonia nitrogen remained at 50.5 ± 6.0% and the extracellular polymeric substance (EPS) secretion increased by 84.1 mg/g VSS. According to the high throughput results, at the phylum level, Proteobacteria and Chloroflexi together maintain the nitrogen removal capability and structural stability of the ICPB system. The relative abundance of Bacteroidota was significantly increased by 14.2%, suggesting that there may be some correlation between Bacteroidota and certain metabolites of the anti-depressant active ingredients. At the genus level, the Thauera (3.1%∼11.5%) is the major bacterial group that secretes EPS, protecting biofilm against external influences. Most of the changes in microorganisms are consistent with the decontamination properties and macroscopic appearance of EPS in the ICPB system. Finally, the degradation efficiency of ICPB system for VNF was investigated (92.7 ± 3.8%) and it was mostly through hydroxylation and demethylation pathways, with more small molecular products detected, providing the basis for biological assimilation of VNF. Collectively, the NaF-TiO2 based ICPB system would be lucrative for the future degradation of venlafaxine.

Preferentially Biodegradable Gypsum Fibers Endowing Invisible Microporous Structures and Enhancing Osteogenic Capability of Calcium Phosphate Cements.

It is known that hydroxyapatite-type calcium phosphate cement (CPC) shows appreciable self-curing properties, but the phase transformation products often lead to slow biodegradation and disappointing osteogenic responses. Herein, we developed an innovative strategy to endow invisible micropore networks, which could tune the microstructures and biodegradation of α-tricalcium phosphate (α-TCP)-based CPC by gypsum fibers, and the osteogenic capability of the composite cements could be enhanced in vivo. The gypsum fibers were prepared via extruding the gypsum powder/carboxylated chitosan (CC) slurry through a 22G nozzle (410 µm in diameter) and collecting with a calcium salt solution. Then, the CPCs were prepared by mixing the α-TCP powder with gypsum fibers (0-24 wt %) and an aqueous solution to form self-curing cements. The physicochemical characterizations showed that injectability was decreased with an increase in the fiber contents. The µCT reconstruction demonstrated that the gypsum fiber could be distributed in the CPC substrate and produce long-range micropore architectures. In particular, incorporation of gypsum fibers would tune the ion release, produce tunnel-like pore networks in vitro, and promote new bone tissue regeneration in rabbit femoral bone defects in vivo. Appropriate gypsum fibers (16 and 24 wt %) could enhance bone defect repair and cement biodegradation. These results demonstrate that the highly biodegradable cement fibers could mediate the microstructures of conventional CPC biomaterials, and such a bicomponent composite strategy may be beneficial for expanding clinical CPC-based applications.

New insight into biodegradable macropore filler on tuning mechanical properties and bone tissue ingrowth in sparingly dissolvable bioceramic scaffolds.

Structural parameters of the implants such as shape, size, and porosity of the pores have been extensively investigated to promote bone tissue repair, however, it is unknown how the pore interconnectivity affects the bone growth behaviors in the scaffolds. Herein we systematically evaluated the effect of biodegradable bioceramics as a secondary phase filler in the macroporous networks on the mechanical and osteogenic behaviors in sparingly dissolvable bioceramic scaffolds. The pure hardystonite (HT) scaffolds with ∼550 & 800 µm in pore sizes were prepared by digital light processing, and then the Sr-doped calcium silicate (SrCSi) bioceramic slurry without and with 30 % organic porogens were intruded into the HT scaffolds with 800 µm pore size and sintered at 1150 °C. It indicated that the organic porogens could endow spherical micropores in the SrCSi filler, and the invasion of the SrCSi component could not only significantly enhance the compressive strength and modulus of the HT-based scaffolds, but also induce osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The pure HT scaffolds showed extremely slow bio-dissolution in Tris buffer after immersion for 8 weeks (∼1 % mass decay); in contrast, the SrCSi filler would readily dissolve into the aqueous medium and produced a steady mass decay (>6 % mass loss). In vivo experiments in rabbit femoral bone defect models showed that the pure HT scaffolds showed bone tissue ingrowth but the bone growth was impeded in the SrCSi-intruded scaffolds within 4 weeks; however, the group with higher porosity of SrCSi filler showed appreciable osteogenesis after 8 weeks of implantation and the whole scaffold was uniformly covered by new bone tissues after 16 weeks. These findings provide some new insights that the pore interconnectivity is not inevitable to impede bone ingrowth with the prolongation of implantation time, and such a highly biodegradable and bioactive filler intrusion strategy may be beneficial for optimizing the performances of scaffolds in bone regenerative medicine applications.

Microbial phylogenetic divergence between surface-water and sedimentary ecosystems drove the resistome profiles.

Antibiotic pollution and the evolution of antibiotic resistance genes (ARGs) are increasingly viewed as major threats to both ecosystem security and human health, and have drawn attention. This study investigated the fate of antibiotics in aqueous and sedimentary substrates and the impact of ecosystem shifts between water and sedimentary phases on resistome profiles. The findings indicated notable variations in the concentration and distribution patterns of antibiotics across various environmental phases. Based on the partition coefficient (Kd), the total antibiotic concentration was significantly greater in the surface water (1405.45 ng/L; 49.5 %) compared to the suspended particulate matter (Kd = 0.64; 892.59 ng/g; 31.4 %) and sediment (Kd = 0.4; 542.64 ng/g; 19.1 %). However, the relative abundance of ARGs in surface water and sediment was disproportionate to the abundance of antibiotics concentration, and sediments were the predominant ARGs reservoirs. Phylogenetic divergence of the microbial communities between the surface water and the sedimentary ecosystems potentially played important roles in driving the ARGs profiles between the two distinctive ecosystems. ARGs of Clinical importance; including blaGES, MCR-7.1, ermB, tet(34), tet36, tetG-01, and sul2 were significantly increased in the surface water, while blaCTX-M-01, blaTEM, blaOXA10-01, blaVIM, tet(W/N/W), tetM02, and ermX were amplified in the sediments. cfxA was an endemic ARG in surface-water ecosystems while the endemic ARGs of the sedimentary ecosystems included aacC4, aadA9-02, blaCTX-M-04, blaIMP-01, blaIMP-02, bla-L1, penA, erm(36), ermC, ermT-01, msrA-01, pikR2, vgb-01, mexA, oprD, ttgB, and aac. These findings offer a valuable information for the identification of ARGs-specific high-risk reservoirs.

Identical clinical outcomes between neutral and classic targeted alignments after high tibial osteotomy in medial meniscus posterior root tear: a prospective randomized study.

PURPOSE: This study aimed to compare the clinical and radiographic outcomes and arthroscopic findings after high tibial osteotomy (HTO) between neutral and classic targeted coronal alignments in patients with medial meniscus posterior root tears (MMPRTs). METHODS: Ninety-eight patients with MMPRT were prospectively enrolled in the final cohort and randomized into two groups. Fifty-two patients with the targeted alignment through the Fujisawa point (60-62.5% of the entire tibial plateau width measured from the medial side) during HTO were included in group A, whereas 46 patients with the targeted alignment through the point at 50-55% of the tibial plateau width were included in group B. The clinical and radiographic outcomes and second-look arthroscopic findings were statistically compared for comprehensive assessments. RESULTS: After a mean follow-up of 37.1 months, we found no significant differences between the two groups regarding the final Lysholm (p = 0.205) and Hospital for Special Surgery scores (p = 0.084). However, we only observed significant differences between the two groups in terms of the final hip-knee-ankle angle, weight-bearing line ratio, and medial proximal tibial angle (p < 0.001). Second-look arthroscopy did not reveal a significant difference in meniscal healing rate (p = 0.786). CONCLUSIONS: Performing HTO with the aim to achieve neutral alignment leads to similar clinical outcomes in patients with MMPRT compared to classic alignment. Although subsequent research is required, the current study provides clinical evidence for the safety and efficacy of the new targeted alignment during HTO, which may avoid long-term complications associated with overcorrection when using the traditional technique.

Optimized strategy for schistosomiasis elimination: results from marginal benefit modeling.

BACKGROUND: Poverty contributes to the transmission of schistosomiasis via multiple pathways, with the insufficiency of appropriate interventions being a crucial factor. The aim of this article is to provide more economical and feasible intervention measures for endemic areas with varying levels of poverty. METHODS: We collected and analyzed the prevalence patterns along with the cost of control measures in 11 counties over the last 20 years in China. Seven machine learning models, including XGBoost, support vector machine, generalized linear model, regression tree, random forest, gradient boosting machine and neural network, were used for developing model and calculate marginal benefits. RESULTS: The XGBoost model had the highest prediction accuracy with an R2 of 0.7308. Results showed that risk surveillance, snail control with molluscicides and treatment were the most effective interventions in controlling schistosomiasis prevalence. The best combination of interventions was interlacing seven interventions, including risk surveillance, treatment, toilet construction, health education, snail control with molluscicides, cattle slaughter and animal chemotherapy. The marginal benefit of risk surveillance is the most effective intervention among nine interventions, which was influenced by the prevalence of schistosomiasis and cost. CONCLUSIONS: In the elimination phase of the national schistosomiasis program, emphasizing risk surveillance holds significant importance in terms of cost-saving.

Comparison of osteogenic capability of 3D-printed bioceramic scaffolds and granules with different porosities for clinical translation.

Pore parameters, structural stability, and filler morphology of artificial implants are key factors influencing the process of bone tissue repair. However, the extent to which each of these factors contributes to bone formation in the preparation of porous bioceramics is currently unclear, with the two often being coupled. Herein, we prepared magnesium-doped wollastonite (Mg-CSi) scaffolds with 57% and 70% porosity (57-S and 70-S) via a 3D printing technique. Meanwhile, the bioceramic granules (57-G and 70-G) with curved pore topography (IWP) were prepared by physically disrupting the 57-S and 70-S scaffolds, respectively, and compared for in vivo osteogenesis at 4, 10, and 16 weeks. The pore parameters and the mechanical and biodegradable properties of different porous bioceramics were characterized systematically. The four groups of porous scaffolds and granules were then implanted into a rabbit femoral defect model to evaluate the osteogenic behavior in vivo. 2D/3D reconstruction and histological analysis showed that significant bone tissue production was visible in the central zone of porous granule groups at the early stage but bone tissue ingrowth was slower in the porous scaffold groups. The bone tissue regeneration and reconstruction capacity were stronger after 10 weeks, and the porous architecture of the 57-S scaffold was maintained stably at 16 weeks. These experimental results demonstrated that the structure-collapsed porous bioceramic is favorable for early-stage osteoconduction and that the 3D topological scaffolds may provide more structural stability for bone tissue growth for a long-term stage. These findings provide new ideas for the selection of different types of porous bioceramics for clinical bone repair.

[Change in Granulation Potential and Microbial Enrichment Characteristics of Sludge Induced by Microplastics].

Microplastics (MPs), as a new type of pollutant, are widely detected in sewage treatment plants. Currently, research on MPs in traditional sewage treatment systems has mainly been focused on the pollution level and distribution characteristics, with a lack of studying the impact of MPs on the sludge granulation. In order to explore the effect of MPs on the granulation process, a microplastic exposure test was conducted by adding polyethylene terephthalate microplastics (PET-MPs), which are widespread in the environment. The operating performance of the system, extracellular polymeric substance (EPS) composition, and flora enrichment were analyzed on the sludge granulation. The results showed that the exposure of PET-MPs significantly accelerated the sludge granulation process, whereas the increase in EPS content dominated by PN enhanced the sludge surface hydrophobicity; the granulation rate and EPS secretion were proportional to the exposed particle size. Microplastics and EPS secretions synergistically promoted the formation of granular sludge. However, continuous microplastic exposure led to deterioration of the system decontamination performance and inhibited the degradation process of pollutants, with the most negative effect of nitrite nitrogen accumulation under 250 µm PET-MPs exposure, as high as (5.08±0.24) mg·L-1. The high-throughput sequencing revealed that the microbial community diversity fell in the experimental group. The dominant bacteria at the phylum level were Proteobacteria and Bacteroidota on the sludge granulation. Rhodocyclaceae, Sphingomonadaceae, Flavobacteriaceae, and Rhodanobacteraceae promoted flocculation by increasing EPS secretion. The decrease in Comamonadaceae and Chitinophagaceae weakened the ammonia and nitrite oxidation capacity of the system, whereas the decrease in Rhodobacteraceae, Hyphomonadaceae, and Xanthomonadaceae inhibited the removal of nitrate nitrogen.

Progress towards dog-mediated rabies elimination in PR China: a scoping review.

BACKGROUND: Rabies continues to be a serious threat to global public health endangering people's health and public health safety. In the People's Republic of China, multi-sectoral and comprehensive prevention and control strategies have aimed to extensively curb human rabies transmission. Here, we examine the current state of rabies infection in China, explore strategic interventions put in place in response to WHO's ambition of "Zero rabies deaths by 2030" and critically assess the constraints and feasibility of dog-mediated rabies elimination in China. METHODS: This study analyzed and evaluated the process towards dog-mediated rabies elimination in China from five perspectives: namely, human, dog, policy, challenge, and prospects. Evidence-based data on progress of dog-mediated rabies elimination in China was derived from a number of sources; a literature search was undertaken using PubMed, Web of Science and CNKI databases, distribution data for human rabies cases as derived from the Data-center of the China Public Health Science and policy and document data were obtained from official websites of the relevant China ministries and commissions. RESULTS: The incidence of human rabies cases in China have shown a downward trend year-on-year since 2007. Implementation of a government-led, multi-sectoral "One Health" approach to combating rabies has driven down the total number of rabies deaths nationwide to around 200 in 2020. The number of provincial-level administrative divisions (PLADs) reporting human cases of rabies has also decreased to 21 in 2020, 13 of which reported less than 10 cases. Furthermore, the number of outpatient visits seeking rabies post-exposure prophylaxis has risen dramatically over the past two decades, with demand being 15 times higher than it was initially. There remain however, significant gaps in rabies elimination outcomes across the different regions of China. To date the target of achieving a canine rabies vaccination rate of > 75% has not been met. The challenges of rabies immunization of dogs and dog management in underdeveloped cities and rural areas need to be addressed together with more effective animal surveillance and rabies risk from and too wildlife and livestock. CONCLUSIONS: The Chinese government-led, multi-sectoral "One Health" approach to combating rabies and has made significant progress over the past decade. Development and adoption of more cost-effective One Health strategies can achieve more nationally beneficial rabies elimination outcomes. The ambitious target of "Zero rabies deaths by 2030" can be met through establishment of long-lasting herd immunity in dogs by means of dog mass vaccination campaigns, dog population management, epidemiological surveillance and the application of large-scale oral rabies vaccine to eliminate rabies in wild animals coupled with deployment of cost-effective human post-exposure prophylaxis, and community education.

Hydrochar mediated anaerobic digestion of bio-wastes: Advances, mechanisms and perspectives.

Bio-wastes treatment and disposal has become a challenge because of their increasing output. Given the abundant organic matter in bio-wastes, its related resource treatment methods have received more and more attention. As a promising strategy, anaerobic digestion (AD) has been widely used in the treatment of bio-wastes, during which not only methane as energy can be recovered but also their reduction can be achieved. However, AD process is generally disturbed by some internal factors (e.g., low hydrolysis efficiency and accumulated ammonia) and external factors (e.g., input pollutants), resulting in unstable AD operation performance. Recently, hydrochar was wildly found to improve AD performance when added to AD systems. This review comprehensively summarizes the research progress on the performance of hydrochar-mediated AD, such as increased methane yield, improved operation efficiency and digestate dewatering, and reduced heavy metals in digestate. Subsequently, the underlying mechanisms of hydrochar promoting AD were systematically elucidated and discussed, including regulation of electron transfer (ET) mode, microbial community structure, bio-processes involved in AD, and reaction conditions. Moreover, the effects of properties of hydrochar (e.g., feedstock, hydrothermal carbonization (HTC) temperature, HTC time, modification and dosage) on the improvement of AD performance are systematically concluded. Finally, the relevant knowledge gaps and opportunities to be studied are presented to improve the progress and application of the hydrochar-mediated AD technology. This review aims to offer some references and directions for the hydrochar-mediated AD technology in improving bio-wastes resource recovery.

Correction: Core-shell bioceramic fiber-derived biphasic granules with adjustable core compositions for tuning bone regeneration efficacy.

Correction for 'Core-shell bioceramic fiber-derived biphasic granules with adjustable core compositions for tuning bone regeneration efficacy' by Zhaonan Bao et al., J. Mater. Chem. B, 2023, 11, 2417-2430, https://doi.org/10.1039/D3TB90052E.

A triphasic biomimetic BMSC-loaded scaffold for osteochondral integrated regeneration in rabbits and pigs.

Osteochondral tissue involves cartilage, calcified cartilage and subchondral bone. These tissues differ significantly in chemical compositions, structures, mechanical properties and cellular compositions. Therefore, the repairing materials face different osteochondral tissue regeneration needs and rates. In this study, we fabricated an osteochondral tissue-inspired triphasic material, which was composed of a poly(lactide-co-glycolide) (PLGA) scaffold loaded with fibrin hydrogel, bone marrow stromal cells (BMSCs) and transforming growth factor-ß1 (TGF-ß1) for cartilage tissue, a bilayer poly(L-lactide-co-caprolactone) (PLCL)-fibrous membrane loaded with chondroitin sulfate and bioactive glass, respectively, for calcified cartilage, and a 3D-printed calcium silicate ceramic scaffold for subchondral bone. The triphasic scaffold was press-fitted into the osteochondral defects in rabbit (cylindrical defects with a diameter of 4 mm and a depth of 4 mm) and minipig knee joints (cylindrical defects with a diameter of 10 mm and a depth of 6 mm). The µ-CT and histological analysis showed that the triphasic scaffold was partly degraded, and significantly promoted the regeneration of hyaline cartilage after they were implanted in vivo. The superficial cartilage showed good recovery and uniformity. The calcified cartilage layer (CCL) fibrous membrane was in favor of a better cartilage regeneration morphology, a continuous cartilage structure and less fibrocartilage tissue formation. The bone tissue grew into the material, while the CCL membrane limited bone overgrowth. The newly generated osteochondral tissues were well integrated with the surrounding tissues too.

Environmentally relevant level of perfluorooctanoic acid affect the formation of aerobic granular sludge.

The growing increasing occurrence of perfluorooctanoic acid (PFOA) in wastewater has raised concerns about its potential impact on the environment. Nevertheless, the impact of PFOA at environmentally relevant level on the formation of aerobic granular sludge (AGS) is still a 'black box'. This study thus aims to fill this gap by comprehensive investigation of sludge properties, reactor performance and microbial community during the formation of AGS. It was found that 0.1 mg/L PFOA delayed the formation of AGS, causing relatively lower proportion of large size AGS at the end of operation process. Interestingly, the microorganisms contribute to the reactor's tolerance to PFOA by secreting more extracellular polymeric substances (EPS) to slow or block the entry of toxic substances into the cells. During the granule maturation period, the reactor nutrient removal especially chemical oxygen demand (COD) and total nitrogen (TN) were affected by PFOA, decreasing the corresponding removal efficiencies to ∼81.2% and ∼69.8%, respectively. Microbial analysis further revealed that PFOA decreased the abundances of Plasticicumulans, Thauera, Flavobacterium and Cytophagaceae_uncultured, but it has promoted Zoogloea and Betaproteobacteria_unclassified growth, which maintained the structures and functions of AGS. The above results revealed that the intrinsic mechanism of PFOA on the macroscopic representation of sludge granulation process was revealed, and it is expected to provide theoretical insights and practical support for direct adoption of municipal or industrial wastewater containing perfluorinated compounds to cultivate AGS.

Bioceramic scaffolds with triply periodic minimal surface architectures guide early-stage bone regeneration.

The pore architecture of porous scaffolds is a critical factor in osteogenesis, but it is a challenge to precisely configure strut-based scaffolds because of the inevitable filament corner and pore geometry deformation. This study provides a pore architecture tailoring strategy in which a series of Mg-doped wollastonite scaffolds with fully interconnected pore networks and curved pore architectures called triply periodic minimal surfaces (TPMS), which are similar to cancellous bone, are fabricated by a digital light processing technique. The sheet-TPMS pore geometries (s-Diamond, s-Gyroid) contribute to a 3‒4-fold higher initial compressive strength and 20%-40% faster Mg-ion-release rate compared to the other-TPMS scaffolds, including Diamond, Gyroid, and the Schoen's I-graph-Wrapped Package (IWP) in vitro. However, we found that Gyroid and Diamond pore scaffolds can significantly induce osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). Analyses of rabbit experiments in vivo show that the regeneration of bone tissue in the sheet-TPMS pore geometry is delayed; on the other hand, Diamond and Gyroid pore scaffolds show notable neo-bone tissue in the center pore regions during the early stages (3-5 weeks) and the bone tissue uniformly fills the whole porous network after 7 weeks. Collectively, the design methods in this study provide an important perspective for optimizing the pore architecture design of bioceramic scaffolds to accelerate the rate of osteogenesis and promote the clinical translation of bioceramic scaffolds in the repair of bone defects.