RESUMEN
Recent years have witnessed the development of droplet-based microfluidics as a useful and effective tool for high-throughput analysis in biological, chemical and environmental sciences. Despite the flourishing development of droplet manipulation techniques, only a few methods allow for label-free and quantitative inspection of flowing droplets in microchannels in real-time and in three dimensions (3-D). In this work, we propose and demonstrate the application of a real-time quantitative phase microscopy (RT-QPM) technique for 3-D visualization of droplets, and also for full-field and label-free measurement of analyte concentration distribution in the droplets. The phase imaging system consists of a linear-CCD-based holographic microscopy configuration and an optofluidic phase-shifting element, which can be used for retrieving quantitative phase maps of flowing objects in the microchannels with a temporal resolution only limited to the frame rate of the CCD camera. To demonstrate the capabilities of the proposed imaging technique, we have experimentally validated the 3-D image reconstruction of the droplets generated in squeezing and dripping regimes and quantitatively investigated the volumetric and morphological variation of droplets as well as droplet parameters related to the depth direction under different flow conditions. We also demonstrated the feasibility of using this technique, as a refractive index sensor, for in-line quantitative measurement of carbamide analyte concentration within the flowing droplets.
RESUMEN
Recently, the design of metamaterial guided by transformation optics (TO) has emerged as an effective method to hide objects from optical detection, based on arranging a bended light beam to detour. However, this TO-based solution involves fabrication of material with complicated distribution of permittivity and permeability, and the device falls short of tunability after fabrication. In this work, we propose an optofluidic model employing the method of streamline tracing-based transformation optofluidics (STTOF) to hydrodynamically reconfigure light propagation in a given flow field for object-cloaking purposes. The proof-of-concept is demonstrated and tested on an optofluidic chip to validate our proposed theory. Experimental results show that our proposed STTOF method can be used to successfully detour the light path from the object under cloaking in a mathematically pre-defined manner.