RESUMEN
In this work, a series of magnetic chitosan (CS) supported-metal catalysts were successfully prepared for the acetalization of benzaldehyde (BzH) with ethylene glycol (EG). The structural properties of the catalysts were characterized by TEM, FT-IR, XRD, XPS, TGA-DTG, SEM-EDX and VSM. The results showed that Fe3O4-CS-Cu(20 %) catalyst possessed the best catalytic efficiency in all prepared catalysts due to its suitable acidity and excellent stability when they were utilized in the acetalization reaction to generate benzaldehyde glycol acetal. The response surface methodology based on Box-Behnken design was applied to optimize acetalization reaction conditions with the optimal yield of 96.26 % obtained via 3D surface diagram. The attractive feature of prepared catalysts was easy separation from solutions via an external magnetic field application. This work sheds light on the design of novel chitosan-supported metal catalysts which could be widely applied in acetalization industry.
RESUMEN
A series of transition metal (M)-promoted carbon-silicon (C-M-Si; M=Mn, Fe, Co, Ni, Cu, Zn, Zr) solid acid catalysts with designated molar ratio of M/Si=1 : 8 were fabricated and exploited for acetalization of benzaldehyde (BzH) with ethylene glycol (EG). The physical and chemical properties of these C-M-Si catalysts prepared by sol-gel method were characterized by various techniques, namely, SEM, EDS, TGA-DTG, BET, XRD, FTIR, XPS, and NH3 -TPD. Among various examined acidic C-M-Si catalysts, the C-Fe-Si catalyst exhibited the optimal catalytic activity with the benzaldehyde glycol acetal (BEGA) yield of 97.67 %, in excellent agreement with the value (97.88 %) predicted by the response surface methodology (RSM) based on a Box-Behnken design (BBD). C-Fe-Si catalyst with the high catalytic activities and excellent stability and reusability may be ascribed to the suitable acidity and uniform surface distribution of active sites requisite for the acid-catalyzed acetalization reaction.
RESUMEN
BACKGROUND: As potent antioxidants, anthocyanins can protect the body from free radicals. However, the traditional solvent extraction method has the disadvantages of requiring a high extraction temperature and long extraction time, so it is necessary to develop an efficient extraction method for anthocyanins. RESULTS: In this study, the technique of natural deep eutectic solvents (DESs) was applied to extract anthocyanins from purple perilla leaves with the aid of microwave-ultrasonic assisted extraction (MUAE). The response surface methodology (RSM), based on the Box-Behnken design (BBD), predicted the maximum extraction yield of anthocyanins to be 619.62 mg (100 g)-1 under the following conditions: x1 (ultrasonic extraction power) = 357.25 W, x2 (time) = 25.62 min, and x3 (temperature) = 57.80 °C. The biological activity of the extract obtained was evaluated by examining its radical-scavenging effect on 1,1-diphenyl-2-picrylhydrazyl, hydroxyl radical, and superoxide anion radicals. Its bacteriostatic impact was investigated on four typical bacteria: Shewanella putrefaciens (S. putrefaciens), Pseudomonas fluorescens (P. fluorescens), Escherichia coli (E. coli), and Staphylococcus aureus (S. aureus). CONCLUSION: The integrated extraction method of DESs with MUAE was efficient, energy-saving, green, and sustainable. © 2022 Society of Chemical Industry.