A Novel Flame-Retardant, Smoke-Suppressing, and Superhydrophobic Transparent Bamboo.

Silica glass, known for its brittleness, weight, and non-biodegradable nature, faces challenges in finding suitable alternatives. Transparent wood, made by infusing polymers into wood, shows promise but is hindered by limited availability of wood in China and fire risks associated with its use. This study explores the potential of utilizing bamboo, which has a shorter growth cycle, as a valuable resource for developing flame-retardant, smoke-suppressing, and superhydrophobic transparent bamboo. A 3-layered flame-retardant barrier, composed of a top silane layer, an intermediate layer of SiO2 formed through hydrolysis-condensation of Na2SiO3 on the surface, and an inner layer of Na2SiO3, has been confirmed to be effective in reducing heat release, slowing flame spread, and inhibiting the release of combustible volatiles, toxic smoke, and CO. Compared to natural bamboo and other congeneric transparent products, the transparent bamboo displays remarkable superiority, with the majority of parameters being notably lower by an entire order of magnitude. It achieves a long ignition time of 116 s, low total heat release (0.7 MJ/m2), low total smoke production (0.063 m2), and low peak CO concentration (0.008 kg/kg). Moreover, when used as a substrate for perovskite solar cells, the transparent bamboo displays the potential to act as a light management layer, leading to a marked efficiency enhancement of 15.29%. The excellent features of transparent bamboo make it an enticing choice for future advancements in flame-retardant glasses and optical devices.

3D bioprinting technology to construct bone reconstruction research model and its feasibility evaluation.

Objective: To explore and construct a 3D bone remodeling research model displaying stability, repeatability, and precise simulation of the physiological and biochemical environment in vivo. Methods: In this study, 3D bioprinting was used to construct a bone reconstruction model. Sodium alginate (SA), hydroxyapatite (HA) and gelatin (Gel) were mixed into hydrogel as scaffold material. The osteoblast precursor cells MC3T3-E1 and osteoclast precursor cells RAW264.7 were used as seed cells, which may or may not be separated by polycarbonate membrane. The cytokines osteoprotegerin (OPG) and receptor activator of NF-κB ligand (RANKL) were used to induce cell differentiation. The function of scaffolds in the process of bone remodeling was analyzed by detecting the related markers of osteoblasts (alkaline phosphatase, ALP) and osteoclasts (tartrate resistant acid phosphatase, TRAP). Results: The scaffold showed good biocompatibility and low toxicity. The surface morphology aided cell adhesion and growth. The scaffold had optimum degradability, water absorption capacity and porosity, which are in line with the conditions of biological experiments. The effect of induced differentiation of cells was the best when cultured alone. After direct contact between the two types of cells at 2D or 3D level, the induced differentiation of cells was inhibited to varying degrees, although they still showed osteogenesis and osteoclast. After the cells were induced by indirect contact culture, the effect of induced differentiation improved when compared with direct contact culture, although it was still not as good as that of single culture. On the whole, the effect of inducing differentiation at 3D level was the same as that at 2D level, and its relative gene expression and enzyme activity were higher than that in the control group. Hence the scaffold used in this study could induce osteogenesis as well as osteoclast, thereby rendering it more effective in inducing new bone formation. Conclusion: This method can be used to construct the model of 3D bone remodeling mechanism.

OGT-induced O-GlcNAcylation of NEK7 protein aggravates osteoarthritis progression by enhancing NEK7/NLRP3 axis.

BACKGROUNDS: The role of O-GlcNAc transferase (OGT)-induced O-linked N-acetylglucosaminylation (O-GlcNAcylation) has been reported in multiple human diseases. However, its specific functions in osteoarthritis (OA) progression remain undetermined. OBJECTIVE: This study focused on the target proteins of OGT-induced O-GlcNAcylation in OA and the specific functional mechanism. METHODS: The levels of total O-GlcNAc and OGT were measured in both in vitro and in vivo OA models using western blot. The effects of OGT knockout on OA progression were detected through Safranin O staining, immunohistochemical staining and OARSI score evaluation. The effects of OGT silencing on LPS-induced chondrocyte injury were assessed by performing loss-of function assays. Co-immunoprecipitation (co-IP) was conducted to verify the effect of OGT-induced O-GlcNAcylation on the interaction between NEK7 and NLRP3. The role of OGT in modulating the O-GlcNAcylation and phosphorylation levels of NEK7 was analysed using western blot. RESULTS: The OGT-indued O-GlcNAcylation level was increased in both in vitro and in vivo OA models. Knockout of OGT mitigated OA progression in model mice. Additionally, silencing of OGT suppressed LPS-induced chondrocyte pyroptosis. Moreover, silencing of OGT inhibited the O-GlcNAcylation and enhanced the phosphorylation of NEK7 at S260 site, thereby blocking the binding of NEK7 with NLRP3. CONCLUSION: OGT-induced NEK7 O-GlcNAcylation promotes OA progression by promoting chondrocyte pyroptosis via the suppressing interaction between NEK7 and NLRP3.

Pseudomonas aeruginosa outer membrane vesicle-packed sRNAs can enter host cells and regulate innate immune responses.

Bacterial outer membrane vesicles (OMVs) can package and deliver virulence factors into host cells, which is an important mechanism mediating host-pathogen interactions. It has been reported that small RNAs (sRNAs) can be packed into OMVs with varying relative abundance, which might affect the function and/or stability of host mRNAs. In this study, we used OptiPrep density gradient ultra-high-speed centrifugation to purify OMVs from Pseudomonas aeruginosa. Next, the sequences and abundance of sRNAs were detected by using Small RNA-Seq. In particular, sRNA4518698, sRNA2316613 and sRNA809738 were the three most abundant sRNAs in OMVs, which are all fragments of P. aeruginosa non-coding RNAs. sRNAs were shielded within the interior of OMVs and remained resistant to external RNase cleavage. The miRanda and RNAhybrid analysis demonstrated that those sRNAs could target a large number of host mRNAs, which were enriched in host immune responses by the functions of GO and KEGG enrichment. Experimentally, we demonstrated that the transfection of synthetic sRNA4518698, sRNA2316613, or sRNA809738 could reduce the expression of innate immune response genes in RAW264.7 cells. Together, we demonstrated that P. aeruginosa OMVs sRNAs can regulate innate immune responses. This study uncovered a mechanism in which the OMVs regulate host responses by transferring bacterial sRNAs.

Soybean inclusion reduces soil organic matter mineralization despite increasing its temperature sensitivity.

Legume-based cropping increased the diversity of residues and rhizodeposition input into the soil, thus affecting soil organic matter (SOM) stabilization. Despite this, a comprehensive understanding of the mechanisms governing SOM mineralization and its temperature sensitivity across bulk soil and aggregate scales concerning legume inclusion remains incomplete. Here, a 6-year field experiment was conducted to investigate the effects of three cropping systems (i.e., winter wheat/summer maize, winter wheat/summer maize-soybean, and nature fallow) on SOM mineralization, its temperature sensitivity, and the main drivers in both topsoil (0-20 cm) and subsoil (20-40 cm). Soybean inclusion decreased the SOM mineralization by 17%-24%, while concurrently increasing the majority of soil biochemical properties, such as carbon (C) acquisition enzyme activities (5%-22%) and microbial biomass C (5%-9%), within the topsoil regardless of temperature. This is attributed to the increased substrate availability (e.g., dissolved organic C) facilitating microbial utilization, thus devoting less energy to mining nutrients under diversified cropping. In addition, SOM mineralization was lower within macroaggregates (∼12%), largely driven by substrate availability irrespective of aggregate sizes. In contrast, diversified cropping amplified the Q10 of SOM mineralization in mesoaggregates (+6%) and microaggregates (+5%) rather than in macroaggregates. This underscores the pivotal role of mesoaggregates and microaggregates in dominating the Q10 of SOM mineralization under soybean-based cropping. In conclusion, legume-based cropping diminishes soil organic matter mineralization despite increasing its temperature sensitivity, which proposes a potential strategy for C-neutral agriculture and climate warming mitigation.

Synergistically enhancing the selective adsorption of cationic dyes through copper impregnation and amino functionality into iron-based metal-organic frameworks.

Dyes contaminating the sewages have seriously threatened the living beings and their separation from wastewater in terms of potential resource recovery is of high value. Herein, both of metal node doping and ligand group grafting were taken into account to enhance the adsorption selectivity of Fe-MOFs towards cationic dyes. The positive correlation between copper doping amount and selective coefficient (∂MOMB) for methylene blue (MB) over methyl orange (MO) within a certain range was mainly attributed to the increased surface negative charges via partial replacement of Fe(III) with Cu(II). Moreover, the amount of surface negative charges was further increased after amino functionalization and there was a synergism between Cu(II) and -NH2 in selectivity enhancement. As a result, Fe0.6Cu0.4-BDC-NH2 exhibited a 22.5-times increase in ∂MOMB and other cationic dyes including malachite green (MG) and rhodamine B (Rh. B) could also be selectively separated from binary and quaternary mixed dye systems. Moreover, Fe0.6Cu0.4-BDC-NH2 showed many superiorities like a wide pH range of 4.0-8.0, strong anti-interference ability over various inorganic ions, good recyclability, and stability. The adsorption kinetics and isotherm suggested that the MB adsorption process was a homogeneous single-layer chemisorption. Additionally, the thermodynamics manifested that the overall process was exothermic and spontaneous. According to the FT-IR and XPS spectra analysis, the electrostatic interaction and hydrogen bonding were determined as the main driving forces, and π-π interaction also contributed to the adsorption process.

Short-term continuous monocropping reduces peanut yield mainly via altering soil enzyme activity and fungal community.

Continuous monocropping can lead to soil sickness and increase of soil-borne disease, which finally reduces crop yield. Microorganisms benefit plants by increasing nutrient availability, participating in auxin synthesis, and defending against pathogens. However, little is known about the influence of short-term successive peanuts cropping on soil properties, enzyme activities, its yield, plant-associated microbes, and their potential correlations in peanut production. Here, we examined the community structure, composition, network structure and function of microbes in the rhizosphere and bulk soils under different monocropping years. Moreover, we assessed the impact of changes in the soil micro-environment and associated soil microbes on peanut yield. Our results showed that increase of monocropping year significantly decreased most soil properties, enzyme activities and peanut yield (p < 0.05). Principal co-ordinates analysis (PCoA) and analysis of similarities (ANOSIM) indicated that monocropping year significantly influenced the fungal community structure in the rhizosphere and bulk soils (p < 0.01), while had no effect on the bacterial community. With the increase of continuous monocropping year, peanut selectively decreased (e.g., Candidatus_Entotheonella, Bacillus and Bryobacter) or increased (e.g., Nitrospira, Nocardioides, Ensifer, Gaiella, and Novosphingobium) the abundance of some beneficial bacterial genera in the rhizosphere. Continuous monocropping significantly increased the abundance of plant pathogens (e.g., Plectosphaerella, Colletotrichum, Lectera, Gibberella, Metarhizium, and Microdochium) in the rhizosphere and negatively affected the balance of fungal community. Besides, these species were correlated negatively with L-leucine aminopeptidase (LAP) activity. Network co-occurrence analysis showed that continuous monocropping simplified the interaction network of bacteria and fungi. Random forest and partial least squares path modeling (PLS-PM) analysis further showed that fungal community, pathogen abundance, soil pH, and LAP activity negatively affected peanut yield. In conclusion, short-term continuous monocropping decreased LAP activity and increased potential fungal pathogens abundance, leading to reduction of peanut yield.

Decoupling livestock and poultry pollution emissions from industrial development: A step towards reducing environmental emissions.

China has implemented policies like Leading areas for Agricultural Green Development (LAGD) to mitigate livestock and poultry farming pollution while promoting industry growth. However, it remains uncertain whether LAGDs have successfully balanced emission reduction with stable development. This study examines 165 LAGDs to analyze changes in emissions, assess the decoupling of emission reduction from output value, and identify influencing factors. Findings reveal that emissions from livestock and poultry in LAGDs initially increased and then decreased between 2010 and 2019. Cattle were responsible for over 40% of fecal emissions, and pigs for more than 20%. Additionally, pigs contributed to over 61% of urine emissions. From 2010 to 2014, increases in chemical oxygen demand were mainly due to pigs and cattle. Total nitrogen levels were significantly impacted by cattle, while pigs were affected by total phosphorus. From 2014 to 2019, reductions in emissions were largely attributed to a decrease in pig-related pollutants. The decoupling status shifted from strong to weak and then back to strong between 2014 and 2019. Production efficiency played a crucial role in reducing emissions, while changes in industrial structure moved from supporting to hindering this reduction. Economic development was a primary factor in driving these changes. Standard emissions in Chinese regions showed a rising and then declining trend from 2010 to 2019. The Northeast and Northwest regions of China demonstrated emission trends that were in sync with the growth in rural income. This study offers insights into the successes and challenges of LAGDs in achieving a balance between reduced emissions and development, using quantitative analysis. The findings are instrumental in informing policies for a sustainable livestock and poultry industry. Recommendations include evaluating coordinated approaches to pollution reduction and industrial growth, setting decoupling goals, designing policies based on influential factors, conducting regional assessments of livestock and poultry demand, and implementing region-specific strategies.

[Prognosis analysis of multi-indicator combined with sequential organ failure assessment in patients with sepsis].

OBJECTIVE: To explore the prognostic value of early multiple detection indicators in combination with sequential organ failure assessment (SOFA) in sepsis patients. METHODS: A retrospective analysis was conducted. Patients with sepsis admitted to the department of critical care medicine of Huanggang Central Hospital of Yangtze University from May 2020 to May 2022 were selected as the research subjects. Coagulation indicators, inflammatory factors, blood routine, liver and kidney function, and blood gas analysis were collected at admission. Organ dysfunction was assessed based on the SOFA score within 24 hours after admission. Patients were divided into a survival group and a death group according to the outcome of 28 days in ICU. Differences in the above indicators between the two groups were compared. Multifactorial Logistic regression analysis was used to analyze prognostic factors of 28-day mortality in sepsis patients. Receiver operator characteristic curve (ROC curve) was drawn to analyze the predictive performance of various indicators, the SOFA score, and the combine model for the 28-day outcome in patients with sepsis. RESULTS: A total of 101 patients with sepsis were enrolled, 56 patients survived and 45 patients died. Compared to the survival group, patients in the death group were older, the proportion of patients with septic shock was larger, the SOFA score, and the proportion of pulmonary infection were higher, the prothrombin time (PT) and activated partial thromboplastin time (APTT) were significantly prolonged, the prothrombin activity (PTA) was significantly shortened, and antithrombin (AT) was significantly decreased, the levels of hypersensitivity C-reactive protein (hs-CRP), blood urea nitrogen (BUN), total bilirubin (TBil), and lactic acid (Lac) were significantly increased, while the platelet count (PLT) was significantly decreased. Multifactorial Logistic regression analysis showed that pulmonary infection [odds ratio (OR) = 0.010, 95% confidence interval (95%CI) was 0.001-0.164, P = 0.001], AT (OR = 0.944, 95%CI was 0.910-0.978, P = 0.002), hs-CRP (OR = 1.008, 95%CI was 1.001-1.015, P = 0.017), Lac (OR = 1.619, 95%CI was 1.195-2.193, P = 0.002), and SOFA score (OR = 1.363, 95%CI was 1.076-1.727, P = 0.010) were independent prognostic factors for 28-day mortality in patients. A combined model was constructed using pulmonary infection, AT, hs-CRP, Lac, and SOFA score. ROC curve analysis showed that the area under the ROC curve (AUC) for the combine model in predicting sepsis prognosis was 0.936 (95%CI was 0.869-0.975, P < 0.001), which was higher in value compared to single indicators (AUC of AT, hs-CRP, Lac, and SOFA score were 0.775, 0.666, 0.802, 0.796, respectively, all P < 0.05). CONCLUSIONS: The predictive ability of the SOFA score for sepsis patient outcomes is limited. The combine model combining infection site, AT, hs-CRP, and Lac shows better predictive ability.

Discovery, Optimization, and Evaluation of Novel N-(Benzimidazol-5-yl)-1,3,4-thiadiazol-2-amine Analogues as Potent STAT3 Inhibitors for Cancer Treatment.

Signal transducer and activator of transcription 3 (STAT3) is an attractive target for cancer therapy. However, identifying potent and selective STAT3 small-molecule inhibitors with drug-like properties remains challenging. Based on a scaffold combination strategy, compounds with a novel N-(benzimidazol-5-yl)-1,3,4-thiadiazol-2-amine scaffold were designed and their inhibition of the interleukin-6 (IL-6)/JAK/STAT3 pathway was tested in HEK-Blue IL-6 reporter cells. After optimization of lead compound 12, compound 40 was identified as a selective STAT3 inhibitor that directly binds the SH2 domain to inhibit STAT3 phosphorylation, translocation, and downstream gene transcription. Compound 40 exhibited antiproliferative activities against STAT3-overactivated DU145 (IC50 value = 2.97 µM) and MDA-MB-231 (IC50 value = 3.26 µM) cancer cells and induced cell cycle arrest and apoptosis. In the DU145 xenograft model, compound 40 showed in vivo antitumor efficacy following intraperitoneal administration, with a tumor growth inhibition rate of 65.3% at 50 mg/kg, indicating promise for further development.

Research on the anti-ageing mechanism of Prunella vulgaris L.

Prunella vulgaris L. (P. vulgaris) has long been considered to have antipyretic, analgesic and anti-inflammatory effects, lowering blood lipids and pressure. Many studies show that in addition to the traditional telomere attrition, DNA damage and epigenetic changes, immunosenescence is also a new possibility to explore the mechanism of ageing. Therefore, this herb may have potential anti-ageing effects. Typically, there are a series of markers that identify senescent cells, such as superoxide dismutase (SOD)2, an inhibitor of CDK4 (p16INK4A), tumor necrosis factor (TNF)-α, immune cells number, proliferation, and nuclear abnormalities. These changes rarely present in young tissues, while greatly increasing in response to ageing. Firstly, the ageing model of the Institute of Cancer Research (ICR) mouse was established by D-galactose subcutaneous injection. Then, SOD2, p16INK4A and TNF-α were detected by quantitative Real-time PCR (qPCR), Western Blot (WB) and Enzyme-Linked Immunosorbent Assay (ELISA). Simultaneously, senescent cells in livers were stained by hematoxylin and eosin (HE). The viability of splenocytes was detected by Cell Counting Kit-8(CCK-8). The difference in specific immune cells (NK cells, B lymphocytes and T lymphocytes) was detected by flow cytometry. Both low (100 mg/kg) and high (300 mg/kg) concentrations of P. vulgaris treated ageing ICR mice show anti-ageing alterations, such as p16INK4A decreased approximately 1/2 and SOD2 tripled in livers, TNF-α decreased from 1 to 0.6 in plasma, and T cells increased from 0.09 to 0.19%. Compared with the ageing group, the spleen cells in the Prunella-treated group had stronger proliferation ability. Thus, P. vulgaris could have an anti-ageing effect. This is the first study to demonstrate the anti-ageing effect of P. vulgaris. It may also be capable of preventing a variety of age-related diseases.

Peanut-based Rotation Stabilized Diazotrophic Communities and Increased Subsequent Wheat Yield.

The introduction of legumes into rotations can improve nitrogen use efficiency and crop yield; however, its microbial mechanism involved remains unclear. This study aimed to explore the temporal impact of peanut introduction on microorganisms related to nitrogen metabolism in rotation systems. In this study, the dynamics of diazotrophic communities in two crop seasons and wheat yields of two rotation systems: winter wheat - summer maize (WM) and spring peanut → winter wheat - summer maize (PWM) in the North China Plain were investigated. Our results showed that peanut introduction increased wheat yield and biomass by 11.6% (p < 0.05) and 8.9%, respectively. Lower Chao1 and Shannon indexes of the diazotrophic communities were detected in soils that sampling in June compared with those sampling in September, although no difference was found between WM and PWM. Principal co-ordinates analysis (PCoA) showed that rotation system significantly changed the diazotrophic community structures (PERMANOVA; p < 0.05). Compared with WM, the genera of Azotobacter, Skermanella, Azohydromonas, Rhodomicrobium, Azospirillum, Unclassified_f_Opitutaceae, and Unclassified_f_Rhodospirillaceae were significantly enriched (p < 0.05) in PWM. Furthermore, rotation system and sampling time significantly influenced soil properties, which significantly correlated with the top 15 genera in relative abundance. Partial least squares path modeling (PLS-PM) analysis further showed that the diazotrophic community diversity (alpha- and beta-diversity) and soil properties (pH, SOC and TN) significantly affected wheat yield. In conclusion, legume inclusion has the potential to stabilize diazotrophic community structure at the temporal scales and increase subsequent crop yield.

Feasibility of repairing skin defects by VEGF165 gene-modified iPS-HFSCs seeded on a 3D printed scaffold containing astragalus polysaccharide.

The preparation of biodegradable scaffolds loaded with cells and cytokine is a feature of tissue-engineered skin. IPSCs-based tissue-engineered skin treatment for wound repair is worth exploring. Healthy human skin fibroblasts were collected and reprogrammed into iPSCs. After gene modification and induction, CK19+ /Integrinß1+ /CD200+ VEGF165 gene-modified iPS-HFSCsGFP were obtained and identified by a combination of immunofluorescence and RT-qPCR. Astragalus polysaccharide-containing 3D printed degradable scaffolds were prepared and co-cultured with VEGF165 gene-modified iPS-HFSCsGFP , and the biocompatibility and spatial structure of the tissue-engineered skin was analysed by cell counting kit-8 (CCK8) assay and scanning electron microscopy. Finally, the tissue-engineered skin was transplanted onto the dorsal trauma of nude mice, and the effect of tissue-engineered skin on the regenerative repair of total skin defects was evaluated by a combination of histology, immunohistochemistry, immunofluorescence, RT-qPCR, and in vivo three-dimensional reconstruction under two-photon microscopy. CK19+ /Integrinß1+ /CD200+ VEGF165 gene-modified iPS-HFSCsGFP , close to the morphology and phenotype of human-derived hair follicle stem cells, were obtained. The surface of the prepared 3D printed degradable scaffold containing 200 µg/mL astragalus polysaccharide was enriched with honeycomb-like meshwork, which was more conducive to the proliferation of the resulting cells. After tissue-engineered skin transplantation, combined assays showed that it promoted early vascularization, collagen and hair follicle regeneration and accelerated wound repair. VEGF165 gene-modified iPS-HFSCsGFP compounded with 3D printed degradable scaffolds containing 200 µg/mL astragalus polysaccharide can directly and indirectly participate in vascular, collagen, and hair follicle regeneration in the skin, achieving more complete structural and functional skin regenerative repair.

A pipeline for sample tagging of whole genome bisulfite sequencing data using genotypes of whole genome sequencing.

BACKGROUND: In large-scale high-throughput sequencing projects and biobank construction, sample tagging is essential to prevent sample mix-ups. Despite the availability of fingerprint panels for DNA data, little research has been conducted on sample tagging of whole genome bisulfite sequencing (WGBS) data. This study aims to construct a pipeline and identify applicable fingerprint panels to address this problem. RESULTS: Using autosome-wide A/T polymorphic single nucleotide variants (SNVs) obtained from whole genome sequencing (WGS) and WGBS of individuals from the Third China National Stroke Registry, we designed a fingerprint panel and constructed an optimized pipeline for tagging WGBS data. This pipeline used Bis-SNP to call genotypes from the WGBS data, and optimized genotype comparison by eliminating wildtype homozygous and missing genotypes, and retaining variants with identical genomic coordinates and reference/alternative alleles. WGS-based and WGBS-based genotypes called from identical or different samples were extensively compared using hap.py. In the first batch of 94 samples, the genotype consistency rates were between 71.01%-84.23% and 51.43%-60.50% for the matched and mismatched WGS and WGBS data using the autosome-wide A/T polymorphic SNV panel. This capability to tag WGBS data was validated among the second batch of 240 samples, with genotype consistency rates ranging from 70.61%-84.65% to 49.58%-61.42% for the matched and mismatched data, respectively. We also determined that the number of genetic variants required to correctly tag WGBS data was on the order of thousands through testing six fingerprint panels with different orders for the number of variants. Additionally, we affirmed this result with two self-designed panels of 1351 and 1278 SNVs, respectively. Furthermore, this study confirmed that using the number of genetic variants with identical coordinates and ref/alt alleles, or identical genotypes could not correctly tag WGBS data. CONCLUSION: This study proposed an optimized pipeline, applicable fingerprint panels, and a lower boundary for the number of fingerprint genetic variants needed for correct sample tagging of WGBS data, which are valuable for tagging WGBS data and integrating multi-omics data for biobanks.

Current and emerging applications of saccharide-modified chitosan: a critical review.

Chitin, as the main component of the exoskeleton of Arthropoda, is a highly available natural polymer that can be processed into various value-added products. Its most important derivative, i.e., chitosan, comprising ß-1,4-linked 2-amino-2-deoxy-ß-d-glucose (deacetylated d-glucosamine) and N-acetyl-d-glucosamine units, can be prepared via alkaline deacetylation process. Chitosan has been used as a biodegradable, biocompatible, non-antigenic, and nontoxic polymer in some in-vitro applications, but the recently found potentials of chitosan for in-vivo applications based on its biological activities, especially antimicrobial, antioxidant, and anticancer activities, have upgraded the chitosan roles in biomaterials. Chitosan approval, generally recognized as a safe compound by the United States Food and Drug Administration, has attracted much attention toward its possible applications in diverse fields, especially biomedicine and agriculture. Despite some favorable characteristics, the chitosan's structure should be customized for advanced applications, especially due to its drawbacks, such as low drug-load capacity, low solubility, high viscosity, lack of elastic properties, and pH sensitivity. In this context, derivatization with relatively inexpensive and highly available mono- and di-saccharides to soluble branched chitosan has been considered a "game changer". This review critically scrutinizes the emerging technologies based on the synthesis and application of lactose- and galactose-modified chitosan as two important chitosan derivatives. Some characteristics of chitosan derivatives and biological activities have been detailed first to understand the value of these natural polymers. Second, the saccharide modification of chitosan has been discussed briefly. Finally, the applications of lactose- and galactose-modified chitosan have been scrutinized and compared to native chitosan to provide an insight into the current state-of-the research for stimulating new ideas with the potential of filling research gaps.

Ozonation-pelleting of nitrogen-enriched wheat straw: Towards improved pellet properties, enhanced digestibility, and reduced methane emissions.

The livestock industry needs to use crop straws that are highly digestible to improve feed productivity and reduce ruminal methane emissions. Hence, this study aimed to use the ozonation and pelleting processes to enhance the digestibility and reduce the ruminal methane emissions of wheat straw enriched with two nitrogen sources (i.e., urea and heat-processed broiler litter). Various analyses were conducted on the pellets, including digestibility indicators, mechanical properties, surface chemistry functionalization, chemical-spectral-structural features, and energy requirements. For comparison, loose forms of the samples were also analyzed. The nitrogen-enriched ozonated wheat straw pellets had 43.06 % lower lignin, 28.30 % higher gas production for 24 h, 12.28 % higher metabolizable energy, 13.78 % higher in vitro organic matter digestibility for 24 h, and 28.81 % higher short-chain fatty acid content than the nitrogen-enriched loose sample. The reduction of methane emissions by rumen microorganisms of nitrogen-enriched wheat straw by ozonation, pelleting, and ozonation-pelleting totaled 89.15 %, 23.35 %, and 66.98 %, respectively. The ozonation process resulted in a 64 % increase in the particle density, a 5.5-time increase in the tensile strength, and a 75 % increase in the crushing energy of nitrogen-enriched wheat straw. In addition, ozone treatment could also reduce the specific and thermal energy consumption required in the pelleting process by 15.10 % and 7.61 %, respectively.

Potential application of polysaccharide mucilages as a substitute for emulsifiers: A review.

Mucilages are natural compounds consisting mainly of polysaccharides with complex chemical structures. Mucilages also contain uronic acids, proteins, lipids, and bioactive compounds. Because of their unique properties, mucilages are used in various industries, including food, cosmetics, and pharmaceuticals. Typically, commercial gums are composed only of polysaccharides, which increase their hydrophilicity and surface tension, reducing their emulsifying ability. As a result of the presence of proteins in combination with polysaccharides, mucilages possess unique emulsifying properties due to their ability to reduce surface tension. In recent years, various studies have been conducted on using mucilages as emulsifiers in classical and Pickering emulsions because of their unique emulsifying feature. Studies have shown that some mucilages, such as yellow mustard, mutamba, and flaxseed mucilages, have a higher emulsifying capacity than commercial gums. A synergistic effect has also been shown in some mucilages, such as Dioscorea opposita mucilage when combined with commercial gums. This review article investigates whether mucilages can be used as emulsifiers and what factors affect their emulsifying properties. A discussion of the challenges and prospects of using mucilages as emulsifiers is also presented in this review.

Plant growth stages covered the legacy effect of rotation systems on microbial community structure and function in wheat rhizosphere.

Legume-based crop rotation is conducive to improve soil multifunctionality, but how the legacy effect of previous legumes influenced the rhizosphere  microbial community of the following crops along with growth stages remains unclear. Here, the wheat rhizosphere microbial community was assessed at the regreening and filling stages with four previous legumes (mungbean, adzuki bean, soybean, and peanut), as well as cereal maize as a control. The composition and structure of both bacterial and fungal communities varied dramatically between two growth stages. The differences in fungal community structure among rotation systems were observed at both the regreening and filling stages, while the difference in bacterial community structure among rotation systems was observed only at the filling stage. The complexity and centrality of the microbial network decreased along with crop growth stages. The species associations were strengthened in legume-based rotation systems than in cereal-based rotation system at the filling stage. The abundance of KEGG orthologs (KOs) associated with carbon, nitrogen, phosphorus, and sulfur metabolism of bacterial community decreased from the regreening stage to the filling stage. However, there was no difference in the abundance of KOs among rotation systems. Together, our results showed that plant growth stages had a stronger impact than the legacy effect of rotation systems in shaping the wheat rhizosphere microbial community, and the differences among rotation systems were more obvious at the late growth stage. Such compositional, structural, and functional changes may provide predictable consequences of crop growth and soil nutrient cycling.

Recent developments in improving the emulsifying properties of chitosan.

Chitosan is one of the valuable products obtained from crustacean waste. The unique characteristics of chitosan (antimicrobial, antioxidant, anticancer, and anti-inflammatory) have increased its application in various sectors. Besides unique biological properties, chitosan or chitosan-based compounds can stabilize emulsions. Nevertheless, studies have shown that chitosan cannot be used as an efficient stabilizer because of its high hydrophilicity. Hence, this review aims to provide an overview of recent studies dealing with improving the emulsifying properties of chitosan. In general, two different approaches have been reported to improve the emulsifying properties of chitosan. The first approach tries to improve the stabilization property of chitosan by modifying its structure. The second one uses compounds such as polysaccharides, proteins, surfactants, essential oils, and polyphenols with more wettability and emulsifying properties than chitosan's particles in combination with chitosan to create complex particles. The tendency to use chitosan-based particles to stabilize Pickering emulsions has recently increased. For this reason, more studies have been conducted in recent years to improve the stabilizing properties of chitosan-based particles, especially using the electrostatic interaction method. In the electrostatic interaction method, numerous research has been conducted on using proteins and polysaccharides to increase the stabilizing property of chitosan.