Multi-step ahead forecasting of electrical conductivity in rivers by using a hybrid Convolutional Neural Network-Long Short-Term Memory (CNN-LSTM) model enhanced by Boruta-XGBoost feature selection algorithm.

Electrical conductivity (EC) is widely recognized as one of the most essential water quality metrics for predicting salinity and mineralization. In the current research, the EC of two Australian rivers (Albert River and Barratta Creek) was forecasted for up to 10 days using a novel deep learning algorithm (Convolutional Neural Network combined with Long Short-Term Memory Model, CNN-LSTM). The Boruta-XGBoost feature selection method was used to determine the significant inputs (time series lagged data) to the model. To compare the performance of Boruta-XGB-CNN-LSTM models, three machine learning approaches-multi-layer perceptron neural network (MLP), K-nearest neighbour (KNN), and extreme gradient boosting (XGBoost) were used. Different statistical metrics, such as correlation coefficient (R), root mean square error (RMSE), and mean absolute percentage error, were used to assess the models' performance. From 10 years of data in both rivers, 7 years (2012-2018) were used as a training set, and 3 years (2019-2021) were used for testing the models. Application of the Boruta-XGB-CNN-LSTM model in forecasting one day ahead of EC showed that in both stations, Boruta-XGB-CNN-LSTM can forecast the EC parameter better than other machine learning models for the test dataset (R = 0.9429, RMSE = 45.6896, MAPE = 5.9749 for Albert River, and R = 0.9215, RMSE = 43.8315, MAPE = 7.6029 for Barratta Creek). Considering the better performance of the Boruta-XGB-CNN-LSTM model in both rivers, this model was used to forecast 3-10 days ahead of EC. The results showed that the Boruta-XGB-CNN-LSTM model is very capable of forecasting the EC for the next 10 days. The results showed that by increasing the forecasting horizon from 3 to 10 days, the performance of the Boruta-XGB-CNN-LSTM model slightly decreased. The results of this study show that the Boruta-XGB-CNN-LSTM model can be used as a good soft computing method for accurately predicting how the EC will change in rivers.

Microplastics in agroecosystems: Soil-plant dynamics and effective remediation approaches.

Increasing microplastic (MP) pollution, primarily from anthropogenic sources such as plastic film mulching, waste degradation, and agricultural practices, has emerged as a pressing global environmental concern. This review examines the direct and indirect effects of MPs on crops, both in isolation and in conjunction with other contaminants, to elucidate their combined toxicological impacts. Organic fertilizers predominantly contain 78.6% blue, 9.5% black, and 8.3% red MPs, while irrigation water in agroecosystems contains 66.2% white, 15.4% blue, and 8.1% black MPs, ranging from 0-1 mm to 4-5 mm in size. We elucidate five pivotal insights: Firstly, soil MPs exhibit affinity towards crop roots, seeds, and vascular systems, impeding water and nutrient uptake. Secondly, MPs induce oxidative stress in crops, disrupting vital metabolic processes. Thirdly, leachates from MPs elicit cytotoxic and genotoxic responses in crops. Fourthly, MPs disrupt soil biotic and abiotic dynamics, influencing water and nutrient availability for crops. Lastly, the cumulative effects of MPs and co-existing contaminants in agricultural soils detrimentally affect crop yield. Thus, we advocate agronomic interventions as practical remedies. These include biochar input, application of growth regulators, substitution of plastic mulch with crop residues, promotion of biological degradation, and encouragement of crop diversification. However, the efficacy of these measures varies based on MP type and dosage. As MP volumes increase, exploring alternative mitigation strategies such as bio-based plastics and environmentally friendly biotechnological solutions is imperative. Recognizing the persistence of plastics, policymakers should enact legislation favoring the mitigation and substitution of non-degradable materials with bio-derived or compostable alternatives. This review demonstrates the urgent need for collective efforts to alleviate MP pollution and emphasizes sustainable interventions for agricultural ecosystems.

Navigating the environmental dynamics, toxicity to aquatic organisms and human associated risks of an emerging tire wear contaminant 6PPD quinone.

N-1,3-Dimethylbutyl-N'-phenyl-p-quinone diamine (6PPDQ) is a derivative of 6PPD, a synthetic antioxidant used in tire manufacturing to control the degradation caused by oxidation and heat aging. Its discovery in 2020 has raised important environmental concern, particularly regarding its association with acute mortality in coho salmon, prompting surge in research on its occurrence, fate, and transport in aquatic ecosystems. Despite this attention, there remain notable gaps in grasping the knowledge, demanding an in depth overview. Thus, this review consolidates recent studies to offer a thorough investigation of 6PPDQ's environmental dynamics, pathways into aquatic ecosystems, toxicity to aquatic organisms, and human health implications. Various aquatic species exhibit differential susceptibility to 6PPDQ toxicity, manifesting in acute mortalities, disruption of metabolic pathways, oxidative stress, behavioral responses, and developmental abnormalities. Whereas, understanding the species-specific responses, molecular mechanisms, and broader ecological implications requires further investigation across disciplines such as ecotoxicology, molecular biology, and environmental chemistry. Integration of findings emphasizes the complexity of 6PPDQ toxicity and its potential risks to human health. However, urgent priorities should be given to the measures like long-term monitoring studies to evaluate the chronic effects on aquatic ecosystems and the establishment of standardized toxicity testing protocols to ensure the result comparability and reproducibility. This review serves as a vital resource for researchers, policymakers, and environmental professionals seeking appraisals into the impacts of 6PPDQ contamination on aquatic ecosystems and human health.

Suspended sediment load prediction using sparrow search algorithm-based support vector machine model.

Prediction of suspended sediment load (SSL) in streams is significant in hydrological modeling and water resources engineering. Development of a consistent and accurate sediment prediction model is highly necessary due to its difficulty and complexity in practice because sediment transportation is vastly non-linear and is governed by several variables like rainfall, strength of flow, and sediment supply. Artificial intelligence (AI) approaches have become prevalent in water resource engineering to solve multifaceted problems like sediment load modelling. The present work proposes a robust model incorporating support vector machine with a novel sparrow search algorithm (SVM-SSA) to compute SSL in Tilga, Jenapur, Jaraikela and Gomlai stations in Brahmani river basin, Odisha State, India. Five different scenarios are considered for model development. Performance assessment of developed model is analyzed on basis of mean absolute error (MAE), root mean squared error (RMSE), determination coefficient (R2), and Nash-Sutcliffe efficiency (ENS). The outcomes of SVM-SSA model are compared with three hybrid models, namely SVM-BOA (Butterfly optimization algorithm), SVM-GOA (Grasshopper optimization algorithm), SVM-BA (Bat algorithm), and benchmark SVM model. The findings revealed that SVM-SSA model successfully estimates SSL with high accuracy for scenario V with sediment (3-month lag) and discharge (current time-step and 3-month lag) as input than other alternatives with RMSE = 15.5287, MAE = 15.3926, and ENS = 0.96481. The conventional SVM model performed the worst in SSL prediction. Findings of this investigation tend to claim suitability of employed approach to model SSL in rivers precisely and reliably. The prediction model guarantees the precision of the forecasted outcomes while significantly decreasing the computing time expenditure, and the precision satisfies the demands of realistic engineering applications.

Decoding the molecular concerto: Toxicotranscriptomic evaluation of microplastic and nanoplastic impacts on aquatic organisms.

The pervasive and steadily increasing presence of microplastics/nanoplastics (MPs/NPs) in aquatic environments has raised significant concerns regarding their potential adverse effects on aquatic organisms and their integration into trophic dynamics. This emerging issue has garnered the attention of (eco)toxicologists, promoting the utilization of toxicotranscriptomics to unravel the responses of aquatic organisms not only to MPs/NPs but also to a wide spectrum of environmental pollutants. This review aims to systematically explore the broad repertoire of predicted molecular responses by aquatic organisms, providing valuable intuitions into complex interactions between plastic pollutants and aquatic biota. By synthesizing the latest literature, present analysis sheds light on transcriptomic signatures like gene expression, interconnected pathways and overall molecular mechanisms influenced by various plasticizers. Harmful effects of these contaminants on key genes/protein transcripts associated with crucial pathways lead to abnormal immune response, metabolic response, neural response, apoptosis and DNA damage, growth, development, reproductive abnormalities, detoxification, and oxidative stress in aquatic organisms. However, unique challenge lies in enhancing the fingerprint of MPs/NPs, presenting complicated enigma that requires decoding their specific impact at molecular levels. The exploration endeavors, not only to consolidate existing knowledge, but also to identify critical gaps in understanding, push forward the frontiers of knowledge about transcriptomic signatures of plastic contaminants. Moreover, this appraisal emphasizes the imperative to monitor and mitigate the contamination of commercially important aquatic species by MPs/NPs, highlighting the pivotal role that regulatory frameworks must play in protecting all aquatic ecosystems. This commitment aligns with the broader goal of ensuring the sustainability of aquatic resources and the resilience of ecosystems facing the growing threat of plastic pollutants.

Vertical variations and environmental heterogeneity drove the symphony of periphytic protozoan fauna in marine ecosystems.

Periphytic protozoa are esteemed icons of microbial fauna, renowned for their sensitivity and role as robust bioindicators, pivotal for assessing ecosystem stress and anthropogenic impacts on water quality. Despite their significance, research exploring the community dynamics of protozoan fauna across diverse water columns and depths in shallow waters has been notably lacking. This is the first study that examines the symphony of protozoan fauna in different water columns at varying depths (1, 2, 3.5 and 5 m), in South China Sea. Our findings reveal that vertical changes and environmental heterogeneity plays pivotal role in shaping the protozoan community structure, with distinct preferences observed in spirotrichea and phyllopharyngea classes at specific depths. Briefly, diversity metrics (i.e., both alpha and beta) showed significantly steady patterns at 2 m and 3.5 m depths as well as high homogeneity in most of the indices was observed. Co-associations between environmental parameters and protozoan communities demonstrated temperature, dissolved oxygen, salinity, and pH, are significant drivers discriminating species richness and evenness across all water columns. Noteworthy variations of the other environmental parameters such as SiO3-Si, PO4--P, and NO2--N at 1 m and NO3--N, and NH4+-N, at greater depths, signal the crucial role of nutrient dynamics in shaping the protozoan communities. Moreover, highly sensitive species like Anteholosticha pulchara, Apokeronopsis crassa, and Aspidisca steini in varying environmental conditions among vertical columns may serve as eco- indicators of water quality. Collectively, this study contributes a thorough comprehension of the fine-scale structure and dynamics of protozoan fauna within marine ecosystems, providing insightful perspectives for ecological and water quality assessment in ever-changing marine environments.

Removal of pharmaceutical compounds and toxicology study in wastewater using Malaysian fungal Ganoderma lucidum.

Elevated usage of pharmaceutical products leads to the accumulation of emerging contaminants in sewage. In the current work, Ganoderma lucidum (GL) was used to remove pharmaceutical compounds (PCs), proposed as a tertiary method in sewage treatment plants (STPs). The PCs consisted of a group of painkillers (ketoprofen, diclofenac, and dexamethasone), psychiatrists (carbamazepine, venlafaxine, and citalopram), beta-blockers (atenolol, metoprolol, and propranolol), and anti-hypertensives (losartan and valsartan). The performance of 800 mL of synthetic water, effluent STP, and hospital wastewater (HWW) was evaluated. Parameters, including treatment time, inoculum volume, and mechanical agitation speed, have been tested. The toxicity of the GL after treatment is being studied based on exposure levels to zebrafish embryos (ZFET) and the morphology of the GL has been observed via Field Emission Scanning Electron Microscopy (FESEM). The findings conclude that GL can reduce PCs from <10% to >90%. Diclofenac and valsartan are the highest (>90%) in the synthetic model, while citalopram and propranolol (>80%) are in the real wastewater. GL effectively removed pollutants in 48 h, 1% of the inoculum volume, and 50 rpm. The ZFET showed GL is non-toxic (LC50 is 209.95 mg/mL). In the morphology observation, pellets GL do not show major differences after treatment, showing potential to be used for a longer treatment time and to be re-useable in the system. GL offers advantages to removing PCs in water due to their non-specific extracellular enzymes that allow for the biodegradation of PCs and indicates a good potential in real-world applications as a favourable alternative treatment.

Observed and future shifts in climate zone of Borneo based on CMIP6 models.

Climate change has significantly altered the characteristics of climate zones, posing considerable challenges to ecosystems and biodiversity, particularly in Borneo, known for its high species density per unit area. This study aimed to classify the region into homogeneous climate groups based on long-term average behavior. The most effective parameters from the high-resolution daily gridded Princeton climate datasets spanning 65 years (1950-2014) were utilized, including rainfall, relative humidity (RH), temperatures (Tavg, Tmin, Tmax, and diurnal temperature range (DTR)), along with elevation data at 0.25° resolution. The FCM clustering method outperformed K-Mean and two Ward's hierarchical methods (WardD and WardD2) in classifying Borneo's climate zones based on multi-criteria assessment, exhibiting the lowest average distance (2.172-2.180) and the highest compromise programming index (CPI)-based correlation ranking among cluster averages across all climate parameters. Borneo's climate zones were categorized into four: 'Wet and cold' (WC) and 'Wet' (W) representing wetter zones, and 'Wet and hot' (WH) and 'Dry and hot' (DH) representing hotter zones, each with clearly defined boundaries. For future projection, EC-Earth3-Veg ranked first for all climate parameters across 961 grid points, emerging as the top-performing model. The linear scaling (LS) bias-corrected EC-Earth3-Veg model, as shown in the Taylor diagram, closely replicated the observed datasets, facilitating future climate zone reclassification. Improved performance across parameters was evident based on MAE (35.8-94.6%), MSE (57.0-99.5%), NRMSE (42.7-92.1%), PBIAS (100-108%), MD (23.0-85.3%), KGE (21.1-78.1%), and VE (5.1-9.1%), with closer replication of empirical probability distribution function (PDF) curves during the validation period. In the future, Borneo's climate zones will shift notably, with WC elongating southward along the mountainous spine, W forming an enclave over the north-central mountains, WH shifting northward and shrinking inland, and DH expanding northward along the western coast. Under SSP5-8.5, WC is expected to expand by 39% and 11% for the mid- and far-future periods, respectively, while W is set to shrink by 46%. WH is projected to expand by 2% and 8% for the mid- and far-future periods, respectively. Conversely, DH is expected to expand by 43% for the far-future period but shrink by 42% for the mid-future period. This study fills a gap by redefining Borneo's climate zones based on an increased number of effective parameters and projecting future shifts, utilizing advanced clustering methods (FCM) under CMIP6 scenarios. Importantly, it contributes by ranking GCMs using RIMs and CPI across multiple climate parameters, addressing a previous gap in GCM assessment. The study's findings can facilitate cross-border collaboration by providing a shared understanding of climate dynamics and informing joint environmental management and disaster response efforts.

Spatiotemporal changes in future precipitation of Afghanistan for shared socioeconomic pathways.

Global warming induces spatially heterogeneous changes in precipitation patterns, highlighting the need to assess these changes at regional scales. This assessment is particularly critical for Afghanistan, where agriculture serves as the primary livelihood for the population. New global climate model (GCM) simulations have recently been released for the recently established shared socioeconomic pathways (SSPs). This requires evaluating projected precipitation changes under these new scenarios and subsequent policy updates. This research employed six GCMs from the CMIP6 to project spatial and temporal precipitation changes across Afghanistan under all SSPs, including SSP1-1.9, SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5. The employed GCMs were bias-corrected using the Global Precipitation Climatological Center's (GPCC) monthly gridded precipitation data with a 1.0° spatial resolution. Subsequently, the climate change factor was calculated to assess precipitation changes for both the near future (2020-2059) and the distant future (2060-2099). The bias-corrected projections' multi-model ensemble (MME) revealed increased precipitation across most of Afghanistan for SSPs with higher emissions scenarios. The bias-corrected simulations showed a substantial increase in summer precipitation of around 50%, projected under SSP1-1.9 in the southwestern region, while a decline of over 50% is projected in the northwestern region until 2100. The annual precipitation in the northwest region was projected to increase up to 15% for SSP1-2.6. SSP2-4.5 showed a projected annual precipitation increase of around 20% in the southwestern and certain eastern regions in the far future. Furthermore, a substantial rise of approximately 50% in summer precipitation under SSP3-7.0 is expected in the central and western regions in the far future. However, it is crucial to note that the projected changes exhibit considerable uncertainty among different GCMs.

Daily scale air quality index forecasting using bidirectional recurrent neural networks: Case study of Delhi, India.

This research was established to accurately forecast daily scale air quality index (AQI) which is an essential environmental index for decision-making. Researchers have projected different types of models and methodologies for AQI forecasting, such as statistical techniques, machine learning (ML), and most recently deep learning (DL) models. The modelling development was adopted for Delhi city, India which is a major city with air pollution issues simialir to entire urban cities of India especially during winter seasons. This research was predicted AQI using different versions of DL models including Long-Short Term Memory (LSTM), Bidirectional LSTM (Bi-LSTM) and Bidirectional Recurrent Neural Networks (Bi-RNN) in addition to Kernel Ridge Regression (KRR). Results indicated that Bi-RNN model consistently outperformed the other models in both training and testing phases, while the KRR model consistently displayed the weakest performance. The outstanding performance of the models development displayed the requirement of adequate data to train the models. The outcomes of the models showed that LSTM, BI-LSTM, KRR had lower performance compared with Bi-RNN models. Statistically, Bi-RNN model attained maximum cofficient of determination (R2 = 0.954) and minimum root mean square error (RMSE = 25.755). The proposed model in this research revealed the robust predictable to provide a valuable base for decision-making in the expansion of combined air pollution anticipation and control policies targeted at addressing composite air pollution problems in the Delhi city.

Surface water quality index forecasting using multivariate complementing approach reinforced with locally weighted linear regression model.

River water quality management and monitoring are essential responsibilities for communities near rivers. Government decision-makers should monitor important quality factors like temperature, dissolved oxygen (DO), pH, and biochemical oxygen demand (BOD). Among water quality parameters, the BOD throughout 5 days is an important index that must be detected by devoting a significant amount of time and effort, which is a source of significant concern in both academic and commercial settings. The traditional experimental and statistical methods cannot give enough accuracy or solve the problem for a long time to detect something. This study used a unique hybrid model called MVMD-LWLR, which introduced an innovative method for forecasting BOD in the Klang River, Malaysia. The hybrid model combines a locally weighted linear regression (LWLR) model with a wavelet-based kernel function, along with multivariate variational mode decomposition (MVMD) for the decomposition of input variables. In addition, categorical boosting (Catboost) feature selection was used to discover and extract significant input variables. This combination of MVMD-LWLR and Catboost is the first use of such a complete model for predicting BOD levels in the given river environment. In addition, an optimization process was used to improve the performance of the model. This process utilized the gradient-based optimization (GBO) approach to fine-tune the parameters and better the overall accuracy of predicting BOD levels. To assess the robustness of the proposed method, we compared it to other popular models such as kernel ridge (KRidge) regression, LASSO, elastic net, and gaussian process regression (GPR). Several metrics, comprising root-mean-square error (RMSE), R (correlation coefficient), U95% (uncertainty coefficient at 95% level), and NSE (Nash-Sutcliffe efficiency), as well as visual interpretation, were used to evaluate the predictive efficacy of hybrid models. Extensive testing revealed that, in forecasting the BOD parameter, the MVMD-LWLR model outperformed its competitors. Consequently, for BOD forecasting, the suggested MVMD-LWLR optimized with the GBO algorithm yields encouraging and reliable results, with increased forecasting accuracy and minimal error.

Fusion-based approach for hydrometeorological drought modeling: a regional investigation for Iran.

The objective of this study was to model a new drought index called the Fusion-based Hydrological Meteorological Drought Index (FHMDI) to simultaneously monitor hydrological and meteorological drought. Aiming to estimate drought more accurately, local measurements were classified into various clusters using the AGNES clustering algorithm. Four single artificial intelligence (SAI) models-namely, Gaussian Process Regression (GPR), Ensemble, Feedforward Neural Networks (FNN), and Support Vector Regression (SVR)-were developed for each cluster. To promote the results of single of products and models, four fusion-based approaches, namely, Wavelet-Based (WB), Weighted Majority Voting (WMV), Extended Kalman Filter (EKF), and Entropy Weight (EW) methods, were used to estimate FHMDI in different time scales, precipitation, and runoff. The performance of single and combined products and models was assessed through statistical error metrics, such as Kling-Gupta efficiency (KGE), Mean Bias Error (MBE), and Normalized Root Mean Square Error (NRMSE). The performance of the proposed methodology was tested over 24 main river basins in Iran. The validation results of the FHMDI (the compliance of the index with the pre-existing drought index) revealed that it accurately identified drought conditions. The results indicated that individual products performed well in some river basins, while fusion-based models improved dataset accuracy more compared to local measurements. The WMV with the highest accuracy (lowest NRMSE) had a good performance in 60% of the cases compared to all other products and fusion-based models. WMV also showed higher efficiency in 100% of the cases than all other fusion-based and SAI models for simultaneous hydrological and meteorological drought estimation. In light of these findings, we recommend the use of fusion-based approach to improve drought modeling.

Design, construction and field testing of a manually feeding semiautomatic sugarcane dud chipper.

Sugarcane is the main sugar crop, and sugar is an important agricultural product in Egypt. There are many problems with the technology used in the current planting method of sugarcane, which has a great impact on the planting quality of sugarcane, which have a series of problems, such as low cutting efficiency and poor quality. Therefore, the aim of the current study was to design, construct, and field testing of a semiautomatic sugarcane bud chipper assisted with pivot knives for cutting sugarcane buds and germinating them in plastic trays inside a greenhouse until they reached an average length of 35 cm, and then planting them in the field. In the field tests five cutting speeds (35, 40, 45, 50, and 56 rpm. (Revolution Per minute), three cutting knives (1.5, 2.0, and 2.5 mm) were used for cutting sugarcane stalks with four different diameters (1.32, 1.82, 2.43, and 2.68 cm). The obtained results showed that the values of the damage index and invisible losses were within acceptable limits (ranging between - 1.0 and 0.0) for all the variables under the test. Still, the lowest damage index and invisible losses were recorded with the buds that were cut with a knife of 1.5 mm thickness and cutting speeds less than 50 rpm. The skipping rate increases with the increase in cutting speed and stalk diameter, ranging between 0.0 to 13%. The maximum machine productivity was 110 Buds per minute at a cutting speed of 35 rpm and stalk diameter of 1.32 cm. The paper's findings have important application values for promoting the designing and development of sugarcane bud chipper and sugarcane planting technology in the future.

Groundwater quality characterization using an integrated water quality index and multivariate statistical techniques.

This study attempts to characterize and interpret the groundwater quality (GWQ) using a GIS environment and multivariate statistical approach (MSA) for the Jakham River Basin (JRB) in Southern Rajasthan. In this paper, analysis of various statistical indicators such as the Water Quality Index (WQI) and multivariate statistical methods, i.e., principal component analysis and correspondence analysis (PCA and CA), were implemented on the pre and post-monsoon water quality datasets. All these methods help identify the most critical factor in controlling GWQ for potable water. In pre-monsoon (PRM) and post-monsoon (POM) seasons, the computed value of WQI has ranged between 28.28 to 116.74 and from 29.49 to 111.98, respectively. As per the GIS-based WQI findings, 63.42 percent of the groundwater samples during the PRM season and 42.02 percent during the POM were classed as 'good' and could be consumed for drinking. The Principal component analysis (PCA) is a suitable tool for simplification of the evaluation process in water quality analysis. The PCA correlation matrix defines the relation among the water quality parameters, which helps to detect the natural or anthropogenic influence on sub-surface water. The finding of PCA's factor analysis shows the impact of geological and human intervention, as increased levels of EC, TDS, Na+, Cl-, HCO3-, F-, and SO42- on potable water. In this study, hierarchical cluster analysis (HCA) was used to categories the WQ parameters for PRM and POR seasons using the Ward technique. The research outcomes of this study can be used as baseline data for GWQ development activities and protect human health from water-borne diseases in the southern region of Rajasthan.

Harnessing probiotics and prebiotics as eco-friendly solution for cleaner shrimp aquaculture production: A state of the art scientific consensus.

In recent years, the advancement and greater magnitude of products, which led to the intensification in shrimp aquaculture is the result of utilization of modern tools and synchronization with other fields of science like microbiology and biotechnology. This intensification led to the elevation of disorders such as the development of several diseases and complications associated with biofouling. The use of antibiotics in aquaculture is discouraged due to their certain hazardous paraphernalia. Consequently, there has been a growing interest in exploring alternative strategies, with probiotics and prebiotics emerging as environmentally friendly substitutes for antibiotic treatments in shrimp aquaculture. This review highlighted the results of probiotics and prebiotics administration in the improvement of water quality, enhancement of growth and survival rates, stress resistance, health status and disease resistance, modulation of enteric microbiota and immunomodulation of different shrimp species. Additionally, the study sheds light on the comprehensive role of prebiotics and probiotics in elucidating the mechanistic framework, contributing to a deeper understanding of shrimp physiology and immunology. Besides their role in growth and development of shrimp aquaculture, the eco-friendly behavior of prebiotics and probiotics have made them ideal to control pollution in aquaculture systems. This comprehensive exploration of prebiotics and probiotics aims to address gaps in our understanding, including the economic aspects of shrimp aquaculture in terms of benefit-cost ratio, and areas worthy of further investigation by drawing insights from previous studies on different shrimp species. Ultimately, this commentary seeks to contribute to the evolving body of knowledge surrounding prebiotics and probiotics, offering valuable perspectives that extend beyond the ecological dimensions of shrimp aquaculture.

Deep learning versus hybrid regularized extreme learning machine for multi-month drought forecasting: A comparative study and trend analysis in tropical region.

Drought is a hazardous natural disaster that can negatively affect the environment, water resources, agriculture, and the economy. Precise drought forecasting and trend assessment are essential for water management to reduce the detrimental effects of drought. However, some existing drought modeling techniques have limitations that hinder precise forecasting, necessitating the exploration of suitable approaches. This study examines two forecasting models, Long Short-Term Memory (LSTM) and a hybrid model integrating regularized extreme learning machine and Snake algorithm, to forecast hydrological droughts for one to six months in advance. Using the Multivariate Standardized Streamflow Index (MSSI) computed from 58 years of streamflow data for two drier Malaysian stations, the models forecast droughts and were compared to classical models such as gradient boosting regression and K-nearest model for validation purposes. The RELM-SO model outperformed other models for forecasting one month ahead at station S1, with lower root mean square error (RMSE = 0.1453), mean absolute error (MAE = 0.1164), and a higher Nash-Sutcliffe efficiency index (NSE = 0.9012) and Willmott index (WI = 0.9966). Similarly, at station S2, the hybrid model had lower (RMSE = 0.1211 and MAE = 0.0909), and higher (NSE = 0.8941 and WI = 0.9960), indicating improved accuracy compared to comparable models. Due to significant autocorrelation in the drought data, traditional statistical metrics may be inadequate for selecting the optimal model. Therefore, this study introduced a novel parameter to evaluate the model's effectiveness in accurately capturing the turning points in the data. Accordingly, the hybrid model significantly improved forecast accuracy from 19.32 % to 21.52 % when compared with LSTM. Besides, the reliability analysis showed that the hybrid model was the most accurate for providing long-term forecasts. Additionally, innovative trend analysis, an effective method, was used to analyze hydrological drought trends. The study revealed that October, November, and December experienced higher occurrences of drought than other months. This research advances accurate drought forecasting and trend assessment, providing valuable insights for water management and decision-making in drought-prone regions.

High adsorptive performance of chitosan-microalgae-carbon-doped TiO2 (kronos)/ salicylaldehyde for brilliant green dye adsorption: Optimization and mechanistic approach.

A composite of chitosan biopolymer with microalgae and commercial carbon-doped titanium dioxide (kronos) was modified by grafting an aromatic aldehyde (salicylaldehyde) in a hydrothermal process for the removal of brilliant green (BG) dye. The resulting Schiff's base Chitosan-Microalgae-TiO2 kronos/Salicylaldehyde (CsMaTk/S) material was characterised using various analytical methods (conclusive of physical properties using BET surface analysis method, elemental analysis, FTIR, SEM-EDX, XRD, XPS and point of zero charge). Box Behnken Design was utilised for the optimisation of the three input variables, i.e., adsorbent dose, pH of the media and contact time. The optimum conditions appointed by the optimisation process were further affirmed by the desirability test and employed in the equilibrium studies in batch mode and the results exhibited a better fit towards the pseudo-second-order kinetic model as well as Freundlich and Langmuir isotherm models, with a maximum adsorption capacity of 957.0 mg/g. Furthermore, the reusability study displayed the adsorptive performance of CsMaTk/S remains effective throughout five adsorption cycles. The possible interactions between the dye molecules and the surface of the adsorbent were derived based on the analyses performed and the electrostatic attractions, H-bonding, Yoshida-H bonding, π-π and n-π interactions are concluded to be the responsible forces in this adsorption process.

Heavy metals prediction in coastal marine sediments using hybridized machine learning models with metaheuristic optimization algorithm.

This study proposes different standalone models viz: Elman neural network (ENN), Boosted Tree algorithm (BTA), and f relevance vector machine (RVM) for modeling arsenic (As (mg/kg)) and zinc (Zn (mg/kg)) in marine sediments owing to anthropogenic activities. A heuristic algorithm based on the potential of RVM and a flower pollination algorithm (RVM-FPA) was developed to improve the prediction performance. Several evaluation indicators and graphical methods coupled with visualized cumulative probability function (CDF) were used to evaluate the accuracy of the models. Akaike (AIC) and Schwarz (SCI) information criteria based on Dickey-Fuller (ADF) and Philip Perron (PP) tests were introduced to check the reliability and stationarity of the data. The prediction performance in the verification phase indicated that RVM-M2 (PBAIS = -o.0465, MAE = 0.0335) and ENN-M2 (PBAIS = 0.0043, MAE = 0.0322) emerged as the best model for As (mg/kg) and Zn (mg/kg), respectively. In contrast with the standalone approaches, the simulated hybrid RVM-FPA proved merit and the most reliable, with a 5 % and 18 % predictive increase for As (mg/kg) and Zn (mg/kg), respectively. The study's findings validated the potential for estimating complex HMs through intelligent data-driven models and heuristic optimization. The study also generated valuable insights that can inform the decision-makers and stockholders for environmental management strategies.

A review on fluoride contamination in groundwater and human health implications and its remediation: A sustainable approaches.

Contamination of drinking water due to fluoride (F-) is a major concern worldwide. Although fluoride is an essential trace element required for humans, it has severe human health implications if levels exceed 1.5 mg. L-1 in groundwater. Several treatment technologies have been adopted to remove fluoride and reduce the exposure risk. The present article highlights the source, geochemistry, spatial distribution, and health implications of high fluoride in groundwater. Also, it discusses the underlying mechanisms and controlling factors of fluoride contamination. The problem of fluoride-contaminated water is more severe in India's arid and semiarid regions than in other Asian countries. Treatment technologies like adsorption, ion exchange, precipitation, electrolysis, electrocoagulation, nanofiltration, coagulation-precipitation, and bioremediation have been summarized along with case studies to look for suitable technology for fluoride exposure reduction. Although present technologies are efficient enough to remove fluoride, they have specific limitations regarding cost, labour intensity, and regeneration requirements.

Drought trends projection under future climate change scenarios for Iran region.

The study highlights the potential characteristics of droughts under future climate change scenarios. For this purpose, the changes in Standardized Precipitation Evapotranspiration Index (SPEI) under the A1B, A2, and B1 climate change scenarios in Iran were assessed. The daily weather data of 30 synoptic stations from 1992 to 2010 were analyzed. The HadCM3 statistical model in the LARS-WG was used to predict the future weather conditions between 2011 and 2112, for three 34-year periods; 2011-2045, 2046-2079, and 2080-2112. In regard to the findings, the upward trend of the potential evapotranspiration in parallel with the downward trend of the precipitation in the next 102 years in three scenarios to the base timescale was transparent. The frequency of the SPEI in the base month indicated that 17.02% of the studied months faced the drought. Considering the scenarios of climate change for three 34-year periods (i.e., 2011-2045, 2046-2079, and 2080-2112) the average percentages of potential drought occurrences for all the stations in the next three periods will be 8.89, 16.58, and 27.27 respectively under the B1 scenario. While the predicted values under the A1B scenario are 7.63, 12.66, and 35.08%respectively. The relevant findings under the A2 scenario are 6.73, 10.16, 40.8%. As a consequence, water shortage would be more serious in the third period of study under all three scenarios. The percentage of drought occurrence in the future years under the A2, B1, and A1B will be 19.23%, 17.74%, and 18.84%, respectively which confirms the worst condition under the A2 scenario. For all stations, the number of months with moderate drought was substantially more than severe and extreme droughts. Considering the A2 scenario as a high emission scenario, the analysis of SPEI frequency illustrated that the proportion of dry periods in regions with humid and cool climate is more than hot and warm climates; however, the duration of dry periods in warmer climates is longer than colder climates. Moreover, the temporal distribution of precipitation and potential evapotranspiration indicated that in a large number of stations, there is a significant difference between them in the middle months of the year, which justifies the importance of prudent water management in warm months.