Incorporating Binary Metal Oxides in Poly(ethylene oxide)-Based Solid Electrolytes by Vapor Phase Infiltration.

Vapor phase infiltration (VPI) derived from atomic layer deposition (ALD) enables inorganic materials to nucleate and grow within the free volume of polymers, which has shown promising prospects in the field of composite solid polymer electrolytes (CSPEs). However, there are only a few types of metal oxides that can be incorporated into the polymer matrix by VPI, let alone binary metal oxides, due to the limited knowledge of the VPI synthesis process. To combine the merits of different metal oxides, we investigate the VPI method to prepare ZnO-Al2O3 composites in poly(ethylene oxide) (PEO). When the introducing order is Al2O3/ZnO (AZO), due to the extremely high reactivity of trimethyl aluminum (TMA) with PEO, VPI-Al2O3 will accumulate near the surface of PEO. The surface Al2O3 layer inhibits the further diffusion of the diethyl zinc (DEZ) into the PEO matrix, leading to weak polymer-filler interactions and limited improvement of the Li+ conduction. In the incorporation order of ZnO/Al2O3 (ZAO), the moderate reactivity of DEZ renders the uniform distribution of VPI-ZnO within PEO, and the following TMA can both react with PEO and VPI-ZnO particles near the surface of PEO, which not only preserves the interactions between VPI-ZnO and PEO but also better inhibits the growth of lithium dendrites. The incorporation order plays a crucial role in the morphology and composition of binary metal oxides synthesized by VPI.

An archetype of the electron-unobstructed core-shell composite with inherent selectivity: conductive metal-organic frameworks encapsulated with metal nanoparticles.

The acquisition of monodisperse metal nanoparticles covered by conductive metal-organic frameworks (cMOFs) is an archetype of an electron-unobstructed core-shell composite, valued for its potential electrocatalytic ability and selectivity enhancement. In this work, Pt@cMOF composites with direct interfaces showed better performance in the oxygen reduction reaction than composites with indirect interfaces or with lower electroconductivity shells. This composite was proved to exhibit the ability to expedite electron transfer with different thicknesses of electrode materials. The detailed mechanism was studied by exploring the conductivity of shell materials, interfaces between cores and shells, and the surface electronic structure of the nanoparticles. We also report reaction selectivity from the inherent porous shells in the selective reduction of cinnamyl alcohol.

Insights into the Solid-State Synthesis of Defect-Rich Zr-UiO-66.

Metal-organic frameworks (MOFs), a new type of porous material, have shown many possible applications in gas storage and separation, biomedicine, catalysis, and so on. While most MOFs are synthesized through solvothermal synthesis where a large quantity of organic solvent is used, the green synthetic approach using a minimized amount of solvent is important to prevent irreversible environmental compacts. In this study, we successfully synthesized Zr-MOFs with SBUs (e.g., UiO-66 and MIL-140A) using a simple metal source and investigated the role of organic modulators in modulating the MOF structures during solid-state synthesis. Meanwhile, UiO-66 rich in defects synthesized via a solid-state conversion strategy shows good catalytic performance for the ring-opening of epoxides with alcohols. This work contributes to the understanding of the role of organic modulators in the solid-state synthesis of MOFs.

Synthesis of a Spatially Confined, Highly Durable, and Fully Exposed Pd Cluster Catalyst via Sequential Site-Selective Atomic Layer Deposition.

Bottom-up synthesis based on site-selective atomic layer deposition is a powerful atomic-scale processing approach to fabricate materials with desired functionalities. Typical selective atomic layer deposition (ALD) can be achieved using selective activation of a growth area or selective deactivation of a protected area. In this work, we explored the site selectivity based on the difference of the inherent surface reactivity between different materials and within the same materials. By sequentially applying two site-selective atomic layer deposition, the ALD Pd catalyst is spatially confined on ALD SnO2 modified h-BN substrate Pd/SnO2/h-BN shows improved catalytic activity and stability due to strong metal-support interactions and spatial confinement. The results reveal that sequential site-selective ALD is a feasible and effective synthesis strategy that provides an attractive path toward designing and developing highly stable catalysts.

An Ultrathin Functional Layer Based on Porous Organic Cages for Selective Ion Sieving and Lithium-Sulfur Batteries.

Thin films with effective ion sieving ability are highly desired in energy storage and conversion devices, including batteries and fuel cells. However, it remains challenging to design and fabricate cost-effective and easy-to-process ultrathin films for this purpose. Here, we report a 300 nm-thick functional layer based on porous organic cages (POCs), a new class of porous molecular materials, for fast and selective ion transport. This solution processable material allows for the design of thin films with controllable thickness and tunable porosity by tailoring cage chemistry for selective ion separation. In the prototype, the functional layer assembled by CC3 can selectively sieve Li+ ions and efficiently suppress undesired polysulfides with minimal sacrifice for the system's total energy density. Separators modified with POC thin films enable batteries with good cycle performance and rate capability and offer an attractive path toward the development of future high-energy-density energy storage devices.

A direct solvent-free conversion approach to prepare mixed-metal metal-organic frameworks from doped metal oxides.

We propose a novel strategy to introduce platinum into the metal nodes of ZIF-8 by preloading Pt as a dopant in ZnO (Pt-ZnO) and then convert it to Pt doped ZIF-8 (Pt-ZIF-8) through a chemical vapor deposition (CVD) approach. The solvent-free conversion of Pt-ZnO to Pt-ZIF-8 allows the Pt dopant in ZnO to coordinate with organic linkers directly without the formation of Pt nanoparticles, which is a general issue of many methods. This general synthesis strategy may facilitate the discovery of MMOFs that have not been reported previously.