RESUMEN
Recently, there has been a growing interest in the consumption of plant-based foods such as vegetables and grains for the purpose of disease prevention and treatment. Adlay seeds contain physiologically active substances, including coixol, coixenolide, and lactams. In this study, adlay sprouts were cultivated and harvested at various time points, specifically at 3, 5, 7, 9, and 11 days after sowing. The antioxidant activity of the extracts was evaluated using assays such as DPPH radical scavenging, ABTS radical scavenging, reducing power, and total polyphenol contents. The toxicity of the extracts was assessed using cell culture and the WST-1 assay. The aboveground components of the sprouts demonstrated a significant increase in length, ranging from 2.75 cm to 21.87 cm, weight, ranging from 0.05 g to 0.32 g, and biomass, ranging from 161.4 g to 1319.1 g, as the number of days after sowing advanced, reaching its peak coixol content of 39.38 mg/g on the third day after sowing. Notably, the antioxidant enzyme activity was highest between the third and fifth days after sowing. Regarding anti-inflammatory activity, the inhibition of cyclooxygenase 2 (COX-2) expression was most prominent in samples harvested from the ninth to eleventh days after sowing, corresponding to the later stage of growth. While the overall production mass increased with the number of days after sowing, considering factors such as yield increase index per unit area, turnover rate, and antioxidant activity, harvesting at the early growth stage, specifically between the fifth and seventh days after sowing, was found to be economically advantageous. Thus, the quality, antioxidant capacity, and anti-inflammatory activity of adlay sprouts varied depending on the harvest time, highlighting the importance of determining the appropriate harvest time based on the production objectives. This study demonstrates the changes in the growth and quality of adlay sprouts in relation to the harvest time, emphasizing the potential for developing a market for adlay sprouts as a new food product.
RESUMEN
Biomolecule-conjugated metal nanoparticles (NPs) have been primarily used as colorimetric labels in affinity-based bioassays for point-of-care testing. A facile electrochemical detection scheme using a rapid nanocatalytic reaction of a metal NP label is required to achieve more quantitative and sensitive point-of-care testing. Moreover, all the involved components should be stable in their dried form and solution. This study developed a stable component set that allows for rapid and simple nanocatalytic reactions combined with electrochemical detection and applied it for the sensitive detection of parathyroid hormone (PTH). The component set consists of an indium-tin oxide (ITO) electrode, ferrocenemethanol (FcMeOH), antibody-conjugated Au NPs, and ammonia borane (AB). Despite being a strong reducing agent, AB is selected because it is stable in its dried form and solution. The slow direct reaction between FcMeOH+ and AB provides a low electrochemical background, and the rapid nanocatalytic reaction allows for a high electrochemical signal. Under optimal conditions, PTH could be quantified in a wide range of concentrations in artificial serum, with a detection limit of â¼0.5 pg/mL. Clinical validation of the developed PTH immunosensor using real serum samples indicates that this novel electrochemical detection scheme is promising for quantitative and sensitive immunoassays for point-of-care testing.
Asunto(s)
Técnicas Biosensibles , Inmunoconjugados , Nanopartículas del Metal , Oro , Hormona Paratiroidea , Inmunoensayo , Técnicas Electroquímicas , Límite de Detección , ElectrodosRESUMEN
Amide hydrolysis using enzyme labels, such as proteases, occurs at a slower rate than phosphoester and carboxyl ester hydrolysis. Thus, it is not very useful for obtaining high signal amplification in biosensors. However, amide hydrolysis is less sensitive to nonenzymatic spontaneous hydrolysis, allowing for lower background levels. Herein, we report that amide hydrolysis by DT-diaphorase (DT-D) occurs rapidly and that its combination with five redox-cycling reactions allows for the development of a highly sensitive electrochemical immunosensor. DT-D rapidly generates ortho-aminohydroxy-naphthalene (oAN) from its amide substrate via amide hydrolysis, which not even trypsin, a highly catalytic protease, can achieve. NADH, which is required for amide hydrolysis, advantageously acts as a reducing agent for rapid electrooxidation-based redox-cycling reactions. In the presence of oAN, DT-D, and NADH, two redox-cycling reactions rapidly occur. In the additional presence of an electron mediator, Ru(NH3)63+ [Ru(III)], three more redox-cycling reactions occur because Ru(III) reacts rapidly with oAN and DT-D. Although the O2-related redox-cycling reactions and redox reaction decrease electrochemical signals, this signal-decreasing effect is not significant in air-saturated solutions. The slow electrooxidation of NADH at an indium tin oxide electrode and sluggish reaction between NADH and Ru(III) allow for low electrochemical backgrounds. When the developed signal amplification scheme is tested for the sandwich-type electrochemical detection of parathyroid hormone (PTH), a detection limit of â¼1 pg/mL is obtained. The detection method is highly sensitive and can accurately measure PTH in serum samples.
Asunto(s)
Técnicas Biosensibles , Hidrólisis , Técnicas Biosensibles/métodos , NAD , Inmunoensayo/métodos , Oxidación-Reducción , Endopeptidasas , Técnicas ElectroquímicasRESUMEN
The high and selective catalytic activities of tyrosinase (Tyr) have frequently led to its application in sensitive biosensors. However, in affinity-based biosensors, the use of Tyr as a catalytic label is less common compared to horseradish peroxidase and alkaline phosphatase owing to the fact that phenolic Tyr substrates have yet to be investigated in detail. Herein, four phenolic compounds that have lower formal potentials than phenol were examined for their applicability as Tyr substrates, and three reducing agents were examined as potential strong reducing agents for electrochemical-chemical (EC) redox cycling involving an electrode, a Tyr product, and a reducing agent. The combination of 4-methoxyphenol (MP) and ammonia-borane (AB) allows for (i) a high electrochemical signal level owing to rapid EC redox cycling and (ii) a low electrochemical background level owing to the slow oxidation of AB at a low applied potential and no reaction between MP and AB. When this combination was applied to an electrochemical immunosensor for parathyroid hormone (PTH) detection, a detection limit of 2 pg/mL was obtained. This detection limit is significantly lower than that obtained when a combination of phenol and AB was employed (300 pg/mL). It was also found that the developed immunosensor works well in PTH detection in clinical serum samples. This new phenolic substrate could therefore pave the way for Tyr to be more commonly used as a catalytic label in affinity-based biosensors.
Asunto(s)
Técnicas Biosensibles , Monofenol Monooxigenasa , Técnicas Electroquímicas , Inmunoensayo , Fenol , Sustancias ReductorasRESUMEN
Enzyme-induced seedless Ag deposition is useful for selective Ag deposition and subsequent electrochemical Ag oxidation; however, a washing step is required after the deposition and before the electrochemical oxidation as the enzyme substrate can be oxidized during the electrochemical oxidation. Here, we report a fast Ag deposition method using a redox enzyme and quinone substrate that does not require a washing step. We found that the quinone substrate is reduced by a redox enzyme label, which is later oxidized to its original form via the reduction of Ag+ to Ag. Moreover, the quinone substrate is not electrochemically oxidized during the electrochemical Ag oxidation. We selected one diaphorase and 1,4-naphthoquinone from among seven redox enzymes (four diaphorases and three glucose-oxidizing enzymes) and six quinones, respectively. We applied this Ag deposition method for the detection of thyroid-stimulating hormone (TSH) over a dynamic range from 100 fg/mL to 100 ng/mL and found that TSH could be detected at concentrations as low as approximately 100 fg/mL in artificial serum. Therefore, the Ag deposition strategy developed in this study exhibits promising potential for ultrasensitive clinical applications.
Asunto(s)
Técnicas Biosensibles , Benzoquinonas , Técnicas Electroquímicas , Oxidación-Reducción , TirotropinaRESUMEN
The commonly required properties of diffusive electron mediators for point-of-care testing are rapid dissolubility, high stability, and moderate formal potential in aqueous solutions. Inspired by nature, various quinone-containing electron mediators have been developed; however, satisfying all these requirements remains a challenge. Herein, a strategic design toward quinones incorporating sulfonated thioether and nitrogen-containing heteroarene moieties as solubilizing, stabilizing, and formal potential-modulating groups is reported. A systematic investigation reveals that di(thioether sulfonate)-substituted quinoline-1,4-dione (QLS) and quinoxaline-1,4-dione (QXS) display water solubilities of ≈1 m and are rapidly dissoluble. By finely balancing the electron-donating effect of the thioethers and the electron-withdrawing effect of the nitrogen atom, formal potentials suitable for electrochemical biosensors are achieved with QLS and QXS (-0.15 and -0.09 V vs Ag/AgCl, respectively, at pH 7.4). QLS is stable for >1 d in PBS (pH 7.4) and for 1 h in tris buffer (pH 9.0), which is sufficient for point-of-care testing. Furthermore, QLS, with its high electron mediation ability, is successfully used in biosensors for sensitive detection of glucose and parathyroid hormone, demonstrating detection limits of ≈0.3 × 10-3 m and ≈2 pg mL-1 , respectively. This strategy produces organic electron mediators exhibiting rapid dissolution and high stability, and will find broad application beyond quinone-based biosensors.
Asunto(s)
Técnicas Biosensibles , Electrones , Glucosa , Glucosa Oxidasa/química , SulfurosRESUMEN
Assembly of bacterial flagellar hook requires FlgD, a protein known to form the hook cap. Symmetry mismatch between the hook and the hook cap is believed to drive efficient assembly of the hook in a way similar to the filament cap helping filament assembly. However, the hook cap dependent mechanism of hook assembly has remained poorly understood. Here, we report the crystal structure of the hook cap composed of five subunits of FlgD from Salmonella enterica at 3.3 Å resolution. The pentameric structure of the hook cap is divided into two parts: a stalk region composed of five N-terminal domains; and a petal region containing five C-terminal domains. Biochemical and genetic analyses show that the N-terminal domains of the hook cap is essential for the hook-capping function, and the structure now clearly reveals why. A plausible hook assembly mechanism promoted by the hook cap is proposed based on the structure.
Asunto(s)
Proteínas Bacterianas/química , Flagelos/metabolismo , Salmonella enterica/químicaRESUMEN
Bienzymatic systems are often used with electrochemical affinity biosensors to achieve high signal levels and/or low background levels. It is important to select two enzymes whose reactions do not exhibit mutual interference but have similar optimal conditions. Here, we report a sensitive electrochemical immunosensor based on a bienzymatic system consisting of ß-galactosidase (Gal, a hydrolase enzyme) and flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH, a redox enzyme). Both enzymes showed high activities at neutral pH, the reactions catalyzed by them did not exhibit mutual interference, and the electrochemical-enzymatic redox cycling based on FAD-GDH coupled with enzymatic amplification by Gal enabled high signal amplification. Among the three amino-hydroxy-naphthalenes and 4-aminophenol (potential Gal products), 4-amino-1-naphthol showed the highest signal amplification. Glucose, as an electro-inactive, stable reducing agent for redox cycling, helped in achieving low background levels. Our bienzymatic system could detect parathyroid hormone at a detection limit of â¼0.2 pg mL-1, implying that it can be used for highly sensitive electrochemical detection of parathyroid hormone and other biomarkers in human serum.
Asunto(s)
Técnicas Biosensibles , Glucosa 1-Deshidrogenasa , Técnicas Electroquímicas , Humanos , Inmunoensayo , Oxidación-Reducción , beta-GalactosidasaRESUMEN
Horseradish peroxidase (HRP)-based electrochemical immunoassays are considered promising techniques for point-of-care clinical diagnostics, but the necessary addition of unstable H2O2 in the enzymatic system may hinder their practical application. Although glucose oxidase (GOx) has been widely explored for in situ generation of H2O2 in HRP-based immunoassay, the GOx-catalyzed reduction of oxidized peroxidase substrate may limit the immunosensing performance. Here, we report a sensitive electrochemical immunosensor based on a choline oxidase (ChOx)-HRP cascade reaction. In this design, ChOx catalyzes the oxidation of choline, during which H2O2 is generated in situ and thus oxidizes acetaminophen (APAP) in the presence of HRP. The electrochemical behavior of APAP in the ChOx-HRP cascade was compared with that of the commonly used GOx-HRP cascade, which confirmed that ChOx could be a superior preceding enzyme for sensitive immunoassay based on the bienzymatic cascade. The developed ChOx-HRP cascade was also further explored for a sandwich-type electrochemical immunoassay of parathyroid hormone in artificial and clinical serum. The calculated detection limit was ~3 pg/mL, indicating that the ChOx-HRP cascade is especially promising for highly sensitive electrochemical immunoassays when APAP is used as the peroxidase substrate.
Asunto(s)
Técnicas Biosensibles , Peroxidasa , Oxidorreductasas de Alcohol , Técnicas Electroquímicas , Peroxidasa de Rábano Silvestre , Peróxido de Hidrógeno , InmunoensayoRESUMEN
Metal nanoparticle surfaces are used for peroxidase- and oxidase-like nanozymes but not for esterase-like nanozymes. It is challenging to obtain rapid catalytic hydrolysis on a metal surface and even more so without a catalytically labile substrate. Here, we report that metal nanoparticle surfaces rapidly catalyze non-redox ester hydrolysis in the presence of redox H3 N-BH3 (AB). Metal hydrides are readily generated on a Pt nanoparticle (PtNP) from AB, and as a result the PtNP becomes electron-rich, which might assist nucleophilic attack of H2 O on the carbonyl group of an ester. The nanozyme system based on PtNP, AB, and 4-aminonaphthalene-1-yl acetate provides an electrochemical signal-to-background ratio much higher than natural enzymes, due to the rapid ester hydrolysis and redox cycling involving the hydrolysis product. The nanozyme system is applied in a sensitive electrochemical immunosensor for thyroid-stimulating hormone detection. The calculated detection limit is approximately 0.3â pg mL-1 , which indicates the high sensitivity of the immunosensor using the PtNP nanozyme.
Asunto(s)
Amoníaco/química , Boranos/química , Ésteres/química , Nanopartículas del Metal/química , Platino (Metal)/química , Hormonas Tiroideas/análisis , Técnicas Biosensibles , Catálisis , Técnicas Electroquímicas , Hidrólisis , Inmunoensayo , Estructura Molecular , Oxidación-Reducción , Propiedades de SuperficieRESUMEN
In horseradish peroxidase (HRP)-based electrochemical immunosensing, an appropriate HRP substrate needs to be chosen to obtain a high electrochemical signal-to-background ratio. This is limited by the unwanted electrochemical reduction of H2O2, oxidation of the substrate, and the slow electrochemical reduction of the product. Herein, we report acetaminophen (AMP) as a new HRP substrate that allows for highly sensitive immunosensing. Electrochemical behavior and immunosensing performance using AMP are compared with those using the most popular HRP substrate, hydroquinone (HQ). To maintain a high electrocatalytic activity even at an electrode modified with an immunosensing layer, an indium tin oxide electrode partially modified with reduced graphene oxide is employed. AMP allows for a higher signal-to-background ratio than HQ, because the formal potential of AMP is 0.28 V higher than that of HQ and the redox reaction of AMP is as reversible as that of HQ, resulting in a lower detection limit in a sandwich-type immunoassay using AMP for thyroid-stimulating hormone detection. The calculated detection limit is ~0.2 pg/mL. The use of AMP as an HRP substrate is especially promising for highly sensitive electrochemical immunoassays.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Acetaminofén , Técnicas Electroquímicas , Oro , Peroxidasa de Rábano Silvestre , Peróxido de Hidrógeno , Inmunoensayo , PeroxidasaRESUMEN
Catalytic precipitation and subsequent electrochemical oxidation or reduction of a redox-active precipitate has been widely used in electrochemical biosensors. However, such biosensors often do not allow for low detection limits due to a low rate of precipitation, nonspecific precipitation, loose binding of the precipitate to the electrode surface, and insulating behavior of the precipitate within a normal potential window. Here, we report an ultrasensitive electrochemical immunosensor for parathyroid hormone (PTH) detection based on DT-diaphorase (DT-D)-catalyzed formation of an organic precipitate and electrochemical oxidation of the precipitate. In the present study we found that DT-D can be used as a catalytic label in precipitation-based affinity biosensors because DT-D catalyzes fast reduction of 3-(4,-5-dimethylthiazo-2-yl)-2,5-diphenyltetrazolium bromide (MTT) to MTT-formazan precipitate; the MTT reduction does not occur in the absence of DT-D; and a high electrochemical signal is obtained at low potentials during electrodissolution of MTT-formazan precipitate. The immunosensor is fabricated using a silane copolymer-modified ITO electrode surface that is suitable for both efficient and strong adsorption of MTT-formazan precipitate. When the enzymatic MTT-formazan precipitation and subsequent MTT-formazan electrodissolution is applied to a sandwich-type immunosensor, PTH can be detected over a wide range of concentrations with a very low detection limit (â¼1 pg/mL) in artificial serum. The measured concentrations of PTH in clinical serum samples showed high similarity with those obtained using a commercial instrument.
Asunto(s)
Técnicas Biosensibles/métodos , Formazáns/química , NAD(P)H Deshidrogenasa (Quinona)/química , Hormona Paratiroidea/análisis , Sales de Tetrazolio/química , Catálisis , Técnicas Electroquímicas , Electrodos , Humanos , Oxidación-Reducción , Hormona Paratiroidea/sangreRESUMEN
Carboxyl esterases show limited use as catalytic labels in bioassays because of slow enzymatic reaction. We report that DT-diaphorase from Bacillus stearothermophilus (DT-D, EC 1.6.99.-) shows high carboxyl esterase-like activity in the presence of reduced ß-nicotinamide adenine dinucleotide (NADH) and may be used as a better catalytic label than carboxyl esterases. DT-D is a redox enzyme and can participate in signal-amplifying redox cycling. Thus, an electrochemical immunosensor using a DT-D label allows for triple signal amplification based on (i) hydrolysis of a carboxyl ester, (ii) electrochemical-chemical (EC) redox cycling involving an electrode, a hydrolysis product, and NADH, and (iii) electrochemical-enzymatic (EN) redox cycling involving an electrode, a hydrolysis product, DT-D, and NADH. Ester hydrolysis by DT-D is confirmed via spectrophotometric measurement of a chromogenic substrate (4-nitrophenyl acetate) and 1H NMR spectra. Among two phenyl acetates and four naphthyl acetates considered, 4-aminonaphthalene-1-yl acetate (4-NH2-NAc) is chosen as the best acetyl ester substrate because 4-NH2-NAc is stable, its hydrolysis is slow in the absence of DT-D, its hydrolysis is very fast in the presence of DT-D, and EC and EN redox cycling involving the hydrolysis product (4-amino-1-naphthol) is rapid. However, hydrolysis of 4-NH2-NAc by esterase from porcine liver (EC 3.1.1.1.) is very slow. When DT-D is applied to sandwich-type detection of thyroid-stimulating hormone in artificial serum, the detection limit is â¼2 pg/mL, indicating that the developed immunosensor is highly sensitive because of triple signal amplification. DT-D may be used as a catalytic label in sensitive and stable bioassays instead of common alkaline phosphatase and horseradish peroxidase.
Asunto(s)
Técnicas Biosensibles , Técnicas Electroquímicas , Geobacillus stearothermophilus/enzimología , Inmunoensayo , NAD(P)H Deshidrogenasa (Quinona)/metabolismo , Electrodos , Hidrólisis , NAD(P)H Deshidrogenasa (Quinona)/análisis , Oxidación-ReducciónRESUMEN
Enzymatically induced silver deposition and subsequent electrochemical oxidation have been widely used in electrochemical biosensors. However, this method is ineffective for producing highly enhanced silver deposition for use in ultrasensitive detection. Herein, we report a fast silver deposition method that simultaneously uses three signal amplification processes: (i) enzymatic amplification, (ii) chemical-chemical (CC) redox cycling, and (iii) chemical-enzymatic (CN) redox cycling. DT-diaphorase (DT-D) is used for enzymatic amplification to convert a nitroso compound, a species incapable of directly reducing Ag+ to an amine compound, which can directly reduce Ag+. NADH acts as a reducing agent for the indirect reduction of Ag+ via the two redox cycling processes. 4-Nitroso-1-naphthol is converted to 4-amino-1-naphthol (NH2-N) in the presence of DT-D. NH2-N initiates two redox cycling processes: NH2-N, along with Ag+ and NADH, are involved in the CC redox cycling, whereas NH2-N, along with Ag+, DT-D, and NADH, are involved in the CN redox cycling. Finally, the deposited silver is electrochemically oxidized to produce a signal. When this triple signal amplification strategy for fast silver deposition is applied to an electrochemical immunosensor for detecting parathyroid hormone (PTH), a detection limit as low as â¼100 fg/mL is obtained. The concentrations of PTH in clinical serum determined using the developed immunosensor are found to agree with those measured using a commercial instrument. Thus, the use of this strategy for fast silver deposition is highly promising for ultrasensitive electrochemical detection and biosensing applications.
Asunto(s)
Técnicas Electroquímicas/métodos , Inmunoensayo/métodos , Compuestos Nitrosos/química , Hormona Paratiroidea/sangre , Plata/química , 1-Naftilamina/análogos & derivados , Anticuerpos Inmovilizados/inmunología , Proteínas Bacterianas/química , Geobacillus stearothermophilus/enzimología , Humanos , Límite de Detección , NAD(P)H Deshidrogenasa (Quinona)/química , Oxidación-Reducción , Hormona Paratiroidea/inmunologíaRESUMEN
Propagating cascade reactions based on two proteases are promising for obtaining high signal amplification. However, in many cases, biosensors that use cascade reactions do not have low detection limits because of the inherent slowness of proteolytic reactions. Here, we report a sensitive electrochemical immunosensor using a high-signal-amplification method that combines a propagating cascade reaction and a redox cycling reaction. The cascade reaction uses ecarin and prothrombin: the ecarin label proteolytically converts inactive prothrombin into active thrombin, which then proteolytically liberates electroactive p-aminophenol (AP) from an AP-conjugated peptide. The liberated AP is electrochemically oxidized to p-benzoquinone imine (QI), regenerated by the reduction of QI by NADH, and then electrochemically reoxidized. This electrochemical-chemical (EC) redox cycling reaction significantly increases the electrochemical signal. The developed immunosensor is also compared with an immunosensor that uses only a propagating cascade reaction and an immunosensor that uses a single proteolytic reaction and an EC redox cycling reaction. The detection limits for thyroid-stimulating hormone (TSH) obtained using the three immunosensors are 3 pg/mL, 2 ng/mL, and 4 ng/mL, respectively, indicating that the newly developed immunosensor is more sensitive than the other two. The measured concentrations of TSH in clinical serum are found to agree well with those determined using a commercial instrument.
Asunto(s)
Técnicas Biosensibles/métodos , Inmunoensayo/métodos , Límite de Detección , Tirotropina/análisis , Benzoquinonas/química , Electroquímica , Oxidación-ReducciónRESUMEN
BACKGROUND: The DiaPlexQ™ STI6 Detection Kit (DiaPlexQ; Solgent Co., Ltd., Daejeon, South Korea) is a multiplex real-time PCR assay for the detection of the following sexually transmitted disease (STD) pathogens: Chlamydia trachomatis, Neisseria gonorrhoeae, Mycoplasma hominis, Trichomonas vaginalis, Ureaplasma urealyticum, and Mycoplasma genitalium. We compared the performance of the DiaPlexQ assay with the GeneFinder™ STD I (CT/NG/UU) and STD II (MG/MH/TV) Multiplex Real-time PCR Kits (GeneFinder; Infopia Co., Ltd., Anyang, South Korea). METHODS: We evaluated the performance of the DiaPlexQ assay in comparison to that of GeneFinder using 1106 clinical specimens (542 genital swabs and 564 urine samples). The analytical performance of the DiaPlexQ assay, including the limit of detection (LOD) and analytical specificity, was evaluated using reference strains. RESULTS: The positive percent agreement, negative percent agreement, and kappa value between the two assays were 96.6%-99.4%, 98.2%-99.8%, and 0.93%-0.99%, respectively. No cross-reactivity was observed in a collection of 41 different microorganisms and the LOD of the DiaPlexQ assay ranged from 1 to 10 copies/reaction for each microorganism. CONCLUSION: The DiaPlexQ assay showed comparable performance to that of the GeneFinder assay so that it can be used for the screening and diagnosis of non-viral curable STD pathogens.
Asunto(s)
Reacción en Cadena de la Polimerasa Multiplex/normas , Reacción en Cadena en Tiempo Real de la Polimerasa/normas , Enfermedades de Transmisión Sexual/diagnóstico , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , ADN Bacteriano/genética , ADN Protozoario/genética , Femenino , Genitales/microbiología , Genitales/parasitología , Humanos , Masculino , Persona de Mediana Edad , Reacción en Cadena de la Polimerasa Multiplex/métodos , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Reproducibilidad de los Resultados , Enfermedades de Transmisión Sexual/microbiología , Enfermedades de Transmisión Sexual/parasitología , Orina/microbiología , Orina/parasitología , Adulto JovenRESUMEN
Simple and sensitive competitive immunosensors for small molecules are difficult to obtain, especially in serum containing numerous interfering species (ISs) with different concentrations. Herein, we report a washing-free and sensitive (competitive) displacement immunosensor for cortisol in human serum, based on electron mediation of Os(bpy)2Cl2 between an electrode and a redox label [oxygen-insensitive diaphorase (DI)] (i.e., electrochemical-enzymatic redox cycling). The anticortisol IgG-DI conjugate bound to a cortisol-immobilized electrode is displaced by competitive binding of cortisol in serum and diffuses away from the electrode during incubation; therefore, the concentration of the displaced conjugate near the electrode becomes very low, even without washing. Electrochemically interfering ascorbic acid is converted to a redox-inactive species by ascorbate oxidase during incubation. The remaining bound conjugate mainly contributes to electrochemical currents. Compared with ferrocene methanol, Fe(CN)64-, and Ru(NH3)63+, the electrochemical and redox cycling behaviors of Os(bpy)2Cl2 are influenced significantly less by ISs in serum. Comparative studies reveal that washing-free displacement assay shows better cortisol-induced signal change than three other assays. The surface concentration of cortisol immobilized on the electrode is optimized, because the electrochemical signal is highly dependent on the surface concentration. When the washing-free displacement immunosensor is applied for the detection of cortisol in artificial serum, cortisol is measured with a detection limit of â¼30 pM within 12 min. The cortisol concentrations measured in clinical serum samples agree well with those obtained using a commercial instrument. The new immunosensor is highly promising for the simple, sensitive, and rapid point-of-care detection of small molecules.
Asunto(s)
Técnicas Biosensibles/instrumentación , Hidrocortisona/sangre , Técnicas para Inmunoenzimas/instrumentación , Técnicas Electroquímicas/instrumentación , Electrodos , Diseño de Equipo , Geobacillus stearothermophilus/enzimología , Humanos , Inmunoconjugados/química , Límite de Detección , Sistemas de Atención de PuntoRESUMEN
Enzyme-like nanocatalytic reactions developed for high signal amplification in biosensors are of limited use because of their low reaction rates and/or unwanted side reactions in aqueous electrolyte solutions containing dissolved O2. Herein, we report a nitrosoreductase-like catalytic reaction, employing 4-nitroso-1-naphthol, Pd nanoparticles, and H3N-BH3, which affords a high reaction rate and minimal side reactions, enabling its use in ultrasensitive electrochemical biosensors. 4-Nitroso-1-naphthol was chosen after five hydroxy-nitro(so)arene compounds were compared in terms of high signal and low background levels. Importantly, the nanocatalytic reaction occurs without the self-hydrolysis and induction period observed in the nanocatalytic reduction of nitroarenes by NaBH4. The high signal level results from (i) fast nanocatalytic 4-nitroso-1-naphthol reduction, (ii) fast electrochemical redox cycling, and (iii) the low influence of dissolved O2. The low background level results from (i) slow direct reaction between 4-nitroso-1-naphthol and H3N-BH3, (ii) slow electrode-mediated reaction between 4-nitroso-1-naphthol and H3N-BH3, and (iii) slow electrooxidation of H3N-BH3 at electrode. When applied to the detection of parathyroid hormone, the detection limit of the newly developed biosensor was â¼0.3 pg/mL. The nitrosoreductase-like nanocatalytic reaction is highly promising for ultrasensitive and stable biosensing.
Asunto(s)
Nanopartículas del Metal/química , Naftoles/química , Compuestos Nitrosos/química , Hormona Paratiroidea/análisis , Anticuerpos/inmunología , Técnicas Biosensibles/métodos , Catálisis , Técnicas Electroquímicas/métodos , Humanos , Límite de Detección , Oxidación-Reducción , Paladio/química , Hormona Paratiroidea/inmunologíaRESUMEN
The most common enzyme labels in enzyme-linked immunosorbent assays are alkaline phosphatase and horseradish peroxidase, which, however, have some limitations for use in electrochemical immunosensors. This Article reports that the small and thermostable DT-diaphorase (DT-D) and electrochemically inactive 4-nitroso-1-naphthol (4-NO-1-N) can be used as a bifunctional enzyme label and a rapidly reacting substrate, respectively, for electrochemical immunosensors. This enzyme-substrate combination allows high signal amplification via rapid enzymatic amplification and electrochemical redox cycling. DT-D can convert an electrochemically inactive nitroso or nitro compound into an electrochemically active amine compound, which can then be involved in electrochemical-chemical (EC) and electrochemical-enzymatic (EN) redox cycling. Six nitroso and nitro compounds are tested in terms of signal-to-background ratio. Among them, 4-NO-1-N exhibits the highest signal-to-background ratio. The electrochemical immunosensor using DT-D and 4-NO-1-N detects parathyroid hormone (PTH) in phosphate-buffered saline containing bovine serum albumin over a wide range of concentrations with a low detection limit of 2 pg/mL. When the PTH concentration in clinical serum samples is measured using the developed immunosensor, the calculated concentrations are in good agreement with the concentrations obtained using a commercial instrument. Thus, the use of DT-D as an enzyme label is highly promising for sensitive electrochemical detection and point-of-care testing.
Asunto(s)
Técnicas Biosensibles/métodos , Técnicas Electroquímicas , NAD(P)H Deshidrogenasa (Quinona)/metabolismo , Hormona Paratiroidea/análisis , Electrodos , Humanos , Inmunoensayo , Límite de Detección , NAD(P)H Deshidrogenasa (Quinona)/química , Naftoles/química , Oxidación-Reducción , Hormona Paratiroidea/sangre , Sistemas de Atención de Punto , Especificidad por SustratoRESUMEN
The bacterial flagellar hook is a tubular helical structure made by the polymerization of multiple copies of a protein, FlgE. Here we report the structure of the hook from Campylobacter jejuni by cryo-electron microscopy at a resolution of 3.5 Å. On the basis of this structure, we show that the hook is stabilized by intricate inter-molecular interactions between FlgE molecules. Extra domains in FlgE, found only in Campylobacter and in related bacteria, bring more stability and robustness to the hook. Functional experiments suggest that Campylobacter requires an unusually strong hook to swim without its flagella being torn off. This structure reveals details of the quaternary organization of the hook that consists of 11 protofilaments. Previous study of the flagellar filament of Campylobacter by electron microscopy showed its quaternary structure made of seven protofilaments. Therefore, this study puts in evidence the difference between the quaternary structures of a bacterial filament and its hook.