RESUMEN
The number concentrations of air UFBs were controlled, approximately, by adjusting the generation time. UFB waters, ranging from 1.4 × 108 mL-1 to 1.0 × 109 mL-1, were prepared. Barley seeds were submerged in beakers filled with distilled water and UFB water in a ratio of 10 mL of water per seed. The experimental observations of seed germination clarified the role of UFB number concentrations; that is, a higher number concentration induced earlier seed germination. In addition, excessively high UFB number concentrations caused suppression of seed germination. A possible reason for the positive or negative effects of UFBs on seed germination could be ROS generation (hydroxyl radicals and âOH, OH radicals) in UFB water. This was supported by the detection of ESR spectra of the CYPMPO-OH adduct in O2 UFB water. However, the question still remains: how can OH radicals be generated in O2 UFB water?
RESUMEN
The synthesis of polycyclic aromatic compounds generally requires stoichiometric oxidants or homogeneous metal catalysts, however, the risk of contamination of inorganic residues can affect their properties. Here we present a microwave (MW)-assisted platinum on beaded activated carbon (Pt/CB)-catalyzed C-C bond formation of diarylacetylenes and aromatic hydrocarbons under continuous-flow conditions. Various fused aromatic compounds were continuously synthesized via dehydrogenative C(sp2)-C(sp2) and C(sp2)-C(sp3) bond formation with yields of up to 87% without the use of oxidants and bases. An activated, local reaction site on Pt/CB in the flow reaction channel reaching temperatures of more than three hundred degrees Celsius was generated in the catalyst cartridge by selective microwave absorption in CB with an absorption efficiency of > 90%. Mechanistic experiments of the transformation reaction indicated that a constant hydrogen gas supply was essential for activating Pt. This is an ideal reaction with minimal input energy and no waste production.
RESUMEN
The effectiveness of a simulated microgravity environment as a novel method for preserving the freshness of vegetables was investigated. Three types of vegetables were selected: vegetable soybean, mung bean sprouts, and white radish sprouts. These selected vegetables were fixed on a three-dimensional rotary gravity controller, rotated slowly. The selected vegetables were stored at 25°C and 66% of relative humidity for 9, 6, or 5 d while undergoing this process. The simulated microgravity was controlled utilizing a gravity controller around 0 m s-2. The mung bean sprouts stored for 6 d under simulated microgravity conditions maintained higher thickness levels than the vegetable samples stored under normal gravity conditions (9.8 m s-2) for the same duration. The mass of all three items decreased with time without regard to the gravity environment, though the samples stored within the simulated microgravity environment displayed significant mass retention on and after 3 d for mung bean sprout samples and 1 d for white radish sprout samples. In contrast, the mass retention effect was not observed in the vegetable soybean samples. Hence, it was confirmed that the mass retention effect of microgravity was limited to sprout vegetables. As a result of analysis harnessing a mathematical model, assuming that the majority of the mass loss is due to moisture loss, a significant difference in mass reduction coefficient occurs among mung bean sprouts and white radish sprouts due to the microgravity environment, and the mass retention effect of simulated microgravity is quantitatively evaluated utilizing mathematical models. Simulated microgravity, which varies significantly from conventional refrigeration, ethylene control, and modified atmosphere, was demonstrated effective as a novel method for preserving and maintaining the freshness of sprout vegetables. This founding will support long-term space flight missions by prolonging shelf life of sprout vegetables.
Asunto(s)
Conservación de Alimentos/métodos , Almacenamiento de Alimentos/métodos , Verduras/metabolismo , Ingravidez , Recuento de Colonia Microbiana/métodos , Microbiología de Alimentos/métodos , Germinación/fisiología , Simulación de Ingravidez/métodosRESUMEN
Controlled atmosphere (CA) storage, that is, at low O2 and high CO2 concentrations, effectively extends the shelf life of horticultural products. The influence of CA storage (O2/CO2: 2.5%/6.0% or 2.5%/0.0%) and in normal air (both at 1 °C for 21 d) on the physicochemical (O2 uptake, mass loss and L-ascorbate) and biological properties of broccoli (Brassica oleracea var. italica, Plenck, 1794) via amounts and activities of terminal oxidases of the electron transport chain was investigated. Mass loss, a sensitive index of freshness for broccoli heads under CA, was significantly lower under CA than under normoxia (p < 0.05). Mass loss was depressed 7 d earlier under CA, including 6.0% CO2 than under CA without CO2. High CO2 effectively depressed the degradation of L-ascorbate. During storage, the activity of the alternative oxidase (AOX) was lower under CA than in normal air (p < 0.05), while the amount of cytochrome c oxidase (COX), and the AOX/COX activity ratio (based on oxygen isotope discrimination), were not affected during storage. Our results indicate that CA storage effectively retained the freshness of broccoli heads by depressing the induction of AOX. However, depression of AOX amount was not associated with CO2 around broccoli heads.
RESUMEN
The palladium-on-carbon (Pd/C)-catalyzed hydrogenative deprotection of the N-benzyl-protecting group was effectively facilitated by the combined use of niobic acid-on-carbon (Nb2O5/C). Nb2O5/C is an acidic heterogeneous catalyst prepared from NbCl5 and activated carbon. The catalysts were easily removed from the reaction mixture and reusable. Deprotected amines were obtained in excellent yields without an additional neutralization process. The facilitating effect of Nb2O5/C was also observed during the Pd/C-catalyzed hydrogenative deprotection of the N-benzyloxycarbonyl (Cbz) and O-benzyl groups.
RESUMEN
Influence of atmosphere and storage period on the physicochemical and biological properties of harvested vegetable soybeans stored for 10 d at 25 °C was investigated. Storing vegetable soybeans under modified atmosphere (low O2 and high CO2), was more effective in maintaining its green color and mass than storing them under normoxia. Principal component 1 (PC1; contribution rate: 25%) was related to the atmospheres, whereas PC2 (contribution rate: 19%) was related to storage period. Cluster analysis showed that some types of sugars decreased, whereas some types of organic and amino acids increased with deterioration. Alanine, an indicator of low O2 stress, was maintained for 3 d under modified atmospheres, whereas alanine significantly decreased under normoxia. The concentrations of inositol and niacinamide (functional ingredients) under the modified atmospheres were significantly higher than those under normoxia. Thus, storage under modified atmospheres was effective in maintaining freshness and increasing the nutritional content of vegetable soybeans.
Asunto(s)
Dióxido de Carbono/análisis , Embalaje de Alimentos , Almacenamiento de Alimentos , Glycine max/química , Oxígeno/análisis , Verduras/química , Alanina/análisis , Atmósfera , Análisis por Conglomerados , Color , Inositol/análisis , Metabolómica , Micronutrientes/análisis , Análisis Multivariante , Niacinamida/análisis , Semillas/química , Factores de TiempoRESUMEN
Catalytic arene reduction was effectively realized by heating in 2-propanol/water in the presence of Pt on carbon (Pt/C) and metallic Fe. 2-Propanol acted as a hydrogen source, obviating the need for flammable (and hence, dangerous and hard-to-handle) hydrogen gas, while metallic Fe acted as an essential co-catalyst to promote reduction. The chemical states of Pt and Fe in the reaction mixture were determined by X-ray absorption near-edge structure analysis, and the obtained results were used to suggest a plausible reaction mechanism, implying that catalytic reduction involved Pt- and Fe-mediated single-electron transfer and the dehydrogenation of 2-propanol.
RESUMEN
A hyperspectral imaging (HSI) system (380-1000â¯nm) was investigated for non-invasively estimating adenosine triphosphate (ATP) content in ready-to-eat sausages during 5â¯days storage at 35⯰C. A set of pretreated combinations were carried out on preprocessing the spectra to improve the performance of partial least squares regression (PLSR). According to the regression coefficient values, ten important wavelengths (385, 390, 395, 505, 580, 670, 745, 780, 855, and 955â¯nm) were selected in this study. PLSR models developed using full wavelengths and optimal wavelengths showed the prediction coefficient of determination (rp2) up to 0.8324 and 0.8606, respectively. The concentration and location of the ATP content in sausages were for the first time displayed via chemical imaging developed by R statistics. Combining HSI and multivariate analysis can quantify and visualize ATP dynamic changes during storage and a great potential in the processed meat industry for real-time inspection.
Asunto(s)
Adenosina Trifosfato/análisis , Productos de la Carne/análisis , Análisis de los Mínimos Cuadrados , Mediciones Luminiscentes , Espectrofotometría , Factores de TiempoRESUMEN
BACKGROUND: Redness can greatly influence the freshness of sausages. A precise, rapid and noncontact analytical method or tool is needed to quantify the color. Hyperspectral imaging (HSI) is an emerging technique that integrates spectroscopy and imaging to obtain the spectral and spatial information simultaneously. In the present study, the redness of cooked sausages stored up to 57 days was predicted using HSI in tandem with multivariate data analysis. The mean spectra of the sausages were extracted from the hyperspectral images. Partial least squares regression (PLSR) and forward stepwise multiple regression (FSMR) models were used to develop the relavent spectral profiles with the redness of the cooked sausages. RESULTS: Ten important wavelengths were selected based on the regression coefficient values from the PLSR model. The PLSR model established using the full wavelengths presented a good performance, with Rc of 0.934 and a root mean square error of calibration of 0.642 (redness ranged between 14.99 and 21.48). The prediction maps for demonstrating evolution of redness in sausages were developed for the first time using R statistics (R Foundation for Statistical Computing) and Matlab (MathWorks Inc., Natick, MA, USA). CONCLUSION: HSI combined with PLSR and FSMR can be used to quantify and visualize evolution of sausage redness under different storage days. © 2017 Society of Chemical Industry.
Asunto(s)
Productos de la Carne/análisis , Espectroscopía Infrarroja Corta/métodos , Animales , Culinaria , Almacenamiento de Alimentos , Japón , Análisis de los Mínimos Cuadrados , Análisis Multivariante , Control de Calidad , PorcinosRESUMEN
The potential of hyperspectral imaging with wavelengths of 380 to 1000 nm was used to determine the pH of cooked sausages after different storage conditions (4 °C for 1 d, 35 °C for 1, 3, and 5 d). The mean spectra of the sausages were extracted from the hyperspectral images and partial least squares regression (PLSR) model was developed to relate spectral profiles with the pH of the cooked sausages. Eleven important wavelengths were selected based on the regression coefficient values. The PLSR model established using the optimal wavelengths showed good precision being the prediction coefficient of determination (Rp2 ) 0.909 and the root mean square error of prediction 0.035. The prediction map for illustrating pH indices in sausages was for the first time developed by R statistics. The overall results suggested that hyperspectral imaging combined with PLSR and R statistics are capable to quantify and visualize the sausages pH evolution under different storage conditions. PRACTICAL APPLICATION: In this paper, hyperspectral imaging is for the first time used to detect pH in cooked sausages using R statistics, which provides another useful information for the researchers who do not have the access to Matlab. Eleven optimal wavelengths were successfully selected, which were used for simplifying the PLSR model established based on the full wavelengths. This simplified model achieved a high Rp2 (0.909) and a low root mean square error of prediction (0.035), which can be useful for the design of multispectral imaging systems.
Asunto(s)
Conservación de Alimentos/métodos , Productos de la Carne/análisis , Espectroscopía Infrarroja Corta/métodos , Animales , Manipulación de Alimentos/métodos , Concentración de Iones de Hidrógeno , Procesamiento de Imagen Asistido por Computador , Japón , Análisis de los Mínimos Cuadrados , Modelos TeóricosRESUMEN
BACKGROUND: Sensory analysis is an important standard for evaluating food products. However, as trained panelists and time are required for the process, the potential of using fluorescence fingerprint as a rapid instrumental method to approximate sensory characteristics was explored in this study. RESULTS: Thirty-five out of 44 descriptive sensory attributes were found to show a significant difference between samples (analysis of variance test). Principal component analysis revealed that principal component 1 could capture 73.84 and 75.28% variance for aroma category and combined flavor and taste category respectively. Fluorescence fingerprints of tomato juices consisted of two visible peaks at excitation/emission wavelengths of 290/350 and 315/425 nm and a long narrow emission peak at 680 nm. The 680 nm peak was only clearly observed in juices obtained from tomatoes cultivated to be eaten raw. The ability to predict overall sensory profiles was investigated by using principal component 1 as a regression target. Fluorescence fingerprint could predict principal component 1 of both aroma and combined flavor and taste with a coefficient of determination above 0.8. CONCLUSION: The results obtained in this study indicate the potential of using fluorescence fingerprint as an instrumental method for assessing sensory characteristics of tomato juices.
Asunto(s)
Bebidas/análisis , Odorantes , Fitoterapia , Solanum lycopersicum , Gusto , Compuestos Orgánicos Volátiles/química , Fluorescencia , Calidad de los Alimentos , HumanosRESUMEN
Quantitative determination by fluorescence spectroscopy is possible because of the linear relationship between the intensity of emitted fluorescence and the fluorophore concentration. However, concentration quenching may cause the relationship to become nonlinear, and thus, the optimal dilution ratio has to be determined. In the case of fluorescence fingerprint (FF) measurement, fluorescence is measured under multiple wavelength conditions and a method of determining the optimal dilution ratio for multivariate data such as FFs has not been reported. In this study, the FFs of mixed solutions of tryptophan and epicatechin of different concentrations and composition ratios were measured. Principal component analysis was applied, and the resulting loading plots were found to contain useful information about each constituent. The optimal concentration ranges could be determined by identifying the linear region of the PC score plotted against total concentration.
Asunto(s)
Catequina/química , Espectrometría de Fluorescencia/estadística & datos numéricos , Triptófano/química , Fluorescencia , Análisis de los Alimentos , Análisis Multivariante , Análisis de Componente Principal , Soluciones , Espectrometría de Fluorescencia/normasRESUMEN
We report changes of turn-on voltage in InAs-Si heterojunction steep subthreshold-slope transistors by the Zn-pulsed doping technique for InAs nanowire channels. The doping of the nanowire channel moderately changes turn-on voltage from negative to positive voltage, while keeping a steep subthreshold-slope of 30 mV/decade under reverse bias direction. The formation of pseudointrinsic InAs segment is found to be important to make a normally off transistor with a steep subthreshold slope.
Asunto(s)
Arsenicales/química , Indio/química , Nanotecnología , Nanocables/química , Silicio/química , Propiedades de Superficie , ZincRESUMEN
A novel method of optically reducing the dimensionality of an excitation-emission matrix (EEM) by optimizing the excitation and emission band-pass filters was proposed and applied to the visualization of viable bacteria on pork. Filters were designed theoretically using an EEM data set for evaluating colony-forming units on pork samples assuming signal-to-noise ratios of 100, 316, or 1000. These filters were evaluated using newly measured EEM images. The filters designed for S/N = 100 performed the best and allowed the visualization of viable bacteria distributions. The proposed method is expected to be a breakthrough in the application of EEM imaging.
Asunto(s)
Bacterias/aislamiento & purificación , Análisis de los Alimentos/métodos , Contaminación de Alimentos/análisis , Microbiología de Alimentos/métodos , Carne/microbiología , Microscopía Fluorescente/métodos , Espectrometría de Fluorescencia/métodos , Animales , PorcinosRESUMEN
Silicon transistors are expected to have new gate architectures, channel materials and switching mechanisms in ten years' time. The trend in transistor scaling has already led to a change in gate structure from two dimensions to three, used in fin field-effect transistors, to avoid problems inherent in miniaturization such as high off-state leakage current and the short-channel effect. At present, planar and fin architectures using III-V materials, specifically InGaAs, are being explored as alternative fast channels on silicon because of their high electron mobility and high-quality interface with gate dielectrics. The idea of surrounding-gate transistors, in which the gate is wrapped around a nanowire channel to provide the best possible electrostatic gate control, using InGaAs channels on silicon, however, has been less well investigated because of difficulties in integrating free-standing InGaAs nanostructures on silicon. Here we report the position-controlled growth of vertical InGaAs nanowires on silicon without any buffering technique and demonstrate surrounding-gate transistors using InGaAs nanowires and InGaAs/InP/InAlAs/InGaAs core-multishell nanowires as channels. Surrounding-gate transistors using core-multishell nanowire channels with a six-sided, high-electron-mobility transistor structure greatly enhance the on-state current and transconductance while keeping good gate controllability. These devices provide a route to making vertically oriented transistors for the next generation of field-effect transistors and may be useful as building blocks for wireless networks on silicon platforms.
RESUMEN
We demonstrate position-controlled III-V semiconductor nanowires (NWs) by using selective-area metal-organic vapor phase epitaxy and their application to solar cells. Efficiency of 4.23% is achieved for InP core-shell NW solar cells. We form a 'flexible NW array' without a substrate, which has the advantage of saving natural resources over conventional thin film photovoltaic devices. Four junction NW solar cells with over 50% efficiency are proposed and discussed.