Differential pulse anodic voltammetric determination of tiapride hydrochloride in pharmaceutical preparation and human urine using carbon paste electrodes.

The anodic voltammetric behavior of tiapride hydrochloride (TiapCl) was studied at carbon paste electrodes in 0.04 M Britton-Robinson buffer pH 7.0 using cyclic and differential pulse voltammetric techniques. The oxidation of TiapCl is an irreversible diffusion-controlled process. A differential pulse anodic voltammetric procedure has been developed for determination of the drug over the concentration range 0.36 - 19.35 µg/ml with detection and quantification limits of 0.12 and 0.40 µg/ml, respectively. The proposed method was successfully applied for the determination of the drug in commercial tablets and in spiked human urine samples.

Sibutramine selective electrodes for batch and flow injection determinations in pharmaceutical preparations.

The construction and electrochemical response characteristics of two new polyvinyl chloride (PVC) membrane sensors for the determination of sibutramine hydrochloride were described. The sensors are based on the ion association complexes of sibutramine with sodium tetraphenylborate (NaTPB) or phosphotungstic acid (PTA) using dibutyl phthalate as plasticizing solvent. The sensors display a fast, stable response over the concentration range 3.84 x 10(-5)-1.00 x 10(-2) M sibutramine hydrochloride monohydrate (SibuCl), with cationic slopes of 57.7 +/- 0.57 and 59.7 +/- 1.79 mV concentration decade(-1) and detection limits of 8.91 x 10(-6) and 1.47 x 10(-5) M in case of sibutramine-tetraphenylborate (Sibu-TPB) and sibutramine-phosphotungstate ((Sibu)(3)-PT), respectively. The proposed sensors have been successfully applied for the determination of sibutramine hydrochloride in Regitrim capsules in batch and flow injection (FI) conditions.

Cathodic adsorptive stripping voltammetry of drotaverine hydrochloride and its determination in tablets and human urine by differential pulse voltammetry.

The stripping voltammetric behaviour of drotaverine hydrochloride (DvCl) was studied using a hanging mercury drop electrode (HMDE). The adsorptive stripping response has been evaluated with respect to pH, accumulation time, accumulation potential, scan rate and other variables. Differential pulse DP mode; over the potential range -400 to -1200 mV, is used in the presence of 0.04 M Britton-Robinson buffer pH 2. Cyclic voltammetric study indicates that the reduction process is irreversible and controlled by adsorption. The response of DP technique is linear over the concentration range 21.70-257.34 ng/ml. Limit of detection and limit of quantification were 3.15 and 10.50 ng/ml, respectively. The proposed method was successfully applied for the determination of the drug in commercial tablets and spiked human urine samples.

Flow injection potentiometric determination of clobutinol hydrochloride.

New clobutinol (Clob) ion-selective polyvinyl chloride (PVC) membrane electrodes, based on the ion-associates of Clob with phosphotungstic acid or phosphomolybdic acid were prepared using dibutyl phthalate as plasticizing solvent. The electrodes were characterized in terms of membrane composition, temperature and pH. The sensors showed a near-Nernstian response over the concentration ranges (6.31 x 10(-6))-(1.00 x 10(-2)) and (5.01 x 10(-5))-(1.00 x 10(-2))M in the case of clobutinol-phosphotungstate ((Clob)(3)-PT) applying batch and flow injection (FI) analysis, respectively, and (1.58 x 10(-5))-(1.00 x 10(-2)) and (5.01 x 10(-5))-(1.00 x 10(-2))M in case of clobutinol-phosphomolybdate ((Clob)(3)-PM) for batch and FI analysis systems, respectively. The electrodes were successfully applied for the potentiometric determination of ClobCl in pharmaceutical preparation and urine in steady state and flow injection conditions. The electrodes exhibit good selectivity for Clob with respect to a large number of inorganic cations, sugars and amino acids.

Simultaneous determination of mebeverine hydrochloride and sulpiride using the first derivatives of ratio spectra and chemometric methods.

Two methods are described for the simultaneous determination of mebeverine hydrochloride (MB) and sulpiride (SU) in their combinations. The first method depends on the first derivative of the ratio spectra by measurement of the amplitudes at 263.7 and 234.9 nm for MB and SU, respectively. The linear ranges and detection limits are 4.0-40.0 and 0.72 microg/ml for MB and 1.0-10.0 and 0.34 microg/ml for SU. In the second case, a chemometric (classical least squares) method was developed. The concentration data matrices were obtained by using different concentrations of pure drugs in 0.1 M HCl. The absorbance data matrix corresponding to each concentration data matrix was obtained by the measurements of absorbances in the range 200-300 nm in their zero order spectra; then calibration was obtained by using the absorbance data matrix and the concentration data matrix for the prediction of the unknown concentrations of MB and SU in their mixture. The numerical values were calculated by using Matlab R12 version 6.0 and Origin 5.0 software. The procedures do not require any separation steps. These two methods were successfully applied for assaying the pharmaceutical formulation, of Colona tablets.

Adsorptive stripping voltammetric determination of triprolidine hydrochloride in pharmaceutical tablets.

The electrochemical behavior of antihistaminic drug, viz. triprolidine hydrochloride (TripCl), at a hanging mercury drop electrode (HMDE) is investigated. Chemical and electrical parameters affecting the adsorptive voltammetric measurements are optimized. Different modes of sweep, viz. direct current DC, normal pulse NP, differential pulse DP and square wave SW modes, over the potential range from -800 to -1400 mV, are used in the presence of 0.04 M Britton-Robinson buffer pH 11, with accumulation time 30 s, scan rate 50 mV/s and pulse amplitude 50 mV. The reduction process is irreversible and involved the transfer of two electrons and two protons. Their responses are linear over the concentration range 15-157 ng/ml with average correlation coefficient 0.9998, while the detection limit is 2.64, 6.24, 8.80 and 2.12 ng/ml for DC, DP, SW and NP mode, respectively. The differential pulse method has been applied successfully for the determination of the drug in Egyptian pharmaceutical preparation with mean recovery 99.55+/-0.67%.

Adsorptive stripping voltammetric determination of ambroxol.

An electrochemical procedure for the determination of ambroxol in mucolytics was described. The method was based on adsorptive accumulation of the species at the hanging mercury drop electrode (HMDE), followed by one of different modes of stripping sweep, viz. direct current tast (DCT), differential pulse (DP), square wave (SW) and first harmonic alternating current (AC1). The behaviour of adsorptive stripping response was studied under various experimental conditions, e.g. type of supporting electrolyte, pH, accumulation time, pulse amplitude, scan rate and mode of sweep. In Britton-Robinson buffer solution, an irreversible reduction process involving transfer of one electron and one proton was took place. The response was linear over the 0.2-6 microg/ml concentration range. Determination of the compound in oral dosage forms was achieved using the standard addition method. The average of determinations obtained by the squarewave adsorptive voltammetric method with its relative standard deviation was 99.8 +/- 2.40%.

New plastic membrane and carbon paste ion selective electrodes for the determination of triprolidine.

Triprolidine (Trip) ion selective electrodes of three types: the conventional polymer membrane (I), graphite coated electrode (II) and carbon paste electrode (III), have been prepared, based on the ion pair of triprolidine hydrochloride with sodium tetraphenylborate. The electrodes exhibit a linear response with a mean calibration graph slope of 56.12, 55.00 and 54.32 mV decade(-1) at 25 degrees C for I, II and III, respectively, within the concentration ranges 1.96 x 10(-5) - 1.00 x 10(-2) M for I and 3.84 x 10(-5) - 1.00 x 10(-2) M for II and III. The detection limits are 1.13+/-0.13 x 10(-5), 1.70+/-0.06 x 10(-5) and 1.78+/-0.05 x 10(-5) M for the three electrodes, respectively. The change of pH within the ranges 4.85 - 8.75 and 4.70 - 8.50 for I and III, respectively, did not affect the electrode performance. The standard electrode potentials were determined at different temperatures and were used to calculate the isothermal coefficient of the electrode. The electrodes showed a very good selectivity for Trip with respect to a large number of inorganic cations and compounds. The standard addition method was applied to the determination of TripCl in pure solution, pharmaceutical preparations, and urine samples.

Construction and analytical applications of plastic membrane electrode for oxymetazoline hydrochloride.

A new oxymetazoline (OM) ion-selective PVC membrane electrode based on the ion associate of OM with phosphotungstic acid was prepared. The electrode exhibits a linear response with a mean calibration graph slope of 57.16 mV decade(-1) at 25 degrees C within the concentration range of 1.96 x 10(-5) - 1 x 10(-2) M OMCl. The change in the pH within the range of 1.0 - 9.4 did not affect the electrode performance. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode (-0.001233 V). The electrode showed a very good selectivity for OM with respect to a large number of inorganic cations and compounds. The standard addition method and potentiometric titration were applied to the determination of (OM) with RSD not exceeding 1.19%.