RESUMEN
Objective: This study aims to assess the risk of neonatal susceptibility to COVID-19 among pregnant women. Methods: We conducted a retrospective cohort study involving 1089 pregnant women ≥28 weeks of gestational age, who were categorized into infected and uninfected groups. Data for all participants were collected through a comprehensive review of electronic medical records and follow-up phone calls. The primary outcome was neonatal infection with SARS-CoV-2, while secondary outcomes included delivery patterns and gestational age at delivery. Results: Maternal vaccination (OR 95%CI:0.63[0.46, 0.85]) and maternal infection with SARS-CoV-2 (OR 95%CI: 0.45[0.34, 0.60]) were found to be associated with a decreased risk of neonatal infection. The infected group exhibited a lower neonatal SARS-CoV-2 infection rate (25.93%) compared to the uninfected group (45.15%). Logistic regression analysis identified several risk factors associated with an increased risk of neonatal infection, including pregnancy BMI (OR 95%CI: 1.04[1.01, 1.08]), age at first pregnancy (OR 95%CI: 1.05[1.01, 1.10]), age at menarche (OR 95%CI: 1.13[1.02, 1.26]), and parturition (Yes vs. No) (OR 95%CI:1.4 [1.04,1.88]). Conclusion: Maternal vaccination and perinatal infection with SARS-CoV-2 play a protective role in preventing neonatal SARS-CoV-2 infection.
RESUMEN
OBJECTIVES: This study aims to evaluate the efficacy of multi-model incorporated by radiomics, deep learning, and transcriptomics features for predicting pathological grade and survival in patients with clear cell renal cell carcinoma (ccRCC). METHODS: In this study, data were collected from 177 ccRCC patients, including radiomics features, deep learning (DL) features, and RNA sequencing data. Diagnostic models were then created using these data through least absolute shrinkage and selection operator (LASSO) analysis. Additionally, a multi-model was developed by combining radiomics, DL, and transcriptomics features. The prognostic performance of the multi-model was evaluated based on progression-free survival (PFS) and overall survival (OS) outcomes, assessed using Harrell's concordance index (C-index). Furthermore, we conducted an analysis to investigate the relationship between the multi-model and immune cell infiltration. RESULTS: The multi-model demonstrated favorable performance in discriminating pathological grade, with area under the ROC curve (AUC) values of 0.946 (95% CI: 0.912-0.980) and 0.864 (95% CI: 0.734-0.994) in the training and testing cohorts, respectively. Additionally, it exhibited statistically significant prognostic performance for predicting PFS and OS. Furthermore, the high-grade group displayed a higher abundance of immune cells compared to the low-grade group. CONCLUSIONS: The multi-model incorporated radiomics, DL, and transcriptomics features demonstrated promising performance in predicting pathological grade and prognosis in patients with ccRCC. CRITICAL RELEVANCE STATEMENT: We developed a multi-model to predict the grade and survival in clear cell renal cell carcinoma and explored the molecular biological significance of the multi-model of different histological grades. KEY POINTS: 1. The multi-model achieved an AUC of 0.864 for assessing pathological grade. 2. The multi-model exhibited an association with survival in ccRCC patients. 3. The high-grade group demonstrated a greater abundance of immune cells.
RESUMEN
BACKGROUND: The study aims were to analyze pregnancy outcomes after the use of emergency cerclage in patients with different BMIs. METHODS: A total of 76 singleton pregnant patients who underwent emergency cerclage at a tertiary comprehensive hospital in China between Jan 2017 and Dec 2021 were retrospectively divided into an obesity group of 37 patients with BMIs ≥ 28 kg/m2 and a non-obesity group of 39 patients with BMIs < 28 kg/m2. The medical records of patients were reviewed and all relevant clinical data were further collected into an itemized data spreadsheet for various analyses. RESULTS: Emergent cerclage, along with amnioreduction if needed, could be safely performed on both obese and non-obese pregnant women with a dilated external cervix (> 1 cm), which effectively prolonged the gestational week up to ≥ 25 weeks. Obese gravidae had shorter suture-to-delivery intervals and mean pregnancy lengths but more spontaneous preterm births before 37 weeks, and a lower live birth rate (P < 0.05). Logistic regression analysis revealed that BMI, how many times cerclages have been performed during pregnancy (frequency of cerclage) and bacterial vaginosis, aerobic vaginitis and vulvovaginal candidiasis (vaginal microecology) were significantly correlated with fetal loss (P < 0.05), while rank correlation analysis established a negative correlation between BMI values and the suture-to-delivery interval (P = 0.031). CONCLUSIONS: Pregnant cervical insufficiency patients with BMIs > 28 kg/m2 may ill-serve the gestational outcomes and suture-to-delivery interval after their emergent cerclage. Additionally, BMI, frequency of cerclage and vaginal microecology accounted for higher fetal loss in patients who underwent emergency cerclage.
Asunto(s)
Candidiasis Vulvovaginal , Resultado del Embarazo , Embarazo , Recién Nacido , Humanos , Femenino , Índice de Masa Corporal , Resultado del Embarazo/epidemiología , Estudios Retrospectivos , Tasa de Natalidad , Obesidad/complicacionesRESUMEN
Industrialization has resulted in a large number of industrial waste slags being produced, which severely pollute the environment. This urgently needs resourceful treatment. The objective of this paper is to investigate the preparation, performance, and cementation mechanism of a novel geopolymer backfill paste for goaf. We reused diverse industrial waste slags based on low-calcium silica-alumina precursors (two fly ashes FAI, FAII, and red mud RM), high-calcium-based slags (carbide slag CS, soda residue SR, briquette residue slag BRS, and granulated blast furnace slag GBFS), and two additives (gypsum powder GP and lime powder LP). The hardening of backfill pastes was investigated by analyzing the effects of FAI, GBFS, RM, and LP on physical and chemical performance. The cementation mechanism of the prepared backfill paste was revealed through morphology, mineralogy, and chemical products through the use of X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR). The results show that the prepared backfill paste incorporating various solid wastes (FAI, FAII, RM, CS, SR, GBFS, RBS, etc.) yields a 28-d compressive strength of 2.1 MPa (higher than the required value of 0.6 MPa) and a fluidity of 201 mm. Geopolymer gels (N,C)-A-S-H, calcium silicate hydrated C-S-H, and calcium aluminosilicate hydrated C-A-S-H gels serve as chemical cementers, whereas unreacted particles serve as physical filler skeletons. These findings provide an experimental and theoretical basis for the interchangeable use of various identical component solid wastes in backfill engineering materials.
RESUMEN
The presence of pesticide residues in rose makes it necessary to pay special attention to the proper cultivation to consumption. In this study, the inherent regularity of residue behaviors, processing factors and transfer rates of pesticides and potential metabolites during rose planting, drying and brewing was researched. The half-lives in the bud, corolla and leaf were 0.5-2.9, 0.3-1.7 and 2.6-25.9 d, respectively. Residues were more distributed in leaf, followed by corolla, bud and root. Systemic pesticides could appear in the root 1 day after application, and non-systemic pesticides were not detected in the root. The effect of sun and oven drying (80 °C) was more significant in promoting the degradation of cyazofamid, bifenazate, thiamethoxam and imidacloprid. The processing factors (PFs) of other pesticides were > 1. Our results showed that the transfer rate of residues during brewing was negatively correlated exponentially with Log Kow and positively logarithmically correlated with melting point and water solubility. The transfer rate of residues and antioxidant capacity in infusion were significantly affected by different brewing conditions.
Asunto(s)
Residuos de Plaguicidas , Plaguicidas , Plaguicidas/análisis , Residuos de Plaguicidas/análisis , Tiametoxam/metabolismoRESUMEN
The adsorption capacity of intrinsic SnS2 to NH3, Cl2 and C2H2 is very weak. However, non-metallic elements B and N have strong chemical activity, which can significantly improve the conductivity and gas sensitivity of SnS2. Based on density functional theory, SnS2 was modified with B and N atoms to analyze its adsorption mechanism and gas sensitivity for NH3, Cl2 and C2H2 gases. The optimal structure, adsorption energy, state density and frontier molecular orbital theory are analyzed, and the results are in good agreement with the experimental results. The results show that the adsorption of gas molecules is exothermic and spontaneous. Only the adsorption of NH3 and Cl2 on B-SnS2 belongs to chemical adsorption, whereas other gas adsorption systems belong to physical adsorption. Moderate adsorption distance, large adsorption energy, charge transfer and frontier molecular orbital analysis show that gas adsorption leads to the change of the conductivity of the modified SnS2 system. The adsorption capacity of B-SnS2 to these gases is Cl2 > NH3 > C2H2. The adsorption capacity of N-SnS2 is NH3 > C2H2 > Cl2. Therefore, according to different conductivity changes, B-SnS2 and N-SnS2 materials can be developed for greenhouse gas detection of gas sensors.
RESUMEN
Detecting the characteristic decomposition products (SO2, SOF2, and HF) of SF6 is an effective way to diagnose the electric discharge in SF6-insulated equipment. Based on first-principles calculations, Au, Ag, and Cu were chosen as the surface modification transition metal to improve the adsorption and gas-sensing properties of MoTe2 monolayer towards SO2, SOF2, and HF gases. The results show that Au, Ag, and Cu atoms tend to be trapped by TH sites on the MoTe2 monolayer, and the binding strength increases in the order of Ag < Au < Cu. In gas adsorption, the moderate adsorption energy provides the basis that the TM-MoTe2 monolayer can be used as gas-sensing material for SO2, SOF2, and HF. The conductivity of the adsorption system changes significantly. The conductivity decreases upon gases adsorption on TM-MoTe2 monolayer, except the conductivity of Ag-MoTe2 monolayer increases after interacting with SOF2 gas.
RESUMEN
An effective method based on LC-MS/MS was established to determine the concentrations of flupyradifurone, difluoroacetic acid, and 6-chloronicotinic acid in pepper. On the basis of this method, the dissipation, processing factor, and dietary risk of flupyradifurone in pepper were investigated. The results show that the half-life of flupyradifurone in peppers was 2.6-3.8 days. The terminal residual concentration of flupyradifurone in the supervised trials was not higher than the maximum residue limit (MRL) for pepper in the Codex Alimentarius Commission (CAC) (0.9 mg kg-1 ) with the highest residual values of 0.53 mg kg-1 . The national estimated daily intake of flupyradifurone was 0.00094 mg kg-1 , based on the dietary structure of Chinese consumers and the terminal residues under field conditions. The risk quotient for flupyradifurone was 0.012, which was significantly < 1. The processing factor of flupyradifurone in dried pepper was 10.9-14.2, which indicated that drying increased the residual amounts of flupyradifurone in dried pepper, but the residual concentration was still lower than its MRL of 9 mg kg-1 established by CAC.
Asunto(s)
Residuos de Plaguicidas , Espectrometría de Masas en Tándem , 4-Butirolactona/análogos & derivados , Cromatografía Liquida/métodos , Residuos de Plaguicidas/análisis , Piridinas , Medición de Riesgo , Espectrometría de Masas en Tándem/métodosRESUMEN
The dissipation, conversion and risk assessment of bifenazate and bifenazate-diazene in garlic plant were studied by a modified QuEChERS method coupled with UHPLC-MS/MS for the first time. Bifenazate dissipated rapidly in garlic chive and serpent garlic with the half-lives of 3.0-3.9 days and 6.1-6.9 days, respectively. Bifenazate residue on garlic (<0.01 mg/kg) was significantly lower than the other two matrices in the whole growing period, which meant residues in the above-ground part were not transferred to the garlic. Furthermore, garlic chive had higher residues than serpent garlic due to the differences in morphological characteristics. Bifenazate-diazene was easier to convert to bifenazate, with the conversion rates of 93%, 16% and 32% in garlic, serpent garlic and garlic chive extracts, respectively. Additionally, the dietary intake risk for bifenazate was acceptable with RQchronic < 100% according to the international and national assessments.
Asunto(s)
Carbamatos/análisis , Ajo , Hidrazinas/análisis , Residuos de Plaguicidas/análisis , Análisis de los Alimentos , Ajo/química , Medición de Riesgo , Espectrometría de Masas en TándemRESUMEN
Microembolic signals (MES) of the carotid artery are associated with plaque destabilization and reoccurrence of stroke. Previous studies have focused primarily on the degree of carotid artery stenosis and plaque components, and the relationship between plaque length and microembolic sign has received little attention. We aimed to find the association between carotid plaque length (CPL) and the presence of MES. We conducted a retrospective observational cross-sectional study. A total of 84 acute anterior-circulation ischemic stroke/transient ischemic attack (TIA) patients with carotid artery atherosclerosis were classified into an MES-positive (MES+) group and MES-negative (MES-) group. We measured multiple parameters of carotid plaque size (length, thickness) in each patient and evaluated the relationship between different plaque parameters and occurrence of MES. We found that male, carotid artery stenosis (CAS), CPL, carotid plaque thickness (CPT), and intima-media thickness (IMT) of the carotid artery were each significantly different between two groups (all P < 0.05). The multivariate analysis showed CPL (odds ratio (OR), 1.109; 95% CI, 1.044-1.177; P = 0.001) to be independently associated with the presence of MES. The areas under the ROC curves (AUCs) for CPL for predicting MES were 0.777 (95% CI, 0.640-0.914; P < 0.001). The cutoff value of CPL for predicting MES was 16.7 mm, with a sensitivity of 88.2% and a specificity of 77.6%. We found that CPL was a meaningful independent predictor of MES. Therefore, CPL may be useful for risk stratification of long and nonstenotic plaques in anterior circulation stroke.
Asunto(s)
Estenosis Carotídea/diagnóstico por imagen , Ataque Isquémico Transitorio/epidemiología , Accidente Cerebrovascular Isquémico/epidemiología , Placa Aterosclerótica/diagnóstico por imagen , Anciano , Área Bajo la Curva , Grosor Intima-Media Carotídeo , Estenosis Carotídea/patología , Estudios Transversales , Femenino , Humanos , Incidencia , Masculino , Persona de Mediana Edad , Análisis Multivariante , Placa Aterosclerótica/patología , Estudios Retrospectivos , UltrasonografíaRESUMEN
When the displacement of an object is evaluated using sensor data, its movement back to the starting point can be used to correct the measurement error of the sensor. In medicine, the movements of chest compressions also involve a reciprocating movement back to the starting point. The traditional method of evaluating the effects of chest compression depth (CCD) is to use an acceleration sensor or gyroscope to obtain chest compression movement data; from these data, the displacement value can be calculated and the CCD effect evaluated. However, this evaluation procedure suffers from sensor errors and environmental interference, limiting its applicability. Our objective is to reduce the auxiliary computing devices employed for CCD effectiveness evaluation and improve the accuracy of the evaluation results. To this end, we propose a one-dimensional convolutional neural network (1D-CNN) classification method. First, we use the chest compression evaluation criterion to classify the pre-collected sensor signal data, from which the proposed 1D-CNN model learns classification features. After training, the model is used to classify and evaluate sensor signal data instead of distance measurements; this effectively avoids the influence of pressure occlusion and electromagnetic waves. We collect and label 937 valid CCD results from an emergency care simulator. In addition, the proposed 1D-CNN structure is experimentally evaluated and compared against other CNN models and support vector machines. The results show that after sufficient training, the proposed 1D-CNN model can recognize the CCD results with an accuracy rate of more than 95%. The execution time suggests that the model balances accuracy and hardware requirements and can be embedded in portable devices.
Asunto(s)
Compresión de Datos , Redes Neurales de la Computación , Aceleración , Presión , TóraxRESUMEN
Thermal stability of core-shell structured nanoparticles is of vital importance to their practical applications at elevated temperature. Understanding the evolution of chemical distribution and the crystal structure of core-shell nanostructures with temperature variation at the nanoscale will open the route for practical applications and property enhancement of nanoparticles through proper design of new nanomaterials. In this study, core-shell non-stoichiometric Cu5FeS4 icosahedral nanoparticles were investigated by in situ heating transmission electron microscopy. Compared to the high structural and compositional stability at room temperature, the interdiffusion of Cu and Fe atoms became significant, ending up with disappearance of chemical difference in the core and shell over 300 °C. In contrast, different crystal structures of the core and shell were preserved even after heating at 350 °C, indicating the high structural stability. The inconsistency between chemical composition and crystal structure should be ascribed to the interaction between the intrinsic strain existing in the icosahedrons and various structures of this material system. In other words, the geometrically intrinsic strain of the nano-icosahedrons is helpful to modulate/maintain the core-shell structure. These findings open new opportunities for revealing the thermal stability of core-shell nanostructures for various applications and are helpful for the controllable design of new core-shell nanostructures.
RESUMEN
To systematically explore the effects of the synthesis conditions on the porosity of hyper-cross-linked polymers (HCPs), a series of 9-phenylcarbazole (9-PCz) HCPs (P1-P11) has been made by changing the molar ratio of cross-linker to monomer, the reaction temperature T 1, the used amount of catalyst and the concentration of reactants. Fourier transform infrared spectroscopy was utilized to characterize the structure of the obtained polymers. The TG analysis of the HCPs showed good thermal stability. More importantly, a comparative study on the porosity revealed that: the molar ratio of cross-linker to monomer was the main influence factor of the BET specific surface area. Increasing the reaction temperature T 1 or changing the used amount of catalyst could improve the total pore volume greatly but sacrificed a part of the BET specific surface area. Fortunately changing the concentration of reactants could remedy this situation. Slightly changing the concentration of reactants could simultaneously obtain a high surface area and a high total pore volume. The BET specific surface areas of P3 was up to 769 m2 g-1 with narrow pore size distribution and the CO2 adsorption capacity of P11 was up to 52.4 cm3 g-1 (273 K/1.00 bar).
RESUMEN
(Ag,Sn) co-doped Cu3SbSe4 nanocrystals are obtained via a facile microwave-assisted solvothermal method, and their thermoelectric properties are investigated in the temperature range from 300 K to 623 K. Sn-doping on Sb sites dramatically increases the carrier concentration and thus the electrical conductivity, promoting the thermoelectric power factor. Further alloying with Ag on Cu sites strongly suppresses the lattice thermal conductivity close to the glass limit. Aside from point defect scattering, such reduction in lattice thermal conductivity largely relies on the formation of Cu2-xSe nanoinclusions, which serve as additional scattering centers for phonons. Overall, the sample with the nominal composition of Cu2.8Ag0.2Sb0.95Sn0.05Se4 reaches a minimum lattice thermal conductivity of 0.27 W m-1 K-1 and a maximum zT of 1.18 at 623 K, which is the best result for the Cu3SbSe4-based materials in the same temperature region. Our results demonstrate that the microwave-assisted synthesis method is capable of fabricating Cu based ternary compounds with high thermoelectric performance.
RESUMEN
Correction for 'Breath figure in non-aqueous vapor' by Jianyun Ding et al., Soft Matter, 2013, 9, 506-514.
RESUMEN
A general challenge for preparing organic microporous polymers (MOPs) is to use cheap and sustainable building blocks while retaining the advanced functions. We demonstrate a strategy to massively prepare pitch-based MOPs, which are thermally and chemically stable. A maximum BET surface area of 758 m(2) g(-1) and high gas storage capacity were achieved.
RESUMEN
Multi-length scale porous polymer (MLSPP) films were fabricated using commercially available polystyrene (PS) via static breath figure (BF) process and sequent hypercrosslinking reaction. One level of ordered pores in microscale were introduced using static BF process, and the other level in nanoscale were produced by the sequent Friedel-Crafts hypercrosslinking reaction. The chemical structure of the PS MLSPP film was investigated by Fourier transformation infrared spectrometry and solid state nuclear magnetic resonance, and the morphology of the film was observed with electron microscopes. The MLSPP films showed large specific surface areas and excellent chemical and thermal stabilities, owing to the micropores and the crosslinked chemical structure produced by the Friedel-Crafts reaction. The methodology reported in this paper is a template-free, low cost and general strategy for the preparation of MLSPP films, which has potential applications in the areas of environment and energy.
RESUMEN
In this article, we report the formation of nanoring structures on Fe coated substrate and their application in guiding the growth of carbon nanotube (CNT) patterns with hierarchical structures. The formation of nanorings involves the etching of polystyrene (PS) monolayer colloidal crystals (MCCs) under reactive ion etching (RIE), and the redeposition and cross-linkage of the active degradation products at the contact line between the MCCs and the substrate. After washing out the MCCs, insoluble nanorings with hexagonal order on the substrate are developed. The RIE process can control the morphology of the nanorings, as well as the distribution of the Fe element on the substrate; thus, a continuous Fe layer and separated Fe discs on the substrate are created on substrate after washing, depending on the etching time and the shield of MCCs. The surviving Fe element can work as the catalyst to initiate the in situ growth of aligned CNTs in the following chemical vapor deposition (CVD) process, while the Fe element underneath the nanorings keep its inactivity. Eventually, CNT patterns with hierarchical structures are formed. One level originates from the surviving Fe layer; the other level is templated from the nanoring structures, which cause the blank area in the CNT bundles.
RESUMEN
Both academia and industries have put great efforts into developing non-destructive technologies for the fabrication of polymeric nanoporous materials. Such non-destructive technologies developed with supercritical CO2 (scCO2) and CO2-expanded liquids (CXLs) have been attracting more and more attention because they have been demonstrated to be green and effective media for porous polymer preparation and processing. In this tutorial review, we present several such new technologies with scCO2 and CXLs, which have the capacity to prepare polymeric nanoporous materials with unique morphologies. The fabricated nanoporous polymers have significantly improved the performance of polymeric monoliths and films, and have found wide applications as templates, antireflection coatings, low-k materials, tissue engineering scaffolds and filtration membranes. This tutorial review also introduces the associated characterization methods, including the imaging, scattering and physisorption techniques.