Evolution of the network structure and voltage loss of anode electrode with the polymeric dispersion in PEM water electrolyzer.

Exploring the intrinsic relationship between the network structure and the performance of catalyst layer (CL) by rational design its structure is of paramount importance for proton exchange membrane (PEM) electrolyzers. This study reveals the relative effect of polymeric dispersion evolution on oxygen evolution reaction (OER) performance and cell voltage loss and linked to CL network structure. The results show that although the dispersed particle size of the ionomer and ink increases with increasing the solubility parameter (δ) difference between the mixed solvent and the ionomer, MeOH-cat (ink from MeOH aqueous solution) has the largest ionomer and ink particle size resulting in the poorest stability, but has comparable OER overpotential to that of IPA-cat (249 mV@10 mA cm-2), which has the smallest dispersed size. While at 100 mA cm-2, the overpotential of the ink rises as the particle size increases, suggesting that the electrode structure becomes more influential as the current density increases. Quantitatively analyzed the electrolyzers' voltage losses and determined that the CL from MeOH-cat has the lowest kinetic overpotential. However, its performance is the worst because of the insufficient network structure of CL, resulting in an output of 1.96 V at 1.5 A cm-2. Comparatively, the CL from IPA-cat has the highest kinetic overpotential yet can achieve the greatest performance of 1.76 V at 2 A cm-2 due to its homogeneous network structure and optimal mass transport. Furthermore, the performance variation becomes more pronounced as current density rises. Hence, this study highlights the significant impact of CL structure on electrolyzer's performance. To improve performance in PEM water electrolysis technology, especially for large work current density, it is crucial to enhance the CL's network structure.

Texture Analysis of Chinese Dried Noodles during Drying Based on Acoustic-Mechanical Detection Methods.

To better understand the textural transformation of Chinese dried noodles during the drying process, a convenient acoustic-force detection method was established. By comparing the breaking point, it was possible to determine the time-scale correlation between the force-displacement curves and acoustic spectrograms. The acoustic eigenvalues showed a consistent upward trend with the mechanical parameters during the drying process. With a wave crest reaching 152.8 dB and a signal maximum reaching 0.072, the structural stability of the dried noodles hardly induces a higher acoustic response. This suggests that the mechanical strength and rigidity of the dried noodles undergo minimal changes during this period. In comparison to the mechanical parameters, the acoustic eigenvalues accurately describe the changes in texture of dried noodles under various drying conditions, moreover, the sound threshold also provides a more effective response to the dried noodles' structural strength threshold. Therefore, the acoustic detection method can be applied to assist the conventional mechanical measurement in the field of the texture evaluation of dried food.

Construction of catalyst layer network structure for proton exchange membrane fuel cell derived from polymeric dispersion.

A rational design of the structure of catalyst layer (CL) is required for proton exchange membrane fuel cells to attain outstanding performance and excellent stability. It is crucial to have a profound comprehension of the correlations existing between the properties (catalyst ink), network structures of CL and proton exchange membrane fuel cells' performance for the rational design of the structure of CL. This study deeply investigates the effects of a series of alcohol solvents on the properties and network structure of CL. The results demonstrate that the CL aggregates in higher ε solution show smaller particle sizes, and the sulfonic acid groups (∼SO3H) tend to extend more outward due to the strong dissociation. A more continuous and homogeneous ionomer distribution around Pt/C aggregates is observed in the CL, which improves the electrochemically active surface area (ECSA) and performance of the electrode. But, the electrode has a poor performance at high current density regions due to the mass transfer resistance. Based on this, a two-step solvent control strategy is proposed to maintain uniform ionomer and aggerates distribution and optimize the mass transfer for CL. The performance of the cell improves from 0.555 V to 0.615 V at 2000 mA·cm-2.

Pt Atomic Layers with Tensile Strain and Rich Defects Boost Ethanol Electrooxidation.

Surface and strain engineering are two effective strategies to improve performance; however, synergetic controls of surface and strain effects remains a grand challenge. Herein, we report a highly efficient and stable electrocatalyst with defect-rich Pt atomic layers coating an ordered Pt3Sn intermetallic core. Pt atomic layers enable the generation of 4.4% tensile strain along the [001] direction. Benefiting from synergetic controls of surface and strain engineering, Pt atomic-layer catalyst (Ptatomic-layer) achieves a remarkable enhancement on ethanol electrooxidation performance with excellent specific activity of 5.83 mA cm-2 and mass activity of 1166.6 mA mg Pt-1, which is 10.6 and 3.6 times higher than the commercial Pt/C, respectively. Moreover, the intermetallic core endows Ptatomic-layer with outstanding durability. In situ infrared reflection-absorption spectroscopy as well as density functional theory calculations reveal that tensile strain and rich defects of Ptatomci-layer facilitate to break C-C bond for complete ethanol oxidation for enhanced performance.

Recent Progress of Two-Dimensional Materials for Ultrafast Photonics.

Owing to their extraordinary physical and chemical properties, two-dimensional (2D) materials have aroused extensive attention and have been widely used in photonic and optoelectronic devices, catalytic reactions, and biomedicine. In particular, 2D materials possess a unique bandgap structure and nonlinear optical properties, which can be used as saturable absorbers in ultrafast lasers. Here, we mainly review the top-down and bottom-up methods for preparing 2D materials, such as graphene, topological insulators, transition metal dichalcogenides, black phosphorus, and MXenes. Then, we focus on the ultrafast applications of 2D materials at the typical operating wavelengths of 1, 1.5, 2, and 3 µm. The key parameters and output performance of ultrafast pulsed lasers based on 2D materials are discussed. Furthermore, an outlook regarding the fabrication methods and the development of 2D materials in ultrafast photonics is also presented.

MXenes: synthesis, incorporation, and applications in ultrafast lasers.

The rapid expansion of nanotechnology and material science prompts two-dimensional (2D) materials to be extensively used in biomedicine, optoelectronic devices, and ultrafast photonics. Owing to the broadband operation, ultrafast recovery time, and saturable absorption properties, 2D materials become the promising candidates for being saturable absorbers in ultrafast pulsed lasers. In recent years, the novel 2D MXene materials have occupied the forefront due to their superior optical and electronic, as well as mechanical and chemical properties. Herein, we introduce the fabrication methods of MXenes, incorporation methods of combining 2D materials with laser cavities, and applications of ultrafast pulsed lasers based on MXenes. Firstly, top-down and bottom-up approaches are two types of fabrication methods, where top-down way mainly contains acid etching and the chief way of bottom-up method is chemical vapor deposition. In addition to these two typical ones, other methods are also discussed. Then we summarize the advantages and drawbacks of these approaches. Besides, commonly used incorporation methods, such as sandwich structure, optical deposition, as well as coupling with D-shaped, tapered, and photonic crystal fibers are reviewed. We also discuss their merits, defects, and conditions of selecting different methods. Moreover, we introduce the state of the art of ultrafast pulsed lasers based on MXenes at different wavelengths and highlight some excellent output performance. Ultimately, the outlook for improving fabrication methods and applications of MXene-based ultrafast lasers is presented.