Lead-free ferroelectrics with giant unipolar strain for high-precision actuators.

The trade-off between electrostrain and strain hysteresis for piezo/ferroelectric materials largely restrains the development of high precision actuators and remains unresolved over the past few decades. Here, a simple composition of (Bi0.5Na0.5)1-x/100Srx/100TiO3 in the ergodic relaxor state is collaboratively designed through the segregated domain structure with the ferroelectric core, local polarization heterogeneity, and defect engineering. The ferroelectric core can act as a seed to facilitate the field-induced nonpolar-to-polar transition. Together with the internal bias field caused by defect dipoles and adjusted through electric field cycling and heat treatment technology, a giant unipolar strain of 1.03% is achieved in the x = 30 ceramic with a low hysteresis of 27%, while the electric-field-independent large-signal piezoelectric strain coefficient of ~1000 pm/V and ultralow hysteresis of <10% can be obtained in the x = 35 ceramic. Intriguingly, the low-hysteresis high strain also exhibits near-zero remnant strain, excellent temperature and cycling stability.

GO/Cu Nanosheet-Integrated Hydrogel Platform as a Bioactive and Biocompatible Scaffold for Enhanced Calvarial Bone Regeneration.

Purpose: The treatment of craniofacial bone defects caused by trauma, tumors, and infectious and degenerative diseases is a significant issue in current clinical practice. Following the rapid development of bone tissue engineering (BTE) in the last decade, bioactive scaffolds coupled with multifunctional properties are in high demand with regard to effective therapy for bone defects. Herein, an innovative bone scaffold consisting of GO/Cu nanoderivatives and GelMA-based organic-inorganic hybrids was reported for repairing full-thickness calvarial bone defect. Methods: In this study, motivated by the versatile biological functions of nanomaterials and synthetic hydrogels, copper nanoparticle (CuNP)-decorated graphene oxide (GO) nanosheets (GO/Cu) were combined with methacrylated gelatin (GelMA)-based organic-inorganic hybrids to construct porous bone scaffolds that mimic the extracellular matrix (ECM) of bone tissues by photocrosslinking. The material characterizations, in vitro cytocompatibility, macrophage polarization and osteogenesis of the biohybrid hydrogel scaffolds were investigated, and two different animal models (BALB/c mice and SD rats) were established to further confirm the in vivo neovascularization, macrophage recruitment, biocompatibility, biosafety and bone regenerative potential. Results: We found that GO/Cu-functionalized GelMA/ß-TCP hydrogel scaffolds exhibited evidently promoted osteogenic activities, M2 type macrophage polarization, increased secretion of anti-inflammatory factors and excellent cytocompatibility, with favorable surface characteristics and sustainable release of Cu2+. Additionally, improved neovascularization, macrophage recruitment and tissue integration were found in mice implanted with the bioactive hydrogels. More importantly, the observations of microCT reconstruction and histological analysis in a calvarial bone defect model in rats treated with GO/Cu-incorporated hydrogel scaffolds demonstrated significantly increased bone morphometric values and newly formed bone tissues, indicating accelerated bone healing. Conclusion: Taken together, this BTE-based bone repair strategy provides a promising and feasible method for constructing multifunctional GO/Cu nanocomposite-incorporated biohybrid hydrogel scaffolds with facilitated osteogenesis, angiogenesis and immunoregulation in one system, with the optimization of material properties and biosafety, it thereby demonstrates great application potential for correcting craniofacial bone defects in future clinical scenarios.

Improved Energy Density at High Temperatures of FPE Dielectrics by Extreme Low Loading of CQDs.

Electrostatic capacitors, with the advantages of high-power density, fast charging-discharging, and outstanding cyclic stability, have become important energy storage devices for modern power electronics. However, the insulation performance of the dielectrics in capacitors will significantly deteriorate under the conditions of high temperatures and electric fields, resulting in limited capacitive performance. In this paper, we report a method to improve the high-temperature energy storage performance of a polymer dielectric for capacitors by incorporating an extremely low loading of 0.5 wt% carbon quantum dots (CQDs) into a fluorene polyester (FPE) polymer. CQDs possess a high electron affinity energy, enabling them to capture migrating carriers and exhibit a unique Coulomb-blocking effect to scatter electrons, thereby restricting electron migration. As a result, the breakdown strength and energy storage properties of the CQD/FPE nanocomposites are significantly enhanced. For instance, the energy density of 0.5 wt% CQD/FPE nanocomposites at room temperature, with an efficiency (η) exceeding 90%, reached 9.6 J/cm3. At the discharge energy density of 0.5 wt%, the CQD/FPE nanocomposites remained at 4.53 J/cm3 with an efficiency (η) exceeding 90% at 150 °C, which surpasses lots of reported results.

Manganese self-boosting hollow nanoenzymes with glutathione depletion for synergistic cancer chemo-chemodynamic therapy.

Chemodynamic therapy (CDT) has outstanding potential as a combination therapy to treat cancer. However, the effectiveness of CDT in the treatment of solid tumors is limited by the overexpression of glutathione (GSH) in the tumor microenvironment (TME). GSH overexpression diminishes oxidative stress and attenuates chemotherapeutic drug-induced apoptosis in cancer cells. To counter these effects, a synergistic CDT/chemotherapy cancer treatment, involving the use of a multifunctional bioreactor of hollow manganese dioxide (HMnO2) loaded with cisplatin (CDDP), was developed. Metal nanoenzymes that can auto-degrade to produce Mn2+ exhibit Fenton-like, GSH-peroxidase-like activity, which effectively depletes GSH in the TME to attenuate the tumor antioxidant capacity. In an acidic environment, Mn2+ catalyzed the decomposition of intra-tumor H2O2 into highly toxic ·OH as a CDT. HMnO2 with large pores, pore volume, and surface area exhibited a high CDDP loading capacity (>0.6 g-1). Treatment with CDDP-loaded HMnO2 increased the intratumor Pt-DNA content, leading to the up-regulation of γ-H2Aχ and an increase in tumor tissue damage. The decreased GSH triggered by HMnO2 auto-degradation protected Mn2+-generated ·OH from scavenging to amplify oxidative stress and enhance the efficacy of CDT. The nanoenzymes with encapsulated chemotherapeutic agents deplete GSH and remodel the TME. Thus, tumor CDT/chemotherapy combination therapy is an effective therapeutic strategy.

Integration of Ultrathin Hafnium Oxide with a Clean van der Waals Interface for Two-Dimensional Sandwich Heterostructure Electronics.

Integrating high-κ dielectrics with a small equivalent oxide thickness (EOT) with two-dimensional (2D) semiconductors for low-power consumption van der Waals (vdW) heterostructure electronics remains challenging in meeting both interface quality and dielectric property requirements. Here, we demonstrate the integration of ultrathin amorphous HfOx sandwiched within vdW heterostructures by the selective thermal oxidation of HfSe2 precursors. The self-cleaning process ensures a high-quality interface with a low interface state density of 1011-1012 cm-2 eV-1. The synthesized HfOx displays excellent dielectric properties with an EOT of ∼1.5 nm, i.e., a high κ of ∼16, an ultralow leakage current of 10-6 A/cm2, and an impressively high breakdown field of 9.5 MV/cm. This facilitates low-power consumption vdW heterostructure MoS2 transistors, demonstrating steep switching with a low subthreshold swing of 61 mV/decade. This one-step integration of high-κ dielectrics into vdW sandwich heterostructures holds immense potential for developing low-power consumption 2D electronics while meeting comprehensive dielectric requirements.

Oxygen self-supplying small size magnetic nanoenzymes for synergistic photodynamic and catalytic therapy of breast cancer.

In recent years, tumor catalytic therapy based on nanozymes has attracted widespread attention. However, its application is limited by the tumor hypoxic microenvironment (TME). In this study, we developed oxygen-supplying magnetic bead nanozymes that integrate hemoglobin and encapsulate the photosensitizer curcumin, demonstrating reactive oxygen species (ROS)-induced synergistic breast cancer therapy. Fe3O4 magnetic bead-mediated catalytic dynamic therapy (CDT) generates hydroxyl radicals (˙OH) through the Fenton reaction in the tumor microenvironment. The Hb-encapsulated Fe3O4 magnetic beads can be co-loaded with the photosensitizer/chemotherapeutic agent curcumin (cur), resulting in Fe3O4-Hb@cur. Under hypoxic conditions, oxygen molecules are released from Fe3O4-Hb@cur to overcome the TME hypoxia, resulting in comprehensive effects favoring anti-tumor responses. Upon near-infrared (NIR) irradiation, Fe3O4-Hb@cur activates the surrounding molecular oxygen to generate a certain amount of singlet oxygen (1O2), which is utilized for photodynamic therapy (PDT) in cancer treatment. Meanwhile, we validated that the O2 carried by Hb significantly enhances the intracellular ROS level, intensifying the catalytic therapy mediated by Fe3O4 magnetic beads and inflicting lethal damage to cancer cells, effectively inhibiting tumor growth. Therefore, significant in vivo synergistic therapeutic effects can be achieved through catalytic-photodynamic combination therapy.

Evaluation of the Robustness Verification of Downstream Production Process for Inactivated SARS-CoV-2 Vaccine and Different Chromatography Medium Purification Effects.

BACKGROUND: Large-scale vaccine production requires downstream processing that focuses on robustness, efficiency, and cost-effectiveness. METHODS: To assess the robustness of the current vaccine production process, three batches of COVID-19 Omicron BA.1 strain hydrolytic concentrated solutions were selected. Four gel filtration chromatography media (Chromstar 6FF, Singarose FF, Bestarose 6B, and Focurose 6FF) and four ion exchange chromatography media (Maxtar Q, Q Singarose, Diamond Q, and Q Focurose) were used to evaluate their impact on vaccine purification. The quality of the vaccine was assessed by analyzing total protein content, antigen content, residual Vero cell DNA, residual Vero cell protein, and residual bovine serum albumin (BSA). Antigen recovery rate and specific activity were also calculated. Statistical analysis was conducted to evaluate process robustness and the purification effects of the chromatography media. RESULTS: The statistical analysis revealed no significant differences in antigen recovery (p = 0.10), Vero HCP residue (p = 0.59), Vero DNA residue (p = 0.28), and BSA residue (p = 0.97) among the three batches of hydrolytic concentrated solutions processed according to the current method. However, a significant difference (p < 0.001) was observed in antigen content. CONCLUSIONS: The study demonstrated the remarkable robustness of the current downstream process for producing WIBP-CorV vaccines. This process can adapt to different batches of hydrolytic concentrated solutions and various chromatography media. The research is crucial for the production of inactivated SARS-CoV-2 vaccines and provides a potential template for purifying other viruses.

Highly Flexible, High-Performance, and Stretchable Piezoelectric Sensor Based on a Hierarchical Droplet-Shaped Ceramics with Enhanced Damage Tolerance.

Stretchable self-powered sensors are of significant interest in next-generation wearable electronics. However, current strategies for creating stretchable piezoelectric sensors based on piezoelectric polymers or 0-3 piezoelectric composites face several challenges such as low piezoelectric activity, low sensitivity, and poor durability. In this paper, a biomimetic soft-rigid hybrid strategy is used to construct a new form of highly flexible, high-performance, and stretchable piezoelectric sensor. Inspired by the hinged bivalve Cristaria plicata, hierarchical droplet-shaped ceramics are manufactured and used as rigid components, where computational models indicate that the unique arched curved surface and rounded corners of this bionic structure can alleviate stress concentrations. To ensure electrical connectivity of the piezoelectric phase during stretching, a patterned liquid metal acts as a soft circuit and a silicone polymer with optimized wettability and stretchability serves as a soft component that forms a strong mechanical interlock with the hierarchical ceramics. The novel sensor design exhibits excellent sensitivity and durability, where the open circuit voltage remains stable after 5000 stretching cycles at 60% strain and 5000 twisting cycles at 180°. To demonstrate its potential in heathcare applications, this new stretchable sensor is successfully used for wireless gesture recognition and assessing the progression of knee osteoarthritis.

Quasi-Zero-Dimensional Ferroelectric Polarization Charges-Coupled Resistance Switching with High-Current Density in Ultrascaled Semiconductors.

Ferroelectric memristors hold immense promise for advanced memory and neuromorphic computing. However, they face limitations due to low readout current density in conventional designs with low-conductive ferroelectric channels, especially at the nanoscale. Here, we report a ferroelectric-mediated memristor utilizing a 2D MoS2 nanoribbon channel with an ultrascaled cross-sectional area of <1000 nm2, defined by a ferroelectric BaTiO3 nanoribbon stacked on top. Strikingly, the Schottky barrier at the MoS2 contact can be effectively tuned by the charge transfers coupled with quasi-zero-dimensional polarization charges formed at the two ends of the nanoribbon, which results in distinctive resistance switching accompanied by multiple negative differential resistance showing the high-current density of >104 A/cm2. The associated space charges in BaTiO3 are minimized to ∼3.7% of the polarization charges, preserving nonvolatile polarization. This achievement establishes ferroelectric-mediated nanoscale semiconductor memristors with high readout current density as promising candidates for memory and highly energy-efficient in-memory computing applications.

The FJQR Has Synergistic Effect with Fluoropyrimidine in the Maintenance Treatment for HER-2 Negative Gastric Cancer.

INTRODUCTION: Maintenance therapy aimed to strengthen the first-line chemotherapy and improve quality of life is needed for gastric cancer (GC). Currently, many clinical studies have confirmed the important role of fluoropyrimidine in the maintenance stage. Our team has created patented prescriptions "Fuzheng jiedu Quyu Method" recipe (FJQR), which was considered as an adjuvant therapeutic scheme (reduce toxicity and increase the efficacy of chemotherapy). This study aimed to evaluate the efficacy and safety of FJQR combined with fluoropyrimidine as a maintenance treatment in HER-2 negative GC patients. METHODS: We performed the analysis of 129 patients with HER-2 negative GC who entered the maintenance stage in our hospital and Tianjin Cancer Hospital between January 2018 and December 2020. Out of the 129 eligible patients, 64 were categorized into the maintenance treatment group with FJQR+fluoropyrimidine, and 65 patients were assigned to the control group if they received fluoropyrimidine alone. Capecitabine was orally 1000mg/m2, Qd, half an hour after meals, and FGQR was 15g Bid after capecitabine. The primary endpoint was progression-free survival (PFS). The secondary endpoints were overall survival (OS), overall remission rate (ORR), quality of Life (QOL), TCM syndrome and safety. RESULTS: The mPFS in the treatment group was significantly prolonged compared with the control group (6.3 vs. 5.0 months, p = 0.03), while the mOS was not substantially improved (11.4 vs. 10.5 months, p = 0.38). Gastrointestinal symptoms and pain became better in the treatment group. The number of distant metastatic organs, first-line chemotherapy cycles, and lymph node metastasis were independent risk predictors for PFS. Blood stasis syndrome may be the protective factor. In terms of safety, treatment-related adverse events (AEs) in the treatment group were relatively lighter, and the incidence of grade III-IV AEs could be significantly reduced. CONCLUSION: FJQR and fluoropyrimidine have synergistic effects as maintenance treatment in HER-2 negative GC, with good efficacy and safety.

Octylammonium Iodide Induced In-situ Healing at "perovskite/Carbon" Interface to Achieve 85% RH-moisture Stable, Hole-Conductor-Free Perovskite Solar Cells with Power Conversion Efficiency >19.

"Perovskite/carbon" interface is a bottle-neck for hole-conductor-free, carbon-electrode basing perovskite solar cells due to the energy mismatch and concentrated defects. In this article, in-situ healing strategy is proposed by doping octylammonium iodide into carbon paste that used to prepare carbon-electrode on perovskite layer. This strategy is found to strengthen interfacial contact and reduce interfacial defects on one hand, and slightly elevate the work function of the carbon-electrode on other hand. Due to this effect, charge extraction is accelerated, while recombination is obviously reduced. Accordingly, power conversion efficiency of the hole-conductor-free, planar perovskite solar cells is upgraded by ≈50%, or from 11.65 (± 1.59) % to 17.97 (± 0.32) % (AM1.5G, 100 mW cm-2 ). The optimized device shows efficiency of 19.42% and open-circuit voltage of 1.11 V. Meanwhile, moisture-stability is tested by keeping the unsealed devices in closed chamber with relative humidity of 85%. The "in-situ healing" strategy helps to obtain T80 time of >450 h for the carbon-electrode basing devices, which is four times of the reference ones. Thus, a kind of "internal encapsulation effect" has also been reached. The "in situ healing" strategy facilitates the fabrication of efficient and stable hole-conductor-free devices basing on carbon-electrode.

Clinical efficacy of Camrelizumab combined with first-line chemotherapy in extensive-stage small-cell lung cancer.

Objective: Exploring the clinical efficacy of camrelizumab in combination with first-line chemotherapy in patients with extensive-stage small-cell lung cancer (ES-SCLC). Methods: The clinical data of 35 patients with ES-SCLC who received camrelizumab combined with EC or EP regimen in First Teaching Hospital of Tianjin University of Traditional Chinese Medicine from January 2020 to January 2023 were retrospectively analyzed. The primary endpoint was progression-free survival (PFS), and the secondary endpoints were OS, ORR and DCR. SPSS 25.0 software was used for statistical analysis, Kaplan-Meier curve and Log-Rank test analysis, and survival curve was drawn. Results: The median PFS of 35 patients with SCLC was 7.4 months (95 % CI 6.75-9.81 months), .and the median OS was 12.5 months (95% CI,11.71-16.90 months). The ORR and DCR were 65.7 % and 74.3 %, respectively. Adverse events (AEs) were mainly concentrated in grade 1-2, and the probability of occurrence of grade 3 or above was low. Reactive Cutaneous Capillary Endothelial Proliferation (RCCEP) was the most common, followed by nausea &vomit and anemia. The other common AEs included abnormal thyroid function, decreased neutrophil count, skin rash and leucopenia. Conclusion: Camrelizumab in combination with first-line chemotherapy regimens prolonged OS and PFS in SCLC patients and showed efficacy and safety in real-world data.

Electromechanical Performance Optimization of Ni-Doped Bi(Sc, Zr)O3-PbTiO3 Ceramics and Microstructure Analysis.

BiScO3-PbTiO3-based ceramics show great potential in high-temperature piezoelectric applications. However, their high dielectric loss tan δ and low mechanical quality factor Qm have to be optimized. In this paper, a ceramic system of (1-y)Bi(Sc0.975Zr0.025)O3-yPb(Ti1-xNix)O3 (BSZ-yPT-xNi, x = 0, 0.015, 0.025, and 0.035 and y = 0.62, 0.63, 0.64, and 0.65) was systematically investigated. Increase in x or y values leads to the enhancement of the tetragonal phase and tetragonal lattice distortion. The rhombohedral/tetragonal morphotropic phase boundary (MPB) locates in the vicinity of y = 0.64 for the x = 0 and 0.015 samples, and y = 0.63 for the x = 0.025 and 0.035 samples. For these MPB samples, the substitution of Ni2+ for Ti4+ causes domain refinement, evolving from the submicrometer lamellar domains to hierarchical domains, and finally to the high-density stripe-like nanodomains, which benefits the domain wall motion and makes the coercive field reduced. However, the alignment of defect dipoles (NiTi''-VO••) after the sufficient poling and aging treatment induces the noticeable internal bias field, which increases with the addition of Ni2+. Apparent piezoelectric "hardening" occurred, evidenced by the increase in Qm and the reduction in tan δ. Among the MPB samples, the x = 0.025/y = 0.63 ceramic shows the superior comprehensive electromechanical performance with the d33 of 380 pC/N, kt of 0.51, Qm of 112, and tan δ of 0.010. Besides, excellent temperature stability was achieved with the d33 of 367-380 pC/N, Qm of 106-112, and tan δ ≤ 0.010 in the temperature range of 25-250 °C.

Back focal plane imaging for light emission from a tunneling junction in a low-temperature ultrahigh-vacuum scanning tunneling microscope.

We report the design and realization of the back focal plane (BFP) imaging for the light emission from a tunnel junction in a low-temperature ultrahigh-vacuum (UHV) scanning tunneling microscope (STM). To achieve the BFP imaging in a UHV environment, a compact "all-in-one" sample holder is designed and fabricated, which allows us to integrate the sample substrate with the photon collection units that include a hemisphere solid immersion lens and an aspherical collecting lens. Such a specially designed holder enables the characterization of light emission both within and beyond the critical angle and also facilitates the optical alignment inside a UHV chamber. To test the performance of the BFP imaging system, we first measure the photoluminescence from dye-doped polystyrene beads on a thin Ag film. A double-ring pattern is observed in the BFP image, arising from two kinds of emission channels: strong surface plasmon coupled emissions around the surface plasmon resonance angle and weak transmitted fluorescence maximized at the critical angle, respectively. Such an observation also helps to determine the emission angle for each image pixel in the BFP image and, more importantly, proves the feasibility of our BFP imaging system. Furthermore, as a proof-of-principle experiment, electrically driven plasmon emissions are used to demonstrate the capability of the constructed BFP imaging system for STM induced electroluminescence measurements. A single-ring pattern is obtained in the BFP image, which reveals the generation and detection of the leakage radiation from the surface plasmon propagating on the Ag surface. Further analyses of the BFP image provide valuable information on the emission angle of the leakage radiation, the orientation of the radiating dipole, and the plasmon wavevector. The UHV-BFP imaging technique demonstrated here opens new routes for future studies on the angular distributed emission and dipole orientation of individual quantum emitters in UHV.

Achieving Ultrahigh Energy Storage Performance for NaNbO3-Based Lead-Free Antiferroelectric Ceramics via the Coupling of the Stable Antiferroelectric R Phase and Nanodomain Engineering.

NaNbO3(NN)-based lead-free eco-friendly antiferroelectric (AFE) ceramics with an extremely high maximum polarization (Pm) are believed to be a promising alternative to traditional lead-based ceramics. Nevertheless, the high energy dissipation resulting from the large polarization hysteresis, which arises from the AFE-ferroelectric (FE) phase transition, poses a great challenge to the application of this promising ceramic. Herein, an excellent recoverable energy storage density (Wrec) was attained by intentionally designing a (0.86 - x) NaNbO3-0.14CaTiO3-xBiMg2/3Nb1/3O3 (NN-CT-xBMN) relaxor antiferroelectric ceramic, attributed to the synergistic effect of the stable AFE R phase and nanodomain engineering to overcome the bottleneck. The obtained results illustrate that the inclusion of BMN causes the transition from AFE microdomains to nanodomains and stabilizes the relaxor AFE orthorhombic R phase, which generates a highly stable polarization field response with low hysteresis and delays the AFE-FE phase transition, thus improving energy storage density. As a consequence, a high Wrec of 5.41 J cm-3 with an excellent conversion efficiency η of 86.7% was obtained in the NN-CT-0.08BMN ceramic. Moreover, the NN-CT-0.08BMN ceramic exhibits superior stability in temperature (25-150 °C), frequency (1-600 Hz), and fatigue behavior (10°-104 cycles) together with a large current density (CD = 810 A cm-2), ultrahigh power density (PD = 118 MW cm-3), and ultrafast discharge rate (t0.9 < 0.7 µs). This superior energy storage density, coupled with outstanding stability, suggests that the NN-CT-0.08BMN ceramic has the potential to be a promising candidate for pulsed power applications and power electronics.

Maintenance anlotinib improves the survival prognosis of extensive-stage small cell lung cancer: a single-arm, prospective, phase II study.

The extent to which anlotinib provides survival benefits in the maintenance therapy of extensive-stage small cell lung cancer (ES-SCLC) remains unclear. Thus, this study aimed to assess the efficacy and safety of anlotinib monotherapy as maintenance therapy following induction chemotherapy in ES-SCLC patients. 27 ES-SCLC patients registered at the First Teaching Hospital of Tianjin University of Traditional Chinese Medicine were screened from February 2022 to October 2022, of which 3 were not eligible. Eligible patients in stable status after first-line chemotherapy would subsequently accept oral anlotinib (12 mg, p.o., qd. on d1-d14, every 21 days). The maintenance method was continued until disease progression or unmanageable toxicity occurred. The primary endpoint is median progression-free survival (mPFS). The second endpoints include median duration of response (mDOR), median overall survival (mOS) and safety. The mPFS and mDOR have been determined (mPFS: 252 days, 95% CI: 217.782-286.218 days; mDOR: 126 days, 95% CI: 98.899-153.101 days). The mOS was not reached; only 7 patients were reached while 20 patients survived. The primary treatment-related adverse events included hypertension (n=7, 25.9%), fatigue (n=5, 18.5%), poor appetite (n=5, 18.5%), and others. Notably, no patients required a dose reduction due to the severity of adverse events. Patients were generally able to tolerate treatment with anlotinib and exhibited a favorable prognosis. Anlotinib achieved prospective efficacy and manageable safety in the maintenance treatment of ES-SCLC.

Enhancing High-Temperature Energy Storage Performance of PEI-Based Dielectrics by Incorporating ZIF-67 with a Narrow Bandgap.

Polymer dielectrics are crucial for use in electrostatic capacitors, owing to their high voltage resistance, high energy storage density, and ultrahigh reliability. Furthermore, high-temperature-resistant polymer dielectrics are applied in various emerging fields. Herein, poly(ether imide) (PEI)-based polymer dielectrics prepared by adding a low loading of dimethylimidazolium cobalt (ZIF-67) with a narrow bandgaps are investigated. The results show that the composites exhibit considerably increased Young's modulus, suppressed conductivity loss, and improved breakdown strength compared with pure PEI. Consequently, a stable energy storage performance is realized for ZIF-67/PEI composites. Particularly, at 150 °C, 1 wt % ZIF-67/PEI composite affords an excellent energy storage density of 4.59 J/cm3 with a discharge energy efficiency of 80.6%, exhibiting a considerable increase compared with the values obtained for PEI (2.58 J/cm3 with a discharge energy efficiency of 68.8%). The results of this study reveal a feasible pathway to design polymer dielectrics with the potential for use in capacitive applications in harsh environments.

Comparison of plant diversity-carbon storage relationships along altitudinal gradients in temperate forests and shrublands.

Understanding the mechanisms underlying the relationship between biodiversity and ecosystem function (BEF) is critical for the implementation of productive and resilient ecosystem management. However, the differences in BEF relationships along altitudinal gradients between forests and shrublands are poorly understood, impeding the ability to manage terrestrial ecosystems and promote their carbon sinks. Using data from 37962 trees of 115 temperate forest and 134 shrubland plots of Taihang Mountains Priority Reserve, we analyzed the effects of species diversity, structural diversity, climate factors and soil moisture on carbon storage along altitudinal gradients in temperate forests and shrublands. We found that: (1) Structural diversity, rather than species diversity, mainly promoted carbon storage in forests. While species diversity had greater positive effect on carbon storage in shrublands. (2) Mean annual temperature (MAT) had a direct negative effect on forest carbon storage, and indirectly affected forest carbon storage by inhibiting structural diversity. In contrast, MAT promoted shrubland carbon storage directly and indirectly through the positive mediating effect of species diversity. (3) Increasing altitudinal gradients enhanced the structural diversity-carbon relationship in forests, but weakened the species diversity-carbon relationship in shrublands. Niche and architectural complementarity and different life strategies of forests and shrubs mainly explain these findings. These differential characteristics are critical for our comprehensive understanding of the BEF relationship and could help guide the differentiated management of forests and shrublands in reaction to environmental changes.

The clinical application of atorvastatin in patients with small-cell lung cancer with dyslipidemia.

BACKGROUND: Various experimental studies demonstrated that atorvastatin exerted additive effects with anticancer drugs to impair tumor growth, delay relapse, and prolong survival time in lung cancer. However, it is indistinct whether there are survival benefits of atorvastatin in the treatment of small-cell lung cancer (SCLC) patients with dyslipidemia. Therefore, this study aimed to evaluate the efficacy and safety of atorvastatin plus first-line standard chemotherapy in SCLC combined dyslipidemia. METHODS: This was a retrospective analysis of 91 eligible SCLC patients with dyslipidemia registered at the First Teaching Hospital of Tianjin University of Traditional Chinese Medicine from October 2018 to October 2022. SCLC patients with confirmed dyslipidemia were assigned to the treatment group to receive atorvastatin plus first-line standard chemotherapy (n = 45) or to the control group to accept chemotherapy (n = 46) until disease progression or unmanageable toxicity occurred. The clinicopathological parameters and survival data were collected and analyzed. Univariate and multivariate analyses were performed to investigate the prognostic significance of SCLC. The median progression-free survival (mPFS) was considered to be the pivotal symbol as the primary endpoint. The second endpoints were recognized as the median overall survival (mOS) and toxicity. RESULTS: In the total of 91 enrolled patients, the curative effect can be evaluated in all patients. Research results showed that atorvastatin added to first-line standard chemotherapy was associated with a significant improvement in survival (mPFS: 7.4 vs 6.8 months, P = 0.031; mOS: 14.7 vs 13.2 months, P = 0.002). CONCLUSION: Atorvastatin added to first-line standard chemotherapy achieved prospective efficacy and manageable safety in SCLC combined dyslipidemia.