Correction: First-principles calculations of interfacial thermal transport properties between SiC/Si substrates and compounds of boron with selected group V elements.

Correction for 'First-principles calculations of interfacial thermal transport properties between SiC/Si substrates and compounds of boron with selected group V elements' by Zhehao Sun et al., Phys. Chem. Chem. Phys., 2019, 21, 6011-6020, https://doi.org/10.1039/C8CP07516F.

In Situ Formation of Iodide Precursor for Perovskite Quantum Dots with Application in Efficient Solar Cells.

Perovskite quantum dots (PQDs) become a kind of competitive material for fabricating high-performance solar cells due to their solution processability and outstanding optoelectronic properties. However, the current synthesis method of PQDs is mostly based on the binary-precursor method, which results in a large deviation of the I/Pb input ratio in the reaction system from the stoichiometric ratio of PQDs. Herein, a ternary-precursor method with an iodide source self-filling ability is reported for the synthesis of the CsPbI3 PQDs with high optoelectronic properties. Systematically experimental characterizations and theoretical calculations are conducted to fundamentally understand the effects of the I/Pb input molar ratio on the crystallographic and optoelectronic properties of PQDs. The results reveal that increasing the I/Pb input molar ratio can obtain ideal cubic structure PQDs with iodine-rich surfaces, which can significantly reduce the surface defects of PQDs and realize high orientation of PQD solids, facilitating charge carrier transport in the PQD solids with diminished nonradiative recombination. Consequently, the PQD solar cells exhibit an impressive efficiency of 15.16%, which is largely improved compared with that of 12.83% for the control solar cell. This work provides a feasible strategy for synthesizing high-quality PQDs for high-performance optoelectronic devices.

Coupled stack-up volume RF coils for low-field MR imaging.

Motivation: Low-field MRI has garnered significant attention in recent years due to its unique advantages in safety, cost-effectiveness and accessibility. However, lower field strength comes with an inherently lower SNR as its primary limitation. Goals: In this work, we introduce a novel volume RF coil design using coupled stack-up resonators to mitigate this challenge. Approach: To demonstrate the proposed design, we take 0.5T as an example field strength and designed a prototype coupled stack-up volume coil operating in the 20MHz range. Results: Compared to the birdcage coil, the proposed design significantly improves RF field efficiency and homogeneity, ultimately enhancing the performance of low-field MRI. Impact: The proposed stack-up volume coil outperforms the standard birdcage coil in B1 efficiency and field homogeneity at low fields, ultimately improving the performance of low-field MRI and advancing its applications.

Electric field and SAR reduction in high-impedance RF arrays by using high permittivity materials for 7T MR imaging.

In the field of ultra-high field MR imaging, the challenges associated with higher frequencies and shorter wavelengths necessitate rigorous attention to multichannel array design. While the need for such arrays remains, and efforts to increase channel counts continue, a persistent impediment-inter-element coupling-constantly hinders development. This coupling degrades current and field distribution, introduces noise correlation between channels, and alters the frequency of array elements, affecting image quality and overall performance. The goal of optimizing ultra-high field MRI goes beyond resolving inter-element coupling and includes significant safety considerations related to the design changes required to achieve high-impedance coils. Although these coils provide excellent isolation, the higher impedance needs special design changes. However, such changes pose a significant safety risk in the form of strong electric fields across low-capacitance lumped components. This process may raise Specific Absorption Rate (SAR) values in the imaging subject, increasing power deposition and, as a result, the risk of tissue heating-related injury. To balance the requirement of inter-element decoupling with the critical need for safety, we suggest a new solution. Our method uses high-dielectric materials to efficiently reduce electric fields and SAR values in the imaging sample. This intervention tries to maintain B1 efficiency and inter-element decoupling within the existing array design, which includes high-impedance coils. Our method aims to promote the full potential of ultra-high field MRI by alleviating this critical safety concern with minimal changes to the existing array setup.

Multimodal surface coils for small animal MR imaging at ultrahigh fields.

Motivation: High performance RF coils are needed for better SNR so that higher resolution and spectral dispersion can be obtained in small animal MR imaging. Goals: To develop a surface coil with improved SNR over the conventional surface coil for small animal imaging at 7T. Approach: A small animal surface coil is designed based on multimodal surface coil technique. The coil is investigated and compared with conventional surface coil using full-wave electromagnetic simulations. Results: The multimodal surface coil shows superior B1 field efficiency and lower E field over standard coils, indicating a potential to gain SNR and resolution. Impact: The proposed multimodal surface coil can operate at high frequency and provides improved SNR over conventional surface coils at 7T, opening avenues for highly efficient coil design in small animal imaging, ultimately enabling the detection of previously indiscernible physiological details.

Multimodal surface coils for low field MR imaging.

Low field MRI is safer and more cost effective than the high field MRI. One of the inherent problems of low field MRI is its low signal-to-noise ratio or sensitivity. In this work, we introduce a multimodal surface coil technique for signal excitation and reception to improve the RF magnetic field (B1) efficiency and potentially improve MR sensitivity. The proposed multimodal surface coil consists of multiple identical resonators that are electromagnetically coupled to form a multimodal resonator. The field distribution of its lowest frequency mode is suitable for MR imaging applications. The prototype multimodal surface coils are built, and the performance is investigated and validated through numerical simulation, standard RF measurements and tests, and comparison with the conventional surface coil at low fields. Our results show that the B1 efficiency of the multimodal surface coil outperforms that of the conventional surface coil which is known to offer the highest B1 efficiency among all coil categories, i.e., volume coil, half-volume coil and surface coil. In addition, in low-field MRI, the required low-frequency coils often use large value capacitance to achieve the low resonant frequency which makes frequency tuning difficult. The proposed multimodal surface coil can be conveniently tuned to the required low frequency for low-field MRI with significantly reduced capacitance value, demonstrating excellent low-frequency operation capability over the conventional surface coil.

LPS-induced senescence of macrophages aggravates calcification and senescence of vascular smooth muscle cells via IFITM3.

BACKGROUND: Cellular senescence, macrophages infiltration, and vascular smooth muscle cells (VSMCs) osteogenic transdifferentiation participate in the pathophysiology of vascular calcification in chronic kidney disease (CKD). Senescent macrophages are involved in the regulation of inflammation in pathological diseases. In addition, senescent cells spread senescence to neighboring cells via Interferon-induced transmembrane protein3 (IFITM3). However, the role of senescent macrophages and IFITM3 in VSMCs calcification remains unexplored. AIMS: To explore the hypothesis that senescent macrophages contribute to the calcification and senescence of VSMCs via IFITM3. METHODS: Here, the macrophage senescence model was established using Lipopolysaccharides (LPS). The VSMCs were subjected to supernatants from macrophages (MCFS) or LPS-induced macrophages (LPS-MCFS) in the presence or absence of calcifying media (CM). Senescence-associated ß-galactosidase (SA-ß-gal), Alizarin red (AR), immunofluorescent staining, and western blot were used to identify cell senescence and calcification. RESULTS: The expression of IFITM3 was significantly increased in LPS-induced macrophages and the supernatants. The VSMCs transdifferentiated into osteogenic phenotype, expressing higher osteogenic differentiation markers (RUNX2) and lower VSMCs constructive makers (SM22α) when cultured with senescent macrophages supernatants. Also, senescence markers (p16 and p21) in VSMCs were significantly increased by senescent macrophages supernatants treated. However, IFITM3 knockdown inhibited this process. CONCLUSIONS: Our study showed that LPS-induced senescence of macrophages accelerated the calcification of VSMCs via IFITM3. These data provide a new perspective linking VC and aging, which may provide clues for diagnosing and treating accelerated vascular aging in patients with CKD.

Radiomics of pericoronary adipose tissue on computed tomography angiography predicts coronary heart disease in patients with type 2 diabetes mellitus.

BACKGROUND: Diabetes is a common chronic metabolic disease. The progression of the disease promotes vascular inflammation and the formation of atherosclerosis, leading to cardiovascular disease. The coronary artery perivascular adipose tissue attenuation index based on CCTA is a new noninvasive imaging biomarker that reflects the spatial changes in perivascular adipose tissue attenuation in CCTA images and the inflammation around the coronary arteries. In this study, a radiomics approach is proposed to extract a large number of image features from CCTA in a high-throughput manner and combined with clinical diagnostic data to explore the predictive ability of vascular perivascular adipose imaging data based on CCTA for coronary heart disease in diabetic patients. METHODS: R language was used for statistical analysis to screen the variables with significant differences. A presegmentation model was used for CCTA vessel segmentation, and the pericoronary adipose region was screened out. PyRadiomics was used to calculate the radiomics features of pericoronary adipose tissue, and SVM, DT and RF were used to model and analyze the clinical data and radiomics data. Model performance was evaluated using indicators such as PPV, FPR, AAC, and ROC. RESULTS: The results indicate that there are significant differences in age, blood pressure, and some biochemical indicators between diabetes patients with and without coronary heart disease. Among 1037 calculated radiomic parameters, 18.3% showed significant differences in imaging omics features. Three modeling methods were used to analyze different combinations of clinical information, internal vascular radiomics information and pericoronary vascular fat radiomics information. The results showed that the dataset of full data had the highest ACC values under different machine learning models. The support vector machine method showed the best specificity, sensitivity, and accuracy for this dataset. CONCLUSIONS: In this study, the clinical data and pericoronary radiomics data of CCTA were fused to predict the occurrence of coronary heart disease in diabetic patients. This provides information for the early detection of coronary heart disease in patients with diabetes and allows for timely intervention and treatment.

Band Engineering of Perovskite Quantum Dot Solids for High-Performance Solar Cells.

CsPbI3 perovskite quantum dot (PQD) shows high potential for next-generation photovoltaics due to their tunable surface chemistry, good solution-processability and unique photophysical properties. However, the remained long-chain ligand attached to the PQD surface significantly impedes the charge carrier transport within the PQD solids, thereby predominantly influencing the charge extraction of PQD solar cells (PQDSCs). Herein, a ligand-induced energy level modulation is reported for band engineering of PQD solids to improve the charge extraction of PQDSCs. Detailed theoretical calculations and systemic experimental studies are performed to comprehensively understand the photophysical properties of the PQD solids dominated by the surface ligands of PQDs. The results reveal that 4-nitrobenzenethiol and 4-methoxybenzenethiol molecules with different dipole moments can firmly anchor to the PQD surface through the thiol group to modulate the energy levels of PQDs, and a gradient band structure within the PQD solid is subsequently realized. Consequently, the band-engineered PQDSC delivers an efficiency of up to 16.44%, which is one of the highest efficiencies of CsPbI3 PQDSCs. This work provides a feasible avenue for the band engineering of PQD solids by tuning the surface chemistry of PQDs for high-performing solar cells or other optoelectronic devices.

Multimodal surface coils for low field MR imaging.

Low field MRI is safer and more cost effective than the high field MRI. One of the inherent problems of low field MRI is its low signal-to-noise ratio or sensitivity. In this work, we introduce a multimodal surface coil technique for signal excitation and reception to improve the RF magnetic field (B 1 ) efficiency and potentially improve MR sensitivity. The proposed multimodal surface coil consists of multiple identical resonators that are electromagnetically coupled to form a multimodal resonator. The field distribution of its lowest frequency mode is suitable for MR imaging applications. The prototype multimodal surface coils are built, and the performance is investigated and validated through numerical simulation, standard RF measurements and tests, and comparison with the conventional surface coil at low fields. Our results show that the B 1 efficiency of the multimodal surface coil outperforms that of the conventional surface coil which is known to offer the highest B 1 efficiency among all coil categories, i.e., volume coil, half-volume coil and surface coil. In addition, in low-field MRI, the required low-frequency coils often use large value capacitance to achieve the low resonant frequency which makes frequency tuning difficult. The proposed multimodal surface coil can be conveniently tuned to the required low frequency for low-field MRI with significantly reduced capacitance value, demonstrating excellent low-frequency operation capability over the conventional surface coil.

Meta-Analysis of Acupuncture Treatment for Cervicogenic Headache.

OBJECTIVE: To analyze and evaluate the clinical effect of acupuncture on cervicogenic headache (CEH), and provide evidence-based basis for clinical selection of acupuncture for CEH. METHODS: Databases including China Knowledge Network, Wanfang, VIP Chinese sci-tech journals, Chinese Biomedical, and PubMed were searched to collect clinical randomized controlled trials on the effectiveness of acupuncture in the treatment of CEH until November 2023. Statistical analysis was performed using the RevMan 5.4.1 software, and heterogeneity was assessed using the Q test (P value), allowing for the calculation of the combined effect odds ratio through either the fixed or random-effect model. Sensitivity analysis will be conducted by excluding articles with the highest weight, while the validity of the literature will be evaluated through the creation of a funnel plot to identify any potential biases. RESULTS: A total of 400 articles were retrieved, and eventually, 20 clinical randomized controlled trials were included in the analysis. Comparing with control, acupuncture exhibited a higher total effective rate in treating CEH. The cure rate was also higher in the experimental group, and improvements in short-term and long-term visual analogue scale scores outcomes were significantly greater than those in the control group. The quality-of-life scores were higher in CEH patients treated with acupuncture. Sensitivity analysis confirmed the stability and reliability of the pooled effect size results. The results of the funnel plot indicated the presence of publication bias. CONCLUSIONS: Acupuncture treatment is effective for CEH relief and worthy of clinical application.