Single-cell transcriptomics reveals neural stem cell trans-differentiation and cell subpopulations in whole heart decellularized extracellular matrix.

The whole heart decellularized extracellular matrix (ECM) has become a promising scaffold material for cardiac tissue engineering. Our previous research has shown that the whole heart acellular matrix possesses the memory function regulating neural stem cells (NSCs) trans-differentiating to cardiac lineage cells. However, the cell subpopulations and phenotypes in the trans-differentiation of NSCs have not been clearly identified. Here, we performed single-cell RNA sequencing and identified 2,765 cells in the recellularized heart with NSCs revealing the cellular diversity of cardiac and neural lineage, confirming NSCs were capable of trans-differentiating into the cardiac lineage while maintaining the original ability to differentiate into the neural lineage. Notably, the trans-differentiated heart-like cells have dual signatures of neuroectoderm and cardiac mesoderm. This study unveils an in-depth mechanism underlying the trans-differentiation of NSCs and provides a new opportunity and theoretical basis for cardiac regeneration.

Thermal transformations of perfluorooctanoic acid (PFOA): Mechanisms, volatile organofluorine emissions, and implications to thermal regeneration of granular activated carbon.

Thermal treatment is effective for the removal of perfluorooctanoic acid (PFOA). However, how temperatures, heating methods, and granular activated carbon (GAC) influence pyrolysis of PFOA, and emission risks are not fully understood. We studied thermal behaviors of PFOA at various conditions and analyzed gaseous products using real-time detection technologies and gas chromatography-mass spectrometry (GC-MS). The thermal decomposition of PFOA is surface-mediated. On the surface of quartz, PFOA decomposed into perfluoro-1-heptene and perfluoro-2-heptene, while on GAC, it tended to decompose into 1 H-perfluoroheptane (C7HF15). Neutral PFOA started evaporating around 100 â„ƒ without decomposition in ramp heating. During pyrolysis, when PFOA was pre-adsorbed onto GAC, it was mineralized into SiF4 and produced more than 45 volatile organic fluorine (VOF) byproducts, including perfluorocarbons (PFCs) and hydrofluorocarbons (HFCs). The VOF products were longer-chain (hydro)fluorocarbons (C4-C7) at low temperatures (< 500 â„ƒ) and became shorter-chain (C1-C4) at higher temperatures (> 600 â„ƒ). PFOA transformations include decarboxylation, VOF desorption, further organofluorine decomposition and mineralization in ramp heating of PFOA-laden GAC. Decarboxylation initiates at 120 â„ƒ, but other processes require higher temperatures (>200 â„ƒ). These results offer valuable information regarding the thermal regeneration of PFAS-laden GAC and further VOF control with the afterburner or thermal oxidizer.

Development and external validation of a novel modality for rapid recognition of aortic dissection based on peripheral pulse oximetry waveforms.

BACKGROUND: Aortic dissection (AD) is a life-threatening cardiovascular emergency that is often misdiagnosed as other chest pain conditions. Physiologically, AD may cause abnormalities in peripheral blood flow, which can be detected using pulse oximetry waveforms. PURPOSE: This study aimed to assess the feasibility of identifying AD based on pulse oximetry waveforms and to highlight the key waveform features that play a crucial role in this diagnostic method. METHODS: This prospective study employed high-risk chest pain cohorts from two emergency departments. The initial cohort was enriched with AD patients (n = 258, 47% AD) for model development, while the second cohort consisted of chest pain patients awaiting angiography (n = 71, 25% AD) and was used for external validation. Pulse oximetry waveforms from the four extremities were collected for each patient. After data preprocessing, a recognition model based on the random forest algorithm was trained using patients' gender, age, and waveform difference features extracted from the pulse oximetry waveforms. The performance of the model was evaluated using receiver operating characteristic (ROC) curve analysis and decision curve analysis (DCA). The importance of features was also assessed using Shapley Value and Gini importance. RESULTS: The model demonstrated strong performance in identifying AD in both the training and external validation sets. In the training set, the model achieved an area under the ROC curve of 0.979 (95% CI: 0.961-0.990), sensitivity of 0.918 (95% CI: 0.873-0.955), specificity of 0.949 (95% CI: 0.912-0.985), and accuracy of 0.933 (95% CI: 0.904-0.959). In the external validation set, the model attained an area under the ROC curve of 0.855 (95% CI: 0.720-0.965), sensitivity of 0.889 (95% CI: 0.722-1.000), specificity of 0.698 (95% CI: 0.566-0.812), and accuracy of 0.794 (95% CI: 0.672-0.878). Decision curve analysis (DCA) further showed that the model provided a substantial net benefit for identifying AD. The median mean and median variance of the four limbs' signals were the most influential features in the recognition model. CONCLUSIONS: This study demonstrated the feasibility and strong performance of identifying AD based on peripheral pulse oximetry waveforms in high-risk chest pain populations in the emergency setting. The findings also provided valuable insights for future human fluid dynamics simulations to elucidate the impact of AD on blood flow in greater detail.

[Cerebellar ferroptosis of hypertension mice following lead exposure].

OBJECTIVE: Exploring the changes in cerebellar ferroptosis in hypertensive mice after lead exposure. METHODS: Twenty-five healthy C57 male mice were selected to construct a hypertensive model by intraperitoneal injection of angiotensin II(Ang II) at a concentration of 0.05 mg/kg for 7 consecutive days. After a systolic blood pressure of 140 mmHg, 20 hypertensive mice were randomly divided into a hypertensive control group and a hypertensive lead exposure group. Twenty C57 mice with normal blood pressure were randomly divided into a blood pressure normal control group and a blood pressure normal lead exposure group. The mice in the normal blood pressure control group and the hypertensive control group drank water freely. Mice in the lead exposure group with normal blood pressure and the lead exposure group with hypertension drank lead acetate water containing 250 mg/L. Ang II was injected intraperitoneally every two days in the hypertensive control group and hypertensive lead exposed group mice. Each group of mice was poisoned for 12 weeks. Using open field experiments and balance beam experiments to detect motor dysfunction in mice. Using a reagent kit to detect the levels of divalent iron(Fe~(2+)), malondialdehyde(MDA), and glutathione(GSH) in the cerebellum of different groups of mice. Western blot was used to determine the protein expression of member 11 of the solute carrier family 7(SLC7A11), glutathione peroxidase 4(GPX4), nuclear receptor coactivator 4(NCOA4), microtubule associated protein 1 light chain 3B(LC3B), and ferritin heavy chain 1(FTH1) in mouse cerebellar tissue. RESULTS: The result of the open field experiment showed that the activity distance(1013.04 cm) of mice in the hypertensive lead exposure group was significantly lower than that of the hypertensive control group(1351.18 cm) and the lead exposure group with normal blood pressure(1287.35 cm). And the lead exposure group with hypertension also extended the time through the balance beam, which was 29.40 seconds(P<0.05). In addition, the Fe~(2+)content in the cerebellum of mice in the hypertensive lead exposure group was 3.33 µmol/g prot, which was 1.54 times that of the hypertensive control group and 1.14 times that of the lead exposure group with normal blood pressure. The MDA content was 4.71 nmol/mg prot, higher than that of the hypertensive control group and the lead exposure group with normal blood pressure. The GSH content was 5.36 µmol/g prot, lower than that of the hypertensive control group and the lead exposure group with normal blood pressure(P<0.05). Western blot result showed that compared with the hypertensive control group and the lead exposure group with normal blood pressure, the protein expression of SLC7A11 and GPX4 in the hypertensive lead exposure group was significantly reduced(P<0.05). In addition, compared with the control group with normal blood pressure, the expression of NCOA4 and LC3B proteins in the cerebellum of mice in the hypertension control group and lead exposure group with normal blood pressure increased, while the expression of FTH1 protein decreased(P<0.05). The expression of NCOA4 and LC3B proteins in the hypertensive lead exposure group was higher than that in the hypertensive control group and the lead exposure group with normal blood pressure, while the expression of FTH1 protein decreased(P<0.05). CONCLUSION: Lead exposure can exacerbate iron death in the cerebellar tissue of hypertensive mice, and iron autophagy may be involved in its occurrence and development.

Simulation of hexavalent chromium removal by electrocoagulation using iron anode in flow-through reactor.

An electrocoagulation (EC) model is developed for hexavalent chromium reduction and precipitation, using iron electrodes. Parallel removal mechanisms such as adsorption of chromium on ferrihydrite and direct reduction at the cathode is assumed negligible due to low concentration of Cr(VI). The reaction model presented for batch system represents species complexation, precipitation/dissolution, acid/base, and oxidation-reduction reactions. Batch reactor simulation is verified using experimental data obtained by Sarahney et al. (2012), where the effect of initial chromium concentration, pH, volumetric current density, and ionic strength is considered (Sarahney et al., 2012). The model couples multicomponent ionic transport in MATLAB with chemical reaction model in PHREEQC, as a widely used computational programming tool and a geochemical reaction simulator with comprehensive geochemistry databases. The suggested current density is 0.05-0.3mA/cm2 and the surface to volume ratio in batch reactor is considered 0.017 1/cm. Design parameters are presented for operation of a flow-through hexavalent chromium removal using electrocoagulation by iron electrode to treat Cr(VI) in range of 10-50 mg/L. The operational parameters for a flow-through EC reactor for Cr(VI) removal is suggested to follow [Formula: see text] .

RSVP-based BCI for inconspicuous targets: detection, localization, and modulation of attention.

Objective.While brain-computer interface (BCI) based on rapid serial visual presentation (RSVP) is widely used in target detection, patterns of event-related potential (ERP), as well as the performance on detecting inconspicuous targets remain unknown. Moreover, participant-screening methods to excluded 'BCI-blind' users are still lacking.Approach.A RSVP paradigm was designed with targets of varied concealment, size, and location. ERPs (e.g. P300 and N2pc) and target detection accuracy were compared among these conditions. The relationship between participants' attention scores and target detection accuracy was also analyzed to test attention level as a criterion for participant screening.Main results.Statistical analysis showed that the conditions of target concealment and size significantly influenced ERP. In particular, ERP for inconspicuous targets, such as concealed and small targets, exhibited lower amplitudes and longer latencies. In consistent, the accuracy of detection in inconspicuous condition was significantly lower than that of conspicuous condition. In addition, a significant association was found between attention scores and target detection accuracy for camouflaged targets.Significance.The study was the first to address ERP features among multiple dimensions of concealment, size, and location. The conclusion provided insights into the relationship between ERP decoding and properties of targets. In addition, the association between attention scores and detection accuracy implied a promising method in screening well-behaved participants for camouflaged target detection.

Diamond-Reinforced Al(H2PO4)3@Epoxy Hybrid Thermal Adhesive With Ultra-High Thermal Conductivity and Bonding Strength.

The miniaturization, integration, and increased power of electronic devices have exacerbated serious heat dissipation issues. Thermally conductive adhesives, which effectively transfer heat and firmly bond components, are critical for addressing these challenges. This paper innovatively proposed a composite comprising inorganic phosphate/alumina as a matrix and diamond as filler. The composite achieved an isotropic thermal conductivity (TC) of up to 18.96 W m-1 K-1, significantly surpassing existing reports while maintaining electrical insulation. First-principles calculations and experimental tests confirmed that the high TC of phosphate and excellent interface contact ensured efficient heat transfer. To optimize bonding performance, a modified-diamond/Al(H2PO4)3@epoxy hybrid composite is subsequently developed using an organic modification method. The unique hybrid structure, combining inorganic thermal pathways and an organic adhesive network, enabled the hybrid composite to simultaneously possess a high TC (3.23 W m-1 K-1) and strong adhesion (14.35 MPa). Compared to previous reports, the comprehensive performance of this hybrid thermally conductive adhesive is exceptionally remarkable. The superior heat dissipation capability of the hybrid thermal adhesive is demonstrated in chip cooling scenarios. This organic/inorganic hybrid approach offered a new direction for obtaining advanced thermal interface materials, demonstrating significant application potential in chip soldering, packaging, and heat dissipation.

PFAS remediation: Evaluating the infrared spectra of complex gaseous mixtures to determine the efficacy of thermal decomposition of PFAS.

Due to their widespread production and known environmental contamination, the need for the detection and remediation of per- and polyfluoroalkyl substances (PFAS) has grown quickly. While destructive thermal treatment of PFAS at low temperatures (e.g., 200-500 °C) is of interest due to lower energy and infrastructure requirements, the range of possible degradation products remains underexplored. To better understand the low temperature decomposition of PFAS species, we have coupled gas-phase infrared spectroscopy with a multivariate curve resolution (MCR) analysis and a database of high-resolution PFAS infrared reference spectra to characterize and quantify a complex mixture resulting from potassium perfluorooctanesulfonate (PFOS-K) decomposition. Beginning at 375 °C, nine prevalent decomposition products (namely smaller perfluorocarbon species) are identified and quantified.

Validamycin A Inhibited FB1 Biosynthesis by the Target FvNth in Fusarium verticillioides.

Validamycin A (VMA) is an antifungal antibiotic derived from Streptomyces hygroscopicus commonly used in plant disease management. Surprisingly, VMA was discovered to impede the production of fumonisin B1 (FB1) in agricultural settings. However, the specific target of VMA in Fusarium verticillioides remained unclear. To unravel the molecular mechanism of VMA, ultrastructural observations unveiled damage to mitochondrial membranes. Trehalase (FvNth) was pinpointed as the target of VMA by utilizing a 3D-printed surface plasmon resonance sensor. Molecular docking identified Trp285, Arg447, Asp452, and Phe665 as the binding sites between VMA and FvNth. A ΔFvnth mutant lacking amino acids 250-670 was engineered through homologous recombination. Transcriptome analysis indicated that samples treated with VMA and ΔFvnth displayed similar expression patterns, particularly in the suppression of the FUM gene cluster. VMA treatment resulted in reduced trehalase and ATPase activity as well as diminished production of glucose, pyruvic acid, and acetyl-CoA. Conversely, these effects were absent in samples treated with ΔFvnth. This research proposes that VMA hinders acetyl-CoA synthesis by trehalase, thereby suppressing the FB1 biosynthesis. These findings present a novel target for the development of mycotoxin control agents.

Celastrol Regulates the Hsp90-NLRP3 Interaction to Alleviate Rheumatoid Arthritis.

Previous studies have verified that celastrol (Cel) protects against rheumatoid arthritis (RA) by inhibiting the NLRP3 inflammasome signaling pathway, but the molecular mechanism by which Cel regulates NLRP3 has not been clarified. This study explored the specific mechanisms of Cel in vitro and in vivo. A type II collagen-induced arthritis (CIA) mouse model was used to study the antiarthritic activity of Cel; analysis of paw swelling, determination of the arthritis score, and pathological examinations were performed. The antiproliferative and antimigratory effects of Cel on TNF-α induced fibroblast-like synoviocytes (FLSs) were tested. Proinflammatory factors were evaluated using enzyme-linked immunosorbent assay (ELISA). The expression of NF-κB/NLRP3 pathway components was determined by western blotting and immunofluorescence staining in vitro and in vivo. The putative binding sites between Cel and Hsp90 were predicted through molecular docking, and the binding interactions were determined using the Octet RED96 system and coimmunoprecipitation. Cel decreased arthritis severity and reduced TNF-α-induced FLSs migration and proliferation. Additionally, Cel inhibited NF-κB/NLRP3 signaling pathway activation, reactive oxygen species (ROS) production, and proinflammatory cytokine secretion. Furthermore, Cel interacted directly with Hsp90 and blocked the interaction between Hsp90 and NLRP3 in FLSs. Our findings revealed that Cel regulates NLRP3 inflammasome signaling pathways both in vivo and in vitro. These effects are induced through FLSs inhibition of the proliferation and migration by blocking the interaction between Hsp90 and NLRP3.

Removal of PFAS by hydrotalcite: Adsorption mechanisms, effect of adsorbent aging, and thermal regeneration.

Layered double hydroxides (LDH) have been shown to be effective adsorbents, but their utility for the treatment of per- and polyfluoroalkyl substances (PFAS) in water has not been fully explored. In this study, the adsorption of 9 PFAS on hydrotalcite (HT), a type of LDH, was investigated using reaction solutions with environmentally relevant PFAS concentrations. The adsorption of individual PFAS by HT depended upon a range of factors, including the temperature used to pre-treat (i.e., calcine) the HT, aging conditions, and the presence of anions in the solution. HT calcined near 400 °C most effectively adsorbed PFAS, but its ability to adsorb PFAS was sensitive to storage conditions. The adsorption of CO2 and moisture from air, which likely resulted in the re-intercalation of CO32- into the interlayer regions of HT, was observed to reduce PFAS adsorption and may explain performance loss over time. The adsorption trend among 9 PFAS and the influence on this process by Cl-, NO3-, SO42-, and CO32- indicated that adsorption occurred via a combination of ion exchange, electrostatic attraction, and hydrophobic interactions, although the relative importance of each mechanism deserves further investigation. During this study, we also demonstrated for the first time that HT can be thermally regenerated at 400 °C without affecting its ability to adsorb PFOS and PFBA. Overall, our results suggest that HT may serve as an effective alternative for PFAS treatment.

2D Tungsten Borides Induced Interfacial Modulation Engineering Toward High-Rate Performance Zinc-Iodine Battery.

Aqueous zinc-iodine batteries are promising candidates for large-scale energy storage due to their high energy density and low cost. However, their development is hindered by several drawbacks, including zinc dendrites, anode corrosion, and the shuttle of polyiodides. Here, the design of 2D-shaped tungsten boride nanosheets with abundant borophene subunits-based active sites is reported to guide the (002) plane-dominated deposition of zinc while suppressing side reactions, which facilitates interfacial nucleation and uniform growth of zinc. Meanwhile, the interfacial d-band orbits of tungsten sites can further enhance the anchoring of polyiodides on the surface, to promote the electrocatalytic redox conversion of iodine. The resulting tungsten boride-based I2 cathodes in zinc-iodine cells exhibit impressive cyclic stability after 5000 cycles at 50 C, which accelerates the practical applications of zinc-iodine batteries.

FvOshC Is a Key Global Regulatory Target in Fusarium verticillioides for Fumonisin Biosynthesis and Disease Control.

Fusarium verticillioides has a substantial impact on maize production, commonly leading to maize ear rot and the production of fumonisin, a mycotoxin that poses health risks to both humans and animals. Currently, there is a lack of molecular targets for preventing the disease and controlling the toxin. The biological functions of oxysterol-binding proteins (OSBP) in filamentous fungi remain unclear. In this research, 7 oxysterol-binding protein-related proteins were identified in F. verticillioides, and these proteins were obtained through prokaryotic expression and purification. FvOshC was identified as the specific protein that binds to ergosterol through fluorescence titration. Gene knockout complementation techniques confirmed that FvOSHC plays a positive role, establishing it as a novel global regulatory protein involved in the pathogenicity and FB1 biosynthesis in F. verticillioides. Additionally, the interaction between FvOshC and FvSec14 was identified using yeast two-hybrid techniques. Moreover, computer-aided drug design technology was utilized to identify the receptor molecule Xanthatin based on FvOshC. The inhibitory effect of Xanthatin on the growth of F. verticillioides and the synthesis of FB1 was significantly demonstrated. These findings provide valuable insights that can aid in the management of mycotoxin pollution.

Psb28 protein is indispensable for stable accumulation of PSII core complexes in Arabidopsis.

Enhancing the efficiency of photosynthesis represents a promising strategy to improve crop yields, with keeping the steady state of PSII being key to determining the photosynthetic performance. However, the mechanisms whereby the stability of PSII is maintained in oxygenic organisms remain to be explored. Here, we report that the Psb28 protein functions in regulating the homeostasis of PSII under different light conditions in Arabidopsis thaliana. The psb28 mutant is much smaller than the wild-type plants under normal growth light, which is due to its significantly reduced PSII activity. Similar defects were seen under low light and became more pronounced under photoinhibitory light. Notably, the amounts of PSII core complexes and core subunits are specifically decreased in psb28, whereas the abundance of other representative components of photosynthetic complexes remains largely unaltered. Although the PSII activity of psb28 was severely reduced when subjected to high light, its recovery from photoinactivation was not affected. By contrast, the degradation of PSII core protein subunits is dramatically accelerated in the presence of lincomycin. These results indicate that psb28 is defective in the photoprotection of PSII, which is consistent with the observation that the overall NPQ is much lower in psb28 compared to the wild type. Moreover, the Psb28 protein is associated with PSII core complexes and interacts mainly with the CP47 subunit of PSII core. Taken together, these findings reveal an important role for Psb28 in the protection and stabilization of PSII core in response to changes in light environments.

Overexpression of wild-type HRAS drives non-alcoholic steatohepatitis to hepatocellular carcinoma in mice.

Hepatocellular carcinoma (HCC), a prevalent solid carcinoma of significant concern, is an aggressive and often fatal disease with increasing global incidence rates and poor therapeutic outcomes. The etiology and pathological progression of non-alcoholic steatohepatitis (NASH)-related HCC is multifactorial and multistage. However, no single animal model can accurately mimic the full NASH-related HCC pathological progression, posing considerable challenges to transition and mechanistic studies. Herein, a novel conditional inducible wild-type human HRAS overexpressed mouse model (HRAS-HCC) was established, demonstrating 100% morbidity and mortality within approximately one month under normal dietary and lifestyle conditions. Advanced symptoms of HCC such as ascites, thrombus, internal hemorrhage, jaundice, and lung metastasis were successfully replicated in mice. In-depth pathological features of NASH- related HCC were demonstrated by pathological staining, biochemical analyses, and typical marker gene detections. Combined murine anti-PD-1 and sorafenib treatment effectively prolonged mouse survival, further confirming the accuracy and reliability of the model. Based on protein-protein interaction (PPI) network and RNA sequencing analyses, we speculated that overexpression of HRAS may initiate the THBS1-COL4A3 axis to induce NASH with severe fibrosis, with subsequent progression to HCC. Collectively, our study successfully duplicated natural sequential progression in a single murine model over a very short period, providing an accurate and reliable preclinical tool for therapeutic evaluations targeting the NASH to HCC continuum.

Electrical Sensor Calibration by Fuzzy Clustering with Mandatory Constraint.

Electrical tomography sensors have been widely used for pipeline parameter detection and estimation. Before they can be used in formal applications, the sensors must be calibrated using enough labeled data. However, due to the high complexity of actual measuring environments, the calibrated sensors are inaccurate since the labeling data may be uncertain, inconsistent, incomplete, or even invalid. Alternatively, it is always possible to obtain partial data with accurate labels, which can form mandatory constraints to correct errors in other labeling data. In this paper, a semi-supervised fuzzy clustering algorithm is proposed, and the fuzzy membership degree in the algorithm leads to a set of mandatory constraints to correct these inaccurate labels. Experiments in a dredger validate the proposed algorithm in terms of its accuracy and stability. This new fuzzy clustering algorithm can generally decrease the error of labeling data in any sensor calibration process.

PSAEEGNet: pyramid squeeze attention mechanism-based CNN for single-trial EEG classification in RSVP task.

Introduction: Accurate classification of single-trial electroencephalogram (EEG) is crucial for EEG-based target image recognition in rapid serial visual presentation (RSVP) tasks. P300 is an important component of a single-trial EEG for RSVP tasks. However, single-trial EEG are usually characterized by low signal-to-noise ratio and limited sample sizes. Methods: Given these challenges, it is necessary to optimize existing convolutional neural networks (CNNs) to improve the performance of P300 classification. The proposed CNN model called PSAEEGNet, integrates standard convolutional layers, pyramid squeeze attention (PSA) modules, and deep convolutional layers. This approach arises the extraction of temporal and spatial features of the P300 to a finer granularity level. Results: Compared with several existing single-trial EEG classification methods for RSVP tasks, the proposed model shows significantly improved performance. The mean true positive rate for PSAEEGNet is 0.7949, and the mean area under the receiver operating characteristic curve (AUC) is 0.9341 (p < 0.05). Discussion: These results suggest that the proposed model effectively extracts features from both temporal and spatial dimensions of P300, leading to a more accurate classification of single-trial EEG during RSVP tasks. Therefore, this model has the potential to significantly enhance the performance of target recognition systems based on EEG, contributing to the advancement and practical implementation of target recognition in this field.

Auriculocondylar syndrome 2 caused by a novel PLCB4 variant in a male Chinese neonate: A case report and review of the literature.

BACKGROUND: Auriculocondylar syndrome (ARCND) is a rare congenital craniofacial developmental malformation syndrome of the first and second pharyngeal arches with external ear malformation at the junction between the lobe and helix, micromaxillary malformation, and mandibular condylar hypoplasia. Four subtypes of ARCND have been described so far, that is, ARCND1 (OMIM # 602483), ARCND2 (ARCND2A, OMIM # 614669; ARCND2B, OMIM # 620458), ARCND3 (OMIM # 615706), and ARCND4 (OMIM # 620457). METHODS: This study reports a case of ARCND2 resulting from a novel pathogenic variant in the PLCB4 gene, and summarizes PLCB4 gene mutation sites and phenotypes of ARCND2. RESULTS: The proband, a 5-day-old male neonate, was referred to our hospital for respiratory distress. Micrognathia, microstomia, distinctive question mark ears, as well as mandibular condyle hypoplasia were identified. Trio-based whole-exome sequencing identified a novel missense variant of NM_001377142.1:c.1928C>T (NP_001364071.1:p.Ser643Phe) in the PLCB4 gene, which was predicted to impair the local structural stability with a result that the protein function might be affected. From a review of the literature, only 36 patients with PLCB4 gene mutations were retrieved. CONCLUSION: As with other studies examining familial cases of ARCND2, incomplete penetrance and variable expressivity were observed within different families' heterozygous mutations in PLCB4 gene. Although, motor and intellectual development are in the normal range in the vast majority of patients with ARCND2, long-term follow-up and assessment are still required.

A composite hydrogel loaded with the processed pyritum promotes bone repair via stimulate the osteogenic differentiation of BMSCs.

Tissue engineering shows promise in repairing extensive bone defects. The promotion of proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) by biological scaffolds has a significant impact on bone regeneration outcomes. In this study we used an injectable hydrogel, known as aminated mesoporous silica gel composite hydrogel (MSNs-NH2@GelMA), loaded with a natural drug, processed pyritum (PP), to promote healing of bone defects. The mechanical properties of the composite hydrogel were significantly superior to those of the blank hydrogel. In vitro experiments revealed that the composite hydrogel stimulated the osteogenic differentiation of BMSCs, and significantly increased the expression of type I collagen (Col 1), runt-related transcription factor 2 (Runx 2), alkaline phosphatase (ALP), osteocalcin (OCN). In vivo experiments showed that the composite hydrogel promoted the generation of new bones. These findings provide evidence that the composite hydrogel pyritum-loaded holds promise as a biomaterial for bone repair.