The Remarkable Role of Indium in Synergistically Optimizing Carrier Concentration and Phase Distribution of AgCuTe-Based Materials.

Carrier regulation has proven to be an effective approach for optimizing the thermoelectric performance of materials. One common method to adjust the carrier concentration is through element doping. In the case of AgCuTe-based materials, it tends to form with cation vacancies, resulting in a high hole concentration and complex phase composition at low temperatures, which also hinders material stability. However, this also offers additional opportunities to manipulate the carrier concentration. In this study, the improved performance of AgCuTe through indium doping is reported, which leads to a reduction in hole concentration. In combination with a significant increase in the effective mass of the carriers, the enhanced Seebeck coefficient is also realized. Particularly, a notable improvement in power factor is observed in the hexagonal phase near room temperature. Furthermore, a lower electron thermal conductivity is achieved, contributing to an average figure of merit value of ≈1.21 (between 523 and 723 K). Additionally, the presence of indium inhibits the formation of the second phase and ensures a homogeneous phase distribution, which reduces the instability arising from phase transition. This work significantly enhances the potential of AgCuTe-based materials for low to medium-temperature applications.

Enhanced Interfacial and Dielectric Performance for Polyetherimide Nanocomposites through Tailoring Shell Polarities.

Polyimide (PI) and its derivative polyetherimide (PEI) have been widely investigated as promising candidates for dielectric energy storage due to their excellent intrinsic features. However, most of the current research for PI- or PEI-based dielectric nanocomposites only focuses on a certain polar group contained in a dianhydride monomer, while there are very few studies on exploring the effect of a series of polar groups derived from various dianhydride monomers on the dielectric properties of nanocomposites. To fill this gap, we herein fabricated and investigated a series of novel hyperbranched polyimides grafted on barium titanate nanoparticles (HBPI@BT) using different dianhydride monomers and their nanocomposites with the PEI matrix. The results showed that sophisticated hyperbranched structures effectively alleviated the incompatibility between fillers and the matrix, thus significantly improving the bonding energy of nanocomposites, especially for HBPI-S@BT/PEI (797.7 kJ/mol). The Ud of HBPI-S@BT/PEI reached 8.38 J/cm3, which is 3.3 times higher than that of pure PEI. The HBPI-F@BT/PEI nanocomposites achieved high breakdown strength (∼500 MV/m) and low dielectric loss (0.008) simultaneously. The dielectric constants of HBPI@BT/PEI nanocomposites remained at a stable level from 25 to 150 °C. This work provides us promising hyperbranched structured materials for potentially advanced dielectric applications such as field effect transistors.

Hierarchically Assembling CoFe Prussian Blue Analogue Nanocubes on CoP Nanosheets as Highly Efficient Electrocatalysts for Overall Water Splitting.

Efficient and durable electrocatalysts are highly desirable for overall water splitting. Herein, a facile strategy is demonstrated to rationally construct CoFe Prussian blue analogues (PBA)@CoP cube-on-sheet hierarchical structure by etching reaction with intermediated CoO to form PBA nanocubes. Benefitting from the heterostructured engineering, the as-synthesized CoFe PBA@CoP presents remarkable electrocatalytic performance in 1.0 m KOH, only requiring overpotentials of 100 mV for hydrogen evolution reaction (HER) and 171 mV for oxygen evolution reaction (OER) to reach the 10 mA cm-2 current density with good stability. Extraordinarily enhanced electrocatalytic performance is ascribed to not only the rapid charge transfer of active species, but also the synergistic effect between each component to achieve tuned electronic structure and abundant electrocatalytic active sites. Especially, the assembled two-electrode cell using CoFe PBA@CoP as both cathode and anode delivers the current densities of 10 mA cm-2 at a relatively low cell voltage of 1.542 V, outperforming most of low-cost bifunctional electrocatalysts reported to date. The controllable and versatile strategy will open up an avenue to prepare hybrid films for advanced electrochemical energy storage and conversion.

Microsatellite analysis of genetic variation and population genetic differentiation in autotetraploid and diploid rice.

Genetic diversity and population genetic structure of autotetraploid and diploid populations of rice collected from Chengdu Institute of Biology, Chinese Academy of Sciences, were studied based on 36 microsatellite loci. Among 50 varieties, a moderate to high level of genetic diversity was observed at the population level, with the number of alleles per locus (Ae) ranging from 2 to 6 (mean 3.028) and polymorphism information content ranging from 0.04 to 0.76 (mean 0.366). The expected heterozygosity (He) varied from 0.04 to 0.76 (mean 0.370) and Shannon's index (I) from 0.098 to 1.613 (mean 0.649). The autotetraploid populations showed slightly higher levels of Ae, He, and I than the diploid populations. Rare alleles were observed at most of the simple sequence repeat loci in one or more of the 50 accessions, and a core fingerprint database of the autotetraploid and diploid rice was constructed. The F-statistics showed genetic variability mainly among autotetraploid populations rather than diploid populations (Fst = 0.066). Cluster analysis of the 50 accessions showed four major groups. Group I contained all of the autotetraploid and diploid indica maintainer lines and an autotetraploid and its original diploid indica male sterile lines. Group II contained only the original IR accessions. Group III was more diverse than either Group II or Group IV, comprising both autotetraploid and diploid indica restoring lines. Group IV included a japonica cluster of the autotetraploid and diploid rices. Furthermore, genetic differences at the single-locus and two-locus levels, as well as components due to allelic and gametic differentiation, were revealed between autotetraploid and diploid varieties. This analysis indicated that the gene pools of diploid and autotetraploid rice were somewhat dissimilar, as variation exists that distinguishes autotetraploid from diploid rices. Using this variation, we can breed new autotetraploid varieties with some important agricultural characters that were not found in the original diploid rice varieties.