RESUMEN
Porphyrins are widely used as potential nonlinear optical (NLO) materials because of their highly delocalized π electrons and feasible synthesis and functionalization with broad biological applications. A variety of linear and cyclic porphyrin derivatives have been synthesized, and the correlation between their structures and NLO properties awaits being disclosed. In this work, the electronic structures and third-order NLO properties of linear and cyclic butadiyne-linked zinc porphyrin oligomers have been studied by quantum chemical methods and sum-over-states model. The static second hyperpolarizability (<γ0>) increases exponentially with the number of zinc porphyrin units ([<γ0>n] = 0.67[<γ0>1]n2.63, n = 2 â¼ 6) in linear π-conjugated oligomers, and the <γ0> of the linear hexamer is about 74 times that of the monomer. Such enhancement of <γ0> in linear oligomers originates from closely-lying frontier molecular orbitals available for low energy electron excitations and strong charge transfer-based excitations across porphyrins. The <γ0>s of cyclic porphyrins are lower than that of the linear hexamer, though the interaction between the ring and the ligand enhances the <γ0> of some cyclic zinc porphyrin complexes. The large two-photon absorption cross sections confer on these zinc porphyrin derivatives excellent candidates for two-photon absorption applications.
RESUMEN
Nanoconfined catalysts enhance stabilization of reaction intermediates, facilitate electron transfer, and safeguard active centers, leading to superior electrocatalytic activity, particularly in CO2 reduction reactions (CO2RR). Despite their effectiveness, crafting nanoconfined catalysts is challenging due to unclear formation mechanisms. In this study, we introduce an electrochemical method to grow Pd clusters within the interlayers of two-dimensional black phosphorus, creating Pd cluster-intercalated black phosphorus (Pd-i-BP) as an electrocatalyst. Using in situ electrochemical liquid phase transmission electron microscopy (EC-TEM), we revealed the synthesis mechanism of Pd-i-BP, involving electrochemically driven Pd ion intercalation followed by reduction within the BP layers. The Pd-i-BP electrocatalyst exhibits exemplary CO2-to-formate conversion, achieving 90% Faradaic efficiency for formate production, owing to its distinct nanoconfined structure that stabilizes intermediates and enhances electron transfer. Density functional theory (DFT) calculations underscore the structural benefits for enhancing intermediate adsorption and catalyzing the reaction. Our insights deepen understanding of nanoconfined material synthesis, promising advanced, high-efficiency catalysts.
RESUMEN
Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb5+ element, a synchronous surface-to-bulk-modified LiCoO2 featuring Li3 NbO4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li+ diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg-1 and 4.7 V-class 550 Wh kg-1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials.
RESUMEN
Push-pull π-conjugated molecules are one of the paradigms of second order nonlinear optical (NLO) materials and have been extensively explored. However, high-performance second order NLO materials with an optimum electron donor (D), π-bridge (π) and acceptor (A) under this paradigm are still the most sought-after. In the present work, D-π-A molecules with optimal D, π and A combination for strong second order NLO properties are proposed based on molecular orbital theories. The optimal D-π-A push-pull molecule achieves an unprecedentedly strong NLO response under the D-π-A paradigm, i.e., the static first hyperpolarizability reaches -453.92 × 10-30 esu per heavy atom using azulene as part of the π-bridge and acceptor to synergistically reinforce the strength of the acceptor. The protocols of D-π-A NLO molecule design through frontier molecular orbital matching of D, π and A with optimal combination of electron donating and accepting strengths shed light on future molecular NLO materials exploration. The simulated two-dimensional second order spectra provide useful information (e.g., sum frequency generation) on the applications of those D-π-A push-pull molecules in nonlinear optics.
RESUMEN
Benefiting from high energy density (2,600 Wh kg-1) and low cost, lithium-sulfur (Li-S) batteries are considered promising candidates for advanced energy-storage systems1-4. Despite tremendous efforts in suppressing the long-standing shuttle effect of lithium polysulfides5-7, understanding of the interfacial reactions of lithium polysulfides at the nanoscale remains elusive. This is mainly because of the limitations of in situ characterization tools in tracing the liquid-solid conversion of unstable lithium polysulfides at high temporal-spatial resolution8-10. There is an urgent need to understand the coupled phenomena inside Li-S batteries, specifically, the dynamic distribution, aggregation, deposition and dissolution of lithium polysulfides. Here, by using in situ liquid-cell electrochemical transmission electron microscopy, we directly visualized the transformation of lithium polysulfides over electrode surfaces at the atomic scale. Notably, an unexpected gathering-induced collective charge transfer of lithium polysulfides was captured on the nanocluster active-centre-immobilized surface. It further induced an instantaneous deposition of nonequilibrium Li2S nanocrystals from the dense liquid phase of lithium polysulfides. Without mediation of active centres, the reactions followed a classical single-molecule pathway, lithium polysulfides transforming into Li2S2 and Li2S step by step. Molecular dynamics simulations indicated that the long-range electrostatic interaction between active centres and lithium polysulfides promoted the formation of a dense phase consisting of Li+ and Sn2- (2 < n ≤ 6), and the collective charge transfer in the dense phase was further verified by ab initio molecular dynamics simulations. The collective interfacial reaction pathway unveils a new transformation mechanism and deepens the fundamental understanding of Li-S batteries.
RESUMEN
In sodium-ion batteries (SIBs), the low initial coulombic efficiency (ICE) is commonly induced by irreversible phase conversion and difficult desodiation, especially on transition metal compounds (TMCs). Yet the underlying physicochemical mechanism of poor reaction reversibility is still a controversial issue. Herein, by using in situ transmission electron microscopy and in situ X-ray diffraction, we demonstrate the irreversible conversion of NiCoP@C is caused by the rapid migration of P in carbon layer and preferential formation of isolated Na3 P during discharge. By modifying the carbon coating layer, the migration of Ni/Co/P atoms is inhibited, thus the improvement of ICE and cycle stability is realized. The inhibiting of fast atom migration which induces component separation and rapid performance degradation might be applied to a wide range of electrode materials, and guides the development of advanced SIBs.
RESUMEN
Cathode electrolyte interphase (CEI) layers derived from electrolyte oxidative decomposition can passivate the cathode surface and prevent its direct contact with electrolyte. The inorganics-dominated inner solid electrolyte layer (SEL) and organics-rich outer quasi-solid-electrolyte layer (qSEL) constitute the CEI layer, and both merge at the junction without a clear boundary, which assures the CEI layer with both ionic-conducting and electron-blocking properties. However, the typical "wash-then-test" pattern of characterizations aiming at the microstructure of CEI layers would dissolve the qSEL and even destroy the SEL, leading to an overanalysis of electrolyte decomposition pathway and misassignment of CEI architecture (e.g., component and morphology). In this study, we established a full-dimensional characterization paradigm (combining Fourier transform infrared, solution NMR, X-ray photoelectron spectroscopy, and mass spectrometry technologies) and reconstructed the original CEI layer model. Besides, the feasibility of this characterization paradigm has been verified in a wide operating voltage range on a typical LiNixMnyCozO2 cathode.
RESUMEN
Li metal batteries (LMBs) reveal great application prospect in next-generation energy storage, because of their high energy density and low electrochemical potential, especially when paired with elemental sulfur and oxygen cathodes. Complex interfacial reactions have long been a big concern because of the elusive formation/dissolution of Li metal at the solid-electrolyte interface (SEI) layer, which leads to battery degradation under practical operating conditions. To precisely track the reactions at the electrode/electrolyte interfaces, in the past ten years, high spatio-temporal resolution, in situ electrochemical transmission electron microscopy (EC-TEM) has been developed. A preliminary understanding of the structural and chemical variation of Li metal during nucleation/growth and SEI layer formation has been obtained. In this perspective, we give a brief introduction of liquid cell development. Then, we comparably discuss the different configurations of EC-TEM based on open-cell and liquid-cell, and focus on the recent advances of liquid-cell EC-TEM and its investigation in the electrodes, electrolytes, and SEI. Finally, we present a perspective of liquid-cell EC-TEM for future LMB research.
RESUMEN
The development of electrocatalysts capable of efficient reduction of nitrate (NO3-) to ammonia (NH3) is drawing increasing interest for the sake of low carbon emission and environmental protection. Herein, we present a CuCo bimetallic catalyst able to imitate the bifunctional nature of copper-type nitrite reductase, which could easily remove NO2- via the collaboration of two active centers. Indeed, Co acts as an electron/proton donating center, while Cu facilitates NOx- adsorption/association. The bio-inspired CuCo nanosheet electrocatalyst delivers a 100 ± 1% Faradaic efficiency at an ampere-level current density of 1035 mA cm-2 at -0.2 V vs. Reversible Hydrogen Electrode. The NH3 production rate reaches a high activity of 4.8 mmol cm-2 h-1 (960 mmol gcat-1 h-1). A mechanistic study, using electrochemical in situ Fourier transform infrared spectroscopy and shell-isolated nanoparticle enhanced Raman spectroscopy, reveals a strong synergy between Cu and Co, with Co sites promoting the hydrogenation of NO3- to NH3 via adsorbed *H species. The well-modulated coverage of adsorbed *H and *NO3 led simultaneously to high NH3 selectivity and yield.
Asunto(s)
Amoníaco , Carbono , Hidrogenación , Adsorción , Nitrito ReductasasRESUMEN
The role of step sites on nanocatalysts in the electrocatalytic dechlorination reaction (ECDR) was studied using 3 Pd nanocatalysts with different densities of step sites, which decreased in the order of: tetrahexahedral Pd{310} nanocrystals (THH Pd{310} NCs) > commercial Pd nanoparticles (Pd black) > cubic Pd{100} NCs. The two well-defined Pd NCs served as model catalysts and were prepared through the electrochemical square-wave potential (SWP) method. The toxic herbicide alachlor was first employed in this study as an objective probe to determine the dechlorination performance, which was quantified by the alachlor removal (Rala), the current efficiency (CEala), and the dechlorination selectivity (Sdes). The experimental results demonstrated that the THH Pd{310} NCs with abundant step sites exhibited much higher electrocatalytic performance compared to the cubic Pd{100} NCs with terrace sites. The combination of cyclic voltammetry studies, electrochemical in situ FTIR analysis, and density functional theory (DFT) calculations revealed that the adsorbed CîO bond and generated on the step sites could lower the C-Cl bond splitting barrier, leading to a high ECDR efficiency. Other chlorinated organics with an activated carbon atom were also investigated, which revealed that the superiority of the step sites toward Cl-C bond breaking was particular to the compounds with CîO bonds. This study provides a deep understanding of high actvitiy of step sites on Pd NCs in EHDC and a strategy to improve this important environmental electrocatalysis process.
RESUMEN
A "superaerophobic" NiCo bimetallic phosphide electrocatalyst has been fabricated by employing bimetal-organic frameworks as self-sacrificing templates. An overpotential of only 205 mV can drive the HER current density to 800 mA cm-2, which is even superior to that for Pt/C. This study provides a promising approach for the development of industrialized HER electrocatalysts.