Multiple-resonance thermally activated delayed fluorescence materials based on phosphorus central chirality for efficient circularly polarized electroluminescence.

Circularly polarized organic light-emitting diodes (CP-OLEDs) hold great potential for naked-eye 3D displays, necessitating efficient chiral luminescent materials with an optimal CP luminescence (CPL) dissymmetry factor (g). Herein, we present the first chiral multiple resonance thermally activated delayed fluorescence (MR-TADF) materials containing a phosphorus chiral center by incorporating 5-phenylbenzo[b]phosphindole-5-oxide into the para-position of two MR-TADF cores. The compounds, NBOPO and NBNPO, exhibit photoluminescence peaks at 462 and 498 nm with narrow full-width at half-maximum values of 25 and 24 nm in toluene, respectively. Notably, (R/S)-NBOPO and (R/S)-NBNPO enantiomers display high quantum yields of 87% and 93% and symmetric CPL with |gPL| factors of 1.18 × 10-3 and 4.30 × 10-3, respectively, in doped films. Moreover, the corresponding CP-OLEDs show impressive external quantum efficiencies of 16.4% and 28.3%, along with symmetric CP electroluminescence spectra with |gEL| values of 7.0 × 10-4 and 1.4 × 10-3, respectively.

Efficient narrowband yellow organic light-emitting diodes based on iridium(III) complexes with the rigid indolo[3,2,1-jk]carbazole unit.

Phosphorescent material with narrowband emission is crucial for advancing wide-color-gamut organic light-emitting diodes (OLEDs). In this work, two iridium(III) complexes, (PhthzICz)2Ir(tmd) and (thzICz)2Ir(tmd), using rigid 2-(benzothiazole-2-yl)indolo[3,2,1-jk]carbazole (PhthzICz) and 2-(thiazole-2-yl)indolo[3,2,1-jk]carbazole (thzICz) as cyclometalated ligands and 2,2,6,6-tetramethyl-3,5-heptanedione (tmd) as ancillary ligands, were synthesized. When these complexes were doped into the host material 3,3'-di(9H-carbazol-9-yl)-1,1'-biphenyl, the doped films exhibited yellow photoluminescence (PL) peaking at 537 and 531 nm, full width at half maximum (FWHM) bands of 35 and 60 nm, and PL quantum yields of 89.9% and 85.9%, respectively. OLEDs based on these two emitters display moderate performance characteristics with maximum external quantum efficiencies of 25.2% and 22.7%. Notably, the device based on (PhthzICz)2Ir(tmd) exhibits a narrow FWHM of 31 nm. Overall, the study highlights the practicality of incorporating rigid groups into the cyclometalated ligands of Ir(III) complexes as a viable strategy for achieving efficient Ir(III) complexes for OLEDs with narrow emission and high efficiency.

Tetraborated Intrinsically Axial Chiral Multi-resonance Thermally Activated Delayed Fluorescence Materials.

Chiral multi-resonance thermally activated delayed fluorescence (CP-MR-TADF) materials hold promise for circularly polarized organic light-emitting diodes (CP-OLEDs) and 3D displays. Herein, we present two pairs of tetraborated intrinsically axial CP-MR-TADF materials, R/S-BDBF-BOH and R/S-BDBT-BOH, with conjugation-extended bidibenzo[b,d]furan and bidibenzo[b,d]thiophene as chiral sources, which effectively participate in the distribution of the frontier molecular orbitals. Due to the heavy-atom effect, sulfur atoms are introduced to accelerate the reverse intersystem crossing process and increase the efficiency of molecules. R/S-BDBF-BOH and R/S-BDBT-BOH manifest ultra-pure blue emission with a maximum at 458/459 nm with a full width at half maximum of 27 nm, photoluminescence quantum yields of 90 %/91 %, and dissymmetry factors (|gPL|) of 6.8×10-4/8.5×10-4, respectively. Correspondingly, the CP-OLEDs exhibit good performances with an external quantum efficiency of 30.1 % and |gEL| factors of 1.2×10-3.

Recent progress in multi-resonance thermally activated delayed fluorescence emitters with an efficient reverse intersystem crossing process.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters have become an active research topic at the forefront of organic light-emitting diodes (OLEDs) owing to their excellent photophysical properties such as high efficiency and narrow emission characteristics. However, MR-TADF materials always exhibit slow reverse intersystem crossing rates (kRISC) due to the large energy gap and small spin-orbit coupling values between singlet and triplet excited states. In order to optimize the RISC process, strategies such as heavy-atom-integration, metal perturbation, π-conjugation extension and peripheral decoration of donor/acceptor units have been proposed to construct efficient MR-TADF materials for high-performance OLEDs. This article provides an overview of the recent progress in MR-TADF emitters with an efficient RISC process, focusing on the structure-activity relationship between the molecular structure, optoelectronic feature, and OLED performance. Finally, the potential challenges and future prospects of MR-TADF materials are discussed to gain a more comprehensive understanding of the opportunities for efficient narrowband OLEDs.

Circularly Polarized Organic Light-Emitting Diodes Based on Chiral Hole Transport Enantiomers.

The circularly polarized organic light-emitting diodes (CP-OLEDs) demonstrate promising application in 3D display due to the direct generation of circularly polarized electroluminescence (CPEL). But the chiral luminescence materials face challenges as intricated synthetic route, enantiomeric separation, etc. Herein, fresh CP-OLEDs are designed based on chiral hole transport material instead of chiral emitters. A pair of hole transport enantiomers (R/S-NPACZ) exhibit intense dissymmetry factors (|gPL|) about 5.0 × 10-3. With R/S-NPACZ as hole transport layers, CP-OLEDs are fabricated employing six achiral phosphorescence and thermally activated delayed fluorescence (TADF) materials with different wavelengths, in consistence with the generated CPEL spectra. The CP-OLEDs based on achiral red, green, and blue iridium(III) complexes exhibit external quantum efficiencies (EQEs) of 14.9%, 30.7%, and 14.1% with |gEL| factors of 8.8 × 10-4, 2.3 × 10-3, and 2.0 × 10-3, respectively. Moreover, the devices using achiral blue, blueish-green, and green TADF materials display EQEs of 24.1%, 17.9%, and 25.4% with |gEL| factors of 1.0 × 10-3, 3.6 × 10-3, and 2.2 × 10-3, respectively. As far as known, it is the first example of CP-OLEDs based on chiral hole transport materials, which act as the organic circularly polarizers and have potential to generate CPEL from achiral luminescence materials.

Design of carbazole-based platinum complexes with steric hindrance for efficient organic light-emitting diodes.

The construction of platinum complexes with high steric hindrance is expected to suppress triple-triplet annihilation and π-π stacking to achieve high-performance organic light-emitting diodes (OLEDs) with low efficiency roll-off. Herein, two large steric hindrance platinum complexes (N-CzPhPtacac and N-CzCF3PhPtacac) were prepared by taking advantage of steric hindrance between the phenyl group on carbazole and the functional group (phenyl and trifluoromethyl substituted phenyl) at the 3-position of a pyridine moiety. Due to the similar electron cloud distribution and gap difference between the HOMO and LUMO, the two complexes showed similar orange-red emission peaks at 590 and 596 nm with high PL quantum yields of 90% and 92% and short excited state lifetimes of 2.77 and 3.08 µs in doped films, respectively. Consequently, OLEDs based on N-CzPhPtacac and N-CzCF3PhPtacac showed maximum external quantum efficiency (EQEmax) values of 15.4% and 18.9%, respectively. Importantly, benefitting from the more stretched spatial configuration from the -CF3 effect, the corresponding OLED exhibited a lower efficiency roll-off, with an EQE of 18.1% at 1000 cd m-2.

Constructing Highly Efficient Circularly Polarized Multiple-Resonance Thermally Activated Delayed Fluorescence Materials with Intrinsically Helical Chirality.

Advanced circularly polarized multiple-resonance thermally activated delayed fluorescence (CP-MR-TADF) materials synergize the advantages of circularly polarized luminescence (CPL), narrowband emission, and the TADF characteristic, which can be fabricated into highly efficient circularly polarized organic light-emitting diodes (CP-OLEDs) with high color purity, directly facing the urgent market strategic demand of ultrahigh-definition and 3D displays. In this work, based on an edge-topology molecular-engineering (ETME) strategy, a pair of high-performance CP-MR-TADF enantiomers, (P and M)-BN-Py, is developed, which merges the intrinsically helical chirality into the MR framework. The optimized CP-OLEDs with (P and M)-BN-Py emitters and the newly developed ambipolar transport host PhCbBCz exhibit pure green emission with sharp peaks of 532 nm, full-width at half-maximum (FWHM) of 37 nm, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.29, 0.68). Importantly, they achieve remarkable maximum external quantum efficiencies (EQEs) of 30.6% and 29.2%, and clear circularly polarized electroluminescence (CPEL) signals with electroluminescence dissymmetry factors (gEL s) of -4.37 × 10-4 and +4.35 × 10-4 for (P)-BN-Py and (M)-BN-Py, respectively.

Tough, Reprocessable, and Recyclable Dynamic Covalent Polymers with Ultrastable Long-Lived Room-Temperature Phosphorescence.

Room-temperature phosphorescence (RTP) polymers, whose emission can persist for a long period after photoexcitation, are of great importance for practical applications. Herein, dynamic covalent boronic ester linkages with internal B-N coordination are incorporated into a commercial epoxy matrix. The reversible dissociation of B-N bonds upon loading provides an efficient energy dissipation pathway for the epoxy network, while the rigid epoxy matrix can inhibit the quenching of triplet excitons in boronic esters. The obtained polymers exhibit enhanced mechanical toughness (12.26 MJ m-3 ), ultralong RTP (τ=540.4 ms), and shape memory behavior. Notably, there is no apparent decrease in the RTP property upon prolonged immersion in various solvents because the networks are robust. Moreover, the dynamic bonds endow the polymers with superior reprocessablity and recyclability. These novel properties have led to their potential application for information encryption and anti-counterfeiting.

An indolo[3,2,1-jk]carbazole-fused multiple resonance-induced thermally activated delayed fluorescence emitter for an efficient narrowband OLED.

By inserting a tricoordinate B atom into an indolo[3,2,1-jk]carbazole precursor, an efficient fused multiple resonance-induced thermally activated delayed fluorescence emitter was prepared, which exhibits a narrowband emission and a considerable reverse intersystem crossing rate. The corresponding organic light-emitting diode displays an external quantum efficiency of 27.2% with a suppressed efficiency roll-off.

A Configurationally Confined Thermally Activated Delayed Fluorescent Two-Coordinate CuI Complex for Efficient Blue Electroluminescence.

Thermally activated delayed fluorescence (TADF) from linear two-coordinate coinage metal complexes is sensitive to the geometric arrangement of the ligands. Herein we realize the tuning of configuration from coplanar to orthogonal gradually by variation of substituents. In a complex with confined twist configuration, its blue emission peaking at 458 nm presents a high ΦPL of 0.74 and a short τTADF of 1.9 µs, which indicates a fast enough kr,TADF of 3.9×105  s-1 and a depressed knr of 1.4×105  s-1 . Such outstanding luminescent properties are attributed to the proper overlap of HOMO and LUMO on CuI d orbitals that guarantees not only small ΔEST but also sufficient transition oscillator strength for fast k r , S 1 ${{k}_{{\rm r},{{\rm S}}_{1}}}$ . Vacuum-deposited blue OLEDs with either doped or host-free emissive layer present external quantum efficiencies over 20 % and 10 %, respectively, demonstrating the practicality of the configurationally confined strategy for efficient linear CuI TADF emitters.

Planar Chiral Multiple Resonance Thermally Activated Delayed Fluorescence Materials for Efficient Circularly Polarized Electroluminescence.

Chiral boron/nitrogen doped multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters are promising for highly efficient and color-pure circularly polarized organic light-emitting diodes (CP-OLEDs). Herein, we report two pairs of MR-TADF materials (Czp-tBuCzB, Czp-POAB) based on planar chiral paracyclophane with photoluminescence quantum yields of up to 98 %. The enantiomers showed symmetric circularly polarized photoluminescence spectra with dissymmetry factors |gPL | of up to 1.6×10-3 in doped films. Meanwhile, the sky-blue CP-OLEDs with (R/S)-Czp-tBuCzB showed an external quantum efficiency of 32.1 % with the narrowest full-width at half-maximum of 24 nm among the reported CP-OLEDs, while the devices with (R/S)-Czp-POAB displayed the first nearly pure green CP electroluminescence with |gEL | factors at the 10-3 level. These results demonstrate the incorporation of planar chirality into MR-TADF emitter is a reliable strategy for constructing of efficient CP-OLEDs.

Helical ß-isoindigo-Based Chromophores with B-O-B Bridge: Facile Synthesis and Tunable Near-Infrared Circularly Polarized Luminescence.

It is essential to create organic compounds that exhibit circularly polarized luminescence (CPL) in the near-infrared (NIR) range. Helicene-type emitters possess appealing chiroptical features, however, such NIR molecules are scarce due to a paucity of synthetic strategies. Herein, we developed a series of helical ß-isoindigo-based B-O-B bridged aza-BODIPY analogs that were synthesized conveniently. The reaction of diimino-ß-isoindigo with a heteroaromatic amine produced a restricted ligand cavity, which triggered off the generation of a B-O-B bridge. The B-O-B bridge led to distorted conformations that satisfy the helical requirements, resulting in excellent spectroscopic and chiroptical properties. Tunable CPL with the highest luminescence dissymmetry factor (glum ) of 1.3×10-3 and a CPL brightness (BCPL =11.5 M-1 cm-1 ) in the NIR region was achieved. This synthetic approach is expected to offer a new opportunity to chiral chemistry and increase flexibility for chiroptical tuning.

Chiral-at-Cage Carboranes for Circularly Polarized Luminescence and Aggregation-Induced Electrochemiluminescence.

Herein, we report the structures of chiral-at-cage carborane derivatives bearing carbazole chromophores that emit circularly polarized luminescence (CPL) and aggregation-induced electrochemiluminescence (AIECL). By adjusting the substituent positions on the carborane derivatives, two chiral luminescent molecules, Cb1 and Cb2, with different properties were obtained. The photoluminescence dissymmetry factors |gPL | of both (R/S)-Cb1 and (R/S)-Cb2 enantiomers in neat films were as high as 6.24×10-3 and 7.38×10-3 , respectively. Cb1 showed a deep blue emission peak at 434 nm in n-pentane. Interestingly, distinct fluorescence and CPL spectra were observed in solvents of different polarities due to the twisted intramolecular charge transfer effect, suggesting its potential use in solvent recognition. Meanwhile, Cb2 exhibited good AIECL property, excellent ECL stability and could be used for determining dopamine concentrations, suggesting its potential applications in biology and diagnosis.

Multiple-Resonance-Induced Thermally Activated Delayed Fluorescence Materials Based on Indolo[3,2,1-jk]carbazole with an Efficient Narrowband Pure-Green Electroluminescence.

Herein, we report two multiple-resonance thermally activated delayed fluorescence emitters (VTCzBN and TCz-VTCzBN) based on indolo[3,2,1-jk]carbazole unit and boron-nitrogen skeletons, whose emissions peaking at 496 and 521 nm with full width at half maximum of 34 and 29 nm, respectively. Meanwhile, fast rate constants of reverse intersystem crossing of above 106  s-1 are obtained due to small singlet-triplet energy gaps and large spin-orbital coupling values. Notably, planar molecular structures along the transition dipole moment direction endow them with high horizontal emitting dipole ratios of up to 94 %. Consequently, the corresponding organic light-emitting diodes (OLEDs) show the maximum external quantum efficiencies of 31.7 % and 32.2 %, respectively. Particularly, OLED with TCz-VTCzBN display ultra-pure green emission with Commission Internationale de l'Eclairage coordinates of (0.22, 0.71), consistent with the green display standard of the National Television System Committee.

A Chiral Dual-Core Organoboron Structure Realizes Dual-Channel Enhanced Ultrapure Blue Emission and Highly Efficient Circularly Polarized Electroluminescence.

The realization of luminescent materials with narrowband and circularly polarized luminescence (CPL) is of great significance for the development of future optical and photonic devices. Herein, through a steric-hindrance-assisted dual-core strategy, two pairs of chiral dual-core multiple resonance thermally activated delayed fluorescence (MR-TADF) materials (R/S-DOBN and R/S-DOBNT) are directly constructed by the bonding of two organoboron MR-TADF monocores (SOBN and SOBNT) with carbazole/3,6-di-tert-butyl-9H-carbazole and phenol derivative as donors, realizing obvious CPL and narrowband emissions. Furthermore, the dual-core effect in the prepared R/S-DOBN and R/S-DOBNT increases the transition oscillator strength two times more than that of a monocore structure, while maintaining the ultrapure blue emissions peaking at 453 and 459 nm with a narrower full-width at half-maximum of 21 nm through reorganization energy reduction. The circularly polarized organic light-emitting diodes based on the enantiomers exhibit ultrapure blue emission with Commission Internationale de L'Eclairage (CIE) coordinates of (0.14, 0.10) and (0.13, 0.12), high maximum external quantum efficiencies of 23.9% and 25.6%, and obvious circularly polarized electroluminescence with dissymmetry factors (|gEL |) ≈ 10-3 .

Frontiers in chiral phosphorescent complexes for circularly polarized electroluminescence.

Materials with circularly polarized luminescence properties have attracted wide attention in recent years. One of the most important applications of these materials is for circularly polarized organic light emitting diodes (CP-OLEDs), which have potential application in 3D displays. Chiral conjugated polymers, small organic molecules and metal complexes have already been employed as emitters for CP-OLEDs. Benefiting from the ability to harvest both singlet and triplet excitons, chiral phosphorescent metal complexes always show outstanding device performance. In this article we briefly discuss the recent progress, current challenges and out look of chiral phosphorescent metal complexes.

Circularly Polarized White Organic Light-Emitting Diodes Based on Spiro-Type Thermally Activated Delayed Fluorescence Materials.

In this study, we report the first circularly polarized white organic light-emitting diodes (CP-WOLEDs) based on all thermally activated delayed fluorescence (TADF) materials. Two pairs of spiro-type TADF enantiomers, (R/S)-SPOCN (5,5'-((2,2',3,3'-tetrahydro-1,1'-spirobi[indene]-7,7'-diyl)bis(oxy))bis(4-(10H-phenoxazin-10-yl)phthalonitrile)) and (R/S)-OSFSO (2'-(trifluoromethyl)-spiro[quinolino[3,2,1-kl]phenoxazine-9,9'-thioxanthene]-10',10'-dioxide), serve as emitters with complementary emission. The CP-OLEDs exhibit warm white emission with a CIE coordinate of (0.35, 0.46). Besides, decent device performances are observed with an external quantum efficiency of up to 21.6 % at maximum and 11.8 % at 1000 cd m-2 . Obvious circularly polarized electroluminescence signals are detected with a dissymmetry factor |gEL | of around 3.0×10-3 . This is the first report of CP-WOLEDs that can harvest both singlet and triplet excitons, which provides a feasible strategy for the development of CP-WOLEDs with remarkable device performances.

Fabrication of Circularly Polarized MR-TADF Emitters with Asymmetrical Peripheral-Lock Enhancing Helical B/N-Doped Nanographenes.

Circularly polarized thermally activated delayed fluorescence (CP-TADF) and multiple-resonance thermally activated delayed fluorescence (MR-TADF), which exhibit novel circularly polarized luminescence and excellent color fidelity, respectively, have gained immense popularity. In this study, integrated CP-TADF and MR-TADF (CPMR-TADF) are prepared by strategic design and synthesis of asymmetrical peripherally locked enantiomers, which are separated and denoted as (P,P″,P″)-/(M,M″,M″)-BN4 and (P,P″,P″)-/(M,M″,M″)-BN5 and exhibit TADF and circularly polarized light (CPL) properties. As the entire molecular frame participates in the frontier molecular orbitals, the resulting helical chirality of (+)/(-)-BN4- and (+)/(-)-BN5-based solution-processed organic light-emitting diodes (OLEDs) helps in achieving a narrow full width at half maximum (FWHM) of 49/49 and 48/48 nm and a high maximum external quantum efficiency (EQE) of 20.6%/19.0% and 22.0%/26.5%, respectively. Importantly, unambiguous circularly polarized electroluminescence signals with dissymmetry factors (gEL ) of +3.7 × 10-3 /-3.1 × 10-3 (BN4) and +1.9 × 10-3 /-1.6 × 10-3 (BN5) are obtained. The results indicate successful exploitation of CPMR-TADF-emitter-based OLEDs to exhibit three characteristics: high efficiency, color purity, and circularly polarized light.

Chiral Thermally Activated Delayed Fluorescence Emitters-Based Efficient Circularly Polarized Organic Light-Emitting Diodes Featuring Low Efficiency Roll-Off.

Direct emission of circularly polarized light from organic light-emitting diodes (OLEDs) is a research hotspot as it could increase the efficiency and significantly simplify device architecture of OLED-based 3D displays. In this study, R/S-OBS-Cz and R/S-OBS-TCz with axial chirality were efficiently prepared by using a stable chiral octahydro-binaphthol unit, carbazole/3,6-ditert-butylcarbazole donors, and a 5,5,10,10-tetraoxide acceptor. The chiral unit-acceptor-donor structure provides them not only thermally activated delayed fluorescence (TADF) characteristics with minor singlet-triplet energy gaps of 0.04 and 0.05 eV but also obvious circularly polarized photoluminescence (CPPL) phenomenon with dissymmetry factors of 8.7 × 10-4 and 6.4 × 10-4 in codoped films. Meanwhile, the CP-OLEDs prepared by enantiomers exhibit good device performances with the maximum external quantum efficiency reaching 20.3% and ideal efficiency roll-off as well as obvious CPEL properties with a |gEL| factor up to 1.0 × 10-3.

Circularly Polarized Organic Room Temperature Phosphorescence from Amorphous Copolymers.

Organic optoelectronic functional materials featuring circularly polarized emission and persistent luminescence represent a novel research frontier and show promising applications in data encryption, displays, biological imaging, and so on. Herein, we present a simple and universal approach to achieve circularly polarized organic phosphorescence (CPP) from amorphous copolymers by the incorporation of axial chiral chromophores into polymer chains via radical cross-linked polymerization. Our experimental data reveal that copolymers (R/S)-PBNA exhibit a maximum CPP efficiency of 30.6% and the largest dissymmetric factor of 9.4 × 10-3 and copolymers (R/S)-PNA show the longest lifetime of 0.68 s under ambient conditions. Given the CPP property of these copolymers, their potential applications in multiple information encryption and displays are demonstrated, respectively. These findings not only lay the foundation for the development of amorphous polymers with superior CPP but also expand the outlook of room-temperature phosphorescent materials.