Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 256
Filtrar
1.
Small ; : e2404865, 2024 Jul 10.
Artículo en Inglés | MEDLINE | ID: mdl-38984733

RESUMEN

Aqueous zinc metal batteries are regarded as a promising energy storage solution for a green and sustainable society in the future. However, the practical application of metallic zinc anode is plagued by the thermodynamic instability issue of water molecules in conventional electrolytes, which leads to severe dendrite growth and side reactions. In this work, an ultra-thin and high areal capacity metallic zinc anode is achieved by utilizing crystalline water with a stable stoichiometric ratio. Unlike conventional electrolytes, the designed electrolyte can effectively suppress the reactivity of water molecules and diminish the detrimental corrosion on the metallic zinc anode, while preserving the inherent advantages of water molecules, including great kinetic performance in electrolytes and H+ capacity contribution in cathodes. Based on the comprehensive performance of the designed electrolyte, the 10 µm Zn||10 µm Zn symmetric cell stably ran for 1000 h at the current density of 1 mA cm-2, and the areal capacity of 1 mAh cm-2, whose depth-of-discharge is over 17.1%. The electrochemical performance of the 10 µm Zn||9.3 mg cm-2 polyaniline (PANI) full-cell demonstrates the feasibility of the designed electrolyte. This work provides a crucial understanding of balancing activity of water molecules in aqueous zinc metal batteries.

2.
BME Front ; 5: 0044, 2024.
Artículo en Inglés | MEDLINE | ID: mdl-38946867

RESUMEN

Objective: We have developed a baroreceptor-inspired microneedle skin patch for pressure-controlled drug release. Impact Statement: This design is inspired by the skin baroreceptors, which are mechanosensitive elements of the peripheral nervous system. We adopt the finger touching to trigger the electric stimulation, ensuring a fast-response and user-friendly administration with potentially minimal off-target effects. Introduction: Chronic skin diseases bring about large, recurrent skin damage and often require convenient and timely transdermal treatment. Traditional methods lack spatiotemporal controllable dosage, leaving a risk of skin irritation or drug resistance issues. Methods: The patch consists of drug-containing microneedles and stretchable electrode array. The electrode array, integrated with the piezoconductive switch and flexible battery, provides a mild electric current only at the spot that is pressed. Drugs in microneedles will then flow along the current into the skin tissues. The stretchable feature also provides the mechanical robustness and electric stability of the device on large skin area. Results: This device delivers Cy3 dye in pig skin with spatiotemporally controlled dosage, showing ~8 times higher fluorescence intensity than the passive delivery. We also deliver insulin and observe the reduction of the blood glucose level in the mouse model upon pressing. Compared with passive delivery without pressing, the dosage of drugs released by the simulation is 2.83 times higher. Conclusion: This baroreceptor-inspired microneedle skin patch acts as a good example of the biomimicking microneedle device in the precise control of the drug release profile at the spatiotemporal resolution.

3.
J Am Chem Soc ; 2024 Jul 03.
Artículo en Inglés | MEDLINE | ID: mdl-38959288

RESUMEN

The exploitation of new anion battery systems based on high-abundance oceanic elements (e.g., F-, Cl-, and Br-) is a strong supplement to the current metal cation (e.g., Li+, Na+) battery technologies. Bismuth (Bi), the rare anion-specific anode species nearest to practical application for chloride ion storage, is plagued by volume expansion and structure collapse due to limited control of its conversion behavior. Here, we reveal that a unique epitaxy-like conversion mechanism in the monocrystalline Bi nanospheres (R3m group) can drastically inhibit grain pulverization and capacity fading, which is enabled by Cl- intercalation in their interlayer space. The Bi nanosphere anode can self-evolve and transform into a rigid BiOCl nanosheet-interlaced structure after the initial conversion reaction. With this epitaxy-like conversion mechanism, the Bi anode exhibits a record-high capacity of 249 mAh g-1 (∼1.2 mAh cm-2) at 0.25 C and sustains more than 1400 h with 20% capacity loss. Pairing this anode with a Prussian blue cathode, the full battery can deliver an ultrahigh desalination capacity of 127.1 m gCl gBi-1. Our study milestones the understanding of conversion-type anode structures, which is an essential step toward the commercialization of aqueous batteries.

4.
Adv Mater ; : e2402898, 2024 Jun 11.
Artículo en Inglés | MEDLINE | ID: mdl-38862392

RESUMEN

Sulfur is a promising conversion-type cathode for zinc batteries (ZBs) due to its high discharge capacity and cost-effectiveness. However, the redox conversion of multivalent S in ZBs is still limited, only having achieved S0/S2- redox conversion with low discharge voltage and poor reversibility. This study presents significant progress by demonstrating, for the first time, the reversible S2-/S4+ redox behavior in ZBs with up to six-electron transfer (with an achieved discharge capacity of ≈1284 mAh g-1) using a highly concentrated ClO4 --containing electrolyte. The developed succinonitrile-Zn(ClO4)2 eutectic electrolyte stabilizes the positive-valence S compound and contributes to an ultra-low polarization voltage. Notably, the achieved flat discharge plateaus demonstrate the highest operation voltage (1.54 V) achieved to date in Zn‖S batteries. Furthermore, the high-voltage Zn‖S battery exhibits remarkable conversion dynamics, excellent cycling performance (85.7% capacity retention after 500 cycles), high efficiency (98.4%), and energy density (527 Wh kg S -1). This strategy of positive-valence conversion of sulfur represents a significant advancement in understanding sulfur chemistry in batteries and holds promise for future high-voltage sulfur-based batteries.

5.
Sci Adv ; 10(24): eadl0587, 2024 Jun 14.
Artículo en Inglés | MEDLINE | ID: mdl-38875345

RESUMEN

Despite their potential as conversion-type energy storage technologies, the performance of static lithium-bromide (SLB) batteries has remained stagnant for decades. Progress has been hindered by the intrinsic liquid-liquid redox mode and single-electron transfer of these batteries. Here, we developed a high-performance SLB battery based on the active bromine salt cathode and the two-electron transfer chemistry with a Br-/Br+ redox couple by electrolyte tailoring. The introduction of NO3- improved the reversible single-electron transition of Br-, and more impressively, the coordinated Cl- anions activated the Br+ conversion to provide an additional electron transfer. A voltage plateau was observed at 3.8 V, and the discharge capacity and energy density were increased by 142 and 159% compared to the one-electron reaction benchmark. This two-step conversion mechanism exhibited excellent stability, with the battery functioning for 1000 cycles. These performances already approach the state of the art of currently established Li-halogen batteries. We consider the established two-electron redox mechanism highly exemplary for diversified halogen batteries.

6.
Adv Mater ; : e2406451, 2024 Jun 18.
Artículo en Inglés | MEDLINE | ID: mdl-38888505

RESUMEN

Zinc metal is recognized as the most promising anode for aqueous energy storage but suffers from severe dendrite growth and poor reversibility. However, the coulombic efficiency lacks specificity for zinc dendrite growth, particularly in Zn||Zn symmetric cells. Herein, a novel indicator (fD) based on the characteristic crystallization peaks is proposed to evaluate the growth and distribution of zinc dendrites. As a proof of concept, triethylenetetramine (TETA) is adopted as an electrolyte additive to manipulate the zinc flux for uniform deposition, with a corroborating low fD value. A highly durable zinc symmetric cell is achieved, lasting over 2500 h at 10 mA cm-2 and 400 h at a large discharge of depth (10 mA cm-2, 10 mAh cm-2). Supported by the low fD value, the Zn||TETA-ZnSO4||MnO2 batteries overcome the sudden short circuit and fast capacity fading. The study provides a feasible method to evaluate zinc dendrites and sheds light on the design of highly reversible zinc anodes.

7.
Nanoscale ; 2024 Jun 24.
Artículo en Inglés | MEDLINE | ID: mdl-38912906

RESUMEN

In this comprehensive investigation, we explore the effectiveness of 55 dual-atom catalysts (DACs) supported on graphitic carbon nitride (gCN) for both alkaline and acidic hydrogen evolution reactions (HER). Employing density functional theory (DFT), we scrutinize the thermodynamic and kinetic profiles of these DACs, revealing their considerable potential across a diverse pH spectrum. For acidic HER, our results identify catalysts such as FePd-gCN, CrCr-gCN, and NiPd-gCN, displaying promising ΔGH* values of 0.0, 0.0, and -0.15 eV, respectively. This highlights their potential effectiveness in acidic environments, thereby expanding the scope of their applicability. Within the domain of alkaline HER, this study delves into the thermodynamic and kinetic profiles of DACs supported on gCN, utilizing DFT to illuminate their efficacy in alkaline HER. Through systematic evaluation, we identify that DACs such as CrCo-gCN, FeRu-gCN, and FeIr-gCN not only demonstrate favorable Gibbs free energy change (ΔGmax) for the overall water splitting reaction of 0.02, 0.27, and 0.38 eV, respectively, but also feature low activation energies (Ea) for water dissociation, with CrCo-gCN, FeRu-gCN, and FeIr-gCN notably exhibiting the Ea of just 0.42, 0.33, and 0.42 eV, respectively. The introduction of an electronic descriptor (φ), derived from d electron count (Nd) and electronegativity (ETM), provides a quantifiable relationship with catalytic activity, where a lower φ corresponds to enhanced reaction kinetics. Specifically, φ values between 4.0-4.6 correlate with the lowest kinetic barriers, signifying a streamlined HER process. Our findings suggest that DACs with optimized φ values present a robust approach for the development of high-performance alkaline HER electrocatalysts, offering a pathway towards the rational design of energy-efficient catalytic systems.

8.
Nat Commun ; 15(1): 3748, 2024 May 03.
Artículo en Inglés | MEDLINE | ID: mdl-38702298

RESUMEN

The high redox potential of Zn0/2+ leads to low voltage of Zn batteries and therefore low energy density, plaguing deployment of Zn batteries in many energy-demanding applications. Though employing high-voltage cathode like spinel LiNi0.5Mn1.5O4 can increase the voltages of Zn batteries, Zn2+ ions will be immobilized in LiNi0.5Mn1.5O4 once intercalated, resulting in irreversibility. Here, we design a polymer hetero-electrolyte consisting of an anode layer with Zn2+ ions as charge carriers and a cathode layer that blocks the Zn2+ ion shuttle, which allows separated Zn and Li reversibility. As such, the Zn‖LNMO cell exhibits up to 2.4 V discharge voltage and 450 stable cycles with high reversible capacity, which are also attained in a scale-up pouch cell. The pouch cell shows a low self-discharge after resting for 28 days. The designed electrolyte paves the way to develop high-voltage Zn batteries based on reversible lithiated cathodes.

9.
Nat Commun ; 15(1): 3841, 2024 May 07.
Artículo en Inglés | MEDLINE | ID: mdl-38714710

RESUMEN

Aqueous Zn-I flow batteries utilizing low-cost porous membranes are promising candidates for high-power-density large-scale energy storage. However, capacity loss and low Coulombic efficiency resulting from polyiodide cross-over hinder the grid-level battery performance. Here, we develop colloidal chemistry for iodine-starch catholytes, endowing enlarged-sized active materials by strong chemisorption-induced colloidal aggregation. The size-sieving effect effectively suppresses polyiodide cross-over, enabling the utilization of porous membranes with high ionic conductivity. The developed flow battery achieves a high-power density of 42 mW cm-2 at 37.5 mA cm-2 with a Coulombic efficiency of over 98% and prolonged cycling for 200 cycles at 32.4 Ah L-1posolyte (50% state of charge), even at 50 °C. Furthermore, the scaled-up flow battery module integrating with photovoltaic packs demonstrates practical renewable energy storage capabilities. Cost analysis reveals a 14.3 times reduction in the installed cost due to the applicability of cheap porous membranes, indicating its potential competitiveness for grid energy storage.

10.
Angew Chem Int Ed Engl ; : e202407589, 2024 May 04.
Artículo en Inglés | MEDLINE | ID: mdl-38703065

RESUMEN

Directly electrochemical conversion of nitrate (NO3 -) is an efficient and environmentally friendly technology for ammonia (NH3) production but is challenged by highly selective electrocatalysts. High-entropy alloys (HEAs) with unique properties are attractive materials in catalysis, particularly for multi-step reactions. Herein, we first reported the application of HEA (FeCoNiAlTi) for electrocatalytic NO3 - reduction to NH3 (NRA). The bulk HEA is active for NRA but limited by the unsatisfied NH3 yield of 0.36 mg h-1 cm-2 and Faradaic efficiency (FE) of 82.66 %. Through an effective phase engineering strategy, uniform intermetallic nanoparticles are introduced on the bulk HEA to increase electrochemical active surface area and charge transfer efficiency. The resulting nanostructured HEA (n-HEA) delivers enhanced electrochemical NRA performance in terms of NH3 yield (0.52 mg h-1 cm-2) and FE (95.23 %). Further experimental and theoretical investigations reveal that the multi-active sites (Fe, Co, and Ni) dominated electrocatalysis for NRA over the n-HEA. Notably, the typical Co sites exhibit the lowest energy barrier for NRA with *NH2 to *NH3as the rate-determining step.

11.
Adv Mater ; : e2401549, 2024 May 13.
Artículo en Inglés | MEDLINE | ID: mdl-38739735

RESUMEN

Residual solvents in vinylidene fluoride (VDF)-based solid polymer electrolytes (SPEs) have been recognized as responsible for their high ionic conductivity. However, side reactions by the residual solvents with the lithium (Li) metal induce poor stability, which has been long neglected. This study proposes a strategy to achieve a delicate equilibrium between ion conduction and electrode stability for VDF-based SPEs. Specifically, 2,2,2-trifluoro-N,N-dimethylacetamide (FDMA) is developed as the nonside reaction solvent for poly(vinylidene fluoride-co-hexafluoropropylene) (PVHF)-based SPEs, achieving both high ionic conductivity and significantly improved electrochemical stability. The developed FDMA solvent fosters the formation of a stable solid electrolyte interphase (SEI) through interface reactions with Li metal, effectively mitigating side reactions and dendrite growth on the Li metal electrode. Consequently, the Li||Li symmetric cells and Li||LiFePO4 cells demonstrate excellent cycling performance, even under limited Li (20 µm thick) supply and high-loading cathodes (>10 mg cm-2, capacity >1 mAh cm-2) conditions. The stable Li||LiCoO2 cells operation with a cutoff voltage of 4.48 V indicates the high-voltage stability of the developed SPE. This study offers valuable insights into the development of advanced VDF-based SPEs for enhanced lithium metal battery performance and longevity.

12.
Nat Rev Chem ; 8(7): 493-494, 2024 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-38760572
13.
J Am Chem Soc ; 146(22): 15393-15402, 2024 Jun 05.
Artículo en Inglés | MEDLINE | ID: mdl-38767283

RESUMEN

Quinone-based electrodes using carbonyl redox reactions are promising candidates for aqueous energy storage due to their high theoretical specific capacity and high-rate performance. However, the proton storage manners and their influences on the electrochemical performance of quinone are still not clear. Herein, we reveal that proton storage could determine the products of the enol conversion and the electrochemical stability of the organic electrode. Specifically, the protons preferentially coordinated with the prototypical pyrene-4,5,9,10-tetraone (PTO) cathode, and increasing the proton concentration in the electrolyte can improve its working potentials and cycling stability by tailoring the enol conversion reaction. We also found that exploiting Al2(SO4)3 as a pH buffer can increase the energy density of the Zn||PTO batteries from 242.8 to 284.6 Wh kg-1. Our research has a guiding significance for emphasizing proton storage of organic electrodes based on enol conversion reactions and improving their electrochemical performance.

14.
Proc Natl Acad Sci U S A ; 121(15): e2319525121, 2024 Apr 09.
Artículo en Inglés | MEDLINE | ID: mdl-38564637

RESUMEN

The fine regulation of catalysts by the atomic-level removal of inactive atoms can promote the active site exposure for performance enhancement, whereas suffering from the difficulty in controllably removing atoms using current micro/nano-scale material fabrication technologies. Here, we developed a surface atom knockout method to promote the active site exposure in an alloy catalyst. Taking Cu3Pd alloy as an example, it refers to assemble a battery using Cu3Pd and Zn as cathode and anode, the charge process of which proceeds at about 1.1 V, equal to the theoretical potential difference between Cu2+/Cu and Zn2+/Zn, suggesting the electricity-driven dissolution of Cu atoms. The precise knockout of Cu atoms is confirmed by the linear relationship between the amount of the removed Cu atoms and the battery cumulative specific capacity, which is attributed to the inherent atom-electron-capacity correspondence. We observed the surface atom knockout process at different stages and studied the evolution of the chemical environment. The alloy catalyst achieves a higher current density for oxygen reduction reaction compared to the original alloy and Pt/C. This work provides an atomic fabrication method for material synthesis and regulation toward the wide applications in catalysis, energy, and others.

15.
Nat Rev Chem ; 8(5): 359-375, 2024 May.
Artículo en Inglés | MEDLINE | ID: mdl-38671189

RESUMEN

Halogen-powered static conversion batteries (HSCBs) thrive in energy storage applications. They fall into the category of secondary non-flow batteries and operate by reversibly changing the chemical valence of halogens in the electrodes or/and electrolytes to transfer electrons, distinguishing them from the classic rocking-chair batteries. The active halide chemicals developed for these purposes include organic halides, halide salts, halogenated inorganics, organic-inorganic halides and the most widely studied elemental halogens. Aside from this, various redox mechanisms have been discovered based on multi-electron transfer and effective reaction pathways, contributing to improved electrochemical performances and stabilities of HSCBs. In this Review, we discuss the status of HSCBs and their electrochemical mechanism-performance correlations. We first provide a detailed exposition of the fundamental redox mechanisms, thermodynamics, conversion and catalysis chemistry, and mass or electron transfer modes involved in HSCBs. We conclude with a perspective on the challenges faced by the community and opportunities towards practical applications of high-energy halogen cathodes in energy-storage devices.

16.
Adv Mater ; 36(26): e2401924, 2024 Jun.
Artículo en Inglés | MEDLINE | ID: mdl-38593988

RESUMEN

With the increasing need for reliable storage systems, the conversion-type chemistry typified by bromine cathodes attracts considerable attention due to sizeable theoretical capacity, cost efficiency, and high redox potential. However, the severe loss of active species during operation remains a problem, leading researchers to resort to concentrated halide-containing electrolytes. Here, profiting from the intrinsic halide exchange in perovskite lattices, a novel low-dimensional halide hybrid perovskite cathode, TmdpPb2[IBr]6, which serves not only as a halogen reservoir for reversible three-electron conversions but also as an effective halogen absorbent by surface Pb dangling bonds, C─H…Br hydrogen bonds, and Pb─I…Br halogen bonds, is proposed. As such, the Zn||TmdpPb2[IBr]6 battery delivers three remarkable discharge voltage plateaus at 1.21 V (I0/I-), 1.47 V (I+/I0), and 1.74 V (Br0/Br-) in a typical halide-free electrolyte; meanwhile, realizing a high capacity of over 336 mAh g-1 at 0.4 A g-1 and high capacity retentions of 88% and 92% after 1000 cycles at 1.2 A g-1 and 4000 cycles at 3.2 A g-1, respectively, accompanied by a high coulombic efficiency of ≈99%. The work highlights the promising conversion-type cathodes based on metal-halide perovskite materials.

17.
Small Methods ; 8(6): e2400427, 2024 Jun.
Artículo en Inglés | MEDLINE | ID: mdl-38630013
18.
Angew Chem Int Ed Engl ; 63(22): e202403504, 2024 May 27.
Artículo en Inglés | MEDLINE | ID: mdl-38563637

RESUMEN

The rechargeable aqueous Zn||MnO2 chemistry has been extensively explored, but its electrochemical reaction mechanisms, especially in the context of MnO2/Mn2+ conversion and Zn2+/H+ intercalation chemistry, remain not fully understood. Here, we designed an amphiphilic hydrogel electrolyte, which distinguished the MnO2/Mn2+ conversion, Zn2+ intercalation, and H+ intercalation and conversion processes at three distinct discharge plateaus of an aqueous Zn||MnO2 battery. The amphiphilic hydrogel electrolyte is featured with an extended electrochemical stability window up to 3.0 V, high ionic conductivity, Zn2+-selective ion tunnels, and hydrophobic associations with cathode materials. This specifically designed electrolyte allows the MnO2/Mn2+ conversion reaction at a discharge plateau of 1.75 V. More interesting, the discharge plateaus of ~1.33 V, previously assigned as the co-intercalation of Zn2+ and H+ ions in the MnO2 cathode, are specified as the exclusive intercalation of Zn2+ ions, leading to an ultra-flat voltage plateau. Furthermore, with a distinct three-step electrochemical energy storage process, a high areal capacity of 1.8 mAh cm-2 and high specific energy of 0.858 Wh cm-2, even at a low MnO2 loading mass of 0.5 mg cm-2 are achieved. To our knowledge, this is the first report to fully distinguish different mechanisms at different potentials in aqueous Zn||MnO2 batteries.

19.
Angew Chem Int Ed Engl ; 63(23): e202405428, 2024 Jun 03.
Artículo en Inglés | MEDLINE | ID: mdl-38563631

RESUMEN

The extensively studied Prussian blue analogs (PBAs) in various batteries are limited by their low discharge capacity, or subpar rate etc., which are solely reliant on the cation (de)intercalation mechanism. In contrast to the currently predominant focus on cations, we report the overlooked anion-cation competition chemistry (Cl-, K+, Zn2+) stimulated by high-voltage scanning. With our designed anion-cation combinations, the KFeMnHCF cathode battery delivers comprehensively superior discharge performance, including voltage plateau >2.0 V (vs. Zn/Zn2+), capacity >150 mAh g-1, rate capability with capacity maintenance above 96 % from 0.6 to 5 A g-1, and cyclic stability exceeding 3000 cycles. We further verify that such comprehensive improvement of electrochemical performance utilizing anion-cation competition chemistry is universal for different types of PBAs. Our work would pave a new and efficient road towards the next-generation high-performance PBAs cathode batteries.

20.
Angew Chem Int Ed Engl ; 63(23): e202401501, 2024 Jun 03.
Artículo en Inglés | MEDLINE | ID: mdl-38589296

RESUMEN

Compared to sp2-hybridized graphene, graphdiynes (GDYs) composed of sp and sp2 carbon are highly promising as efficient catalysts for electrocatalytic oxygen reduction into oxygen peroxide because of the high catalytic reactivity of the electron-rich sp-carbon atoms. The desired catalytic capacity of GDY, such as catalytic selectivity and efficiency, can theoretically be achieved by strategically steering the sp-carbon contents or the topological arrangement of the acetylenic linkages and aromatic bonds. Herein, we successfully tuned the electrocatalytic activity of GDYs by regulating the sp-to-sp2 carbon ratios with different organic monomer precursors. As the active sp-carbon atoms possess electron-sufficient π orbitals, they can donate electrons to the lowest unoccupied molecular orbital (LUMO) orbitals of O2 molecules and initiate subsequent O2 reduction, GDY with the high sp-carbon content of 50 at % exhibits excellent capability of catalyzing O2 reduction into H2O2. It demonstrates exceptional H2O2 selectivity of over 95.0 % and impressive performance in practical H2O2 production, Faraday efficiency (FE) exceeding 99.0 %, and a yield of 83.3 nmol s-1 cm-2. Our work holds significant importance in effectively steering the inherent properties of GDYs by purposefully adjusting the sp-to-sp2 carbon ratio and highlights their immense potential for research and applications in catalysis and other fields.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA