Rational design and synthesis of magnetic covalent organic frameworks for controlling the selectivity and enhancing the extraction efficiency of polycyclic aromatic hydrocarbons.

A series of three-dimensional magnetic covalent organic frameworks were designed and synthesized via monomer selection, coating thickness optimization, and composite strategy transformation. Their structure properties including morphology, functional group, surface area, and pore size were characterized. The relationship between the structural properties and analytical performance was systematically investigated by density functional theory calculation and batch extraction experiments for polycyclic aromatic hydrocarbons. It is proven that the extractant modified by monomer 1,4-phthalaldehyde provides a hizgh affinity for high molecule weight polycyclic aromatic hydrocarbons and the right balance between extraction and elution efficiency. The relationship between coating thickness and mass transfer rate of polycyclic aromatic hydrocarbons was studied by accurate tuning of coating layers via layer-by-layer method. A mathematical model was derived and employed to determine that two coating layers were sufficient to provide the highest extraction efficiency with the shortest equilibrium time. The extractants synthesized by two different composite strategies (layer-by-layer and one-step) show opposite selectivity for polycyclic aromatic hydrocarbons. After optimization of the extraction conditions, dispersed solid-phase extraction coupled with gas chromatography-mass spectroscopy method was developed providing a wide linear range (5-500 ng L-1), good linearity (R2 > 0.9923), high precision in intra-day (RSD% < 8.2%) and inter-day (RSD% < 12.3%) detection, and low detection limits (1.5-15.1 ng L-1). The method was applied to the simultaneous determination of 16 polycyclic aromatic hydrocarbons with acceptable recoveries, which were 87-109% for groundwater, 83-116% for East Lake water, and 82-116% for Yangtze River water samples.

Eco-friendly and facile one-step synthesis of a three dimensional net-like magnetic mesoporous carbon derived from wastepaper as a renewable adsorbent.

Millions of tons of paper and its derivatives are annually wasted without being recycled and reused. To promote the comprehensive utilization of resources and eco-friendly preparation, waste filter paper, printer paper, and napkins were chosen as carbon sources to one-step synthesize three types of three dimensional (3D) net-like magnetic mesoporous carbon (MMC) by an eco-friendly and low-cost method. These mesoporous (3.90-7.68 nm) composites have a high specific surface area (287-423 m2 g-1), well-developed porosity (0.24-0.74 cm3 g-1) and abundant oxygen-containing functional groups. Compared to the other two composites, the adsorbent derived from filter paper showed the highest adsorption capacity towards methylene blue (MB) (q max = 332.03 mg g-1) and rhodamine B (RhB) (q max = 389.59 mg g-1) with a high adsorption rate (<5 min). According to the effect of pH value on adsorption capacity, and combining the analysis of Fourier transform infrared spectrometry and X-ray photoelectron spectroscopy, the main adsorption mechanisms can be summarized as hydrogen bonds, electrostatic interactions, and π-π interaction. Besides, the occurrence of redox reactions between Fe2+/Fe0 and dye cannot be ignored. Finally, experiments on reusability were performed. They showed that the 3D net-like MMC could be easily regenerated and still maintained a removal efficiency of above 80% for RhB and 90% for MB after five cycles.

Hydrothermally tailor-made chitosan fiber for micro-solid phase extraction of petroleum acids in crude oils.

Tailor-made chitosan fiber was prepared via hydrothermal treatment to serve as a micro-solid phase extraction (micro-SPE) sorbent for the analysis of petroleum acids (PAs) in crude oils. Chitosan fiber, which is commercial and cheap, has a diameter of about 10 µm and a length of a few centimeters. The fibrous property of the sorbent enables the micro-SPE to deal with viscous crude oil samples because of the low back-pressure during extraction, while the abundant hydroxyl groups and amino groups on the surface of chitosan fiber can provide high density of specific sites for adsorption of PAs. Moreover, it was found that hydrothermal treatment at certain conditions could tune the surface properties of chitosan fiber, leading to significant improvement of the capacity of the fiber in adsorption of PAs. Using hydrothermally treated chitosan fiber as sorbent, the micro-SPE was applied to the determination of PAs in crude oils, with the advantages of easy-operation, rapidness and high sensitivity (the limits of detection range from 0.7 ng/g to 5.4 ng/g). Furthermore, coupled with comprehensive two dimensional gas chromatography-mass spectrometry (GC × GCMS), the treated chitosan fiber packed micro-SPE method showed a great potential for comprehensive profiling of PAs in crude oils.

Porphyrin-based magnetic nanocomposites for efficient extraction of polycyclic aromatic hydrocarbons from water samples.

Stable and reusable porphyrin-based magnetic nanocomposites were successfully synthesized for efficient extraction of polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. Meso-Tetra (4-carboxyphenyl) porphyrin (TCPP), a kind of porphyrin, can connect the copolymer after amidation and was linked to Fe3O4@SiO2 magnetic nanospheres via cross-coupling. Several characteristic techniques such as field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectrometry, vibrating sample magnetometry and a tensiometer were used to characterize the as-synthesized materials. The structure of the copolymer was similar to that of graphene, possessing sp2-conjugated carbon rings, but with an appropriate amount of delocalized π-electrons giving rise to the higher extraction efficiency for heavy PAHs without sacrificing the performance in the extraction of light PAHs. Six extraction parameters, including the TCPP:Fe3O4@SiO2 (m:m) ratio, the amount of adsorbents, the type of desorption solvent, the desorption solvent volume, the adsorption time and the desorption time, were investigated. After the optimization of extraction conditions, a comparison of the extraction efficiency of Fe3O4@SiO2-TCPP and Fe3O4@SiO2@GO was carried out. The adsorption mechanism of TCPP to PAHs was studied by first-principles density functional theory (DFT) calculations. Combining experimental and calculated results, it was shown that the π-π stacking interaction was the main adsorption mechanism of TCPP for PAHs and that the amount of delocalized π-electrons plays an important role in the elution process. Under the optimal conditions, Fe3O4@SiO2-porphyrin showed good precision in intra-day (<8.9%) and inter-day (<13.0%) detection, low method detection limits (2-10 ng L-1), and wide linearity (10-10000 ng L-1). The method was applied to simultaneous analysis of 15 PAHs with acceptable recoveries, which were 71.1%-106.0% for ground water samples and 73.7%-107.1% for Yangtze River water samples, respectively.

Magnetic extractant with an Fe3O4@SiO2 core and aqueous ammonia coating for microextraction of petroleum acids.

Magnetic aqueous ammonia (MAA) was prepared as a magnetic extractant for dispersive microextraction of petroleum acids (PAs). The amount of extractant in MAA was custom-made by a simple approach. In the MAA composed of an aqueous ammonia coating and Fe3O4@SiO2 core, the coating is a base extractant that can selectively extract acids, while the magnetic core serves as a support to achieve dispersion as well as rapid magnetic retrieval of the extractant during the extraction processes. This is the first use of reusable, stable and modifiable Fe3O4@SiO2 as a support instead of bare Fe3O4 in a magnetic particle assisted dispersive liquid-liquid microextraction technique. The parameters that affect extraction efficiency were investigated. The sampling step as well as the desorption step can be completed in 2 min. The linear ranges are 5-5000 ng g-1, while the limits of quantification range from 2.5 to 6.2 ng g-1. The recoveries in spiked crude oil samples are in the range of 79.1% to 112.1% with relative standard deviations less than 11.3% (intra-day) and 13.4% (inter-day). Finally, the proposed method was applied to the analysis of PAs in diluted crude oils with different maturities. In comparison to the existing methods for extraction of PAs, the proposed method provides superior performances including high throughput (12-well plate), high degree of sample clean-up, and low consumption of separation material, solvent and time.

Polyoxometalate incorporated polymer monolith microextraction for highly selective extraction of antidepressants in undiluted urine.

In this work, a polyoxometalate (POM) incorporated polymer monolith microextraction (PMME) was successfully proposed and employed in the selective extraction of basic antidepressants in undiluted urine sample. This hybrid monolith exhibited strong cation-exchange interaction (SCX) with positively charged antidepressants when pH was 3.0, because of the multiple ionizable moieties on polyanionic POM. As such, antidepressants in complex sample matrices were efficiently extracted by the monolith, and the matrix effect was significantly reduced. In addition, due to the high amount of anionic POM, the monolith exhibited remarkable extraction capacities for target antidepressants ranging from 4.7 to 5.8mg/g. Further, the POM incorporated PMME was coupled with high-performance liquid chromatography-ultraviolet (HPLC-UV). Thus, antidepressants in undiluted urine sample was efficiently extracted under optimized extraction conditions online. The limits of detection (LODs) for the target antidepressants ranged from 0.7 to 1.4ng/mL, and the linear range was 5-1000ng/mL with determination coefficients (R2) higher than 0.9960. The recoveries ranged from 86.8% to 104.0% with relative standard deviations (RSDs) of 0.4-10.1%. The proposed procedure was successfully applied to determine antidepressant in human urine. Taken together, the developed method presented a new strategy for the analysis of basic drugs in undiluted urine sample, which could be used for monitoring medicines in pharmacokinetic analysis.

Pyridoxal 5'-phosphate mediated preparation of immobilized metal affinity material for highly selective and sensitive enrichment of phosphopeptides.

Phosphorylation is a crucial post-translational modification, which plays pivotal roles in various biological processes. Analysis of phosphopeptides by mass spectrometry (MS) is intractable on account of their low stoichiometry and the ion suppression from non-phosphopeptides. Thus, enrichment of phosphopeptides before MS analysis is indispensable. In this work, we employed pyridoxal 5'-phosphate (PLP), as an immobilized metal affinity chromatography (IMAC) ligand for the enrichment of phosphopeptides. PLP was grafted onto several substrates such as silica (SiO2), oxidized carbon nanotube (OCNT) and silica coated magnetic nanoparticles (Fe3O4@SiO2). Then the metal ions Fe3+, Ga3+ and Ti4+ were incorporated for the selective enrichment of phosphopeptides. It is indicated that Fe3O4@SiO2-PLP-Ti4+ has a superior selectivity towards phosphopeptides under as much as 1000-fold interferences of non-phosphopeptides. Further, Fe3O4@SiO2-PLP-Ti4+ exhibited high efficiency in selective enrichments of phosphopeptides from complex biological samples, including human serum and tryptic digested non-fat milk. Finally, Fe3O4@SiO2-PLP-Ti4+ was successfully employed in the sample pretreatment for profiling phosphopeptides in a tryptic digest of rat brain proteins. Our experimental results evidenced a great potential of this new chelator-based material in phosphoproteomics study.

Synthesis of Polyethylenimine Functionalized Mesoporous Silica for In-Pipet-Tip Phosphopeptide Enrichment.

Synthesis of functionalized mesoporous silica material with large particle size remains a chanllenge. In this work, polyethylenimine (PEI) functionalized mesoporous silica (PFMS) with particle size as large as 100 µm was successfully synthesized by a facile method. In the synthesis process, PEI served as four roles simultaneously, including functionalized reagent, alkaline catalyst, template for particle formation, and pore-structure-directing agent. The surface areas of the products were higher than 260 m2/g. Benefiting from the large particle size and high surface area, PFMS was packed in a pipet tip to fabricate a convenient and miniaturized solid phase extraction apparatus for sample preparation. Additionally, based on the extremely abundant basic sites in the organic units of PFMS, the in-pipet-tip system was used as an anion-exchanger for phosphopeptide enrichment. The specificity of the developed method was investigated by capture of phosphopeptides from tryptic digests of standard protein mixtures, tryptic digests of nonfat milk, and human serum. Furthermore, the method was utilized to analyze phosphopeptides in tryptic digests of rat brain lysate, and 2251 unique phosphopeptides were successfully detected.

Determination of diamondoids in crude oils using gas purge microsyringe extraction with comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry.

Based on a homemade device, gas purge microsyringe extraction (GP-MSE) of crude oil samples was developed for the first time. As a simple, fast, low-cost, sensitive and solvent-saving technique, GP-MSE provides some outstanding advantages over the widely used sample preparation methods for crude oils such as column chromatography (ASTM D2549). Several parameters affecting extraction efficiency were optimized, including extraction temperature, extraction time, extraction solvent, condensing temperature and purge gas flow rate. With the optimized GP-MSE conditions, several real crude oil samples were extracted, and trace diamondoids were determined using comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry (GC×GC-TOFMS). In total, more than 100 diamondoids were detected and 27 marker compounds were identified and quantified accurately. The limits of detection (LODs, S/N=3) were less than 0.08µg/L for all diamondoids. The relative standard deviation (RSD) was below 8%, ranging from 1.1 to 7.6%. The linearity of the developed method was in the range of 0.5-100.0µg/L with correlation coefficients (R2) more than 0.996. The recoveries obtained at spiking 50µg/L were between 81 and 108% for diamondoids in crude oil samples. The developed method can also be extended to the analysis of other components in crude oils and other complex matrices.

Electrospun fibrous thin film microextraction coupled with desorption corona beam ionization-mass spectrometry for rapid analysis of antidepressants in human plasma.

Appropriate sample preparations prior to analysis can significantly enhance the sensitivity of ambient ionization techniques, especially during the enrichment or purification of analytes in the presence of complex biological matrix. Here in, we developed a rapid analysis method by the combination of thin film microextraction (TFME) and desorption corona beam ionization (DCBI) for the determination of antidepressants in human plasma. Thin films used for extraction consisted of sub-micron sized highly ordered mesoporous silica-carbon composite fibers (OMSCFs), simply prepared by electrospinning and subsequent carbonization. Typically, OMSCFs thin film was immersed into the diluted plasma for extraction of target analytes and then directly subjected to the DCBI-MS for detection. Size-exclusion effect of mesopores contributed to avoid of the protein precipitation step prior to extraction. Mass transfer was benefited from high surface-to-volume ratio which is attributed to macroporous network and ordered mesostructures. Moreover, the OMSCFs provided mixed-mode hydrophobic/ion-exchange interactions towards target analytes. Thus, the detection sensitivity was greatly improved due to effective enrichment of the target analytes and elimination of matrix interferences. After optimization of several parameters related to extraction performance, the proposed method was eventually applied for the determination of three antidepressants in human plasma. The calibration curves were plotted in the range of 5-1000 ng/mL with acceptable linearity (R(2) >0.983). The limits of detection (S/N=3) of three antidepressants were in ranges of 0.3-1 ng/mL. Reproducibility was achieved with RSD less than 17.6% and the relative recoveries were in ranges of 83.6-116.9%. Taken together, TFME-DCBI-MS method offers a powerful capacity for rapid analysis to achieve much-improved sensitivity.

Magnetic graphitic carbon nitride anion exchanger for specific enrichment of phosphopeptides.

Anion-exchange chromatography (AEX) is one of the chromatography-based methods effectively being used for phosphopeptide enrichment. However, the development of AEX materials with high specificity toward phosphopeptides is still less explored as compared to immobilized metal affinity chromatography (IMAC) or metal oxide affinity chromatography (MOAC). In this work, magnetic graphitic carbon nitride (MCN) was successfully prepared and introduced as a promising AEX candidate for phosphopeptide enrichment. Due to the extremely abundant content of nitrogen with basic functionality on the surface, this material kept excellent retention for phosphopeptides at pH as low as 1.8. Benefiting from the large binding capacity at such low pH, MCN showed remarkable specificity to capture phosphopeptides from tryptic digests of standard protein mixtures as well as nonfat milk and human serum. In addition, MCN was also applied to selective enrichment of phosphopeptides from the tryptic digests of rat brain lysate and 2576 unique phosphopeptides were successfully identified.

Facile synthesis of magnetic carbon nitride nanosheets and its application in magnetic solid phase extraction for polycyclic aromatic hydrocarbons in edible oil samples.

In this study, we proposed a method to fabricate magnetic carbon nitride (CN) nanosheets by simple physical blending. Low-cost CN nanosheets prepared by urea possessed a highly π-conjugated structure; therefore the obtained composites were employed as magnetic solid-phase extraction (MSPE) sorbent for extraction of polycyclic aromatic hydrocarbons (PAHs) in edible oil samples. Moreover, sample pre-treatment time could be carried out within 10 min. Thus, a simple and cheap method for the analysis of PAHs in edible oil samples was established by coupling magnetic CN nanosheets-based MSPE with gas chromatography-mass spectrometry (GC/MS) analysis. Limits of quantitation (LOQs) for eight PAHs ranged from 0.4 to 0.9 ng/g. The intra- and inter-day relative standard deviations (RSDs) were less than 15.0%. The recoveries of PAHs for spiked soybean oil samples ranged from 91.0% to 124.1%, with RSDs of less than 10.2%. Taken together, the proposed method offers a simple and cost-effective option for the convenient analysis of PAHs in oil samples.

Hydrophilic Carboxyl Cotton Chelator for Titanium(IV) Immobilization and Its Application as Novel Fibrous Sorbent for Rapid Enrichment of Phosphopeptides.

Sample preparation methods with high selectivity, efficiency, and matrix resistance are essential for phosphoproteomic analysis. In this study, carboxyl cotton chelator-titanium(IV) (CCC-Ti4+) fibers, a novel CCC-based fibrous sorbent with excellent biocompatibility, were successfully synthesized on the basis of the coordination effect between double carboxyl groups on CCC and Ti4+. The synthesis of CCC-Ti4+ fibers was easy, and the incorporated titanium content was high. On the basis of immobilized metal ion affinity chromatography (IMAC), CCC-Ti4+ fibers were used for specific capture of phosphopeptides using a lab-in-syringe solid-phase extraction (SPE) from multiple biological samples, including standard protein digests, nonfat milk digests, human serum, and animal tissue. The proposed sorbent exhibited high selectivity (ß-casein/BSA=1:1000) and good sensitivity (10 fmol) in phosphopeptides analysis. Meanwhile, the lab-in-syringe SPE greatly simplified the entire process of enrichment. Thanks to the good biocompatibility of CCC-based material, CCC-Ti4+ fibers showed excellent performance in phosphopeptide enrichment from protein-rich human serum. Finally, CCC-Ti4+ fibers were applied for selective capture of phosphopeptides from tryptic digests of rat brain lysate followed by LC-MS/MS analysis. Using the proposed method, we identified 3950 unique phosphosites from 1 mg of rat brain in a single experiment, which is much better than previously reported IMAC-based strategies. Taken together, this efficient method will find broad application in large-scale phosphoproteomics analysis because of the rapid (3 min) convenient procedure and excellent performance.

Nickel(II)-immobilized sulfhydryl cotton fiber for selective binding and rapid separation of histidine-tagged proteins.

In the current study, a novel nickel(II)-immobilized sulfhydryl cotton fiber (SCF-Ni(2+)) was prepared in a simple way based on the coordination effect between Ni(2+) and thiol group on the surface of SCF. The composition and element mapping of SCF-Ni(2+) fibers were demonstrated by energy-dispersive X-ray (EDX) spectroscopy. Based on the high affinity of Ni(2+) to 6×His on histidine-tagged (His-tagged) proteins, SCF-Ni(2+) fibers were then further used as an immobilized metal ion affinity chromatography (IMAC) adsorbent for selective binding and rapid separation of His-tagged proteins using an in- pipette-tip SPE format. Our results showed that SCF-Ni(2+) adsorbent can selectively capture His-tagged proteins from protein mixture and Escherichia coli cell lysates. Taken together, the developed method provides a rapid, convenient and efficient approach for the purification of His-tagged proteins.

Facile synthesis of polyaniline-coated SiO2 nanofiber and its application in enrichment of fluoroquinolones from honey samples.

In this study, polyaniline coated SiO2 nanofibers (PANI/SiO2) was prepared by combining electrospinning technique with in-situ polymerization. The proposed strategy for the preparation of PANI/SiO2 can eliminate the aggregation of PANI and the yield of PANI/SiO2 was high. Scanning electron microscopy (SEM) images showed that PANI nanoparticles were uniformly coated on the surface of SiO2 nanofibers. The as-prepared PANI/SiO2 nanofibers were then applied as the sorbent for in-syringe dispersive solid-phase extraction (dSPE) for the extraction of fluoroquinolones (FQs) from honey samples. The influence of SiO2 amount on the formation of PANI/SiO2 and several parameters that affect the extraction efficiency were investigated. Under optimized conditions, a rapid, simple and effective method for the determination of FQs in honey sample was developed by coupling with liquid chromatography-fluorescence detector (LC-FLD) analysis. Due to the fast extraction equilibrium, the whole sample pretreatment process could be accomplished within 4 min. The limits of detection (LODs) for the target FQs were found to be 0.1-1.3 ng/g. The recoveries in honey sample were in the range of 81.4-118.1% with the RSDs of 0.8-14.4% (intra-day) and 1.4-14.9% (inter-day). This study offers a new strategy for the preparation of functional SiO2 nanofibers using post-electrospinning modification by in-situ polymerization, which could be generally applied in the preparation of various separation materials with electrospun nanofibers.

Electrospun highly ordered mesoporous silica-carbon composite nanofibers for rapid extraction and prefractionation of endogenous peptides.

A simple method was developed for the preparation of ordered mesoporous silica-carbon composite nanofibers (OMSCFs). The OMSCFs exhibited high carbon content, continuously long fibrous properties, uniform accessible mesopores, and a large surface area. The OMSCFs were also found to have ion-exchange capacity. On the basis of the size-exclusion effect of the mesopores and mixed-mode hydrophobic/ion-exchange interactions, the OMSCFs were applied for rapid enrichment of endogenous peptides by using a miniaturized solid-phase extraction format. The adsorption mechanism was studied, and the eluting solution was optimized with standard peptide/protein solutions and protein digests. Employing a successive three-step elution strategy, followed by LC-MS/MS analysis, led to excellent performance with this approach in the extraction and prefractionation of peptides from human serum.

Facile preparation of biocompatible sulfhydryl cotton fiber-based sorbents by "thiol-ene" click chemistry for biological analysis.

Sulfhydryl cotton fiber (SCF) has been widely used as adsorbent for a variety of metal ions since 1971. Thanks to the abundant thiols on SCF, in this study, we reported a universal method for the facile preparation of SCF-based materials using "thiol-ene" click chemistry for the first time. With the proposed method, two types of SCF-based materials, phenylboronic acid grafted sulfhydryl cotton fiber (SCF-PBA) and zirconium phosphonate-modified sulfhydryl cotton fiber (SCF-pVPA-Zr(4+)), were successfully prepared. The grafted functional groups onto the thiol group of SCF were demonstrated by X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX). The prepared fibrous materials exhibited excellent fiber strength, good stability in aqueous or nonaqueous solutions, and great biocompatibility. Moreover, we developed filter-free in-pipet-tip SPE using these SCF-based materials as adsorbent for the enrichment of ribonucleosides, glycopeptides and phosphopeptides. Our results showed that SCF-PBA adsorbent can selectively capture ribonucleosides and glycopeptides from complex biological samples. And SCF-pVPA-Zr(4+) adsorbent exhibited high selectivity and capacity in the enrichment of phosphopeptides from the digestion mixture of ß-casein and bovine serum albumin (BSA), as well as human serum and nonfat milk digest. Generally, the preparation strategy can be a universal method for the synthesis of other functionalized cotton-based adsorbents with special requirement in microscale biological analysis.

In-syringe dispersive solid phase extraction: a novel format for electrospun fiber based microextraction.

A novel in-syringe dispersive solid phase extraction (dSPE) system using electrospun silica fibers as adsorbents has been developed in the current work. A few milligrams of electrospun silica fibers were incubated in sample solution in the barrel of a syringe for microextraction assisted by vortex. Due to the benefit of dispersion and the high mass transfer rate of the sub-microscale electrospun silica fibers, the extraction equilibrium was achieved in a very short time (less than 1 min). Moreover, thanks to the long fibrous properties of electrospun fibers, the separation of the adsorbent from sample solution was easily achieved by pushing out the sample solution which therefore simplified the sample pretreatment procedure. Besides, the analytical throughput was largely increased by using a multi-syringe plate to perform the extraction experiment. The performance of the in-syringe dSPE device was evaluated by extraction of endogenous cytokinins from plant tissue samples based on the hydrophilic interaction. Six endogenous cytokinins in 20 mg of Oryza sativa L. (O. sativa) leaves were successfully determined under optimized conditions using in-syringe dSPE combined with liquid chromatography-mass spectrometry analysis. The results demonstrated that the in-syringe dSPE method was a rapid and high-throughput strategy for the extraction of target compounds, which has great potential in microscale sample pretreatment using electrospun fibers.

Electrospun polystyrene/oxidized carbon nanotubes film as both sorbent for thin film microextraction and matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

In the current study, polystyrene/oxidized carbon nanotubes (PS/OCNTs) film was prepared and applied as both an adsorbent of thin film microextraction (TFME) and matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) for the first time. The uniform size of PS/OCNTs film with OCNTs evenly and firmly immobilized in PS was obtained by electrospinning. And a novel TFME device was developed using the prepared PS/OCNTs film to enrich benzo[a]pyrene (BaP) from water, and also BaP and 1-hydroxypyrene (1-OHP) from urine sample. Then the extracted analytes on the PS/OCNTs film were directly applied to MALDI-MS analysis with PS/OCNTs film as the MALDI matrix. Our results show that PS/OCNTs film is a good TFME adsorbent toward the analytes and an excellent matrix for the sensitive determination of BaP and 1-OHP using MALDI-TOF-MS. The employment of PS/OCNTs as the matrix for MALDI can effectively avoid the large variation of signal intensity normally resulting from heterogeneous distribution of the adsorbed analyte on matrix layer, which therefore significantly improve spot-to-spot reproducibility. The introduction of PS in the film can prevent OCNTs from flying out of MALDI plate to damage the equipment. In addition, PS/OCNTs film also largely extended the duration of ion signal of target analyte compared to OCNTs matrix. The developed method was further successfully used to quantitatively determine BaP in environmental water and 1-OHP in urine samples. The results show that BaP and 1-OHP could be easily detected at concentrations of 50pgmL(-1) and 500pgmL(-1), respectively, indicating the high detection sensitivity of this method. For BaP analysis, the linear range was 0.1-20ngmL(-1) with a correlation coefficient of 0.9970 and the recoveries were in the range of 81.3 to 123.4% with the RSD≤8.5% (n=3); for urinary 1-OHP analysis, the linear range was 0.5-20ngmL(-1) with a correlation coefficient of 0.9937 and the recoveries were in the range of 79.2 to 103.4% with the RSD≤7.6% (n=3). Taken together, the developed method provides a simple, rapid, cost-effective and high-throughput approach for the analysis of BaP in environmental water and endogenous 1-OHP in urine samples.

Preparation of mesoporous silica embedded pipette tips for rapid enrichment of endogenous peptides.

Mesoporous silica embedded pipette tips (mSiO2-Tips) were successfully prepared by a simple method and applied to rapid enrichment of endogenous peptides for the first time. The prepared mSiO2-Tips showed low back pressure when solvent was pipetted up and down. As a result, mSiO2-Tip could selectively trap peptides and exclude high-MW proteins simultaneously based on size-exclusion mechanism due to the uniform mesopore structure of the sorbent bed. The in-pipette-tip SPE approach was proved to be easy-operation, sensitive and fast (less than 2 min) for the analysis of peptides, which was further successfully applied in the efficient enrichment of peptides from human plasma.