Geomagnetic Disturbances and Pulse Amplitude Anomalies Preceding M > 6 Earthquakes from 2021 to 2022 in Sichuan-Yunnan, China.

Compelling evidence has shown that geomagnetic disturbances in vertical intensity polarization before great earthquakes are promising precursors across diverse rupture conditions. However, the geomagnetic vertical intensity polarization method uses the spectrum of smooth signals, and the anomalous waveforms of seismic electromagnetic radiation, which are basically nonstationary, have not been adequately considered. By combining pulse amplitude analysis and an experimental study of the cumulative frequency of anomalies, we found that the pulse amplitudes before the 2022 Luding M6.8 earthquake show characteristics of multiple synchronous anomalies, with the highest (or higher) values occurring during the analyzed period. Similar synchronous anomalies were observed before the 2021 Yangbi M6.4 earthquake, the 2022 Lushan M6.1 earthquake and the 2022 Malcolm M6.0 earthquake, and these anomalies indicate migration from the periphery toward the epicenters over time. The synchronous changes are in line with the recognition of previous geomagnetic anomalies with characteristics of high values before an earthquake and gradual recovery after the earthquake. Our study suggests that the pulse amplitude is effective for extracting anomalies in geomagnetic vertical intensity polarization, especially in the presence of nonstationary signals when utilizing observations from multiple station arrays. Our findings highlight the importance of incorporating pulse amplitude analysis into earthquake prediction research on geomagnetic disturbances.

Electromagnetic Short-Term to Imminent Forecast Indices for M ≥ 5.5 Earthquakes in the Gansu-Qinghai-Sichuan Region of China.

Electromagnetic indices play a potential role in the forecast of short-term to imminent M ≥ 5.5 earthquakes and have good application prospects. However, despite possible progress in earthquake forecasting, concerns remain because it is difficult to obtain accurate epicenter forecasts based on different forecast indices, and the forecast time span is as large as months in areas with multiple earthquakes. In this study, based on the actual demand for short-term earthquake forecasts in the Gansu-Qinghai-Sichuan region of western China, we refined the construction of earthquake forecast indicators in view of the abundant electromagnetic anomalies before moderate and strong earthquakes. We revealed the advantageous forecast indicators of each method for the three primary earthquake elements (time, epicenter, magnitude) and the spatiotemporal evolution characteristics of the anomalies. The correlations between the magnitude, time, intensity, and electromagnetic anomalies of different M ≥ 5.5 earthquakes indicate that the combination of short-term electromagnetic indices is pivotal in earthquake forecasting.

Refinement of Different Frequency Bands of Geomagnetic Vertical Intensity Polarization Anomalies before M > 5.5 Earthquakes.

Geomagnetic vertical intensity polarization is a method with a clear mechanism, mature processing methods, and a strong ability to extract anomalous information in the quantitative analysis of seismogenic geomagnetic disturbances. The existing analyses of geomagnetic vertical intensity polarization are all based on the 5~100 s frequency band without refinement of the partitioning process. Although many successful results have been obtained, there are still two problems in the process of extracting anomalies: the geomagnetic anomalies that satisfy the determination criteria are still high in occurrence frequency; and the anomalies are distributed over too large an area in space, which leads to difficulties in determining the location of the epicenter. In this study, based on observations from western China, where fluxgate observation points are positioned in areas with frequent, densely distributed medium-strength earthquakes, we refined the frequency bands of geomagnetic vertical intensity polarization, recalculated the spatial and temporal evolution characteristics of geomagnetic disturbances before earthquakes, and improved the crossover frequency anomaly prediction index while promoting the application of the method in earthquake forecasting.

Portable, intelligent MIECL sensing platform for ciprofloxacin detection using a fast convolutional neural networks-assisted Tb@Lu2O3 nanoemitter.

Environmental pollution caused by ciprofloxacin is a major problem of global public health. A machine learning-assisted portable smartphone-based visualized molecularly imprinted electrochemiluminescence (MIECL) sensor was developed for the highly selective and sensitive detection of ciprofloxacin (CFX) in food. To boost the efficiency of electrochemiluminescence (ECL), oxygen vacancies (OVs) enrichment was introduced into the flower-like Tb@Lu2O3 nanoemitter. With the specific recognition reaction between MIP as capture probes and CFX as detection target, the ECL signal significantly decreased. According to, CFX analysis was determined by traditional ECL analyzer detector in the concentration range from 5 × 10-4 to 5 × 102 µmol L-1 with the detection limit (LOD) of 0.095 nmol L-1 (S/N = 3). Analysis of luminescence images using fast electrochemiluminescence judgment network (FEJ-Net) models, achieving portable and intelligent quick analysis of CFX. The proposed MIECL sensor was used for CFX analysis in real meat samples and satisfactory results, as well as efficient selectivity and good stability.

Tuning ferroelectric photovoltaic performance in R3c-CuNbO3 through compressive strain engineering: a first-principles study.

Most ferroelectric oxides exhibit relatively wide bandgaps, which pose limitations on their suitability for photovoltaics application. CuNbO3 possesses potential ferroelectric properties with an R3c polar structure that facilitate the separation of charge carriers under illumination, promoting the generation of photovoltaic effects. The optical and ferroelectric properties of R3c-CuNbO3, as well as the effect of strain on the properties are investigated by first-principles calculation in this paper. The calculated results indicate that R3c-CuNbO3 possesses a moderate band gap to absorb visible light. The interaction of Cu-O and Nb-O bonds is considered to have a crucial role in the photovoltaic properties of CuNbO3, contributing to the efficient absorption of visible light. The bandgap of CuNbO3 becomes smaller and the density of states near the conduction and valence bands becomes relatively uniform in distribution under compressive conditions, which improves the photoelectric conversion efficiency to 29.9% under conditions of bulk absorption saturation. The ferroelectric properties of CuNbO3 are driven by the Nb-O bond interactions, which are not significantly weakened by the compressive strain. CuNbO3 is expected to be an excellent ferroelectric photovoltaic material by modulation of compressive strain due to the stronger visible light absorption and excellent ferroelectric behavior.

Heterogeneous slab thermal dehydration driving warm subduction zone earthquakes.

Changing thermal regime is one of the key mechanisms driving seismogenic behaviors at cold megathrusts, but it is difficult to interpret warm subduction zones such as Vanuatu for the temperatures are higher than that accommodates shallow brittle failures. We construct a 3-D thermomechanical model to clarify the thermal structure that controls tectonic seismicity in Vanuatu and predict a warm circumstance associated with abundant seismicity. Results reveal a heterogeneous slab ranging from 300 °C to over 900 °C from the Moho to subvolcanic depth. The subduction seismicity corresponds well to the plate interface where dynamic thermal dehydration is focused. The transformation from hydrated basalts to eclogites along the slab facilitates the occurrence of intense earthquakes and slips. Multistage mineralogical metamorphism affects the dynamic stability of megathrusts and favors the generation of active interplate large events. Therefore, slab thermal dehydration plays a greater role than slab temperature condition in influencing the subduction earthquake distribution in warm subduction systems.

Variation in the thermal and dehydration regime below Central America: Insights for the seismogenic plate interface.

Slow earthquakes predominant in Costa Rica indicate unstable faulting of segmented Central American megathrusts, but the recurrence of episodic tremors and slips reported to precede a giant earthquake remains still enigmatic. The underlying mechanism is related to the variation in the coupling along the heterogeneous subduction interface which is poorly understood. In this study, we used up-to-date 3D thermal modeling to provide insights into the along-strike variation in the thermal state and hydraulic distribution beneath the Central American subduction zone. Our results show that the subducted Cocos Plate is much warmer than previously estimated, and the slab geometry exhibits remarkable perturbations along the trench. We found that the regions of large dehydration rate along the slab are consistent with the seismicity occurrence depth beneath the Moho. Below the Nicoya Peninsula and the Guatemala-Nicaragua segment of megathrusts, fluids derived from subducted slab result in increased pore fluid pressures and subsequent recurrence of slow slip events and regular earthquakes.

Present-Day Tectonic Stress Evolution in Southern Yunnan Based on Focal Mechanisms.

Tectonic extrusion bypassing the eastern Himalayan syntaxis results in a significant increase in regional stress instability and the associated frequent occurrence of earthquakes in southern Yunnan, China. However, the stress field, and the relationship between the focal mechanism of earthquakes and stress evolution in southern Yunnan, remain enigmatic. In this paper, using a modified grid point test method, we calculated the focal mechanism of ML ≥ 2.5 earthquakes in southern Yunnan (22-25° N, 100-104° E) from January 2009 to June 2023. Utilizing the solutions of historical earthquake focal mechanisms, we obtained the present-day regional tectonic stress field in southern Yunnan via inversion. The results indicate complex and diverse seismic focal mechanisms, and the main types of earthquakes are strike-slip events, followed by normal fault and reverse fault events. The orientations of the maximum and minimum principal stress axes rotate in a clockwise direction from northeast to southwest. The internal stress orientation distribution of the rhombic Sichuan-Yunnan block in the study area is consistent, and the block boundary zone is the site where stress deflection occurs, and the regional tectonic stress field is influenced by the interaction among different blocks. The distribution of R-value in the Lamping-Simao block gradually increases from north to south, indicating that the compressive stress required for material transport becomes relatively small. Combined with the geological and tectonic background of the study area, our results suggest that the speed of block movement gradually decreases from north to south; the distribution of R-value in the South China block is significantly smaller than that of the interior of the Sichuan-Yunnan rhombus, and the proportion of compressive stresses is larger, indicating a stronger extrusion in this region, which may be related to the fact that the Sichuan-Yunnan rhombus is strongly resisted by the South China block in the east.

Reestimation of slab dehydration fronts in Kuril-Kamchatka using updated global subduction zone thermal structures.

Previous subduction thermal models are inconsistent with the values of forearc heat flow (50-140 mW/m2) and global P‒T conditions of exhumed rocks, both suggesting a shallow environment 200-300°C warmer than model predictions. Here, we revaluate these problems in Kuril-Kamchatka using 3D thermomechanical modeling that satisfies the observed subduction history and slab geometry, while our refined 3D slab thermal state is warmer than that predicted by previous 2D models and better matches observational constraints. We show that warmer slabs create hierarchical slab dehydration fronts at various forearc depths, causing fast and slow subduction earthquakes. We conclude that fast-to-slow subduction earthquakes all play a key role in balancing plate coupling energy release on megathrusts trenchward of high P-T volcanism.

Enhanced Photocatalytic Activity of Two-Dimensional Polar Monolayer SiTe for Water-Splitting via Strain Engineering.

A two-dimensional (2D) polar monolayer with a polarization electric field can be used as a potential photocatalyst. In this work, first principle calculations were used to investigate the stability and photocatalytic properties of 2D polar monolayer SiTe as a potential promising catalyst in water-splitting. Our results show that the 2D polar monolayer SiTe possesses an indirect band gap of 2.41 eV, a polarization electric field from the (001) surface to the (001¯) surface, a wide absorption region, and a suitable band alignment for photocatalytic water-splitting. We also discovered that the photocatalytic activity of 2D polar monolayer SiTe could be effectively tuned through strain engineering. Additionally, strain engineering, particularly compressive strain in the range from -1% to -3%, can enhance the photocatalytic activity of 2D polar monolayer SiTe. Overall, our findings suggest that 2D polar monolayer SiTe has the potential to be a promising catalyst for photocatalytic water-splitting using visible light.

Subduction thermal regime, petrological metamorphism and seismicity under the Mariana arc.

Because of the steep subduction of a highly concave slab, researchers have characterized megathrusts under the Marianas as among the coldest and curviest plate coupling interfaces in various circum-Pacific subduction zones. Seismic tomography indicates that the heterogeneous underlying plate varies markedly in its subduction angle, velocity, and flexure along the strike and dip, while their effects on the thermal structure and intraslab earthquake occurrence remain enigmatic. By incorporating the 3-D MORVEL velocity and state-of-the-art slab geometry into thermomechanical modeling, we estimated the 3-D subduction thermal state and hydrothermal regime below the Marianas. We find that (1) the concave slab geometry and the complexity of the intraslab velocity variation in the Marianas are associated with a heterogeneous along-strike thermal regime and a cold mantle wedge beneath the central Marianas; (2) amphibolitization and eclogitization of subducted oceanic crust cause variations in fluid pressure and fluid release from the subduction interface, which may influence the distribution of interface seismicity in the Mariana system; (3) the concentration of active hydrothermal vents in the trench > 8 km deep is accompanied by a large temperature gradient and subsequent remarkable slab dehydration in the southern Marianas; and (4) slab dehydration (> 0.02 wt%/km) from 30 to 80 km indicates notable fluid release and potential fluid migration in subduction channels, which may correspond to the large water flux at depth beneath the Marianas.

Venous-arterial extracorporeal membrane oxygenation support for patients poisoned by Macleaya cordata.

Macleaya cordata is a Chinese herbal medicine containing a variety of highly cardiotoxic alkaloids, and might result in cardiac failure. Venous-arterial Extracorporeal membrane oxygenation (VA-ECMO) could be used as a therapeutic option in patients poisoned by Macleaya cordata complicating refractory cardiogenic shock or cardiac arrest. A 60-year-old man suffered from severe arrhythmia, cardiogenic shock and cardiac arrest after consuming Macleaya cordata. The patient received VA-ECMO support in the emergency department at 5 hours after hospitalization, and was weaned from VA-ECMO on day 4, and was discharged with complete clinical improvement on Day 12. VA-ECMO is an effective method in treating cardiogenic shock or cardiac arrest induced by severe poisoning from Chinese herbal medicine. Timely and appropriate interventions with venoarterial extracorporeal membrane oxygenation devices could improve clinical outcomes in these patients.

Theoretical study on the stability, ferroelectricity and photocatalytic properties of CaBiO3.

Materials with high ferroelectric polarization strength and sufficient absorption of visible light have unique advantages in photocatalysis. Based on the results of structure search, phonon frequency, and elasticity coefficient calculations, CaBiO3 has a stable R3 polar structure. First-principles calculations indicate that R3-CaBiO3 is a potentially efficient ferroelectric visible-light photocatalytic material for hydrogen production. CaBiO3 under slight strain can maintain high ferroelectric polarization strength, strong visible light absorption capacity and small effective mass. CaBiO3 under tensile strain has potentially ferroelectric photogeneration of hydrogen with a band edge position that crosses the redox potential of water. These results can expand the application of Bi-based materials in photocatalytic hydrogen production.

3-D data of thermal regime, water content, and slab dehydration in Alaska.

The data include the 3-D temperature field (degrees Celsius), water content (wt%), dehydration rate (wt%/km), and subduction velocity field (cm/yr) of the subducting plate, as well as the coastline and volcano distribution in Alaska. The data of the model region have dimensions of 800 × 1600 × 400 km (length × width × depth). The geometry of the subducted plate is well constrained by Slab2.0, and the plate ages are provided by EarthByte. The subduction velocities inside a prescribed 3-D constrained volume of the oceanic lithosphere are given based on the kinematic plate subduction modeling method and the MORVEL plate motion data. The observation of surface heat flow and Curie point depths are used to constrain the model thermal regime. The geophysical calculation is ensured after the subduction thermal regime reaches a steady state. Data are deposited in the TPDC repository, which has granted a persistent identifier https://data.tpdc.ac.cn/en/disallow/8b266d22-fea7-4259-9a5f-8ac0bd9e7869/. Data include (1) paraview_eq_USGS.vtk (earthquake catalog by IRIS, 2000-2010, Trabant et al., 2012), (2) paraview_slab.vtk (3-D thermal regime, slab water content and slab dehydration), (3) paraview_volcano.vtk (global volcanoes at NCEI, Siebert et al., 2010), and (4) paraview_map.vtk (coastline, GMT).

The RppC-AvrRppC NLR-effector interaction mediates the resistance to southern corn rust in maize.

Southern corn rust (SCR), caused by the fungal pathogen Puccinia polysora, is a major threat to maize production worldwide. Efficient breeding and deployment of resistant hybrids are key to achieving durable control of SCR. Here, we report the molecular cloning and characterization of RppC, which encodes an NLR-type immune receptor and is responsible for a major SCR resistance quantitative trait locus. Furthermore, we identified the corresponding avirulence effector, AvrRppC, which is secreted by P. polysora and triggers RppC-mediated resistance. Allelic variation of AvrRppC directly determines the effectiveness of RppC-mediated resistance, indicating that monitoring of AvrRppC variants in the field can guide the rational deployment of RppC-containing hybrids in maize production. Currently, RppC is the most frequently deployed SCR resistance gene in China, and a better understanding of its mode of action is critical for extending its durability.

Two-dimensional polarized MoTe2/GeS heterojunction with an intrinsic electric field for photocatalytic water-splitting.

The construction of van der Waals heterostructures based on 2D polarized materials is a unique technique to achieve enhanced photocatalytic performance. We have investigated the intrinsic electric field and photocatalytic properties of the MoTe2/GeS heterostructure via first-principles calculations. The results showed that a dipole-induced electric field induced by the GeS monolayer and an interface-induced electric field induced by the interface between the GeS monolayer and the MoTe2 monolayer emerge in the 2D polarized MoTe2/GeS heterostructure. The dipole-induced electric field contributes mainly to the total intrinsic electric field. Moreover, the 2D polarized MoTe2/GeS heterostructure possesses many excellent and distinguished photocatalytic performance parameters, such as a direct semiconductor bandgap of 1.524 eV, a wide light spectrum ranging from the ultraviolet to near-infrared region with a high absorption coefficient (about 106 cm-1), a total intrinsic electric field, which reduces the probability of the recombination of photo-generated electron-hole pairs effectively, and a suitable band alignment for the water-splitting reaction. These indicate that the 2D polarized MoTe2/GeS van der Waals heterostructure is a potential novel high-efficient photocatalyst for water-splitting.

Suppression of the Auger Recombination Process in CdSe/CdS Core/Shell Nanocrystals.

We investigate the Auger recombination (AR) rate in CdSe/CdS core/shell nanocrystals (NCs) under different interface confinements in terms of the interface bond relaxation mechanism and Fermi's golden rule. We find that the epitaxial layer of CdS can not only depress the influence of the Coulomb interaction between electrons and holes, but can also change the wave function and quantum confinement, resulting in the reduction of the AR rate. Moreover, the AR lifetime of CdSe/CdS core/shell NCs at a fixed entire dimension is lower than that of bare CdSe because of interface confinement of the wave function. A great drop of the AR rate can be achieved by adding an alloying layer that depresses the interface effect. Our predictions are in agreement with the available evidence, suggesting that the proposed approach could provide a general method to explore the AR process in core/shell NCs.

Enhanced photocatalytic activity for water splitting of blue-phase GeS and GeSe monolayers via biaxial straining.

The structural, electronic, dipole-induced internal electric field, optical and photocatalytic properties of monolayer GeS and GeSe under external biaxial strain were investigated by using first-principles calculations. The monolayer GeS and GeSe are indirect semiconductors with the band gaps of 3.265 eV and 2.993 eV, respectively. The band alignment of the monolayer GeS and GeSe manifests the photocatalytic activity for water splitting. Especially, it is effective to tune the properties including structures, band gaps, surface potential difference, dipole moment P, dipole-induced internal electric field, absorption and photocatalytic activity of the monolayer GeS and GeSe via biaxial strain. Our results suggest that monolayer GeS and GeSe possess photocatalytic properties for water splitting, and strain engineering, especially tensile strain, can enhance the photocatalytic activity under ultraviolet and visible light.

Rational design of metal organic framework-derived FeS2 hollow nanocages@reduced graphene oxide for K-ion storage.

K-ion batteries (KIBs) have become one of the promising alternatives to lithium ion batteries. In this work, we are the first to utilize reduced graphene oxide (RGO) wrapped metal organic framework-derived FeS2 hollow nanocages (FeS2@RGO) as an anode for KIBs. Owing to the synergistic effect from FeS2 nanocages and RGO shells, our FeS2@RGO sample exhibited superior electrochemical performance. Such FeS2@RGO electrodes demonstrate a high capacity of 264 mA h g-1 after 50 cycles at 50 mA g-1 and 123 mA h g-1 after 420 cycles even at a large current density of 500 mA g-1. More importantly, we also explain the electrochemical reaction process about FeS2 and believe that these results would open the door for a novel class of long cycling performance anode materials in the KIB field.

Effect of periodic number of [Si/Sb80Te20]x multilayer film on its laser-induced crystallization studied by coherent phonon spectroscopy.

The periodic number dependence of the femtosecond laser-induced crystallization threshold of [Si(5nm)/Sb80Te20(5nm)]x nanocomposite multilayer films has been investigated by coherent phonon spectroscopy. Coherent optical phonon spectra show that femtosecond laser-irradiated crystallization threshold of the multilayer films relies obviously on the periodic number of the multilayer films and decreases with the increasing periodic number. The mechanism of the periodic number dependence is also studied. Possible mechanisms of reflectivity and thermal conductivity losses as well as the effect of the glass substrate are ruled out, while the remaining superlattice structure effect is ascribed to be responsible for the periodic number dependence. The sheet resistance of multilayer films versus a lattice temperature is measured and shows a similar periodic number dependence with one of the laser irradiation crystallization power threshold. In addition, the periodic number dependence of the crystallization temperature can be fitted well with an experiential formula obtained by considering coupling exchange interactions between adjacent layers in a superlattice. Those results provide us with the evidence to support our viewpoint. Our results show that the periodic number of multilayer films may become another controllable parameter in the design and parameter optimization of multilayer phase change films.