RESUMEN
BACKGROUND: The World Health Organization considers malocclusion one of the most essential oral health problems. This disease influences various aspects of patients' health and well-being. Therefore, making it easier and more accurate to understand and diagnose patients with skeletal malocclusions is necessary. OBJECTIVES: The main aim of this research was the establishment of machine learning models to correctly classify individual Arab patients, being citizens of Israel, as skeletal class II or III. Secondary outcomes of the study included comparing cephalometric parameters between patients with skeletal class II and III and between age and gender-specific subgroups, an analysis of the correlation of various cephalometric variables, and principal component analysis in skeletal class diagnosis. METHODS: This quantitative, observational study is based on data from the Orthodontic Center, Jatt, Israel. The experimental data consisted of the coded records of 502 Arab patients diagnosed as Class II or III according to the Calculated_ANB. This parameter was defined as the difference between the measured ANB angle and the individualized ANB of Panagiotidis and Witt. In this observational study, we focused on the primary aim, i.e., the establishment of machine learning models for the correct classification of skeletal class II and III in a group of Arab orthodontic patients. For this purpose, various ML models and input data was tested after identifying the most relevant parameters by conducting a principal component analysis. As secondary outcomes this study compared the cephalometric parameters and analyzed their correlations between skeletal class II and III as well as between gender and age specific subgroups. RESULTS: Comparison of the two groups demonstrated significant differences between skeletal class II and class III patients. This was shown for the parameters NL-NSL angle, PFH/AFH ratio, SNA angle, SNB angle, SN-Ba angle. SN-Pg angle, and ML-NSL angle in skeletal class III patients, and for S-N (mm) in skeletal class II patients. In skeletal class II and skeletal class III patients, the results showed that the Calculated_ANB correlated well with many other cephalometric parameters. With the help of the Principal Component Analysis (PCA), it was possible to explain about 71% of the variation between the first two PCs. Finally, applying the stepwise forward Machine Learning models, it could be demonstrated that the model works only with the parameters Wits appraisal and SNB angle was able to predict the allocation of patients to either skeletal class II or III with an accuracy of 0.95, compared to a value of 0.99 when all parameters were used ("general model"). CONCLUSION: There is a significant relationship between many cephalometric parameters within the different groups of gender and age. This study highlights the high accuracy and power of Wits appraisal and the SNB angle in evaluating the classification of orthodontic malocclusion.
Asunto(s)
Árabes , Cefalometría , Aprendizaje Automático , Maloclusión de Angle Clase III , Maloclusión Clase II de Angle , Humanos , Masculino , Femenino , Maloclusión Clase II de Angle/patología , Maloclusión Clase II de Angle/diagnóstico por imagen , Adolescente , Maloclusión de Angle Clase III/patología , Análisis de Componente Principal , Israel , Niño , AdultoRESUMEN
Juvenile polyposis syndrome (JPS) is a rare autosomal dominant disorder characterized by multiple juvenile polyps in the gastrointestinal tract, often associated with mutations in genes such as Smad4 and BMPR1A. This study explores the impact of Smad4 knock-out on the development of intestinal polyps using collaborative cross (CC) mice, a genetically diverse model. Our results reveal a significant increase in intestinal polyps in Smad4 knock-out mice across the entire population, emphasizing the broad influence of Smad4 on polyposis. Sex-specific analyses demonstrate higher polyp counts in knock-out males and females compared to their WT counterparts, with distinct correlation patterns. Line-specific effects highlight the nuanced response to Smad4 knock-out, underscoring the importance of genetic variability. Multimorbidity heat maps offer insights into complex relationships between polyp counts, locations, and sizes. Heritability analysis reveals a significant genetic basis for polyp counts and sizes, while machine learning models, including k-nearest neighbors and linear regression, identify key predictors, enhancing our understanding of juvenile polyposis genetics. Overall, this study provides new information on understanding the intricate genetic interplay in the context of Smad4 knock-out, offering valuable insights that could inform the identification of potential therapeutic targets for juvenile polyposis and related diseases.
Asunto(s)
Modelos Animales de Enfermedad , Poliposis Intestinal , Síndromes Neoplásicos Hereditarios , Proteína Smad4 , Animales , Femenino , Masculino , Ratones , Ratones de Colaboración Cruzada/genética , Antecedentes Genéticos , Poliposis Intestinal/genética , Poliposis Intestinal/congénito , Poliposis Intestinal/patología , Pólipos Intestinales/genética , Pólipos Intestinales/patología , Ratones Noqueados , Síndromes Neoplásicos Hereditarios/genética , Proteína Smad4/genéticaRESUMEN
This study investigates the significance of skeletal transverse dimension (STD) in orthodontic therapy and its impact on occlusal relationships. The primary goal is to enhance understanding and promote the integration of transverse skeletal diagnostics into routine orthodontic assessments. To achieve this aim, the study employs a comprehensive approach, utilizing model analysis, clinical assessments, radiographic measurements, and occlusograms. The initial step involves a meticulous assessment of deficiencies in the maxilla, mainly focusing on transverse dimension issues. Various successful diagnostic methods are employed to ascertain the type and presence of these deficiencies. Furthermore, the study compares surgically assisted maxillary expansion (SARME) and orthopedic maxillary expansion (OME) in addressing skeletal transverse issues. Stability assessments and efficacy analyses are conducted to provide valuable insights into the superiority of SARME over OME. The findings reveal that proper evaluation of STD is crucial in orthodontic diagnosis, as overlooking transverse dimension issues can lead to complications such as increased masticatory muscle activity, occlusal interferences, and an elevated risk of gingival recession. Surgically assisted maxillary expansion emerges as a more stable solution than orthopedic methods. In conclusion, incorporating skeletal transverse diagnostics into routine orthodontic assessments is imperative for achieving optimal occlusal relationships and minimizing negative consequences on dentition, periodontium, and joints. The study emphasizes the significance of accurate three-dimensional assessments and recommends the consideration of SARME over OME for addressing skeletal transverse deficiencies. Finally, the Collaborative Cross (CC) mouse model is also a novel mouse model for studying complex traits. Exploring the Collaborative Cross mouse model opens avenues for future research, promising further insights into transverse skeletal issues in orthodontics.
RESUMEN
Head and neck squamous cell cancer (HNSCC) is a leading global malignancy. Every year, More than 830 000 people are diagnosed with HNSCC globally, with more than 430 000 fatalities. HNSCC is a deadly diverse malignancy with many tumor locations and biological characteristics. It originates from the squamous epithelium of the oral cavity, oropharynx, nasopharynx, larynx, and hypopharynx. The most frequently impacted regions are the tongue and larynx. Previous investigations have demonstrated the critical role of host genetic susceptibility in the progression of HNSCC. Despite the advances in our knowledge, the improved survival rate of HNSCC patients over the last 40 years has been limited. Failure to identify the molecular origins of development of HNSCC and the genetic basis of the disease and its biological heterogeneity impedes the development of new therapeutic methods. These results indicate a need to identify more genetic factors underlying this complex disease, which can be better used in early detection and prevention strategies. The lack of reliable animal models to investigate the underlying molecular processes is one of the most significant barriers to understanding HNSCC tumors. In this report, we explore and discuss potential research prospects utilizing the Collaborative Cross mouse model and crossing it to mice carrying single or double knockout genes (e.g. Smad4 and P53 genes) to identify genetic factors affecting the development of this complex disease using genome-wide association studies, epigenetics, microRNA, long noncoding RNA, lncRNA, histone modifications, methylation, phosphorylation, and proteomics.
Asunto(s)
Neoplasias de Cabeza y Cuello , ARN Largo no Codificante , Humanos , Animales , Ratones , Carcinoma de Células Escamosas de Cabeza y Cuello/genética , Neoplasias de Cabeza y Cuello/genética , Estudio de Asociación del Genoma Completo , Proteómica , Epigénesis GenéticaRESUMEN
Anterior open bite malocclusion is a complex dental condition characterized by a lack of contact or overlap between the upper and lower front teeth. It can lead to difficulties with speech, chewing, and biting. Its etiology is multifactorial, involving a combination of genetic, environmental, and developmental factors. Genetic studies have identified specific genes and signaling pathways involved in jaw growth, tooth eruption, and dental occlusion that may contribute to open bite development. Understanding the genetic and epigenetic factors contributing to skeletal open bite is crucial for developing effective prevention and treatment strategies. A thorough manual search was undertaken along with searches on PubMed, Scopus, Science Direct, and Web of Science for relevant studies published before June 2022. RCTs (clinical trials) and subsequent observational studies comprised the included studies. Orthodontic treatment is the primary approach for managing open bites, often involving braces, clear aligners, or other orthodontic appliances. In addition to orthodontic interventions, adjuvant therapies such as speech therapy and/or physiotherapy may be necessary. In some cases, surgical interventions may be necessary to correct underlying skeletal issues. Advancements in technology, such as 3D printing and computer-assisted design and manufacturing, have improved treatment precision and efficiency. Genetic research using animal models, such as the Collaborative Cross mouse population, offers insights into the genetic components of open bite and potential therapeutic targets. Identifying the underlying genetic factors and understanding their mechanisms can lead to the development of more precise treatments and preventive strategies for open bite. Here, we propose to perform human research using mouse models to generate debatable results. We anticipate that a genome-wide association study (GWAS) search for significant genes and their modifiers, an epigenetics-wide association study (EWAS), RNA-seq analysis, the integration of GWAS and expression-quantitative trait loci (eQTL), and micro-, small-, and long noncoding RNA analysis in tissues associated with open bite in humans and mice will uncover novel genes and genetic factors influencing this phenotype.
RESUMEN
Obesity and its attendant conditions have become major health problems worldwide, and obesity is currently ranked as the fifth most common cause of death globally. Complex environmental and genetic factors are causes of the current obesity epidemic. Diet, lifestyle, chemical exposure, and other confounding factors are difficult to manage in humans. The mice model is helpful in researching genetic BW gain because genetic and environmental risk factors can be controlled in mice. Studies in mouse strains with various genetic backgrounds and established genetic structures provide unparalleled opportunities to find and analyze trait-related genomic loci. In this study, we used the Collaborative Cross (CC), a large panel of recombinant inbred mouse strains, to present a predictive study using heterozygous Smad4 knockout profiles of CC mice to understand and effectively identify predispositions to body weight gain. Male C57Bl/6J Smad4+/- mice were mated with female mice from 10 different CC lines to create F1 mice (Smad4+/-x CC). Body weight (BW) was measured weekly until week 16 and then monthly until the end of the study (week 48). The heritability (H2) of the assessed traits was estimated and presented. Comparative analysis of various machine learning algorithms for predicting the BW changes and genotype of mice was conducted. Our data showed that the body weight records of F1 mice with different CC lines differed between wild-type and mutant Smad4 mice during the experiment. Genetic background affects weight gain and some lines gained more weight in the presence of heterozygous Smad4 knockout, while others gained less, but, in general, the mutation caused overweight mice, except for a few lines. In both control and mutant groups, female %BW had a higher heritability (H2) value than males. Additionally, both sexes with wild-type genotypes showed higher heritability values than the mutant group. Logistic regression provides the most accurate mouse genotype predictions using machine learning. We plan to validate the proposed method on more CC lines and mice per line to expand the literature on machine learning for BW prediction.
Asunto(s)
Ratones de Colaboración Cruzada , Obesidad , Animales , Femenino , Humanos , Masculino , Ratones , Peso Corporal/genética , Ratones Endogámicos C57BL , Ratones Endogámicos , Ratones Noqueados , Obesidad/genéticaRESUMEN
This review examines a prevalent condition with multifaceted etiology encompassing genetic, environmental, and oral behavioral factors. It stands as a significant ailment impacting oral functionality, aesthetics, and quality of life. Longitudinal studies indicate that malocclusion in primary dentition may progress to permanent malocclusion. Recognizing and managing malocclusion in primary dentition is gaining prominence. The World Health Organization ranks malocclusions as the third most widespread oral health issue globally. Angle's classification system is widely used to categorize malocclusions, with Class I occlusion considered the norm. However, its prevalence varies across populations due to genetic and examination disparities. Genetic factors, including variants in genes like MSX1, PAX9, and AXIN2, have been associated with an increased risk of Class I occlusion. This review aims to provide a comprehensive overview of clinical strategies for managing Class I occlusion and consolidate genetic insights from both human and murine populations. Additionally, genomic relationships among craniofacial genes will be assessed in individuals with Class I occlusion, along with a murine model, shedding light on phenotype-genotype associations of clinical relevance. The prevalence of Class I occlusion, its impact, and treatment approaches will be discussed, emphasizing the importance of early intervention. Additionally, the role of RNA alterations in skeletal Class I occlusion will be explored, focusing on variations in expression or structure that influence craniofacial development. Mouse models will be highlighted as crucial tools for investigating mandible size and prognathism and conducting QTL analysis to gain deeper genetic insights. This review amalgamates cellular, molecular, and clinical trait data to unravel correlations between malocclusion and Class I phenotypes.
RESUMEN
Deep bite is a malocclusion phenotype, defined as the misalignment in the vertical dimension of teeth and jaws and characterized by excessive overlap of the upper front teeth over the lower front teeth. Numerous factors, including genetics, environmental factors, and behavioral ones, might contribute to deep bite. In this study, we discuss the current clinical treatment strategies for deep bite, summarize the already published findings of genetic analysis associated with this complex phenotype, and their constraints. Finally, we propose a comprehensive roadmap to facilitate investigations for determining the genetic bases of this complex phenotype development. Initially, human deep bite phenotype, genetics of human deep bite, the prevalence of human deep bite, diagnosis, and treatment of human deep bite were the search terms for published publications. Here, we discuss these findings and their limitations and our view on future strategies for studying the genetic bases of this complex phenotype. New preventative and treatment methods for this widespread dental issue can be developed with the help of an understanding of the genetic and epigenetic variables that influence malocclusion. Additionally, malocclusion treatment may benefit from technological developments like 3D printing and computer-aided design and manufacture (CAD/CAM). These technologies enable the development of personalized surgical and orthodontic guidelines, enhancing the accuracy and effectiveness of treatment. Overall, the most significant results for the patient can only be achieved with a customized treatment plan created by an experienced orthodontic professional. To design a plan that meets the patient's specific requirements and expectations, open communication between the patient and the orthodontist is essential. Here, we propose to conduct a genome-wide association study (GWAS), RNAseq analysis, integrating GWAS and expression quantitative trait loci (eQTL), micro and small RNA, and long noncoding RNA analysis in tissues associated with deep bite malocclusion in human, and complement it by the same approaches in the collaborative cross (CC) mouse model which offer a novel platform for identifying genetic factors as a cause of deep bite in mice, and subsequently can then be translated to humans. An additional direct outcome of this study is discovering novel genetic elements to advance our knowledge of how this malocclusion phenotype develops and open the venue for early identification of patients carrying the susceptible genetic factors so that we can offer early prevention and treatment strategies, a step towards applying a personalized medicine approach.
RESUMEN
Depending on how severe it is, malocclusion, which may involve misaligned teeth, jaws, or a combination of the two, can hurt a person's overall facial aesthetics. The maxillary molar develops before the mandibular molar in class II malocclusion, which affects 15% of the population in the United States. With a retrusive mandible, patients typically have a convex profile. The goal of this study is to classify the skeletal and dental variability present in class II malocclusion, to reduce heterogeneity, present the current clinical treatment strategies, to summarize the previously published findings of genetic analysis, discuss these findings and their constraints, and finally, propose a comprehensive roadmap to facilitate investigations aimed at determining the genetic bases of malocclusion development using a variety of genomic approaches. To further comprehend the hereditary components involved in the onset and progression of class II malocclusion, a novel animal model for class II malocclusion should be developed while considering the variety of the human population. To overcome the constraints of the previous studies, here, we propose to conduct novel research on humans with the support of mouse models to produce contentious findings. We believe that carrying out a genome-wide association study (GWAS) on a large human cohort to search for significant genes and their modifiers; an epigenetics-wide association study (EWAS); RNA-seq analysis; integrating GWAS and the expression of quantitative trait loci (eQTL); and the testing of microRNAs, small RNAs, and long noncoding RNAs in tissues related to the skeletal class II malocclusion (SCIIMO) phenotype, such as mandibular bone, gum, and jaw in humans and the collaborative cross (CC) mouse model, will identify novel genes and genetic factors affecting this phenotype. We anticipate discovering novel genetic elements to advance our knowledge of how this malocclusion phenotype develops and open the venue for the early identification of patients carrying the susceptible genetic factors so that we can offer early prevention treatment strategies.
RESUMEN
INTRODUCTION: Skeletal abnormalities and malocclusions have varied features that impact populations globally, impairing aesthetics and lowering life quality. The prevalence of the Skeletal Class III disease is the lowest among all angle malocclusions, with varied prevalence across nations. Environmental, genetic, and societal factors play a role in its numerous etiologies. In this study, we conducted a thorough search across the published data relating to quantitative trait loci (QTL) and the genes associated with Class III progression in humans, discussed these findings and their limitations, and proposed future directions and strategies for studying this phenotype. METHODS: An inclusive search of published papers in the PubMed and Google Scholar search engines using the following terms: 1. Human skeletal Class III; 2. Genetics of Human skeletal Class III; 3. QTL mapping and gene associated with human skeletal Class III; 4. enriched skeletal Class-III-malocclusion-associated pathways. RESULTS: Our search has found 53 genes linked with skeletal Class III malocclusion reported in humans, genes associated with epigenetics and phenomena, and the top 20 enriched pathways associated with skeletal Class III malocclusion. CONCLUSIONS: The human investigations yielded some contentious conclusions. We conducted a genome-wide association study (GWAS), an epigenetics-wide association study (EWAS), RNA-seq analysis, integrating GWAS and expression quantitative trait loci (eQTL), micro- and small-RNA, and long non-coding RNA analysis in tissues connected to skeletal Class III malocclusion phenotype in tissues connected with the skeletal phenotype. Finally, we invite regional, national, and international orthodontists and surgeons to join this effort by contributing human samples with skeletal Class III malocclusion following the accepted Helsinki ethical protocol to challenge these phenomena jointly.
RESUMEN
Skeletal deformities and malocclusions being heterogeneous traits, affect populations worldwide, resulting in compromised esthetics and function and reduced quality of life. Skeletal Class III prevalence is the least common of all angle malocclusion classes, with a frequency of 7.2%, while Class II prevalence is approximately 27% on average, varying in different countries and between ethnic groups. Orthodontic malocclusions and skeletal deformities have multiple etiologies, often affected and underlined by environmental, genetic and social aspects. Here, we have conducted a comprehensive search throughout the published data until the time of writing this review for already reported quantitative trait loci (QTL) and genes associated with the development of skeletal deformation-associated phenotypes in different mouse models. Our search has found 72 significant QTL associated with the size of the mandible, the character, shape, centroid size and facial shape in mouse models. We propose that using the collaborative cross (CC), a highly diverse mouse reference genetic population, may offer a novel venue for identifying genetic factors as a cause for skeletal deformations, which may help to better understand Class III malocclusion-associated phenotype development in mice, which can be subsequently translated to humans. We suggest that by performing a genome-wide association study (GWAS), an epigenetics-wide association study (EWAS), RNAseq analysis, integrating GWAS and expression quantitative trait loci (eQTL), micro and small RNA, and long noncoding RNA analysis in tissues associated with skeletal deformation and Class III malocclusion characterization/phenotypes, including mandibular basic bone, gum, and jaw, in the CC mouse population, we expect to better identify genetic factors and better understand the development of this disease.
Asunto(s)
Maloclusión de Angle Clase III , Maloclusión , Humanos , Animales , Ratones , Estudio de Asociación del Genoma Completo , Calidad de Vida , Cefalometría/métodos , Maloclusión/genética , Maloclusión de Angle Clase III/genética , Mandíbula , FenotipoRESUMEN
Cancer is a major worldwide health problem, for which chemotherapy is a common treatment option. However drug toxicity and the development of resistance to chemotherapy are two main challenges associated with the traditional anticancer drugs. Combined pharmacological therapy based on different mechanisms might be an effective strategy in cancer treatment, and could exhibit a synergistic therapeutic efficacy. Herein, we aim to combine combretastatin A4 (CA4) and camptothecin (Cpt) chemically into a codrug through two hydrophilic linkers utilizing click chemistry to improve their water solubility and anticancer activity. The synthesized amphiphilic structure could self-assemble into a micelle structure as confirmed by atomic force microscopy (AFM) and dynamic light scattering (DLS), which showed a high stability and improved water solubility at pH 7.4, with a low critical micelle concentration (CMC) value of 0.9 mM. Moreover, in vitro hydrolysis was observed upon incubation of the hybrid compound with an esterase enzyme, which suggested a complete disassembly into the starting active drugs. Finally, cytotoxicity studies on HeLa cancer cells showed that the codrug demonstrated an enhanced (five fold) cytotoxicity as compared with the free drugs. In addition the combination index (CI) was <1, which suggests a synergistic activity for the codrug. Moreover, the tested concentrations of the codrug were not significantly cytotoxic to a noncancerous fibroblast cell line. The imaging of HeLa cells treated with FITC-loaded micelles showed a rapid internalization. In conclusion, the codrug of CA4 and Cpt might be a potential novel anticancer drug as it demonstrated a synergistic cytotoxic activity that might spare noncancerous cells.