RESUMEN
Electrochemically reconstructed Cu-based catalysts always exhibit enhanced CO2 electroreduction performance; however, it still remains ambiguous whether the reconstructed Cu vacancies have a substantial impact on CO2-to-C2+ reactivity. Herein, Cu vacancies are first constructed through electrochemical reduction of Cu-based nanowires, in which high-angle annular dark-field scanning transmission electron microscopy image manifests the formation of triple-copper-vacancy associates with different concentrations, confirmed by positron annihilation lifetime spectroscopy. In situ attenuated total reflection-surface enhanced infrared absorption spectroscopy discloses the triple-copper-vacancy associates favor *CO adsorption and fast *CO dimerization. Moreover, density-functional-theory calculations unravel the triple-copper-vacancy associates endow the nearby Cu sites with enriched and disparate local charge density, which enhances the *CO adsorption and reduces the CO-CO coupling barrier, affirmed by the decreased *CO dimerization energy barrier by 0.4 eV. As a result, the triple-copper-vacancy associates confined in Cu nanowires achieve a high Faradaic efficiency of over 80% for C2+ products in a wide current density range of 400-800 mA cm-2, outperforming most reported Cu-based electrocatalysts.
RESUMEN
The goal of photocatalytic CO2 reduction system is to achieve near 100 % selectivity for the desirable product with reasonably high yield and stability. Here, two-dimensional metal-organic frameworks are constructed with abundant and uniform monometallic active sites, aiming to be an emerged platform for efficient and selective CO2 reduction. As an example, water-stable Cu-based metal-organic framework nanoribbons with coordinatively unsaturated single CuII sites are first fabricated, evidenced by X-ray diffraction patterns and X-ray absorption spectroscopy. In situ Fourier-transform infrared spectra and Gibbs free energy calculations unravel the formation of the key intermediate COOH* and CO* is an exothermic and spontaneous process, whereas the competitive hydrogen evolution reaction is endothermic and non-spontaneous, which accounts for the selective CO2 reduction. As a result, in an aqueous solution containing 1â mol L-1 KHCO3 and without any sacrifice reagent, the water-stable Cu-based metal-organic framework nanoribbons exhibited an average CO yield of 82â µmol g-1 h-1 with the selectivity up to 97 % during 72â h cycling test, which is comparable to other reported photocatalysts under similar conditions.
RESUMEN
Drug impurities are important factors that affect drug safety and efficacy. The aim of this study is to separate and confirm the structure of two degradation impurities of esomeprazole sodium, designated X and Y. The impurities X and Y were successfully isolated using preparative HPLC by developing separation methods with the help of ACD/Labs AutoChrom software. There was a steady increase in X and Y impurities in forced esomeprazole sodium degradation. Impurity X was confirmed as 6-methoxy-1h-benzo[d]imidazole-2-yl-4-amino-3,5-dimethylpyridinecarboxylate and impurity Y as 6-methoxy-1h-benzo[d]imidazole-2-yl-4-hydroxy-3,5-dimethylpyridinecarboxylate using nuclear magnetic resonance spectrometry, infrared spectroscopy, and high-resolution mass spectrometry. These findings provide a comprehensive understanding of the impurity profile of esomeprazole sodium because these impurities are reported for the first time. Based on our results, active pharmaceutical ingredient manufacturers can further control process parameters to reduce impurity generation, and drug production manufacturers can optimize the packaging and storage conditions of esomeprazole sodium.
Asunto(s)
Esomeprazol , Imidazoles , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Cromatografía Líquida de Alta Presión/métodos , Contaminación de MedicamentosRESUMEN
Herein, we first design a model of reversible redox-switching metal-organic framework single-unit-cell sheets, where the abundant metal single sites benefit for highly selective CO2 reduction, while the reversible redox-switching metal sites can effectively activate CO2 molecules. Taking the synthetic Cu-MOF single-unit-cell sheets as an example, synchrotron-radiation quasi in situ X-ray photoelectron spectra unravel the reversible switching CuII /CuI single sites initially accept photoexcited electrons and then donate them to CO2 molecules, which favors the rate-liming activation into CO2 δ- , verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu-MOF single-unit-cell sheets achieve near 100 % selectivity for CO2 photoreduction to CO with a high rate of 860⠵mol g-1 h-1 without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions.
RESUMEN
Here, noble-metal-doped two-dimensional metal oxide nanosheets are designed to realize selective CO2 photoreduction to CH4 . As a prototype, Pd-doped CeO2 nanosheets are fabricated, where the active sites of Pdδ+ (2<δ<4) and Ce3+ -Ov are revealed by quasi in situ X-ray photoelectron spectra and in situ electron paramagnetic resonance spectra. Moreover, in situ Fourier-transform infrared spectra of D2 O photodissociation and desorption verify the existence of the Pd-OD bond, implying that Pdδ+ sites can participate in water oxidation to deliver H* species for facilitating the protonation of the intermediates. Furthermore, theoretical calculations suggest the Pd doping could regulate the formation energy barrier of the key intermediates CO* and CH3 O*, thus making CO2 reduction to CH4 become the favorable process. Accordingly, Pd-doped CeO2 nanosheets achieve nearly 100 % CH4 selectivity of CO2 photoreduction, with the raising CH4 evolution rate of 41.6⠵mol g-1 h-1 .
RESUMEN
CO2 electroreduction to high-energy-density C2+ products is highly attractive, whereas the C2+ selectivity under industrial current densities is still unsatisfying. Here, an anti-swelling anion exchange ionomer (AEI) was first proposed to optimize the local environment for promoting industrial-current-density CO2-to-C2+ electroreduction. Taking the anti-swelling AEI-modified oxide-derived Cu nanosheets as an example, in situ Raman spectroscopy and contact angle measurements revealed that the OH--accumulated -N(CH3)3+ groups and anti-swelling backbone of AEI could synergistically regulate the local pH level and water content. In situ Fourier-transform infrared spectroscopy and theoretical calculations demonstrated that the higher local pH value could lower the energy barrier for the rate-limiting COCO* hydrogenated to COCOH* from 0.08 to 0.04 eV, thereby boosting the generation of C2+ products. Owing to the anti-swelling backbone, the optimized water content of 3.5% could suppress the competing H2 evolution and hence facilitate the proton-electron transfer step for C2+ production. As a result, the anti-swelling AEI-modified oxide-derived Cu nanosheets achieved a C2+ Faradaic efficiency of 85.1% at a current density up to 800 mA cm-2 with a half-cell power conversion efficiency exceeding 50%, outperforming most reported powder catalysts.
RESUMEN
Direct CH4 photoconversion into liquid oxygenates under mild conditions still represents a huge challenge. Herein, two-dimensional oxide semiconductors are designed to generate abundant active O- species for activating C-H bond of methane. Taking the synthetic ZnO nanosheets as an example, in situ electron paramagnetic resonance spectra verified their lattice oxygen atoms could capture photoexcited holes and generate active O- species, which could efficiently abstract H from CH4 to generate ·CH3 radicals. Gibbs free energy calculations and in situ Fourier-transform infrared spectroscopy corroborated the rate-limiting step was the first C-H bond activation process, whereas the exoergic oxidation of *CHO to HCOOH was easier than the endoergic overoxidation to CO, accounting for the selective production of liquid oxygenates. As a result, the formation rate of liquid oxygenates over ZnO nanosheets reached 2.21 mmol g-1 h-1 with a selectivity of 90.7% at atmospheric pressure and approximately 50 °C, outperforming previously reported photocatalysts under similar conditions.
RESUMEN
Herein, we first design a fast low-pressure ultraviolet light irradiation strategy for easily regenerating the nearly equivalent surface vacancies. Taking the defective Bi2 O2 CO3 nanosheets as an example, nearly equal amount of oxygen vacancies can be regenerated under UV light irradiation. Synchrotron-radiation quasi in situ X-ray photoelectron spectra disclose the Bi sites in the O-defective Bi2 O2 CO3 nanosheets can act as the highly active sites, which not only help to activate CO2 molecules, but also contribute to stabilizing the rate-limiting COOH* intermediate. Also, in situ Fourier transform infrared spectroscopy and in situ mass spectrometry unravel the UV light irradiation contributes to accelerating CO desorption process. As a result, the O-defective Bi2 O2 CO3 nanosheets achieve a stability up to 2640â h over 110 cycling tests and a high evolution rate of 275â µmol g-1 h-1 for visible-light-driven CO2 reduction to CO.
RESUMEN
Selective CO2 photoreduction into a high-energy-density C2 product is still challenging. Here, charge-polarized metal pair sites are designed to trigger C-C coupling through manipulating asymmetric charge distribution on the reduction intermediates. Taking the synthetic partially reduced Co3O4 nanosheets as an example, theoretical calculations unveil the asymmetric charge distribution on surface cobalt sites. The formed charge-polarized cobalt pair sites not only donate electrons to CO2 molecules but also accelerate the coupling of asymmetric COOH* intermediates through lowering the energy barrier from 0.680 to 0.240 eV, affirmed by quasi in situ X-ray photoelectron spectroscopy and Gibbs free energy calculations. Also, the electron-rich cobalt sites strengthen their interaction with O of the HOOC-CH2O* intermediate, which favors the C-O bond cleavage and hence facilitates the rate-limiting CH3COOH desorption process. The partially reduced Co3O4 nanosheets achieve 92.5% selectivity of CH3COOH in simulated air, while the CO2-to-CH3COOH conversion ratio is 2.75%, obviously higher than that in pure CO2.
RESUMEN
ConspectusExcessive use of fossil fuels has not only led to energy shortage but also caused serious environmental pollution problems due to the massive emissions of industrial waste gas. As the main component of industrial waste gas, CO2 molecules can also be utilized as an important raw material for renewable fuels. Thus, the effective capture and conversion of CO2 has been considered one of the best potential strategies to mitigate the energy crisis and lower the greenhouse effect simultaneously.In this case, CO2 electroreduction to high-value-added chemicals provides an available approach to accomplish this important goal. Nonetheless, the CO2 molecule is extremely stable with a high dissociation energy. With regard to the traditional electrocatalytic systems, there are three main factors that hinder their practical applications: (i) sluggish carrier transport dynamics; (ii) high energy barrier for CO2 activation; (iii) poor product selectivity. Therefore, solving these three crucial problems is the key to the development of efficient electrocatalytic CO2 reduction systems.Considering that the CO2 molecule is a typical Lewis acid with a high first ionization energy and electronic affinity, electron-rich catalysts could help to activate the CO2 molecule and improve the conversion efficiency. In view of this, atomically thin two-dimensional electrocatalysts, benefiting from their significantly increased density of states near the Fermi level, have great potential to effectively accelerate the dynamics of electron transport. Moreover, their high fraction of surface active sites and enhanced local charge density could remarkably reduce the energy barrier for CO2 activation. Furthermore, their modulated electronic structure could alter the catalytic reaction pathway and improve the product selectivity. Meanwhile, the concise two-dimensional configuration facilitates in situ characterization as well as the establishment and simulation of theoretical models, which helps to reveal the mechanism of electrocatalytic CO2 reduction, thereby speeding up the development of CO2 conversion technology.In this Account, we summarize recent progress in tailoring the electronic structure of atomically thin two-dimensional electrocatalysts by different methods. Meanwhile, we highlight the structure-property relationship between the electronic structure regulation and the catalytic activity/product selectivity of atomically thin two-dimensional electrocatalysts, and discuss the underlying fundamental mechanism with the aid of in situ characterization techniques. Finally, we discuss the major challenges and opportunities for the future development of CO2 electroreduction. It is expected that this Account will help researchers to better understand CO2 electroreduction and guide better design of high-performance electrocatalytic systems.
RESUMEN
Electrocatalytic CO2 reduction at considerably low overpotentials still remains a great challenge. Here, a positively charged single-atom metal electrocatalyst to largely reduce the overpotentials is designed and hence CO2 electroreduction performance is accelerated. Taking the metal Sn as an example, kilogram-scale single-atom Snδ + on N-doped graphene is first fabricated by a quick freeze-vacuum drying-calcination method. Synchrotron-radiation X-ray absorption fine structure and high-angle annular dark-field scanning transmission electron microscopy demonstrate the atomically dispersed Sn atoms are positively charged, which enables CO2 activation and protonation to proceed spontaneously through stabilizing CO2 â¢- * and HCOO- *, affirmed by in situ Fourier transform infrared spectra and Gibbs free energy calculations. Furthermore, N-doping facilitates the rate-limiting formate desorption step, verified by the decreased desorption energy from 2.16 to 1.01 eV and the elongated SnHCOO- bond length. As an result, single-atom Snδ + on N-doped graphene exhibits a very low onset overpotential down to 60 mV for formate production and shows a very large turnover frequency up to 11930 h-1 , while its electroreduction activity proceeds without deactivation even after 200 h. This work offers a new pathway for manipulating electrocatalytic performance.
RESUMEN
The role of oxygen vacancies in carbon dioxide electroreduction remains somewhat unclear. Here we construct a model of oxygen vacancies confined in atomic layer, taking the synthetic oxygen-deficient cobalt oxide single-unit-cell layers as an example. Density functional theory calculations demonstrate the main defect is the oxygen(II) vacancy, while X-ray absorption fine structure spectroscopy reveals their distinct oxygen vacancy concentrations. Proton transfer is theoretically/experimentally demonstrated to be a rate-limiting step, while energy calculations unveil that the presence of oxygen(II) vacancies lower the rate-limiting activation barrier from 0.51 to 0.40 eV via stabilizing the formate anion radical intermediate, confirmed by the lowered onset potential from 0.81 to 0.78 V and decreased Tafel slope from 48 to 37 mV dec-1. Hence, vacancy-rich cobalt oxide single-unit-cell layers exhibit current densities of 2.7 mA cm-2 with ca. 85% formate selectivity during 40-h tests. This work establishes a clear atomic-level correlation between oxygen vacancies and carbon dioxide electroreduction.
RESUMEN
Unearthing an ideal model for disclosing the role of defect sites in solar CO2 reduction remains a great challenge. Here, freestanding gram-scale single-unit-cell o-BiVO4 layers are successfully synthesized for the first time. Positron annihilation spectrometry and X-ray fluorescence unveil their distinct vanadium vacancy concentrations. Density functional calculations reveal that the introduction of vanadium vacancies brings a new defect level and higher hole concentration near Fermi level, resulting in increased photoabsorption and superior electronic conductivity. The higher surface photovoltage intensity of single-unit-cell o-BiVO4 layers with rich vanadium vacancies ensures their higher carriers separation efficiency, further confirmed by the increased carriers lifetime from 74.5 to 143.6 ns revealed by time-resolved fluorescence emission decay spectra. As a result, single-unit-cell o-BiVO4 layers with rich vanadium vacancies exhibit a high methanol formation rate up to 398.3 µmol g-1 h-1 and an apparent quantum efficiency of 5.96% at 350 nm, much larger than that of single-unit-cell o-BiVO4 layers with poor vanadium vacancies, and also the former's catalytic activity proceeds without deactivation even after 96 h. This highly efficient and spectrally stable CO2 photoconversion performances hold great promise for practical implementation of solar fuel production.
RESUMEN
Electroreduction of CO2 into hydrocarbons could contribute to alleviating energy crisis and global warming. However, conventional electrocatalysts usually suffer from low energetic efficiency and poor durability. Herein, atomic layers for transition-metal oxides are proposed to address these problems through offering an ultralarge fraction of active sites, high electronic conductivity, and superior structural stability. As a prototype, 1.72 and 3.51â nm thick Co3O4 layers were synthesized through a fast-heating strategy. The atomic thickness endowed Co3O4 with abundant active sites, ensuring a large CO2 adsorption amount. The increased and more dispersed charge density near Fermi level allowed for enhanced electronic conductivity. The 1.72â nm thick Co3O4 layers showed over 1.5 and 20 times higher electrocatalytic activity than 3.51â nm thick Co3O4 layers and bulk counterpart, respectively. Also, 1.72â nm thick Co3O4 layers showed formate Faradaic efficiency of over 60% in 20â h.
RESUMEN
Abnormal DNA methylation patterns caused by altered DNA methyltransferase (MTase) activity are closely associated with cancer. Herein, using DNA adenine methylation methyltransferase (Dam MTase) as a model analyte, we designed an allosteric molecular beacon (aMB) for sensitive detection of Dam MTase activity. When the specific site in an aMB is methylated by Dam MTase, the probe can be cut by the restriction nuclease DpnI to release a fluorophore labeled aptamer specific for streptavidin (SA) which will bind to SA beads to generate highly fluorescent beads for easy signal readout by a microscope or flow cytometer. However, aMBs maintain a hairpin structure without the binding ability to SA beads in the absence of Dam MTase, leading to weakly fluorescent SA beads. Unlike the existing signal amplified assays, our method is simpler and more convenient. The high performance of the aptamer and the easy bead separation process make this probe superior to other methods for the detection of MTase in complex biological systems. Overall, the proposed method with a detection limit of 0.57 U mL(-1) for Dam MTase shows great potential for further applications in the detection of other MTases, screening of MTase inhibitors, and early diagnosis of cancer.