Nanomodified bamboo (Phyllostachys aurea) biomass: its adsorbent features in the removal of dyes from water under high salinity conditions.

The effluent generated by textile industries is among the most polluting to the environment. Dyes such as methylene blue (MB) and indigo blue (IB) are used in cotton dyeing. This work proposes to evaluate the potential of in natura (BIN) and nanomodified (BNP) bamboo (Phyllostachys aurea) biomass as biosorbents for the removal of MB and IB dyes in an aqueous medium under high salinity conditions. These materials were characterized by Fourier transform infrared (FTIR) and X-ray (XRD) spectroscopies and scanning electron microscopy (SEM) to investigate their morphology and interaction with the dyes and the nanoparticles. The FTIR spectra revealed the existence of hydroxyl and carbonyl groups, ethers, phenols, and aromatic compounds, indicating the presence of a lignocellulosic structure. XRD and SEM analyses confirmed the effectiveness of the nanocomposite synthesis process. The dyes were quantified by ultraviolet-visible spectroscopy (UV/Vis). The material's pH at the point of zero charge (pHPZC) was 5.52 (BIN) and 4.84 (BNP), and the best IB and MB sorption pH were 3.0 and 9.0 for BNP, respectively, employing 30 min of contact time. The material sorption capacity (Qexp) was assessed using batch procedures, in which 100-1000 mg/L dye concentrations were tested with a 0.5 g/L adsorbent dose. The dye's Qexp for BIN and BNP was 25.41 ± 0.58 and 23.42 ± 0.07 mg/g (MB) and 84.26 ± 1.1 and 130.81 ± 0.20 mg/g (IB), respectively. The kinetic model that best fit BNP experimental data was the pseudo-2nd-order with r2 = 0.99868 (MB) and r2 = 0.99873 (IB), and Freundlich, D-R, and Temkin isotherms best fit the dye sorption data. The bamboo nanomodification facilitates the biosorbent removal from the medium after sorption, enabling large-scale studies and industrial applications-the investigated materials provided promising adsorption features for removing contaminant dyes in saline water.

Physiological and biomolecular interventions in the bio-decolorization of Methylene blue dye by Salvinia molesta D. Mitch.

Methylene blue, a cationic dye as a pollutant is discharged from industrial effluent into aquatic bodies. The dye is biomagnified through the food chain and is detrimental to the sustainability of aquatic flora. Despite of number of physico-chemical techniques of dye removal, the use of aquatic flora for bio-adsorption is encouraged. Thus, we used Salvinia molesta D. Mitch in bio-reduction of methylene blue on concentrations of 0, 10, 20, and 30 mg L-1 through 5 days with biosorption kinetics. The dye removal was concentration-dependent, maximized at 2 days with 30 mg L-1 which altered the relative growth rate (44%) of plants. Biosorption recorded 71% capacity at optimum pH (8.0), 24 h reducing major bond energies of amide, hydroxyl groups, etc. Bioaccumulation of dye changed potassium content (446%) under maximum dye concentration modifying tissues for dye sequestration. Reactive oxygen species were altered on dye reduction by oxidase (33%) with redox homeostasis by enzymes. Plants altered the metabolism with over accumulation of polyamines (51%), abscisic acids (448%), and phosphoenolpyruvate carboxylase (83%) on dye reduction. Thus, this study is rationalized with a sustainable approach where aquatic ecosystems can be decontaminated from dye toxicity with the exercise of bioresources like Salvinia molesta D. Mitch as herein.

Azo dyes as industrial effluents are more hazardous with their high solubility in water causing inhibition of life processes in aquatic ecosystem. Methylene blue as a dye, in the aquatic environment deteriorates the ecosystem by increasing a chemical oxygen demand, impairing light harnessing mechanism, inhibiting growth of microflora, recalcitrance, bioaccumulation, mutagenicity of the whole environment. Aquatic weed like Salvinia molesta D. Mitch is evident as an effective bio-adsorbent, bio-decolorization, finally dye removing material to reduce water pollution as an alternative strategy for environmental remediation.

Biosorption of Cr(VI) by Theobroma cacao pericarp.

This paper reports a comprehensive study of Theobroma cacao pericarp (TCP) residues, which has been prepared, characterized, and tested as an inexpensive and efficient biosorbent of Cr(VI) from aqueous solutions. The maximum adsorption capacity of TCP obtained at optimal conditions (pH = 2, dose = 0.5 g L-1, C0 = 100 mg L-1) was qmax = 48.5 mg g-1, which is one of the highest values reported by the literature. Structural and morphological characterization has been performed by FTIR, SEM/EDX, and pHPZC measurements. FTIR analysis revealed the presence of O-H, -NH, -NH2, C = H, C = O, C = C, C-O, and C-C functional groups that would be involved in the Cr(VI) biosorption processes. The experimental equilibrium data of biosorption process were successfully fitted to non-linear Langmuir (R2 = 0.95, χ2 = 11.0), Freundlich (R2 = 0.93, χ2 = 14.8), and Temkin (R2 = 0.93, χ2 = 14.7) isotherm models. Kinetics experimental data were well adjustment to non-linear pseudo-2nd (R2 = 0.99, χ2 = 2.08)- and pseudo-1st-order kinetic models (R2 = 0.98, χ2 = 2.25) and also to intra-particle Weber-Morris (R2 = 0.98) and liquid film diffusion (R2 = 0.99) models. These results indicate that Cr(VI) biosorption on heterogeneous surfaces as well as on monolayers of TCP would be a complex process controlled by chemisorption and physisorption mechanisms. The thermodynamic results indicate that the Cr(VI) biosorption on TCP is a feasible, spontaneous, and endothermic process. TCP can be regenerated with NaOH and reused up to 3 times.

Improving the adsorption properties of low surface area hardwood biochar for the removal of Fe+ and PO43- from aqueous solution.

Biochar produced from wood residues may provide a new method and material for managing the environment, particularly in terms of carbon sequestration and contaminant remediation. Additionally, biochar produced from wood residues is free of chemical fertilizers, likewise in rice straw, wheat straw, corn straw, etc. This study investigated the removal of iron from aqueous solutions by a novel low-cost and eco-friendly biochar made from hardwood trees and modified by adding MgCl2 for effective phosphate removal. Optimal adsorption conditions were determined through studies of adsorption time, pH, and adsorbent dosage. Batch equilibrium isotherm and kinetic experiments and pre/post-adsorption characterizations using FESEM-EDS, XRD, and FTIR suggested that the presence of carboxyl group elements and colloidal and nano-sized MgO (periclase) particles on the biochar surface were the main adsorption sites for aqueous iron and phosphate respectively. In this study, the HW and MgO-HW biochar showed excellent Dubinin-Radushkevich isotherm (D-R) maximum adsorption capacities of 289.45 and 828.82 mg/g for iron and phosphate. The kinetic study for iron and phosphate adsorption was described well by pseudo second-order model and pseudo second-order model respectively. The HW biochar and the prepared MgO-HW biochar exhibited commendable iron adsorption (98.25%) performance at 10 pH units and phosphate (96.22%) at pH 6 respectively. Thus, this research reveals a waste-to-wealth strategy by converting hardwood waste into mineral-biomass biochar with excellent Fe and P adsorption capabilities and environmental adaptability.

Genome and pan-genome analysis of a new exopolysaccharide-producing bacterium Pyschrobacillus sp. isolated from iron ores deposit and insights into iron uptake.

Bacterial exopolysaccharides (EPS) have emerged as one of the key players in the field of heavy metal-contaminated environmental bioremediation. This study aimed to characterize and evaluate the metal biosorption potential of EPS produced by a novel Psychrobacillus strain, NEAU-3TGS, isolated from an iron ore deposit at Tamra iron mine, northern Tunisia. Genomic and pan-genomic analysis of NEAU-3TGS bacterium with nine validated published Psychrobacillus species was also performed. The results showed that the NEAU-3TGS genome (4.48 Mb) had a mean GC content of 36%, 4,243 coding sequences and 14 RNA genes. Phylogenomic analysis and calculation of nucleotide identity (ANI) values (less than 95% for new species with all strains) confirmed that NEAU-3TGS represents a potential new species. Pangenomic analysis revealed that Psychrobacillus genomic diversity represents an "open" pangenome model with 33,091 homologous genes, including 65 core, 3,738 shell, and 29,288 cloud genes. Structural EPS characterization by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy showed uronic acid and α-1,4-glycosidic bonds as dominant components of the EPS. X-ray diffraction (XRD) analysis revealed the presence of chitin, chitosan, and calcite CaCO3 and confirmed the amorphous nature of the EPS. Heavy metal bioabsorption assessment showed that iron and lead were more adsorbed than copper and cadmium. Notably, the optimum activity was observed at 37°C, pH=7 and after 3 h contact of EPS with each metal. Genomic insights on iron acquisition and metabolism in Psychrobacillus sp. NEAU-3TGS suggested that no genes involved in siderophore biosynthesis were found, and only the gene cluster FeuABCD and trilactone hydrolase genes involved in the uptake of siderophores, iron transporter and exporter are present. Molecular modelling and docking of FeuA (protein peptidoglycan siderophore-binding protein) and siderophores ferrienterobactine [Fe+3 (ENT)]-3 and ferribacillibactine [Fe+3 (BB)]-3 ligand revealed that [Fe+3 (ENT)]-3 binds to Phe122, Lys127, Ile100, Gln314, Arg215, Arg217, and Gln252. Almost the same for [Fe+3 (ENT)]-3 in addition to Cys222 and Tyr229, but not Ile100.To the best of our knowledge, this is the first report on the characterization of EPS and the adsorption of heavy metals by Psychrobacillus species. The heavy metal removal capabilities may be advantageous for using these organisms in metal remediation.

Nymphaea alba leaf powder effectiveness in removing nisin from fermentation broth using docking and experimental analysis.

The accumulation of nisin in the fermentation medium can reduce the process's productivity. This research studied the potential of Nymphaea alba leaf powder (NALP) as a hydrophobic biosorbent for efficient in-situ nisin adsorption from the fermentation medium by docking and experimental analysis. Molecular docking analysis showed that di-galloyl ellagic acid, a phytochemical compound found in N. alba, had the highest affinity towards nisin. Enhancements in nisin adsorption were seen following pre-treatment of NAPL with HCl and MgCl2. A logistic growth model was employed to evaluate the growth dynamics of the biosorption capacity, offering valuable insights for process scalability. Furthermore, optimization through Response Surface Methodology elucidated optimal nisin desorption conditions by Liebig's law of the minimum, which posits that the scarcest resource governs production efficiency. Fourier Transform Infrared (FTIR) spectroscopy pinpointed vital functional groups involved in biosorption. Scanning electron microscopy revealed the changing physical characteristics of the biosorbent after exposure to nisin. The findings designate NALP as a feasible adsorbent for nisin removal from the fermentation broth, thus facilitating its application in the purification of other biotechnological products based on growth and production optimization principles.

Utilisation of acid-tolerant bacteria for base metal recovery under strongly acidic conditions.

Hydrometallurgical bioprocesses for base metal recovery in environmentally friendly electronic device waste (e-waste) recycling are typically studied under neutral pH conditions to avoid competition between metals and hydrogen ions. However, metal leachate is generally strongly acidic, thus necessitating a neutralisation process in the application of these bioprocesses to e-waste recycling. To solve this pH disparity, we focused on acid-tolerant bacteria for metal recovery under strongly acidic conditions. Four acid-tolerant bacterial strains were isolated from neutral pH environments to recover base metals from simulated waste metal leachate (pH 1.5, containing 100 or 1000 mg L-1 of Co, Cu, Li, Mn, and Ni) without neutralisation. The laboratory setting for sequential metal recovery was established using these strains and a reported metal-adsorbing bacterium, Micrococcus luteus JCM1464. The metal species were successfully recovered from 100 mg L-1 metal mixtures at the following rates: Co (8.95%), Cu (21.23%), Li (5.49%), Mn (13.18%), and Ni (9.91%). From 1000 mg L-1 metal mixtures, Co (7.23%), Cu (6.82%), Li (5.85%), Mn (7.64%), and Ni (7.52%) were recovered. These results indicated the amenability of acid-tolerant bacteria to environmentally friendly base metal recycling, contributing to the development of novel industrial application of the beneficial but unutilised bioresource comprising acid-tolerant bacteria.

Perspectives on nanomaterial-empowered bioremediation of heavy metals by photosynthetic microorganisms.

Environmental remediation of heavy metals (HMs) is a crucial aspect of sustainable development, safeguarding natural resources, biodiversity, and the delicate balance of ecosystems, all of which are critical for sustaining life on our planet. The bioremediation of HMs by unicellular phototrophs harnesses their intrinsic detoxification mechanisms, including biosorption, bioaccumulation, and biotransformation. These processes can be remarkably effective in mitigating HMs, particularly at lower contaminant concentrations, surpassing the efficacy of conventional physicochemical methods and offering greater sustainability and cost-effectiveness. Here, we explore the potential of various engineered nanomaterials to further enhance the capacity and efficiency of HM bioremediation based on photosynthetic microorganisms. The critical assessment of the interactions between nanomaterials and unicellular phototrophs emphasised the ability of tailored nanomaterials to sustain photosynthetic metabolism and the defence system of microorganisms, thereby enhancing their growth, biomass accumulation, and overall bioremediation capacity. Key factors that could shape future research efforts toward sustainable nanobioremediation of HM are discussed, and knowledge gaps in the field have been identified. This study sheds light on the potential of nanobioremediation by unicellular phototrophs as an efficient, scalable, and cost-effective solution for HM removal.

Recent advances in applications of animal biowaste-based activated carbon as biosorbents of water pollutants: a mini-review.

Advances in green engineering and technology have revealed a number of environmentally acceptable alternatives for water purification. In line with this, recent advances in biosorption of pollutants from aqueous solutions using animal biowaste-based activated carbon (AC) are reported herein. Apart from the fish scale-derived AC which is extensively documented, animal bones, among the rest others, have been studied most widely, followed by hair and feathers. Out of the various target water pollutants, removal of heavy metals has been mostly studied. Majority of the reports showed the Freundlich isotherm and pseudo second order as the best fit. Few investigations on the thermodynamics of the adsorption studies and reports on the Gibbs free energy change (ΔG°), enthalpy change (ΔH°), and entropy change (ΔS°) have also been discussed in this report. It has been concluded that while plant-based AC has gained wide interest, the same is not true for the animal-based counterpart albeit the latter's potential for high sorption efficiency as seen in the present report.

Insights into the environmental benefits of using apple pomace for biosorption of lead from contaminated water.

The apple processing industry generates large quantities of organic waste, presenting a major source of organic contamination. Consequently, finding an effective solution for valorizing this waste has become a pressing issue. This study aims to address two key concerns: (i) solving an agricultural problem by efficiently using agri-food residue, and (ii) removing lead, an extremely toxic element, from contaminated waters to mitigate environmental pollution. Two biosorbents were tested: raw apple waste (RA), obtained from a mixture of apple varieties, and the same material after extracting valuable bioactive and reusable components, extracted apple (EA). The study evaluated the influence of pH, initial biosorbent mass, adsorption kinetics, and equilibrium isotherms. The results are very promising, showing a lead removal efficiency of 82 % for RA and 100 % for EA at a low initial concentration of the solution of 20 mg Pb2⁺/L and an optimal pH of 5 ± 0.5. The Langmuir model predicted a maximum adsorption capacity of 44.6 mg/g for RA and 48.6 mg/g for EA. These findings demonstrate that apple waste, even after selective extraction of valuable bioactive components, can be effectively used for environmental remediation on a practical scale.

Biosorption Ability of Pharmaceutically Active Compounds by Anabaena sp. and Chroococcidiopsis thermalis.

Drug overuse harms the biosphere, leading to disturbances in ecosystems' functioning. Consequently, more and more actions are being taken to minimise the harmful impact of xenopharmaceuticals on the environment. One of the innovative solutions is using biosorbents-natural materials such as cells or biopolymers-to remove environmental pollutants; however, this focuses mainly on the removal of metal ions and colourants. Therefore, this study investigated the biosorption ability of selected pharmaceuticals-paracetamol, diclofenac, and ibuprofen-by the biomass of the cyanobacteria Anabaena sp. and Chroococcidiopsis thermalis, using the LC-MS/MS technique. The viability of the cyanobacteria was assessed by determining photosynthetic pigments in cells using a UV-VIS spectrophotometer. The results indicate that both tested species can be effective biosorbents for paracetamol and diclofenac. At the same time, the tested compounds did not have a toxic effect on the tested cyanobacterial species and, in some cases, stimulated their cell growth. Furthermore, the Anabaena sp. can effectively biotransform DCF into its dimer.

Enhanced retention of hydrophobic pesticides in subsurface soils using organic amendments.

The rapid global population growth since the early 2000s has significantly increased the demand for agricultural products, leading to widespread pesticide use, particularly organophosphorus pesticides (OPPs). This extensive application poses severe environmental risks by contaminating air, soil, and water resources. To protect groundwater quality, it is crucial to understand the transport and fate of these pesticides in soil and sediment. This study investigates the effects of hydrochars and biochars derived from sugar beet shreds (SBS) and Miscanthus×giganteus (MIS) on the retardation and biodegradation of OPPs in alluvial Danube sandy soil. The research is novel in its approach, isolating native OPP-degrading bacteria from natural alluvial sandy soil, inoculating them onto chars, and reapplying these bioaugmented chars to the same soil to enhance biodegradation and reduce pesticide leaching. The amendment of chars with immobilized Bacillus megaterium BD5 significantly increased bacterial abundance and activity. Metabarcoding of the 16S rRNA gene revealed a dominance of Proteobacteria (48.0-84.8 %) and Firmicutes (8.3-35.6 %). Transport modeling showed retardation coefficients (Rd) for OPPs ranging from 10 to 350, with biodegradation rates varying between 0.05 % and 75 %, indicating a positive correlation between retardation and biodegradation. The detection of biodegradation byproducts, including derivatives of phosphin, pyridine, and pyrazole, in the column leachate confirmed that biodegradation had occurred. Additionally, principal component analysis (PCA) revealed positive correlations among retardation, biodegradation, specific surface area (SSA), aldehyde/ketone groups, and bacterial count. These findings demonstrate the potential of biochar and hydrochar amendments to enhance OPP immobilization in contaminated soils, thereby reducing their leaching into groundwater. This study offers a comprehensive approach to the remediation of pesticide-contaminated soils, advancing both our fundamental understanding and the practical applications of environmental remediation techniques.

Biosorption of thorium onto Chlorella Vulgaris microalgae in aqueous media.

Thorium biosorption by a green microalga, Chlorella Vulgaris, was studied in a stirred batch reactor to investigate the effect of initial solution pH, metal ion concentration, biomass dosage, contact time, kinetics, equilibrium and thermodynamics of uptake. The green microalgae showed the highest Th adsorption capacity at 45 °C for the solution with a thorium concentration of 350 mg L-1 and initial pH of 4. The amount of uptake raised from 84 to 104 mg g-1 as the temperature increased from 15 to 45 °C for an initial metal concentration of 75 mg L-1 at pH 4. Transformation Infrared Spectroscopy (FTIR) was employed to characterize the vibrational frequency changes for peaks related to surface functional groups. Also, the scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDX) were used to determine the morphological changes and elemental analysis of the biosorbent before and after the sorption process. The Langmuir isotherm was in perfect agreement with the equilibrium empirical data of thorium biosorption and the highest sorption capacity of the Chlorella Vulgaris microalgae was determined as 185.19 mg g-1. Also, the results of kinetic studies show that the thorium biosorption process follows a pseudo-second-order kinetic model. The negative value of ΔG0 indicates spontaneity and the positive values of ΔH0 indicate the endothermic nature of the adsorption process.

Microalgae-fungal pellets as novel dual-bioadsorbents for dye and their practical applications in bioremediation of palm oil mill effluent.

Microalgae-fungal pellets were applied as novel dual-biosorbents for dye removal compared to fungal pellets. Both pellet types effectively removed anionic dyes better than cationic dyes, with the maximum adsorbing efficiency being nearly 100 % at a wide pH range of 3-8. The adsorption isotherms of anionic Congo Red dye and Coomassie brilliant blue R-250 dye using both pellet types and their biosorption kinetics were intensively studied. Noteworthy, the maximum adsorption capacity and affinity of microalgae-fungal pellets were much higher than those of fungal pellets. Both fungal pellets were also applied in the bioremediation of palm oil mill effluent (POME). The repeated treatment of POME by replacing pellets every 12 h enhanced the percent removal of color, phenolic compounds, and COD up to 90.97 ± 0.36 %, 70.71 ± 0.90 % and 56.55 ± 1.98 %, respectively. This study has demonstrated the promising potential for addressing dye removal and bioremediation of colored-industrial effluent in a sustainable and economically viable manner.

Halotolerant Endophytic Bacteria Priestia flexa 7BS3110 with Hg2+ Tolerance Isolated from Avicennia germinans in a Caribbean Mangrove from Colombia.

The mangrove ecosystems of the Department of Atlántico (Colombian Caribbean) are seriously threatened by problems of hypersalinization and contamination, especially by heavy metals from the Magdalena River. The mangrove plants have developed various mechanisms to adapt to these stressful conditions, as well as the associated microbial populations that favor their growth. In the present work, the tolerance and detoxification capacity to heavy metals, especially to mercury, of a halotolerant endophytic bacterium isolated from the species Avicennia germinans located in the Balboa Swamp in the Department of Atlántico was characterized. Diverse microorganisms were isolated from superficially sterilized A. germinans leaves. Tolerance to NaCl was evaluated for each of the obtained isolates, and the most resistant was selected to assess its tolerance to Pb2+, Cu2+, Hg2+, Cr3+, Co2+, Ni2+, Zn2+, and Cd2+, many of which have been detected in high concentrations in the area of study. According to the ANI and AAI percentages, the most halotolerant strain was identified as Priestia flexa, named P. flexa 7BS3110, which was able to tolerate up to 12.5% (w/v) NaCl and presented a minimum inhibitory concentrations (MICs) of 0.25 mM for Hg, 10 mM for Pb, and 15 mM for Cr3+. The annotation of the P. flexa 7BS3110 genome revealed the presence of protein sequences associated with exopolysaccharide (EPS) production, thiol biosynthesis, specific proteins for chrome efflux, non-specific proteins for lead efflux, and processes associated with sulfur and iron homeostasis. Scanning electron microscopy (SEM) analysis showed morphological cellular changes and the transmission electron microscopy (TEM) showed an electrodense extracellular layer when exposed to 0.25 mM Hg2+. Due to the high tolerance of P. flexa 7BS3110 to Hg2+ and NaCl, its ability to grow when exposed to both stressors was tested, and it was able to thrive in the presence of 5% (w/v) NaCl and 0.25 mM of Hg2+. In addition, it was able to remove 98% of Hg2+ from the medium when exposed to a concentration of 14 mg/L of this metalloid. P. flexa 7BS3110 has the potential to bioremediate Hg2+ halophilic contaminated ecosystems.

Biosorption of Cu2+ on magnetic calcium alginate immobilized Phanerochaete chrysosporium.

Phanerochaete chrysosporium were immobilized in magnetic Fe3O4 nanoparticles and calcium alginate to form MC microspheres. The obtained MC microsphere was characterized by SEM, EDS, XRD, BET, VSM and TGA. The results indicated that MC microsphere was a three-dimensional structure with relatively large specific surface area and good porosity. MC microspheres had excellent magnetic recovery performance and thermal stability. The characteristics and performance of MC microspheres on adsorption of Cu2+ were evaluated based on batch adsorption experiments. The maximum adsorption capacity of Cu2+ by MC microspheres was 35.07 mg g-1 at pH of 5.0, temperature of 35 °C and adsorption time of 8 h. MC microspheres can still effectively adsorb Cu2+ at 400 mg L-1. Integrating simulation results from pseudo-second-order kinetic model, Intra-particle diffusion model and Freundlich model, the process was mainly dominated by chemical adsorption, and it is a multi-molecular layer adsorption. The results of XPS and FTIR showed that complexation, ion replacement, and reduction are important mechanisms for adsorption of Cu2+ on MC microspheres. -OH and C-O/C=O mainly complexes with Cu2+ in the biosorption process. After five adsorption-desorption cycles, the adsorption efficiency can still reach 32.40 %. Therefore, MC microspheres are a potential adsorbent that can achieve effective recovery.

Optimization and mechanism studies for the biosorption of rare earth ions by Yarrowia lipolytica.

Research on the recovery of rare earth elements from wastewater has attracted increasing attention. Compared with other methods, biosorption is a simple, efficient, and environmentally friendly method for rare earth wastewater treatment, which has greater prospects for development. The objective of this study was to investigate the biosorption behavior and mechanism of Yarrowia lipolytica for five rare earth ions (La3⁺, Nd3⁺, Er3⁺, Y3⁺, and Sm3⁺) with a particular focus on biosorption behavior, biosorption kinetics, and biosorption isotherm. It was demonstrated that the biosorption capacity of Y. lipolytica at optimal conditions was 76.80 mg/g. It was discovered that the biosorption process complied with the pseudo-second-order kinetic model and the Langmuir biosorption isotherm, indicating that Y. lipolytica employed a monolayer chemical biosorption process to biosorb rare earth ions. Characterization analysis demonstrated that the primary functional groups involved in rare earth ion biosorption were amino, carboxyl, and hydroxyl groups. The cooperative biosorption of rare earth ions by Y. lipolytica was facilitated by means of surface complexation, ion exchange, and electrostatic interactions. These findings suggest that Y. lipolytica has the potential to be an effective biosorbent for the removal of rare earth elements from wastewater.

Sustainable heavy metal (Cr(VI) ion) remediation: Ternary blend approach with chitosan, carboxymethyl cellulose, and bioactive glass.

Heavy metal pollution poses a significant environmental challenge to worldwide, especially in developing countries. This study focuses on eliminating the heavy metal chromium (VI) ion from wastewater, employing an eco-friendly and economical ternary blend composed of Chitosan (CS), Carboxymethyl cellulose (CMC), and bioactive glass (BAG). The innovative bioactive glass is crafted from biosilica extracted from biowaste of cow dung ash, calcium oxide from eggshell ash, and phosphorus pentoxide. The CS/CMC/BAG blend is prepared via sol-gel method and characterized using XRD, FT-IR, TGA, BET, TEM and SEM revealing a porous structural morphology during blending. Batch adsorption studies explore various parameters such as pH, adsorbent dose, contact time and initial metal ion concentrations. The results are then evaluated through adsorption kinetics and adsorption isotherms (Langmuir, Freundlich, D-R, and Temkin isotherm modeling). The investigation concludes that the optimal conditions for Cr (VI) removal are pH 3, contact time of 300 min, adsorbent dosage of 0.5 g, and an initial metal ion concentration of 50 ppm. The adsorption isotherm model indicates an excellent fit with the Freundlich isotherm (R2 = 0.9576) and pseudo-second-order kinetics (R2 = 0.981). In summary, the CS/CMC/BAG ternary blend exhibits a remarkable ability to effectively remove heavy metal Cr(VI) ions from industrial wastewater.

Biosorption of Histamine by Lactic Acid Bacteria for Detoxification.

Histamine accumulates in fish and fish products such as tuna, mackerel, skipjack, and bonito by work microorganisms. And it causes allergy reactions like IgE-mediated ones. Lactic acid bacteria (LAB) are known as one of the probiotic bacteria that indicate various health functionalities for humans. And some previous studies report that LAB can adsorb and excrete various toxic molecules. Here, this chapter introduces the methods to quantify the histamine-binding ability of LAB.

Biosorption of Heavy Metals by Lactic Acid Bacteria for Detoxification.

The gradual accumulation of heavy metals can have detrimental effects on health. Lactic acid bacteria (LAB) are common microbes used as probiotics; various LAB strains are consumed in food products, especially in fermented foods. Many studies have suggested that LAB with high affinity to harmful heavy metals can be used as efficient detoxification tools. Accordingly, it is important to test the biosorption of various heavy metals, e.g., cadmium, lead, arsenic, and mercury, by LAB. Here, I describe protocols to quantify the binding ability of LAB and to identify their heavy metal-binding proteins.