A comparison of surgical scar treatment using various combinations of autologous fat, hyaluronic acid and resurfacing with the 1540 nm non-ablative Erbium laser - a prospective pilot study.

Scars can cause aesthetic or functional disturbance. Several interventions had been described to improve their appearance. We propose that the combination of some of those treatments can synergize their effects on the scar. We designed a prospective pilot study with ten patients using the patient as their own control to compare different interventions. In each patient, the scar was divided into four parts treated differently: 1. No treatment (control), 2. Fat grafting only, 3. Fat grafting and Hyaluronic Acid (HA), 4. Fat grafting, HA and with a non-fractional laser. Each part of the scar was evaluated by the Patient and Observer Scar Assessment Scale (POSAS). Treatment of the scar with the combination of the three modalities showed better results in the observer scale. In addition, a combination of fat injection, HA, and subsequent skin resurfacing with non-ablative laser showed better outcomes for all parameters on the Observer Scale except vascularity, while on the Patient Scale thickness, relief, pliability, surface area, and overall measurement were better. The combination of all three treatments tends to improve scarring results and appears to be safe and effective. However, further studies with larger samples are needed to explore the potential use of this combined treatment.

The Treatment Selection for a 36-Year-Old Woman With Stress Urinary Incontinence Using a Discrete Mathematical Approach: A Case Report.

This case report describes the treatment selection process for a 36-year-old woman with stress urinary incontinence (SUI) and an overactive bladder (OAB) who desired pregnancy. The patient had comorbidities of hypertension and type 2 diabetes, which required consideration to improve her quality of life and reproductive health. A recently developed decision support tool using a discrete mathematical approach was used to select a treatment method tailored to the patient's individual situation. The analysis determined that vaginal erbium laser (VEL) treatment (Renovalase SP Dynamis Fotona d.o.o, Ljubljana, Slovenia) was the most suitable for this patient. VEL treatment significantly improved both SUI and OAB and changing antihypertensive medication eliminated nocturia. This case suggests the potential application of graph theory in treatment selection for SUI patients.

Effect of Er,Cr: YSGG laser debonding treatment on the optical properties and surface roughness of ceramic laminate veneers: An in vitro study.

PURPOSE: The objective of this study was to evaluate the effect of (Er,Cr: YSGG) laser debonding treatment on optical properties and surface roughness of veneers made of different ceramic materials. MATERIALS AND METHODS: Thirty bovine incisors were prepared to receive laminate veneers and divided into three groups (n = 10) according to ceramic material where group (E): IPS e.max CAD, group (S): Vita Suprinity, and group (C): Celtra Duo. Blocks were sectioned into 0.5 mm thickness plates and cemented on the labial surface of incisors using resin cement. The Er,Cr: YSGG laser was applied to each specimen at 4.5 W and 25 Hz for group E and at 6 W and 25 Hz for groups S and C. Color change (△E00), translucency parameter (TP) and surface roughness in µm (Ra) values were measured and calculated before and after laser treatment. Data were analyzed using two-way mixed model ANOVA at a significance level of p < 0.05. RESULTS: The highest mean △E00 value was recorded in group E (1.35 ± 0.09) followed by group S (1.08 ± 0.16) and then group C (0.93 ± 0.10) with a significant difference between them (p < 0.001). All groups exceeded the perceptibility threshold but remained below the acceptability threshold. No statistically significant difference was found in TP except for group E (p = 0.019). Ra values after laser debonding showed significantly higher values than before laser treatment in all three groups (p < 0.001). CONCLUSION: Er,Cr: YSGG laser can be safely used for debonding ceramic veneers without altering the optical properties but it does increase the roughness of debonded ceramic restorations.

Effect of ultrasonic and Er,Cr:YSGG laser-activated irrigation protocol on dual-species root canal biofilm removal: An in vitro study.

Aim: The aim of the study was to investigate the disinfecting efficacy of a standardized irrigating solution activated by ultrasonics or laser irradiation on mature dual-species biofilms at different root levels in vitro. Materials and Methods: Conventional access cavity preparations were done on 160 single-rooted mandibular premolar teeth with single canals. Freshly extracted oral microbial strains of Staphylococcus aureus, Streptococcus mutans, Enterococcus faecalis, and Candida albicans after biochemical confirmation were used to generate two discrete dual-species microbial inoculums. The sterilized tooth samples were randomly segregated into two groups (n = 80) and inoculated with a mixed inoculum of S. aureus + E. faecalis strains (Group 1) and S. mutans + C. albicans strains (Group 2), respectively. Following the 21-day incubation period under aerobic conditions, the infected specimens in each group were divided into four subgroups (n = 20) and subjected to experimental treatment protocols. This included a positive control (no treatment of biofilms), syringe irrigation alone with TruNatomy needle, passive ultrasonically activated irrigation with 20# Irrisafe tip, and laser agitation of irrigant with Er,Cr:YSGG laser using RFT 2 laser tip. Root canals of experimental specimens (except the control samples) are instrumented with TruNatomy rotary file system using 1:1 mixture of 3% NaOCl and 18% etidronic acid as irrigants. The quantitative assessment of reduction in viable biofilm microbes after treatment was done using colony-forming unit counts and confocal laser scanning microscopy image analysis. The obtained data were analyzed statistically with a significant level set at 0.05. Results: Laser-assisted irrigation has shown a considerably higher mean percentage reduction of microbes compared to ultrasonic agitation and the syringe irrigation showed the least microbial reduction (P = 0.001). No significant difference was noted between the three root regions of ultrasonic and laser groups (P > 0.05), whereas in the syringe groups, apical portions showed higher microbial counts compared to cervical and mid-root regions (P = 0.001). Conclusion: Erbium laser-assisted irrigation has performed superior to ultrasonic agitation against both the experimental dual-species biofilms, while the syringe irrigation showed the least microbial reduction specifically at apical root portions.

The Influence of Erbium Laser Pretreatment on Dentin Shear Bond Strength and Bond Failure Modes: A Systematic Review and Network Meta-Analysis.

PURPOSE: To systematically review in-vitro studies that evaluated the influence of erbium laser pretreatment on dentin shear bond strength (SBS) and bond failure modes. MATERIALS AND METHODS: Electronic databases (PubMed, Cochrane Central, Embase, and Web of Science) were searched. Only in-vitro studies involving erbium laser irradiation of the dentin surface and SBS testing of the bonded resin block were included. The three common modes of bond failure (1. adhesive, 2. cohesive, and 3. mixed) were observed and analyzed. The network meta-analysis (NMA) was performed by Stata 15.0 software, the risk of bias was evaluated, and the certainty of the evidence was assessed by the Confidence in Network Meta-analysis (CINeMA). RESULTS: Forty studies with nine pretreatments (1. blank group: BL; 2. phosphoric acid etch-and-rinse: ER; 3. self-etch adhesive: SE; 4. Er:YAG laser: EL; 5. Er,Cr:YSGG laser: ECL; 6. ER+EL; 7. ER+ECL; 8. SE+EL; 9. SE+ECL) were included in this analysis. The NMA of SBS showed that ER+EL [SMD = 0.32, 95% CI (0.11, 0.98)] had the highest SBS next to ER, especially when using one of the 3M ESPE adhesives, followed by EL, ECL, SE and SE+EL. The Ivoclar Vivadent adhesives significantly increased the SBS of the ECL [SMD = 0.37, 95% CI (0.16,0.90)] and was higher than ER+EL [SMD = 0.25,95% CI (0.07,0.85)]. Finally, the surface under the cumulative ranking curve (SUCRA) value indicated that ER+EL (SUCRA = 71.0%) and EL (SUCRA = 62.9%) were the best treatments for enhancing dentin SBS besides ER. ER+EL (SUCRA = 85.3%), ER (SUCRA = 83.7%) and ER (SUCRA = 84.3%) had the highest probability of occurring in adhesive, cohesive and mixed failure modes, respectively. CONCLUSION: Er:YAG and Er,Cr:YSGG lasers improved dentin SBS compared to the blank group, especially when the acid etch-and-rinse pretreatment was combined with Er:YAG laser. Shear bond strength and failure mode do not appear to be directly related.

Safety and Efficacy of the Erbium Laser in Debonding Dental Accessories: A Narrative Review.

Objective: This article aims to review the safety and efficacy of the Er:YAG laser in debonding dental accessories. Methods: This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Articles published between 2010 and 2022 on the removal of dental accessories using erbium laser were searched. The selected articles were then classified according to the accessories used: adhesives, brackets, restorations, or implant crowns. Enamel surface roughness, shear bond strength, adhesive remnant index, duration time (t), pulp chamber temperature (T), morphology (M), and other variables were then noted. Results: The dental accessories and adhesives used were described along with the laser parameters used, such as frequency, pulse width, irradiation time, scanning mode, water-air cooling, and other variables. Conclusions: Laser removal using Er:YAG laser of dental accessories such as brackets, crowns, and veneers is fundamentally safe, time-saving, and does not cause damage to the enamel nor the underlying dentin. However, there was no distinct advantage with laser removal seen, such as those residual adhesives of brackets on the tooth surface and temporary adhesives of restorations.

Study on the effect of crystal changes on acid resistance of erbium laser etched enamel surface.

To investigate the mechanism underlying high acid resistance of enamel after erbium laser etching. Forty-five premolars were collected and assigned to three groups. A 4×4×1 mm enamel sample was prepared, the left side was the control side, the right side was the treated side, which was treated with different surface treatments, including 35% phosphoric acid etching, Er:YAG laser etching, and Er,Cr:YSGG laser etching. The hydroxyapatite crystal size on the enamel surface of the samples was observed. The contents of Ca, P, O, F, Cl, C, Mg were detected. The crystallinity of the hydroxyapatite crystal was analyzed. After erbium laser etching, the enamel surface had high hydroxyapatite crystal size, beneficial content of chemical elements and crystallinity. The morphological and composition changes of crystals in the enamel surface after erbium laser etching may be one of the crucial mechanisms underlying the enhancement of acid resistance of enamel after erbium laser etching.

Láser erbium vaginal como tratamiento del síndrome genitourinario de la menopausia: resultados preliminares / Erbium vaginal laser as a treatment for genitourinary syndrome of menopause: preliminary results

ANTECEDENTES: El síndrome genitourinario de la menopausia (SGM) afecta hasta el 50% de las mujeres posmenopáusicas. Sus síntomas presentan un curso crónico y progresivo, pudiendo alterar significativamente la sexualidad y la calidad de vida. OBJETIVO: Evaluar efectividad a corto plazo y aceptabilidad del láser vaginal de Erbium en cristal de itrio-aluminio-granate (Er:YAG) como una terapia fototérmica no invasiva, no ablativa para el manejo del SGM. MÉTODO: Estudio longitudinal prospectivo, realizado en 28 mujeres posmenopáusicas con SGM. Se aplica láser vaginal Er:YAG en 3 sesiones cada 30 días. En todos los controles, se evalúa sequedad vaginal, dispareunia mediante escala visual analógica, y se registra el "vaginal health index score" (VHIS). Al final del tratamiento se evalúa la aceptabilidad del método. RESULTADOS: Se observa mejoría significativa de los síntomas (sequedad vaginal y dispareunia; p<0,01) durante todo el periodo de estudio y del VHIS (8,2 ± 1,3 previo al tratamiento vs. 19,2 ± 0,4 posterior al tratamiento; p<0,01). El 93,4% de las pacientes calificó el procedimiento como excelente o bueno. CONCLUSIÓN: Nuestro estudio piloto muestra que el tratamiento con láser Er:YAG en mujeres posmenopáusicas con síntomas de SGM es eficaz, factible y seguro en el corto plazo. Se requieren datos a más largo plazo y de mayor tamaño muestral para confirmar nuestros resultados.

BACKGROUND: The genitourinary syndrome of menopause (GSM) affects up to 50% of postmenopausal women. Symptoms are chronic and likely worsen over time. This complains may interfere with sexual function and quality of life. OBJECTIVE: To evaluate the short-term effectiveness and acceptability of Erbium in yttrium aluminum-garnet crystal Laser (Er:YAG) as a non-invasive, non-ablative photothermal therapy for the treatment of GSM. METHODS: Prospective longitudinal study performed in 28 postmenopausal women suffering from GSM. All participants were treated intravaginally with Er:YAG laser in 3 applications performed every 30 days. Symptoms (vaginal dryness and dyspareunia) were evaluated by a visual-analogic scale (VAS) and the vaginal health index score (VHIS). After therapy, the women were asked to evaluate the acceptability of the intervention. RESULTS: Er:YAG laser treatment was effective to improve symptoms (vaginal dryness and dyspareunia; p<0.01) at all the study period, as well the VHIS (8.2 ± 1.3 at baseline vs. 19.2 ± 0.4 after treatment; p<0.01). Satisfaction with the procedure was reported as excellent or good by 93.4% of women. CONCLUSION: Our pilot study shows that the Er:YAG treatment in postmenopausal women with GSM is effective, feasible, and safe. Further larger, long-term and controlled studies are required to confirm this data.

Efeito do preparo cavitário com laser de Er:YAG e materiais que liberam flúor na prevenção de lesões de cárie / Effect of cavity preparation with Er:YAG laser and fluoride releasing materials on the prevention of caries lesion

O objetivo desse estudo foi avaliar a influência da técnica de preparo cavitário e de materiais restauradores contendo flúor na prevenção da secundária. Dentes humanos foram seccionados em 72 blocos e distribuídos em dois grupos. Cavidades com 1,6 mm de diâmetro foram preparadas com pontas diamantadas ou laser de Er:YAG laser (6 Hz, 300 mJ, 47 J.cm elevado a 2). Cada grupo foi dividido em três subgrupos e restaurados com cimento de ionômero de vidro, ionômero de vidro modificado por resina ou uma resina composta. Os espécimes foram termociclados e submetidos a ciclagem de pH. As lesões de cárie artificial foram ranqueadas utilizando uma escala ordinal por inspeção visual. Os testes de Kruskal-Wallis e Dunn (α = 0,05) não demonstraram diferenças no desenvolvimento de lesões entre as cavidades resturadas com o mesmo material e preparadas com pontas diamantadas ou laser de Er:YAG laser. O laser de Er:YAG utilizado para o preparo cavitário com 6 Hz, 300 mJ, 47 J.cm elevado a 2 não demonstrou a habilidade de garantir maior ácido resistência aos preparo.

The objective of this study was to evaluate the influence of the cavity preparation technique and fluoride-containing restorative materials on the prevention of the secondary caries. Human teeth were sectioned into 72 blocks and distributed into 2 groups. Cavities measuring 1.6 mm were performed with diamond burs or Er:YAG laser (6 Hz, 300 mJ, 47 J.cm to the -2 power). Each group was divided into 3 sub-groups, and restored with a glass-ionomer cement, resinmodified glass-ionomer, or composite resin. The specimens were thermal cycled and submitted to pH cycling. Artificial caries were scored using an ordinal scale based on visual inspection. Kruskal-Wallis and Dunn test ((α = 0,05) showed no differences in the caries lesion development between the cavities restored with the same material and prepared with diamond burs or Er:YAG laser. The Er:YAG laser used for cavity preparation used with 6 Hz, 300 mJ, 47 J.cm to the -2 power did not show the ability to guarantee significantly more acid-resistance against acid challenge.

Tratamento da hipercromia cutânea idiopática da região orbital com Erbium Laser: uma avaliação retrospectiva / Treatment of idiopathic cutaneous hyperchromia of the orbital region (ICHOR) with Erbium Laser: a retrospective assessment

Introdução: a hipercromia cutânea idiopática da região orbital dá um aspecto cansado à face. Sua etiologia ainda não é bem entendida. Causas primárias incluem hiperpigmentação da derme, por depósitos de melanina, ou pela vascularização superficial visível através da pele palpebral inferior. Causas secundárias são associadas com doenças sistêmicas e autoimunes. As opções de tratamento são muito vastas, com o laser sendo relativamente recente. Objetivos: o objetivodesteestudo é avaliar os resultados, a longo prazo, com o uso do Er:YAG(erbium) laser, nadiminuiçãodahiperpigmentação periorbital. Métodos: dez pacientes, incluindo oito mulheres e dois homens, foram submetidos ao tratamento da região periorbital usando Erbum:YAG laser, entre 2003 e 2006. Os pacientes foram avaliados comA e B períodos após o procedimento. Os critérios de avaliação incluíram a redução da pigmentação periorbital e a satisfação do paciente. Resultados: o tratamento com Er:YAG laser mostrou redução da hipercromia periorbital efetiva, com significativa melhora precoce e tardia, além da manutenção dos resultados, durante o período de avaliação, com satisfação dos pacientes. Discussão: a ablação com o Er:YAG laser mostrou-se efetiva na redução da hipercromia idiopática periorbital, com resultados duradouros. Complicações menores e raras incluíram hiperpigmentação transitória, pigmentação residual e leve hipocromia, em alguns casos.

Introduction: idiopathic Cutaneous Hypercromia of the Orbital Region (HCIRO),give a sad, tired aspect to face. Its etiopathology is to date still not well understood. Primary causes include hyperpigmentation from dermal deposits of melanin, or from superficial vascularization that is visible through the lower palpebral skin. Secondary causes are associated with systemic and autoimmune disorders. Treatment for HCIRO varies greatly, with laser treatment being relatively recent. Objectives: theobjective of this study was to clinically evaluate the long-term results of treatment using the Er:YAG (erbium)laser to diminish idiopathic periorbital hyperpigmentation. Methods: ten patients, eight females and two males underwent treatment of the periorbital region using ablative Erbium: YAG laser treatment between 2003 and 2006. The patients were evaluated at 2 and 6 month and 2-5 years post-procedure. The evaluation criteria included clinical reduction of periorbital pigmentation and patient satisfaction. Results: the treatment with Er:YAG laser, reduction of idiopathic periorbital hyperchromia was effective at early and long-term evaluation points, with the results being maintained during the period of evaluation with good patient satisfaction. Discussion: ablative treatment with Er:YAG laser was found to be effective in reduction of idiopathic periorbital hyperchromia, with a long-lasting result. Complications were minorandrare, and included mild hyperpigmentation, residual pigment, and hipopigmentation.