Charged functional groups modified porous spherical hollow carbon material as CDI electrode for salty water desalination.

As a new electrochemical technology, capacitive deionization (CDI) has been increasingly applied in environmental water treatment and seawater desalination. In this study, functional groups modified porous hollow carbon (HC) were synthesized as CDI electrode material for removing Na+ and Cl- in salty water. Results showed that the average diameter of HC was approximately 180 nm, and the infrared spectrum showed that its surface was successfully modified with sulfonic and amino groups, respectively. The sulfonic acid functionalized HC (HC-S) showed better electrochemical and desalting performance than the amino-functionalized HC (HCN), with a maximum Faradic capacity of 287.4 F/g and an adsorptive capacity of 112.97 mg/g for NaCl. Additionally, 92.63% capacity retention after 100 adsorption/desorption cycles demonstrates the excellent stability of HC-S. The main findings prove that HC-S is viable as an electrode material for desalination by high-performance CDI applications.

Investigation on nanostructure, surface functional groups, and oxidation activity of particulate along the exhaust after-treatment of a diesel engine fueled with waste cooking oil biodiesel blends.

In this study, the nanostructure, surface functional groups, and oxidation activity of soot particulate along the exhaust after-treatment system of a heavy-duty diesel engine fueled with waste cooking oil (WCO) biodiesel blends are investigated by TEM, XPS, and TGA respectively. The main findings are as follows: Along the exhaust after-treatment system, fringe length of primary particles of soot particulate emitted from tested heavy-duty diesel engine fueled with B0, B10, B20, and B100, i.e., 0%, 10%, 20%, and 100% ratio of WCO biodiesel blended into petroleum diesel in volume respectively increases, while fringe tortuosity and separation distance of primary particles reduces. The fringe length of B10, B20, and B100 is smaller, but the fringe tortuosity and separation distance are larger than that of B0. The O/C ratio of soot particulate tends to increase firstly and then decrease as the exhaust passes through DOC+cDPF and SCR+ASC in sequence. The O/C ratio of B10, B20, and B100 are also higher than that of B0. Soot particulate at cDPF outlet contains carborundum and biuret is found at SCR+ASC outlet. The sp3/sp2 ratio decreases along the exhaust after-treatment system, and B10, B20, and B100 tend to get higher sp3/sp2 ratio than B0. The C-OH and C=O content of soot particulate from different WCO biodiesel blends show generally similar trends along the exhaust after-treatment system, while the activation energy of soot particulate keeps increasing along the exhaust after-treatment system, but decreases with the increasing of blend ratio. These findings can provide useful references for optimizing the after-treatment system for WCO biodiesel blends.

How a constructed wetland within a natural park enhances plankton communities after more than 10 years of operation: changes over space and time.

Constructed wetlands are increasingly used as a solution to treat polluted water in natural environments. Located in the Albufera de València Natural Park, a constructed wetland was built in 2009 as a pilot project to act as an intermediary between low-quality waters and the largest protected coastal lagoon in the Iberian Peninsula. With a unique dataset spanning more than a decade (2009-2023), this study assessed changes in plankton communities both spatially (comparing six sampling sites) and temporally (comparing four periods of years). The results show how the constructed wetland, after nearly 15 years of operation, has not only maintained but also improved its capacity to enhance the biological quality of the water which is released into the protected lagoon, thus fulfilling one of the main aims of its construction. During the last period (2020-2023) of the time series, the constructed wetland outlets had significantly higher zooplankton biomass, particularly filter-feeding cladocerans, compared to the inlets. This clear improvement in the plankton community was due to management interventions (e.g., drying sectors of the constructed wetland during the summers since 2019) and the rise in temperature. These circumstances promoted earlier hatching of cladoceran diapause eggs from the sediments compared to previous years, maintaining their presence throughout all seasons. Consequently, the outlets of the constructed wetland had significantly lower phytoplankton abundance and sestonic chlorophyll-a concentrations than in the past, nearly oligotrophic states, and a reduced biovolume of potentially toxic cyanobacteria in the released waters.

Construction of carbon-doped iron-based nanozyme for efficient adsorption and degradation to synergistic removal of aflatoxin B1.

The multifunctional composites Fe3O4/GO/NH2-MIL-53(Fe) with excellent adsorption-degradation performance was prepared for the removal of Aflatoxin B1 (AFB1). The adsorption function of Fe3O4/GO/NH2-MIL-53(Fe) was based on the large specific surface area and abundant adsorption sites. The degradation function of Fe3O4/GO/NH2-MIL-53(Fe) was based on the activation of H2O2 by the catalytic active center formed by the coordination of metal ions and oxygen-containing groups in the system, resulting in hydroxyl radicals (·OH), superoxide anion radicals (O2-) and singlet oxygen (1O2). The adsorption of nanozyme accelerated the degradation reaction process, and the adsorption site was further exposed as the degradation process progressed. The synergistic effect realized the efficient removal of AFB1. Construction of Fe3O4/GO/NH2-MIL-53(Fe) as the carbon-doped iron-based nanozyme provided novel approaches of the removal for risks control of AFB1. Accompanied by the AFB1 adsorption, the advanced oxidation of nanozyme to the AFB1 degradation provided a promising way for the synergistic removal of AFB1.

Physicochemical properties of starch of four varieties of native potatoes.

The limited industrial use of indigenous varieties of native potatoes has caused a decrease in its cultivation, restricting it to the self-consumption of the Andean population. The present study analyzed the physicochemical, thermal, and structural properties of the starches extracted from four of these varieties Aq'hu Pukucho, Yurakk Kkachun Wakkachi, Yurac Anca, and Huarmi Mallco, as a potential source of be used in industries such as food, pharmaceutical and, bioplastics. The percentage yield in wet extraction ranged between 14.53 and 20.26 %. The luminosity L* and whiteness index (WI) values were observed in ranges of 90.75-92.71 and 90.05-91.50, respectively. The Finding revealed various techno-functional properties, since the level of amylose varied between 36.29 and 43.97 %, an average zeta potential of -22 mV, and a maximum viscosity between 19,450-14,583 cP. The starches showed consistent thermal behavior since the TGA curves showed three stages with gelatinization temperatures that ranged between 54.9 and 59.75 °C, an enthalpy of 3.60-6.62 J/g, and various shapes of particles such as circular, elliptical, and oval. In conclusion, the relationships between variables such as water absorption index, swelling power, viscosity, crystallinity, enthalpy, and gelatinization temperature reveal different characteristics of each type of starch, which can influence its use.

Effects of clean fracturing fluids on coal microstructure and coalbed gas adsorption.

Nowadays, some fracking fluids can enable resourceful extraction of coalbed methane and reduce greenhouse gas emissions. However, their toxicity or corrosiveness will cause harm to downhole workers and pollute groundwater resources. Thus, five kinds of clean composite fracturing fluids were developed in this paper by using starch solution as the matrix and adding various preparations. The change rule of methane adsorption capacity by microstructure changes of coal samples was investigated systematically, and the optimal composite fracturing fluid was determined. The results showed that the new fracturing fluid increased the degree of aromatic ring condensation by 43.3% and the average pore size by 52.1%. Also, the adsorption constants of a value decreased by 11.6% and b value decreased by 23.9%, which can remarkably reduce the methane adsorption. The experimental results provide theoretical support for the clean production of coalbed methane.

High species richness of sheep-grazed sand pastures is driven by disturbance-tolerant and weedy short-lived species.

We selected 15 sheep-grazed sand pastures along a gradient of increasing grazing intensity to study the fine-scale patterns of main biomass fractions (green biomass, litter) and that of plant species and functional groups (life forms and social behaviour types). We classified them into five grazing intensity levels based on stocking density, proximity to drinking and resting places and the number of faeces. We aimed to answer the following questions: (i) How does increasing intensity of sheep grazing affect the amount of green biomass, the species richness and their relationship in sand pastures? (ii) How does increasing intensity of sheep grazing affect the biomass of perennial and short-lived graminoids and forbs? (iii) How does the disturbance value-expressed in the biomass ratio of disturbance-tolerant and ruderal species-change along the gradient of grazing intensity? A unimodal relationship between green biomass and species richness was detected; however, the ordination (canonical correspondence analysis, CCA) showed no clustering of pastures subjected to the same levels of grazing intensity. Along the grazing intensity gradient we found an increasing trend in species richness and significant differences in green biomass (decreasing trend), litter (decreasing trend), graminoids (decreasing trend) and short-lived forbs (increasing trend). We found an increasing amount of disturbance-tolerant and ruderal species with increasing grazing intensity. We suggest that we might need to use multiple scales for sampling and a fine-scale assessment of grazing intensity. Our findings might be instructive for pastures in densely populated regions, which are prone to the encroachment of disturbance-tolerant and ruderal species.

Changes in Soil Aggregate Carbon Components and Responses to Plant Input during Vegetation Restoration in the Loess Plateau, China.

Vegetation restoration is an effective measure to cope with global climate change and promote soil carbon sequestration. However, during vegetation restoration, the turnover and properties of carbon within various aggregates change. The effects of plant source carbon input on surface soil and subsurface soil may be different. Thus, the characteristics of carbon components in aggregates are affected. Therefore, the research object of this study is the Robinia pseudoacacia forest located in 16-47a of the Loess Plateau, and compared with farmland. The change characteristics of organic carbon functional groups in 0-20 cm, 20-40 cm, and 40-60 cm soil layers were analyzed by Fourier near infrared spectroscopy, and the relationship between the chemical structure of organic carbon and the content of organic carbon components in soil aggregates was clarified, and the mechanism affecting the distribution of organic carbon components in soil aggregates was revealed in the process of vegetation restoration. The results show the following: (1) The stability of surface aggregates is sensitive, while that of deep aggregates is weak. Vegetation restoration increased the surface soil organic carbon content by 1.97~3.78 g·kg-1. (2) After vegetation restoration, the relative contents of polysaccharide functional groups in >0.25 mm aggregates were significantly reduced, while the relative contents of aromatic and aliphatic functional groups of organic carbon were significantly increased. The opposite is true for aggregates smaller than 0.25 mm. (3) With the increase in soil depth, the effect of litter on organic carbon gradually decreased, while the effect of root input on the accumulation of inert carbon in deep soil was more lasting.

Forward osmosis membrane with lightweight functionalised multiwall carbon nanotube nanofillers.

Thin-film nanocomposite (TFN) membranes with a polyamide (PA) active layer modified with carbon nanotubes (CNTs) hold promise for water desalination and wastewater reuse via forward osmosis (FO). We hypothesise that modifying the PA active layer with hydroxyl-functionalised multi-wall carbon nanotubes (f-MWCNTs) will enhance the water flux of the FO membrane while maximising salt rejection. TFN membranes were modified using in situ interfacial polymerisation, with varying f-MWCNT mass content to minimise agglomeration. These modified FO membranes are designated as CTFN-x, where x represents the mass content of f-MWCNTs, ranging from 0.001%, CTFN-1 to 0.008%, CTFN-8 (w/v). The surface properties of CTFN-x were characterised using electron microscopy, atomic force microscopy, and molecular spectroscopy. IR spectroscopic data confirm the successful adherence of f-MWCNTs as a bridging agent between the 1,3-phenylenediamine (MPD) and trimesoyl chloride (TMC) polymers, preserving FO membrane integrity. The CTFN-4 FO membrane shows the highest water flux (29 LMH) and the lowest reverse salt flux (2.90 gHM), attributed to preferential water flow channels in the f-MWCNTs. The integration of f-MWCNTs into the active layer improved water flux, reduced reverse salt flux, and enhanced the antifouling properties of FO membranes.

Characterization of EPS subfractions from a mixed culture predominated by partial-denitrification functional bacteria.

Extracellular polymeric substances (EPS) play a crucial role in the aggregation of partial denitrification (PD) consortia, as EPS is closely linked to bioreactor performance. However, the structural and compositional properties of EPS from PD consortia have not yet been investigated. In this study, photometric measurements indicated that PD consortia contained significantly more EPS (168.81 ± 2.10 mg/g VSS) compared to conventional activated sludge (79.79 mg/g VSS). The EPS of PD consortia exhibited a significant predominance of proteins over polysaccharides, with a protein/polysaccharide ratio of 1.43 ± 0.10. FTIR analysis revealed that the EPS of PD consortia contained fewer hydrophilic functional groups, particularly carboxyl and carbonyl groups, indicating a high aggregation potential. The content comparison of EPS and functional groups across three stratified EPS subfractions from PD consortia consistently followed the sequence: TB-EPS > LB-EPS > S-EPS. XPS results corroborated the FTIR findings and the protein/polysaccharide ratio determined by photometric measurements, all of which suggested that the EPS of PD consortia exhibited a higher abundance of hydrophobic functional groups. However, the higher α-helix/(ß-sheet + random coil) ratio (0.99) suggested that the proteins in PD consortia had a compact structure, making inner hydrophobic groups difficult to expose. This compact protein structure could limit aggregation among bacterial cells, indicating the need for process optimization to enhance sludge aggregation in PD-related processes. Overall, understanding the aggregation characteristics of PD consortia could improve the application of PD-based processes.

3,3-Difluorooxetane - A Versatile Functional Group for Bioisosteric Replacements in Drug Discovery.

Functional group (FG) is one of the cornerstone concepts in organic chemistry and related areas. The wide spread of bioisosterism ideas in medicinal chemistry and beyond caused a striking rise in demand for novel FGs with a defined impact on the developed compound properties. In this work, the evaluation of the 3,3-difluorooxetane unit (3,3-diFox) as a functional group for bioisosteric replacements is disclosed. A comprehensive experimental study (including multigram building block synthesis, quantification of steric and electronic properties, measurements of pKa, LogP, chemical stability, and biological evaluation of the 3,3-diFox-derived bioisostere of a drug candidate) revealed a prominent behavior of the 3,3-diFox fragment as a versatile substituent for early drug discovery programs.

Molecular insight into biomass-burning smoke water-soluble organic matter binding with Cd(II): Comprehensive analysis from fluorescence EEM-PARAFAC, FT-ICR-MS and two-dimensional correlation spectroscopy.

The deposition of biomass-burning smoke water-soluble organic matter (BBS-WSOM) significantly affects the environmental behavior of heavy metals in aqueous environments. However, the interactions between BBS-WSOM and heavy metals at the molecular level remain unknown. This study combined FT-ICR-MS, fluorescence spectrum, FTIR, and two-dimensional correlation spectroscopy to anatomize the molecular characteristics of BBS-WSOM binding with Cd(II). The results show that CHO and CHOP compounds were responsible for the fluorescence response of BBS-WSOM at Ex: 225 nm and 275 nm/Em: 325 nm, and abundant proteins or CHON compounds were responsible for the fluorescence response of BBS-WSOM at Ex: 225-250 nm/Em: 350-450 nm and Ex: 300-350 nm/Em: 350-450 nm, which was very different from the fluorescence molecules in natural organic matters. Fluorescence change after Cd(II) addition indicated that CHOP and CHOS compounds enhanced BBS-WSOM binding with Cd(II). Differently, the CHON compounds could weaken the binding of other compounds with Cd(II). Different compounds binding with Cd(II) generally followed the order: CHON/CHOS compounds>CHOP compounds>CHO compounds, and the chemical groups binding with Cd(II) generally followed the prioritization: -COO-> -NH/SO>P = O/P-O>aromatic ring>CO>C-OH of phenol/alcohol>C-O-C. This study provides a profound insight into the interaction between BBS-WSOM and Cd(II) at the molecular level.

Does the response of Rubisco and photosynthesis to elevated [CO2] change with unfavourable environmental conditions?

Climate change due to anthropogenic CO2 emissions affects plant performance globally. To improve crop resilience, we need to understand the effects of elevated CO2 concentration (e[CO2]) on CO2 assimilation and Rubisco biochemistry. However, the interactive effects of e[CO2] and abiotic stress are especially unclear. This study analyses the CO2 effect on photosynthetic capacity under different water availability and temperature conditions in 42 different crop species, varying in functional group, photosynthetic pathway and phenological stage. We analysed close to 3000 data points extracted from 120 published manuscripts. For C3 species, e[CO2] increases net photosynthesis and intercellular [CO2], while reducing stomatal conductance and transpiration. Vmaxc, Rubisco in vitro extractable maximal activity and content also decrease with e[CO2] in C3 species, while C4 crops are less responsive to e[CO2]. The interaction with drought and/or heat stress does not significantly alter these photosynthetic responses, indicating that the photosynthetic capacity of stressed plants responds to e[CO2]. Moreover, e[CO2] has strong effect on the photosynthetic capacity of grasses mainly in the final stages of development. This study provides insight into the intricate interactions within the plant photosynthetic apparatus under the influence of climate change, enhancing the understanding of mechanisms governing plant responses to environmental parameters.

Synergistic Tri-efficiency Enhancement Utilizing Functionalized Covalent Organic Frameworks for Photocatalytic H2O2 Production.

The overall maximization of photocatalytic H2O2 production efficiency urgently requires the comprehensive optimization of each step in multiplex photocatalysis. Despite numerous endeavors, isolated researches focusing on single efficiencies hinder further advancements in overall catalytic activity. In this work, a series of imine-linked COFs (TT-COF-X), incorporating electronically tunable functional groups (X = ─H, ─OMe, ─OH, ─Br), are rationally fabricated for visible-light-driven H2O2 production via a dual-channel pathway involving 2e- water oxidation and 2e- oxygen reduction. Combined simulations and characterizations reveal that the synergistic modification of functional groups for electronic conjugation and locally intramolecular polarity collectively enhanced light absorption, charge separation and transfer, and interface water-oxygen affinity efficiency. Notably, femtosecond time-resolved transient absorption (fs-TA) reveals that the polarity-induced built-in electric field play a crucial role in facilitating exciton dissociation by reacting BIEF-mediated shallow trapping state. The simultaneously optimal tri-efficiency ultimately results in the highest H2O2 production rate of 3406.25 µmol h-1 g-1 and apparent quantum yields of 8.1% of TT-COF-OH. This study offers an emerging strategy to rational design of photocatalysts from the comprehensive tri-efficiency-oriented perspective.

Assessing ecological status using phytoplankton functional groups in three urban rivers in Hainan Island, China.

The urban rivers, including Changwang, Meishe, and Wuyuan in Haikou City, Hainan Island, are vital water sources for agricultural production and support industrial and domestic activities. Despite the rivers experiencing anthropogenic impacts, limited studies have assessed their water quality. Accordingly, this study assessed the phytoplankton community structure, utilized the river phytoplankton assemblage index (Qr index) to evaluate the ecological status, and compared its performance with the comprehensive trophic level index (TLI). Sample collection and microscopy analysis was conducted seasonally in 2019. Two hundred ninety-eight phytoplankton species belonging to 8 phyla were identified, predominated by Chlorophyta, Bacillariophyta, and Cyanophyta. The phytoplankton biomass ranged from 0.04 to 34.98 mg L-1, with averages of 3.06 ± 0.71, 5.16 ± 1.92, and 2.70 ± 0.76 mg L-1 in Changwang, Meishe, and Wuyuan, respectively. The phytoplankton biomass varied seasonally, recording the highest and lowest values in summer and autumn, respectively. The phytoplankton species were classified into 26 functional groups, which exhibited spatial and seasonal differences in their biomass and composition. The redundancy analysis (RDA) revealed that NH3-N, TP, CODMn, Chl-a, salinity, and temperature were the main environmental factors influencing phytoplankton functional groups. The average Qr index values in Changwang, Meishe, and Wuyuan were 3.39 ± 0.61, 3.44 ± 0.51, and 3.22 ± 0.67, and all the rivers were rated "good" in status. Seasonally, the Qr index and TLI revealed that the rivers' ecological condition was better in autumn and winter compared to spring and summer. Generally, the Qr index performed better, indicating that parameters such as NH3-N, CODMn, TP, and Chl-a decreased with improving ecological conditions from "poor" to "excellent" status. In addition, the Qr index exhibited a significant negative relationship with TLI, suggesting that low Qr index values may indicate increased eutrophication or deteriorated water quality. Thus, the ecological condition of the urban rivers could be adequately assessed using the Qr index to guide their water quality monitoring and management.

Different responses of individuals, functional groups and plant communities in CSR strategies to nitrogen deposition in high-altitude grasslands.

The Competitor, Stress Tolerator, and Ruderal (CSR) theory delineates the ecological strategies of plant species. Nevertheless, how these ecological strategies shift at the levels of individuals, functional groups and plant communities to cope with increasing nitrogen deposition remains unclear. In this study, simulated nitrogen deposition experiments were performed in high-altitude grasslands of alpine meadows and alpine steppe on the Qinghai-Tibetan Plateau (QTP) by employing the strategy and functional type framework (StrateFy) methodology to evaluate plant CSR strategies. Our results indicated that the dominant ecological strategy of the high-altitude grassland on the QTP were predominantly aligned with the R-strategy. In both alpine meadow and alpine steppe grasslands, the community-weighted mean (CWM) of C scores were increased with nitrogen addition, while CWM of R and S scores were not significantly correlated with nitrogen addition. Remarkably, the increase in C scores due to nitrogen enrichment was observed solely in non-legumes, suggesting an enhanced competitive capability of non-legumes in anticipation of future nitrogen deposition. Leymus secalinus was dominated in both alpine meadow and alpine steppe grasslands across all levels of nitrogen deposition, with increasing C scores along the nitrogen gradients. Furthermore, the sensitivity of C scores of individual plant, functional group and plant community to nitrogen deposition rates was more pronounced in alpine steppe grassland than in alpine meadow grassland. These findings furnish novel insights into the alterations of ecological strategies in high-altitude alpine grasslands on the QTP and similar regions worldwide in cope with escalating nitrogen deposition.

Binding characters of biomass burning smoke-derived dissolved organic matter with Cu(II) in aqueous environment: Roles of functional groups and organic components.

The environmental effect of biomass burning smoke-derived dissolved organic matter (BBS-DOM) has attracted growing attention due to the increasing wildfire globally. BBS-DOM eventually deposits on the water and soil environments, thus altering the environmental behaviors of pollutants (e.g., heavy metals) in the surface environments of the wildfire region. However, presently, the binding characters between heavy metals and BBS-DOM remains unknown. In this study, alfalfa, pinewood, and corn straw were burned at 300 °C and 600 °C to produce BBS-DOMs and their binding characters with Cu(II) were investigated using fluorescence excitation-emission matrix spectra coupled with parallel factor (EEM-PARAFAC), synchronous fluorescence spectra combined with two-dimensional correlation spectroscopy (2D-SFS-COS) and FTIR combined with two-dimensional correlation spectroscopy (2D-FTIR-COS). The fluorescence quenching/enhancing results after Cu(II) addition suggested that the binding capacities with Cu(II) of various organic components in BBS-DOMs followed an order of polyphenols-like matters (Ex/Em: 220 nm/310 nm) > aromatic protein-like matters (Ex/Em: 275 nm/310 nm) ≈ small humic-like matters (Ex/Em: 300 nm/380 nm) > large humic-like matters (Ex/Em: 330 nm/410 nm). Interestingly, the quenching effect of Cu(II) addition on the fluorescence intensities of polyphenols-like matters and humic-like matters decreased with their increasing abundances, which possibly depended on the proportion of organic ligands of these components. Furthermore, 2D-FTIR-COS demonstrated that the binding sequence of different functional groups followed deprotonated -COOH→deprotonated phenol-OH→-C]O of aldehydes, ketones, and lactones/aromatic rings/-NH→C-O-C/C-OH of ethers and alcohols. Another novelty was that Cu(II) binding could increase the molecular size and humification of BBS-DOMs, due to the bridge effect of Cu(II). This work provides an importantly theoretical basis for deeply understanding the mechanism of BBS-DOM binding with Cu(II) at the molecular level, which is a key for reasonably predicting the multimedia-crossing effects of BBS-DOM and the environmental behavior of heavy metals in the wildfire region.

Electrolyte Additive Molecule Disassembly to Reveal the Roles of Individual Groups in Zn Electrode Stabilities in Aqueous Batteries.

Zn metal anodes experience dendritic growth and hydrogen evolution reactions (HER) in aqueous batteries. Herein, we propose an interface regulation strategy with a trace (1.4 × 10-4 mol kg-1) all-in-one epicatechin (EC) electrolyte additive to solve the above issues and reveal the roles of individual functional groups. By the disassembly of EC into simple molecules combined with entire molecule investigations, we show that phenol and ether sites preferentially anchor on the Zn surface, while the hydroxyl group pointing outward enters Zn2+ solvation shells at the interface. It modifies the following desolvation path, which not only enables uniform deposition with the thermodynamically favored plate morphology but also inhibits HER. With these synergistic effects of trace EC additive, the lifespan of symmetric cells extends to 8.5 times that of the baseline ZnSO4 electrolyte. The capacity retention of Zn//MnO2 full batteries with N/P = 3 also increases from 59.1 to 85.6% after 500 cycles.

The Overlooked Role of Humin in Dark Hydroxyl Radical Production during Oxygenation.

Humin, endowed with abundant redox functional groups, can be reduced anaerobically under dark. When reduced humin encounters O2, the possibility of ·OH formation arises. However, the exploration of ·OH generation mediated by humin has not been comprehensively conducted. The study found that O2 oxidized the reduced humin, generating 8.61 µmol/g of ·OH. After isolating humin using the methyl isobutyl ketone (MIBK) method, the lipid component was identified as the primary contributor to ·OH generation. Subsequent polar separation revealed that the lipid fraction extracted from the ethanol-water mixture with a volume ratio of 7:3 (LFEW7:3) played the most significant role in ·OH production. Further characterization confirmed that the simultaneous presence of aromatic C═C and C═O were the predominant features contributing to the ·OH generation. The ·OH generation experiments with humin-pyridine analogue compound demonstrated that polycyclic pyridine N (≥3 rings) played a significant role in promoting the ·OH generation. Most importantly, the study compared the ·OH production by humin and homologous humic acid, indicating that ·OH generated by humin was higher than that of humic acid. Overall, these affirmative findings manifested the overlooked role of humin in ·OH production and offered valuable insights into the mechanism of ·OH generation by humin in the dark.