Identification and antifungal susceptibility testing of Candida haemulonii complex isolated from clinical samples.

Candida haemulonii complex (Candida haemulonii [I], Candida duobushaemulonii [II], and Candida haemulonii var. vulnera [III]) has become relevant in recent times, not so much because of a high incidence in human clinical sample cultures but because of its remarkable antifungal resistance. The objective of this study was to evaluate several methods for the identification of this uncommon species of Candida. Ten isolates of C. haemulonii were identified by biochemical and proteomic methods, and their antifungal susceptibility testing was performed by both commercial and reference methods. MALDI-TOF MS (Vitek MS and Vitek MS PRIME) and Vitek2 correctly identified these genera but API method did not. There was a good correlation between the commercial methods and the reference methods for the AST. In conclusion Vitek MS, Vitek MS PRIME, and Vitek2 systems, but not API32C, are reliable for identification of C. haemulonii complex. Furthermore, MALDI-TOF MS systems could identify to the subspecies level. Commercial methods for antifungal susceptibility testing are valid for the study of this species and confirm amphotericin B and to azole resistance.

A side-by-side comparison of the new VITEK MS PRIME and the MALDI Biotyper sirius in the clinical microbiology laboratory.

PURPOSE: This study aims to evaluate the performance of two latest generation matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) systems in routine laboratory settings, focusing on turnaround time (TAT), time to results (TTR), hands-on time, and identification rate. METHODS: We conducted a time and motion study on three workflow scenarios to simulate different laboratory settings. Overall, 618 bacterial isolates from a tertiary hospital's laboratory were processed using the VITEK MS PRIME (bioMérieux) and the MALDI Biotyper sirius (Bruker Daltonics) and their corresponding databases VITEK IVD Database 3.2 and MBT reference library 12. RESULTS: The target preparation process showed no significant difference in TAT, but the Biotyper workflow had a shorter hands-on time by 3 to 6 min. In the measurement process, TTR was three to five times shorter for the Biotyper sirius while hands-on time was significantly shorter for VITEK MS PRIME (approximately 1.5 min per target). The identification rate without retesting was 97.9% for VITEK MS PRIME and 98.9% for Biotyper sirius. Both systems achieved 100% agreement at genus and 96.2% at species level. CONCLUSION: Both systems exhibited excellent identification rates for routine bacterial isolates. Due to its high speed, the Biotyper sirius is suited for laboratories with high sample throughput and a workflow designed for processing larger batches. The VITEK MS PRIME, with its "load and go" system accommodating up to 16 targets, reduces hands-on time, making it a reasonable choice for laboratories with fewer identifications overall but a higher number of targets and a workflow designed for parallel processing on different workstations.

The challenges in the identification of Escherichia coli from environmental samples and their genetic characterization.

Escherichia coli bacteria are an essential indicator in evaluations of environmental pollution, which is why they must be correctly identified. This study aimed to determine the applicability of various methods for identifying E. coli strains in environmental samples. Bacterial strains preliminary selected on mFc and Chromocult media as E. coli were identified using MALDI Biotyper techniques, based on the presence of genes characteristic of E. coli (uidA, uspA, yaiO), as well as by 16S rRNA gene sequencing. The virulence and antibiotic resistance genes pattern of bacterial strains were also analyzed to investigate the prevalence of factors that may indicate adaptation to unsupportive environmental conditions and could have any significance in further identification of E. coli. Of the strains that had been initially identified as E. coli with culture-based methods, 36-81% were classified as E. coli with the use of selected techniques. The value of Cohen's kappa revealed the highest degree of agreement between the results of 16S rRNA gene sequencing, the results obtained in the MALDI Biotyper system, and the results of the analysis based on the presence of the yaiO gene. The results of this study could help in the selection of more accurate and reliable methods which can be used in a preliminary screening and more precise identification of E. coli isolated from environmental samples.

Comparison of MALDI-TOF mass spectrometry and rpoB gene sequencing for the identification of clinical isolates of Aeromonas spp.

Aeromonas spp., widely present in rivers and soil, cause mild gastroenteritis, severe septicemia, and soft tissue infections in humans. Treatment of these infections require accurate identification of pathogenic Aeromonas spp. However, identification at the species level using conventional methods is highly challenging. In this study, we aimed to compare the accuracy of two different approaches developed for bacterial identification: (i) housekeeping gene sequencing (rpoB) in conjunction with phylogenetic analysis and (ii) matrix-assisted laser desorption ionization mass spectrometry-time of flight (MALDI-TOF MS) (MALDI Biotyper and VITEK MS), for differentiating Aeromonas spp. We analyzed 58 Aeromonas isolates recovered from patients at different medical institutions in Japan using both identification methods. The rpoB sequencing method was the most accurate, identifying all Aeromonas isolates at the species level. Meanwhile, the MALDI Biotyper system correctly identified 53 (91.4%) isolates at the genus level and an additional 30 (51.7%) at the species level. The VITEK MS system correctly identified 58 (100%) isolates at the genus level and an additional 34 (58.6%) at the species level. Thus, MALDI Biotyper and VITEK MS accurately identified isolates at the genus level, but differences were found in the accuracy of identification of species. However, the low cost and ease of analysis make MALDI-TOF MS-based methods strong candidates for use in clinical laboratories that require easy-to-use identification methods.

Identification and Typing of Strains of Wood-Rotting Basidiomycetes by Protein Profiling Using MALDI-TOF MS.

The accurate identification and proper typing of basidiomycetes are required in medical, sanitary maintenance, agriculture, and biotechnology fields. A diagnostic method based on information from whole-cell proteins acquired by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was investigated to identify wood-rotting fungi, a group of filamentous fungi. In this study, mass spectra of intracellular peptides obtained from cultured mycelia of 50 strains of 10 wood-rotting fungal species were obtained multiple times and mass spectral patterns (MSPs) consisting of peaks that characterized the fungal species or strain was created to construct an in-house database. The species identification was conducted by comparing the newly obtained raw mass spectra with the MSPs in the database using the MALDI Biotyper. The results showed that the peak patterns of the mass spectra were reproducible and matched at the strain level. A cluster analysis based on the MSPs was also conducted to examine inter-and intraspecific diversity among the tested wood-rotting basidiomycetes. Most of the fungal strains examined in this study could be identified to a species level; however, the strains belonging to Pleurotus could only be identified to a genus level. This was due to an intraspecific variation, so the identification accuracy could be amendable with a more enhanced database.

Candida auris Identification and Profiling by MALDI-ToF Mass Spectrometry.

MALDI-ToF MS has become the standard method for routine identification of most medically important yeasts in clinical and public health laboratories and has largely replaced phenotypic identification methods as a first-line identification tool. Fungal identification is based on extensive and well-curated mass spectra libraries usually provided by the manufacturer of the MALDI-ToF MS platform; however, many centers do create specialized or in-house database collections to aid analysis. Most MALDI-ToF MS systems offer simple and standardized workflows for the identification of clinically relevant yeasts to species level with a high throughput, high accuracy, and a low overall cost per test. This makes MALDI-ToF MS an ideal platform for use in routine clinical, diagnostic, and research microbiology laboratories which may lack experience or expertise in the identification of pathogenic fungi.In this chapter we review three standard protocols for the proteomic-based identification of Candida auris isolated from cultures of clinical or environmental surveillance samples in diagnostic and research laboratories.

Optimized identification of microorganisms directly from positive blood cultures by MALDI-TOF to improve antimicrobial treatment.

OBJECTIVE: Bacteriemia is a major cause of morbidity and mortality among hospitalized patients worldwide. Early identification of microorganisms from blood culture can lead to improvement of treatment and outcomes. METHODS: The study was divided into two phases. The first phase when a comparison of the methods was made to check the concordance between them, using as a reference the standard method implemented in the laboratory. In a second phase, both methods are combined. We used the rapid identification method and when it could not identify we used the standard method. The microorganisms that were not identified by either of the two methods were identified from colony at 24 hours. RESULTS: A total of 589 microbial positive blood cultures have been included in the present study. With the rapid method we obtained 96% and 88% identification results for Gram-negative bacilli (GNB) and Gram-positive cocci (GPC) respectively. In this study we observed that the combination of the rapid and standard method achieved identifications of 98% and 97% for GNB and GPC respectively. CONCLUSIONS: The data analysed shows that both methods combined perform better than individually. We achieved an optimization of the identification of microorganisms directly from positive blood cultures by MALDI-TOF. This combination identified 98% of the microorganisms in between ten minutes to one hour and a half since the blood culture flagged positive.

Proteomic and microbial assessments on the effect of Antrodia cinnamomea in C57BL/6 mice.

Antrodia cinnamomea (AC) is a nutraceutical fungus and studies have suggested that AC has the potential to prevent or alleviate diseases. However, little is known about the AC-induced phenotypes on the intestine-liver axis and gut microbial alterations. Here, we performed two-dimensional difference gel electrophoresis (2D-DIGE) and MALDI-Biotyper to elaborate the AC-induced phenotypes on the intestine-liver axis and gut microbial distribution of C57BL/6 mice. The experimental outcomes showed that the hepatic density may increase by elevating hepatic redox regulation, lipid degradation and glycolysis-related proteins and alleviating cholesterol biosynthesis and transport-related proteins in C57BL/6 mice with AC treatment. Moreover, AC facilitates intestinal glycolysis, TCA cycle, redox and cytoskeleton regulation-related proteins, but also reduces intestinal vesicle transport-related proteins in C57BL/6 mice. However, the body weight, GTT, daily food/water intake, and fecal/urine weight were unaffected by AC supplementation in C57BL/6 mice. Notably, the C57BL/6-AC mice had a higher gut microbial abundance of Alistipes shahii (AS) than C57BL/6-Ctrl mice. In summary, the AC treatment affects intestinal permeability by regulating redox and cytoskeleton-related proteins and elevates the gut microbial abundance of AS in C57BL/6 mice that might be associated with increasing hepatic density and metabolism-related proteins of the liver in C57BL/6 mice. Our study provides an insight into the mechanisms of AC-induced phenotypes and a comprehensive assessment of AC's nutraceutical effect in C57BL/6 mice.

A New Application of MALDI Biotyper for a Potential Use in Therapeutic Drug Monitoring of Voriconazole.

We present a proof-of-concept study on the use of MALDI Biotyper to detect and monitor the levels of voriconazole in human serum. A simple extraction-concentration method and a MALDI Biotyper protocol were developed, and a parent ion of voriconazole (1 H+) could be detected and quantified with good reproducibility. Our results point to a new application of MALDI Biotyper for therapeutic drug monitoring.

Novel strategy of rapid typing of Shiga toxin-producing Escherichia coli using MALDI Biotyper and ClinProTools analysis.

INTRODUCTION: Rapid detection of Shiga toxin-producing Escherichia coli (STEC) is essential. Matrix-assisted laser-desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) allows rapid, accurate, and low-cost microbial identification. We aimed to examine the discrimination ability of MALDI Biotyper (Bruker Daltonics) between STEC and non-STEC. METHODS: In total, 234 strains (79 STEC strains and 155 non-STEC strains) isolated from stool between 2009 and 2014 were measured by MALDI Biotyper and mass spectra of 2000-20,000 m/z were analyzed with ClinProTools (Bruker Daltonics). Eighty-three strains were randomly extracted to produce STEC detection models using 3 algorithms, and 151 strains were used as validation samples to verify STEC detection performance and discrimination performance of Shiga toxins with the STEC detection models. RESULTS: The STEC detection model with Quick Classifier (QC) algorithm was the most sensitive: sensitivity, 84.1% (37/44); specificity, 94.4% (101/107). Discrimination between STEC and non-STEC was excellent, but individual discrimination of Shiga toxins was not possible. CONCLUSION: MALDI Biotyper may be a useful rapid diagnostic method for STEC infection.

Detection of Active BoNT/C and D by EndoPep-MS Using MALDI Biotyper Instrument and Comparison with the Mouse Test Bioassay.

Botulinum neurotoxins (BoNTs) are among the most poisonous known biological substances, and therefore the availability of reliable, easy-to use tools for BoNT detection are important goals for food safety and human and animal health. The reference method for toxin detection and identification is the mouse bioassay (MBA). An EndoPep-MS method for BoNT differentiation has been developed based on mass spectrometry. We have validated and implemented the EndoPep-MS method on a Bruker MALDI Biotyper for the detection of BoNT/C and D serotypes. The method was extensively validated using experimentally and naturally contaminated samples comparing the results with those obtained with the MBA. Overall, the limit of detection (LoD) for both C and D toxins were less than or equal to two mouse lethal dose 50 (mLD50) per 500 µL for all tested matrices with the exception of feces spiked with BoNT/C which showed signals not-related to specific peptide fragments. Diagnostic sensitivity, specificity and positive predictive value were 100% (95% CI: 87.66-100%), 96.08% (95% CI: 86.54-99.52%), and 93.33% (95% CI: 78.25-98.20%), respectively, and accuracy was 97.47% (95% CI: 91.15-99.69%). In conclusion, the tests carried out showed that the EndoPep-MS method, initially developed using more powerful mass spectrometers, can be applied to the Bruker MALDI Biotyper instrument with excellent results including for detection of the proteolytic activity of BoNT/C, BoNT/D, BoNT/CD, and BoNT/DC toxins.

Optimized rapid and reliable identification of Tuber spp. by matrix-assisted laser desorption ionization time-of-flight mass spectrometry.

Intentional substitution of food ingredients and misleading or false declarations of food products can lead to large economic damage in the food sector. An example is the truffle, an edible mushroom, with different species having a similar morphology. This makes it difficult to distinguish, for example, the high-quality black Périgord truffle from Europe and the lower quality black truffle from China. To detect and prevent potential food fraud and to be able to carry out quality assurance measures, the demand for suitable, fast and cost-effective examination methods for individual foodstuffs is increasing. In this article we present a method based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), which can differentiate and identify commercial truffles. For this purpose, highly specific mass spectrometric fingerprints of 73 truffle tubers from eight different species were generated. These were checked and compared under the criteria of a score evaluation, their protein spectra, and cluster formation. Standard laboratory equipment was used for this purpose, so that apart from the MALDI-TOF no expensive equipment or reagents were required. The study shows that the MALDI-TOF MS method can distinguish and identify Tuber spp. reliably, quickly and efficiently and can therefore be used for quality assurance and fraud control in the truffle market.

Cyanobacterial Classification with the Toxicity Using MALDI Biotyper.

An abnormal growth of cyanobacteria in eutrophicated freshwaters can cause various environmental problems. In particular, Microcystis producing hepatotoxic cyclic heptapeptides microcystins (MCs) has been globally observed. Recent studies have demonstrated that matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) offers a rapid classification of cyanobacteria; however, they have not fully considered the toxicity yet. In this study, we have performed MALDI-TOF MS for intact cyanobacterial cells using Biotyper software and optimized their conditions to achieve cyanobacterial classification with the toxicity. The detection mass range used for Biotyper was extended to cover small molecules, but their intense ions were suppressed as a function of the used instrument Autoflex Speed, which enabled simultaneous observations of large molecular fingerprints and small MCs with comparable ion intensity. Hierarchical clustering of mass spectra obtained under the optimized conditions differentiated toxic and non-toxic clusters of Microcystis strains and furthermore formed a tight cluster of non-toxic strains possessing the MC biosynthesis gene mcyG. Spectral libraries were expanded to >30 genera (>80 strains) under the default and optimized conditions to improve the confidence of cyanobacterial classification. Consequently, spectral library searching allowed for characterization of cyanobacteria from a field sample as mixed toxic and non-toxic Microcystis cells, without isolating those cells.

Mass spectrometry-based microbiological testing for blood stream infection.

BACKGROUND: The most successful application of mass spectrometry (MS) in laboratory medicine is identification (ID) of microorganisms using matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) in blood stream infection. We describe MALDI-TOF MS-based bacterial ID with particular emphasis on the methods so far developed to directly identify microorganisms from positive blood culture bottles with MALDI-TOF MS including our own protocols. We touch upon the increasing roles of Liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS) as well. MAIN BODY: Because blood culture bottles contain a variety of nonbacterial proteins that may interfere with analysis and interpretation, appropriate pretreatments are prerequisites for successful ID. Pretreatments include purification of bacterial pellets and short-term subcultures to form microcolonies prior to MALDI-TOF MS analysis. Three commercial protocols are currently available: the Sepsityper® kit (Bruker Daltonics), the Vitek MS blood culture kit (bioMerieux, Inc.), and the rapid BACpro® II kit (Nittobo Medical Co., Tokyo). Because these commercially available kits are costly and bacterial ID rates using these kits are not satisfactory, particularly for Gram-positive bacteria, various home-brew protocols have been developed: 1. Stepwise differential sedimentation of blood cells and microorganisms, 2. Combination of centrifugation and lysis procedures, 3. Lysis-vacuum filtration, and 4. Centrifugation and membrane filtration technique (CMFT). We prospectively evaluated the performance of this CMFT protocol compared with that of Sepsityper® using 170 monomicrobial positive blood cultures. Although preliminary, the performance of the CMFT was significantly better than that of Sepsityper®, particularly for Gram-positive isolates. MALDI-TOF MS-based testing of polymicrobial blood specimens, however, is still challenging. Also, its contribution to assessment of susceptibility and resistance to antibiotics is still limited. For this purpose, liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS) should be more useful because this approach can identify as many as several thousand peptide sequences. CONCLUSION: MALDI-TOF MS is now an essential tool for rapid bacterial ID of pathogens that cause blood stream infection. For the purpose of assessment of susceptibility and resistance to antibiotics of the pathogens, the roles of liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS) will increase in the future.

Evaluation of MALDI-TOF Mass Spectrometry in Diagnostic and Environmental Surveillance of Legionella Species: A Comparison With Culture and Mip-Gene Sequencing Technique.

Legionella spp. are widespread bacteria in aquatic environments with a growing impact on human health. Between the 61 species, Legionella pneumophila is the most prevalent in human diseases; on the contrary, Legionella non-pneumophila species are less detected in clinical diagnosis or during environmental surveillance due to their slow growth in culture and the absence of specific and rapid diagnostic/analytical tools. Reliable and rapid isolate identification is essential to estimate the source of infection, to undertake containment measures, and to determine clinical treatment. Matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS), since its introduction into the routine diagnostics of laboratories, represents a widely accepted method for the identification of different bacteria species, described in a few studies on the Legionella clinical and environmental surveillance. The focus of this study was the improvement of MALDI-TOF MS on Legionella non-pneumophila species collected during Legionella nosocomial and community surveillance. Comparative analysis with cultural and mip-gene sequencing results was performed. Moreover, a phylogenetic analysis was carried out to estimate the correlations amongst isolates. MALDI-TOF MS achieved correct species-level identification for 45.0% of the isolates belonging to the Legionella anisa, Legionella rubrilucens, Legionella feeleii, and Legionella jordanis species, displaying a high concordance with the mip-gene sequencing results. In contrast, less reliable identification was found for the remaining 55.0% of the isolates, corresponding to the samples belonging to species not yet included in the database. The phylogenetic analysis showed relevant differences inside the species, regruped in three main clades; among the Legionella anisa clade, a subclade with a divergence of 3.3% from the main clade was observed. Moreover, one isolate, identified as Legionella quinlivanii, displayed a divergence of 3.8% from the corresponding reference strain. However, these findings require supplementary investigation. The results encourage the implementation of MALDI-TOF MS in routine diagnostics and environmental Legionella surveillance, as it displays a reliable and faster identification at the species level, as well as the potential to identify species that are not yet included in the database. Moreover, phylogenetic analysis is a relevant approach to correlate the isolates and to track their spread, especially in unconventional reservoirs, where Legionella prevention is still underestimated.

Production, purification and kinetic characterization of glutaminase free anti-leukemic L-asparaginase with low endotoxin level from novel soil isolate.

Anti-leukemic enzyme L-asparaginase despite having significant applicability in medicine, holds side effects attributed to glutaminase activity and endotoxin content. Glutaminase activity proves to be toxic to non-tumor cells as glutamine is an essential amino acid. Endotoxin illicit the production of vasoactive amines and induce septic shock. Hence there is a need for glutaminase free L-asparaginase with minimum endotoxin level. The report aims at the development of a downstream process for purification of glutaminase free L-asparaginase and subsequent endotoxin removal. Producing bacteria were isolated from various soil samples and screened initially for asparaginase and glutaminase activity. The glutaminase free L-asparaginase producing bacteria were identified as Bacillus altitudinis. Production of L-asparaginase was optimized. The optimum medium comprised of comprising Lactose (1.5 g/L), NaCl (1.2 g/L), Yeast extract (5 g/L), L-asparagine (20 g/L) with pH 7.0 and incubation time of 18 h. Kinetic parameters Km and Vmax were computed to be 9.09x10-2M and 0.09 M/S. L-asparaginase Purification was achieved with a specific activity of 800 U/mg of enzyme. Molecular weight of the purified L-asparaginase was determined to be around 35 KDa using SDS-PAGE. The developed process also brought down the endotoxin content below the FDA recommended level. The endotoxin content of the purified enzyme was determined to be 0.015EU/mL.

Comparing identification of clinically relevant Prevotella species by VITEK MS and MALDI biotyper.

In this multicenter study, we aimed to evaluate the performance of MALDI Biotyper and VITEK MS, for identification of Prevotella species. Three hundred and fourteen clinical isolates, collected in eight European countries between January 2014 and April 2016, were identified at the collecting sites by MALDI Biotyper (versions 3.0 and 3.1) and then reidentified by VITEK MS (version 3.0) in the central laboratory. 16S rRNA gene sequencing was used as a standard method. According to sequence analysis, the 314 Prevotella strains belonged to 19 species. MALDI Biotyper correctly identified 281 (89.5%) isolates to the species level and 33 (10.5%) only at the genus level. VITEK MS correctly identified 253 (80.6%) isolates at the species level and 276 (87.9%) isolates at the genus level. Thirty-three isolates belonging to P. bergensis, P. conceptionensis, P. corporis, P. histicola, and P. nanciensis, unavailable in the VITEK MS 3.0 database, were resulted in genus level or no identification. Six Prevotella strains, belonged to P. veroralis, P. timonensis, and P. conceptionensis not represented in the MALDI Biotyper system database, were misidentified at the genus level. In conclusion, both VITEK MS and MALDI Biotyper provided reliable and rapid identification. However, the permanent extension of the databases is needed.

MALDI-Biotyper as a tool to identify polymer producer bacteria.

The methylotrophs bacteria can use methane and methanol as carbon sources to produce biopolymers including the polyhydroxybutyrate (PHB) a very promised substitute for the environment contaminant oil-derived polypropylene. This kind of bacteria can be very effective to help to decrease PHB price production and promote its use in substitution of several environment contaminant plastics. The search for methylotroph bacteria able to produce PHB is a very arduous job being necessary to grow all isolates and submit all of them to extraction processes and product characterization. Looking for time reducing and optimization of resources, we tested the Matrix Assisted Laser Desorption/Ionization technique (MALDI-Biotyper) to identify polymer producer bacteria based on a single isolated colony with success. The results showed here will contribute to speed-up and increase the discoveries of new bacteria strains able to produce PHB and other biopolymers.

Whole-Cell MALDI-TOF MS Versus 16S rRNA Gene Analysis for Identification and Dereplication of Recurrent Bacterial Isolates.

Many ecological experiments are based on the extraction and downstream analyses of microorganisms from different environmental samples. Due to its high throughput, cost-effectiveness and rapid performance, Matrix Assisted Laser Desorption/Ionization Mass Spectrometry with Time-of-Flight detector (MALDI-TOF MS), which has been proposed as a promising tool for bacterial identification and classification, could be advantageously used for dereplication of recurrent bacterial isolates. In this study, we compared whole-cell MALDI-TOF MS-based analyses of 49 bacterial cultures to two well-established bacterial identification and classification methods based on nearly complete 16S rRNA gene sequence analyses: a phylotype-based approach, using a closest type strain assignment, and a sequence similarity-based approach involving a 98.65% sequence similarity threshold, which has been found to best delineate bacterial species. Culture classification using reference-based MALDI-TOF MS was comparable to that yielded by phylotype assignment up to the genus level. At the species level, agreement between 16S rRNA gene analysis and MALDI-TOF MS was found to be limited, potentially indicating that spectral reference databases need to be improved. We also evaluated the mass spectral similarity technique for species-level delineation which can be used independently of reference databases. We established optimal mass spectral similarity thresholds which group MALDI-TOF mass spectra of common environmental isolates analogically to phylotype- and sequence similarity-based approaches. When using a mass spectrum similarity approach, we recommend a mass range of 4-10 kDa for analysis, which is populated with stable mass signals and contains the majority of phylotype-determining peaks. We show that a cosine similarity (CS) threshold of 0.79 differentiate mass spectra analogously to 98.65% species-level delineation sequence similarity threshold, with corresponding precision and recall values of 0.70 and 0.73, respectively. When matched to species-level phylotype assignment, an optimal CS threshold of 0.92 was calculated, with associated precision and recall values of 0.83 and 0.64, respectively. Overall, our research indicates that a similarity-based MALDI-TOF MS approach can be routinely used for efficient dereplication of isolates for downstream analyses, with minimal loss of unique organisms. In addition, MALDI-TOF MS analysis has further improvement potential unlike 16S rRNA gene analysis, whose methodological limits have reached a plateau.

Legionella contamination in warm water systems: A species-level survey.

Legionellae constitute a frequent contamination of warm water systems and can lead to serious infections. Therefore, in many countries it is mandatory to monitor warm water systems for their presence. The method of examination in Germany is regulated by guideline ISO 11731 and DIN EN ISO 11731-2, and the results are reported as concentration of Legionella spp. Only limited information is available on the presence of individual species of Legionellae in the examined systems, since most investigations and research focus solely on Legionella pneumophila as the most important human pathogen. In this study 76,220 samples obtained from 13,397 warm water systems originating from 24 different zip code districts covering an area of more than 71,000km2 in southern Germany were examined. This resulted in the identification of 47,924 Legionella isolates to the species level using a MALDI-TOF mass spectrometry-based method. Legionella species distribution was analyzed with respect to warm water system type, geographic region (defined as zip code district) and temperature during sample taking. Overall, 20.7% of the samples were found positive for Legionella species and 14 different species of Legionella were recovered. These were not equally present throughout the geographic area investigated, but instead an individual regional diversity of Legionella species was observed for the examined zip code districts. Although Legionella pneumophila represented 84% of all contaminations found, depending on the geographical region its proportion varied substantially between 57.5% and 91.2%. The occurrence of other species was also of importance since they accounted for up to 42% of contaminations regionally, with Legionella londiniensis being most prominent representing up to 38.8% of recovered colonies. In addition, the influence of temperature on the individual species was disparate, but the temperature range between 50°C and 59°C was identified as the optimal condition for facilitating emergence of the majority of recovered Legionella species. The identification of Legionella to the species level by MALDI-TOF allowed for a more concise depiction of the regional distribution and the ecology of this genus, and may be of additional value when counter measures need to be initiated.