Microcrystalline cellulose and itaconic acid pH sensitive semi interpenetrating network hydrogel for oral insulin delivery.

Diabetes mellitus is one of the important causes of death worldwide. Generally, a subcutaneous route is used for insulin administration, but has showed low patient compliance. Extensive research has been conducted to identify molecules capable of delivering insulin orally, for this hydrogel based on microcrystalline cellulose and itaconic acid have been produced and explored. Free radical polymerization as a technique was employed for manufacturing the hydrogels using potassium persulphate as initiator and N, N'-methylene bisacrylamide (NNMBA) as a crosslinker. These pH- sensitive exhibited a swelling capacity of up to 20.38 g/g in distilled water and also revealed stronger swelling in glucose solutions than saline solutions. The pH sensitivity of the hydrogels was confirmed by studying the swelling in different pH solutions. Alkaline solutions showed higher swelling than acidic solutions. SEM established the porous nature, and the structure was examined by FTIR analysis. Thermal degradation was examined using TGA. In vitro release study was done by Bradford assay at 595 nm. The result was further confirmed by in-vivo investigations on male Wistar adult rats and hence is an excellent vehicle for oral insulin administration.

Colonic targeting insulin-loaded trimethyl chitosan nanoparticles coated pectin for oral delivery: In vitro and In vivo studies.

Colon-targeted delivery offers several benefits for oral protein delivery, such as low proteolytic enzyme activity, a natural pH environment, and extended residence time, which improve the bioavailability of the encapsulated protein. Therefore, we hypothesize that developing a novel colonic nanocarrier system, featuring modified chitosan that is soluble at physiological pH and coated with a colon-degradable polymer, will provide an effective delivery system for oral insulin. This study aims to synthesize insulin-loaded pectin-trimethyl chitosan nanoparticles (Ins-P-TMC-NPs) as an oral insulin delivery system and to evaluate its efficacy both in vitro and in vivo. N-trimethyl chitosan (TMC), synthesized via a methylation method, was used to prepare insulin-TMC nanoparticles coated with pectin via the ionic gelation method. The nanoparticles were characterized for their physicochemical properties, cumulative release profile, and surface morphology. The in vitro biological cytotoxicity and cellular uptake of the nanoparticles were evaluated against HT-29 cells. The in vivo blood glucose-lowering effect and histological toxicity were assessed in diabetic male Sprague-Dawley rats. The results showed that Ins-P-TMC-NPs were spherical, with an average size of 379.40 ± 40.26 nm, a polydispersity index of 24.10 ± 1.03 %, a zeta potential of +17.20 ± 0.52 mV, and a loading efficiency of 83.21 ± 1.23 %. Compared to uncoated TMC nanoparticles, Ins-P-TMC-NPs reduced insulin loss in simulated gastrointestinal fluid by approximately 67.23 ± 0.97 % and provided controlled insulin release in simulated colonic fluid. In vitro bioactivity studies revealed that Ins-P-TMC-NPs were non-toxic, with cell viability of 91.12 ± 0.91 % after 24 h of treatment, and exhibited high cellular uptake in the HT-29 cell line with a fluorescence intensity of 37.80 ± 2.40 after 4 h of incubation. Furthermore, the in vivo study demonstrated a sustained reduction in blood glucose levels after oral administration of Ins-P-TMC-NPs, peaking after 8 h with a blood glucose reduction of 87 ± 1.03 %. Histological sections showed no signs of toxicity when compared to those of healthy rats. Overall, the developed colon-targeted oral insulin delivery system exhibits strong potential as a candidate for effective oral insulin administration.

Polyester Nanoparticles with Controlled Topography for Peroral Drug Delivery Using Insulin as a Model Protein.

Receptor-mediated polyester drug delivery systems have tremendous potential for improving the clinical performance of existing pharmaceutical drugs. Despite significant progress made in this area, it remains unclear how and to what extent the polyester nanoparticle surface topography would affect the in vitro, ex vivo and in vivo performance of a drug, and if there exists a correlation between in vitro and in vivo, as well as healthy versus pathophysiological states. Herein, we report a systematic investigation of the interactions between ligands and receptors as a function of the linker length, two-carbon (2C) versus four-carbon (4C). The in vitro, ex vivo and in vivo in healthy models validate the hypothesis that 4C has better reach and binding to the receptors. The results indicate that 4C offered better performance over 2C in vivo in improving the oral bioavailability of insulin (INS) by 1.1-fold (3.5-fold compared to unfunctionalized nanoparticles) in a healthy rat model. Similar observations were made in pathophysiological models; however, the effects were less prominent compared to those in healthy models. Throughout, ligand decorated nanoparticles outperformed unfunctionalized nanoparticles. Finally, a semimechanistic pharmacokinetic and pharmacodynamic (PKPD) model was developed using the experimental data sets to quantitatively evaluate the effect of P2Ns-GA on oral bioavailability and efficacy of insulin. The study presents a sophisticated oral delivery system for INS or hydrophilic therapeutic cargo, highlighting the significant impact on bioavailability that minor adjustments to the surface chemistry can have.

Ursodeoxycholic Acid-Decorated Zwitterionic Nanoparticles for Orally Liver-Targeted Close-Looped Insulin Delivery.

Oral insulin therapies targeting the liver and further simulating close-looped secretion face significant challenges due to multiple trans-epithelial barriers. Herein, ursodeoxycholic acid (UDCA)-decorated zwitterionic nanoparticles (NPs) (UC-CMs@ins) are designed to overcome these barriers, target the liver, and respond to glycemia, thereby achieving oral one-time-per-day therapy. UC-CMs@ins show excellent mucus permeability through the introduction of zwitterion (carboxy betaine, CB). Furthermore, UC-CMs@ins possess superior cellular internalization via proton-assisted amino acid transporter 1 (PAT1, CB-receptor) and apical sodium-dependent bile acid transporter (ASBT, UDCA-receptor) pathways. Moreover, UC-CMs@ins exhibit excellent endolysosomal escape ability and improve the basolateral release of insulin into the bloodstream via the ileal bile acid-binding protein and the heteromeric organic solute transporter (OSTα- OSTß) routes compared with non-UDCA-decorated C-CMs@ins. Therefore, CB and UDCA jointly overcome mucus and intestinal barriers. Additionally, UC-CMs@ins prevent insulin degradation in the gastrointestinal tract for crosslinked structure, improve insulin accumulation in the liver for UDCA introduction, and effectively regulate glycemia for "closed-loop" glucose control. Surprisingly, oral ingestion of UC-CMs@ins shows a superior effect on glycemia (≈22 h, normoglycemia) and improves postprandial glycemic levels in diabetic mice, illustrating the enormous potential of the prepared NPs as a platform for oral insulin administration in diabetes treatment.

A review on oral novel delivery systems of insulin through the novel delivery system formulations: A review.

Parenteral administration of insulin remains the most common route of administration, causing local hypertrophy at the injection sites because of multiple daily injections. Because of this, there is an interest and effort in oral insulin administration that is convenient and mimics the physiology of endogenous insulin secreted in the liver. However, oral insulin encountered different challenges due to abundant enzyme degradation, the presence of a mucus layer, and the underlying intestinal epithelial membrane barrier in the gastrointestinal tract. This narrative review reviewed the literature dealing with novel oral insulin delivery approaches. Various pieces of literature were searched, filtered, and reviewed from different sources, and the information obtained was organized, formulated, and finalized. Oral insulin has been formulated and extensively studied in various novel delivery approaches, such as nanoparticles, microspheres, mucoadhesive patches, encapsulations, hydrogels, ionic liquids, liposomes, and complexation. The efficiency of these formulations demonstrated improved efficiency and potency compared to free oral insulin delivery, but none of them have greater or equivalent potency to subcutaneous insulin. Future studies regarding dose-dependent therapeutic efficacy and the development of new novel formulations to produce comparable oral insulin to subcutaneous insulin are warranted to further support the suitability of the current platform for oral insulin delivery.

Enhance the oral insulin delivery route using a modified chitosan-based formulation fabricated by microwave.

Chitosan (Cs) was subjected to ball milling and subsequently functionalized with Dinitro salicylic acid (Cs-DNS) to enhance the efficacy of oral insulin delivery. The hydrodynamic spherical particle sizes exhibited 33.29 ± 5.08 nm for modified Cs-DNS NPs. Irrespective of insulin entrapment, zeta potential measurements revealed positively charged Cs-DNS NPs (+ 35 ± 3.5 mV). The entrapment performance (EP%) was evaluated in vitro, and insulin release patterns at various pH levels. The EP% for Cs-DNS NPs was 99.3 ± 1.6. Cs- DNS NPs retained a considerable amount of insulin (92 %) in an acidic medium, and significant quantities were released at increasing pH values over time. In vivo investigations, the diabetic rats which taken insulin-incorporated NPs had lower serum glucose levels (SGL) after 3 h to (39.4 ± 0.6 %) for Cs- DNS NPs. For insulin-incorporated Cs- DNS NPs, the bioavailability (BA%) and pharmacological availability (PA%) were 17.5 ± 0.31 % and 8.6 ± 0.8 %, respectively. The assertion above highlights the significance and effectiveness of modified chitosan in promoting insulin delivery, decreasing SGL levels, and guaranteeing safety.

Orally-delivered insulin-peptide nanocomplexes enhance transcytosis from cellular depots and improve diabetic blood glucose control.

Insulin regulates blood glucose levels, and is the mainstay for the treatment of type-1 diabetes and type-2 when other drugs provide inadequate control. Therefore, effective oral Insulin delivery would be a significant advance in drug delivery. Herein, we report the use of the modified cell penetrating peptide (CPP) platform, Glycosaminoglycan-(GAG)-binding-enhanced-transduction (GET), as an efficacious transepithelial delivery vector in vitro and to mediate oral Insulin activity in diabetic animals. Insulin can be conjugated with GET via electrostatic interaction to form nanocomplexes (Insulin GET-NCs). These NCs (size and charge; 140 nm, +27.10 mV) greatly enhanced Insulin transport in differentiated in vitro intestinal epithelium models (Caco2 assays; >22-fold increased translocation) with progressive and significant apical and basal release of up-taken Insulin. Delivery resulted in intracellular accumulation of NCs, enabling cells to act as depots for subsequent sustained release without affecting viability and barrier integrity. Importantly Insulin GET-NCs have enhanced proteolytic stability, and retained significant Insulin biological activity (exploiting Insulin-responsive reporter assays). Our study culminates in demonstrating oral delivery of Insulin GET-NCs which can control elevated blood-glucose levels in streptozotocin (STZ)-induced diabetic mice over several days with serial dosing. As GET promotes Insulin absorption, transcytosis and intracellular release, along with in vivo function, our simplistic complexation platform could allow effective bioavailability of other oral peptide therapeutics and help transform the treatment of diabetes.

In situ rearranged multifunctional lipid nanoparticles via synergistic potentiation for oral insulin delivery.

Oral administration of therapeutic peptides/proteins (TPPs) is confronted with multiple gastrointestinal (GI) barriers such as mucus and intestinal epithelium, and the first-pass metabolism in the liver is also responsible for low bioavailability. In situ rearranged multifunctional lipid nanoparticles (LNs) were developed to overcome these obstacles via synergistic potentiation for oral insulin delivery. After the reverse micelles of insulin (RMI) containing functional components were gavaged, LNs formed in situ under the hydration effect of GI fluid. The nearly electroneutral surface generated by the rearrangement of sodium deoxycholate (SDC) and chitosan (CS) on the reverse micelle core facilitated LNs (RMI@SDC@SB12-CS) to overcome mucus barrier and the sulfobetaine 12 (SB12) modification further promoted epithelial uptake of LNs. Subsequently, chylomicron-like particles formed by the lipid core in the intestinal epithelium were easily transported to the lymphatic circulation and then into the systemic circulation, thus avoiding hepatic first-pass metabolism. Eventually, RMI@SDC@SB12-CS achieved a high pharmacological bioavailability of 13.7% in diabetic rats. In conclusion, this study provides a versatile platform for enhanced oral insulin delivery.

pH-Responsive and Mucoadhesive Nanoparticles for Enhanced Oral Insulin Delivery: The Effect of Hyaluronic Acid with Different Molecular Weights.

Drug degradation at low pH and rapid clearance from intestinal absorption sites are the main factors limiting the development of oral macromolecular delivery systems. Based on the pH responsiveness and mucosal adhesion of hyaluronic acid (HA) and poly[2-(dimethylamino)ethyl methacrylate] (PDM), we prepared three HA-PDM nano-delivery systems loaded with insulin (INS) using three different molecular weights (MW) of HA (L, M, H), respectively. The three types of nanoparticles (L/H/M-HA-PDM-INS) had uniform particle sizes and negatively charged surfaces. The optimal drug loadings of the L-HA-PDM-INS, M-HA-PDM-INS, H-HA-PDM-INS were 8.69 ± 0.94%, 9.11 ± 1.03%, and 10.61 ± 1.16% (w/w), respectively. The structural characteristics of HA-PDM-INS were determined using FT-IR, and the effect of the MW of HA on the properties of HA-PDM-INS was investigated. The release of INS from H-HA-PDM-INS was 22.01 ± 3.84% at pH 1.2 and 63.23 ± 4.10% at pH 7.4. The protective ability of HA-PDM-INS with different MW against INS was verified by circular dichroism spectroscopy and protease resistance experiments. H-HA-PDM-INS retained 45.67 ± 5.03% INS at pH 1.2 at 2 h. The biocompatibility of HA-PDM-INS, regardless of the MW of HA, was demonstrated using CCK-8 and live-dead cell staining. Compared with the INS solution, the transport efficiencies of L-HA-PDM-INS, M-HA-PDM-INS, and H-HA-PDM-INS increased 4.16, 3.81, and 3.10 times, respectively. In vivo pharmacodynamic and pharmacokinetic studies were performed in diabetic rats following oral administration. H-HA-PDM-INS exhibited an effective hypoglycemic effect over a long period, with relative bioavailability of 14.62%. In conclusion, these simple, environmentally friendly, pH-responsive, and mucoadhesive nanoparticles have the potential for industrial development. This study provides preliminary data support for oral INS delivery.

Advances in buccal and oral delivery of insulin.

Diabetes mellitus is a metabolic endocrine disease characterized by chronic hyperglycemia with disturbances in metabolic processes, such as those related to carbohydrates, fat, and protein. There are two main types of this disease: type 1 diabetes (T1D) and type 2 diabetes (T2D). Insulin therapy is pivotal to the management of diabetes. Over the last two decades, many routes of administration, including nasal, pulmonary, rectal, transdermal, buccal, and ocular, have been investigated. Nevertheless, subcutaneous parenteral administration is still the most common route for insulin therapy. To overcome poor bioavailability and the barriers to oral insulin absorption, novel approaches in the field of oral drug delivery and administration have been brought about by the coalescence of different branches of nanoscience and nanotechnology, such as nanomedicine, nano-biochemistry, and nano-pharmacy. Novel drug delivery systems, including nanoparticles, nano-platforms, and nanocarriers, have been suggested. The objective of this review is to provide an update on the various promising approaches that have been explored and evaluated for the safe and efficient oral and buccal administration of insulin.

Dual crosslinking of folic acid-modified pectin nanoparticles for enhanced oral insulin delivery.

Pectin-based drug delivery systems hold great potential for oral insulin delivery, since they possess excellent gelling property, good mucoadhesion and high stability in the gastrointestinal (GI) tract. However, lack of enterocyte targeting ability and premature drug release in the upper GI tract of the susceptible ionic-crosslinked pectin matrices are two major problems to be solved. To address these issues, we developed folic acid (FA)-modified pectin nanoparticles (INS/DFAN) as insulin delivery vehicles by a dual-crosslinking method using calcium ions and adipic dihydrazide (ADH) as crosslinkers. In vitro studies indicated insulin release behaviors of INS/DFAN depended on COOH/ADH molar ratio in the dual-crosslinking process. INS/DFAN effectively prevented premature insulin release in simulated GI fluids compared to ionic-crosslinked nanoparticles (INS/FAN). At an optimized COOH/ADH molar ratio, INS/DFAN with FA graft ratio of 18.2% exhibited a relatively small particle size, high encapsulation efficiency and excellent stability. Cellular uptake of INS/DFAN was FA graft ratio dependent when it was at/below 18.2%. Uptake mechanism and intestinal distribution studies demonstrated the enhanced insulin transepithelial transport by INS/DFAN via FA carrier-mediated transport pathway. In vivo studies revealed that orally-administered INS/DFAN produced a significant reduction in blood glucose levels and further improved insulin bioavailability in type I diabetic rats compared to INS/FAN. Taken together, the combination of dual crosslinking and FA modification is an effective strategy to develop pectin nano-vehicles for enhanced oral insulin delivery.

Controlled synthesis of in-situ gold nanoparticles onto chitosan functionalized PLGA nanoparticles for oral insulin delivery.

Chitosan-based nanoparticles (chitosan nanoparticles (ChNps), chitosan gold Nps (ChAuNps), and chitosan gold Nps functionalized with poly lactic-co-glycolic acid (PLGA) (ChAuNps/PLGA)) were prepared as nanocarriers for insulin to improve its oral uptake. The emulsion solvent diffusion method was employed to functionalize the Nps with PLGA. TEM, SEM, DLS, and zeta potential were conducted to characterize the Nps. The morphological analysis confirmed the formation of spherical Nps with hydrodynamic particle sizes of 138±23, 16±2.2, and 50±9.3 nm for ChNps, ChAuNps, and ChAuNps/PLGA, respectively. Zeta potential measurements indicated two types of Nps, regardless of insulin entrapment, positively charged, (ChNps (+36 ± 4.2, +31 ± 2.2mv)) and ChAuNps (+37 ± 4.3, +33 ± 2.5mv) and negatively charged (ChAuNps/PLGA (-31 ± 2.7, -26 ± 2.1 mv)). The in vitro studies were assessed by measuring the entrapment efficiencies (EE%) and the release profiles of insulin at different pH values. EE% for ChNps, ChAuNps, and ChAuNps/PLGA were 97 ± 1.5, 98.4 ± 1.9, and 99 ± 1.2%, respectively. At an acidic medium, a significant level of insulin retention was observed (96 ± 0.08%) for ChAuNps/PLGA. While a high amount was released at higher pH values over an extended period of time. In vivo studies, diabetic rats treated with insulin-loaded Nps had reduced blood glucose level (BGL) (38 ± 2.8, 35 ± 6.5, and 27 ± 5.6%) for ChNps ChAuNps and ChAuNps/PLGA, respectively. The pharmacological availability (PA%) and bioavailability (FR%) for insulin-loaded ChAuNps/PLGA were 15.8 ± 0.71% and 7.7 ± 0.93%, respectively. Altogether, emphasize the role of biocompatible Nps and their efficiency in the convenient delivery of insulin, thus lowering the BGL in a safe condition.

The upregulated intestinal folate transporters direct the uptake of ligand-modified nanoparticles for enhanced oral insulin delivery.

Transporters are traditionally considered to transport small molecules rather than large-sized nanoparticles due to their small pores. In this study, we demonstrate that the upregulated intestinal transporter (PCFT), which reaches a maximum of 12.3-fold expression in the intestinal epithelial cells of diabetic rats, mediates the uptake of the folic acid-grafted nanoparticles (FNP). Specifically, the upregulated PCFT could exert its function to mediate the endocytosis of FNP and efficiently stimulate the traverse of FNP across enterocytes by the lysosome-evading pathway, Golgi-targeting pathway and basolateral exocytosis, featuring a high oral insulin bioavailability of 14.4% in the diabetic rats. Conversely, in cells with relatively low PCFT expression, the positive surface charge contributes to the cellular uptake of FNP, and FNP are mainly degraded in the lysosomes. Overall, we emphasize that the upregulated intestinal transporters could direct the uptake of ligand-modified nanoparticles by mediating the endocytosis and intracellular trafficking of ligand-modified nanoparticles via the transporter-mediated pathway. This study may also theoretically provide insightful guidelines for the rational design of transporter-targeted nanoparticles to achieve efficient drug delivery in diverse diseases.

Novel strategies to oral delivery of insulin: Current progress of nanocarriers for diabetes management.

Diabetes mellitus is one of the most serious public health problems in the world. Repeated daily injections of subcutaneous insulin is the standard treatment for patients with type 1 diabetes mellitus; however, subcutaneous insulin injections can potentially cause local discomfort, patient noncompliance, hypoglycemia, failure to regulate glucose homeostasis, infections, and fat deposits at the injection sites. In recent years, numerous attempts have been made to produce safe and efficient nanoparticles for oral insulin delivery. Oral administration is considered the most effective alternative route to insulin injection, but it is accompanied by several challenges related to enzymatic proteolysis, digestive breakdown, and absorption barriers. A number of natural and synthetic polymeric, lipid-based, and inorganic nanoparticles have been investigated for use. Although improvements have recently been made in potential oral insulin delivery systems, these require further investigation before clinical trials are conducted. In this review, new approaches to oral insulin delivery for diabetes treatment are discussed, including polymeric, lipid-based, and inorganic nanoparticles, as well as the clinical trials performed for this purpose.

pH-sensitive chitosan-deoxycholic acid/alginate nanoparticles for oral insulin delivery.

Oral absorption of peptides/proteins is usually compromised by various gastrointestinal tract barriers. To improve delivery efficiency, chitosan-conjugated deoxycholic acid (CS-DCA) coupled with sodium alginate (ALG) was prepared to load insulin into pH-sensitive nanoparticles. The insulin-loaded chitosan-deoxycholic acid/alginate nanoparticles (CDA NPs) were characterized by size (143.3 ± 10.8 nm), zeta potential (19.5 ± 1.6 mV), entrapment efficiency (61.14 ± 1.67%), and insulin drug loading (3.36 ± 0.09%). The CDA NPs exhibited pH-triggered release characteristics in vitro and protected the wrapped insulin from gastric degradation. Stability of the CDA NPs in enzyme-containing simulated gastrointestinal fluids suggested that the NPs could partially protect the wrapped insulin from enzymatic degradation. Additionally, CS-DCA-modified NPs promoted the permeability of Caco-2 cells and enhanced intracellular absorption of FITC-labeled insulin by 9.4 and 1.2-folds, when compared to insulin solution and unmodified NPs, respectively. The positively charged NPs increased intestinal villi adhesion and enhanced insulin absorption in the intestines of diabetic rat models. Furthermore, the hypoglycemic test showed that CDA NPs prolonged insulin release in vivo and exerted a remarkable hypoglycemic effect on diabetic rats with an oral bioavailability of 15%. In conclusion, CDA NPs is a potential oral insulin delivery system.

Glucose-Responsive Polyelectrolyte Complexes Based on Dendritic Mesoporous Silica for Oral Insulin Delivery.

The postprandial glycemic regulation is essential for diabetic patients to reduce the risk of long-term microvascular and macrovascular complications. Herein, we designed a glucose-responsive oral insulin delivery system based on polyelectrolyte complexes (PECs) for controlling the increasing postprandial glucose concentrations. Briefly, alginate-g-3-aminophenylboronic acid (ALG-g-APBA) and chitosan-g-3-fluoro-4-carboxyphenylboronic acid (CS-g-FPBA) were wrapped on mesoporous silica (MSN) to form the negative charged ALG-g-APBA@MSN and the positive charged CS-g-FPBA@MSN nanoparticles, with an optimum insulin loading capacity of 124 mg/g and 295 mg/g, respectively. ALG-g-APBA@MSN was further cross-linked with CS-g-FPBA@MSN to form PECs through electrostatic interaction and borate esters. The dense polyelectrolyte network wrapped on MSN was capable of preventing insulin from diffusion and regulating its release. The in vitro insulin release of PECs demonstrated an obvious glucose response profile in different glucose concentrations (0 mg/mL, 2 mg/mL, 5 mg/mL) and presented a switch "on" and "off" release regulation at hyperglycemic or normal state. The CCK-8 assay showed that none of the MSN, ALG-g-APBA@MSN, CS-g-FPBA@MSN, and PECs possessed cytotoxicity to Caco-2 cells. For in vivo tests, the oral PECs exhibited a significant hypoglycemic effect and maintained in the euglycemic levels up to approximately 12 h on diabetic rats. Overall, the PECs directly triggered by postprandial glucose in the intestine have a good potential to be applied in intelligent insulin delivery by the oral route.

In vitro and in vivo evaluations on nanoparticle and phospholipid hybrid nanoparticles with absorption enhancers for oral insulin delivery.

Oral delivery of peptide and proteins is challenging due to their poor physical and chemical stability which usually results in inadequate therapeutic efficacy. Nanoparticles encapsulating insulin was developed by the ionic gelation technique using sulfobutyl ether-ß-cyclodextrin as an anionic linker. Phospholipid hybrid nanoparticles were formulated by utilizing ionic gelation and thin-film hydration methods using D-α-Tocopheryl polyethylene glycol 1000 succinate, sodium deoxycholate separately and in combination to take the advantage of liposomes and nanoparticles also various absorption enhancement mechanisms. All formulations were characterized and tested for in vitro gastrointestinal stability, in vitro drug release, and cytotoxicity. On the other hand, in vivo effects of developed formulations on reducing blood glucose levels were monitored for 8 hours. Phospholipid hybrid nanoparticles including D-α-Tocopheryl polyethylene glycol 1000 succinate and sodium deoxycholate in combination with 548.7 nm particle size, 0.332 polydispersity index, 22.0 mV zeta potential, and 61.9% encapsulation efficiency, exhibited desired gastrointestinal stability and insulin release in vitro. In addition, the formulation proved its safety with cytotoxicity studies on L929 cells. The subjected phospholipid hybrid nanoparticle formulation was found to be the most effective formulation by reducing and maintaining blood glucose levels with avoiding fluctuations.

Study on the Influencing Factors of Hypoglycemic Effect of Folate Targeted Polymersomes Encapsulating Insulin.

PURPOSE: To study the effects of the density of folic acid (FA) on the hypoglycemic ability of FA-targeted polymersomes as oral insulin carriers. Also to study the change of the hypoglycemic effect of FA-targeted mixed polymersomes added with various mass ratio of d-α-tocopherol polyethylene glycol 1000 succinate (TPGS). METHODS: The FA-targeted polymersomes with different FA molar contents were prepared. The in vitro insulin release experiments in different media for FA-targeted polymersomes with various FA contents were studied. Their quantitative cellular uptake in Caco-2 cells was examined. The in vivo hypoglycemic activity of FA-targeted polymersomes was also studied with diabetic rats. The polymersomes with the optimal FA molar content was chosen to prepare mixed polymersomes with various TPGS contents. RESULTS: Among insulin-loaded FA-targeted polymersomes with four different FA molar contents, insulin-loaded polymersomes with 10% FA molar content (insulin-loaded 10%FA-Ps) showed the hightest cellular uptake and the best hypoglycemic response. In addition, the insulin-loaded FA-Ps/TPGS5:1 mixed polymersomes exhibited higher cellular uptake and better hypoglycemic response than the other two insulin-loaded mixed polymersomes adding TPGS did. CONCLUSIONS: FA-Ps/TPGS5:1 could be a promising formulation for the oral administration of insulin.

Long-term treatment of polysaccharides-based hydrogel microparticles as oral insulin delivery in streptozotocin-induced type 2 diabetic mice.

To develop a more effective and safer drug for the treatment of type 2 diabetes mellitus (T2DM), polysaccharides-based hydrogel microparticles as oral insulin delivery was prepared and explored. This study was aimed to evaluate the antidiabetic effects and hypoglycemic mechanism with long-term administration(four weeks) of oral insulin hydrogel microparticles in type 2 diabetic mice on a model of diabetes using a high fat diet combined with streptozotocin. The results revealed that the long-term treatment of oral insulin polysaccharides-based hydrogel microparticles could significantly alleviate the symptoms of polyphagia, polydipsia, polyuria and weight loss in diabetic mice. Also, oral administration of insulin hydrogel microparticles could significantly reduce fasting blood glucose levels, ameliorate insulin resistance and increase insulin sensitivity in the mice with T2DM. The concentration of plasma TG, TC, LDL-C, FFA, BUN, CRE significantly decreased and the levels of HDL-C increased showed that insulin polysaccharides-based hydrogel microparticles were effective in regulating lipid metabolism and prevent diabetic nephropathy complication in diabetic mice. In addition, the supplementation of insulin hydrogel microparticles could significant improve the antioxidant capacity by increasing the level of SOD, CAT and decreasing the level of MDA, GPT, NO, TNF-α, and reverse histological deterioration of kidney and pancreas in diabetic mice. The above outcome concluded that insulin polysaccharides-based hydrogel microparticles may exhibit promising anti-diabetic activity and the potential to be a drug candidate for T2DM.

Recent Progress of Chitosan and Chitosan Derivatives-Based Nanoparticles: Pharmaceutical Perspectives of Oral Insulin Delivery.

Diabetes mellitus is a chronic endocrine disease, affecting more than 400 million people around the world. Patients with poorly controlled blood glucose levels are liable to suffer from life-threatening complications, such as cardiovascular, neuropathy, retinopathy and even premature death. Today, subcutaneous parenteral is still the most common route for insulin therapy. Oral insulin administration is favourable and convenient to the patients. In contrast to injection route, oral insulin delivery mimics the physiological pathway of endogenous insulin secretion. However, oral insulin has poor bioavailability (less than 2%) due to the harsh physiological environment through the gastrointestinal tract (GIT). Over the last few decades, many attempts have been made to achieve an effective oral insulin formulation with high bioavailability using insulin encapsulation into nanoparticles as advanced technology. Various natural polymers have been employed to fabricate nanoparticles as a delivery vehicle for insulin oral administration. Chitosan, a natural polymer, is extensively studied due to the attractive properties, such as biodegradability, biocompatibility, bioactivity, nontoxicity and polycationic nature. Numerous studies were conducted to evaluate chitosan and chitosan derivatives-based nanoparticles capabilities for oral insulin delivery. This review highlights strategies that have been applied in the recent five years to fabricate chitosan/chitosan derivatives-based nanoparticles for oral insulin delivery. A summary of the barriers hurdle insulin absorption rendering its low bioavailability such as physical, chemical and enzymatic barriers are highlighted with an emphasis on the most common methods of chitosan nanoparticles preparation. Nanocarriers are able to improve the absorption of insulin through GIT, deliver insulin to the blood circulation and lower blood glucose levels. In spite of some drawbacks encountered in this technology, chitosan and chitosan derivatives-based nanoparticles are greatly promising entities for oral insulin delivery.