Bioelectrical impedance phase angle and the mortality in critically ill children.

Background: Phase angle (PhA) is a variable obtained from bioelectrical impedance analysis (BIA). It is highly sensitive and specific and is commonly used in clinical nutrition assessment. Recently, PhA has shown promise in predicting clinical outcomes, especially as a new indicator of mortality, but its use in pediatric research is limited. This study aims to investigate the association between PhA measured at admission using BIA and PICU length of stay (LOS) and 60-day mortality in critically ill children and adolescents. Methods: A consecutive series of pediatric patients in the PICU underwent BIA measurements within 72 h of admission. All patients met the inclusion and exclusion criteria. Patient demographics, anthropometric measurements, pediatric index of mortality 2 score (PIM-2), and laboratory exams were recorded. Kaplan-Meier (K-M) survival curves were constructed based on the critical PhA value to assess differences in survival status within the 60-day window. Multivariate cox regression model was employed to illustrate the relationship between PhA and 60-day mortality rates. The Youden's index method was used to identify the critical cut-off value for PhA in relation to mortality rates. ROC curves provided the area under the curve (AUC) and a 95% confidence interval (CI). Results: A total of 205 pediatric patients (118 boys) were included, with a mean age of 9.2 years (±6.0). Survival curves indicated a cutoff value of 3.1°, with higher survival in patients with PhA ≥3.1° compared to those with PhA <3.1° (F = 10.51, p < 0.0001). The area under the ROC curve was 0.70, with a sensitivity of 0.65 and specificity of 0.72. Total hospital LOS was longer in the PhA <3.1° group compared to the PhA ≥3.1° group (p = 0.000). The PhA <3.1° group had a longer PICU LOS (adjusted for age and sex, HR 1.871, p = 0.000, log-rank test, p = 0.000). PhA and PIM-2 were two independently significant correlated variables (p < 0.05) for the 60-day mortality rate in this study. Conclusion: Low PhA in patients is associated with longer PICU LOS and an increased risk of PICU patient mortality. PhA not only serves as an indicator for monitoring pediatric nutrition but also as a prognostic indicator for PICU patients.

Integrating multiregulatory analysis reveals the negative regulatory function of miR482a in the response of poplar to canker pathogen infection.

Canker disease caused by the bacterium Lonsdalea populi is one of the most destructive diseases affecting poplar stems. However, the detailed stress response mechanisms of poplar have not been widely characterized. To explore the diverse regulatory RNA landscape and the function of key regulators in poplar subjected to L. populi stress, we integrated time-course experiment with mock-inoculation (CK) and inoculation (IN) with L. populi at the first, third, and sixth day (IN1, IN3, IN6) on Populus × euramericana cv. '74/76' (107), small RNA-seq, whole transcriptome-wide analysis, degradome analysis and transgenic experiments. A total of 98 differentially expressed (DE) miRNA, 17 974 DEmRNA, and 807 DElncRNA were identified in poplar infected by L. populi, presenting dynamic changes over the infection course. Regulatory networks among RNAs were further constructed. Notably, a network centered on ptc-miR482a in CK-vs-IN3 contained most DEGs. We show that miR482a and miR1448 are located in one transcript as a polycistron. Overexpression of pre-miR482a-miR1448 (OX482-1448) and pre-miR482a (OX482) increased poplar susceptibility to canker pathogen with reduced accumulation of reactive oxygen species, while the suppression of miR482a (STTM482) conferred poplar disease resistance. PHA7 was validated as the target of miR482a with degradome sequencing and tobacco transient co-transformation, its expression being downregulated in OX482-1448 and OX482 lines. Additionally, a series of phasiRNAs were triggered by miR482a targeting PHA7, forming regulatory cascades with more RLP, NBS-LRR, and PK genes, further verifying the defense function of miR482a. These findings provide insights for understanding the roles of ncRNAs and regulatory networks involved in poplar immunity.

Bioplastic production by harnessing cyanobacteria-rich microbiomes for long-term synthesis.

Departing from the conventional axenic and heterotrophic cultures, our research ventures into unexplored territory by investigating the potential of photosynthetic microbiomes for polyhydroxybutyrate (PHB) synthesis, a biodegradable polyester that presents a sustainable alternative to conventional plastics. Our investigation focused on a cyanobacteria-enriched microbiome, dominated by Synechocystis sp. and Synechococcus sp., cultivated in a 3 L photobioreactor under non-sterile conditions, achieving significant PHB production-up to 28 % dry cell weight (dcw) over a span of 108 days through alternating cycles of biomass growth and PHB accumulation. Nile Blue staining and Transmission Electron Microscope visualization allowed to successfully confirm the presence of PHB granules within cyanobacteria cells. Furthermore, the overexpression of PHA synthase during the accumulation phase directly correlated with the increased PHB production. Also, gene expression changes revealed glycogen as the primary storage compound, but under prolonged macronutrient stress, there was a shift of the carbon flux towards favoring PHB synthesis. Finally, analysis through Raman, Fourier- transform infrared spectroscopy and proton Nuclear Magnetic Resonance further validated the extracted polymer as PHB. Overall, it was demonstrated for the first time the feasibility of using phototrophic microbiomes to continuous production of PHB in a non-sterile system. This study also offers valuable insights into the metabolic pathways involved.

Production of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by Haloferax mediterranei Using Candy Industry Waste as Raw Materials.

The haloarchaeon Haloferax mediterranei synthesizes poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) under unfavorable nutritional conditions without the addition of any precursor to the culture, which is an advantage compared to other microbial counterparts able to synthesize polyhydroxyalkanoates (PHA). PHBV is a biodegradable polymer showing physiochemical properties of biotechnological and biomedical interest and can be used as an alternative to plastics made from chemical synthesis (which are not environmentally friendly). The versatile metabolism of H. mediterranei makes the use of waste as a carbon source for cellular growth and PHA synthesis possible. In this work, cellular growth and the production and characterization of PHBV using two different types of confectionery waste were analyzed and compared with cellular growth and PHBV synthesis in a standard culture media with glucose of analytical grade as a carbon source. The PHBV granules produced were analyzed by TEM and the biopolymer was isolated and characterized by GC-MS, FTIR NMR, and DSC. The results reveal that H. mediterranei can use these two residues (R1 and R2) for pure PHBV production, achieving 0.256 and 0.983 g PHBV/L, respectively, which are among the highest yields so far described using for the first-time waste from the candy industry. Thus, a circular economy-based process has been designed to optimize the upscaling of PHBV production by using haloarchaea as cell factories and valorizing confectionery waste.

Hints from nature for a PHA circular economy: Carbon synthesis and sharing by Pseudomonas solani GK13.

Polyhydroxyalkanoates (PHAs) are a well-known group of biodegradable and biocompatible bioplastics that are synthesised and stored by microorganisms as carbon and energy reservoirs. Extracellular PHA depolymerases (ePhaZs), secreted by a limited range of microorganisms, are the main hydrolytic enzymes responsible for their environmental degradation. Pseudomonas sp. GK13, initially identified as P. fluorescens GK13, produces PHA and a prototypic ePhaZ that specifically degrades mcl-PHA. In this study, a comprehensive characterization of strain GK13 was performed. The whole genomic sequence of GK13 was consolidated into one complete chromosome, leading to its reclassification as P. solani GK13. We conducted a detailed in silico examination of the bacteria genomic sequence, specifically targeting PHA metabolic functions. From the different growth conditions explored, PHA accumulation occurred only under carbon/nitrogen (C/N) imbalance, whereas ePhaZ production was induced even at balanced C/N ratios in mineral media. We extend our study to other bacteria belonging to the Pseudomonas genus revealing that the ePhaZ production capacity is closely associated with mcl-PHA synthesis capacity, as also suggested by metagenomic samples. This finding suggests that these types of microorganisms could contribute to the carbon economy of the microbial community, by storing PHA in carbon-rich times, and sharing it with the rest of the population during times of carbon scarcity through PHA hydrolysis. The conclusion pointed that carbon cycle metabolism performed by P. solani GK13 may contribute to the environmental circular economy at a microscopic scale.

Pseudohypoaldosteronism Type 1b in a Saudi Female Infant Due to Homozygous Variant Gene Mutation in SCNN1A: A Case Report.

Pseudohypoaldosteronism type 1 (PHA1) is a rare, heterogeneous group of disorders characterized by resistance to aldosterone action. We report the case of a 17-day-old Saudi female infant who presented on the third day of life with persistent hyperkalemia, hyponatremia, and metabolic acidosis. Initial evaluation for congenital adrenal hyperplasia was unremarkable. Genetic testing confirmed a novel homozygous variant (c.1522C>T p.(Arg508) chr 12:6458147 in SCNN1 A) in the SCNN1A gene, consistent with the diagnosis of PHA1B, a genetically confirmed subtype of PHA1. Prompt recognition and management of electrolyte disturbances are crucial in these neonates to prevent life-threatening complications.

Recent Advances in Food Waste Transformations into Essential Bioplastic Materials.

Lignocellulose is a major biopolymer in plant biomass with a complex structure and composition. It consists of a significant amount of high molecular aromatic compounds, particularly vanillin, syringeal, ferulic acid, and muconic acid, that could be converted into intracellular metabolites such as polyhydroxyalkanoates (PHA) and hydroxybutyrate (PHB), a key component of bioplastic production. Several pre-treatment methods were utilized to release monosaccharides, which are the precursors of the relevant pathway. The consolidated bioprocessing of lignocellulose-capable microbes for biomass depolymerization was discussed in this study. Carbon can be stored in a variety of forms, including PHAs, PHBs, wax esters, and triacylglycerides. From a biotechnology standpoint, these compounds are quite adaptable due to their precursors' utilization of hydrogen energy. This study lays the groundwork for the idea of lignocellulose valorization into value-added products through several significant dominant pathways.

Advances in Microbial Biotechnology for Sustainable Alternatives to Petroleum-Based Plastics: A Comprehensive Review of Polyhydroxyalkanoate Production.

The industrial production of polyhydroxyalkanoates (PHAs) faces several limitations that hinder their competitiveness against traditional plastics, mainly due to high production costs and complex recovery processes. Innovations in microbial biotechnology offer promising solutions to overcome these challenges. The modification of the biosynthetic pathways is one of the main tactics; allowing for direct carbon flux toward PHA formation, increasing polymer accumulation and improving polymer properties. Additionally, techniques have been implemented to expand the range of renewable substrates used in PHA production. These feedstocks are inexpensive and plentiful but require costly and energy-intensive pretreatment. By removing the need for pretreatment and enabling the direct use of these raw materials, microbial biotechnology aims to reduce production costs. Furthermore, improving downstream processes to facilitate the separation of biomass from culture broth and the recovery of PHAs is critical. Genetic modifications that alter cell morphology and allow PHA secretion directly into the culture medium simplify the extraction and purification process, significantly reducing operating costs. These advances in microbial biotechnology not only enhance the efficient and sustainable production of PHAs, but also position these biopolymers as a viable and competitive alternative to petroleum-based plastics, contributing to a circular economy and reducing the dependence on fossil resources.

Effect of mutation of phaC on carbon supply, extracellular polysaccharide production, and pathogenicity of Xanthomonas oryzae pv. oryzae.

Xanthomonas oryzae pv. oryzae (Xoo) causes bacterial blight in rice. Polyhydroxyalkanoates (PHAs) consitute a diverse group of biopolyesters synthesized by bacteria under nutrient-limited conditions. The phaC gene is important for PHA polymerization. We investigated the effects of phaC gene mutagensis in Xoo strain PXO99A. The phaC gene knock-out mutant exhibited reduced swarming ability relative to that of the wild-type. Under conditions where glucose was the sole sugar source, extracellular polysaccharide (EPS) production by ΔphaC declined by 44.8%. ΔphaC showed weak hypersensitive response (HR) induction in the leaves of non-host Nicotiana tabacum, concomitant with downregulation of hpa1 gene expression. When inoculated in rice leaves by the leaf-clipping method, ΔphaC displayed reduced virulence in terms of lesion length compared with the wild-type strain. The complemented strain showed no significant difference from the wild-type strain, suggesting that the deletion of phaC in Xoo induces significant alterations in various physiological and biological processes. These include bacterial swarming ability, EPS production, transcription of hrp genes, and glucose metabolism. These changes are intricately linked to the energy utilization and virulence of Xoo during plant infection. These findings revealed involvement of phaC in Xoo is in the maintaining carbon metabolism by functioning in the PHA metabolic pathway.

Optimizing Polyhydroxyalkanoate production using a novel Bacillus paranthracis isolate: A response surface methodology approach.

Microorganisms have emerged as promising resources for producing economical and sustainable bioproducts like Polyhydroxyalkanoate (PHA), a biodegradable polymer that can replace synthetic plastics. In this study, we screened a novel isolate, Bacillus paranthracis RSKS-3 strain, to produce PHA from sewage water, identifying it using Whole Genome Sequence. This study represents the first report on optimizing PHA production using B. paranthracis RSKS-3, employing Design Expert 12.0 software. Our findings reveal that four factors (temperature, inoculum size, potassium dihydrogen phosphate, and magnesium sulfate) significantly affect PHA production in the Plackett-Burman design experiment. Through Response Surface Methodology, we optimized PHA production to 0.647 g/L with specific values for potassium dihydrogen phosphate (0.55 %), inoculum size (3 %), magnesium sulfate (0.055 %), and a temperature of 35 °C, in agreement with the predicted value of 0.630 g/L. This optimization resulted in a substantial 13.29-fold increase in PHA production from 0.34 g/L to 4.52 g/L, underscoring the promising role of B. paranthracis RSKS-3 in eco-friendly PHA production and advancing sustainable bioproduct development.

Pseudomonas rhizophila S211 as a microbial cell factory for direct bioconversion of waste cooking oil into medium-chain-length polyhydroxyalkanoates.

The present study examines the use of waste cooking oil (WCO) as a substrate for medium-chain-length polyhydroxyalkanoates (mcl-PHA) production by Pseudomonas rhizophila S211. The genome analysis revealed that the S211 strain has a mcl-PHA cluster (phaC1ZC2DFI) encoding two class II PHA synthases (PhaC1 and PhaC2) separated by a PHA depolymerase (PhaZ), a transcriptional activator (PhaD) and two phasin-like proteins (PhaFI). Genomic annotation also identified a gene encoding family I.3 lipase that was able to hydrolyze plant oils and generate fatty acids as favorable carbon sources for cell growth and PHA synthesis via ß-oxidation pathway. Using a three-variable Doehlert experimental design, the optimum conditions for mcl-PHA accumulation were achieved in 10% of WCO-based medium with an inoculum size of 10% and an incubation period of 48 h at 30 °C. The experimental yield of PHA from WCO was 1.8 g/L close to the predicted yield of 1.68 ± 0.14 g/L. Moreover, 1H nuclear magnetic resonance spectroscopy analysis confirmed the extracted mcl-PHA. Overall, this study describes P. rhizophila as a cell factory for biosynthesis of biodegradable plastics and proposes green and efficient approach to cooking oil waste management by decreasing the cost of mcl-PHA production, which can help reduce the dependence on petroleum-based plastics.

Characterization of the conversion system of natural rubber to poly(3-Hydroxyalkanoate) in Piscinibacter gummiphilus strain NS21T.

Poly(3-hydroxyalkanoate) (PHA), a bacteria-synthesized biodegradable polyester, is a useful alternative to fossil resources, and current systems for its production rely predominantly on edible resources, raising concerns about microbial competition for nutrients. Therefore, we investigated mechanisms underlying PHA production from non-edible resources by Piscinibacter gummiphilus strain NS21T. Strain NS21T can utilize natural rubber as a carbon source on solid media and potentially produces PHA. Gas chromatography and nuclear magnetic resonance analyses of NS21T cell extracts revealed the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(3-hydroxybutyrate) from natural rubber and glucose, respectively. Transcriptional analysis suggested that phaC is involved in PHA production. An increased PHBV accumulation rate under nitrogen-limiting conditions indicates the potential of this strain to be used as a PHBV production enhancement strategy. Furthermore, the disruption of PHA depolymerase genes resulted in enhanced PHA production, indicating the involvement of these genes in PHA degradation. These findings highlight the potential of NS21T for PHBV production from natural rubber, a non-edible resource.

Corticosterone treatment results in fat deposition and body mass maintenance without effects on feeding behaviour or immunity in female lizards (Tropidurus catalanensis).

Throughout life, animals must maintain homeostasis while coping with challenging events. The period after reproduction can be challenging for oviparous females to maintain homeostasis since they direct most of their energy stores to vitellogenesis, possibly increasing the vulnerability to stressors. Changes in glucocorticoids' (GC) secretion promote various behavioural and physiological adjustments daily and to restore balance after facing stressors. However, when GC are elevated for extended periods, which usually occurs in response to chronic exposure to stressors, they can affect feeding behaviour and suppress the immune function. We aim to elucidate the effects of chronic corticosterone (CORT) exposure on feeding behaviour, body condition and immune function in female lizards, Tropidurus catalanensis, in the post-reproductive period. Thirty animals were divided into three groups: 1. Control (no experimental procedure performed); 2. Empty Implant (animals implanted with empty silastic tube); and 3. CORT Implant (animals implanted with silastic tube filled with CORT, with a chronic continuous release for at least a week). CORT plasma levels feeding behaviour, body condition (body index [BI] and fat index [FI]), leukocyte count, and several immune function variables (bacterial killing ability [BKA], hemagglutination titer, phytohemagglutinin [PHA] immune challenge and leukocyte count) were evaluated. After implantation, CORT treated animals maintained stable body mass through the experiment, while Control and Empty Implant groups displayed weight loss. In the CORT treated animals, there was also a positive relation between BI and FI, and higher FI when compared to groups 1 and 2. No effects of CORT were observed on feeding behaviour nor on the immune function.

Polyhydroxyalkanoates (PHAs) and its copolymer nanocarrier application in cancer treatment: An overview and challenges.

In the modern era, nanomedicine has developed novel drug-delivery strategies to improve chemotherapy. Nanotechnological-based treatment approaches for cancer through targeted tumour drug delivery and stimulus-responsive tumour microenvironment have gained tremendous success in oncology. The application of building block materials of these nanomedicines plays a vital role in cancer remediation. Despite successful application in various medical treatments, nanocarriers' lack of biodegradability and biocompatibility makes their use in a clinical context difficult. In addition, the preparation of current drug delivery systems is a major constraint. The current cancer treatment methods aim to destroy diseased tissue, frequently with the use of radiation and chemotherapy. These treatment options are accompanied by a significant level of toxicity, which has excellent potential to further medical issues in the afflicted patient. Polyhydroxyalkanoate (PHA) polymers are biodegradable and biocompatible polyesters that can potentially be used as nanoparticular delivery systems for cancer treatment. Previously, PHA has shown tremendous application as a packaging material in the food and pharma industry. PHA-based nanocarriers are an effective drug delivery system because of their non-immunogenicity, regulated drug release, high drug loading capacity, and targeted drug delivery. This review focuses on creating and using PHA-based nanocarriers in cancer treatment. Despite its many benefits, PHA-based nanocarriers have yet to progress to clinical trials for drug delivery applications due to several issues, including the polymers' hydrophobic nature and high production costs. This review examines these challenges along with existing alternatives.

Copolymers as a turning point for large scale polyhydroxyalkanoates applications.

Traditional plastics reshaped the society thanks to their brilliant properties and cut-price manufacturing costs. However, their protracted durability and limited recycling threaten the environment. Worthy alternatives seem to be polyhydroxyalkanoates, compostable biopolymers produced by several microbes. The most common 3-hydroxybutyrate homopolymer has limited applications calling for copolymers biosynthesis to enhance material properties. As a growing number of researches assess the discovery of novel comonomers, great endeavors are dedicated as well to copolymers production scale-up, where the choice of the microbial carbon source significantly affects the overall economic feasibility. Diving into novel metabolic pathways, engineered strains, and cutting-edge bioprocess strategies, this review aims to survey up-to-date publications about copolymers production, focusing primarily on precursors origins. Specifically, in the core of the review, copolymers precursors have been divided into three categories based on their economic value: the costliest structurally related ones, the structurally unrelated ones, and finally various low-cost waste streams. The combination of cheap biomasses, efficient pretreatment strategies, and robust microorganisms paths the way towards the development of versatile and circular polymers. Conceived to researchers and industries interested in tackling polyhydroxyalkanoates production, this review explores an angle often underestimated yet of prime importance: if PHAs copolymers offer advanced properties and sustainable end-of-life, the feedstock choice for their upstream becomes a major factor in the development of plastic substitutes.

Enhancing the efficacy of synthesising PHA from nitrogen-limited activated sludge using magnetic field.

Polyhydroxyalkanes (PHA) is a biodegradable biopolyester. In this study, we introduced the biological effects of magnetic field into a sequencing batch reactor (SBR) for PHA production to evaluate the effect of different strength of magnetic field on the efficacy of PHA synthesis by activated sludge and used the magnetic field to enhance the PHA synthesis capacity of nitrogen-limited activated sludge and to optimise the percentage of the content of the two monomers in PHA. The results showed that the magnetic field of appropriate strength was favourable to increase the production of PHA and to increase the percentage of PHV. In addition, microbial community analysis showed that there was an obvious succession of key functional bacteria under different strength of magnetic field. The highest PHA accumulation was achieved after the magnetic field of 16 mT, which reached 57.65% of the dry weight of sludge. In addition, the PHV monomers were more sensitive to the response of the magnetic field, and the magnetic field of 8mT and 16mT positively promoted the synthesis of PHV. It is worth noting that too high a magnetic field would have an inhibitory effect on the synthesis of PHA.

Dual-targeting liposomes modified with BTP-7 and pHA for combined delivery of TCPP and TMZ to enhance the anti-tumour effect in glioblastoma cells.

AIM: To construct a novel nano-carrier with dual ligands to achieve superior anti-tumour efficacy and lower toxic side effects. METHODS: Liposomes were prepared by thin film hydration method. Ultraviolet, high performance liquid chromatography, nano-size analyser, ultrafiltration centrifugation, dialysis, transmission electron microscope, flow cytometry, Cell Counting Kit-8, confocal laser scanning microscopy, transwell, and tumorsphere assay were used to study the characterisations, cytotoxicity, and in vitro targeting of dg-Bcan targeting peptide (BTP-7)/pHA-temozolomide (TMZ)/tetra(4-carboxyphenyl)porphyrin (TCPP)-Lip. RESULTS: BTP-7/pHA-TMZ/TCPP-Lip was a spheroid with a mean diameters of 143 ± 3.214 nm, a polydispersity index of 0.203 ± 0.025 and a surface charge of -22.8 ± 0.425 mV. The drug loadings (TMZ and TCPP) are 7.40 ± 0.23% and 2.05 ± 0.03% (mg/mg); and the encapsulation efficiencies are 81.43 ± 0.51% and 84.28 ± 1.64% (mg/mg). The results showed that BTP-7/pHA-TMZ/TCPP-Lip presented enhanced targeting and cytotoxicity. CONCLUSION: BTP-7/pHA-TMZ/TCPP-Lip can specifically target the tumour cells to achieve efficient drug delivery, and improve the anti-tumour efficacy and reduces the systemic toxicity.

PHB+aPHA Blends: From Polymer Bacterial Synthesis through Blend Preparation to Final Processing by Extrusion for Sustainable Materials Design.

The inherent brittleness of polyhydroxybutyrate (PHB), a well-studied polyhydroxyalkanoate (PHA), limits its applicability in flexible and impact-resistant applications. This study explores the potential of blending PHB with a different PHA to overcome brittleness. The synthesis of PHA polymers, including PHB and an amorphous medium-chain-length PHA (aPHA) consisting of various monomers, was achieved in previous works through canola oil fermentation. Detailed characterization of aPHA revealed its amorphous nature, as well as good thermal stability and shear thinning behavior. The blending process was carried out at different mass ratios of aPHA and PHB, and the resulting blends were studied by differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The blends exhibited complex DSC curves, indicating the presence of multiple crystalline forms of PHB. SEM images revealed the morphology of the blends, with PHB particles dispersed within the aPHA matrix. TGA showed similar thermal degradation patterns for the blends, with the residue content decreasing as the PHB content increased. The crystallinity of the blends was influenced by the PHB content, with higher PHB ratios resulting in an increased degree of crystallinity. XRD confirmed the presence of both α and ß crystals of PHB in the blends. Overall, the results demonstrate the potential of PHB+aPHA blends to enhance the mechanical properties of biopolymer materials, without com-promising the thermal stability, paving the way for sustainable material design and novel application areas.

Enhancing Pseudomonas cell growth for the production of medium-chain-length polyhydroxyalkanoates from Antarctic krill shell waste.

Antarctic krill shell waste (AKSW), a byproduct of Antarctic krill processing, has substantial quantity but low utilization. Utilizing microbial-based cell factories, with Pseudomonas putida as a promising candidate, offers an ecofriendly and sustainable approach to producing valuable bioproducts from renewable sources. However, the high fluoride content in AKSW impedes the cell growth of P. putida. This study aims to investigate the transcriptional response of P. putida to fluoride stress from AKSW and subsequently conduct genetic modification of the strain based on insights gained from transcriptomic analysis. Notably, the engineered strain KT+16840+03100 exhibited a remarkable 33.7-fold increase in cell growth, capable of fermenting AKSW for medium-chain-length-polyhydroxyalkanoates (mcl-PHA) biosynthesis, achieving a 40.3-fold increase in mcl-PHA yield compared to the control strain. This research advances our understanding of how P. putida responds to fluoride stress from AKSW and provides engineered strains that serve as excellent platforms for producing mcl-PHA through AKSW.