Relative humidity-dependent evolution of molecular composition of α-pinene secondary organic aerosol upon heterogeneous oxidation by hydroxyl radicals.

Heterogeneous oxidation by gas-phase oxidants is an important chemical transformation pathway of secondary organic aerosol (SOA) and plays an important role in controlling the abundance, properties, as well as climate and health impacts of aerosols. However, our knowledge on this heterogeneous chemistry remains inadequate. In this study, the heterogeneous oxidation of α-pinene ozonolysis SOA by hydroxyl (OH) radicals was investigated under both low and high relative humidity (RH) conditions, with an emphasis on the evolution of molecular composition of SOA and its RH dependence. It is found that the heterogeneous oxidation of SOA at an OH exposure level equivalent to 12 hr of atmospheric aging leads to particle mass loss of 60% at 25% RH and 95% at 90% RH. The heterogeneous oxidation strongly changes the molecular composition of SOA. The dimer-to-monomer signal ratios increase dramatically with rising OH exposure, in particular under high RH conditions, suggesting that aerosol water stimulates the reaction of monomers with OH radicals more than that of dimers. In addition, the typical SOA tracer compounds such as pinic acid, pinonic acid, hydroxy pinonic acid and dimer esters (e.g., C17H26O8 and C19H28O7) have lifetimes of several hours against heterogeneous OH oxidation under typical atmospheric conditions, which highlights the need for the consideration of their heterogeneous loss in the estimation of monoterpene SOA concentrations using tracer-based methods. Our study sheds lights on the heterogeneous oxidation chemistry of monoterpene SOA and would help to understand their evolution and impacts in the atmosphere.

On using an aerosol thermodynamic model to calculate aerosol acidity of coarse particles.

Thermodynamic modeling is still the most widely used method to characterize aerosol acidity, a critical physicochemical property of atmospheric aerosols. However, it remains unclear whether gas-aerosol partitioning should be incorporated when thermodynamic models are employed to estimate the acidity of coarse particles. In this work, field measurements were conducted at a coastal city in northern China across three seasons, and covered wide ranges of temperature, relative humidity and NH3 concentrations. We examined the performance of different modes of ISORROPIA-II (a widely used aerosol thermodynamic model) in estimating aerosol acidity of coarse and fine particles. The M0 mode, which incorporates gas-phase data and runs the model in the forward mode, provided reasonable estimation of aerosol acidity for coarse and fine particles. Compared to M0, the M1 mode, which runs the model in the forward mode but does not include gas-phase data, may capture the general trend of aerosol acidity but underestimates pH for both coarse and fine particles; M2, which runs the model in the reverse mode, results in large errors in estimated aerosol pH for both coarse and fine particles and should not be used for aerosol acidity calculations. However, M1 significantly underestimates liquid water contents for both fine and coarse particles, while M2 provides reliable estimation of liquid water contents. In summary, our work highlights the importance of incorporating gas-aerosol partitioning when estimating coarse particle acidity, and thus may help improve our understanding of acidity of coarse particles.

Effects of isoprene on the ozonolysis of Δ3-carene and ß-caryophyllene: Mechanisms of secondary organic aerosol formation and cross-dimerization.

Elucidating the mutual effects between the different volatile organic compounds (VOCs) is crucial for comprehending the formation mechanism of atmospheric secondary organic aerosols (SOA). Here, the mixed VOCs experiments of isoprene and Δ3-carene/ß-caryophyllene were carried out in the presence of O3 using an indoor smog chamber. The suppression effect of isoprene was recognized by the scanning mobility particle sizer spectrometer, online vacuum ultraviolet free electron laser (VUV-FEL) photoionization aerosol mass spectrometry, and quantum chemical calculations. The results indicate that the suppression effect of isoprene on the ozonolysis of Δ3-carene and ß-caryophyllene shows fluctuating and monotonous trends, respectively. The carbon content of the precursor could be the main factor for regulating the strength of the suppression effect. Plausible structures and formation mechanisms of several new products generated from the single VOC precursor and VOC-cross-reaction are proposed, which enrich the category of VOC oxidation products. Meanwhile, a new dimerization mechanism of the RO2 + R'O2 reaction is suggested, which offers an intriguing perspective on the gas phase formation process of particle phase accretion products. The present findings provide valuable insights into clarifying the pivotal roles played by isoprene in the interplay between different VOCs and understanding of SOA formation mechanisms of VOC mixtures, especially nearby the emission origins.

Metrological traceable calibration of organic carbon and elemental carbon based on laboratory-generated reference materials.

Carbonaceous aerosol, including organic carbon (OC) and elemental carbon (EC), has significant influence on human health, air quality and climate change. Accurate measurement of carbonaceous aerosol is essential to reduce the uncertainty of radiative forcing estimation and source apportionment. The accurate separation of OC and EC is controversial due to the charring of OC. Therefore, the development of reference materials (RM) for the validation of OC/EC separation is an important basis for further study. Previous RMs were mainly based on ambient air sampling, which could not provide traceability of OC and EC concentration. To develop traceable RMs with known OC/EC contents, our study applied an improved aerosol generation and mixing technique, providing uniform deposition of particles on quartz filters. To generate OC aerosol with similar pyrolytic property of ambient aerosol, both water soluble organic carbon (WSOC) and water insoluble organic carbon (WIOC) were used, and amorphous carbon was selected for EC surrogate. The RMs were analyzed using different protocols. The homogeneity within the filter was validated, reaching below 2%. The long-term stability of RMs has been validated with RSD ranged from 1.7%-3.2%. Good correlation was observed between nominal concentration of RMs with measured concentration by two protocols, while the difference of EC concentration was within 20%. The results indicated that the newly developed RMs were acceptable for the calibration of OC and EC, which could improve the accuracy of carbonaceous aerosol measurement. Moreover, the laboratory-generated EC-RMs could be suitable for the calibration of equivalent BC concentration by Aethalometers.

AVM: A Manually Curated Database of Aerosol-transmitted Virus Mutations, Human Diseases, and Drugs.

Aerosol-transmitted viruses possess strong infectivity and can spread over long distances, earning the difficult-to-control title. They cause various human diseases and pose serious threats to human health. Mutations can increase the transmissibility and virulence of the strains, reducing the protection provided by vaccines and weakening the efficacy of antiviral drugs. In this study, we established a manually curated database (termed AVM) to store information on aerosol-transmitted viral mutations (VMs). The current version of the AVM contains 42,041 VMs (including 2613 immune escape mutations), 45 clinical information datasets, and 407 drugs/antibodies/vaccines. Additionally, we recorded 88 human diseases associated with viruses and found that the same virus can target multiple organs in the body, leading to diverse diseases. Furthermore, the AVM database offers a straightforward user interface for browsing, retrieving, and downloading information. This database is a comprehensive resource that can provide timely and valuable information on the transmission, treatment, and diseases caused by aerosol-transmitted viruses (http://www.bio-bigdata.center/AVM).

An Exploration of Dissolution Tests for Inhalation Aerosols.

This study aimed to establish a feasible dissolution method for inhalation aerosols. A method of collecting fine particles was investigated to capture aerosol particles less than 4 µm in diameter for dissolution tests. This dose collection method enabled the aerosol particles to be uniformly distributed on the glass fiber filter, thus considerably reducing particle agglomeration. Budesonide was used as a model drug. The aerodynamic particle size distribution (APSD) of the meter-dose inhaler (MDI) was compared by replacing actuators with different orifice sizes. Dissolution tests were conducted on fine particle doses collected using various actuators, and the dissolution profiles were modeled. The fine particle dose decreased with an increasing orifice size of the actuator. Actuators with different orifice sizes would affect the dissolution behavior of inhaled drugs. This finding was supported by similarity factor f2 analysis, suggesting the dissolution method has a discriminative capacity. The results of various model fits showed that the dissolution profiles produced by the different actuators could be fitted well using the Weibull mathematical model. The method employed in this study could offer a potential avenue for exploring the relationship between the orifice size of the actuator and the dissolution behavior of inhaled corticosteroids. This dissolution method was simple, reproducible, and suitable for determining the dissolution of inhalation aerosols.

Mitigating aerosol-induced respiratory infections in home quarantine: The role of door dynamics and ventilation in residential design.

Respiratory infectious diseases, notably recurring waves of COVID-19 during autumn and winter, have significantly impacted global health and strained public health systems. Home isolation has emerged as a crucial and economical strategy to mitigate these impacts. This study investigates aerosol transmission and infection risks in home isolation environments using the Lattice Boltzmann Method with Large Eddy Simulation (LBM-LES). We focused on the impact of door operations and various natural ventilation rates on aerosol transmission and exposure risk in adjacent rooms. Our findings reveal that, without ventilation, aerosol leakage through door gaps poses a minimal infection risk to adjacent rooms, with an average probability of less than 2 × 10-5. However, with adequate ventilation, the infection risk for individuals in adjacent rooms for over 3 h can reach 60 %-70 %. Brief door movements have limited impact on infection risk (p ≤ 0.05, d ≤ 0.20), with aerosol leakage mainly occurring through door gaps rather than door movements. To reduce cross-infection during home isolation, we recommend avoiding prolonged stays near downwind walls facing the door. This research provides insights into aerosol dynamics in home isolation scenarios, offering theoretical guidance for designing safe isolation spaces and practical advice for healthy family members to minimize infection risk.

Aerosolic Application of Phages Against S. infantis on Plates and Chicken Skin.

Phages are known as a promising method to combat antimicrobial resistance (AMR) in the human and veterinary sector. Use of phage aerosols enormously increases the application field, although the impact on the infectivity of phages during nebulization needs to be evaluated. In this study S. infantis was treated on plates and chicken skin with nebulized phage particles of the Myoviridae type, identified by transmission electron microscopy, using a commercial nebulizer primarily used for H2O2 disinfection. The reduction of bacterial number by aerosol applied phage particles was evaluated. It could clearly be shown that the phage particles were able to infect Salmonella after being nebulized using ultrasound technology. Further studies on other types of phages as well as other conditions must be performed to standardize the aerosolic application of phages.

Stark seasonal contrast of fine aerosol levels, composition, formation mechanism, and characteristics in a polluted megacity.

In this study, we investigated the temporal variation of organic and inorganic aerosol with its optical properties in Mumbai (India), an urban coastal region. Mean PM2.5 concentrations during the sampling period were 175 µg/m3 (winter) and 90 µg/m3 (summer). During winter, the average concentrations of organic (OC), elemental (EC), and water-soluble organic carbon (WSOC) were three times higher than in summer. Secondary organic carbon (SOC) contribution in OC was higher in summer (78%) than in winter (53%), and strong solar radiation in summer likely caused this outcome. Aerosols were slightly acidic in both seasons, with an average pH of 5.7 (winter) and 6.0 (summer). A correlation was observed between SOC and the acidity of particles in summer (R2 = 0.6), indicating some amount of acid-catalysed SOC formation. In both seasons, the sulphate oxidation ratio (SOR) was higher than the nitrate oxidation ratio (NOR), which may reflect a preference for SO2 oxidation over NO2 or the difference in partitioning ammonium nitrate into ammonium sulphate under high RH. The dominant mechanism of SOC formation (gas vs aqueous phase oxidation) also showed seasonal variation. In winter, a relatively steep reduced major axis (RMA) slope of O3/CO suggests gas phase oxidation was the dominant mechanism of SOC production. Winter has more BrC fraction than summer, indicating higher absorbing aerosols, though the efficiency of absorbing the light was higher in summer. To assess the radiative forcing of PM2.5 on a local scale, an effective carbon ratio (ECR) was computed. The findings pointed to a local radiative heating impact caused by PM2.5. The spectral slope ratio and MAE at 250 to 300 nm ratio (E2/E3) revealed a higher abundance of high molecular weight species in WSOC during summer than in winter.

Creating respiratory pathogen-free environments in healthcare and nursing-care settings: a comprehensive review.

Hospital- and nursing-care-acquired infections are a growing problem worldwide, especially during epidemics, posing a significant threat to older adults in geriatric settings. Intense research during the COVID-19 pandemic highlighted the prominent role of aerosol transmission of pathogens. Aerosol particles can easily adsorb different airborne pathogens, carrying them for a long time. Understanding the dynamics of airborne pathogen transmission is essential for controlling the spread of many well-known pathogens, like the influenza virus, and emerging ones like SARS-CoV-2. Particles smaller than 50 to 100 µm remain airborne and significantly contribute to pathogen transmission. This review explores the journey of pathogen-carrying particles from formation in the airways, through airborne travel, to deposition in the lungs. The physicochemical properties of emitted particles depend on health status and emission modes, such as breathing, speaking, singing, coughing, sneezing, playing wind instruments, and medical interventions. After emission, sedimentation and evaporation primarily determine particle fate. Lung deposition of inhaled aerosol particles can be studied through in vivo, in vitro, or in silico methods. We discuss several numerical lung models, such as the Human Respiratory Tract Model, the LUng Dose Evaluation Program software (LUDEP), the Stochastic Lung Model, and the Computational Fluid Dynamics (CFD) techniques, and real-time or post-evaluation methods for detecting and characterizing these particles. Various air purification methods, particularly filtration, are reviewed for their effectiveness in healthcare settings. In the discussion, we analyze how this knowledge can help create environments with reduced PM2.5 and pathogen levels, enhancing safety in healthcare and nursing-care settings. This is particularly crucial for protecting older adults, who are more vulnerable to infections due to weaker immune systems and the higher prevalence of chronic conditions. By implementing effective airborne pathogen control measures, we can significantly improve health outcomes in geriatric settings.

Efficacy and safety of intraperitoneal chemotherapy for pancreatic cancer.

Pancreatic cancer is a highly aggressive cancer with unfavorable prognosis despite the therapeutic interventions. Intraperitoneal chemotherapy has recently shown potential outcomes in the presence of peritoneal metastases. However, a consensus is still lacking on different methods for intraperitoneal chemotherapy in pancreatic cancer. A variety of drugs and doses via three types of intraperitoneal chemotherapy have been studied. The prognosis and treatment strategies for pancreatic ductal adenocarcinoma (PDAC) will be significantly influenced by peritoneal dissemination and resectability of the macroscopic disease. Normothermic intraperitoneal chemotherapy (NIPEC) has been used for the treatment of peritoneal metastases of pancreatic carcinomas. Intraperitoneal chemotherapy is often combined with systemic therapies or surgical procedures which may lead to favorable combination therapies such as cytoreductive surgery and hyperthermic intraperitoneal chemotherapy (CRS/HIPEC). Pressurized intraperitoneal aerosol chemotherapy (PIPAC) is a relatively new approach that provides a homogenous and deep penetration of the chemotherapy into the peritoneum by producing aerosols. The present study aims to review the literature for recent evidence on intraperitoneal chemotherapy in pancreatic cancer.

Quantifying multi-virion aerosols in respiratory infection transmission.

Infectious aerosols are expired in various sizes, and the number of contained virions is expected to significantly vary among expired aerosols. To evaluate the effect of the number of contained virions on infection risk, multi-virion aerosols in expired air should be first quantified. In this study, we categorised expired aerosols into traditional aerosol size bins and aerosols containing different number of virions. We quantified the number of virions in aerosols of each size bin and estimated the size distribution of aerosols which contain a certain number of virions when the viral load is known. This analysis helped us to determine the relationship between multi-size aerosols and multi-virion aerosols. Our findings indicate that for long-range airborne transmission, the airborne transmission droplets derived from four COVID-19 outbreak venues contain at most one infectious virion, supporting the one-virion assumption for the considered viral load ranges. However, for short-range airborne transmission, the impact of multi-virion aerosols on infection risk must be considered. Our quantification of multi-virion aerosols for the first time lays the groundwork for incorporating the multi-virion assumption into infection risk assessments.

Exploring the use of ground-based remote sensing to identify new particle formation events: A case study in the Beijing area.

New Particle Formation (NPF) is an important process of secondary aerosol production in the atmosphere, which has significant impacts on the Earth's radiation balance, air quality, and climate change. In this study, we develop a method to identify NPF events based on ground-based remote sensing. We propose a proxy to characterize NPF events utilizing ground-based remote sensing of gaseous precursors and aerosol optical depth (AOD). This proxy is applied to identify the NPF events in Beijing in the winter of 2022 and tested by comparison with in-situ observations of aerosol particle number size distributions (PNSD) from SMPS. The comparison shows that the NPF events for regional nucleation can be identified effectively when the threshold for sulfur dioxide and organic gases (i.e. formaldehyde) are determined as 0.44 × 10-4 and 1.07 × 10-4. Based on these thresholds, the NPF events can be identified at a high percentage (84 %) compared with in-situ observations. The relationship between identification of NPF events and meteorological conditions shows that NPF events in Beijing winter occurred more frequently under weather conditions with north-west wind direction, high wind speed and low relative humidity.

A Novel System for Removing Examinee's Exhaled Air Using an Open, Lightweight Non-Sealing Facemask - a Proof-of-Concept Study.

Patients with respiratory infections (e.g., COVID-19, antimicrobial resistant bacteria) discharge pathogens to the environment, exposing healthcare workers and inpatients to deleterious complications. This study tested the performance of SPEAR-P1 (synchronized personal exhaled air removal system - prototype 1), which actively detects expiration and removes exhaled air using an open, non-sealing lightweight facemask connected to a deep vacuum generating unit (DVGU). Fourteen healthy examinees practiced breathing through facemasks at 30, 25 and 20 breaths per minute; oxygen and nebulized saline were added at later steps. To test the efficacy of removing exhaled air, CO2 was used as a proxy and its level was measured from the outer surface of the open facemask. Compared to the baseline recording, SPEAR-P1 reduced CO2 escaping from the facemask by 66% on average for all study steps and respiratory rates (p<0.001), reaching 85.55% on average at 20 breaths per minute (p<0.001). This study shows that removing exhaled air from examinees using an open, non-sealing lightweight facemask is feasible. Future development of this system will enhance its efficacy and provide a method to remove a patient's contaminating aerosol without the need to "seal" the patient, especially in settings where isolation rooms are not readily available.

Combined Quantification and Characterization of Dissolved Organic Matter by Liquid Chromatography-Mass Spectrometry Using Charged Aerosol Detection.

Dissolved organic matter (DOM) is a complex mixture of thousands of molecular formulas comprised of an unknown number of chemical compounds, the concentration and composition of which are critical to ecosystem function and biogeochemical cycling. Despite its importance, our understanding of the DOM composition is lacking. This is principally due to its molecular complexity, which means that no single method is capable of describing DOM in its entirety. Quantification is typically done by proxy (e.g., relative to carbon content) and does not necessarily match well to compositional data, due to incomplete analytical windows and selectivity of different analytical methods. We present an integrated liquid chromatography (LC)-diode array detector (DAD)-charged aerosol detector (CAD)-mass spectrometry (MS) pipeline designed to both characterize and quantify solid-phase extractable DOM (SPE-DOM) in a single analysis. We applied this method to a set of eight Swedish water bodies sampled in the summer and winter. Chromophoric SPE-DOM was proportionally higher in samples with higher SPE-DOM concentrations but remained relatively consistent between sampling occasions. Ionizable SPE-DOM was relatively consistent across sites but was proportionally higher in summer. Overall, the carbon content of DOM was very consistently ∼40% across sites in both summer and winter. These findings suggest that SPE-DOM concentration at these sites is driven by (presumably allochthonous) chromophoric inputs, with an increased relative contribution in summer of material that is more ionizable and less chromophoric and may be either autochthonous or selectively enriched from allochthonous sources. Thus, with minimal additional effort, this method provided further compositional insights not attained by any single analysis in isolation.

Fine-Scale Aerosol-Jet Printing of Luminescent Metal-Organic Framework Nanosheets.

Fabrication of metal-organic framework (MOF) thin films is an ongoing challenge to achieve effective device integration. Inkjet printing has been employed to print various luminescent metal-organic framework (MOF) films. Luminescent metal-organic nanosheets (LMONs), nanometer-thin particles of MOF materials with comparatively large micrometer lateral dimensions, provide an ideal morphology that offers enhancements over analogous MOFs in luminescent properties such as intensity and photoluminescent quantum yield. The morphology is also better suited to the formation of thin films. This work harnesses the preferential features of LMONs to access the advanced technique of aerosol-jet printing (AJP) to print luminescent films with precise geometries and patterns across the micrometer and centimeter length scales. AJP of LMONs exhibiting red (R), green (G), and blue (B) emission were studied systematically to reveal the increase of luminescence upon additive layering printing until a threshold was reached limited by self-quenching. By combining different LMON emitters, emission chromaticity and intensity were shown to be tunable, including the combination of RGB emitters to fabricate white-light-emitting films. A white-light LMON film was printed onto a UV light emitting diode (LED), producing a working white-light-emitting diode. Printing with multiple distinct photoluminescent inks produced intricate multicolor patterns that dynamically responded to excitation wavelength, acting either as micrometer-scale LED-type cells or larger visual tags. Collectively, the work offers an advancement for MOF thin films by printing MON materials using AJP, offering a precise method for manufacturing a wide range of critical functional devices, from luminescent sensors to optoelectronics, and more broadly even the opportunity for printed circuitry with conductive MONs.

Review of health effects driven by aerosol acidity: Occurrence and implications for air pollution control.

Acidity, generally expressed as pH, plays a crucial role in atmospheric processes and ecosystem evolution. Atmospheric acidic aerosol, triggering severe air pollution in the industrialization process (e.g., London Great Smoke in 1952), has detrimental effects on human health. Despite global endeavors to mitigate air pollution, the variations of aerosol acidity remain unclear and further restrict the knowledge of the acidity-driven toxicity of atmospheric fine particles (PM2.5). Here, we summarize the toxicological effects and mechanisms of inhalable acidic aerosol and its response to air pollution control. The acidity could adjust toxic components (e.g., metals, quinones, organic peroxides) bonded in aerosol and synergize with oxidant gaseous pollutants (e.g., O3, NO2) in epithelial lining fluid to induce oxidative stress and inflammation. The inhaled aerosol from the ambient air with higher acidity might elevate airway responsiveness and cause worse pulmonary dysfunction. Furthermore, historical observation data and model simulation indicate that PM2.5 can retain its acidic property despite considerable reductions in acidifying gaseous pollutants (e.g., SO2 and NOx) from anthropogenic emissions, suggesting its continuing adverse impacts on human health. The study highlights that aerosol acidity could partially offset the health benefits of emission reduction, suggesting that acidity-related health effects should be considered for future air pollution control policies.

Moving on from clinical animal-derived surfactants to peptide-based synthetic pulmonary surfactant.

Research on lung surfactant has exerted a great impact on newborn respiratory care and significantly improved survival and outcome of preterm infants with respiratory distress syndrome (RDS) due to surfactant deficiency because of lung immaturity. Current clinical, animal-derived, surfactants are among the most widely tested compounds in neonatology However, limited availability, high production costs, and ethical concerns about using animal-derived products constitute important limitations in their universal application. Synthetic lung surfactant offers a promising alternative to animal-derived surfactant by providing improved consistency, quality and purity, availability and scalability, ease of production and lower costs, acceptance, and safety for the treatment of neonatal RDS and other lung conditions. Third-generation synthetic surfactants built around surfactant protein B (SP-B) and C (SP-C) peptide mimics stand at the forefront of innovation in neonatal pulmonary medicine, while nasal continuous positive airway pressure (nCPAP) has become the standard non-invasive respiratory support for preterm infants. nCPAP can prevent the risk of chronic lung disease (bronchopulmonary dysplasia) and reduce lung injury by avoiding intubation and mechanical ventilation, is a relatively simple technique and can be initiated safely and effectively in the delivery room. Combining nCPAP with noninvasive, preferably aerosol, delivery of synthetic lung surfactant promises to improve respiratory outcomes for preterm infants, especially in low-and-middle income countries.

Molecular Insights into Gas-Particle Partitioning and Viscosity of Atmospheric Brown Carbon.

Biomass burning organic aerosol (BBOA), containing brown carbon chromophores, plays a critical role in atmospheric chemistry and climate forcing. However, the effects of evaporation on BBOA volatility and viscosity under different environmental conditions remain poorly understood. This study focuses on the molecular characterization of laboratory-generated BBOA proxies from wood pyrolysis emissions. The initial mixture, "pyrolysis oil (PO1)", was progressively evaporated to produce more concentrated mixtures (PO1.33, PO2, and PO3) with volume reduction factors of 1.33, 2, and 3, respectively. Chemical speciation and volatility were investigated using temperature-programmed desorption combined with direct analysis in real-time ionization and high-resolution mass spectrometry (TPD-DART-HRMS). This novel approach quantified saturation vapor pressures and enthalpies of individual species, enabling the construction of volatility basis set distributions and the quantification of gas-particle partitioning. Viscosity estimates, validated by poke-flow experiments, showed a significant increase with evaporation, slowing particle-phase diffusion and extending equilibration times. These findings suggest that highly viscous tar ball particles in aged biomass burning emissions form as semivolatile components evaporate. The study highlights the importance of evaporation processes in shaping BBOA properties, underscoring the need to incorporate these factors into atmospheric models for better predictions of BBOA aging and its environmental impact.

A mixed layer height parameterization in a 3-D chemical transport model: Implications for gas and aerosol simulations.

Vertical mixing within the planetary boundary layer (PBL) is crucial for determining surface-level pollutant concentrations. However, standard PBL schemes in chemical transport models (CTMs) often fail to adequately define the upper bounds of vertical mixing, particularly at night. This limitation frequently results in overestimated nocturnal concentrations of pollutants near the surface. To address this issue, we propose a parameterization of mixed layer height (MLH) derived from the Yonsei University (YSU) PBL scheme and thoroughly evaluate it by comparing simulations with various observations. We utilized the Weather Research and Forecasting model coupled with GEOS-Chem (WRF-GC) to simulate gas and aerosol distributions over South Korea during the Satellite Integrated Joint Monitoring of Air Quality (SIJAQ) campaign in 2021. The WRF-GC simulations incorporating the MLH parameterization improved the excessive titration of O3 and the overproduction of HNO3 and NO3- in the model. Consequently, the model performances in gaseous and aerosol simulations showed a better agreement with observations, with changes in normalized mean biases (NMBs) of NOX (from 50 % to -27 %), O3 (from -49 % to -28 %), NO3- (from 126 % to 91 %), NH4+ (from 113 % to 85 %), BC (from 322 % to 135 %), and PM2.5 (from 58 % to 28 %).