RESUMEN
Folded protein hydrogels are emerging as promising new materials for medicine and healthcare applications. Folded globular proteins can be modelled as colloids which exhibit site specific cross-linking for controlled network formation. However, folded proteins have inherent mechanical stability and unfolded in response to an applied force. It is not yet understood how colloidal network theory maps onto folded protein hydrogels and whether it models the impact of protein unfolding on network properties. To address this, we study a hybrid system which contains folded proteins (patchy colloids) and unfolded proteins (biopolymers). We use a model protein, bovine serum albumin (BSA), to explore network architecture and mechanics in folded protein hydrogels. We alter both the photo-chemical cross-linking reaction rate and the mechanical properties of the protein building block, via illumination intensity and redox removal of robust intra-protein covalent bonds, respectively. This dual approach, in conjunction with rheological and structural techniques, allows us to show that while reaction rate can 'fine-tune' the mechanical and structural properties of protein hydrogels, it is the force-lability of the protein which has the greatest impact on network architecture and rigidity. To understand these results, we consider a colloidal model which successfully describes the behaviour of the folded protein hydrogels but cannot account for the behaviour observed in force-labile hydrogels containing unfolded protein. Alternative models are needed which combine the properties of colloids (folded proteins) and biopolymers (unfolded proteins) in cross-linked networks. This work provides important insights into the accessible design space of folded protein hydrogels without the need for complex and costly protein engineering, aiding the development of protein-based biomaterials.
RESUMEN
Meniscus is vital for maintaining the anatomical and functional integrity of knee. Injuries to meniscus, commonly caused by trauma or degenerative processes, can result in knee joint dysfunction and secondary osteoarthritis, while current conservative and surgical interventions for meniscus injuries bear suboptimal outcomes. In the past decade, there has been a significant focus on advancing meniscus tissue engineering, encompassing isolated scaffold strategies, biological augmentation, physical stimulus, and meniscus organoids, to improve the prognosis of meniscus injuries. Despite noteworthy promising preclinical results, translational gaps and inconsistencies in the therapeutic efficiency between preclinical and clinical studies exist. This review comprehensively outlines the developments in meniscus tissue engineering over the past decade (Scheme 1). Reasons for the discordant results between preclinical and clinical trials, as well as potential strategies to expedite the translation of bench-to-bedside approaches are analyzed and discussed.
Asunto(s)
Menisco , Ingeniería de Tejidos , Andamios del Tejido , Ingeniería de Tejidos/métodos , Humanos , Animales , Andamios del Tejido/química , Investigación Biomédica TraslacionalRESUMEN
Hydrogels can improve the delivery of mesenchymal stromal cells (MSCs) by providing crucial biophysical cues that mimic the extracellular matrix. The differentiation of MSCs is dependent on biophysical cues like stiffness and viscoelasticity, yet conventional hydrogels cannot be dynamically altered after fabrication and implantation to actively direct differentiation. We developed a composite hydrogel, consisting of type I collagen and phase-shift emulsion, where osteogenic differentiation of MSCs can be non-invasively modulated using ultrasound. When exposed to ultrasound, the emulsion within the hydrogel was non-thermally vaporized into bubbles, which locally compacted and stiffened the collagen matrix surrounding each bubble. Bubble growth and matrix compaction were correlated, with collagen regions proximal (i.e., ≤ â¼60 µm) to the bubble displaying a 2.5-fold increase in Young's modulus compared to distal regions (i.e., > â¼60 µm). The viability and proliferation of MSCs, which were encapsulated within the composite hydrogel, were not impacted by bubble formation. In vitro and in vivo studies revealed encapsulated MSCs exhibited significantly elevated levels of RUNX2 and osteocalcin, markers of osteogenic differentiation, in collagen regions proximal to the bubble compared to distal regions. Additionally, alkaline phosphatase activity and calcium deposition were enhanced adjacent to the bubble. An opposite trend was observed for CD90, a marker of MSC stemness. Following subcutaneous implantation, bubbles persisted in the hydrogels for two weeks, which led to localized collagen alignment and increases in nuclear asymmetry. These results are a significant step toward controlling the 3D differentiation of MSCs in a non-invasive and on-demand manner.
RESUMEN
INTRODUCTION/OBJECTIVE: This study aimed to examine the effect of a human umbilical cord mesenchymal stem cell-derived exosome (hUC-MSC-Exo) liquid band-aid on wound healing in mice. METHODS: hUC-MSC-Exos were prepared from the supernatant via ion exchange chromatography. The composition ratio of the chitosan liquid band-aid was optimized to form a film and encapsulate hUC-MSC-Exo. The biological effects of chitosan exosome liquid band-aid on human umbilical vein endothelial cells (HUVECs) were observed, and its anti-bacterial properties were tested. BALB/c mice with back skin injury were randomly divided into chitosan exosome liquid band-aid group (CS-Exo), chitosan liquid band-aid group (CS), and normal saline control group (Con), and wound healing was evaluated post-treatment. Skin tissue samples posttreatment were collected for H&E staining. RESULTS: The hUC-MSC-Exo was prepared and characterized. The optimum conditions for film formation were 1% chitosan solution and 15% poloxamer 407/poloxamer 188 (pH 5.0 ~ 7.0). The chitosan exosome liquid band-aid promoted HUVEC proliferation and migration and markedly inhibited Escherichia coli and Staphylococcus aureus growth in vitro. In vivo, the wound healing rate in the CS-Exo group was higher than that in the Con and CS groups. Fourteen days post-treatment, the wounds completely healed, and hair grew normally, which was consistent with H&E results. Mouse weights in each group did not change significantly after administration, indicating that the chitosan exosome liquid band-aid had no obvious toxic side effects. CONCLUSION: Local chitosan exosome liquid band-aid application can promote wound healing in mice, and the mechanism could be related to hUC-MSC-Exo-induced vascular endothelial cell proliferation and migration.
RESUMEN
In recent years, hydrogels have found a special place in regenerative medicine for tissue repair, rehabilitation, and drug delivery. To be used in regenerative medicine, hydrogels must have desirable physical, chemical, and biological properties. In this study, a new biomonomer based on hydroxyethyl methacrylate-succinic acid-polyethylene glycol 200 (HEMA-Suc-PEG) was synthesized and characterized. Then, using the synthesized monomers and different ratios of polyethylene glycol diacrylate (PEGDA) as a crosslinker, biocompatible hydrogels were synthesized through thermal and UV curing methods. The mechanical, physical, chemical, and biological properties of the hydrogels and the behavior of endothelial cells, an essential component of the cardiovascular system, were evaluated. The results showed that the hydrogel synthesized with 0.2 g of PEGDA (UV curing) has desirable mechanical and physical properties. Biological tests showed that these hydrogels are not only nontoxic to cells but also enhance cell adhesion. Therefore, the hydrogel containing the synthesized monomer HEMA-Suc-PEG and 0.2 g of PEGDA has the potential to be used in the cardiovascular system.
RESUMEN
Craniofacial bone defects result from various disorders such as trauma, congenital malformations and infections. Cleft lip and palate are the most prevalent congenital craniofacial birth defect in humans. Growth factors (GFs) are soluble proteins secreted by cells that regulate various cellular processes and tissue regeneration. At present, developing three-dimensional scaffolds for delivering GFs to the site of injury has become an important aspect in craniofacial bone regeneration. This study aims to develop a novel 3D bone substitute using lyophilized-platelet-rich fibrin (LyPRF) biocomposite scaffolds for potential application for CLP repair. Collagen (C), bioglass (BG), and LyPRF were used to fabricate a biocomposite (C-BG-LyPRF) scaffold. The physical, chemical, and biocompatibility properties of the scaffold were evaluated. The C-BG-LyPRF scaffold demonstrated a mean pore diameter of 146 µm within a porosity of 87.26%. The FTIR spectra verified the presence of am-ide I, II, and III functional groups. The inorganic phase of the C-BG-LyPRF scaffold was composed of sodium, calcium, silicon, and phosphorus, as determined by EDX analysis. Furthermore, C-BG-LyPRF scaffold was biocompatible with MC3T3-E1 cells in both the Live/Dead and prolif-eration assays. Data demonstrate the developed C-BG-LyPRF scaffold exhibits biomimetic and biocompatibility properties, establishing it as a promising biomaterial for craniofacial regeneration.
Asunto(s)
Labio Leporino , Fisura del Paladar , Liofilización , Fibrina Rica en Plaquetas , Andamios del Tejido , Fisura del Paladar/cirugía , Labio Leporino/cirugía , Fibrina Rica en Plaquetas/química , Andamios del Tejido/química , Ratones , Animales , Humanos , Cerámica/química , Cerámica/farmacología , Ensayo de Materiales , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Línea Celular , Porosidad , Regeneración Ósea/efectos de los fármacos , Sustitutos de Huesos/química , Sustitutos de Huesos/farmacologíaRESUMEN
Bioassembly encompasses various techniques such as bioprinting, microfluidics, organoids, and self-assembly, enabling advances in tissue engineering and regenerative medicine. Advancements in bioassembly technologies have enabled the precise arrangement and integration of various cell types to more closely mimic the complexity functionality of the neurovascular unit (NVU) and that of other biodiverse multicellular tissue structures. In this context, bioprinting offers the ability to deposit cells in a spatially controlled manner, facilitating the construction of interconnected networks. Scaffold-based assembly strategies provide structural support and guidance cues for cell growth, enabling the formation of complex bio-constructs. Self-assembly approaches utilize the inherent properties of cells to drive the spontaneous organization and interaction of neuronal and vascular components. However, recreating the intricate microarchitecture and functional characteristics of a tissue/organ poses additional challenges. Advancements in bioassembly techniques and materials hold great promise for addressing these challenges. The further refinement of bioprinting technologies, such as improved resolution and the incorporation of multiple cell types, can enhance the accuracy and complexity of the biological constructs; however, developing bioinks that support the growth of cells, viability, and functionality while maintaining compatibility with the bioassembly process remains an unmet need in the field, and further advancements in the design of bioactive and biodegradable scaffolds will aid in controlling cell adhesion, differentiation, and vascularization within the engineered tissue. Additionally, integrating advanced imaging and analytical techniques can provide real-time monitoring and characterization of bioassembly, aiding in quality control and optimization. While challenges remain, ongoing research and technological advancements propel the field forward, paving the way for transformative developments in neurovascular research and tissue engineering. This work provides an overview of the advancements, challenges, and future perspectives in bioassembly for fabricating neurovascular constructs with an add-on focus on bioprinting technologies.
Asunto(s)
Bioimpresión , Impresión Tridimensional , Ingeniería de Tejidos , Andamios del Tejido , Bioimpresión/métodos , Humanos , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Medicina Regenerativa/métodos , Neuronas/citología , Neuronas/metabolismoRESUMEN
Orofacial clefts are the most common congenital craniofacial anomaly. Adverse healing following cleft palate repair can lead to oronasal fistula (ONF), a persistent connection between the oral and nasal cavities. Although human allograft tissues are currently the gold standard for ONF repair, these methods carry risks of infection and rejection, often requiring surgical revision. Immunoregenerative therapies present a novel alternative approach to harness the body's immune response and enhance the wound healing environment. An FDA-approved immunomodulatory drug, FTY720, is repurposed to reduce lymphocyte egress and induce immune cell fate switching toward pro-regenerative phenotypes. In this study, a bilayer biomaterial system is engineered using Tegaderm to secure and control the delivery of FTY720-nanofiber scaffolds (FTY720-NF). The release kinetics of the bilayer FTY720-NF is optimized to maintain drug release for up to 7 days, ensuring safe transdermal absorption and tissue biodistribution. The comprehensive immunophenotyping results demonstrate a regenerative state transition in hybrid immune cells recruited to the wound site. Further, histological evaluations reveal a significant ONF closure in mice by day 7 following bilayer FTY720-NF implantation. These findings demonstrate the utility of immunomodulatory strategies for oral wound healing, better positing the field to develop more efficacious treatment options in pediatric patients.
RESUMEN
BACKGROUND: Spinal cord injury (SCI) is a severe traumatic spinal condition with a poor prognosis. In this study, a scaffold called linearly ordered collagen aggregates (LOCAS) was created and loaded with induced pluripotent stem cells (iPSCs)-derived neural stem cells (NSCs) from human umbilical cord blood derived mesenchymal stem cells (hUCB-MSCs) to treat SCI in a rat model. METHODS: The rats underwent a complete transection SCI resulting in a 3-mm break at either the T9 or T10 level of the spinal cord. RESULTS: Scanning electron microscope analysis revealed a uniform pore structure on the coronal plane of the scaffold. The LOCAS had a porosity of 88.52% and a water absorption of 1161.67%. Its compressive modulus and stress were measured at 4.1 MPa and 205 kPa, respectively, with a degradation time of 10 weeks. After 12 weeks, rats in the LOCAS-iPSCs-NSCs group exhibited significantly higher BBB scores (8.6) compared to the LOCAS-iPSCs-NSCs group (5.6) and the Model group (4.2). The CatWalk analysis showed improved motion trajectory, regularity index (RI), and swing speed in the LOCAS-iPSCs-NSCs group compared to the other groups. Motor evoked potentials latency was lower and amplitude was higher in the LOCAS-iPSCs-NSCs group, indicating better neural function recovery. Histological analysis demonstrated enhanced neuronal differentiation of NSCs and nerve fiber regeneration promoted by LOCAS-iPSCs-NSCs, leading to improved motor function recovery in rats. The LOCAS scaffold facilitated ordered neurofilament extension and guided nerve regeneration. CONCLUSIONS: The combination of LOCAS and iPSCs-NSCs demonstrated a positive therapeutic impact on motor function recovery and tissue repair in rats with SCI. This development offers a more resilient bionic microenvironment and presents novel possibilities for clinical SCI repair.
Asunto(s)
Células Madre Pluripotentes Inducidas , Regeneración Nerviosa , Células-Madre Neurales , Recuperación de la Función , Traumatismos de la Médula Espinal , Animales , Regeneración Nerviosa/fisiología , Ratas , Traumatismos de la Médula Espinal/terapia , Traumatismos de la Médula Espinal/fisiopatología , Traumatismos de la Médula Espinal/patología , Células Madre Pluripotentes Inducidas/metabolismo , Células Madre Pluripotentes Inducidas/citología , Células-Madre Neurales/citología , Células-Madre Neurales/metabolismo , Humanos , Andamios del Tejido/química , Ratas Sprague-Dawley , Colágeno/metabolismo , Células Madre Mesenquimatosas/metabolismo , Células Madre Mesenquimatosas/citología , Femenino , Diferenciación CelularRESUMEN
Obesity is a global health crisis characterised by excessive accumulation of adipose tissue (AT). Under obesogenic conditions, this metabolically active tissue undergoes fibrosis and inflammation, leading to obesity-linked comorbidities. Modelling AT is essential for understanding its pathophysiology and developing treatments to protect against metabolic complications. 3D in vitro AT models are promising tools that address the limitations of traditional 2D in vitro models and in vivo animal models, providing enhanced biomimetic and human-relevant platforms. 3D models facilitate the study of AT pathophysiology and therapeutic screening. This review discusses the crucial role of AT in obesity-linked comorbidities, its dynamicity and complexity, and recent advances in engineering 3D scaffold-based in vitro dysfunctional AT models, highlighting potential breakthroughs in metabolic research and beyond.
RESUMEN
The study addresses the challenge of temperature sensitivity in pristine gelatin hydrogels, widely used in biomedical applications due to their biocompatibility, low cost, and cell adhesion properties. Traditional gelatin hydrogels dissolve at physiological temperatures, limiting their utility. Here, we introduce a novel method for creating stable hydrogels at 37 °C using pristine gelatin through photopolymerization without requiring chemical modifications. This approach enhances consistency and simplifies production and functionalization of the gelatin with bioactive molecules. The stabilization mechanism involves the partial retention of the triple-helix structure of gelatin below 25 °C, which provides specific crosslinking sites. Upon activation by visible light, ruthenium (Ru) acts as a photosensitizer that generates sulphate radicals from sodium persulphate (SPS), inducing covalent bonding between tyrosine residues and "locking" the triple-helix conformation. The primary focus of this work is the characterization of the mechanical properties, swelling ratio, and biocompatibility of the photopolymerized gelatin hydrogels. Notably, these hydrogels supported better cell viability and elongation in normal human dermal fibroblasts (NHDFs) compared to GelMA, and similar performance was observed for human pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). As a proof of concept for functionalization, gelatin was modified with selenous acid (GelSe), which demonstrated antioxidant and antimicrobial capacities, particularly against E. coli and S. aureus. These results suggest that pristine gelatin hydrogels, enhanced through this new photopolymerization method and functionalized with bioactive molecules, hold potential for advancing regenerative medicine and tissue engineering by providing robust, biocompatible scaffolds for cell culture and therapeutic applications.
RESUMEN
The most common technologies in tissue engineering include growth factor therapies; metal implants, such as titanium; 3D bioprinting; nanoimprinting for ceramic/polymer scaffolds; and cell therapies, such as mesenchymal stem cells (MSCs). Cell therapy is a promising alternative to organ grafts and transplants in the treatment of numerous musculoskeletal diseases. MSCs have increasingly been used in generative medicine due to their specialized self-renewal, immunomodulation, multiplication, and differentiation properties. To further expand the potential of these cells in tissue repair, significant efforts are currently dedicated to the production of biomaterials with desirable short- and long-term biophysical properties that can aid the differentiation and expansion of MSCs. Biomaterials support MSC differentiation by modulating their characteristics, such as composition, mechanical properties, porosity, and topography. This review aimed to describe recent MSC approaches, including those associated with biomaterials, from experimental, clinical, and preclinical studies with sheep models.
RESUMEN
Hydrogels have garnered significant attention for their versatile applications across various fields, including biomedical engineering. This review delves into the fundamentals of hydrogels, exploring their definition, properties, and classification. Hydrogels, as three-dimensional networks of crosslinked polymers, possess tunable properties such as biocompatibility, mechanical strength, and hydrophilicity, making them ideal for medical applications. Uniquely, this article offers original insights into the application of hydrogels specifically for corneal tissue engineering, bridging a gap in current research. The review further examines the anatomical and functional complexities of the cornea, highlighting the challenges associated with corneal pathologies and the current reliance on donor corneas for transplantation. Considering the global shortage of donor corneas, this review discusses the potential of hydrogel-based materials in corneal tissue engineering. Emphasis is placed on the synthesis processes, including physical and chemical crosslinking, and the integration of bioactive molecules. Stimuli-responsive hydrogels, which react to environmental triggers, are identified as promising tools for drug delivery and tissue repair. Additionally, clinical applications of hydrogels in corneal pathologies are explored, showcasing their efficacy in various trials. Finally, the review addresses the challenges of regulatory approval and the need for further research to fully realize the potential of hydrogels in corneal tissue engineering, offering a promising outlook for future developments in this field.
RESUMEN
Wound healing is a complex and precisely regulated process that encompasses multiple stages, including inflammation, anti-inflammation, and tissue repair. It involves various cells and signaling molecules, with macrophages demonstrating a significant degree of plasticity and playing a crucial regulatory role at different stages. In recent years, the use of biomaterials, which include both natural and synthetic polymers or macromolecules, has proliferated for the purpose of enhancing wound healing. This review summarizes how these diverse biomaterials promote wound healing by modulating macrophage behavior and examines the broader implications of these modulations. Additionally, we discuss the limitations associated with the clinical application of immunomodulatory biomaterials and propose potential solutions. Finally, we look towards future developments in the design of immunomodulatory biomaterials intended to enhance wound healing.
RESUMEN
Nanocellulose is considered a promising and sustainable biomaterial, with excellent properties of biorenewability with improved mechanical properties. As a unique natural biopolymer, it has been applied to many different industries, where efficient and environmentally friendly productions are in demand. For the first time, ferns from the class Polypodiopsida were used for the isolation of cellulose fibers, which was performed using a chemo-mechanical method. As chemical treatment plays a crucial role in the isolation of nanocellulose, it affects the efficiency of the extraction process, as well as the properties of the resulting nanocellulose. Therefore, mechanical fibrillation was performed via grinding, while the chemical process consisted of three different treatments: alkali treatment, bleaching, and acid hydrolysis. In three different experiments, each treatment was separately prolonged to investigate the differing properties of isolated nanocellulose. Structural analysis and morphological analysis were investigated by SEM, EDS, FT-IR, and DLS. The thermal stability of cellulose fibers was investigated by TGA/DSC. The morphology of obtained nanocellulose was confirmed via SEM analysis for all samples, with particles ranging from 20 nm up to 600 nm, while the most consistent sizes were observed for NC3, ranging from 20 to 60 nm. FT-IR spectra showed prominent absorption peaks corresponding to cellulose, as well as the absence of absorption peaks, corresponding to lignin and hemicellulose. The EDS confirmed the elemental purity of nanocellulose, while TGA/DSC indicated higher thermal stability of nanocellulose, compared to untreated fern, which started to degrade earlier than nanocellulose. Such characteristics with unique properties make nanocellulose a versatile biomaterial for the industrial production of cellulosic materials.
RESUMEN
Gold nanoparticles (AuNPs) have gained significant attention in the biomedical field owing to their versatile properties. AuNPs can be customized by modifying their size, shape and surface characteristics. In recent years, extensive research has explored the integration of AuNPs into various dental materials, including titanium, polymethylmethacrylate (PMMA) and resin composites. This review aims to summarize the advancements in the application of modified AuNPs in dental materials and to assess their effects on related cellular processes in the dental field. Relevant articles published in English on AuNPs in association with dental materials were identified through a systematic search of the PubMed/MEDLINE, Embase, Scopus and ScienceDirect databases from January 2014 to April 2024. Future prospects for the utilization of AuNPs in the field of dentistry are surveyed.
RESUMEN
Smart radiotherapy biomaterials (SRBs) include seed and liquid biomaterials designed to be employed as fiducial markers during radiotherapy while also delivering therapeutic drug payloads to enhance treatment outcomes. In this study, we investigate a novel Customizable Lyophilized Agent for Radiotherapy Imaging and TherapY (CLARITY) biomaterial, which can be loaded with immunoadjuvants (anti-CD40 monoclonal antibody or Caflanone (FBL-03G)) at the point of care. The CLARITY biomaterial was investigated in an animal model of pancreatic cancer using C57BL6 mice. Mice were imaged before and at different points of time post-treatment to evaluate the potential of CLARITY biomaterial to provide imaging contrast similar to fiducials. This study also used cadavers to assess CLARITY's potential to provide imaging contrast in humans. Results showed imaging contrast from computed tomography (CT) and magnetic resonance imaging (MRI) modalities for up to 30 days post-treatment, demonstrating potential for use as fiducials. A significant increase in survival (***, p = 0.0006) was observed for mice treated with CLARITY biomaterial loaded with immunoadjuvant for up to 10 weeks post-treatment compared to those without treatment. These initial results demonstrate the potential of CLARITY biomaterial to serve as a smart multifunctional radiotherapy biomaterial and provide the impetus for further development and optimization as a point-of-care technology for combination radiotherapy and immunotherapy.
RESUMEN
BACKGROUND: Skin injury affects the integrity of the skin structure and induces the wound healing process, which is defined by a well-coordinated series of cellular and molecular reactions that aim to recover or replace the injured tissue. Hydrogels are a group of promising biomaterials that are able to incorporate active ingredients for use as dressings. This study aimed to synthesize hydrogels with and without propolis extract and evaluate their physical characteristics and biological activities in vitro for potential use as active dressings in the treatment of skin lesions. METHODS: The antifungal [Candida albicans (C. albicans) and Candida tropicalis (C. tropicalis)] and antibacterial [Staphylococcus aureus (S. aureus), Pseudomonas aeruginosas (P. aeruginosas) and Escherichia coli (E. coli)] activity was assessed by the microdilution method in plates and antioxidant potential by the reduction of the phosphomolybdate complex. RESULTS: The hydrogels showed good water absorption capacity, high solubility, and high gel fraction, as well as good porosity, water retention, and vapor transmission rates. They revealed a totally amorphous structure. The extract and the hydrogels containing the propolis extract (1.0% and 2.5%) did not inhibit fungal growth. However, they showed antibacterial activity against strains of S. aureus and P. aeruginosas. Regarding the E. coli strain, only the extract inhibited its growth. It showed good antioxidant activity by the evaluation method used. CONCLUSIONS: Therefore, the hydrogels containing propolis extract can be a promising alternative with antibacterial and antioxidant action for use as dressings for the treatment of skin lesions.
RESUMEN
Magnesium and its alloys, valued for their lightweight and durable characteristics, have garnered increasing attention for biomedical applications due to their exceptional biocompatibility and biodegradability. This work introduces a comparison of advanced and basic methods-laser texturing and sandblasting-on magnesium surfaces to enhance bioactivity for biomedical applications. Employing a comprehensive analysis spanning surface morphology, hardness, wettability, tribological performance, and corrosion behavior, this study elucidates the intricate relationship between varied surface treatments and magnesium's performance. Findings reveal that both laser texturing and sandblasting induce grain refinement. Notably, sandblasting, particularly with a duration of 2 s, demonstrates superior wear resistance and reduced corrosion rates compared to untreated magnesium, thereby emerging as a promising approach for enhancing magnesium bioactivity in biomedical contexts. This investigation contributes to a deeper understanding of the nuanced interactions between diverse surface treatments and their implications for magnesium implants in chloride-rich environments, offering valuable insights for prospective biomedical applications.
RESUMEN
Advances in imaging technologies combined with artificial intelligence (AI) are transforming dental, oral, and craniofacial research. This editorial highlights breakthroughs ranging from gene expression mapping to visualizing the availability of global AI data, providing new insights into biological complexity and clinical applications.