Harnessing nanomaterials for copper-induced cell death.

Copper (Cu), an essential micronutrient with redox properties, plays a pivotal role in a wide array of pathological and physiological processes across virtually all cell types. Maintaining an optimal copper concentration is critical for cellular survival: insufficient copper levels disrupt respiration and metabolism, while excess copper compromises cell viability, potentially leading to cell death. Similarly, in the context of cancer, copper exhibits a dual role: appropriate amount of copper can promote tumor progression and be an accomplice, yet beyond befitting level, copper can bring about multiple types of cell death, including autophagy, apoptosis, ferroptosis, immunogenic cell death, pyroptosis, and cuproptosis. These forms of cell death are beneficial against cancer progression; however, achieving precise copper regulation within tumors remains a significant challenge in the pursuit of effective cancer therapies. The emergence of nanodrug delivery systems, distinguished by their precise targeting, controlled release, high payload capacity, and the ability to co-deliver multiple agents, has revitalized interest in exploiting copper's precise regulatory capabilities. Nevertheless, there remains a dearth of comprehensive review of copper's bidirectional effects on tumorigenesis and the role of copper-based nanomaterials in modulating tumor progression. This paper aims to address this gap by elucidating the complex role in cancer biology and highlighting its potential as a therapeutic target. Through an exploration of copper's dualistic nature and the application of nanotechnology, this review seeks to offer novel insights and guide future research in advancing cancer treatment.

Alkyl effects on charge recombination in copper electrolyte-based dye-sensitized solar cells: Insights for targeted molecular design towards high performance.

Two quinoxaline dyes utilized in copper-electrolyte-based dye-sensitized solar cells (Cu-DSSCs) are theoretically investigated to analyze the impact of alkyl chains on dye performance. The investigation shows that ZS4, known for its record efficiency of up to 13.2 %, exhibits higher electron coupling and fewer binding sites for dye-[Cu(tmby)2]2+ interaction compared to ZS5. Contrary to common belief, alkyl chains are found to not only provide shielding but also hinder the interaction between dye and [Cu(tmby)2]2+ by influencing the optimal conformation of dyes, thereby impeding the charge recombination process. It is crucial to consider the influence of alkyl chains on dye conformation when discussing the relationship between dye structure and performance, rather than oversimplifying it as often done traditionally. Building on these findings, eight dyes are strategically designed by adjusting the position of the alkyl chain to further decrease charge recombination compared to ZS4. Theoretical evaluation of these dyes reveals that changing the alkyl chain on the nitrogen atom from 2-ethylhexyl (ZS4) to 1-hexylheptyl (D3-2) not only reduces the charge recombination rate but also enhances light harvesting ability. Therefore, D3-2 shows potential as a candidate for experimental synthesis of high-performance Cu-DSSCs with improved efficiency.

Insight into catalytic performance and reaction mechanism for toluene total oxidation over Cu-Ce supported catalyst.

Herein, three supported catalysts, CuO/Al2O3, CeO2/Al2O3, and CuO-CeO2/Al2O3, were synthesized by the convenient impregnation method to reveal the effect of CeO2 addition on catalytic performance and reaction mechanism for toluene oxidation. Compared with CuO/Al2O3, the T50 and T90 (the temperatures at 50% and 90% toluene conversion, respectively) of CuO-CeO2/Al2O3 were reduced by 33 and 39 °C, respectively. N2 adsorption-desorption experiment, XRD, SEM, EDS mapping, Raman, EPR, H2-TPR, O2-TPD, XPS, NH3-TPD, Toluene-TPD, and in-situ DRIFTS were conducted to characterize these catalysts. The excellent catalytic performance of CuO-CeO2/Al2O3 could be attributed to its strong copper-cerium interaction and high oxygen vacancies concentration. Moreover, in-situ DRIFTS proved that CuO-CeO2/Al2O3 promoted the conversion of toluene to benzoate and accelerated the deep degradation path of toluene. This work provided valuable insights into the development of efficient and economical catalysts for volatile organic compounds.

Carbon/copper oxide electrode materials with high atomic utilization constructed by in-situ induced growth strategy of nano metal-organic frameworks.

Carbon/metal composites derived from metal-organic frameworks (MOFs) have attracted widespread attention due to their excellent electronic conductivity, adjustable porosity, and outstanding stability. However, traditional synthesis methods are limited by the dense stereo geometry and large crystal grain size of MOFs, resulting in many metals active sites are buried in the carbon matrix. While the common strategy involves incorporating additional dispersed media into material, this leads to a decrease in practical metal content. In this study, nanosized copper-metal-organic frameworks (Cu-MOFs) are in-situ grown on surface of carbon spheres by pre-anchoring copper ions, and the hybrid composite of porous carbon/copper oxide with high copper atom utilization rate is prepared through activation and pyrolysis methods. This strategy effectively addresses the issue of insufficient exposure of metal sites, and the obtained composite material exhibits high effective copper atom utilization rate, large specific surface area (2052.3 m2·g-1), diverse pore structure, outstanding specific capacity (1076.5F·g-1 at 0.5 A·g-1), and excellent cycle stability. Furthermore, this highly atom-economical universal method has positive significance in application fields of catalysis, energy storage, and adsorption.

Construction of porous Cu/CeO2 catalyst with abundant interfacial sites for effective methanol steam reforming.

Methanol is a promising hydrogen carrier for fuel cell vehicles (FCVs) via methanol steam reforming (MSR) reaction. Ceria supported copper catalyst has attracted extensive attentions due to the extraordinary oxygen storage capacity and abundant oxygen vacancies. Herein, we developed a colloidal solution combustion (CSC) method to synthesize a porous Cu/CeO2(CSC) catalyst. Compared with Cu/CeO2 catalysts prepared by other methods, the Cu/CeO2(CSC) catalyst possesses highly dispersed copper species and abundant Cu+-Ov-Ce3+ sites at the copper-ceria interface, contributing to methanol conversion of 66.3 %, CO2 selectivity of 99.2 %, and outstanding hydrogen production rate of 490 mmol gcat-1 h-1 under 250 °C. The linear correlation between TOF values and Cu+-Ov-Ce3+ sites amount indicates the vital role of Cu+-Ov-Ce3+ sites in MSR reaction, presenting efficient ability in activation of water. Subsequently, a deep understanding of CSC method is further presented. In addition to serving as a hard template, the colloidal silica also acts as disperser between nanoparticles, enhancing the copper-ceria interactions and facilitating the generation of Cu+-Ov-Ce3+ sites. This study offers an alternative approach to synthesize highly dispersed supported copper catalysts.

Cu/TiO2 adsorbents modified by air plasma for adsorption-oxidation of H2S.

In this study, non-thermal plasma (NTP) was employed to modify the Cu/TiO2 adsorbent to efficiently purify H2S in low-temperature and micro-oxygen environments. The effects of Cu loading amounts and atmospheres of NTP treatment on the adsorption-oxidation performance of the adsorbents were investigated. The NTP modification successfully boosted the H2S removal capacity to varying degrees, and the optimized adsorbent treated by air plasma (Cu/TiO2-Air) attained the best H2S breakthrough capacity of 113.29 mg H2S/gadsorbent, which was almost 5 times higher than that of the adsorbent without NTP modification. Further studies demonstrated that the superior performance of Cu/TiO2-Air was attributed to increased mesoporous volume, more exposure of active sites (CuO) and functional groups (amino groups and hydroxyl groups), enhanced Ti-O-Cu interaction, and the favorable ratio of active oxygen species. Additionally, the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results indicated the main reason for the deactivation was the consumption of the active components (CuO) and the agglomeration of reaction products (CuS and SO42-) occupying the active sites on the surface and the inner pores of the adsorbents.

Developing an off-on fluorescence sensor based on red copper nanoclusters wrapped by sulfhydryl and polymer double ligands for sensitive detection of N-acetyl-L-cysteine.

N-acetyl-L-cysteine (NAC) as a class of thiols is commonly used in the treatment of lung diseases, detoxification and prevention of liver damage. In this paper, 4-mercaptobenzoic acid (4-MBA) coated and polyvinylpyrrolidone (PVP) attached copper nanoclusters (4-MBA@PVP-CuNCs) were successfully synthesized using a simple one-pot method with an absolute quantum yield of 10.98 %, and its synthetic conditions (like effects of single/double ligands and temperature) were studied intensively. Then Hg2+ could quench the fluorescence of the 4-MBA@PVP-CuNCs and its fluorescence was restored with the addition of NAC. Based on the above principles, an off-on switching system was established to detect NAC. That is, the 4-MBA@PVP-CuNCs-Hg probe was prepared by adding Hg2+ to switch off the fluorescence of the CuNCs by static quenching, and then NAC was added to switch on the fluorescence of the probe based on the chelation of NAC and Hg2+. Moreover, the effects of metal ion types and mercury ion doses for the probe construction were also further discussed. The method showed excellent linearity in the range of 0.05-1.25 µM and low detection limit of 16 nM. Meanwhile, good recoveries in real urine, tablets and pellets were observed, which proved the reliability of the method and provided a convenient, fast and sensitive method for NAC detection.

Efficiently directing differentiation and homing of mesenchymal stem cells to boost cartilage repair in osteoarthritis via a nanoparticle and peptide dual-engineering strategy.

Mesenchymal stem cells (MSCs) are expected to be useful therapeutics in osteoarthritis (OA), the most common joint disorder characterized by cartilage degradation. However, evidence is limited with regard to cartilage repair in clinical trials because of the uncontrolled differentiation and weak cartilage-targeting ability of MSCs after injection. To overcome these drawbacks, here we synthesized CuO@MSN nanoparticles (NPs) to deliver Sox9 plasmid DNA (favoring chondrogenesis) and recombinant protein Bmp7 (inhibiting hypertrophy). After taking up CuO@MSN/Sox9/Bmp7 (CSB NPs), the expressions of chondrogenic markers were enhanced while hypertrophic markers were decreased in response to these CSB-engineered MSCs. Moreover, a cartilage-targeted peptide (designated as peptide W) was conjugated onto the surface of MSCs via a click chemistry reaction, thereby prolonging the residence time of MSCs in both the knee joint cavity of mice and human-derived cartilage. In a surgery-induced OA mouse model, the NP and peptide dual-modified W-CSB-MSCs showed an enhancing therapeutic effect on cartilage repair in knee joints compared with other engineered MSCs after intra-articular injection. Most importantly, W-CSB-MSCs accelerated cartilage regeneration in damaged cartilage explants derived from OA patients. Thus, this new peptide and NPs dual engineering strategy shows potential for clinical applications to boost cartilage repair in OA using MSC therapy.

Integrated Design of Homogeneous/Heterogeneous Copper Complex Catalysts to Enable Synergistic Effects on Sulfur and Lithium Evolution Reactions.

Fatal polysulfide shuttling, sluggish sulfur redox kinetics and detrimental lithium dendrites have curtailed the real discharge capacity, working lifespan and safety of lithium-sulfur (Li-S) batteries. Organic small molecule promotors as one type of emerging active catalysts can fulfil the management of the electrochemical species evolution behaviors. Herein, an integrated engineering is organized by synthesizing dual chlorine-bridge enabled binuclear copper complex (Cu2(phen)2Cl2) and its derivative generated in electrolyte (Cu-ETL) as the heterogeneous and homogeneous catalyst, respectively. The well-designed Cu-ETL with a optimized concentration of 0.25 wt.% as a homogeneous enabler offers highly utilized Cu centers and the sufficient interface contact for guiding the Li2S nucleation/decomposition reactions. The Cu2(phen)2Cl2 loaded on carbon spheres as an interlayer (Cu-INT) can break through the catalytic limitation resulting from the saturated concentration of Cu-ETL and thus offers an extended manipulation effect. Benefiting from the synergistic effect, the Li-S battery shows stable cycling at 3 C upon 500 cycles with a capacity degradation rate as low as 0.029% per cycle. Of specific note, an actual cell energy density of 372.1 Wh kg-1 is harvested by a 1.2 Ah-level soft-packaged pouch cell, implying a chance for requiring the demand of high-energy batteries.

Polypeptide-Based Copper Ionophore for In Situ Glutathione-Triggered Chemodynamic and Chemotherapy.

Intracellular copper ion homeostasis has become an attractive target for cancer therapy. Herein, we report a 2,2'-dipicolylamine (DPA) functionalized polyglutamate derivative (PDHB) which is capable of rapidly forming PDHB-copper complex (PDHB@Cu) due to the strong coordination ability of pendant DPA with Cu2+. High drug loading content of doxorubicin (DOX) (>30 wt %) is realized due to the strong affinity of Cu2+ to DOX, while that is about 10 wt % for PDHB without Cu2+. The obtained PDHB@Cu-DOX can respond to specific endogenous stimuli (pH and glutathione (GSH)), releasing Cu2+ and DOX. The released DOX directly damages the DNA of tumor cells to cause apoptosis, while Cu2+ depletes intracellular GSH and is reduced to Cu+ simultaneously, which reacts with local H2O2 to produce highly toxic ·OH via a Fenton-like reaction, thus realizing synergistic chemodynamics and chemotherapy. This report provides an interesting polymeric ionophore strategy to deliver enough copper ions into cancer cells, which can also easily extend to other metal ions by replacing the ionophore components, thus having a wide application in nanomedicine.

Dual-Driven Ion/Electron Migration and Sodium Storage by In Situ Introduction of Copper Ions and a Carbon-Conductive Framework in a Tin-Based Sulfide Anode.

Tin sulfide (SnS) has emerged as a promising anode material for sodium ion batteries (SIBs) due to its high theoretical capacity and large interlayer spacing. However, several challenges, such as severe insufficient electrochemical reactivity, rapid capacity degradation, and poor rate performance, still hinder its application in SIBs. In this study, in situ introduction of copper ions and a carbon conductive framework to form SnS nanocrystals embedded in a Cu2SnS3 lamellar structure heterojunction composite (SnS/Cu2SnS3/RGO) with graphene as the supporting material is proposed to achieve dual-driven sodium ion/electron migration during the continuous electrochemical process. The designed structure facilitates the preferential electrochemical reduction of copper ions into copper nanocrystals during the discharge process and functions as a catalytically active center to promote multivalence tin sodiation reaction. Furthermore, during the charging process, the presence of copper nanocrystals also facilitates efficient desodiation of NaxSn and further activates to form higher valence state sulfides. As a result, the SnS/Cu2SnS3/RGO composite demonstrates high cycling stability with a high reversible capacity of 395 mAh g-1 at 5A g-1 after 500 cycles with a capacity retention of 85.6%. In addition, the assembled Na3V2(PO4)3∥SnS/Cu2SnS3/RGO sodium ion full cell achieves 93.7% capacity retention after 80 cycles at 0.5 A g-1.

Genome-wide comparative analyses for selection signatures indicate candidate genes for between-breed variability in copper accretion in sheep.

The problem of copper (Cu) intoxication and deficiency continues to impact economic gains and animal welfare in sheep husbandry. This study investigated the ovine genome for regions and potential genes under selection for Cu accretion between sheep breeds. For this, we compared ovine single nucleotide polymorphism (SNP) data of three Cu-susceptible breeds with three Cu-tolerant breeds. After merging SNP data of breeds and removal of related individuals, a total of 229 sheep and 45 640 autosomal SNPs were left. Then, we selected 14 individuals per breed into two datasets (datasets 1 and 2) for analysis of selection signatures using the Fixation index, cross-population extended haplotype homozygosity and haplotype-based FLK methods. Selection regions shared by both datasets detected by at least two methods revealed regions on OAR 4, 8 and 11 containing 54 candidate genes under selection for Cu accretion. Enrichment analysis revealed that 19 gene ontologies and 1 enriched Kyoto encyclopaedia of genes and genomes pathway terms were associated with the candidate genes under selection. Genes such as TP53, TNFSF13, TNFSF12, ALOX15, ALOX12, EIF5A and PREP are associated with the regulation of Cu homeostasis, programmed cell death or inflammatory response. We also found an enrichment of arachidonate 15-lipoxygenase activity, arachidonate 12-lipoxygenase activity and ferroptosis that influence cellular inflammation and cell death. These results shed light on ovine genomic regions under selection for Cu accretion and provide information on candidate genes for further studies on breed differences in ovine Cu accretion.

Direct ion chromatographic method for speciation micro analysis of arsenic forms in industrial samples with "rich" matrix composition.

The speciation analysis of arsenic has consistently been a subject of great interest. However, it remains challenging to analyze complex matrix samples that contain both arsenic and interfering components. In this case, it can be hard to choose the right combinations of different instrumental methods, or a separation method followed by detection, which is usually done using a spectral approach (hybrid methods). In the production control of copper electrorefining, the determination of the concentration of As (III) and As (V) helps to improve the quality of the cathode copper produced. This work investigated the possibility of directly determining both arsenic forms and total As in an electrolyte bath using ion chromatography (IC) with conductometric detection. The use of the ion chromatographic approach for the determination of As(V) in complex matrix samples such as copper electrolyte must take into account the presence of potential interferences from anions such as sulphates, sulfites, selenites, selenates, etc. The results revealed that the method is accurate and precise, with As(V) quantification limits of 15 µg.L-1 and detection limits of 5 µg.L-1. This method is suitable for assessing various types of arsenic in the production of electrolytic copper, with the aim of replacing the current technique that requires liquid-liquid extraction and ICP-OES detection. This led to the following improvements: Enhanced efficiency: The method eliminates the need for extensive and time-consuming sample preparation for the initial separation of arsenic forms. At the same time, the method's characteristics are comparable to those of ICP-OES with liquid-liquid extraction, which is often used in the speciation analysis of arsenic. The method is environmentally friendly as it avoids the use of organic and poisonous extractants. The method can simultaneously analyze other anions (PO43-, SO42-, F-, Cl-, etc.) with arsenates with appropriate calibration.

Performance improvement and application of copper-based nanomaterials in membrane technology for water treatment: A review.

Membrane fouling, including organic, inorganic, and biological fouling, poses enormous challenges in membrane water treatment. Incorporation of copper-based nanomaterials in polymeric membranes is highly favored due to their exceptional antibacterial properties and capacity to improve membrane hydrophilicity. This review extensively explores the utilization of copper-based nanomaterials in membrane technology for water treatment, with a specific focus on enhancing anti-fouling performance. It elaborates on how copper-based nanomaterials improve the surface properties of membrane materials (such as porosity, hydrophilicity, surface charge, etc.) through physical and chemical processes. It summarizes the properties and potential antibacterial mechanisms of copper-based nanomaterials, primarily by disrupting microbial cell structures through the generation of reactive oxygen species (ROS). Furthermore, recent efforts to enhance the environmental sustainability, cost-effectiveness, and recyclability of copper-based nanomaterials are outlined. The attempts to offer insights for the advancement of anti-fouling practices in water treatment through the use of copper-modified polymer membranes.

Trends of Copper Homeostasis in Neoplasms: A Systemic Bibliometric from 2013 to 2023.

Copper dysregulation is pivotal in tumorigenesis. This study aimed to elucidate the knowledge framework of copper homeostasis within neoplasms utilizing bibliometric analysis. Publications about copper homeostasis in neoplasms from 2013 to 2023 were retrieved from the Web of Science Core Collection and PubMed databases. The bibliometric analysis was conducted using the RStudio, the CiteSpace software, the VOSviewer software, and a bibliometric analysis platform. A total of 1701 articles were indexed from 73 countries and regions. China has emerged as the leading country with a publication proportion of 32.45%, followed by the USA (10.35%) and India (8.41%). Significant collaborations have been conducted among Chinese academic institutions. The Journal of Inorganic Biochemistry emerged as the most prominent journal. Among the 4841 keywords extracted from 671 journals, concepts of cell death, positron emission tomography, and tumor microenvironment emerged as the most significant hotspots. This bibliometric study reviewed significant academic development and synthesized research trends on copper homeostasis in neoplasms, providing a valuable reference for scholars.

Relative exchangeable copper, a high-quality biomarker for differentiation of Traditional Chinese Medicine syndrome in Wilson's disease.

OBJECTIVE: To investigate the value of relative exchangeable copper (REC) in diagnosing Wilson's disease (WD) and to determine its significance in the differentiation of Traditional Chinese Medicine (TCM) syndrome. METHODS: A total of 78 patients with WD were recruited on the same day of the medical visit, and among them, 32 were suffering from non-WD (N-WD) and 37 were heterozygous ATP7B carriers (HC) enrolled as controls. Molecular genetic testing was performed for diagnosing WD and HC. Additionally, REC levels in different TCM syndromes were investigated. The correlation between REC and serum ceruloplasmin (Cp), serum copper oxidase (CO), and 24-h urinary copper was analyzed using the Global Assessment Scale and Unified Wilson's Disease Rating Scale and the significance of REC in WD diagnosis was investigated. Resting-state functional magnetic resonance imaging was used to assess the clinical symptoms of WD and analyze its severity in different TCM syndromes. RESULTS: REC determination helped in significantly distinguishing patients with N-WD or HC from those with WD with a cut-off of 21.15%. Furthermore, the comparative analysis of REC ratios among different TCM syndromes showed markedly high REC levels in the dampness-heat internal accumulation syndrome group. Additionally, the seed-based functional connectivity value from the putamen to the cerebellum was significantly correlated with TCM syndromes. CONCLUSION: REC level is a high-quality biomarker for diagnosing WD that effectively reflects disease severity and plays an essential role in deciding on treatment strategies and prognosis. Furthermore, REC levels are closely related to TCM syndromes in WD; thus, it is a potential objective quantitative indicator for distinguishing TCM syndromes in WD.

Microelectrode investigation of iron and copper surfaces aged in presence of monochloramine.

Ductile iron and copper coupons were aged 137-189 days and 2 days, respectively, with 2 mg Cl2 L-1 monochloramine under four water chemistries (pH 7 or 9 and 0 or 3 mg L-1 orthophosphate). Subsequently, microelectrode profiles of monochloramine concentration, oxygen concentration, and pH were measured from the bulk water to near the coupon reactive surface, allowing estimation of flux and apparent surface reaction rate constants for monochloramine and oxygen. Both metals showed similar trends with orthophosphate where orthophosphate decreased metal reactivity with monochloramine (pH 9) and oxygen (pH 7). Comparing iron and copper coupons, apparent surface reaction rate constants for monochloramine and oxygen were one and two orders of magnitude greater, respectively, for iron coupons under all conditions. Overall, this research provides the first insights into monochloramine concentration, oxygen concentration, and pH by direct measurement near ductile iron and copper reactive surfaces aged in the presence of monochloramine.

Microbiological evaluation of vitamin C rich acerola mediated silver and copperoxide nanogel in treatment of periodontitis with and without diabetes mellitus.

Aim: Nanotechnology presents a promising approach for managing chronic periodontitis, a common oral disease characterized by gum inflammation and loss of supporting bone around teeth. This study aimed to evaluate the antimicrobial efficacy of acerola-mediated silver nanoparticles (AgNPs) gel and copper oxide nanoparticles (CuONPs) gel in periodontitis patients with and without diabetes. Materials and methods: The antimicrobial efficacy of acerola-mediated AgNPs gel and CuONPs nanogel was assessed using the agar well diffusion technique, Minimum Inhibitory Concentration (MIC) assay, Minimum Bactericidal Concentration (MBC) analysis, time-kill curve assay, and cytoplasmic and protein leakage analysis from periodontitis patients with and without diabetes. Results: The study found that acerola-mediated AgNPs gel demonstrated more consistent and effective antimicrobial activity against periodontitis, with lower MIC and MBC values compared to the CuONPs gel, across all tested concentrations. These results suggest that acerola-mediated AgNPs gel may be a more effective and targeted therapeutic agent for periodontal disease management. Conclusion: The findings emphasize the importance of nanoparticle gel concentration in optimizing periodontal treatment outcomes. Acerola-mediated AgNPs gel, with its superior efficacy and consistency in bactericidal activity, shows significant potential for periodontal therapy. Clinical significance: Innovative nanoparticles like copper and silver oxides exhibit antibacterial, anti-inflammatory, and antioxidant properties, making them promising agents for targeting periodontal pathogens. Acerola (Malpighia emarginata), with its high vitamin C content and antioxidant properties, is beneficial in mitigating oxidative stress associated with chronic periodontitis.

Synthesis and crystal structure of poly[[µ-chlorido-µ-(2,3-di-methyl-pyrazine)-copper(I)] ethanol hemisolvate], which shows a new isomeric CuCl(2,3-di-methyl-pyrazine) network.

Reaction of copper(I)chloride with 2,3-di-methyl-pyrazine in ethanol leads to the formation of the title compound, poly[[µ-chlorido-µ-(2,3-di-methyl-pyrazine)-copper(I)] ethanol hemisolvate], {[CuCl(C6H8N2)]·0.5C2H5OH} n or CuCl(2,3-di-methyl-pyrazine) ethanol hemisolvate. Its asymmetric unit consists of two crystallographically independent copper cations, two chloride anions and two 2,3-di-methyl-pyrazine ligands as well as one ethanol solvate mol-ecule in general positions. The ethanol mol-ecule is disordered and was refined using a split model. The methyl H atoms of the 2,3-di-methyl-pyrazine ligands are also disordered and were refined in two orientations rotated by 60° relative to each other. In the crystal structure, each copper cation is tetra-hedrally coordinated by two N atoms of two bridging 2,3-di-methyl-pyrazine ligands and two µ-1,1-bridg-ing chloride anions. Each of the two copper cations are linked by pairs of bridging chloride anions into dinuclear units that are further linked into layers via bridging 2,3-di-methyl-pyrazine coligands. These layers are stacked in such a way that channels are formed in which the disordered solvent mol-ecules are located. The topology of this network is completely different from that observed in the two polymorphic modifications of CuCl(2,3-di-methyl-pyrazine) reported in the literature [Jess & Näther (2006). Inorg. Chem. 45, 7446-7454]. Powder X-ray diffraction measurements reveal that the title compound is unstable and transforms immediately into an unknown crystalline phase.

Carboxymethyl chitosan nanoparticle-modulated cationic hydrogels doped with copper ions for combating bacteria and facilitating wound healing.

The simultaneous administration of antibacterial treatment and acceleration of tissue regeneration are crucial for the effective healing of infected wounds. In this work, we developed a facile hydrogel (PCC hydrogel) through coordination and hydrogen interactions by polymerizing acrylamide monomers in the presence of carboxymethyl chitosan nanoparticles and copper ions. The prepared PCC hydrogel demonstrated effective bacterial capture from wound exudation and exhibited a potent bactericidal activity against methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa. Furthermore, slow release of copper ions from the hydrogel facilitated wound healing by promoting cell migration, collagen deposition and angiogenesis. Additionally, the PCC hydrogel possessed excellent biocompatibility and hemostatic properties. The practical effectiveness of PCC hydrogel in addressing bacterial infections and facilitating wound healing was verified using a mouse model of MRSA-induced wound infections. Overall, this work presents a simple yet efficient multifunctional hydrogel platform that integrates antibacterial activity, promotion of wound healing, and hemostasis for managing bacteria-associated wounds.