Investigation of mechanical behavior of porous carbon-based matrix by molecular dynamics simulation: Effects of Si doping.

Understanding the mechanical properties of porous carbon-based materials can lead to advancements in various applications, including energy storage, filtration, and lightweight structural components. Also, investigating how silicon doping affects these materials can help optimize their mechanical properties, potentially improving strength, durability, and other performance metrics. This research investigated the effects of atomic doping (Si particle up to 10 %) on the mechanical properties of the porous carbon matrix using molecular dynamics methods. Young's modulus, ultimate strength, radial distribution function, interaction energy, mean square displacement and potential energy of designed samples were reported. MD outputs predict the Si doping process improved the mechanical performance of porous structures. Numerically, Young's modulus of the C-based porous matrix increased from 234.33 GPa to 363.82 GPa by 5 % Si inserted into a pristine porous sample. Also, the ultimate strength increases from 48.54 to 115.93 GPa with increasing Si doping from 1 % to 5 %. Silicon doping enhances the bonding strength and reduces defects in the carbon matrix, leading to improved stiffness and load-bearing capacity. This results in significant increases in mechanical performance. However, excess Si may disrupt the optimal bonding network, leading to weaker connections within the matrix. Also, considering the negative value of potential energy in different doping percentages, it can be concluded that the amount of doping added up to 10 % does not disturb the initial structure and stability of the system, and the structure still has structural stability. So, we expected our introduced atomic samples to be used in actual applications.

Regulating the zinc ion transport kinetics of Mn3O4 through copper doping towards high-capacity aqueous Zn-ion battery.

High working voltage, large theoretical capacity and cheapness render Mn3O4 promising cathode candidate for aqueous zinc ion batteries (AZIBs). Unfortunately, poor electrochemical activity and bad structural stability lead to low capacity and unsatisfactory cycling performance. Herein, Mn3O4 material was fabricated through a facile precipitation reaction and divalent copper ions were introduced into the crystal framework, and ultra-small Cu-doped Mn3O4 nanocrystalline cathode materials with mixed valence states of Mn2+, Mn3+ and Mn4+ were obtained via post-calcination. The presence of Cu acts as structural stabilizer by partial substitution of Mn, as well as enhance the conductivity and reactivity of Mn3O4. Significantly, based on electrochemical investigations and ex-situ XPS characterization, a synergistic effect between copper and manganese was revealed in the Cu-doped Mn3O4, in which divalent Cu2+ can catalyze the transformation of Mn3+ and Mn4+ to divalent Mn2+, accompanied by the translation of Cu2+ to Cu0 and Cu+. Benefitting from the above advantages, the Mn3O4 cathode doped with moderate copper (abbreviated as CMO-2) delivers large discharge capacity of 352.9 mAh g-1 at 100 mA g-1, which is significantly better than Mn3O4 (only 247.8 mAh g-1). In addition, CMO-2 holds 203.3 mAh g-1 discharge capacity after 1000 cycles at 1 A g-1 with 98.6 % retention, and after 1000 cycles at 5 A g-1, it still performs decent discharge capacity of 104.2 mAh g-1. This work provides new ideas and approaches for constructing manganese-based AZIBs with long lifespan and high capacity.

Carbon quantum dots from carbohydrate-rich residue of birch obtained following lignin-first strategy.

Carbon quantum dots (CQDs) were successfully synthesized from carbohydrate-rich residue of birch obtained following the lignin-first strategy. The optical and physicochemical properties of the CQDs were studied, along with their potential for photocatalytic pollutant degradation. By combining solvothermal and chemical oxidation methods, the product yield of CQDs from carbohydrate-rich residue reached 8.1 wt%. Doping nitrogen enhances the graphitization of CQDs and introduces abundant amino groups to the surface, thereby boosted the quantum yield significantly from 8.9 % to 18.7 %-19.3 %. Nitrogen-doped CQDs exhibited efficient photocatalytic degradation of methylene blue, reaching 37 % within 60 min, with a kinetic degradation rate of 0.00725 min-1. This study demonstrates that carbohydrate-rich residue obtained from lignin-first strategy are ideal precursors for synthesizing CQD with high mass yield and quantum yield by combining solvothermal treatment and chemical oxidation methods, offering a novel approach for the utilization of whole biomass components following the lignin-first strategy.

Synergistic manipulation of sulfur vacancies and palladium doping of In2S3 for enhanced photocatalytic H2 production.

In this study, a simple one-pot synthesis process is employed to introduce Pd dopant and abundant S vacancies into In2S3 nanosheets. The optimized Pd-doped In2S3 photocatalyst, with abundant S vacancies, demonstrates a significant enhancement in photocatalytic hydrogen evolution. The joint modification of Pd doping and rich S vacancies on the band structure of In2S3 result in an improvement in both the light absorption capacity and proton reduction ability. It is worth noting that photogenerated electrons enriched by S vacancies can rapidly migrate to adjacent Pd atoms through an efficient transfer path constructed by Pd-S bond, effectively suppressing the charge recombination. Consequently, the dual-defective In2S3 shows an efficient photocatalytic H2 production rate of 58.4 ± 2.0 µmol·h-1. Additionally, further work has been conducted on other ternary metal sulfide, ZnIn2S4. Our findings provide a new insight into the development of highly efficient photocatalysts through synergistic defect engineering.

Regulating the electronic structure of Pt SAs-Ni2P for enhanced hydrogen evolution reaction.

The single atom catalysts (SACs) show immense promise as catalytic materials. By doping the single atoms (SAs) of precious metals onto substrates, the atomic utilization of these metals can be maximized, thereby reducing catalyst costs. The electronic structure of precious metal SAs is significantly influenced by compositions of doped substrates. Therefore, optimizing the electronic structure through appropriate doping of substrates can further enhance catalytic activity. Here, Pt single atoms (Pt SAs) are doped onto transition metal sulfide substrate NiS2 (Pt SAs-NiS2) and phosphide substrate Ni2P (Pt SAs-Ni2P) to design and prepare catalysts. Compared to the Pt SAs-NiS2 catalyst, the Pt SAs-Ni2P catalyst exhibits better hydrogen evolution catalytic performance and stability. Under 1 M KOH conditions, the hydrogen evolution mass activity current density of the Pt SAs-Ni2P catalyst reaches 0.225 A mgPt-1 at 50 mV, which is 33 times higher than that of commercial Pt/C catalysts. It requires only 44.9 mV to achieve a current density of 10 mA cm-2. In contrast, for the Pt SAs-NiS2 catalyst, the hydrogen evolution mass activity current density is 0.178 A mgPt-1, requiring 77.8 mV to achieve a current density of 10 mA cm-2. Theoretical calculations indicate that in Pt SAs-Ni2P, the interaction between Pt SAs and the Ni2P substrate causes the Pt d-band center to shift downward, enhancing the H2O desorption and providing optimal H binding sites. Additionally, the hollow octahedral morphology of Ni2P provides a larger surface area, exposing more reactive sites and improving reaction kinetics. This study presents an effective pathway for preparing high-performance hydrogen evolution electrocatalysts by selecting appropriate doped substrates to control the electronic structure of Pt SAs.

Magnesium-promoted rapid self-reconstruction of NiFe-based electrocatalysts toward efficient oxygen evolution.

The acceleration of active sites formation through surface reconstruction is widely acknowledged as the crucial factor in developing high-performance oxygen evolution reaction (OER) catalysts for water splitting. Herein, a simple one-step corrosion method and magnesium (Mg)-promoted strategy are reported to develop the NiFe-based catalyst with enhanced OER performance. The Mg is introduced in NiFe materials to preparate a "pre-catalyst" Mg-Ni/Fe2O3. In-situ Raman shows that Mg doping would accelerate the self-reconstruction of Ni/Fe2O3 to form active NiOOH species during OER. In-situ infrared indicates that Mg doping benefits the formation of *OOH intermediate. Theoretical analysis further confirms that Mg doping can optimize the adsorption of oxygen intermediates, accelerating the OER kinetics. Accordingly, the Mg-Ni/Fe2O3 catalyst exhibits excellent OER performance with overpotential of 168 mV at 10 mA cm-2. The anion exchange membrane water electrolyzer achieved 200 mA cm-2 at voltage of 1.53 V, showing excellent stability over 500 h as well. This work demonstrates the potential of Mg-promoted strategy in regulating the activity of transition metal-based OER electrocatalysts.

Phosphorus and sulfur co-doped nickel molybdate with rich-oxygen vacancies for efficient water splitting.

The rational design of high-performance electrocatalysts is essential for promoting the industrialization of electrocatalytic water-splitting technology. Herein, phosphorus and sulfur co-doped nickel molybdate with rich-oxygen vacancies (P, S-NiMoO4) was prepared as an efficient bifunctional self-supporting water-splitting catalyst from the perspective of enhancing the conductivity and optimizing the electronic configurations. The incorporation of P, S and oxygen vacancies greatly enhances the conductivity and charge-transfer efficiency of NiMoO4. Additionally, P and S can serve as proton carriers and electron acceptors to enhance the catalytic activity by accelerating proton activation and high-valent metal generation in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). As expected, P, S-NiMoO4 demonstrates efficient bifunctional catalytic activity with an overpotential of only 31/206 mV at 10 mA cm-2 for HER/OER in 1 M KOH. Meantime, the electrolyzer assembled with P, S-NiMoO4 as electrodes requires a voltage of only 1.55 V to achieve a water-splitting current density of 50 mA cm-2 along with good stability over 110 h. This work puts forward a novel approach based on elemental doping and vacancy engineering for the design of effective and enduring catalysts for water splitting.

Perovskite-Doped Modulated Color-Selective Photosynaptic Transistors for Target Object Recognition.

The processing of multicolor noisy images in visual neuromorphic devices requires selective absorption at specific wavelengths; however, it is difficult to achieve this because the spectral absorption range of the device is affected by the type of material. Surprisingly, the absorption range of perovskite materials can be adjusted by doping. Herein, a CdCl2 co-doped CsPbBr3 nanocrystal-based photosensitive synaptic transistor (PST) is reported. By decreasing the doping concentration, the response of the PST to short-wavelength light is gradually enhanced, and even weak light of 40 µW·cm-2 can be detected. Benefiting from the excellent color selectivity of the PST device, the device array is applied to feature extraction of target blue items and removal of red and green noise, which results in the recognition accuracy of 95% for the noisy MNIST data set. This work provides new ideas for the application of novel transistors integrating sensors and storage computing.

Meldonium Supplementation in Professional Athletes: Career Destroyer or Lifesaver?

Meldonium is a substance with known anti-anginal effects demonstrated by numerous studies and human clinical trials; however, it does not possess marketing authorization within the European Union, only in ex-Soviet republics. Since 2016, meldonium has been included by the World Anti-doping Agency (WADA) on the S4 list of metabolic modulators. In performance athletes, meldonium is now considered a doping agent due to its capacity to decrease lactate production during and after exercise, its capability to enhance the storage and utilization of glycogen, and its protective action against oxidative stress. Together, these attributes can significantly improve aerobic endurance, cardiac function, and capacity as well as shorten recovery times (allowing higher intensity training), thereby enhancing performance. The purpose of this review is to highlight the most important mechanisms underlying the protective effect of meldonium against mitochondrial dysfunction (MD), which is responsible for oxidative stress, inflammation, and the cardiac changes known as "athletic heart syndrome." Meldonium acts as an inhibitor of γ-butyrobetaine hydroxylase (BBOX), preventing the de novo synthesis of carnitine and its absorption at the intestinal level via the organic cation/carnitine transporter 2 (OCTN2) and directing the oxidation of fatty acids to the peroxisomes. The decrease in mitochondrial ß-oxidation of fatty acids leads to a reduction in lipid peroxidation products that cause oxidative stress and prevent the formation of acyl/acetyl-carnitines involved in numerous pathological disorders. Given the recent findings of the potentially detrimental effects of prolonged high-intensity exercise on cardiovascular health and coronary atherosclerosis, there may be legitimate arguments for the justification of the use of substances like meldonium as protective supplements for athletes.

Enhanced photocatalytic performance of CuS/O,N-CNT composite for solar-driven organic contaminant degradation.

Herein, a hydrothermal etching approach was used to generate an innovative CuS/O,N-CNT composite. The hydrothermal etching of g-C3N4 led to the creation of O,N-CNT, with ethanol as the oxygen source. The SEM and TEM characterizations confirmed the formation of CNT, whereas the XPS analysis proved the doping of oxygen and nitrogen in the CNT matrix along with the incorporation of CuS. Under sun irradiation, the produced CuS/O,N-CNT showed outstanding photocatalytic efficiency, eliminating methyl orange and methylene blue dyes with 97.21% and 98.11% efficacy, respectively. Adding hydrothermally etched O,N-CNT increased light absorption and charge migration kinetics, as can be studied from the UV-DRS and PL analysis; hence, the observed improvements in light absorption and charge transfer pathways contributed to the CuS/O,N-CNT composite's enhanced photocatalytic activity, indicating its potential for efficient elimination of organic contaminants under solar irradiation. The catalyst demonstrated high reusability performance up to six cycles and significantly degraded other dyes. Scavenger analysis, along with VB-XPS and UV-DRS analysis, aid in developing a photocatalytic mechanism that confirms the participation of hydroxyl and superoxide radicals in the degradation process.

Synthesis and characterization of enhanced azo-azomethine doped PANI/HCl conducting polymers for electrochemical applications.

In this study, conducting polymers composed of polyaniline hydrochloric acid (PANI/HCl) with varying concentrations of a newly synthesized azo-azomethine dye (4-(((Z)-2-hydroxy-5-((Z)-(4-hydroxyphenyl)diazenyl)-3-methoxybenzylidene)amino)benzoic acid) were synthesized using a chemical oxidative polymerization technique. The synthesized azo-azomethine was characterized by FTIR, 1H-NMR, 13C-NMR, and HRMS. The effects of varying the concentration of the dopant azo-azomethine in PANI/HCl on its optical, structural, thermal, and electrical properties were examined using FTIR, UV-Vis, XRD, FESEM, TEM, cyclic voltammetry, and electrical impedance spectra. The results indicate that the optical, direct, and indirect band gaps of the doped polymers decreased from 4.48 and 3.96 eV to 3.91 and 2.49 eV, respectively. The crystalline structure and phase transitions in the doped polymers were examined using X-ray diffraction. Cyclic voltammetry demonstrated that the doped polymers exhibited higher electrochemical conductivity compared to the pure polymer, with the specific capacitance increasing from 161.17 to 816.9 F/g. The electrical impedance spectra revealed the bulk resistance and conductivity of the material. Among all the doped polymers, PANI/HCl with an azo-azomethine concentration of 5 × 10-5 M exhibited lower bulk resistance (10 Ω) and higher electrical conductivity (σ = 50.09 × 10-3 S cm-1).

Constructing Multi-Electron Reactions by Doping Mn2+ to Increase Capacity and Stability in K3.2V2.8Mn0.2(PO4)4/C of Phosphate Cathodes for Potassium-Ion Batteries.

Vanadium-based phosphate cathode materials (e.g., K3V2(PO4)3) have attracted widespread concentration in cathode materials in potassium-ion batteries owing to their stable structure but suffer from low capacity and poor conductivity. In this work, an element doping strategy is applied to promote its electrochemical performance so that K3.2V2.8Mn0.2(PO4)4/C is prepared via a simple sol-gel method. The heterovalent Mn2+ is introduced to stimulated multiple electron reactions to improve conductivity and capacity, as well as interlayer spacing. Galvanostatic intermittent titration technique (GITT) and in situ X-ray diffraction results further confirm that Mn-doping in the original electrode can obtain superior electrode process kinetics and structural stability. The prepared K3.2V2.8Mn0.2(PO4)4/C exhibits a high-capacity retention of 80.8% after 1 500 cycles at 2 C and an impressive rate capability, with discharge capacities of 87.6 at 0.2 C and 45.4 mA h g-1 at 5 C, which is superior to the majority of reported vanadium-based phosphate cathode materials. When coupled K3.2V2.8Mn0.2(PO4)4/C cathode with commercial porous carbon (PC) anode as the full cell, a prominent energy density of 175 Wh kg-1 is achieved based on the total active mass. Overall, this study provides an effective strategy for meliorating the cycling stability and capacity of the polyanion cathodes for KIB.

Resonance-Assisted Self-Doping in Robust Open-Shell Ladder-Type Oligoaniline Analogues.

A novel resonance-assisted self-doping mechanism has been demonstrated in ladder-type oligoaniline-derived organic conductors. The new class of compounds has a unique structure incorporating acidic phenolic hydroxyl groups into the ladder-type cyclohexadiene-1,4-diimine core, enabling efficient proton transfer and self-doping without the need for external dopants. Mechanistic studies and computational studies confirm the open-shell, zwitterionic nature of the self-doped state and the significant role played by the dielectric environment. This new self-doping mechanism allows for higher stability and durability in the material's electronic performance. The self-doped form retains durability under harsh conditions and maintains its properties over extended periods of time.

Interest of hair tests to discriminate a tail end of a doping regimen from a possible contamination in case of challenging an anti-doping rule violation. V. Case reports involving trimetazidine, a drug where the concentration after a single 20 mg dose has been established.

The identification of trimetazidine, a medicine used for treating stable angina pectoris and for preventing angina attacks, has been recently observed in doping cases involving high profile athletes from various countries over the world. In all the files where the authors have been involved, the urine concentration of trimetazidine was low (<2 ng/mL), and the athletes argued that contamination was the source of their adverse analytical finding. It is possible to challenge imposed sanctions in relation to an adverse analytical finding, but it is the responsibility of the athlete to demonstrate he/she is innocent and can qualify for no fault or negligence. When the delay between the urine collection and the notification of the violation was not too long (less than 6 months), these athletes requested a head hair test. Trimetazidine was analyzed by an original LC-MS/MS method involving pH 9.5 borate buffer overnight incubation of 20 mg and subsequent solvents extraction in presence of trimetazidine-D8 used as internal standard. Linearity was verified from 1 to 200 pg/mg (R2 = 0.9987). Limit of detection of the method was 0.1 pg/mg. The hair specimen of a male subject, collected 4 weeks after single oral ingestion of 20 mg trimetazidine, tested positive at 146 pg/mg in the corresponding segment. Concentrations of trimetazidine measured in several hair specimens (n = 5) collected from athletes challenging their anti-doping rule violation were below 1 pg/mg, which is consistent with incidental exposure due to contamination. This is the first evidence that trimetazidine is incorporated in human hair after a single therapeutic dose administration.

Solution-Processed Thick Hole-Transport Layer for Reliable Quantum-Dot Light-Emitting Diodes Based on an Alternatingly Doped Structure.

The operating lifetime of quantum-dot light-emitting diodes (QLED) is a bottleneck for commercial display applications. To enhance the operational stability of QLEDs, we developed a robust solution-processed highly conductive hole-transport-layer (HTL) structure, which enables a thick HTL structure to mitigate the electric field. An alternating doping strategy, which involves multiple alternating stacks of N4,N4'-di(naphthalen-1-yl)-N4,N4'-bis(4-vinylphenyl)biphenyl-4,4'-diamine and phosphomolybdic acid layers, could provide significantly improved conductivity; more specifically, the 90 nm-thick alternatingly doped HTL exhibited higher conductivity than the 45 nm-thick undoped HTL. Therefore, when applied to a QLED, the increase in the thickness of the alternatingly doped HTL increased device reliability. As a result, the lifetime of the QLED with a thick, alternatingly doped HTL was 48-fold higher than that of the QLED with a thin undoped HTL. This alternating doping strategy provides a new paradigm for increasing the stability of solution-based optoelectronic devices in addition to QLEDs.

Synergistically Engineering Grains and Grain Boundaries toward Li Dendrite-Free Li7La3Zr2O12.

Cation-doped cubic Li7La3Zr2O12 is regarded as a promising solid electrolyte for safe and energy-dense solid-state lithium batteries. However, it suffers from the formation of Li2CO3 and high electronic conductivity, which give rise to an unconformable Li/Li7La3Zr2O12 interface and lithium dendrites. Herein, composite AlF3-Li6.4La3Zr1.4Ta0.6O12 solid electrolytes were created based on thermal AlF3 decomposition and F/O displacement reactions under a high-temperature sintering process. When the AlF3 is thermally decomposed, it leaves Al2O3/AlF3 meliorating the grain boundaries and F- ions partially displacing O2- ions in the grains. Due to the higher electronegativity of F- in the grains and the grain-boundary modification, these AlF3-Li6.4La3Zr1.4Ta0.6O12 deliver optimized electronic conduction and chemical stability against the formation of Li2CO3. The Li/AlF3-Li6.4La3Zr1.4Ta0.6O12/Li cell exhibits a low interfacial resistance of ∼16 Ω cm2 and an ultrastable long-term cycling behavior for 800 h under a current density of 200 µA/cm2, leading to Li//LiCoO2 solid-state batteries with good rate performance and cycling stability.

Downscaling of Organic Field-Effect Transistors based on High-Mobility Semiconducting Blends for High-Frequency Operation.

Small molecule/polymer semiconductor blends are promising solutions for the development of high-performing organic electronics. They are able to combine ease in solution processability, thanks to the tunable rheological properties of polymeric inks, with outstanding charge transport properties thanks to high crystalline phases of small molecules. However, because of charge injection issues, so far such good performances are only demonstrated in ad-hoc device architectures, not suited for high-frequency applications, where transistor dimensions require downscaling. Here, the successful integration of the most performing blend reported to date, based on 2,7-dioctyl[1] benzothieno[3,2-b][1]benzothiophene (C8-BTBT) and poly(indacenodithiophene-co-benzothiadiazole) (C16IDT-BT), in OFETs characterized by channel and overlap lengths equal to 1.3 and 1.9 µm, respectively, is demonstrated, enabling a transition frequency of 23 MHz at -8 V. Two key aspects allowed such result: molecular doping, leading to width-normalized contact resistance of only 260 Ωcm, allowing to retain an apparent field-effect mobility as high as 3 cm2/(Vs) in short channel devices, and the implementation of a high capacitance dielectric stack, enabling the reduction of operating voltages below 10 V and the overcoming of self-heating issues. These results represent a fundamental step for the future development of low-cost and high-speed printed electronics for IoT applications.

Ion-Exchange Doping of Semiconducting Single-Walled Carbon Nanotubes.

Semiconducting single-walled carbon nanotubes (SWCNTs) are a promising thermoelectric material with high power factors after chemical p- or n-doping. Understanding the impact of dopant counterions on charge transport and thermoelectric properties of nanotube networks is essential to further optimize doping methods and to develop better dopants. This work utilizes ion-exchange doping to systematically vary the size of counterions in thin films of small and large diameter, polymer-sorted semiconducting SWCNTs with AuCl3 as the initial p-dopant and investigates the impact of ion size on conductivity, Seebeck coefficients, and power factors. Larger anions are found to correlate with higher electrical conductivities and improved doping stability, while no significant effect on the power factors is found. Importantly, the effect of counterion size on the thermoelectric properties of dense SWCNT networks is not obscured by morphological changes upon doping. The observed trends of carrier mobilities and Seebeck coefficients can be explained by a random resistor model for the nanotube network that accounts for overlapping Coulomb potentials leading to the formation of an impurity band whose depth depends on the carrier density and counterion size. These insights can be applied more broadly to understand the thermoelectric properties of doped percolating disordered systems, including semiconducting polymers.

Revealing the Impact of Dual Site Modification on the Phase Transformation and Ion Transport Mechanism of Ni-Rich Cathode Materials.

Ni-rich cathode materials have garnered significant attention attributable to the high reversible capacity and superior rate performance, particularly in the electric vehicle industry. However, the structural degradation experienced during cycling results in rapid capacity decay and deterioration of the rate performance, thereby impeding the widespread application of Ni-rich cathodes. Herein, a Mg/Ti co-doping strategy was developed to boost the structure stability and Li-ion transport kinetics of the Ni-rich cathode material LiNi0.90Co0.05Mn0.05O2 (NCM9055) under long cycle. It is demonstrated that the Mg2+ ions inserted into the lithium layer could serve as pillars, enhancing the stability of the delithiated layer structure. The introduction of robust Ti-O bonding mitigated the detrimental H2-H3 phase transition (∼4.2 V) during cycling. In addition, despite the fact that Mg/Ti co-doping slightly reduces Li+ diffusion coefficient in the modified cathode material (NCM9055-MT), it effectively stabilized the robustness of the layered structure and maintained the Li+ diffusion channel while charging and discharging, thereby improving the Li+ diffusion coefficient after a long cycle. Therefore, the Mg/Ti co-doped cathode materials exhibited an exceptional capacity retention rate of 99.9% (100 cycles, 1 C). Additionally, the Li+ diffusion coefficient of the co-doped NCM9055-MT (2.924 × 10-10 cm2 s-1) after 100 cycles was effectively enhanced compared with the case of undoped NCM9055 (4.806 × 10-11 cm2 s-1). This work demonstrates that the Mg/Ti co-doping approach effectively enhanced the stability of layered Ni-rich cathode materials.

Impact of doping with organic dopants and mixed doping with alkali metals and organic dopants on the absorption, electronic, optoelectronic, thermodynamic and nonlinear optical properties of dibenzo[b,def]chrysene in gaseous media: DFT and TD-DFT studies.

CONTEXT: In this study, we evaluate the geometrical, absorption, optoelectronic, electronic, nonlinear optical (NLO) and thermodynamic properties of dibenzo[b,def]chrysene molecule derivatives by means of DFT and TD-DFT simulations. In view of the aim of producing new high-performance materials for non-linear optics (NLO) by doping test, two types of doping were used. We obtained six derivatives by doping with organic dopants (Nitro, amide and ticyanoethenyl) and mixed alkali metal (potassium) and organic dopants. Doping with organic dopants produced molecules A, B and C, respectively when substituting one hydrogen with nitro (NO2), amide (CONH2) and tricyanoethenyl (C5N3) groups, while mixed doping involved considering A, B and C and then substituting two hydrogens with two potassiums to obtain compounds D, E and F respectively. The negative values of the various interaction energies calculated for all the doped molecules show that they are all stable, but also that molecules C and F are the most stable in the case of both dopings. The gap energies calculated at the B3LYP level of theory are all below 3 eV, which means that all the molecules obtained are semiconductors. Better still, compounds C and F, with gap energies of 1.852 eV and 1.204 eV, respectively, corresponding to decreases of 35.67% and 58.18% in gap energy compared with the pristine molecule, are more reactive than the other doped molecules. Mixed doping is therefore a highly effective way of narrowing the energy gap and boosting the semiconducting character and reactivity of organic materials. Optoelectronic properties have also been improved, with refractive index values higher than those of the reference material, glass. This shows that our compounds could be used under very high electric field conditions of the order of 4.164 × 109 V.m-1 for C and 7.410 × 109 V.m-1 for F the highest values at the B3LYP level of theory. The maximum first-order hyperpolarizability values for both types of doping are obtained at the CAM-B3LYP level of theory by C: ß mol = 92.088 × 10-30esu and by F: ß mol = 129.449 × 10-30esu, and second-order values are also given by these same compounds. These values are higher than the reference value, which is urea, making our compounds potential candidates for high-performance NLO applications. In dynamic mode and at a frequency of 1064 nm, at the CAM-B3LYP level of theory, the highest dynamic hyperpolarizability coefficients were obtained by C and F. Hyper-Rayleigh scattering ß HRS , coefficients of the electro-optical Pockel effect (EOPE), EFISHG, third-order NLO-response degree four-wave mixing γ DFWM , quadratic nonlinear refractive index n2 were also calculated. The maximum values of n2 are obtained by C (6.13 × 10-20 m2/W) and F (6.60 × 10-20 m2/W), these values are 2.24 times higher than that of fused silica which is the reference for degenerate four-wave mixing so our molecules could also have applications in optoelectronics as wavelength converters, optical pulse modulators and optical switches. METHODS: Using the DFT method, we were able to determine the optimized and stable electronic structures of doped dibenzo[b,def]chrysene derivatives in the gas phase. We limited ourselves to using the proven B3LYP and CAMB3LYP levels of theory for calculating electronic properties, and non-linear optics with the 6-311G + + (d,p) basis set, which is a large basis set frequently used for these types of compound. Gaussian 09 software was used to run our calculations, and Gauss View 6.0.16 was used to visualize the output files. TD-DFT was also used to determine absorption properties at the B3LYP level of theory, using the same basis set.