Cell growth monitoring in a tetrapolar electrode configuration.

There are various methods for cell growth monitoring. However, most of these methods have drawbacks, such as being invasive, not providing real-time results, or being costly. In this study, we present an alternate method of cell growth monitoring, which is low-cost, non-invasive, real-time, and uses Electrical Impedance Spectro-scopy (EIS). In this work, commercially available culture plates were fitted with custom tetrapolar electrodes, and mouse cells were cultured on them. The variation of culture media impedance, resulting from cell growth, proliferation and other metabolic activities, was recorded over a period of seven days. The results demonstrated an initial increase in impedance corresponding with the cell growth phase, followed by a decrease during the cell death (apoptosis) phase, as confirmed by microscope images. Overall, the results show that our method to monitor cell growth using tetrapolar electrodes is promising and can be further refined for related applications.

Cochlear Implantation: Long-Term Effect of Early Activation on Electrode Impedance.

Objectives: The growing adoption of cochlear implants (CIs) necessitates understanding the factors influencing long-term performance and improved outcomes. This work investigated the long-term effect of early activation of CIs on electrode impedance in a large sample of CI users at different time points. Methods: A retrospective study on 915 ears from CI patients who were implanted between 2015 and 2020. According to their CI audio processor activation time, the patients were categorized into early activation (activated 1 day after surgery, n = 481) and classical activation (activated 4 weeks after surgery, n = 434) groups. Then, the impact of the activation times on the electrode impedance values, along the electrode array contacts, at different time points up to two years was studied and analyzed. Results: The early activation group demonstrated lower impedance values across all the electrode array sections compared to the classical activation at 1 month, 1 year, and 2 years post-implantation. At 1 month, early activation was associated with a reduction of 0.34 kΩ, 0.46 kΩ, and 0.37 kΩ in the apical, middle, and basal sections, respectively. These differences persisted at subsequent intervals. Conclusions: Early activation leads to sustained reductions in the electrode impedance compared to classical activation (CA), suggesting that earlier activation might positively affect long-term CI outcomes.

Evaluation of an impedance-based method to monitor the insertion of the electrode array during cochlear implantation.

PURPOSE: Cochlear implantation is a prevalent remedy for severe-to-profound hearing loss. Optimising outcomes and hearing preservation, and minimising insertion trauma, require precise electrode placement. Objective monitoring during the insertion process can provide valuable insights and enhance surgical precision. This study assesses the feasibility and performance of an impedance-based method for monitoring electrode insertion, compared to the surgeon's feedback. METHODS: The study utilised the Insertion Monitoring Tool (IMT) research software, allowing for real-time measurement of impedance and evoked compound action potential (eCAP) during electrode insertion in 20 patient implantations. This enabled an impedance-based method to continuously assess the status of each electrode during the insertion process. The feasibility and performance was evaluated and compared to the surgeon's feedback approach. eCAP measurements focused merely on feasibility without searching specific responses. RESULTS: The IMT demonstrated feasibility in measuring real-time impedances and eCAP during the insertion of the electrode array. The impedance-based method exhibited potential for accurately monitoring the insertion depth with a high success rate. However, further development is needed to improve the number of usable contacts. CONCLUSIONS: Objective monitoring with the impedance-based method shows promise as a valuable tool to enhance the precision of cochlear implant electrode insertion respecting insertion distance estimation. The IMT research software proved feasible in recording real-time impedances and eCAP during electrode insertion. While this impedance-based method exhibits high success rates, further improvements are required to optimise the number of usable contacts. This study highlights the potential of objective monitoring techniques to enhance cochlear implantation outcomes.

An electrode-impedance-aware neurostimulator IC that achieves low-power consumption and fast charge balance.

Implantable neural stimulation is becoming increasingly popular for treating neurologically impaired patients, restoring neural functions which would otherwise be lost due to diseases or injuries. The charge balance of the stimulus pulses is of paramount importance for the long-term safety of the electrode-tissue interface. This paper presents a novel neurostimulator integrated circuit in which two novel charge balancing schemes are proposed. One is based on acquiring the access resistance part (RS) of the inter-electrode impedance. Thanks to its adaptive anodic phase, the RS-based charge balance circuit does not require an additional discharge phase, achieving faster charge balance than most existing stimulator ICs. The other scheme is based on acquiring the double-layer capacitance part (CDL) of the inter-electrode impedance and the entire charge balancing process (inc. monitoring, computation and compensation) is performed in the analog domain. This is in sharp contrast to the existing electrode-impedance-aware charge balancing schemes which require ADCs and compute the net charge in the digital domain. Hence the new impedance-aware charge-balancing scheme is faster and more power friendly. The impedance-aware stimulator ASIC has been implemented using X-FAB's 180-nm CMOS process. The post-layout simulation results suggest a good charge balance is achieved as the voltage deviation from the electrode offset voltage on the electrode after the charge compensation reduces to 2.64 mV and -1.39 mV under the RS-based and CDL-based charge balancing schemes, respectively. The additional power overhead due to the proposed CDL-based charge balancer circuit is 2.46 µW at a stimulation rate of 400 Hz.

The association between electrode impedance and short-term outcomes in cochlear implant recipients of slim modiolar and slim straight electrode arrays.

OBJECTIVES: Electrode impedance measurements from cochlear implants (CI) reflect the status of the electrode array as well as the surrounding cochlear environment, and could provide a clinical index of functional changes with the CI. The goals of this study were to examine (1) the impact of electrode array type on electrode impedance, and (2) the relationship between electrode impedance and short-term hearing preservation and speech recognition outcomes. METHODS: Retrospective study of 115 adult hearing preservation CI recipients of a slim modiolar or slim straight array. Common ground electrode impedances, pre- and post-operative hearing thresholds and CNC word recognition scores were retrieved. RESULTS: Electrode impedances were significantly higher for recipients of the straight electrode array. Within individuals, electrode impedances were stable after the first week post-activation. However, increased standard deviation of electrode impedances was associated with greater loss of low frequency hearing at initial activation, and with poorer speech recognition at 6 months post-implantation. CONCLUSIONS: Results demonstrate that electrode impedances depend on the type of implanted array. Findings also suggest that there may be a role for the variability in electrode impedance across electrodes as an indicator of changes in the intracochlear environment that contribute to outcomes with a CI.

Wireless CardioS framework for continuous ECG acquisition.

A first-level textile-based electrocardiogram (ECG) monitoring system referred to as "CardioS" (cardiac sensor) for continuous health monitoring applications is proposed in this study to address the demand for resource-constrained environments. and the signal quality assessment of a wireless CardioS was studied. The CardioS consists of a Lead-I ECG signal recorded wirelessly using silver-plated nylon woven (Ag-NyW) dry textile electrodes to compare the results of wired wearable Ag-NyW textile electrode-based ECG acquisition system and CardioS. The effect of prolonged usage of Ag-NyW dry electrodes on electrode impedance was tested in the current work. In addition, electrode half-cell potential was measured to validate the range of Ag-NyW dry electrodes for ECG signal acquisition. Further, the quality of signals recorded by the proposed wireless CardioS framework was evaluated and compared with clinical disposable (Ag-AgCl Gel) electrodes. The signal quality was assessed in terms of mean magnitude coherence spectra, signal cross-correlation, signal-to-noise-band ratio (Sband/Nband), crest factor, low and high band powers and power spectral density. The experimental results showed that the impedance was increased by 2.5-54.6% after six weeks of continuous usage. This increased impedance was less than 1 MΩ/cm2, as reported in the literature. The half-cell potential of the Ag-NyW textile electrode obtained was 80 mV, sufficient to acquire the ECG signal from the human body. All the fidelity parameters measured by Ag-NyW textile electrodes were correlated with standard disposable electrodes. The cardiologists validated all the measurements and confirmed that the proposed framework exhibited good performance for ECG signal acquisition from the five healthy subjects. As a result of its low-cost architecture, the proposed CardioS framework can be used in resource-constrained environments for ECG monitoring.

The Effect of Intracochlear and Intratympanic Dexamethasone on Cochlear Implant Impedance.

Objective: This study investigated the impact of different local corticosteroid applications on impedance measurements in patients with cochlear implants. Methods: The study was designed as a controlled, randomized, and prospective study in which 34 consecutive patients who had undergone cochlear implant surgery were divided into three groups. The first group received intracochlear dexamethasone, in the second group the middle ear cavity was filled with dexamethasone, and the third group did not receive dexamethasone. Intraoperative, postoperative 1st week, 1st month, 3rd month, 6th-month neural response telemetry, and impedances were measured. The measurements were compared by electrode groups representing the different regions of cochlea like basal (1-7), middle (8-13), and apical (14-22) regions. Results: The intergroup analysis showed no statistically significant differences in impedance measurements of the basal, middle, and apical regions (p>0.05). However, the impedances were lower in the two dexamethasone groups, especially in the basal and middle parts. Sixth month impedances were also lower in the dexamethasone groups. There was apparent stability in the impedance of the basal region with the intracochlear application during the first week. Conclusion: Local dexamethasone applications had a potentially positive impact on the impedance of the basal and middle regions. Patients had lower impedances than the control group during follow-up and at the endpoint. The increase in the apical region may indicate that dexamethasone was not reaching the apical zone in local applications.

Impedance trend from a symptomatic perielectrode cystic cavity following deep brain stimulation: illustrative case.

BACKGROUND: Deep brain stimulation (DBS) is a well-established neurosurgical intervention for a growing number of neurological and psychiatric diseases. Patients who are affected by Parkinson's disease may benefit from DBS of either the subthalamic nucleus or the globus pallidus internus. Patients who undergo DBS often notice a significant reduction in their clinical symptoms; however, the procedure is not without risks. Multicenter studies have reported postoperative complications such as hardware infection, intracranial hemorrhage, and perielectrode edema. OBSERVATIONS: The authors report a case of a perielectrode cyst managed conservatively. Tracking the impedance trend was a novel approach to monitor for changes within the cyst and to herald a clinical change in the patient. Perielectrode cystic formation can be a transient process that resolves spontaneously or with conservative, nonoperative management, and all diagnostic information is valuable in making clinical decisions. LESSONS: Impedance values have provided an appropriate estimation of this patient's clinical picture. The authors suggest treatment of edema and a cyst after DBS lead implantation through conservative management and observation, avoiding the removal of hardware if a patient's clinical picture is either stable or improving and forgoing additional clinical imaging if the impedance values are trending in an appropriate direction.

Characterizing the Impedance Properties of Dry E-Textile Electrodes Based on Contact Force and Perspiration.

Biopotential electrodes play an integral role within smart wearables and clothing in capturing vital signals like electrocardiogram (ECG), electromyogram (EMG), and electroencephalogram (EEG). This study focuses on dry e-textile electrodes (E1-E6) and a laser-cut knit electrode (E7), to assess their impedance characteristics under varying contact forces and moisture conditions. Synthetic perspiration was applied using a moisture management tester and impedance was measured before and after exposure, followed by a 24 h controlled drying period. Concurrently, the signal-to-noise ratio (SNR) of the dry electrode was evaluated during ECG data collection on a healthy participant. Our findings revealed that, prior to moisture exposure, the impedance of electrodes E7, E5, and E2 was below 200 ohm, dropping to below 120 ohm post-exposure. Embroidered electrodes E6 and E4 exhibited an over 25% decrease in mean impedance after moisture exposure, indicating the impact of stitch design and moisture on impedance. Following the controlled drying, certain electrodes (E1, E2, E3, and E4) experienced an over 30% increase in mean impedance. Overall, knit electrode E7, and embroidered electrodes E2 and E6, demonstrated superior performance in terms of impedance, moisture retention, and ECG signal quality, revealing promising avenues for future biopotential electrode designs.

Electrode impedances in children with cochlear implants: Comparison between intra-operative Switch ON and post-operative Switch ON.

INTRODUCTION: Intra-operative Switch ON (IOSO) is a novel clinical approach of activating the cochlear implant during the surgery adopted at our cochlear implantation center.We compared the electrode impedances in two conditions of Switch ON of cochlear implants; IOSO and post-operative Switch ON (POSO, 21st day of surgery). METHODS: Electrode impedances of 185 cochlear implants, 93 of whom received IOSO and 92 POSO, recorded over 10 years were analyzed retrospectively. RESULTS: Electrode impedances of IOSO group were significantly lower than POSO group at Switch ON and 3rd, 6th, 9th, and 12th months post cochlear implantation. In IOSO group, 3rd month's electrode impedances were high when compared to electrode impedances at Switch ON. Beyond the 3rd months, electrode impedance remained unchanged. In POSO group, there were no significant differences in electrode impedances between any measurement schedule. CONCLUSIONS: To our knowledge, this is the first study to investigate in detail the electrode impedances of the two above-said conditions of Switch ON in the process of cochlear implantation. This study concludes that timing of CI Switch ON has a significant effect on the electrode impedances. These results may affect the choice of cochlear implant Switch ON timing.

The Function of Cochlear Implant After Cardioversion in a Patient With Atrial Flutter: A Case Report.

Hearing loss in older people can cause communication impairments, decreased quality of life, social isolation, depression, and dementia. Cochlear implant surgery is an effective treatment for older patients with hearing loss who cannot achieve satisfactory audiologic outcomes with hearing aids. However, older people have an increased risk of heart disease and often take medications that affect heart rhythm. Herein, we report a case of an 80-year-old woman who underwent cardioversion at 50J after cochlear implant surgery. Electrical impedance before and after cardioversion showed only minor changes without abnormality, and the cochlear implant functioned well. We believe that the electronic circuits of the cochlear implant may have been relatively tolerant to the electrical shock from the external defibrillator. Typically, cardioversion should be avoided in cochlear implant recipients because it may damage the implant. If cardioversion cannot be avoided, we strongly recommend starting cardioversion at the lowest energy level (50 J) and removing the sound processor of the implant during the procedure.

Impedance development after implantation of hybrid-L24 cochlear implant electrodes.

OBJECTIVE: Shorter and thinner electrodes were developed for preserving residual hearing after cochlear implantation by minimising trauma. As trauma is regarded as one of the causes of fibrous tissue formation after implantation, and increase in impedance is considered to be connected to fibrous tissue formation, the aim of the current study was to evaluate impedance development after implantation of Hybrid-L electrodes. DESIGN: Impedance values were retrospectively collected from our clinical database and evaluated for all active contacts and basal, middle and apical contacts separately for up to 10 years. STUDY SAMPLES: All 137 adult patients received a Hybrid-L electrode and had to be implanted for at least 1 year. RESULTS: On average impedances increased to 13 kOhm before first fitting and dropped to 5-7 kOhm under electrical stimulation with lower values measured on apical contacts. Mean values remained stable over years, but variability increased. Values before first fitting were independent of age at implantation whereas lower values were found later in patients of higher age at implantation. CONCLUSION: Despite smaller contacts, impedance values after start of electrical stimulation were comparable to published values of Contour electrodes. This might suggest less tissue growth with the Hybrid-L electrode array.

Self-assessment of cochlear health by cochlear implant recipients.

Recent technological advances in cochlear implant (CI) telemetry have enabled, for the first time, CI users to perform cochlear health (CH) measurements through self-assessment for prolonged periods of time. This is important to better understand the influence of CH on CI outcomes, and to assess the safety and efficacy of future novel treatments for deafness that will be administered as adjunctive therapies to cochlear implantation. We evaluated the feasibility of using a CI to assess CH and examined patterns of electrode impedances, electrically-evoked compound action potentials (eCAPs) and electrocochleography (ECochGs), over time, in a group of adult CI recipients. Fifteen subjects were trained to use the Active Insertion Monitoring tablet by Advanced Bionics, at home for 12 weeks to independently record impedances twice daily, eCAPs once weekly and ECochGs daily in the first week, and weekly thereafter. Participants also completed behavioral hearing and speech assessments. Group level measurement compliance was 98.9% for impedances, 100% for eCAPs and 99.6% for ECochGs. Electrode impedances remained stable over time, with only minimal variation observed. Morning impedances were significantly higher than evening measurements, and impedances increased toward the base of the cochlea. eCAP thresholds were also highly repeatable, with all subjects showing 100% measurement consistency at, at least one electrode. Just over half of all subjects showed consistently absent thresholds at one or more electrodes, potentially suggesting the existence of cochlear dead regions. All subjects met UK NICE guidelines for cochlear implantation, so were expected to have little residual hearing. ECochG thresholds were, unsurprisingly, highly erratic and did not correlate with audiometric thresholds, though lower ECochG thresholds showed more repeatability over time than higher thresholds. We conclude that it is feasible for CI users to independently record CH measurements using their CI, and electrode impedances and eCAPs are promising measurements for objectively assessing CH.

Cochlear Implantation in Obliterated Cochlea: A Retrospective Analysis and Comparison between the IES Stiff Custom-Made Device and the Split-Array and Regular Electrodes.

Anatomical malformations, obliterations of the cochlea, or re-implantations pose particular challenges in cochlear implantation. Treatment methods rely on radiological and intraoperative findings and include incomplete insertion, the implantation of a double array, and radical cochleostomy. In addition, a stiff electrode array, e.g., the IE stiff (IES) custom-made device (CMD, MED-EL), was prescribed individually for those special cases and pre-inserted prior to facilitate cochlear implantation in challenging cases. Data on outcomes after implantation in obliterated cochleae are usually based on individual case reports since standardised procedures are lacking. A retrospective analysis was conducted to analyse our cases on obliterated cochleae treated with MED-EL devices in order to allow the different cases to be compared. Impedances and speech perception data of patients treated with the IES CMD and the double array were retrospectively compared to patients treated with a STANDARD or FLEX electrode array (the REGULAR group). Patients with a Split-Array CMD had a poor speech perception when compared to patients treated with the IES CMD device. Thus, the IES CMD can successfully be used in patients with obliterated cochleae who would otherwise be non-users, candidates for a Split-Array CMD, or candidates for partial insertion with insufficient cochlear coverage.

Cochlear Implant Electrode Impedance as Potential Biomarker for Residual Hearing.

Introduction and Objectives: Among cochlear implant candidates, an increasing number of patients are presenting with residual acoustic hearing. To monitor the postoperative course of structural and functional preservation of the cochlea, a reliable objective biomarker would be desirable. Recently, impedance telemetry has gained increasing attention in this field. The aim of this study was to investigate the postoperative course of the residual acoustic hearing and clinical impedance in patients with long electrode arrays and to explore the applicability of impedance telemetry for monitoring residual hearing. Methods: We retrospectively analyzed records of 42 cochlear implant recipients with residual hearing covering a median postoperative follow-up of 25 months with repeated simultaneous pure tone audiometry and impedance telemetry. We used a linear mixed-effects model to estimate the relation between clinical electrode impedance and residual hearing. Besides the clinical impedance, the follow-up time, side of implantation, gender, and age at implantation were included as fixed effects. An interaction term between impedance and follow-up time, as well as subject-level random intercepts and slopes, were included. Results: Loss of residual hearing occurred either during surgery or within the first 6 post-operative months. Electrode contacts inserted further apically (i.e., deeper) had higher impedances, independent of residual hearing. The highest impedances were measured 1 month postoperatively and gradually decreased over time. Basal electrodes were more likely to maintain higher impedance. Follow-up time was significantly associated with residual hearing. Regardless of the time, we found that a 1 kΩ increase in clinical impedance was associated with a 4.4 dB deterioration of residual hearing (p < 0.001). Conclusion: Pure tone audiometry is the current gold standard for monitoring postoperative residual hearing. However, the association of clinical impedances with residual hearing thresholds found in our study could potentially be exploited for objective monitoring using impedance telemetry. Further analysis including near-field related impedance components could be performed for improved specificity to local immune responses.

Comparative study of platinum electroplating to improve micro gold electrode arrays with LCP laminate.

Decoding the cellular network interaction of neurons and glial cells are important in the development of new therapies for diseases of the central nervous system (CNS). Electrophysiological in vivo studies in mice will help to understand the highly complex network. In this paper, the optimization of epidural liquid crystal polymer (LCP) electrodes for different platinum electroplating parameters are presented and compared. Constant current and pulsed current electroplating varied in strength and duration was used to decrease the electrode impedance and to increase the charge storage capacity (CSCC). In best cases, both methods generated similar results with an impedance reduction of about 99%. However, electroplating with pulsed currents was less parameter-dependent than the electroplating with constant current. The use of ultrasound was essential to generate platinum coatings without plating defects. Electrode model parameters extracted from the electrode impedance reflected the increase in surface porosity due to the electroplating processes.

ECG simulator with configurable skin-electrode impedance and artifacts emulation.

Electrocardiograms (ECG) recorded from everyday objects, such as wearables, fitness machines or smart steering wheels are becoming increasingly common. Applications are diverse and include health monitoring, athletic performance optimization, identification, authentication, and entertainment. In this study we report the design and implementation of an innovative ECG simulator, providing simulation of signal related artifacts and a dynamically adjustable skin-electrode interface model. The ECG simulator includes a unique combination of features: emulation of time dependent skin-electrode impedance, adjustable differential and common-mode interference, generation of lead-off events and analog front-end output digitalization. The skin-electrode capacitance range is 1 nF-255 nF and the resistance span is 4 kΩ-996 kΩ. System's functionality is demonstrated using a commercially available ECG front-end. The simulated SNR degradation introduced by the ECG simulator is under 0.1 dB. Results show that the skin-electrode interface can have a significant impact in the acquired waveforms. Impedance electrode imbalance, specifically of the resistive component, can generate artifacts which can be misinterpreted has arrhythmias. The proposed device can be useful for hardware and software ECG development and for training physicians and nurses to readily recognize skin-electrode impedance related artifacts.

Drug delivery in cochlear implantation.

Intra-cochlear fibrous tissue formation around the electrode following cochlear implantation affects the electrode impedance as well as electrode explantation during reimplantation surgeries. Applying corticosteroids in cochlear implantation is one way of minimizing the intra-cochlear fibrous tissue formation around the electrode. It were J. Kiefer, C. von Ilberg, and W. Gstöttner who proposed the first idea on drug delivery application in cochlear implantation to MED-EL in the year 2000. During the twenty years of translational research efforts at MED-EL in collaboration with several clinics and research institutions from across the world, preclinical safety and efficacy of corticosteroids were performed leading to the final formulation of the electrode design. In parallel to the drug eluting CI electrode development, MED-EL also invested research efforts into developing tools enabling delivery of pharmaceutical agents of surgeon's choice inside the cochlea. The inner ear catheter designed to administer drug substances into the cochlea was CE marked in 2020. A feasibility study in human subjects with MED-EL CI featuring dexamethasone-eluting electrode array started in June 2020. This article covers the milestones of translational research towards the drug delivery in CI application that took place in association with MED-EL.

A Novel Wearable Flexible Dry Electrode Based on Cowhide for ECG Measurement.

The electrocardiogram (ECG) electrode, as a sensor, is an important part of the wearable ECG monitoring device. Natural leather is rarely used as the electrode substrate. In this paper, wearable flexible silver electrodes based on cowhide were prepared by sputtering and brush-painting. A signal generator, oscilloscope, impedance test instrument, and ECG monitor were used to build the test platform evaluating the performance of electrodes with six subjects. The lossless waveform transmission can be achieved with our electrodes. Therefore, the Pearson's correlation coefficient calculated with input waveform and output waveform of the electrodes based on the top grain layer (GLE) and the split layer (SLE) of cowhide were 0.997 and 0.998 at 0.1 Hz respectively. The skin electrode impedance (Z) was tested, and the parameters of the equivalent circuit model of the skin electrode interface were calculated by a fitting method, indicating that the Z of the prepared electrodes was comparable with the standard gel electrode when the skin is moist enough. The signal-to-noise ratio of the ECG of the GLE and the SLE were 1.148 and 1.205 times that of the standard electrode in the standing posture, which meant the ECG measured by our electrodes was basically consistent with that measured by the standard electrode.

Towards real-life EEG applications: novel superporous hydrogel-based semi-dry EEG electrodes enabling automatically 'charge-discharge' electrolyte.

Objective.A novel polyacrylamide/polyvinyl alcohol superporous hydrogel (PAAm/PVA SPH)-based semi-dry electrode was constructed for capturing electroencephalogram (EEG) signals at the hairy scalp, showing automatically 'charge-discharge' electrolyte concept in EEG electrode development.Approach.In this regard, PAAm/PVA SPH was polymerizedin-situin the hollow electrode cavity by freezing polymerization, which acted as a dynamic reservoir of electrolyte fluid. The SPH can be completely 'charged' with electrolyte fluid, such as saline, in just a few seconds and can be 'discharged' through a few tiny pillars into the scalp at a desirable rate. In this way, an ideal local skin hydration effect was achieved at electrode-skin contact sites, facilitating the bioelectrical signal pathway and significantly reducing electrode-skin impedance. Moreover, the electrode interface effectively avoids short circuit and inconvenient issues.Main results.The results show that the semi-dry electrode displayed low and stable contact impedance, showing non-polarization properties with low off-set potential and negligible potential drift. The average temporal cross-correlation coefficient between the semi-dry and conventional wet electrodes was 0.941. Frequency spectra also showed almost identical responses with anticipated neural electrophysiology responses.Significance.Considering prominent advantages such as a rapid setup, robust signal, and user-friendliness, the new concept of semi-dry electrodes shows excellent potential in emerging real-life EEG applications.