Spin-wave dynamics in perpendicularly magnetized antidot multilayers.

Using all-optical time-resolved magneto-optical Kerr effect measurements we demonstrate an efficient modulation of the spin-wave (SW) dynamics via the bias magnetic field orientation around nanoscale diamond shaped antidots that are arranged on a square lattice within a [Co(0.75 nm)/Pd(0.9 nm)]8multilayer with perpendicular magnetic anisotropy (PMA). Micromagnetic modeling of the experimental results reveals that the SW modes in the lower frequency regime are related to narrow shell regions around the antidots, where in-plane (IP) domain structures are formed due to the reduced PMA, caused by Ga+ion irradiation during the focused ion beam milling process of antidot fabrication. The IP direction of the shell magnetization undergoes a striking change with magnetic field orientation, leading to the sharp variation of the edge localized (shell) SW modes. Nevertheless, the coupling between such edge localized and bulk SWs for different orientations of bias field in PMA systems gives rise to interesting Physics and attests to new prospects for developing energy efficient and hybrid-system-based next-generation nanoscale magnonic devices.

Enhanced Ferromagnetism and Tunable Magnetic Anisotropy in a van der Waals Ferromagnet.

2D van der Waals (vdW) magnets have recently emerged as a promising material system for spintronic device innovations due to their intriguing phenomena in the reduced dimension and simple integration of magnetic heterostructures without the restriction of lattice matching. However, it is still challenging to realize Curie temperature far above room temperature and controllable magnetic anisotropy for spintronics application in 2D vdW magnetic materials. In this work, the pressure-tuned dome-like ferromagnetic-paramagnetic phase diagram in an iron-based 2D layered ferromagnet Fe3GaTe2 is reported. Continuously tunable magnetic anisotropy from out-of-plane to in-plane direction is achieved via the application of pressure. Such behavior is attributed to the competition between intralayer and interlayer exchange interactions and enhanced DOS near the Fermi level. The study presents the prominent properties of pressure-engineered 2D ferromagnetic materials, which can be used in the next-generation spintronic devices.

Control of Anisotropy and Magnetic Hyperthermia Effect by Addition of Cobalt on Magnetite Nanoparticles.

Magnetic hyperthermia (MH) has emerged as a promising technology with diverse applications in medical and technological fields, leveraging the remote induction of temperature elevation through an alternating magnetic field. While Fe3O4 nanoparticles with an average size around 12-25 nm are commonly employed in MH systems, this study introduces a strategy to produce smaller particles (less than or equal to 10 nm) with enhanced heating efficiency, as measured by specific power absorption (SPA). We conducted an exhaustive and detailed investigation into the morphological and magnetic properties of CoxFe3-xO4 nanoparticles, aiming to optimize their MH response. By varying the Co content, we successfully tuned the effective magnetic anisotropy while maintaining saturation magnetization nearly constant. The MH analysis indicates that these nanoparticles predominantly heat through the Néel mechanism, demonstrating robust reproducibility across different concentrations, viscosity mediums, and ac field conditions. Notably, we identified an optimal anisotropy or Co concentration that maximizes SPA, crucial for developing magnetic systems requiring particles with specific sizes. This work contributes to advancing the understanding and application of MH, particularly in tailoring nanoparticle properties for targeted and efficient heat generation in various contexts.

The Use of External Fields (Magnetic, Electric, and Strain) in Molecular Beam Epitaxy-The Method and Application Examples.

Molecular beam epitaxy (MBE) is a powerful tool in modern technologies, including electronic, optoelectronic, spintronic, and sensoric applications. The primary factor determining epitaxial heterostructure properties is the growth mode and the resulting atomic structure and microstructure. In this paper, we present a novel method for growing epitaxial layers and nanostructures with specific and optimized structural and magnetic properties by assisting the MBE process using electromagnetic and mechanical external stimuli: an electric field (EF), a magnetic field (MF), and a strain field (SF). The transmission of the external fields to the sample is realized using a system of specialized sample holders, advanced transfers, and dedicated manipulators. Examples of applications include the influence of MFs on the growth and anisotropy of epitaxial magnetite and iron films, the use of EFs for in situ resistivity measurements, the realization of in situ magneto-optic measurements, and the application of SFs to the structural modification of metal films on mica.

On the origin of magnetic anisotropy in 4f -free ferromagnets based on the CaCu5 structure.

Using first-principles calculations, we investigate the origin of magnetocrystalline anisotropy in a series of 4f -electron-free intermetallics with CaCu5-based structures: YCo5, YCo4B, and Y3Co13B2. The electronic structure of these compounds is characterized by a set of narrow 3d-bands near the Fermi level. In YCo5 the easy-axis anisotropy originates primarily in the spin-orbit coupling-induced mixing of the electronic states with Co dx2-y2 and dxy character. The analysis of k-resolved anisotropy shows that positive contributions accumulate from the entire Brillouin zone but are particularly large near the kz = 0 plane. The analysis of the single-site and two-site terms reveals a large positive single-site contribution to the mag- netocrystalline anisotropy from the Co atoms on the honeycomb sublattice, along with two-site contributions from both honeycomb and kagome sublattices.

Magnetic irreversibility and magnetization processes in Ni5Al3/NiO core/shell nanoparticle system.

This work brings out many interesting facets of magnetism in the Ni5Al3/NiO core/shell nanoparticle system. The weak and strong magnetic irreversibility lines (TWI(H) and TSI(H)) reproduce the previously reported H - T phase diagram at fields H ≤ 30 Oe, but strong departures occur for H > 30 Oe. Comparison with the theoretically predicted H - T phase diagram allows us to identify TWIwith TCG+SG, where the paramagnetic (PM)-chiral glass (CG) and PM-spin glass (SG) phase transitions occur simultaneously, and TSIwith TSG, the temperature at which transition to the replica symmetry breaking SG state takes place. The TSI(H) transition line abruptly ends at the point (H ≃ 30 Oe, T ≃ 90 K). As H exceeds 30 Oe, a new transition appears, which gets completely suppressed at fields H > 1 kOe, where the magnetic irreversibility ceases to exist. No intrinsic long-range ferromagnetic ordering exists, but fields as low as 3 kOe suffice to induce long-range ferromagnetic order. At fixed temperatures, the magnetocrystalline anisotropy fluctuations essentially govern the 'approach-to-saturation' in magnetization for fields in the range 3 - 70 kOe. The present nanocrystalline system behaves as an isotropic system with a random easy axis in which the magnetization reversal occurs through the coherent rotation of the magnetizations of weakly-interacting single-domain Ni5Al3particles. Saturation magnetization, like M(T) at H ≥ 2 kOe, exhibits an anomalous upturn at temperatures below ≈ 30 K. This upturn is associated with the anomalous softening of spin-wave modes, which results in the thermal excitation of a large number of non-equilibrium (finite lifetime) magnons. At sub-Kelvin temperatures, these magnons undergo Bose-Einstein condensation. .

Elevating the Performance of Heterometallic 3d/4f SMMs: The Role of Diamagnetic CoIII and ZnII Ions in Magnetization Dynamics.

Recent advances in the synthesis of 3d/4f Single-Molecule Magnets (SMMs) have revealed the effective role of incorporating diamagnetic CoIII or ZnII ions to enhance the magnetic properties of LnIII ions. This concept highlights notable examples of CoIII/LnIII and ZnII/LnIII SMMs documented in the recent literature, illustrating how the selection of various peripheral and/or bridging ligands can modulate the magnetic anisotropy of 4f metal ions, thereby increasing their energy barriers.

Theoretical Study of Microwires with an Inhomogeneous Magnetic Structure Using Magnetoimpedance Tomography.

The recently proposed magnetoimpedance tomography method is based on the analysis of the frequency dependences of the impedance measured at different external magnetic fields. The method allows one to analyze the distribution of magnetic properties over the cross-section of the ferromagnetic conductor. Here, we describe the example of theoretical study of the magnetoimpedance effect in an amorphous microwire with inhomogeneous magnetic structure. In the framework of the proposed model, it is assumed that the microwire cross-section consists of several regions with different features of the effective anisotropy. The distribution of the electromagnetic fields and the microwire impedance are found by an analytical solution of Maxwell equations in the particular regions. The field and frequency dependences of the microwire impedance are analyzed taking into account the frequency dependence of the permeability values in the considered regions. Although the calculations are given for the case of amorphous microwires, the obtained results can be useful for the development of the magnetoimpedance tomography method adaptation for different types of ferromagnetic conductors.

Field-Free Manipulation of Two-Dimensional Ferromagnet CrTe2 by Spin-Orbit Torques.

Electrical manipulation of magnetic states in two-dimensional ferromagnetic systems is crucial in information storage and low-dimensional spintronics. Spin-orbit torque presents a rapid and energy-efficient method for electrical control of the magnetization. In this letter, we demonstrate a wafer-scale spin-orbit torque switching of two-dimensional ferromagnetic states. Using molecular beam epitaxy, we fabricate two-dimensional heterostructures composed of low crystal-symmetry WTe2 and ferromagnet CrTe2 with perpendicular anisotropy. By utilizing out-of-plane spins generated from WTe2, we achieve field-free switching of the CrTe2 perpendicular magnetization. The threshold switching current density in CrTe2/WTe2 is 1.2 × 106 A/cm2, 20 times smaller than that of the CrTe2/Pt control sample even with an external magnetic field. In addition, the switching behavior can be modulated by external magnetic fields and crystal symmetry. Our findings demonstrate a controllable and all-electric manipulation of perpendicular magnetization in a two-dimensional ferromagnet, representing a significant advancement toward the practical implementation of low-dimensional spintronic devices.

Single-Phase L10-Ordered High Entropy Thin Films with High Magnetic Anisotropy.

The vast high entropy alloy (HEA) composition space is promising for discovery of new material phases with unique properties. This study explores the potential to achieve rare-earth-free high magnetic anisotropy materials in single-phase HEA thin films. Thin films of FeCoNiMnCu sputtered on thermally oxidized Si/SiO2 substrates at room temperature are magnetically soft, with a coercivity on the order of 10 Oe. After post-deposition rapid thermal annealing (RTA), the films exhibit a single face-centered-cubic phase, with an almost 40-fold increase in coercivity. Inclusion of 50 at.% Pt in the film leads to ordering of a single L10 high entropy intermetallic phase after RTA, along with high magnetic anisotropy and 3 orders of magnitude coercivity increase. These results demonstrate a promising HEA approach to achieve high magnetic anisotropy materials using RTA.

Dimensionality Engineering of Magnetic Anisotropy from the Anomalous Hall Effect in Synthetic SrRuO3 Crystals.

Magnetic anisotropy in atomically thin correlated heterostructures is essential for exploring quantum magnetic phases for next-generation spintronics. Whereas previous studies have mostly focused on van der Waals systems, here we investigate the impact of dimensionality of epitaxially grown correlated oxides down to the monolayer limit on structural, magnetic, and orbital anisotropies. By designing oxide superlattices with a correlated ferromagnetic SrRuO3 and nonmagnetic SrTiO3 layers, we observed modulated ferromagnetic behavior with the change of the SrRuO3 thickness. Especially, for three-unit-cell-thick layers, we observe a significant 1500% improvement of the coercive field in the anomalous Hall effect, which cannot be solely attributed to the dimensional crossover in ferromagnetism. The atomic-scale heterostructures further reveal the systematic modulation of anisotropy for the lattice structure and orbital hybridization, explaining the enhanced magnetic anisotropy. Our findings provide valuable insights into engineering the anisotropic hybridization of synthetic magnetic crystals, offering a tunable spin order for various applications.

Unusual Dzyaloshinskii-Moriya Interaction in Graphene/Fe3GeTe2 Van der Waals Heterostructure.

Dzyaloshinskii-Moriya interaction (DMI) is shown to induce a topologically protected chiral spin texture in magnetic/nonmagnetic heterostructures. In the context of van der Waals spintronic devices, graphene emerges as an excellent candidate material. However, due to its negligible spin-orbit interaction, inducing DMI to stabilize topological spins when coupled to 3d-ferromagnets remains challenging. Here, it is demonstrated that, despite these challenges, a sizeable Rashba-type spin splitting followed by significant DMI is induced in graphene/Fe3GeTe2. This is made possible due to an interfacial electric field driven by charge asymmetry together with the broken inversion symmetry of the heterostructure. These findings reveal that the enhanced DMI energy parameter, resulting from a large effective electron mass in Fe3GeTe2, remarkably contributes to stabilizing non-collinear spins below the Curie temperature, overcoming the magnetic anisotropy energy. These results are supported by the topological Hall effect, which coexists with the non-trivial breakdown of Fermi liquid behavior, confirming the interplay between spins and non-trivial topology. This work paves the way toward the design and control of interface-driven skyrmion-based devices.

Six-Coordinated CoII Single-Molecule Magnets: Synthetic Strategy, Structure and Magnetic Properties.

The pursuit of molecule-based magnetic memory materials contributes significantly to high-density information storage research in the frame of the ongoing information technologies revolution. Remarkable progress has been achieved in both transition metal (TM) and lanthanide based single-molecule magnets (SMMs). Notably, six-coordinated CoII SMMs hold particular research significance owing to the economic and abundant nature of 3d TM ions compared to lanthanide ions, the substantial spin-orbit coupling of CoII ions, the potential for precise control over coordination geometry, and the air-stability of coordination-saturated structures. In this review, we will summarize the progress made in six-coordinated CoII SMMs, organized by their coordination geometry and molecular structure similarity. Valuable insights, principles, and new mechanism gleaned from this research and remaining issues that need to be addressed will also be discussed to guide future optimization.

Levamisole Based Co(II) Single-Ion Magnet.

A new Co(II) complex, [Co(NCS)2(L)2] (1) has been synthesized based on levamisole (L) as a new ligand. Single-crystal X-ray diffraction analyses confirm that the Co(II) ion is having a distorted tetrahedral coordination geometry in the complex. Notably strong intramolecular S⋅⋅⋅S and S⋅⋅⋅N interactions has been confirmed by employing Quantum Theory of Atoms in Molecules (QTAIM). These intramolecular interactions occur among the sulfur and nitrogen atoms of the levamisole ligands and also the nitrogen atoms of the thiocyanate. Direct current (dc) magnetic analyses reveal presence of zero field splitting (ZFS) and large magnetic anisotropy on Co(II). Detailed ab initio ligand field theory calculations quantitatively predicted the magnitude of ZFS. Prominent field-induced single-ion magnet (SIM) behavior was observed for 1 from dynamic magnetization measurements. Slow magnetic relaxation follows an Orbach mechanism with the effective energy barrier Ueff=29.6 (7) K and relaxation time τo=1.4 (4)×10-9 s.

Electrical Control Grain Dimensionality with Multilevel Magnetic Anisotropy.

In alignment with the increasing demand for larger storage capacity and longer data retention, the electrical control of magnetic anisotropy has been a research focus in the realm of spintronics. Typically, magnetic anisotropy is determined by grain dimensionality, which is set during the fabrication of magnetic thin films. Despite the intrinsic correlation between magnetic anisotropy and grain dimensionality, there is a lack of experimental evidence for electrically controlling grain dimensionality, thereby impairing the efficiency of magnetic anisotropy modulation. Here, we demonstrate an electric field control of grain dimensionality and prove it as the active mechanism for tuning interfacial magnetism. The reduction in grain dimensionality is associated with a transition from ferromagnetic to superparamagnetic behavior. We achieve a nonvolatile and reversible modulation of the coercivity in both the ferromagnetic and superparamagnetic regimes. Subsequent electrical and elemental analysis confirms the variation in grain dimensionality upon the application of gate voltages, revealing a transition from a multidomain to a single-domain state, accompanied by a reduction in grain dimensionality. Furthermore, we exploit the influence of grain dimensionality on domain wall motion, extending its applicability to multilevel magnetic memory and synaptic devices. Our results provide a strategy for tuning interfacial magnetism through grain size engineering for advancements in high-performance spintronics.

The Success of Fabrication of Pure SmFe2 Phase Film with Outstanding Perpendicular Magnetic Anisotropy.

This study used DC magnetron sputtering technology to fabricate Sm-Fe films and systematically investigated the phase transition behavior of Sm-Fe films with different Fe ratios. It was found that at higher Fe content, the films consisted of Sm2Fe17 or SmFe7 phases; as Fe content decreased, the films were mainly composed of SmFe3 or SmFe2 phases; at higher Sm content, the films primarily consisted of Sm phase. Sm is prone to volatilization at high temperatures, so Ta was used as a capping layer to effectively suppress Sm volatilization, successfully synthesizing pure SmFe2 phase films at a nearly 1:2 ratio. The magnetic properties and magnetostrictive behavior of the SmFe2 films were investigated, revealing that pure-phase SmFe2 films exhibit good perpendicular magnetic anisotropy and magnetostriction properties. The larger stress along the perpendicular-to-film direction, resulting from the absence of substrate-induced constraints, contributes to the excellent perpendicular magnetic anisotropy of the films. This study successfully synthesized pure-phase SmFe2 films and discovered a new method for fabricating perpendicularly anisotropic films. The research findings are of great significance for the efficient synthesis of desired films with high phase formation temperatures containing volatile elements.

Study on Anomalous Hall Effect and Spin-Orbit Torque Effect of TbCo-Based Multilayer Films.

The anomalous Hall effect and spin-orbit torque of TbCo-based multilayer films have been methodically studied in recent years. Many properties of the films can be obtained by the anomalous Hall resistance loops of the samples. We report on the effects of a structure composed of two heavy metals as the buffer layers on the anomalous Hall resistance loops of TbCo-based multilayers at different temperatures. The results showed that the coercivity increases dramatically with decreasing temperature, and the samples without perpendicular magnetic anisotropy at room temperature showed perpendicular magnetic anisotropy at low temperatures. We quantified the spin-orbit torque efficiency and Dzyaloshinskii-Moriya interaction effective field size of the films W/Pt/TbCo/Pt at room temperature by measuring the loop shift of anomalous Hall resistance. The results showed that the study of anomalous Hall resistance loops plays an important role in the study of spintronics, which can not only show the basic properties of the sample, but can also obtain other information about the sample through the shift of the loops.

Wide Linearity Range 3D Magnetic Sensor and Angular Position Detector Based on a Single FePt Spin-Orbit Torque Device.

Three-dimensional (3D) vector magnetic sensors play a significant role in a variety of industries, especially in the automotive industry, which enables the control of precise position, angle, and rotation of motion elements. Traditional 3D magnetic sensors integrate multiple sensors with their sensing orientations along the three coordinate axes, leading to a large size and inevitable nonorthogonal misalignment. Here, we demonstrate a wide linearity range 3D magnetic sensor utilizing a single L10-FePt Hall-bar device, whose sensitivity is 291 VA-1 T-1 in the z-axis and 27 VA-1 T-1 in the in-plane axis. Based on the spin-orbit torque-dominated magnetization reversal, the linear response of anomalous Hall resistance within a large linear range (±200 Oe) for the x, y, and z components of magnetic fields has been obtained, respectively. Typically, it exhibits a relatively lower magnetic noise level of 7.9 nV at 1 Hz than previous results, improving measurement resolution at the low frequency. Furthermore, we provide a straightforward approach for noncontact angular position detection based on a single Hall-bar device, which shows great potential for application in rotational motion control.

Temperature Induced Reversible Switching of the Magnetic Anisotropy in a Neodymium Complex Adsorbed on Graphite.

Controlling the magnetic anisotropy of molecular layers assembled on a surface is one of the challenges that needs to be addressed to create the next-generation spintronic devices. Recently, metal complexes that show a reversible solid-state switch of their magnetic anisotropy in response to physical stimuli, such as temperature and magnetic field, have been discovered. The complex Nd(trensal) (H3trensal = 2,2',2''-tris(salicylideneimino)triethylamine) is predicted to exhibit such property. An ultra-thin film of Nd(trensal) is deposited on highly ordered pyrolytic graphite as a proof-of-concept system to show that this property can be retained at the nanoscale on a layered material. By combining single crystal magnetometric measurements and synchrotron X-ray-based absorption techniques, supported by multiplet ligand field simulations based on the trigonal crystal field surrounding the lanthanide centre, it is demonstrated that changing the temperature reverses the magnetic anisotropy of an ordered film of Nd(trensal), thus opening significant perspectives for the realization of a novel family of temperature-controlled molecular spintronic devices.

Imaging the Magnetic Anisotropy in Ultrathin Fe4GeTe2 with a Nitrogen-Vacancy Magnetometer.

Two-dimensional (2D) FenGeTe2, with n = 3, 4, and 5, has been realized in experiments, showing strong magnetic anisotropy with enhanced critical temperature (Tc). The understanding of its magnetic anisotropy is crucial for the exploration of more stable 2D magnets and its spintronic applications. Here, we report a quantitative reconstruction of the magnetization magnitude and its direction in ultrathin Fe4GeTe2 using nitrogen vacancy centers. Through imaging stray magnetic fields, we identified the spin-flop transition at approximately 80 K, resulting in a change of the easy axis from the out-of-plane direction to the in-plane direction. Moreover, by analyzing the thermally activated escape behavior of the magnetization near Tc in terms of the Ginzburg-Landau model, we observed the in-plane magnetic anisotropy effect and the formation capability of magnetic domains at ∼0.4 µm2 µT-1. Our findings contribute to the quantitative understanding of the magnetic anisotropy effect in a vast range of 2D van der Waals magnets.