Pathways of inhibition of filamentous sludge bulking by slowly biodegradable organic compounds.

The organic compound composition of wastewater, serves as a crucial indicator for the operational performance of activated sludge processes and has a major influence on the development of filamentous bulking in activated sludge. This study focused on the impact of typical soluble and slowly-biodegradable organic compounds, investigating the pathways through which these substrates affect the occurrence of filamentous bulking in systems operated under both high- and low-oxygen conditions. Results showed that slowly-biodegradable organic compounds lead to a concentrated distribution of microorganisms within flocs, with inward growth of filamentous bacteria. Both Tween-80 and granular starch treated systems exhibited a significant increase in protein content. The glucose system, utilizing soluble substrates, exhibited a markedly higher total polysaccharide content. Microbial communities in the Tween-80 and granular starch treated systems were characterized by a higher abundance of bacteria known to enhance sludge flocculation and settling, such as Competibacter, Xanthomonadaceae and Zoogloea. These findings are of high significance for controlling the operational performance and stability of activated sludge systems, deepening our understanding and providing a novel perspective for the improvement of wastewater treatment processes.

Enhanced VOC emission with increased temperature contributes to the shift of O3-precursors relationship and optimal control strategy.

Assessing the impact of anthropogenic volatile organic compounds (VOCs) on ozone (O3) formation is vital for the management of emission reduction and pollution control. Continuous measurement of O3 and the major precursors was conducted in a typical light industrial city in the YRD region from 1 May to 25 July in 2021. Alkanes were the most abundant VOC group, contributing to 55.0% of TVOCs concentration (56.43 ± 21.10 ppb). OVOCs, aromatics, halides, alkenes, and alkynes contributed 18.7%, 9.6%, 9.3%, 5.2% and 1.9%, respectively. The observational site shifted from a typical VOC control regime to a mixed regime from May to July, which can be explained by the significant increase of ROx production, resulting in the transition of environment from NOx saturation to radical saturation with respect to O3 production. The optimal O3 control strategy should be dynamically changed depending on the transition of control regime. Under NOx saturation condition, minimizing the proportion of NOx in reduction could lead to better achievement of O3 alleviation. Under mixed control regime, the cut percentage gets the top priority for the effectiveness of O3 control. Five VOCs sources were identified: temperature dependent source (28.1%), vehicular exhausts (19.9%), petrochemical industries (7.2%), solvent & gasoline usage (32.3%) and manufacturing industries (12.6%). The increase of temperature and radiation would enhance the evaporation related VOC emissions, resulting in the increase of VOC concentration and the change of ROx circulation. Our results highlight determination of the optimal control strategies for O3 pollution in a typical YRD industrial city.

A comparative study on the formation of nitrogen-containing organic compounds in cloud droplets and aerosol particles.

Nitrogen-containing organic compounds (NOCs) may potentially contribute to aqueous secondary organic aerosols, yet the different formation of NOCs in aerosol particles and cloud droplets remains unclear. With the in-situ measurements performed at a mountain site (1690 m a.s.l.) in southern China, we investigated the formation of NOCs in the cloud droplets and the cloud-free particles, based on their mixing state information of NOCs-containing particles by single particle mass spectrometry. The relative abundance of NOCs in the cloud-free particles was significantly higher than those in cloud residual (cloud RES) particles. NOCs were highly correlated with carbonyl compounds (including glyoxalate and methylglyoxal) in the cloud-free particles, however, limited correlation was observed for cloud RES particles. Analysis of their mixing state and temporal variations highlights that NOCs was mainly formed from the carbonyl compounds and ammonium in the cloud-free particles, rather than in the cloud RES particles. The results support that the formation of NOCs from carbonyl compounds is facilitated in concentrated solutions in wet aerosols, rather than cloud droplets. In addition, we have identified the transport of biomass burning particles that facilitate the formation of NOCs, and that the observed NOCs is most likely contributed to the light absorption. These findings have implications for the evaluation of NOCs formation and their contribution to light absorption.

Chemical characteristics and sources apportionment of volatile organic compounds in the primary urban area of Shijiazhuang, North China Plain.

VOCs (Volatile organic compounds) exert a vital role in ozone and secondary organic aerosol production, necessitating investigations into their concentration, chemical characteristics, and source apportionment for the effective implementation of measures aimed at preventing and controlling atmospheric pollution. From July to October 2020, online monitoring was conducted in the main urban area of Shijiazhuang to collect data on VOCs and analyze their concentrations and reactivity. Additionally, the PMF (positive matrix factorization) method was utilized to identify the VOCs sources. Results indicated that the TVOCs (total VOCs) concentration was (96.7 ± 63.4 µg/m3), with alkanes exhibiting the highest concentration of (36.1 ± 26.4 µg/m3), followed by OVOCs (16.4 ± 14.4 µg/m3). The key active components were alkenes and aromatics, among which xylene, propylene, toluene, propionaldehyde, acetaldehyde, ethylene, and styrene played crucial roles as reactive species. The sources derived from PMF analysis encompassed vehicle emissions, solvent and coating sources, combustion sources, industrial emissions sources, as well as plant sources, the contribution of which were 37.80%, 27.93%, 16.57%, 15.24%, and 2.46%, respectively. Hence, reducing vehicular exhaust emissions and encouraging neighboring industries to adopt low-volatile organic solvents and coatings should be prioritized to mitigate VOCs levels.

Emission characteristics of biogenic volatile organic compounds in a subtropical pristine forest of southern China.

Emission characteristics of biogenic volatile organic compounds (BVOCs) from dominant tree species in the subtropical pristine forests of China are extremely limited. Here we conducted in situ field measurements of BVOCs emissions from representative mature evergreen trees by using dynamic branch enclosures at four altitude gradients (600-1690 m a.s.l.) in the Nanling Mountains of southern China. Composition characteristics as well as seasonal and altitudinal variations were analyzed. Standardized emission rates and canopy-scale emission factors were then calculated. Results showed that BVOCs emission intensities in the wet season were generally higher than those in the dry season. Monoterpenes were the dominant BVOCs emitted from most broad-leaved trees, accounting for over 70% of the total. Schima superba, Yushania basihirsuta and Altingia chinensis had relatively high emission intensities and secondary pollutant formation potentials. The localized emission factors of isoprene were comparable to the defaults in the Model of Emissions of Gases and Aerosols from Nature (MEGAN), while emission factors of monoterpenes and sesquiterpenes were 2 to 58 times of those in the model. Our results can be used to update the current BVOCs emission inventory in MEGAN, thereby reducing the uncertainties of BVOCs emission estimations in forested regions of southern China.

Emission characteristics and probabilistic health risk of volatile organic compounds from leather sofa.

Furniture is identified as a vital volatile organic compound (VOC) emission source in the indoor environment. Leather has become the most common raw and auxiliary fabric material for upholstered furniture, particularly with extensive consumption in sofas, due to its abundant resources and efficient functions. Despite being widely traded across the world, little research has been conducted on the VOCs released by leather materials and their health risk assessment in the indoor environment. Accordingly, this study investigated the VOC emissions of leather with different grades and the health risk of the inhalation exposure. Based on the ultra-fast gas phase electronic nose (EN) and GC-FID/Qtof, the substantial emissions of aliphatic aldehyde ketones (Aks), particularly hexanal, appear to be the cause of off-flavor in medium and low grade (MG and LG) sofa leathers. The health risk assessment indicated that leather materials barely pose non-carcinogenic and carcinogenic effects to residents. Given the abundance of VOC sources and the accumulation of health risks in the indoor environment, more stringent specifications concerning qualitative and quantitative content should be extended to provide VOC treatment basic for the manufacturing industry and obtain better indoor air quality.

Multiple-Yolk-Shell NiO Microspheres for Selective Detection of m-Xylene.

m-Xylene is a volatile organic compound that is extensively used in various industrial processes. It is toxic, posing significant risks to human health and the environment. Therefore, developing gas sensors with high sensitivity and selectivity for m-xylene detection is critical. In this work, we demonstrated the synthesis of NiO-yolk double-shell (NiO-YDS) and NiO-yolk triple-shell (NiO-YTS) derived from NiO/Ni-BTC and NiO/Ni-PTA composites, respectively, using the microwave-assisted solvothermal method from Ni-BTC-derived NiO spheres. The NiO/Ni-BTC composite has trimesic acid (H3BTC) as an organic linker, while NiO/Ni-PTA has p-terephthalic acid (PTA). We investigated the sensing properties of these materials for 2-butanone, 2-nonanone, 3-methyl-1-butanol, acetone, benzene, ethanol, methanol, and m-xylene. These composites exhibited excellent sensitivity and selectivity for detecting m-xylene under dry conditions. Specifically, the NiO-YTS sensor showed a sensitivity of 217.5% to m-xylene, while the NiO-YDS sensor demonstrated a sensitivity of 179.8% at 350 °C in dry air. We emphasize the NiO-YTS composite due to its superior sensitivity and selectivity in detecting m-xylene compared with the NiO-YDS composite. The NiO-YTS sensor exhibited stable and reproducible sensing performance for 100 ppm of m-xylene under optimum working conditions, with a theoretical detection limit of 5.43 ppb and relatively fast response time (89 s) and recovery time (191 s). This work describes an easy method for synthesizing NiO-YDS and NiO-YTS derived from NiO/Ni-BTC and NiO/Ni-PTA composites. It demonstrates that these composites represent a new class of materials that can potentially enhance the sensitivity and selectivity of m-xylene gas sensors.

Lung Function Impairment Among Paint Factory Workers: A Cross-Sectional Analytical Study.

BACKGROUND: A paint factory or manufacturing is a vocation characterized by exposure to chemical hazards during production. Paint exposure plays a great role in the incidence of several health problems, particularly respiratory diseases. The study aims to assess the pattern of spirometric indices among the study population. METHODS: This cross-sectional study of paint factory workers (PFWs) assesses their spirometric findings in Delta State, Nigeria. The participants for this study were divided into two groups; the PFWs and the non-PFWs (NPFW) which serve as the control group. Hundred and 200 participants were recruited for the study group and control, respectively. RESULTS: Among the participants in the paint worker cohort, 45 individuals (45.0%) had been employed for less than five years while 14 (14.0%) had worked over 10 years. Eighty-eight (88%) are aware of PPE; however, only 12 (12.0%) use them always. Findings show that 178 (89.0%) vs. seven (7.0%) of NPFW and PFW had normal pulmonary function tests. The spirometric abnormalities within the PFW group were obstructive lung disease affecting 59 (59.0%) of the cohort while 34 (34.0%) had restrictive lung patterns. CONCLUSION: Exposure to volatile organic compounds (VOCs) emitted from paint fumes is associated with spirometric abnormalities with obstructive patterns more predominant than restrictive patterns.

Cracking the plant VOC sensing code and its practical applications.

Volatile organic compounds (VOCs) are essential airborne mediators of interactions between plants. These plant-plant interactions require sophisticated VOC-sensing mechanisms that enable plants to regulate their defenses against pests. However, these interactions are not limited to specific plants or even conspecifics, and can function in very flexible interactions between plants. Sensing and responding to VOCs in plants is finely controlled by their uptake and transport systems as well as by cellular signaling via, for example, chromatin remodeling system-based transcriptional regulation for defense gene activation. Based on the accumulated knowledge about the interactions between plants and their major VOCs, companion plants and biostimulants are being developed for practical applications in agricultural and horticultural pest control, providing a sustainable alternative to harmful chemicals.

Integrating Real-Time Air Quality Monitoring, Ecological Momentary Assessment, and Spirometry to Evaluate Asthma Symptoms: Usability Study.

BACKGROUND: Individuals are exposed to a variety of indoor residential toxins including volatile organic compounds and particulates. In adults with asthma, such exposures are associated with asthma symptoms, asthma exacerbations, and decreased lung function. However, data on these exposures and asthma-related outcomes are generally collected at different times and not in real time. The integration of multiple platforms to collect real-time data on environmental exposure, asthma symptoms, and lung function has rarely been explored. OBJECTIVE: This paper describes how adults with asthma perceive the acceptability and usability of three integrated devices: (1) residential indoor air quality monitor, (2) ecological momentary assessment (EMA) surveys delivered via a smartphone app, and (3) home spirometry, over 14 days. METHODS: Participants (N=40) with uncontrolled asthma were mailed the Awair Omni indoor air quality monitor, ZEPHYRx home spirometer, and detailed instructions required for the in-home monitoring. The air quality monitor, spirometer, and EMA app were set up and tested during a videoconference or phone orientation with a research team member. Midway through the 14-day data collection period, participants completed an interview about the acceptability of the study devices or apps, instructional materials provided, and the setup process. At the end of the 14-day data collection period, participants completed a modified System Usability Scale. A random sample of 20 participants also completed a phone interview regarding the acceptability of the study and the impact of the study on their asthma. RESULTS: Participants ranged in age from 26 to 77 (mean 45, SD 13.5) years and were primarily female (n=36, 90%), White (n=26, 67%), college graduates (n=25, 66%), and residing in a single-family home (n=30, 75%). Most indicated that the air quality monitor (n=23, 58%), the EMA (n=20, 50%), and the spirometer (n=17, 43%) were easy to set up and use. Challenges with the EMA included repetitive surveys, surveys arriving during the night, and technical issues. While the home spirometer was identified as a plausible means to evaluate lung function in real time, the interpretation of the readings was unclear, and several participants reported side effects from home spirometer use. Overall, the acceptability of the study and the System Usability Scale scores were high. CONCLUSIONS: The study devices were highly acceptable and usable. Participant feedback was instrumental in identifying technical challenges that should be addressed in future studies.

In-situ online investigation of biogenic volatile organic compounds emissions from tropical rainforests in Hainan, China.

Biogenic volatile organic compounds (BVOCs) emitted by tropical plants represent a significant proportion of global emissions, but the in-situ BVOC measurements in tropical rainforests are extremely sparse. Herein, a vehicle-mounted mobile monitoring system was developed for in-situ online investigations of BVOC emissions from thirty representative tree species in the tropical rainforests of Hainan Island, southern China. The results showed that monoterpenes were the primary BVOCs emitted from most broadleaf trees. Isoprene, sabinene, γ-terpinene and ß-ocimene were the most abundant BVOCs. Localized canopy-scale emission factors (EFs) exhibited notable discrepancies with the defaults in the Model of Emissions of Gases and Aerosols from Nature (MEGAN), specifically with isoprene EFs being slightly lower than the model, while the EFs for monoterpenes and sesquiterpenes were 1 to 27 times higher than those in MEGAN. The BVOC emission inventory for the predominant mature forest species in Hainan Island in 2023 was further estimated to be 244.43 Gg C·yr-1, with isoprene and monoterpenes accounting for 74 % and 16 %, respectively. Additionally, unimodal monthly variation patterns were revealed, with BVOC emissions peaked in July (30.08 Gg C·yr-1) and bottomed in January (8.84 Gg C·yr-1). This study demonstrates the potential and versatility of the applied mobile platform for in-situ online measurements of plant volatiles. Our findings provide important data support for reducing uncertainties in BVOC emission estimations in tropical rainforests and for evaluating their health benefits in the context of forest therapy.

Measurement and health risks assessment of BTEX compounds exposure in beauty Lahijan City salons.

The presence of BTEX (Benzene, Toluene, Ethylbenzene, and Xylene) compounds in beauty salons has raised concerns about potential health risks. This study aimed to measure the levels of BTEX compounds in the air of beauty salons in Lahijan, Iran and assess the associated health risks. Air samples were collected from 15 beauty salons, and the concentrations of BTEX compounds were measured according to 1501 NIOSH standard method. The results showed that the mean concentrations of benzene (20.62 µg/m3), toluene (18.3 µg/m3), ethylbenzene (38.36 µg/m3), and O and P-xylene (27.35, 23.6 µg/m3) were above the recommended levels. The indoor to outdoor ratios for benzene, toluene, ethylbenzene, O and P-xylene were 3.04, 2.36, 3.75, 4.89, and 6.54, respectively. Also, the toluene/benzene (T/B) ratio in indoor and outdoor was 20.9 and 2.68 respectively. Almost half of the technicians (49.12%) reported adverse health effects, including joint pain, itchy eyes and nose, and respiratory allergies. The IARC guideline suggests that there is a potential risk of cancer development for individuals in all salons with LCR values exceeding 10-6, but the HQ index values indicate no non-carcinogenic risk. The findings suggest that beauty salon workers and customers are at risk of developing health problems from exposure to BTEX compounds. Effective risk management strategies, such as proper ventilation, use of personal protective equipment, and substitution of harmful chemicals with safer alternatives, to minimize exposure and protect the health of salon workers and customers recommended.

Alterations of meat quality, lipid composition and flavor in breast meat of laying hens with fatty liver hemorrhagic syndrome.

Fatty liver hemorrhagic syndrome (FLHS) has a high incidence rate in laying hens, and lots of FLHS-affected meat products enter the market every year. At the same time, the meat of laying hens is an important component of the human diet. However, the impact of FLHS on meat of laying hens is unknown, which could have a negative impact on consumers. To explore the effects of FLHS on chicken breast meat, a total of 36 twenty-five-wk-old Jingfen laying hens were used in the experiment. The hens were randomly divided into Control group and Model group, with 6 replicates per group and 3 hens per replicate. All chickens were raised in double-story step cages with individual pens. After a 3-wk acclimation period, the formal experiment began at 28 wk of age and lasted for 8 wk. Blood, liver, and breast meat samples were collected for the study of FLHS effects on breast meat. The impact of FLHS on meat quality was assessed by measuring indicators such as water-holding capacity and tenderness of the breast meat. Absolute quantitative lipidomics was employed to reveal the impact of FLHS on the lipid composition of chicken breast meat, and then validated by using RT-qPCR. Moreover, the volatilomics was utilized to detect changes in volatile organic compounds (VOCs) in chicken breast meat and to elucidate the resulting flavor changes. This research results showed that the meat quality of chicken breast meat decreased under FLHS, mainly manifested as reduced water holding capacity and decreased tenderness. The lipid content in the breast meat of FLHS-affected hens was significantly increased (P < 0.05). Among the affected lipids, 38 triglycerides exhibited notable elevation, possibly linked to heightened gene expression, such as lysophosphatidylcholine acyltransferase 3. The breast meat of laying hens with FLHS demonstrated an increased presence of VOCs, with 20 differential VOCs identified. Notably, 14 VOCs, particularly in 2-Undecenal, trans-Geranylacetone and ethyl nonanoate, exhibited substantial increases. These 3 VOCs had been identified as playing an important role in the formation of flavor in the breast meat of FLHS-affected laying hens. Correlation analysis suggested that the increase in these 3 VOCs might be related to the increase in lipid molecules such as phosphatidylethanolamine (38;3e) and acyl carnitine (10:3). In summary, FLHS reduced the breast meat quality of laying hens, altered its lipid profiles, and enhanced its flavor. These findings underscore the profound impact of FLHS on lipid and VOC profiles in chicken breast meat, offering valuable insights for chicken meat quality affected by FLHS.

Prealighting and Postalighting Volatile Organic Compounds Emitted by Rice Influence the Behavior of Scirpophaga incertulas.

Yellow stem borer (YSB), Scirpophaga incertulas, is a major rice pest causing significant yield losses worldwide. We investigated how volatile organic compounds (VOCs) released by the rice variety TN1, both before and after infestation, as well as by its companion weeds, Echinochloa colona and Echinochloa crus-galli, influence the behavior of YSB in host selection, recognition, and establishment. Olfactometry bioassays showed that uninfested TN1 plant VOCs attracted YSB more than those from YSB-infested rice plants and weeds. Changes in the VOC profile of TN1 during 24-48 h post-YSB infestation revealed that these postalighting compounds may deter YSB oviposition. Xylene, cymene, 1,2,3,4-tetrahydro naphthalene, dodecanol, and tetradecanol could be possible YSB attractants based on metabolomics, olfactometry, and GC-EAD studies. This work illuminates rice plant-YSB chemical interactions and VOCs dynamic function in attraction and defense processes. These findings provide a foundation for developing VOC-based pest management strategies to mitigate yield losses in rice farming.

Determining personal exposure to high production volume chemicals (HPVCs) and polycyclic aromatic hydrocarbons (PAHs) with silicone wristbands: A pilot study.

High production volume chemicals (HPVCs) and polycyclic aromatic hydrocarbons (PAHs) are semi-volatile organic compounds (semi-VOCs) of great environmental concern because of their presence worldwide and health problems resulting from long-term exposure to some of them. It is essential to have robust analytical methods to monitor the concentrations of these compounds not only in environmental samples but also individual exposure. In this pilot study we develop and validate a multiresidue analytical method based on ultrasound-assisted extraction and gas-chromatography mass spectrometry for the simultaneous determination of 56 semi-VOCs using silicone wristbands (SWBs) as personal passive samplers. The developed method provided recoveries between 43% and 114% on sampled SWBs and method detection and quantification limits in the range of 0.1-35 ng/g and 0.3-119 ng/g, respectively. A preliminary study was performed with a small group of adults living in the industrial city of Tarragona (north-eastern Spain) to evaluate the applicability of SWBs for monitoring individual exposure to the studied HPVCs and PAHs. Benzothiazoles, benzenesulfonamides, UV stabilisers and phenolic antioxidants were determined for the first time in SWBs. Phthalates (PAEs), stood out above the rest, accounting for 52% of the total concentrations. Diethylhexyl phthalate was the compound found at the highest concentrations with values between 1.1 and 82 µg/g. Carcinogenic and non-carcinogenic dermal risk assessment was performed for adults and considering two scenarios (low and high). PAHs were the compounds with the highest carcinogenic and non-carcinogenic dermal risk regardless of the exposure scenario. The second family of compounds that contributed the most to the total risk were PAEs but high punctual concentrations of these compounds caused significant differences between exposure scenarios.

Identifying effects of volatile organic compounds exposure on kidney stone prevalence in U.S. adults: a cross-sectional analysis of NHANES 2007-2020.

OBJECTIVE: Our aim was to comprehensively investigate the relationship between blood volatile organic compounds (VOCs) and kidney stone prevalence for U.S. adults. METHODS: In this cross-sectional study, 10,052 participants from the 2007-2020 National Health and Nutrition Examination Survey (NHANES) were included. Multivariate logistic regression model was employed to investigate the association between 9 blood VOCs and kidney stones. We explored the dose-response relationship between blood VOCs and kidney stones using restricted cubic spline (RCS) analysis. Additionally, weighted quantile sum (WQS) regression model was performed to assess the overall association of 9 blood VOCs with kidney stones. Finally, subgroup analyses were conducted to identify the findings in different populations at high prevalence. RESULTS: Logistic regression analysis and dose-response risk curves revealed that blood benzene (aOR = 1.308, 95% CI: 1.118-1.530, P = 0.001), blood ethylbenzene (aOR = 1.280, 95% CI: 1.054-1.554, P = 0.013), blood m-/p-xylene (aOR = 1.187, 95% CI: 1.008-1.398, P = 0.040), blood 2,5-dimethylfuran (aOR = 1.319, 95% CI: 1.135-1.533, P < 0.001) and blood furan (aOR = 1.698, 95% CI: 1.305-2.209, P < 0.001) were positively associated with the prevalence of kidney stones. WQS regression analysis revealed that exposure to mixed blood VOCs was positively correlated with kidney stone prevalence (OR = 1.34, 95% CI: 1.14-1.57), with furans carrying the greatest weight. Subgroup analyses suggested that kidney stones were more susceptible to the effects of blood VOCs in young and middle-aged, female, overweight and obese, non-hypertensive, and non-diabetic populations. CONCLUSIONS: In this study, the results indicated that high VOC exposure was positively and independently associated with kidney stones in U.S. adults. This finding highlighted the need for public health strategies to reduce VOC exposure and its role in kidney stone prevention and treatment.

A Critical Review of Deep Oxidation of Gaseous Volatile Organic Compounds via Aqueous Advanced Oxidation Processes.

Volatile organic compounds (VOCs) are considered to be the most recalcitrant gaseous pollutants due to their high toxicity, diversity, complexity, and stability. Gas-solid catalytic oxidation methods have been intensively studied for VOC treatment while being greatly hampered by energy consumption, catalyst deactivation, and byproduct formation. Recently, aqueous advanced oxidation processes (AOPs) have attracted increasing interest for the deep oxidation of VOCs at room temperature, owing to the generation of abundant reactive oxygen species (ROS). However, current reviews mainly focus on VOC degradation performance and have not clarified the specific reaction process, degradation products, and paths of VOCs in different AOPs. This study systematically reviews recent advances in the application of aqueous AOPs for gaseous VOC removal. First, the VOC gas-liquid mass transfer and chemical oxidation processes are presented. Second, the latest research progress of VOC removal by various ROS is reviewed to study their degradation performances, pathways, and mechanisms. Finally, the current challenges and future strategies are discussed from the perspectives of synergistic oxidation of VOC mixtures, accurate oxidation, and resource utilization of target VOCs via aqueous AOPs. This perspective provides the latest information and research inspiration for the future industrial application of aqueous AOPs for VOC waste gas treatment.

Early warning of Aspergillus contamination in maize by gas chromatography-ion mobility spectrometry.

Introduction: As one of the main grain crops in China, maize is highly susceptible to Aspergillus infection during processing, storage and transportation due to high moisture at harvest, which results in the loss of quality. The aim of this study is to explore the early warning marker molecules when Aspergillus infects maize kernels. Methods: Firstly, strains MA and MB were isolated from moldy maize and identified by morphological characterization and 18S rRNA gene sequence analysis to be Aspergillus flavus (A. flavus) and Aspergillus niger (A. niger). Next, fresh maize was moldy by contaminated with strains MA and MB. The volatile organic compounds (VOCs) during the contamination process of two fungal strains were analyzed by gas chromatography-ion mobility spectrometry (GC-IMS). A total of 31 VOCs were detected in maize contaminated with strain MA, a total of 32 VOCs were detected in maize contaminated with strain MB, including confirmed monomers and dimers. Finally, heat maps and principal component analysis (PCA) showed that VOCs produced in different growth stages of Aspergillus had great differences. Combined with the results of GC-IMS, total fungal colony counts and fungal spores, it was concluded that the Aspergillus-contaminated maize was in the early stage of mold at 18 h. Results: Therefore, the characteristic VOCs butan-2-one, ethyl acetate-D, Benzaldehyde, and pentan-2-one produced by maize at 18 h of storage can be used as early mildew biomarkers of Aspergillus infection in maize. Discussion: This study provided effective marker molecules for the development of an early warning and monitoring system for the degree of maize mildew in granaries.

Translating 2D-Chromatographic Fingerprinting to Quantitative Volatilomics: Unrevealing Compositional Changes in Maize Silage Volatilome for Robust Marker Discovery.

This study examines the complex volatilome of maize silage, both with and without commercial heterolactic strain inoculation, conserved for 100 days, using quantitative volatilomics. Chemical classes linked to microbial metabolism were analyzed across a concentration range from 10 µg g-1 to 1 ng g-1. A reference method using comprehensive two-dimensional gas chromatography (GC × GC) and time-of-flight mass spectrometry (TOF MS) with loop-type thermal modulation (TM) was translated to a differential-flow modulation (FM) platform with parallel MS and flame ionization detector (FID) detection. With translation, the original method's analyte elution order and resolution are preserved. The new method allowed for accurate quantification using multiple headspace solid-phase microextraction (MHS-SPME) and FID-predicted relative response factors (RRFs). Both methods showed comparable discriminatory power with FM GC × GC-MS/FID achieving satisfactory quantification accuracy without external calibration. Analysis of 98 volatiles provided insights into silage fermentation, supporting marker discovery and correlations with silage quality and stability.

Extensive investigation of seasonal and spatial fluctuations of BTEX in an industrial city with a health risk assessment.

There are many pollutants in the air that can be harmful to human health. Their impact varies based on factors such as the kind of pollutant, duration of exposure, and concentration levels. Volatile organic compounds are particularly significant carcinogens among the various pollutants present in the air. Consequently, people who are exposed to these harmful airborne pollutants suffer permanent consequences. This study examines the properties of BTEX compounds-benzene, toluene, ethylbenzene, and xylene-as well as their sources and risk assessments throughout a one-year period from March 21, 2019, to March 20, 2020, in Karaj, Iran's largest industrialized city. First, utilizing a geographical information system that covered the entire city, 17 locations within Karaj were chosen for this purpose. Then, samplings were carried out in the spring, summer, autumn, and winter months with the NIOSH 1501 method. During the research period, 68 samples of BTEX compounds were collected. The adsorption of these contaminants on the activated carbon adsorbents was performed using an environmental sampling pump with a flow rate of 0.2 L/min for 1 h. The samples were subsequently prepared using a carbon disulfide solution and injected into a GC-FID for analysis. In this research, the average annual concentration of BTEX compounds in the air of Karaj city was obtained at 33.01 µg/m3. Autumn and spring had the highest and lowest average concentrations of BTEX compounds, respectively. In addition, sites 5 and 8 had the highest average annual concentrations of these pollutants. The sourcing conducted in this study showed that transportation and fuel consumption, as well as industries, were the primary sources of pollution in the city. In addition, the excess lifetime cancer risk was higher than the guideline value in some sites and lower in others. Furthermore, the Hazard Quotients were lower than 1, but in general, the citizens of Karaj were at serious risk from exposure to this group of pollutants.