Self-Assembly of an Unlikely Occurring Quadrangular Tube by Modulating Intramolecular Forces.

One of the central focuses in self-assembly is precisely controlling the self-assembly pathway so that the target molecules can be produced exclusively. Trans-1,2-cyclohexanediamine contains two amino units that form a 60° angle when projected on a plane. This angle naturally favors the formation of triangular products in most cases when trans-1,2-cyclohexanediamine is used as a bisamino building block in the synthesis of macrocycles and tubes. Here, we synthesized a slightly bent tetraformyl precursor bearing a central dibenzothiophene moiety, whose 3,7-positions are functionalized with two m-phthalaldehyde units. We observed that combining this tetraformyl building block with trans-1,2-cyclohexanediamine yielded a quadrangular tube when the concentrations of the precursors were relatively high. Both experimental measurements and theoretical calculations indicate that the formation of this unlikely occurring quadrangular product was driven by the intramolecular C-H⋅⋅⋅π interactions between the dibenzothiophene building blocks within the tube framework. This driving force, however, was disturbed in the triangular tube, a smaller counterpart whose formation was considered previously much more thermodynamically favored. These results improved our fundamental understanding on how to create those products whose syntheses are considered difficult or impossible, by modulating the intramolecular driving forces.

Solvent-Induced Bright Emission in Lead-Free Organic-Inorganic Antimony Bromides with Reversible Transformation.

Lead-free low-dimensional organic-inorganic metal halides have gained increasing attention in a wide range of applications due to their low toxicity, outstanding optical performance, and structural tunability. In this work, a general method of incorporating organic molecule into sodium antimony bromides is introduced. The 1D Na3SbBr6(C2H6OS)6 and Na3SbBr6(C4H8OS)6 single crystals exhibit bright yellow and orange emission with PL peaks at 610 and 664 nm, and high photoluminescence quantum yields (PLQYs) of 85% and 60%, respectively. These two compounds can be reversibly converted into each other by the removal and addition of the organic components. Their exceptional luminescent performance enables them to be used as solid-state phosphors for the fabrication of yellow and orange down-conversion LEDs. A white LED with a high color rendering index (CRI) of 95 is also fabricated by using Na3SbBr6(C2H6OS)6 as the yellow phosphor. The universality of this method is demonstrated by synthesizing other members of this family with diverse A-groups, including methylammonium (MA) and formamidinium (FA). This work provides an effective strategy for the development of diverse lead-free and high-performance organic-inorganic hybrid materials and indicates these organic-inorganic hybrid compounds are promising luminescent materials for lighting or displays.

Surface-Ligand Tuned Reversible Transformations in Aqueous Environments Between CdSe Magic-Size Clusters and Their Precursor Compounds.

That magic-size clusters (MSCs) have their counterpart precursor compounds (PCs) has not been generally accepted by expertise circles. Here, experimental evidence to support this new concept is presented. With aqueous-phase CdSe MSCs as a model system, it is shown that when the MSCs are dispersed in water containing a certain amount of L-cysteine (Cys), the MSCs disappear slowly. Upon the addition of CdCl2 , the MSCs recover. It is proposed that after dispersing, the MSCs transform to their quasi-isomeric, non-absorbing PCs upon Cys addition. In the presence of CdCl2 , the PCs transform back to the MSCs due to Cys elimination. The surface ligand Cys of the MSCs plays a significant role in the reversible transformations. The present study provides compelling evidence that absorbing MSCs have their non-absorbing PCs. The study findings suggest that the transformation between two MSCs that display absorption spectral shifts in a stepwise pattern is assisted by their PCs.

Solvent-Assisted Fractionation of Oligomeric Cellulose and Reversible Transformation of Cellulose II and IV.

Oligomeric cellulose with an average degree of polymerization of 7.68 and a polydispersity of 1.04 has been fractionated using solution processes. Three fractions have been obtained through initial dissolution, subsequent crystallization, and solvent precipitation, respectively. The resulting oligocellulose fraction has an average degree of polymerization of 7.70 and a polydispersity of 1.01, respectively. Cellulose IV2 crystals form in the oligocellulose fraction, and reversibly transform to II and back to IV using simple solvents.

Ultrasonication-assisted synthesis of CsPbBr3 and Cs4PbBr6 perovskite nanocrystals and their reversible transformation.

We demonstrate an ultrasonication-assisted synthesis without polar solvent of CsPbBr3 and Cs4PbBr6 perovskite nanocrystals (PNCs) and their reversible transformation. The as-prepared CsPbBr3 PNCs and Cs4PbBr6 PNCs exhibit different optical properties that depend on their morphology, size, and structure. The photoluminescence (PL) emission and quantum yield (QY) of the CsPbBr3 PNCs can be tuned by changing the ultrasound power, radiation time, and the height of the vibrating spear. The optimized CsPbBr3 PNCs show a good stability and high PL QY of up to 85%. In addition, the phase transformation between CsPbBr3 PNCs and Cs4PbBr6 PNCs can be obtained through varying the amount of oleylamine (OAm) and water. The mechanism of this transformation between the CsPbBr3 PNCs and Cs4PbBr6 PNCs and their morphology change are studied, involving ions equilibrium, anisotropic growth kinetics, and CsBr-stripping process.

Spontaneous Formation of 1D Pattern in Monolayer VSe2 with Dispersive Adsorption of Pt Atoms for HER Catalysis.

Creation of functional patterns in two-dimensional (2D) materials provides opportunities to extend their potential for applications. Transition-metal dichalcogenides (TMDCs) are suitable 2D materials for pattern generation because of properties including alterable polymorphic phases, easy chalcogen-vacancy formation, metal-atom insertion, and alloying. Such patterning can be used for selective functionalization. Here we report the spontaneous formation of long-range, well-ordered 1D patterns in monolayer vanadium diselenide (VSe2) by a single annealing stage during growth. Atomic-resolution images in real space combined with density-functional-theory (DFT) calculations reveal the 1D features of patterned VSe2. Further experimental characterization of the intermediate states in the growth process confirm the spontaneous formation of the 1D pattern by annealing-induced Se-deficient linear defects. The 1D pattern can be reversibly transformed to homogenous VSe2 monolayer by reintroducing Se atoms. Moreover, additional experiments demonstrate that a dispersive deposition of Pt atoms along the 1D structures of patterned VSe2 is achieved, while DFT calculations find that their catalytic activity for hydrogen evolution reaction (HER) is as good as that of Pt surfaces. The formation of long-range, well-ordered 1D patterns not only demonstrates an effective way of dimension modulation in 2D materials but also enriches the potential of intrinsically patterned 2D materials for promising catalytic activities.

In situ tracking the reversible spinel-rocksalt structural transformation between Mn3O4 and MnO.

Electron beam irradiation is well known to induce damage in materials. The structural transformation involved in the damage is usually believed to be an irreversible solid state chemical reaction. Here we use in situ transmission electron microscopy (TEM) combined electron-energy loss spectroscopy (EELS) technique in an aberration-corrected TEM to track the structural transformation in spinel Mn3O4 induced by electron beam irradiation. It is clarified that spinel Mn3O4 is transformed to rocksalt structured MnO by irradiation and the reversed recovering transition from rocksalt MnO to spinel Mn3O4 can occur by aging in the gentle electron beam circumstance. The mechanisms including the role of O desorption/adsorption and the displacement of Mn and O involved in the reversible transformation processes are discussed. The work presents an implication that electron beam can modify the structure at atomic dimension yielding diverse assemblies of surfaces, interfaces and colorful properties.

Effect of nitrogen, carbon sources and agitation speed on acetoin production of Bacillus subtilis SF4-3

Background: Currently, microbial fermentation method has become the research hotspot for acetoin production. In our previous work, an acetoin-producing strain, Bacillus subtilis SF4-3, was isolated from Japanese traditional fermented food natto. However, its conversion of glucose to acetoin was relatively low. In order to achieve a high-efficient accumulation of acetoin in B. subtilis SF4-3, main medium components and fermentation conditions were evaluated in this work. Results: The by-products analysis showed that there existed reversible transformation between acetoin and 2,3-butanediol that was strictly responsible for acetoin production in B. subtilis SF4-3. The carbon sources, nitrogen sources and agitation speed were determined to play crucial role in the acetoin production. The optimal media (glucose-H2O 150 g/L, yeast extract 10 g/L, corn steep dry 5 g/L, urea 2 g/L, K2HPO4 0.5 g/L, MgSO4 0.5 g/L) were obtained. Furthermore, the low agitation speed of 300 r/min was found to be beneficial to the reversible transformation of 2,3-butanediol for acetoin production in B. subtilis SF4-3. Eventually, 48.9 g/L of acetoin and 5.5 g/L of 2,3-butanediol were obtained in a 5-L fermenter, and the specific production of acetoin was 39.12% (g/g), which accounted for 79.90% of the theoretical conversion. Conclusions: The results indicated acetoin production of B. subtilis SF4-3 was closely related to the medium components and dissolved oxygen concentrations. It also provided a method for acetoin production via the reversible transformation of acetoin and 2,3-butanediol.

The photophysical behavior of the photochromic naphthopyran derivative having photo-switching ability.

The photophysical behavior of the photochromic naphthopyran derivative 9 with photo-switching ability has been investigated in solution phase as well as in crystalline form. The proposed switching motifs might be a versatile framework in the development of photonic devices whose properties can be toggled between two states on exposure to electromagnetic radiations. The closed form of 9 undergoes reversible transformation upon irradiation with light by changing the molecular structure from ring closed conformation 9 to the ring opened form 10. The compound 9 exhibited first absorption signal at 238nm with shoulder peak at 261nm and second absorption signal at 353nm while on photo-irradiation, the colorless solution of 9 turn to colored and there was ratiometric downfall in the signal intensity for shoulder signal at 261nm as well as second absorption signal at 353nm and ultimately results in the disappearance of these both signal after 20min of irradiations. Meanwhile, the colorimetric change in the reaction solution and considerable shift in the absorption and emission signal intensity as well as position suggest the conformational changes in the molecules from less conjugate conformation 9 to the extended conjugated conformation 10.