Functionally-Graded Serrated Fangs Allow Spiders to Mechanically Cut Silk, Carbon and Kevlar Fibers.

Before humans and allegedly any animal group, spiders developed "functionally graded toothed blades" that cut one of the toughest biological materials: silk. Here, this work reveals the importance of micro-structured serrations in spiders' fangs that allow these animals to cut silk and artificial high-performance fibers, such as carbon or Kevlar. The importance of serrations revolves around the stress concentration at the interface between the fang and the fibers, resulting in a cutting efficiency superior to that of a razor blade. This efficiency is increased by the presence of pretension in the fibers and is high also for fibers with different diameters like silk, because of the serration grading that allows a smart positioning of the fiber in the optimal cutting condition. This work proposes that when the silk fiber is grasped by the fang, it slides along the serrated edge till it gets locked in the serration with a comparable size, where the load to cut is minimal. These results provide a new perspective on cutting mechanisms and set the roots for spider fang-inspired cutting tools.

Biological conduits based on spider silk for reconstruction of extended nerve defects.

Objectives: The availability of appropriate conduits remains an obstacle for successful reconstruction of long-distance nerve defects. In previous sheep trials, we were able to bridge 6 cm nerve gaps with nerve conduits based on spider silk fibers with full functional outcomes. Here, we describe the first application of spider silk for nerve repair in humans. Methods: Four patients with extended nerve defects (>20 cm) underwent nerve reconstruction by interposition of conduits that were composed of spider silk fibers contained in autologous veins. The longitudinal luminal fibers (approx. 2500 fibers per graft) consisted of drag line silk from Trichonephila spiders. All patients were evaluated between 2 and 10 years postreconstruction, clinically, and by neurography. Results: In all patients, primary wound healing and no adverse reactions to the implanted spider silk material were observed. Patients regained the following relevant functions: protective sensibility, full flexor function with near-normal grasp and powerful function after microvascular gracilis muscle transfer, and key grip function and gross finger flexion after additional tenodesis. One patient with sciatic nerve reconstruction developed protective sensibility of the lower leg, foot, and gait, enabling normal walking and jogging. No neuroma formation or neuropathic or chronic pain occurred in any of the patients. Conclusions: For patients with extended peripheral nerve defects in the extremities, use of conduits based on spider silk fibers offers the possibility of restoring sensory function and protection from neuroma. This kind of nerve bridges provides new perspectives for the reconstruction of complex and long-distance nerve defects.

Efficient Inhibition of Ice Recrystallization During Frozen Storage: Based on the Diffusional Suppression Effect of Silk Fibroin.

Effectively controlling ice recrystallization (IR) during the frozen storage of food remains highly challenging. Inspired by the structural characteristics of antifreeze proteins in nature, silk fibroin (SF) derived from silk fibers has been developed. Through dual validation using the "splat" assay and "sucrose sandwich" assay, the IR inhibition activity of SF at various concentrations was confirmed, revealing that its regular alternating hydrophilic/hydrophobic domains endow SF with the potential to inhibit the axial growth of single ice crystal and significantly reduce the average maximum crystal size by approximately 67%. Additionally, the quality stability of frozen muscle foods treated with SF was comprehensively evaluated. In stark contrast to traditional commercial antifreeze agents (4% sucrose and 4% sorbitol), prepared steaks with the addition of 2% SF maintained rich juiciness and excellent color acceptability over a three-month frozen storage period. Thus, SF holds promise as a potential protective agent for frozen muscle foods, enhancing their quality during storage.

Antibacterial Electrospun Membrane with Hierarchical Bead-on-String Structured Fibres for Wound Infections.

Chronic wounds often result in multiple infections with various kinds of bacteria and uncontrolled wound exudate, resulting in several healthcare issues. Advanced medicated nanofibres prepared by electrospinning have gained much attention for their topical application on infected chronic wounds. The objective of this work is to enhance the critical variables of ciprofloxacin-loaded polycaprolactone-silk sericin (PCL/SS-PVA-CIP) nanofibre production via the process of electrospinning. To examine the antibacterial effectiveness of PCL/SS-PVA-CIP nanocomposites, the material was tested against P. aeruginosa and S. aureus. The combination of PCL/SS-PVA-CIP exhibited potent inhibitory properties, with the most effective concentrations of ciprofloxacin (CIP) being 3 µg/g and 7.0 µg/g for each bacterium, respectively. The biocompatibility was evaluated by conducting cell reduction and proliferation studies using the human epidermal keratinocyte (HaCaT) cells and human gingival fibroblasts (HGFs) in vitro cell lines. The PCL/SS-PVA-CIP showed good cell compatibility with HaCaT and HGF cells, with effective proliferation even at antibiotic doses of up to 7.0 µg/g. The drug release effectiveness of the nanocomposites was assessed at various concentrations of CIP, resulting in a maximum cumulative release of 76.5% and 74.4% after 72 h for CIP concentrations of 3 µg/g and 7 µg/g, respectively. In summary, our study emphasizes the possibility of combining silk sericin (SS) and polycaprolactone (PCL) loading with CIP nanocomposite for wound management.

Spider silk tensile performance does not correlate with web use.

Spider silk is amongst the toughest materials produced by living systems, but its tensile performance varies considerably between species. Despite the extensive sampling of the material properties and composition of dragline silk, the understanding why some silks perform better than others is still limited. Here, I adopted a phylogenetic comparative approach to re-analyse structural and mechanical data from the Silkome database and the literature across 164 species to (a) provide an extended model of silk property evolution, (b) test for correlations between structural and mechanical properties, and (c) to test if silk tensile performance differs between web-building and non-web-building species. Unlike the common notion that orb-weavers have evolved the best performing silks, outstanding tensile properties were found both in and outside the araneoid clade. Phylogenetic linear models indicated that the mechanical and structural properties of spider draglines poorly correlate, but silk strength and toughness correlated better with birefringence (an indicator of the material anisotropy) than crystallinity. Furthermore, in contrast to previous ideas, silk tensile performance did not differ between ecological guilds. These findings indicate multiple unknown pathways towards the evolution of spider silk tensile super-performance, calling for a better integration of non-orb-weaving spiders in spider silk studies.

A PLGA/Silk Fibroin Nanofibre Membrane Loaded with Natural Flavonoid Compounds Extracted from Green Cocoons for Wound Healing.

The use of biodegradable materials combined with natural metabolites in wound dressings has received much attention. Flavonoids (FLs) from green cocoons, as metabolites, have antibacterial, antioxidant, anti-inflammatory, and other pharmacological effects. In this study, composite membranes of FL-loaded polylactic glycolic acid (PLGA)/silk fibroin (SF) were prepared by an electrospinning method. The prepared membranes, including SF, exhibited a good slow-release effect and cytocompatibility. An in vitro evaluation of the FL-loaded PLGA/SF membranes demonstrated good antioxidant, antibacterial, and anti-inflammatory properties. Animal experiments showed that the wound healing rate of PLGA/SF-2.5FL membranes within 15 days was 97.3%, and that of the control group was 72.5%. The PLGA/SF-2.5FL membranes shortened the inflammatory period of a full-layer wound model and promoted skin regeneration and wound healing by downregulating expression of the pro-inflammatory cytokines IL-1ß and TNF-α and promoting expression of the growth factors VEGF, TGF-ß, and EGF. In summary, the PLGA/SF-2.5FL composite nanofibre membrane with anti-inflammatory properties is an ideal wound dressing to promote acute wound healing.

Characterization and comparative analysis of sericin protein 150 in Bombyx mori.

Lepidopteran silk is a complex mixture of proteins, consisting mainly of fibroins and sericins. Sericins are a small family of highly divergent proteins that serve as adhesives and coatings for silk fibers. So far, five genes encoding sericin proteins have been identified in Bombyx mori. Having previously identified sericin protein 150 (SP150) as a major sericin-like protein in the cocoons of the pyralid moths Galleria mellonella and Ephestia kuehniella, we describe the identification of its homolog in B. mori. Our refined gene model shows that it consists of four exons and a long open reading frame with a conserved motif, CXCXCX, at the C-terminus, reminiscent of the structure observed in a class of mucin proteins. Notably, despite a similar expression pattern, both mRNA and protein levels of B. mori SP150 were significantly lower than those of its pyralid counterpart. We also discuss the synteny of homologous genes on corresponding chromosomes in different moth species and the possible phylogenetic relationships between SP150 and certain mucin-like proteins. Our results improve our understanding of silk structure and the evolutionary relationships between adhesion proteins in the silk of different lepidopteran species.

Silk Fibroin Film Decorated with Ultralow FeCo Content by Sputtering Deposition Results in a Flexible and Robust Biomaterial for Magnetic Actuation.

Magnetically responsive soft biomaterials are at the forefront of bioengineering and biorobotics. We have created a magnetic hybrid material by coupling silk fibroin─i.e., a natural biopolymer with an optimal combination of biocompatibility and mechanical robustness─with the FeCo alloy, the ferromagnetic material with the highest saturation magnetization. The material is in the form of a 6 µm-thick silk fibroin film, coated with a FeCo layer (nominal thickness: 10 nm) grown by magnetron sputtering deposition. The sputtering deposition technique is versatile and eco-friendly and proves effective for growing the magnetic layer on the biopolymer substrate, also allowing one to select the area to be decorated. The hybrid material is biocompatible, lightweight, flexible, robust, and water-resistant. Electrical, structural, mechanical, and magnetic characterization of the material, both as-prepared and after being soaked in water, have provided information on the adhesion between the silk fibroin substrate and the FeCo layer and on the state of internal mechanical stresses. The hybrid film exhibits a high magnetic bending response under a magnetic field gradient, thanks to an ultralow fraction of the FeCo component (less than 0.1 vol %, i.e., well below 1 wt %). This reduces the risk of adverse health effects and makes the material suitable for bioactuation applications.

Preparation and osteogenesis of a multiple crosslinking silk fibroin/carboxymethyl chitosan/sodium alginate composite scaffold loading with mesoporous silica/poly (lactic acid-glycolic acid) microspheres.

Large bone defect repair is a striking challenge in orthopedics. Currently, inorganic-organic composite scaffolds are considered as a promising approach to these bone regeneration. Silicon ions (Si4+) are bioactive and beneficial to bone regeneration and Si4+-containing inorganic mesoporous silica (MS) can effectively load drugs for bone repair. To better control the release of drug, we prepared biodegradable MS/PLGA (MP) microspheres. MP loaded organic silk fibroin/carboxymethyl chitosan/sodium alginate (MP/SF/CMCS/SA) composite scaffolds were further constructed by genipin and Ca2+ crosslinking. All MP/SF/CMCS/SA scaffolds had good swelling ability, degradation rate and high porosity. The incorporation of 1% MP significantly enhanced the compressive strength of composite scaffolds. Besides, MP loaded scaffold showed a sustained release of Si4+ and Ca2+. Moreover, the release rate of rhodamine (a model drug) of MP/SF/CMCS/SA scaffolds was obviously lower than that of MP. When culturing with rat bone marrow mesenchymal stem cells, scaffolds with 1% MP displayed good proliferation, adhesion and enhanced osteogenic differentiation ability. Based on the results above, the addition of 1% MP in SF/CMCS/SA scaffolds is a prospective way for drug release in bone regeneration and is promising for further in vivo bone repair applications.

Application of Silk Light Chain on a Graphene Composite Surface: A Molecular Dynamics and Electrochemical Experiment.

The surface functionalization of pristine graphene (PG) with beneficial biocomposites is important for biomedical and tissue engineering. This study introduces silk light chain as novel biocomposites to increase the biocompatibility of PG. We explored the supramolecular structures of the silk heavy and light chains. Through molecular dynamics, we compared and analyzed the structural effects and binding mechanisms of these domains in their interaction with PG. Our results highlighted a significant hydrophobic interaction between the silk light chain and PG, without structural collapse. The supramolecular structure of the silk light chain was identified by analyzing the amino acids bound to PG. Moreover, using the silk light chain, the hydrophobic surface of PG has changed to a hydrophilic surface, and the silk light-chain-PG electron transfer rate was evaluated for the graphene congeners: graphene oxide (GO) and reduced graphene oxide. Therefore, we are confident that the dispersibility and biocompatibility of PG can be increased using silk light chains, which will contribute to broadening the field of application of PG-based materials.

Silk-enriched hydrogels with ROS-scavenging dendrimers for advanced wound care.

This study explores the development of novel hydrogel composites for wound care, incorporating silk fibroin and reactive oxygen species (ROS)-scavenging dendrimers into a polyvinyl alcohol (PVA) matrix. Utilizing ionizing gamma radiation, we fabricated pristine PVA, silk-PVA (SPVA) binary, and dendrimer-silk-PVA (DSPVA) ternary hydrogel composites, with their composition confirmed via UV-visible absorption spectroscopy. Fourier-transform infrared (FTIR) and Raman spectroscopy analyses indicated complex interactions between the hydrogel components, enhancing their structural and biocompatible properties. Scanning electron microscopy (SEM) analysis revealed that dendrimer integration in DSPVA hydrogels significantly increased surface porosity, vital for tissue regeneration. The DSPVA hydrogels demonstrated effective ROS scavenging, reducing hydrogen peroxide (H2O2) concentrations by approximately 70 % within 24 h. In vivo wound healing studies in a diabetic mouse model showed enhanced wound closure in the DSPVA group, with a relative wound area reduction to 30 ± 4.3 % on day 10, compared to 56.5 ± 2.7 % in the control group. By the 16th day, the treated group exhibited near-complete wound contraction, markedly outperforming the control group. These findings underscore the potential of DSPVA hydrogels in diabetic wound management, combining silk fibroin's mechanical support, dendrimers' antioxidative properties, and PVA's structural benefits. Thus, DSPVA hydrogels are promising candidates for advanced wound care applications.

Physical-chemical double crosslinked silk fibroin hydrogel for high-performance bone screws.

Hydrogels are widely used due to their exceptional biocompatibility and adaptability, but their weak mechanical properties limit their application in biomedical engineering. Herein, we rapidly attained a comprehensive enhancement of silk fibroin hydrogels in mechanical properties by employing a physical-chemical double crosslinking strategy. The SF was ultrasonicated and simultaneously photo-crosslinked to form a di-tyrosine network interspersed with ß-sheet blocks, resulting in a SF hydrogel network structure with both rigid and flexible domains. The SF hydrogels exhibited a maximum breaking strength of 59.7 kPa and a Young's modulus of 82.2 MPa, demonstrating significant rigidity and flexibility. Subsequently, the silk screws prepared by this double crosslinking strategy showed extraordinary compressive strength and Young's modulus of 41.8 MPa and 10.9 MPa, respectively. The silk screws cocultured with osteoblasts showed optimal biocompatibility, and the rate of biodegradation could be matched to the rate of osteogenesis. The screw also exhibited high adaptability in the requirements of bone screws. In this study, the SF hydrogels prepared by physical-chemical double crosslinking have extraordinary mechanical properties and biocompatibility, which provides a new avenue for the preparation of high-performance hydrogels and has great potential in bone tissue engineering.

Multi-parametric Photoacoustic Imaging Combined with Acoustic Radiation Force Impulse Imaging for Applications in Tissue Engineering.

Tissue engineering is a dynamic field focusing on the creation of advanced scaffolds for tissue and organ regeneration. These scaffolds are customized to their specific applications and are often designed to be complex, large structures to mimic tissues and organs. This study addresses the critical challenge of effectively characterizing these thick, optically opaque scaffolds that traditional imaging methods fail to fully image due to their optical limitations. We introduce a novel multi-modal imaging approach combining ultrasound, photoacoustic, and acoustic radiation force impulse imaging. This combination leverages its acoustic-based detection to overcome the limitations posed by optical imaging techniques. Ultrasound imaging is employed to monitor the scaffold structure, photoacoustic imaging is employed to monitor cell proliferation, and acoustic radiation force impulse imaging is employed to evaluate the homogeneity of scaffold stiffness. We applied this integrated imaging system to analyze melanoma cell growth within silk fibroin protein scaffolds with varying pore sizes and therefore stiffness over different cell incubation periods. Among various materials, silk fibroin was chosen for its unique combination of features including biocompatibility, tunable mechanical properties, and structural porosity which supports extensive cell proliferation. The results provide a detailed mesoscale view of the scaffolds' internal structure, including cell penetration depth and biomechanical properties. Our findings demonstrate that the developed multimodal imaging technique offers comprehensive insights into the physical and biological dynamics of tissue-engineered scaffolds. As the field of tissue engineering continues to advance, the importance of non-ionizing and non-invasive imaging systems becomes increasingly evident, and by facilitating a deeper understanding and better characterization of scaffold architectures, such imaging systems are pivotal in driving the success of future tissue-engineering solutions.

Flexible Neural Interface From Non-Transient Silk Fibroin With Outstanding Conformality, Biocompatibility, and Bioelectric Conductivity.

Silk fibroin (SF) with good biocompatibility can enable an efficient and safe implementation of neural interfaces. However, it has been difficult to achieve a robust integration of patterned conducting materials (multichannel electrodes) on flexible SF film substrates due to the absence of some enduring interactions. In this study, a thermo-assisted pattern-transfer technique is demonstrated that can facilely transfer a layer of pre-set poly(3,4-ethylenedioxythiophene) (PEDOT) onto the flexible SF substrate through an interpenetrating network of 2 polymer chains, achieving a desired substrate/conductor intertwined interface with good flexibility (≈33 MPa), conductivity (386 S cm-1) and stability in liquid state over 4 months simultaneously. Importantly, this technique can be combined with ink-jet printing to prepare a multichannel SF-based neural interface for the electrocorticogram (ECoG) recording and inflammation remission in rat models. The SF-based neural interface with satisfied tissue conformability, biocompatibility, and bioelectric conductivity is a promising ECoG acquisition tool, where the demonstrated approach can also be useful to develop other SF-based flexible bioelectronics.

Investigation of the Structural Changes in Silk Due to Tin Weighting.

In the 19th century, the weighting of silk with metal salts, such as tin, was a common practice to enhance certain properties of silk fabrics and compensate for the weight loss incurred during the degumming process. This technique induces both physical and chemical modifications to the fibres, contributing to their long-term degradation, which requires thorough investigation. This study aims to examine the structural changes in silk fibres caused by the accumulation of metal salts from the tin-weighting process, using mock-up samples prepared through successive loading with weighting agents using a traditional tin-phosphate treatment method. Unweighted and tin-weighted silk samples were compared using scanning electron (SEM) micrographs, which presented the dispersed nanoparticles on the fibres, while through energy-dispersive X-ray spectroscopy (EDS) elemental mapping, the presence and uniform distribution of the weighting agents were confirmed. Fourier-transform infrared spectroscopy (FTIR) analysis revealed structural changes in tin-weighted silk samples compared to untreated ones, including shifts in amide bands, altered water/hydroxyl and skeletal stretching regions, and increased skeletal band intensities suggesting modifications in hydrogen bonding, ß-sheet content, and structural disorder without significantly impacting the overall crystallinity index. X-ray diffraction (XRD) analysis of both pristine and tin-weighted silk samples revealed significant alterations, predominantly in the amorphous regions of the silk upon weighting. These structural changes were further examined using small-angle X-ray scattering (SAXS) and small- and wide-angle X-ray scattering (SWAXS), which provided detailed insights into modifications occurring at the nanometre scale. The analyses suggested disruptions in ß-sheet crystals and intermolecular packing, especially in the amorphous regions, with increasing amounts of tin-weighting. Contact angle analysis (CA) revealed that the tin-phosphate-weighting process significantly impacted silk surface properties, transforming it from moderately hydrophobic to highly hydrophilic. These changes indicate that the incorporation of tin-phosphate nanoparticles on and within silk fibres could restrict the flexibility of polymer chains, impacting the physical properties and potentially the degradation behaviour of silk textiles. By studying these structural changes, we aim to deepen our understanding of how tin-weighting impacts silk fibre structure, contributing valuable insights into the longevity, conservation, and preservation strategies of silk textiles in the context of cultural heritage.

Enhancing Wound Healing: A Comprehensive Review of Sericin and Chelidonium majus L. as Potential Dressings.

Wound healing, a complex physiological process orchestrating intricate cellular and molecular events, seeks to restore tissue integrity. The burgeoning interest in leveraging the therapeutic potential of natural substances for advanced wound dressings is a recent phenomenon. Notably, Sericin, a silk-derived protein, and Chelidonium majus L. (C. majus), a botanical agent, have emerged as compelling candidates, providing a unique combination of natural elements that may revolutionize conventional wound care approaches. Sericin, renowned for its diverse properties, displays unique properties that accelerate the wound healing process. Simultaneously, C. majus, with its diverse pharmacological compounds, shows promise in reducing inflammation and promoting tissue regeneration. As the demand for innovative wound care solutions increases, understanding the therapeutic potential of natural products becomes imperative. This review synthesizes current knowledge on Sericin and C. majus, envisioning their future roles in advancing wound management strategies. The exploration of these natural substances as constituents of wound dressings provides a promising avenue for developing sustainable, effective, and biocompatible materials that could significantly impact the field of wound healing.

Set Up and Utilization of a Three-Dimensional In Vitro Bioreactor System for Human Intestinal Studies and Microbial Co-Cultures.

The study of human intestinal physiology and host-microbe interactions is crucial for understanding gastrointestinal health and disease. Traditional two-dimensional cell culture models lack the complexity of the native intestinal environment, limiting their utility in studying intestinal biology. Here, we present a detailed protocol for the set up and utilization of a three-dimensional (3D) in vitro bioreactor system for human intestinal studies and bacterial co-culture. This article outlines the design and assembly of the bioreactor system, scaffold fabrication, bacterial culture techniques, analysis methods, and troubleshooting tips. By providing step-by-step instructions, the goal is to enable other laboratories to utilize physiologically relevant tissue models of the human intestine, incorporating key features, such as nutrient flow, multiple human cell types, 3D architecture, and microbial communities. The incorporation of commensal bacteria into the bioreactor system allows for the investigation of complex host-microbe interactions, providing insight into gastrointestinal health and pathology. This article serves as a comprehensive resource for scientists seeking to advance their understanding of intestinal biology toward the development of novel therapeutic strategies for gastrointestinal disorders. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Scaffold design Basic Protocol 2: Intestinal cell culture: Caco2 cells Basic Protocol 3: Intestinal cell culture: organoids Basic Protocol 4: Bioreactor design and set up Basic Protocol 5: Bacteria in 3D bioreactor set up Basic Protocol 6: Bacteria and drug dosing.

A review on the use of composites of a natural protein, silk fibroin with Mxene/carbonaceous materials in biomedical science.

Silk fibroin (SF), a natural biodegradable and biocompatible protein, has garnered significant attention in biomedical applications due to its impressive properties, including excellent biocompatibility, biodegradability, and mechanical resilience. Nevertheless, its broader usage faces obstacles by its insufficient mechanical strength and electrical conductivity. In order to address these constraints, recent studies have concentrated on combining SF with cutting-edge nanomaterials like MXene and carbon-based materials. This review comprehensively examines the applications and potential of silk fibroin-MXene/carbon-based nanocomposites in biomedical fields. The unique properties of SF, MXene, and carbon-based materials are explored, emphasizing how their combination enhances mechanical strength, conductivity, and biocompatibility. These composites show substantial enhancements in performance for several biomedical applications by utilising the excellent conductivity and mechanical capabilities of MXene and carbonaceous elements. The innovative potential of these nanocomposites is highlighted by critically discussing key applications such as tissue engineering, drug delivery, and biosensing. In addition, the work discusses the latest research progress, difficulties, and future prospects in the sector, providing valuable insights into possible breakthroughs and uses. This review seeks to comprehensively analyse the existing information on silk fibroin-MXene/carbon based nanocomposites in healthcare.

Study on Printability Evaluation of Alginate/Silk Fibroin/Collagen Double-Cross-Linked Inks and the Properties of 3D Printed Constructs.

In recent years, biological 3D printing has garnered increasing attention for tissue and organ repair. The challenge with 3D-printing inks is to combine mechanical properties as well as biocompatibility. Proteins serve as vital structural components in living systems, and utilizing protein-based inks can ensure that the materials maintain the necessary biological activity. In this study, we incorporated two natural biomaterials, silk fibroin (SF) and collagen (COL), into a low-concentration sodium alginate (SA) solution to create novel composite inks. SF and COL were modified with glycidyl methacrylate (GMA) to impart photo-cross-linking properties. The UV light test and 1H NMR results demonstrated successful curing of silk fibroin (SF) and collagen (COL) after modification and grafting. Subsequently, the printability of modified silk fibroin (RSFMA)/SA with varying concentration gradients was assessed using a set of three consecutive printing models, and the material's properties were tested. The research results prove that the addition of RSFMA and ColMA enhances the printability of low-concentration SA solutions, with the Pr values increasing from 0.85 ± 0.02 to 0.90 ± 0.03 and 0.92 ± 0.02, respectively, and the mechanical strength increasing from 0.19 ± 0.01 to 0.28 ± 0.01 and 0.38 ± 0.01 MPa; cytocompatibility has also been improved. Furthermore, rheological tests indicated that all of the inks exhibited shear thinning properties. CCK-8 experiments demonstrated that the addition of ColMA increased the cytocompatibility of the ink system. Overall, the utilization of SF and COL-modified SA materials as inks represents a promising advancement in 3D-printed ink technology.

[Physical, chemical, and biological property of silk reinforced polycaprolactone composites for bone tissue engineering].

Objective: To develop a biodegradable implantable bone material with compatible mechanics with the bone tissue, providing a new biomaterial for clinical bone repair and regeneration. Methods: Silk reinforced polycaprolactone composites (SPC) containing 20%, 40%, and 60% silk were prepared by layer-by-layer assembly and hot-pressing technology. Macroscopic morphology was observed and microstructure were observed by scanning electron microscopy, compressive mechanical properties were detected by compression test, surface wettability was detected by surface contact angle test, degradation of materials was observed after soaking in PBS for 180 days, and proliferation of MC3T3-E1 cells was detected by cell counting kit 8 assay. Six Sprague Dawley rats were subcutaneously implanted with polycaprolactone (PCL) and 20%-SPC, respectively. Masson staining was used to analyze the in vivo degradation behavior and vascularization effect within 180 days. Results: The pore defects of the three SPC sections were relatively few. In the range of 20% to 60%, as the silk content increased and the PCL content decreased, the interlayer spacing of silk fabric decreased, and the fibers almost covered the entire cross-section. The compressive modulus and compressive strength of SPC showed an increasing trend, and the compressive modulus of 60%-SPC was slightly lower than that of 40%-SPC. There were significant differences in compressive modulus and compressive strength between the materials ( P<0.05). In vitro simulated fluid degradation experiments showed that the mass loss of the three types of SPC after 180 days of degradation was within 5%, with the highest mass loss observed in 60%-SPC. The differences in mass loss between the materials were significant ( P<0.05). As the silk content increased, the static water contact angle of each material gradually decreased, and all could promote the proliferation of MC3T3-E1 cells. The subcutaneous degradation experiment in rats showed that 20%-SPC began to degrade at 30 days after implantation, and material degradation and vascularization were significant at 180 days, which was in sharp contrast to PCL. Conclusion: SPC has the mechanical and hydrophilic properties that are compatible with bone tissue. It maintains its mechanical strength for a long time in a simulated body fluid environment in vitro, and achieves dynamic synchronization of material degradation, tissue regeneration, and vascularization through the body's immune regulation mechanism in vivo. It is expected to provide a new type of implant material for clinical bone repair.