Rhodamine 6G in Oxidized Sodium Alginate Polymeric Hydrogel for Photodynamically Inactivating Cancer Cells.

INTRODUCTION: As cancer therapy progresses, challenges remain due to the inherent drawbacks of conventional treatments such as chemotherapy, gene therapy, radiation therapy, and surgical removal. Moreover, due to their associated side effects, conventional treatments affect both cancerous and normal cells, making photodynamic therapy (PDT) an attractive alternative. METHODS: As a result of its minimal toxicity, exceptional specificity, and non-invasive characteristics, PDT represents an innovative and highly promising cancer treatment strategy using photosensitizers (PSs) and precise wavelength excitation light to introduce reactive oxygen species (ROS) in the vicinity of cancer cells. RESULTS: Poor aqueous solubility and decreased sensitivity of Rhodamine 6G (R6G) prevent its use as a photosensitizer in PDT, necessitating the development of oxidized sodium alginate (OSA) hydrogelated nanocarriers to enhance its bioavailability, targeted distribution, and ROS-quantum yield. The ROS quantum yield increased from 0.30 in an aqueous environment to 0.51 when using alginate-based formulations, and it was further enhanced to 0.81 in the case of OSA. CONCLUSION: Furthermore, the nanoformulations produced fluorescent signals suitable for use as cellular imaging agents, demonstrating contrast-enhancing capabilities in medical imaging and showing minimal toxicity.

3D-printed neck phantoms with detailed anatomy for ultrasound-guided procedure and device testing.

Objectives: With rapid advances in ultrasound-guided procedures, there is an unmet need for echogenic phantoms with sufficient anatomical details for artificial intelligence and ultrasound-guided device testing. We developed a method for creating neck phantoms for novel otolaryngology-related device testing. To achieve accurate representation of the anatomy, we utilized CT scans and 3D printing technology to create customized agar molds, thus providing high-fidelity yet cost-effective tools. Methods: Based on previous studies, the key components in our neck phantom include the cervical vertebrae, trachea, common carotid arteries, internal jugular veins, thyroid gland, and surrounding soft tissue. Open-source image analysis software were employed to process CT data to generate high fidelity 3D models of the target structures. Resin molds were 3D printed and filled with various agar mixtures to mimic anatomical echogenicity. Results: Following the method proposed, we successfully assembled the neck phantom which provided a detailed representation of the target structures. To evaluate the results, ultrasound data was collected on the phantom and living tissue and analyzed with ImageJ. We were able to demonstrate echogenicity comparable to that of living tissue. Conclusion: The proposed method for building neck phantoms with detailed anatomical features offers a valuable, detailed, low-cost tool for medical training and device testing in otolaryngology, particularly for novel devices that involve artificial intelligence (AI) guidance and robotic-based needle insertion. Additional anatomical refinements and validation studies could further enhance the consistency and accuracy, thus paving the way for future advancements in ultrasound training and research, and ultimately benefiting patient care and safety.

(+)4-cholesten-3-one/sodium alginate/gelatin hydrogel for full-thickness wound repair and skin regeneration.

(+)4-cholesten-3-one has been proved to have potential wound healing effect in the process of wound regeneration. This study aimed to evaluate the effect of (+)4-cholesten-3-one/sodium alginate/gelatin on skin injury and reveal its potential molecular mechanism. First, we prepared sodium alginate/gelatin hydrogel (SA/Gel hydrogel) with different ratios and tested their characteristics. Based on these results, different concentrations of (+)4-cholesten-3-one were added into SA/Gel hydrogel. A full-thickness skin injury model was successfully established to evaluate wound healing activityin vivo. HE staining and Masson staining were used to evaluate the thickness of granulation tissue and collagen deposition level. Immunohistochemical staining and immunofluorescence staining were applied to detect the level of revascularization and proliferation in each group of wounds. Western blot, quantitative-PCR and immunofluorescence staining were used to detect the expression of proteins related to Wnt/ß-catenin signaling pathway in each group of wounds.In vitroresults showed that the hydrogel not only created a 3D structure for cell adhesion and growth, but also exhibited good swelling ability, excellent degradability and favorable bio-compatibility. Most importantly,in vivoexperiments further indicated that (+)4-cholesten-3-one/SA/Gel hydrogel effectively enhanced wound healing. The effectiveness is due to its superior abilities in accelerating healing process, granulation tissue regeneration, collagen deposition, promoting angiogenesis, tissue proliferation, as well as fibroblast activation and differentiation. The underlying mechanism was related to the Wnt/ß-catenin signaling pathway. This study highlighted that (+)4-cholesten-3-one/SA/Gel hydrogel holds promise as a wound healing dressing in future clinical applications.

Alginate composite films incorporated with Zn-based inorganic antimicrobials for food packaging: Effects of morphology.

Biopolymers-based food packaging materials have drawn attention as potential candidates for substitution of petroleum-based materials. In this study, composite alginate films were developed by incorporating Zn-based antimicrobials to overcome the intrinsic disadvantages of alginates that hinder their wide applications. Antimicrobials with different morphologies (nanoplatelets, nanorods, and nanospheres) were employed to investigate the effects of antimicrobials' morphology on antibacterial, thermal, mechanical, and barrier performance of composite alginate films. Meanwhile, morphological and structural characterizations were carried out to explore the interactions between antimicrobials and alginate matrix. Results indicated that films with nanospheres exhibited superior antibacterial property, while those with one-dimensional nanorods possessed better mechanical and barrier performance. Besides, preliminary test on fresh-cut potatoes and chicken breasts indicated that the composite films showed potential in extending shelf life of foods. By incorporating antimicrobials with three different morphologies, this study provides particular insights into improving properties of composite packaging materials.

Application of purple basil leaf anthocyanins-loaded alginate-carrageenan emulgel beads in gelatin-based jelly candies.

Jelly candies could be considered promising food matrices for the delivery of bioactive compounds such as anthocyanins (ACNs). In this study, gelatin-based jelly candies were fortified with free ACNs-rich purple basil leaf extract (PBLE) and PBLE-loaded emulgel beads. The interaction between free ACNs and gelatin in the jelly matrix resulted in a lower release of ACNs in the mouth (8.27 %) and gastric stage (74.44 %) compared to those of free extract (24.92 and 86.13 %), as well as some protection in the intestinal stage. The release of ACNs from the jellies enriched with PBLE-loaded emulgel beads only began in the intestinal stage and reached 66.34-70.75 % of the initial load. Compared to those of PBLE-loaded emulgel beads, the introduction of beads within the jelly matrix increased the in vitro release of ACNs. The jelly samples enriched with PBLE-loaded emulgel beads yielded higher hardness, adhesiveness, flexibility, and chewiness compared to samples with free PBLE. While the color and appearance of jellies fortified with encapsulated PBLE were impaired, they got the highest sensory acceptance scores due to the masking of the bitter taste of the free extract. ACNs-loaded emulgel beads could be a viable method for fortifying jelly candies.

Borate bioactive glass enhances 3D bioprinting precision and biocompatibility on a sodium alginate platform via Ca2+ controlled self-solidification.

Sodium alginate (SA) has gained widespread acclaim as a carrier medium for three-dimensional (3D) bioprinting of cells and a diverse array of bioactive substances, attributed to its remarkable biocompatibility and affordability. The conventional approach for fabricating alginate-based tissue engineering constructs entails a post-treatment phase employing a calcium ion solution. However, this method proves ineffectual in addressing the predicament of low precision during the 3D printing procedure and is unable to prevent issues such as non-uniform alginate gelation and substantial distortions. In this study, we introduced borate bioactive glass (BBG) into the SA matrix, capitalizing on the calcium ions released from the degradation of BBG to incite the cross-linking reaction within SA, resulting in the formation of BBG-SA hydrogels. Building upon this fundamental concept, it unveiled that BBG-SA hydrogels greatly enhance the precision of SA in extrusion-based 3D printing and significantly reduce volumetric contraction shrinkage post-printing, while also displaying certain adhesive properties and electrical conductivity. Furthermore, in vitro cellular experiments have unequivocally established the excellent biocompatibility of BBG-SA hydrogel and its capacity to actively stimulate osteogenic differentiation. Consequently, BBG-SA hydrogel emerges as a promising platform for 3D bioprinting, laying the foundation for the development of flexible, biocompatible electronic devices.

Efficient removal of direct dyes by SA-Er biopolymer gel spheres: Equilibrium isotherms, kinetics and regeneration performance study.

Biomass-based adsorbent materials are characterized by their low cost, environmental friendliness, and ease of design and operation. In this study, biomass-based hydrogel microspheres erbium alginate (SA/Er) with high stability and adsorption properties were prepared by a one-step synthesis method. The prepared materials were characterized and analyzed by SEM-EDS, XRD, TGA, FT-IR, UV-Vis, BET-BJH and XPS, and the adsorption performance of SA/Er was investigated for high concentrations of azo dyes in water. The results showed that the adsorption performance of SA/Er on the azo dyes of direct violet N (DV 1) and direct dark green NB (DG 6) with concentrations of 850 mg/L and 1100 mg/L under the optimal conditions was very high, and the adsorption amount could be up to 692 mg/g and 864 mg/g, respectively. The adsorption process was in accordance with the quasi-secondary kinetic model, which was accomplished by physical and chemical adsorption; the Langmuir isothermal model was able to better respond to the adsorption equilibrium, and the adsorption was dominated by the adsorption of surface monolayers; after seven desorption cycles, the removal of both azo dyes by the adsorbent material could reach >79.7 %. Combined with the results of FT-IR, UV-vis and XPS analysis before and after the adsorption, it was revealed that the adsorption of SA/Er with the dye molecules mainly consisted of hydrogen bonding, electrostatic adsorption and surface complexation, which resulted in the significant adsorption effect on the two azo dyes, and the above results can provide a reference for the treatment of dye wastewater.

Gingerol containing polymeric nanofibers: a healing touch for accelerated wound recovery.

OBJECTIVE: In the current research, 6-gingerol (GA)-loaded nanofiber drug delivery system were developed, and their potential usage in wound healing was evaluated. SIGNIFICANCE: This study investigates the effectiveness of nanofibrous membranes composed of sodium alginate (SA), poly(vinyl alcohol) (PVA), and 6-gingerol (GA) as delivery systems for anti-inflammatory agents in the context of wound dressings. METHODS: GA-loaded SA/PVA nanofiber was prepared using electrospinning. In vitro characterization of this nanofiber included the examination of comprehensive in vitro characterization, anti-inflammatory and antioxidant activities, cytotoxicity, a scratch tes and in vivo skin test. RESULTS: GA was extracted from Zingiber officinale, and its successful isolation was confirmed through analyses such as H-NMR, C-NMR. Then GA was electrospuned into the SA/PVA nanofibers, and scanning electron microscopy (SEM) imaging revealed that the fiber diameters of the formulations ranged between 148 nm and 176 nm. Anti-inflammatory and antioxidant studies demonstrated that the effectiveness of GA increased with higher doses; however, this increase was accompanied by decreased cell viability. In vitro release studies revealed that GA exhibited a burst release within the first 8 h, followed by a controlled release, reaching completion within 24 h. Within the scope of in vitro release kinetics, release data are mathematically compatible with the Weibull model with high correlation. The scratch test results indicated that TB2 (%1 GA) promoted epithelialization. Furthermore, it was determined that TB2 (%1 GA) did not cause any irritation. CONCLUSIONS: As a result, TB2 shows promise as a formulation for wound dressings, offering potential benefits in the field of wound care.

Interfacial engineering of Pickering emulsions stabilized by pea protein-alginate microgels for encapsulation of hydrophobic bioactives.

This study aims to investigate the effects of interfacial layer composition and structure on the formation, physicochemical properties and stability of Pickering emulsions. Interfacial layers were formed using pea protein isolate (PPI), PPI microgel particles (PPIMP), a mixture of PPIMP and sodium alginate (PPIMP-SA), or PPIMP-SA conjugate. The encapsulation and protective effects on different hydrophobic bioactives were then evaluated within these Pickering emulsions. The results demonstrated that the PPIMP-SA conjugate formed thick and robust interfacial layers around the oil droplet surfaces, which increased the resistance of the emulsion to coalescence, creaming, and environmental stresses, including heating, light exposure, and freezing-thawing cycle. Additionally, the emulsion stabilized by the PPIMP-SA conjugate significantly improved the photothermal stability of hydrophobic bioactives, retaining a higher percentage of their original content compared to those in non-encapsulated forms. Overall, the novel protein microgels and the conjugate developed in this study have great potential for improving the physicochemical stability of emulsified foods.

Adsorptive removal of oxytetracycline hydrochloride using bagasse-based biochar powder and beads.

Oxytetracycline Hydrochloride (OTC), a common antibiotic used to treat specific illnesses in humans and animals, is characterized by poor absorption into cells, low volatility, and high hydrophilicity. It is a potent contaminant that poses a serious threat to the ecosystem, particularly the aquatic sources. Adsorption onto natural adsorbents is one of the most successful, economical, and ecologically friendly ways to remove antibiotics from waste water. The present work focuses on the adsorption of OTC utilizing alginate biochar beads (AlBCB) and biochar powder (BC) derived from bagasse. The influence of several factors were studies and optimized through batch studies employing BC and AlBCB. After 50 min BC displayed a removal of 97%, at an initial concentration of 10 ppm. The experimental data was discovered to follow PFO kinetics and fit with the Freundlich isotherm adsorption model. AlBCB, after a contact time of 40 min, indicated a maximum percentage removal of 86% for initial concentration of 10 ppm OTC. Al-biochar beads showed the maximum percentage removal at pH 10. 0.5 g of adsorbent was used to carry out all batch experiments at room temperature. The adsorption fitted Freundlich adsorption isotherm and intraparticle diffusion kinetics.

Modulating alginate-polyurethane elastomer properties: Influence of NCO/OH ratio with aliphatic diisocyanate.

This research addresses the need for enhanced biomaterials by investigating the influence of the NCO/OH ratio on sodium alginate-based polyurethane elastomers(Al-PUEs), offering novel insights into their structural, thermal, mechanical and swelling behavior. Al-PUEs were prepared by blending the chain extenders with key ingredients in a specific molar ratio using aliphatic HMDI and HTPB monomers. The chemical linkages, crystalline behavior, homogeneity, and surface morphology of PUEs were evaluated by FT-IR, XRD, SEM, and EDX analysis. Thermo-mechanical studies were performed using TGA, DSC and tensile testing. Swelling behavior and absorption analysis were analyzed in DMSO and water. The analysis indicated that the hydrophilicity and swelling behavior of the prepared PUEs were affected by the addition of sodium alginate content. The results exhibit the tailor-made network structure of Al-PUEs, resulting in better thermal stability, elasticity of materials via stress-strain behavior and marvelous characteristic features than traditional high-tech yields. Furthermore, the resulting Al-PUEs are potential candidates for biomedical implants.

Sodium alginate-based indicator film with enhanced physicochemical properties induced by cellulose nanocrystals and monitor the freshness of chilled meat.

Intelligent indicator films with colorimetric pH indicator properties were developed, incorporating black soybean seed coat anthocyanin (BA), cellulose nanocrystals (CNC), and sodium alginate (SA) to monitor meat freshness. The effect of different CNC additions on the microstructure, water barrier properties of the films, and BA release kinetics were comprehensively investigated. The results showed that with the increasement of CNC addition, the mechanical properties of SA/BA/CNC films were improved, the water contact angle significantly increased from 51.6° to 69°. Moreover, water solubility, vapor adsorption, and permeability significantly decreased, indicating enhanced water barrier properties. The release kinetic results showed that BA was released rapidly within 72 h and slowly thereafter, and its release process was described by Fick's model. Films with 7 % and 10 % CNC had lower BA diffusion coefficients. Their diffusions were formulated as linear regression equations (y = nx + a), where R2 was >0.80 and n was <0.50. Structural characterization showed that CNC immobilized BA mainly through hydrogen bonding, forming compact network microstructures with SA and BA. Meat freshness monitoring results showed that the film containing 7 % CNC showed visible color changes with increasing total volatile basic nitrogen and pH, along with low BA release, high water barrier and mechanical properties. Therefore, CNC has great potential for improving the physicochemical properties of indicator films, and the intelligent colorimetric indicator film could be applied to various food product.

Pericardial Delivery of Sodium Alginate-Infusible Extracellular Matrix Composite Hydrogel Promotes Angiogenesis and Intercellular Electrical Conduction after Myocardial Infarction.

Injectable extracellular matrix (iECM) is a versatile biological material with beneficial properties such as good degradability, promotion of cell survival, immunomodulation, and facilitation of vascular formation. However, intravenous injection of iECM faces challenges like a short retention time in vivo and low concentration at the lesion site. To address these issues, we prepared a composite hydrogel composed of sodium alginate and iECM and administered it via intrapericardial injection, forming a structure akin to cardiac patches within the pericardium. Compared with intramyocardial injection, intrapericardial injection avoids direct myocardial injury and ectopic tumor formation, offering less invasiveness and better biocompatibility. This study demonstrates that the sodium alginate/infusible extracellular matrix (SA/iECM) composite hydrogel can effectively prolong the local retention time of iECM in the heart, enhance electrical conduction between cardiomyocytes, promote angiogenesis at ischemic myocardial sites, inhibit apoptosis in the infarcted region, mitigate left ventricular remodeling postmyocardial infarction (MI), and improve cardiac function after infarction. Precise coordination of cardiomyocyte contraction and relaxation depends on the rhythmic occurrence of calcium-dependent action potentials. Cardiac dysfunction is partially attributed to the disruption of the excitation-contraction coupling (ECC) mechanism, which is associated with prolonged intracellular Ca2+ transients and alterations in contraction and relaxation Ca2+ levels. Our results show that the SA/iECM composite hydrogel improves electrical conduction, as evidenced by increased Cx43 expression and enhanced intercellular electrical connectivity. This research establishes that intrapericardial injection of a SA/iECM composite hydrogel is a safe and effective treatment modality, providing a theoretical basis for the use of biomaterials in MI therapy.

Honeycomb-like biomimetic scaffold by functionalized antibacterial hydrogel and biodegradable porous Mg alloy for osteochondral regeneration.

Introduction: Osteochondral repair poses a significant challenge due to its unique pathological mechanisms and complex repair processes, particularly in bacterial tissue conditions resulting from open injuries, infections, and surgical contamination. This study introduces a biomimetic honeycomb-like scaffold (Zn-AlgMA@Mg) designed for osteochondral repair. The scaffold consists of a dicalcium phosphate dihydrate (DCPD)-coated porous magnesium scaffold (DCPD Mg) embedded within a dual crosslinked sodium alginate hydrogel (Zn-AlgMA). This combination aims to synergistically exert antibacterial and osteochondral integrated repair properties. Methods: The Zn-AlgMA@Mg scaffold was fabricated by coating porous magnesium scaffolds with DCPD and embedding them within a dual crosslinked sodium alginate hydrogel. The structural and mechanical properties of the DCPD Mg scaffold were characterized using scanning electron microscopy (SEM) and mechanical testing. The microstructural features and hydrophilicity of Zn-AlgMA were assessed. In vitro studies were conducted to evaluate the controlled release of magnesium and zinc ions, as well as the scaffold's osteogenic, chondrogenic, and antibacterial properties. Proteomic analysis was performed to elucidate the mechanism of osteochondral integrated repair. In vivo efficacy was evaluated using a rabbit full-thickness osteochondral defect model, with micro-CT evaluation, quantitative analysis, and histological staining (hematoxylin-eosin, Safranin-O, and Masson's trichrome). Results: The DCPD Mg scaffold exhibited a uniform porous structure and superior mechanical properties. The Zn-AlgMA hydrogel displayed consistent microstructural features and enhanced hydrophilicity. The Zn-AlgMA@Mg scaffold provided controlled release of magnesium and zinc ions, promoting cell proliferation and vitality. In vitro studies demonstrated significant osteogenic and chondrogenic properties, as well as antibacterial efficacy. Proteomic analysis revealed the underlying mechanism of osteochondral integrated repair facilitated by the scaffold. Micro-CT evaluation and histological analysis confirmed successful osteochondral integration in the rabbit model. Discussion: The biomimetic honeycomb-like scaffold (Zn-AlgMA@Mg) demonstrated promising results for osteochondral repair, effectively addressing the challenges posed by bacterial tissue conditions. The scaffold's ability to release magnesium and zinc ions in a controlled manner contributed to its significant osteogenic, chondrogenic, and antibacterial properties. Proteomic analysis provided insights into the scaffold's mechanism of action, supporting its potential for integrated osteochondral regeneration. The successful in vivo results highlight the scaffold's efficacy, making it a promising biomaterial for future applications in osteochondral repair.

Mitigating effect of fucoidan versus sodium alginate on quality degradation of frozen dough and final steamed bread.

The impact of fucoidan (FD) and sodium alginate (SA) addition (0.3, 0.6, and 0.9 g/100 g wheat flour, dry basis) and freezing time on the rheology, water, structural characteristics of dough, and the quality of end steamed bread was explored in this study. The results showed FD was more effective in improving the textural characteristics of frozen dough compared with SA. Meanwhile, the freezable and free water content of SA dough were lower than those of FD dough, with the most pronounced effect observed at 0.9%. Adding SA increased the storage modulus, loss modulus, and disulfide bond content of the dough. The addition of FD induced a denser gluten protein network with fewer pores. Furthermore, the addition of FD reduced the hardness and chewiness of steamed bread and increased its specific volume and lightness. Overall, FD could alleviate the quality deterioration of frozen dough and the corresponding steamed bread.

Sodium alginate hydrogel encapsulating microglia cell lysate subjected to serum starvation for mitigating glioma cells.

Glioma is the most common malignant tumor in the brain, accounting for over 80% of all primary intracranial tumors. The current clinical treatment has shown certain limitations. Although M1 type microglia can secrete various pro-inflammatory cytokines and are expected to be used for glioma treatment, direct use of microglia may lead to overactivation and trigger immune storms. Therefore, we first found that serum starvation can stimulate the transformation of microglia into M1 type. Subsequently, we found through comparative experiments that the inhibitory effect of microglial cell lysis medium on glioma cells was stronger than that of microglial cell culture medium. Finally, we successfully prepared sodium alginate hydrogel loaded with microglia lysis solution to achieve sustained inhibitory effect on the growth of glioma and avoid its proliferation.

Comparison of different hydroxyapatite composites for bone tissue repair: In vitro and in vivo analyses.

Objectives: The material used for bone tissue repair needs to be simultaneously osteoconductive, osteoinductive, and osteogenic. To overcome this problem, researchers combine hydroxyapatite (HA) with natural materials to improve properties. This paper compares the effects of angiogenesis and osteogenesis with different composites through in vivo experiments and characterization analysis. Materials and Methods: Chitosan/nHA (CS/nHA) and sodium alginate/nHA (SA/nHA) microspheres were synthesized via reverse-phase emulsification crosslinking and analyzed using scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS), and X-ray diffraction (XRD). Implanted into mouse thigh muscles, their angiogenic and osteogenic potentials were assessed after 8 and 12 weeks through various staining methods and immunohistochemistry. Results: The mean vascular density (MVD) of CS/nHA, CaP/nHA, and SA/nHA groups was (134.92±35.30) n/mm2, (159.09±22.14) n/mm2, (160.31±42.23) n/mm2 at 12 weeks, respectively. The MVD of the CaP/nHA and SA/nHA groups were significantly higher than that of the CS/nHA group. The collagen volume fractions (CVF) were 34.13%, 51.53%, and 54.96% in the CS/nHA, CaP/nHA, and SA/nHA groups, respectively. In addition, the positive expression area ratios of OPN and CD31 in the CaP/nHA and SA/nHA groups were also significantly higher than those in the CS/nHA group. Conclusion: The ability of SA/nHA composite microspheres in osteogenesis and angiogenesis is clearly superior to that of the CS/nHA group and is comparable to that of CaP/nHA, which has superior osteogenesis ability, indicating that SA/nHA composite microspheres have greater application prospects in bone tissue engineering.

Influences of ultrasonic treatment on the physicochemical properties and microstructure of diacylglycerol-loaded emulsion stabilized with soybean protein isolate and sodium alginate.

This study examined the impacts of ultrasonic power (0, 150, 300, 450, 600, and 750 W) and ultrasonic durations (3, 6, 9, 12, and 15 min) on the physicochemical properties and microstructure of diacylglycerol (DAG)-loaded emulsions stabilized with soybean protein isolate (SPI) and sodium alginate (SA). The findings indicated that the smallest particle size, zeta potential, and contact angle for SPI-SA-DAG emulsions were respectively 5.58 µm, -49.85 mV, and 48.65°, achieved at an ultrasonic power of 450 W. The emulsification properties, loss modulus, storage modulus, and apparent viscosity of the emulsions were optimal at this power setting and at a duration of 9 min. Analytical techniques, including confocal laser scanning-, scanning electron-, and atomic force microscopy, revealed that ultrasonication significantly altered emulsion aggregation state, with the surface roughness (Rq) being minimized at 450 W. These results demonstrated that the stability of SPI-SA-DAG emulsions can be effectively enhanced by an appropriate ultrasonic treatment at 450 W for 9 min. This research provides theoretical support for the broad application of sonication techniques in the food industry.

Self-healable, stimuli-responsive bio-ionic liquid and sodium alginate conjugated hydrogel with tunable Injectability and mechanical properties for the treatment of breast cancer.

Designing stimuli-responsive drug delivery vehicles with higher drug loading capacity, sustained and targeted release of anti-cancer drugs and able to mitigate the shortcomings of traditional systems is need of hour. Herein, we designed stimuli-responsive, self-healable, and adhesive hydrogel through synergetic interaction between [Cho][Gly] (Choline-Glycine) and sodium alginate (SA). The hydrogel was formed as a result of non-covalent interaction between the components of the mixture forming the fibre kind morphology; confirmed through FTIR/computational analysis and SEM/AFM images. The hydrogel exhibited excellent mechanical strength, self-healing ability, adhesive character and most importantly; adjustable injectability. In vitro biocompatibility of the hydrogel was tested on HaCaT and MCF-7 cells, showing >92 % cell viability after 48 h. The hemolysis ratio (<4 %) of the hydrogel confirmed the blood compatibility of the hydrogel. When tested for drug-loading capacity, the hydrogel show 1500 times drug loading for the 5-fluorouracil (5-FU) against the SA based hydrogel. In vitro release data indicated that 5-FU have more preference towards the cancerous cell condition, i.e. acidic pH (>85 %), whereas the drug-loaded hydrogel successfully killed the MCF-7 and HeLa cell with a

Preparation and characterization of agarose-sodium alginate hydrogel beads for the co-encapsulation of lycopene and resveratrol nanoemulsion.

In the study, lycopene and resveratrol nanoemulsion hydrogel beads were prepared by using agarose­sodium alginate as a carrier and the semi-interpenetrating polymer network technique, characteristics and morphologies were evaluated by scanning electron microscopy, fluorescence microscopy, rheological measurement. The synergistic antioxidant effect of lycopene and resveratrol was confirmed, the best synergistic antioxidant performance is achieved when the ratio of 1:1. To increase the solubility and improve the stability, the lycopene was prepared as solid dispersion added to the nanoemulsion. The encapsulation rate of lycopene and resveratrol reached 93.60 ± 2.94 % and 89.30 ± 1.75 %, respectively, and the cumulative release showed that the addition of agarose slowed down the release rate of the compound, which improves the applicability of lycopene and resveratrol and development of carriers for the delivery of different bioactive ingredients.