Strontium zinc silicate simultaneously alleviates osteoporosis and sarcopenia in tail-suspended rats via Piezo1-mediated Ca2+ signaling.

Background: Long-term physical inactivity probably leads to a co-existence of osteoporosis and sarcopenia which result in a high risk of falls, fractures, disability and even mortality. However, universally applicable and feasible approaches are lacking in the concurrent treatment of osteoporosis and sarcopenia. In this study, we evaluated the effect of strontium zinc silicate bioceramic (SZS) extract on osteoporosis and sarcopenia and explored its underlying mechanisms. Methods: Hindlimb osteoporosis and sarcopenia were established in a tail-suspended rat model. The bones were conducted µCT scanning, histological examination, and gene expression analysis, and the muscles were conducted histological examination and gene expression analysis. In vitro, the effect of SZS extract on osteoblasts was determined by alizarin red S staining, immunofluorescence and qPCR. Similarly, the effect of SZS extract on myoblasts was determined by immunofluorescence and qPCR.. At last, the role of Piezo1 and the change of intracellular calcium ion (Ca2+) were explored through blockading the Piezo1 by GsMTx4 in MC3T3-E1 and C2C12 cells, respectively. Results: We found that SZS extract could concurrently and efficiently prevent bone structure deterioration, muscle atrophy and fibrosis in hind limbs of the tail-suspended rats. The in vivo study also showed that SZS extract could upregulate the mRNA expression of Piezo1, thereby maintaining the homeostasis of bones and muscles. In vitro study demonstrated that SZS extract could promote the proliferation and differentiation of MC3T3-E1 and C2C12 cells by increasing the intracellular Ca2+ in a Piezo1-dependent manner. Conclusion: This study demonstrated that SZS extract could increase Piezo1-mediated intracellular Ca2+, and facilitate osteogenic differentiation of osteoblast and myogenic differentiation of myoblasts, contributing to alleviation of osteoporosis and sarcopenia in a tail-suspended rat model. The translational potential of this article: The current study might provide a universally applicable and efficient strategy to treat musculoskeletal disorders based on bioactive ceramics. The verification of the role of Piezo1-modulated intracellular Ca2+ during osteogenesis and myogenesis provided a possible therapeutic target against mechanical related diseases.

3D printing of strontium-enriched biphasic calcium phosphate scaffolds for bone regeneration.

Calcium phosphate (CaP) scaffolds doping with therapeutic ions are one of the focuses of recent bone tissue engineering research. Among the therapeutic ions, strontium stands out for its role in bone remodeling. This work reports a simple method to produce Sr-doped 3D-printed CaP scaffolds, using Sr-doping to induce partial phase transformation from ß-tricalcium phosphate (ß-TCP) to hydroxyapatite (HA), resulting in a doped biphasic calcium phosphate (BCP) scaffold. Strontium carbonate (SrCO3) was incorporated in the formulation of the 3D-printing ink, studying ß-TCP:SrO mass ratios of 100:0, 95:5, and 90:10 (named as ß-TCP, ß-TCP/5-Sr, and ß-TCP/10-Sr, respectively). Adding SrCO3 in the 3D-printing ink led to a slight increase in viscosity but did not affect its printability, resulting in scaffolds with a high printing fidelity compared to the computational design. Interestingly, Sr was incorporated into the lattice structure of the scaffolds, forming hydroxyapatite (HA). No residual SrO or SrCO3 were observed in the XRD patterns of any composition, and HA was the majority phase of the ß-TCP/10-Sr scaffolds. The addition of Sr increased the compression strength of the scaffolds, with both ß-TCP/5-Sr and ß-TCP/10-Sr performing better than the ß-TCP. Overall, ß-TCP/5-Sr presented higher mineralized nodules and mechanical strength, while ß-TCP scaffolds presented superior cell viability. The incorporation of SrCO3 in the ink formulation is a viable method to obtain Sr-BCP scaffolds. Thus, this approach could be explored with other CaP scaffolds aiming to optimize their performance and the addition of alternative therapeutic ions.

Advancing thermoelectric potential: strontium telluride under compression strain analyzed with HSE hybrid functional and Wannier interpolation.

In the present era, the energy sector is undergoing an intense transformation, which encourages numerous research efforts aimed at reducing and reusing energy waste. One of the main areas of focus is thermoelectric energy, where telluride compounds have attracted researchers due to their remarkable ability to convert thermal energy into electrical energy. We focused this study on finding out how well strontium telluride (SrTe) can be used to generate thermoelectric power by testing it under up to 10% compression strain. We have used advanced computational approaches to increase the accuracy of our results, specifically the HSE hybrid functional with the Wannier interpolation method. This method is primarily employed to analyze electronic properties; however, our research extends its utility to investigate thermoelectric characteristics. Our findings provide accurate predictions for both electronic and thermoelectric properties. The above method has successfully achieved a significant improvement of 58% in the electronic band gap value, resulting in a value of 2.83 eV, which closely matches the experimental results. Furthermore, the Figure of Merit 0.95 is obtained, which is close to the ideal range. Both the band gap value and the thermoelectric figure of merit decrease when the compression strain is increased. These findings emphasize the importance of using SrTe under specific conditions. The findings of this work provide motivation for future researchers to investigate the environmental changes in the thermoelectric potential of SrTe.

Impact of anti-fracture medications on bone material and strength properties: a systematic review and meta-analysis.

Background and aims: Reduced bone mineral density (BMD) and microarchitectural deterioration contribute to increased fracture risk. Although the effects of anti-fracture medications (AFMs) on BMD are well-documented, their impact on bone material properties (BMPs) remains poorly characterized. Accordingly, we conducted a systematic review and meta-analysis to evaluate the effects of AFMs on BMPs. Based on data availability, we further categorized AFMs into anti-resorptives, bisphosphonates alone, and strontium ranelate subgroups to perform additional analyses of BMPs in osteoporotic patients. Methods: We did a comprehensive search of three databases, namely, PubMed, Web of Science, and Google Scholar, using various permutation combinations, and used Comprehensive Meta-Analysis software to analyze the extracted data. Results: The 15 eligible studies (randomized and non-randomized) compared the following: (1) 301 AFM-treated patients with 225 on placebo; (2) 191 patients treated with anti-resorptives with 131 on placebo; (3) 86 bisphosphonate-treated patients with 66 on placebo; and (4) 84 strontium ranelate-treated patients with 70 on placebo. Pooled analysis showed that AFMs significantly decreased cortical bone crystallinity [standardized difference in means (SDM) -1.394] and collagen maturity [SDM -0.855], and collagen maturity in cancellous bone [SDM -0.631]. Additionally, anti-resorptives (bisphosphonates and denosumab) significantly increased crystallinity [SDM 0.387], mineral-matrix ratio [SDM 0.771], microhardness [SDM 0.858], and contact hardness [SDM 0.952] of cortical bone. Anti-resorptives increased mineral-matrix ratio [SDM 0.543] and microhardness [SDM 0.864] and decreased collagen maturity [SDM -0.539] in cancellous bone. Restricted analysis of only bisphosphonate-treated studies showed a significant decrease in collagen maturity [SDM -0.650] in cancellous bone and an increase in true hardness [SDM 1.277] in cortical bone. In strontium ranelate-treated patients, there was no difference in BMPs compared to placebo. Conclusion: Collectively, our study suggests that AFMs improve bone quality, which explains their anti-fracture ability that is not fully accounted for by increased BMD in osteoporosis patients.

Use of Zebrafish (Danio rerio) for Biosafety Evaluation of Strontium Nanostructured Hydroxyapatite.

Despite the numerous studies on biocompatibility with nano-biomaterials, the biological effects of strontium-substituted HA nanoparticles (nSrHA) need to be better understood. So, we conducted an embryotoxicity test using zebrafish (Danio rerio) according to the OECD 236 guideline, a model that represents a viable alternative that bridges the gap between in vitro and mammalian models. Zebrafish embryos were exposed for 120 h to microspheres containing nSrHA nanoparticles with low and high crystallinity, synthesized at temperatures of 5°C (nSrHA5) and 90°C (nSrHA90). We evaluated lethality, developmental parameters, and reactive oxygen species (ROS) production. The larval behavior was assessed at 168 hpf to determine if the biomaterials affected motor responses and anxiety-like behavior. The results showed that the survival rate decreased significantly for the nSrHA5 group (low crystalline particles), and an increase in ROS was also observed in this group. However, none of the biomaterials caused morphological changes indicative of toxicity during larval development. Additionally, the behavioral tests did not reveal any alterations in all experimental groups, indicating the absence of neurotoxic effects from exposure to the tested biomaterials. These findings provide valuable insights into the biosafety of modified HA-based nanostructured biomaterials, making them a promising strategy for bone tissue repair. As the use of hydroxyapatite-based biomaterials continues to grow, it is crucial to ensure rigorous control over the quality, reliability, and traceability of these materials.

Radionuclide Solid:liquid partitioning in an aged, reducing-grout wasteform recovered from a disposal facility.

The Saltstone Disposal Facility on the Savannah River Site in South Carolina disposes of Low-Level Waste in a reducing-grout waste form. Reducing grout is presently being evaluated as a subsurface disposal waste form at several other locations in the United States, as well as in Europe and Asia. The objective of this study was to collect core samples directly from the Saltstone Disposal Facility and measure desorption distribution coefficients (Kd; radionuclide concentration ratio of saltstone:liquid; (Bq/kg)/Bq/L)) and desorption apparent solubility values (ksp; radionuclide aqueous concentration (moles/L)). An important attribute of this study was that these tests were conducted with actual aged, grout waste form materials, not small-volume simulants prepared in a laboratory. The reducing grout is comprised of blast furnace slag, Class F fly ash, ordinary portland cement, and a radioactive salt waste solution generated during nuclear processing. The grout sample used in this study underwent hydrolyzation in the disposal facility for 30 months prior to measuring radionuclide leaching. Leaching experiments were conducted either in an inert (no oxygen) atmosphere to simulate conditions within the saltstone monolith prior to aging (becoming oxidized) or they were exposed to atmosphere conditions to simulate conditions of an aged saltstone. Importantly, these experiments were designed not to be diffusion limited, that is, the saltstone was ground finely and the suspensions were under constant agitation during the equilibration period. Under oxidized conditions, measured Tc Kd values were 10 mL/g, which was appreciably greater than the historical best-estimate value of 0.8 mL/g. This difference is likely the result of a fraction of the Tc remaining in the less soluble Tc(IV) form, even after extensive oxidation during the experiment. Under oxidized and reducing conditions, the measured Ba and Sr (both divalent alkaline earth metals) Kd value were more than an order of magnitude greater than historical best-estimate values of 100 mL/g. The unexpectedly high Ba and Sr Kd values were attributed to these radionuclides having sufficient time to age (form strong bonds) in the sulfur-rich saltstone sample. Apparent ksp values under reducing conditions were 10-9 mol/L Tc and 10-13 mol/L Pu, consistent with values measured with surrogate materials. Measured apparent Ba, Sr, and Th ksp values were significantly greater than historical best-estimates. The implications of the generally greater Kd values and lower ksp values in these measurements is that these cementitious waste forms have greater radionuclide retention than was previously estimated based on laboratory studies using surrogate materials. This work represents the first leaching study performed with an actual aged, reducing-grout sample and as such provides an important comparison to studies conducted with surrogate materials, and provides high pedigree data for other programs around the world evaluating reducing grouts as a wasteform for subsurface nuclear waste disposal.

Response Properties of Electrorheological Composite Hydrophilic Elastomers Based on Different Morphologies of Magnesium-Doped Strontium Titanate.

As smart materials, electrorheological elastomers (EREs) formed by pre-treating active electrorheological particles are attracting more and more attention. In this work, four Mg-doped strontium titanate (Mg-STO) particles with spherical, dendritic, flake-like, and pinecone-like morphologies were obtained via hydrothermal and low-temperature co-precipitation. XRD, SEM, Raman, and FT-IR were used to characterize these products. The results showed that Mg-STOs are about 1.5-2.0 µm in size, and their phase structures are dominated by cubic crystals. These Mg-STOs were dispersed in a hydrogel composite elastic medium. Then, Mg-STO/glycerol/gelatin electrorheological composite hydrophilic elastomers were obtained with or without an electric field. The electric field response properties of Mg-doped strontium titanate composite elastomers were investigated. We concluded that dendritic Mg-STO composite elastomers are high-performance EREs, and the maximum value of their energy storage was 8.70 MPa. The significant electrorheological performance of these products is helpful for their applications in vibration control, force transducers, smart structures, dampers, and other fields.

Casein phosphopeptide/antimicrobial peptide co-modified SrTiO3 nanotubes for prevention of bacterial infections and repair of bone defects.

Endowing titanium surfaces with multifunctional properties can reduce implant-related infections and enhance osseointegration. In this study, titanium dioxide nanotubes with strontium doping (STN) were first created on the titanium surface using anodic oxidation and hydrothermal synthesis techniques. Next, casein phosphopeptide (CCP) and an antimicrobial peptide (HHC36) were loaded into the STN with the aid of vacuum physical adsorption (STN-CP-H), giving the titanium surface a dual function of "antimicrobial-osteogenic". The surface of STN-CP-H has a suitable roughness and good hydrophilicity, which is conducive to osteoblasts. STN-CP-H had a 99 % antibacterial rate against S. aureus and E. coli and effectively prevented the growth of bacterial biofilm. Meanwhile, the antibacterial mechanism of STN-CP-H was initially explored with the help of transcriptome sequencing technology. STN-CP-H could greatly increase osteoblast adhesion, proliferation, and expression of osteogenic markers (alkaline phosphatase, runt-related transcription) when CCP and Sr worked together synergistically. In vivo, the STN-CP-H coating could effectively promote new osteogenesis around titanium implant bone and had no toxic effects on heart, liver, spleen, lung and kidney tissues. A potential anti-infection bone healing material, STN-CP-H bifunctional coating developed in this work efficiently inhibited bacterial infection of titanium implants and encouraged early osseointegration.

Fabrication of strontium ions substituted hydroxyapatite from the shells of the golden apple snail (Pomacea canaliculate L) with enhanced osteoconductive and improved biological properties.

The use of biogenic calcium ions for the source of hydroxyapatite (HAp or HA) are very common and have been being explored extensively. However, it usually results high crystalline HA, due to high reaction and decomposition temperatures. In this study, strontium (Sr2+) doped HA from the golden apple snail shells (Pomacea canaliculate L) was successfully synthesized. It was indicated that Sr ions completely replaced calcium (Ca) ions, increased the lattice constant, and consecutively reduced HA crystallinity. Smaller crystal size and ß-type carbonate (CO32-) ions substitution with Ca/P close to 1.67 molar ratio that mimic bone crystals were observed in Sr-doped HA, with significant increased rate of MC3T3-E1 cells viability and higher IC50 values. It was proven that Sr ions substitution resolved challenges on the use of biogenic sources for HA fabrication. Further in vivo study is needed to continue to valorise the results into real biomedical and clinical applications.

Applications of Bioactive Strontium Compounds in Dentistry.

Divalent cations have captured the interest of researchers in biomedical and dental fields due to their beneficial effects on bone formation. These metallic elements are similar to trace elements found in human bone. Strontium is a divalent cation commonly found in various biomaterials. Since strontium has a radius similar to calcium, it has been used to replace calcium in many calcium-containing biomaterials. Strontium has the ability to inhibit bone resorption and increase bone deposition, making it useful in the treatment of osteoporosis. Strontium has also been used as a radiopacifier in dentistry and has been incorporated into a variety of dental materials to improve their radiopacity. Furthermore, strontium has been shown to improve the antimicrobial and mechanical properties of dental materials, promote enamel remineralization, alleviate dentin hypersensitivity, and enhance dentin regeneration. The objective of this review is to provide a comprehensive review of the applications of strontium in dentistry.

Strontium isotopes in the atmosphere, geosphere and hydrosphere: Developing a systematic "fingerprinting" framework of rocks and water in sedimentary basins in eastern Australia.

Understanding the connection between aquifers, aquitards, and groundwater-dependant ecosystems remains a key challenge when developing a conceptual hydrogeological model. The aim of this study was to develop a systematic strontium isotope (87Sr/86Sr) fingerprinting framework of rocks and water within the sedimentary Surat and Clarence-Moreton basins (SCM basins) in eastern Australia - an area of extensive coal seam gas development and high potential for aquifer and groundwater-surface water connectivity. To do this, new groundwater samples (n = 298) were collected, analyzed and integrated with published data (n = 154) from the basins' major sedimentary, volcanic and alluvial aquifers, including the major coal seam gas target, the Walloon Coal Measures. Samples were also analyzed from rainfall (n = 2) and surface water (n = 40). In addition, rock core samples (n = 39) from exploration and stratigraphic wells were analyzed to determine the range of Sr isotope composition from host rocks. The analyses of cores demonstrate a distinct and systematic contrast in 87Sr/86Sr between different hydrogeological units. This confirms that all major hydrogeological units have a narrow range with unique 87Sr/86Sr population characteristics that are useful for guiding conceptual model development. Comparison with selected hydrochemical and groundwater age tracers (14C and 36Cl) suggests only limited changes of 87Sr/86Sr from recharge beds to the deeper parts of the basins or with a decrease in natural 14C and 36Cl tracer content along flow paths. Stream sampling during baseflow conditions confirms that 87Sr/86Sr in surface waters are similar to those of the underlying bedrock formations. We demonstrated that 87Sr/86Sr analyses of rocks and water provide a powerful hydrostratigraphic and chemostratigraphic fingerprinting framework in the SCM basins, enabling reliable assessments of plausible aquifer and groundwater-surface water interconnectivity pathways. Applied in other complex multi-aquifer sedimentary basins in Australia, and globally, a similar approach can help to constrain conceptual hydrogeological models and facilitate improved water resource management.

Modification of Ti3C2Tx nanostructure with KH2PO4 and chitosan for effective removal of strontium from nuclear waste.

Nanostructure titanium carbide MXene (Ti3C2Tx) was modified with KH2PO4 and chitosan to effectively remove strontium from nuclear wastewater. Nuclear waste includes radionuclides of uranium, thorium, strontium, and cesium, which are classified depending on the concentration of radionuclides. Nuclear waste with a high strontium concentration is the production waste of radiopharmaceutical production centers. Ti3C2Tx was synthesized from Ti3AlC2 using HF40% and HF in situ (MILD-Ti3C2Tx) in 24 h at 313.15 and 333.15 K. Morphology, structure, and functional groups were investigated using the XRD, SEM, EDS, FTIR, and BET analyses. The Sr(II)'s adsorption capacity on Ti3C2Tx-HF and Ti3C2Tx-HF in situ was obtained as 61.9 and 253.5 mg g-1, respectively (temperature, 298.15 K; pH, 7.00; contact time, 180 min; and Sr(II) concentration, 150 mg l-1). Ti3C2Tx-HF in situ showed fourfold adsorption due to more hydroxyl functional groups and larger interlayer spacing. Ti3C2Tx was modified with KH2PO4 and chitosan to investigate the mechanism of change of Sr(II)'s adsorption capacity, which increased to 370 and 284 mg g-1, respectively. The structural results of modified Ti3C2Tx showed that the surface functional groups increased when modified with chitosan. In addition, modification with KH2PO4, through encapsulating large amounts of KH2PO4 between Ti3C2Tx layers, increased the possibility of Sr(II) diffusion between layers and electrochemical interactions with hydroxyl groups, and thus, increased its adsorption. Some experiments were designed to investigate the effect of parameters like initial concentration of Sr(II), contact time, temperature, and pH solution, as well as modified- and unmodified-Ti3C2Tx on adsorbent. The results revealed that the adsorption process of Sr(II) with pristine and modified-Ti3C2Tx follows pseudo-second-order kinetics and Freundlich heterogeneous isotherm model. Freundlich model isotherm indicates the presence of various functional groups on the surface and between the pristine and modified Ti3C2Tx layers. Electrostatic reactions and intra-sphere complexation were the two dominant mechanisms of the adsorption process.

Novel White Phosphor Bi3+ co-doped SrCeO3: 2 wt% Sm3+ Synthesized via Fuel Excess Gel Combustion Synthesis for wLED Applications.

Co-doping strategy is done if the emission from the activator is relatively low with existing excitation energy. Thus, to enrich the emission from an activator, the sensitizer like Bi3+ is co-doped onto the host and this intermediator transfers its emission energy to the activator. Prior to the study, no investigations had been conducted, marking the foundational exploration of the sensitizer effect within the rare earth-doped SrCeO3 matrix aimed at enhancing luminescence properties. The current study focuses on the innovation of single-phase robust white phosphors, SrCeO3: 2wt% Sm3+: xBi3+ (x = 0 wt%, 0.5 wt%, 1 wt%, 1.5 wt%, 2 wt%) to coat near UV LED chips for high CRI wLED applications. The novel perovskites were synthesized using a low-temperature fuel excess gel combustion method, utilizing citric acid as the fuel and ammonium nitrate as an extra oxidizer. Upon co-doping SrCeO3: 2wt% Sm3+ with bismuth, the impact of changing sensitizer concentration on both the development of crystalline phases, morphology, elemental composition, band gap energy, and the luminescent properties of ceramic powders were explored through X-ray diffraction, FE-SEM, Energy dispersive spectra, UV-visible absorption spectra, and photoluminescence characterization methods. The experimental results revealed the orthorhombic single-phase formation of SrCeO3: 2wt% Sm3+: xBi3+perovskites yielding high crystallinity and luminescence maximum at critical sensitizer concentration 1 wt% Bi3+. Also, the bright white light emission of all the perovskites was confirmed using the CIE color diagram. Thus, nano-perovskite SrCe0.97Sm0.02O3: 1wt% Bi3+ acts as an inevitable direct phosphor coating the near UV chip in LEDs, which can be a great revolution in energy savings applications.

Insights from Ca2+→Sr2+ substitution on the mechanism of O-O bond formation in photosystem II.

In recent years, there has been a steady interest in unraveling the intricate mechanistic details of water oxidation mechanism in photosynthesis. Despite the substantial progress made over several decades, a comprehensive understanding of the precise kinetics underlying O-O bond formation and subsequent evolution remains elusive. However, it is well-established that the oxygen evolving complex (OEC), specifically the CaMn4O5 cluster, plays a crucial role in O-O bond formation, undergoing a series of four oxidative events as it progresses through the S-states of the Kok cycle. To gain further insights into the OEC, researchers have explored the substitution of the Ca2+ cofactor with strontium (Sr), the sole atomic replacement capable of retaining oxygen-evolving activity. Empirical investigations utilizing spectroscopic techniques such as XAS, XRD, EPR, FTIR, and XANES have been conducted to probe the structural consequences of Ca2+→Sr2+ substitution. In parallel, the development of DFT and QM/MM computational models has explored different oxidation and protonation states, as well as variations in ligand coordination at the catalytic center involving amino acid residues. In this review, we critically evaluate and integrate these computational and spectroscopic approaches, focusing on the structural and mechanistic implications of Ca2+→Sr2+ substitution in PS II. We contribute DFT modelling and simulate EXAFS Fourier transforms of Sr-substituted OEC, analyzing promising structures of the S3 state. Through the combination of computational modeling and spectroscopic investigations, valuable insights have been gained, developing a deeper understanding of the photosynthetic process.

Assessing Movements between Freshwater and Saltwater by Brown Trout (Salmo trutta L.) Based on Otolith Microchemistry.

By analyzing otolith microchemistry, we examined the use of freshwater and marine environments by brown trout Salmo trutta L. that spawn in the Swedish River Emån and migrate to the Baltic Sea. We estimated the time juveniles spent in freshwater and the number of times the fish returned to freshwater, presumably to spawn. Twenty-six percent of the fish migrated to sea by 1 year of age. However, 13% spent less than one year in the river. Most brown trout (48%) migrated to the sea between 1 and 2 years of age. On average, brown trout, which averaged 4.4 years in age (range 3-6 years), returned to freshwater 2.3 times, and there was an inverse relationship between time spent in freshwater after hatching and the number of visits to freshwater. Our results do not support the classical life history pattern, where brown trout spend one or more years in freshwater before migrating to the sea. Here, we found evidence that part of the population leaves freshwater during their first year. While the cause for precocial migration in the River Emån is not known, our results from this permanently flowing river do not support the idea proposed for other Baltic Sea populations, where the risk of drought has been suggested to be the cause.

Antimicrobial Potential of Strontium-Functionalized Titanium Against Bacteria Associated With Peri-Implantitis.

OBJECTIVES: To explore the antimicrobial potential of strontium (Sr)-functionalized wafers against multiple bacteria associated with per-implant infections, in both mono- and multispecies biofilms. MATERIALS AND METHODS: The bactericidal and bacteriostatic effect of silicon wafers functionalized with a strontium titanium oxygen coating (Sr-Ti-O) or covered only with Ti (controls) against several bacteria, either grown as a mono-species or multispecies biofilms, was assessed using a bacterial viability assay and a plate counting method. Mono-species biofilms were assessed after 2 and 24 h, while the antimicrobial effect on multispecies biofilms was assessed at Days 1, 3, and 6. The impact of Sr functionalization on the total percentage of Porphyromonas gingivalis in the multispecies biofilm, using qPCR, and gingipain activity was also assessed. RESULTS: Sr-functionalized wafers, compared to controls, were associated with statistically significant less viable cells in both mono- and multispecies tests. The number of colony forming units (CFUs) within the biofilm was significantly less in Sr-functionalized wafers, compared to control wafers, for Staphylococcus aureus at all time points of evaluation and for Escherichia coli at Day 1. Gingipain activity was less in Sr-functionalized wafers, compared to control wafers, and the qPCR showed that P. gingivalis remained below detection levels at Sr-functionalized wafers, while it consisted of 15% of the total biofilm on control wafers at Day 6. CONCLUSION: Sr functionalization displayed promising antimicrobial potential, possessing bactericidal and bacteriostatic ability against bacteria associated with peri-implantitis grown either as mono-species or mixed in a multispecies consortium with several common oral microorganisms.

Alginate-Sr/Mg Containing Bioactive Glass Scaffolds: The Characterization of a New 3D Composite for Bone Tissue Engineering.

In bone regeneration, combining natural polymer-based scaffolds with Bioactive Glasses (BGs) is an attractive strategy to improve the mechanical properties of the structure, as well as its bioactivity and regenerative potential. Methods: For this purpose, a well-studied alginate/hydroxyapatite (Alg/HAp) porous scaffold was enhanced with an experimental bioglass (BGMS10), characterized by a high crystallization temperature and containing therapeutic ions such as strontium and magnesium. This resulted in an improved biological response compared to 45S5 Bioglass®, the "gold" standard among BGs. Porous composite scaffolds were fabricated by freeze-drying technique and characterized by scanning electron microscopy and microanalysis, infrared spectroscopy, and microcomputed tomography. The mechanical properties and cytocompatibility of the new scaffold composition were also evaluated. The addition of bioglass to the Alg/HAp network resulted in a slightly lower porosity. However, despite the change in pore size, the MG-63 cells were able to better adhere and proliferate when cultured for one week on a BG scaffold compared to the control Alg/HAp scaffolds. Thus, our findings indicate that the combination of bioactive glass BGMS10 does not affect the structural and physicochemical properties of the Alg/HAp scaffold and confers bioactive properties to the structures, making the Alg/HAp-BGMS10 scaffold a promising candidate for future application in bone tissue regeneration.

Concentration-dependent luminescence characterization of terbium-doped strontium aluminate nanophosphors.

The present investigation describes the synthesis of luminescent terbium-doped strontium aluminate nanoparticles emitting bright green light, which were synthesized through a solid-state reaction method assisted by microwave radiation. Various samples containing different concentrations of Tb were synthesized, and an analysis of their structural and morphological features was conducted using powder x-ray diffraction, Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The band gaps of the samples were determined utilizing the Kubelka-Munk method. The quenching mechanism observed was identified to be due to dipole-dipole interaction using the Dexter theory. The optimized sample with a terbium concentration of 4 at.% has a luminescence lifetime of 1.05 ms with 20.62% quantum efficiency. The results of this study indicate that the terbium-doped strontium aluminate fluorescent nanoparticles exhibit promising potential for a wide range of applications, including bioimaging, sensing and solid-state lighting.

Integrating otolith and genetic tools to reveal intraspecific biodiversity in a highly impacted salmon population.

Intraspecific biodiversity is vital for species persistence in an increasingly volatile world. By embracing methods that integrate information at different spatiotemporal scales, we can directly monitor and reconstruct changes in intraspecific biodiversity. Here we combined genetics and otolith biochronologies to describe the genotypic and phenotypic diversity of Chinook salmon (Oncorhynchus tshawytscha) in the Yuba River, California, comparing cohorts that experienced a range of hydroclimatic conditions. Yuba River salmon have been heavily impacted by habitat loss and degradation, and large influxes of unmarked hatchery fish each year have led to concern about introgression and uncertainty around the viability of its wild populations, particularly the rarer spring-run salmon. Otolith strontium isotopes showed that Yuba River origin fish represented, on average, 42% (range 7%-73%) of spawners across six return years (2009-2011, 2018-2020), with large interannual variability. The remainder of adult Chinook salmon in the river were primarily strays from the nearby Feather River hatchery, and since 2018 from the Mokelumne River hatchery. Among the Yuba-origin spawners, on average, 30% (range 14%-50%) exhibited the spring-run genotype. The Yuba-origin fish also displayed a variety of outmigration phenotypes that differed in the timing and size at which they left the Yuba river. Early-migrating fry dominated the returns (mean 59%, range 33%-89%), and their contribution rates were negatively correlated with freshwater flows. It is unlikely that fry survival rates are elevated during droughts, suggesting that this trend reflects disproportionately low survival of larger later migrating parr, smolts, and yearlings along the migratory corridor in drier years. Otolith daily increments indicated generally faster growth rates in non-natal habitats, emphasizing the importance of continuing upstream restoration efforts to improve in-river growing conditions. Together, these findings show that, despite a long history of habitat degradation and hatchery introgression, the Yuba River maintains intraspecific biodiversity that should be taken into account in future management, restoration, and reintroduction plans. The finding that genotypic spring-run are reproducing, surviving, and returning to the Yuba River every year suggests that re-establishment of an independent population is possible, although hatchery-wild interactions would need to be carefully considered. Integrating methods is critical to monitor changes in key genetic, physiological, and behavioral traits to assess population viability and resilience.

ECM-Mimicking Strontium-Doped Nanofibrous Microspheres for Periodontal Tissue Regeneration in Osteoporosis.

Regenerating periodontal defects in osteoporosis patients presents a significant clinical challenge. Unlike the relatively straightforward regeneration of homogeneous bone tissue, periodontal regeneration requires the intricate reconstruction of the cementum-periodontal ligament-alveolar bone interface. Strontium (Sr)-doped biomaterials have been extensively utilized in bone tissue engineering due to their remarkable pro-osteogenic attributes. However, their application in periodontal tissue regeneration has been scarcely explored. In this study, we synthesized an innovative injectable Sr-BGN/GNM scaffold by integrating Sr-doped bioactive glass nanospheres (Sr-BGNs) into the nanofiber architecture of gelatin nanofiber microspheres (GNMs). This design, mimicking the natural bone extracellular matrix (ECM), enhanced the scaffold's mechanical properties and effectively controlled the sustained release of Sr ions (Sr2+), thereby promoting the proliferation, osteogenic differentiation, and ECM secretion of PDLSCs and BMSCs, as well as enhancing vascularization in endothelial cells. In vivo experiments further indicated that the Sr-BGNs/GNMs significantly promoted osteogenesis and angiogenesis. Moreover, the scaffold's tunable degradation kinetics optimized the prolonged release and pro-regenerative effects of Sr2+ in vivo, matching the pace of periodontal regeneration and thereby facilitating the regeneration of functional periodontal tissues under osteoporotic conditions. Therefore, Sr-BGNs/GNMs emerge as a promising candidate for advancing periodontal regeneration strategies.