Enhanced environmental stress resistance and functional properties of the curcumin-shellac nano-delivery system: Anti-flocculation of poly-γ-glutamic acid.

Curcumin was widely designed as nanoparticles to remove application restrictions. The occurrence of flocculation is a primary factor limiting the application of the curcumin nano-delivery system. To enhance the environmental stress resistance and functional properties of shellac-curcumin nanoparticles (S-Cur-NPs), γ-polyglutamic acid (γ-PGA) was utilized as an anti-flocculant. The encapsulation efficiency and loading capacity of S-Cur-NPs were also improved with γ-PGA incorporation. FTIR and XRD analysis confirmed the presence of amorphous characteristics in S-Cur-NPs and the combination of γ-PGA and shellac was driven by hydrogen bonding. The hydrophilic, thermodynamic, and surface potential of S-Cur-NPs was improved by the incorporation of γ-PGA. This contribution of γ-PGA on S-Cur-NPs effectively mitigated the flocculation occurrence during heating, storage, and in-vitro digestive treatment. Furthermore, it was revealed that γ-PGA enhanced the antibacterial and antioxidant properties of S-Cur-NPs and effectively protected the functional activity against heating, storage, and in-vitro digestion. Release studies conducted in simulated gastrointestinal fluids revealed that S-Cur-NPs have targeted intestinal release properties. Overall, the design of shellac with γ-PGA was a promising strategy to relieve the application stress of shellac and curcumin in the food industry.

Chitosan oligosaccharide-functionalized nano-prodrug for cascade chemotherapy through oxidative stress amplification.

Redox nanoparticles have been extensively developed for chemotherapy. However, the intracellular oxidative stress induced by constant aberrant glutathione (GSH), reactive oxygen species (ROS) and gamma-glutamyl transpeptidase (GGT) homeostasis remains the primary cause of evading tumor apoptosis. Herein, an oxidative stress-amplification strategy was designed using a pH-GSH-H2O2-GGT sensitive nano-prodrug for precise synergistic chemotherapy. The disulfide bond- conjugated doxorubicin prodrug (DOX-ss) was constructed as a GSH-scavenger. Then, phenylboronic acid (PBA), DOX-ss and poly (γ-glutamic acid) (γ-PGA) were successively conjugated using chitosan oligosaccharide (COS) to obtain the nano-prodrug PBA-COS-ss-DOX/γ-PGA. The PBA-COS-ss-DOX/γ-PGA prodrug could tightly attach to the polymer chain segment by atom transfer radical polymerization. Simultaneously, the drug interacted relatively weakly with the polymer by encapsulating ionic crosslinkers in DOX@PBA-COS/γ-PGA. The disulfide bond of the DOX-ss prodrug as a GSH-scavenger could be activated using overexpressed GSH to release DOX. Particularly, PBA-COS-ss-DOX/γ-PGA could prevent premature drug leakage and facilitate DOX delivery by GGT-targeting and intracellular H2O2-cleavable linker in human hepatocellular carcinoma (HepG2) cells. Concurrently, the nano-prodrug induced strong oxidative stress and tumor cell apoptosis. Collectively, the pH-GSH-H2O2-GGT responsive nano-prodrug shows potential for synergistic tumor therapy.

Enzyme-Triggered Polyelectrolyte Complex for Responsive Delivery of α-Helical Polypeptides to Optimize Antibacterial Therapy.

Responsive nanomaterials hold significant promise in the treatment of bacterial infections by recognizing internal or external stimuli to achieve stimuli-responsive behavior. In this study, we present an enzyme-responsive polyelectrolyte complex micelles (PTPMN) with α-helical cationic polypeptide as a coacervate-core for the treatment of Escherichia coli (E. coli) infection. The complex was constructed through electrostatic interaction between cationic poly(glutamic acid) derivatives and phosphorylation-modified poly(ethylene glycol)-b-poly(tyrosine) (PEG-b-PPTyr) by directly dissolving them in aqueous solution. The cationic polypeptide adopted α-helical structure and demonstrated excellent broad-spectrum antibacterial activity against both Gram-negative and Gram-positive bacteria, with a minimum inhibitory concentration (MIC) as low as 12.5 µg mL-1 against E. coli. By complexing with anionic PEG-b-PPTyr, the obtained complex formed ß-sheet structures and exhibited good biocompatibility and low hemolysis. When incubated in a bacterial environment, the complex cleaved its phosphate groups triggered by phosphatases secreted by bacteria, exposing the highly α-helical conformation and restoring its effective bactericidal ability. In vivo experiments confirmed accelerated healing in E. coli-infected wounds.

Toward Synthetic Intrinsically Disordered Polypeptides (IDPs): Controlled Incorporation of Glycine in the Ring-Opening Polymerization of N-Carboxyanhydrides.

Intrinsically disordered proteins (IDPs) do not have a well-defined folded structure but instead behave as extended polymer chains in solution. Many IDPs are rich in glycine residues, which create steric barriers to secondary structuring and protein folding. Inspired by this feature, we have studied how the introduction of glycine residues influences the secondary structure of a model polypeptide, poly(l-glutamic acid), a helical polymer. For this purpose, we carried out ring-opening copolymerization with γ-benzyl-l-glutamate and glycine N-carboxyanhydride (NCA) monomers. We aimed to control the glycine distribution within PBLG by adjusting the reactivity ratios of the two NCAs using different reaction conditions (temperature, solvent). The relationship between those conditions, the monomer distributions, and the secondary structure enabled the design of intrinsically disordered polypeptides when a highly gradient microstructure was achieved in DMSO.

Balancing mechanical property and swelling behavior of bacterial cellulose film by in-situ adding chitosan oligosaccharide and covalent crosslinking with γ-PGA.

Bacterial cellulose (BC) is an ideal candidate material for drug delivery, but the disbalance between the swelling behavior and mechanical properties limits its application. In this work, covalent crosslinking of γ-polyglutamic acid (γ-PGA) with the chitosan oligosaccharide (COS) embedded in BC was designed to remove the limitation. As a result, the dosage, time, and batch of COS addition significantly affected the mechanical properties and the yield of bacterial cellulose complex film (BCCF). The addition of 2.25 % COS at the incubation time of 0.5, 1.5, and 2 d increased the Young's modulus and the yield by 5.65 and 1.42 times, respectively, but decreased the swelling behavior to 1774 %, 46 % of that of native BC. Covalent γ-PGA transformed the dendritic structure of BCCF into a spider network, decreasing the porosity and increasing the swelling behavior by 3.46 times. The strategy balanced the swelling behavior and mechanical properties through tunning hydrogen bond, electrostatic interaction, and amido bond. The modified BCCF exhibited a desired behavior of benzalkonium chlorides transport, competent for drug delivery. Thereby, the strategy will be a competent candidate to modify BC for such potential applications as wound dressing, artificial skin, scar-inhibiting patch, and so on.

Layer-by-layer assembly of quercetin-loaded zein/γPGA/low-molecular-weight chitosan/fucoidan nanosystem for targeting inflamed blood vessels.

Chitosan acts as a versatile carrier in polymeric nanoparticle (NP) for diverse drug administration routes. Delivery of antioxidants, such as quercetin (Qu) showcases potent antioxidant and anti-inflammatory properties for reduction of various cardiovascular diseases, but low water solubility limits uptake. To address this, we developed a novel layer-by-layer zein/gamma-polyglutamic acid (γPGA)/low-molecular-weight chitosan (LC)/fucoidan NP for encapsulating Qu and targeting inflamed vessel endothelial cells. We used zein (Z) and γPGA (r) to encapsulate Qu (Qu-Zr NP) exhibited notably higher encapsulation efficiency compared to zein alone. Qu-Zr NP coated with LC (Qu-ZrLC2 NP) shows a lower particle size (193.2 ± 2.9 nm), and a higher zeta potential value (35.2 ± 0.4 mV) by zeta potential and transmission electron microscopy analysis. After coating Qu-ZrLC2 NP with fucoidan, Qu-ZrLC2Fa NP presented particle size (225.16 ± 0.92 nm), zeta potential (-25.66 ± 0.51 mV) and maintained antioxidant activity. Further analysis revealed that Qu-ZrLC2Fa NP were targeted and taken up by HUVEC cells and EA.hy926 endothelial cells. Notably, we observed Qu-ZrLC2Fa NP targeting zebrafish vessels and isoproterenol-induced inflamed vessels of rat. Our layer-by-layer formulated zein/γPGA/LC/fucoidan NP show promise as a targeted delivery system for water-insoluble drugs. Qu-ZrLC2Fa NP exhibit potential as an anti-inflammatory therapeutic for blood vessels.

Layer-by-layer self-assembly embedding of nattokinase in chitosan/γ-polyglutamic acid: Preparation, fibrinolytic activity, stability, and in vitro digestion study.

Nattokinase (NK) is a thrombolytic enzyme extracted from natto, which can be used to prevent and treat blood clots. However, it is sensitive to the environment, especially the acidic environment of human stomach acid, and its effect of oral ingestion is minimal. This study aims to increase NK's oral and storage stability by embedding NK in microcapsules prepared with chitosan (CS) and γ-polyglutamic acid (γ-PGA). The paper prepared a double-layer NK oral delivery system by layer self-assembly and characterized its stability and in vitro simulated digestion. According to the research results, the bilayer putamen structure has a protective effect on NK, which not only maintains high activity in various environments (such as acid-base, high temperature) and long-term storage (60 days), but also effectively protects the loaded NK from being destroyed in gastric fluid and achieves its slow release. This work has proved the feasibility of the design of bilayer putamen structure in oral administration and has good fibrolytic activity. Therefore, the novel CS/γ-PGA microcapsules are expected to be used in nutraceutical delivery systems.

Examining the wound healing potential of curcumin-infused electrospun nanofibers from polyglutamic acid and gum arabic.

Advancements in medicine have led to continuous enhancements and innovations in wound dressing materials, making them pivotal in medical care. We used natural biological macromolecules, γ-polyglutamic acid and gum arabic as primary raw materials to create nanofibers laden with curcumin by blending electrostatic spinning technology in the current investigation. These nanofibers were meticulously characterized using fluorescence microscopy, scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Our comprehensive analyses confirmed the successful encapsulation of curcumin within the nanofiber carrier and it has uniform diameter, good water absorption and mechanical properties. Subsequently, we evaluated the antimicrobial effects of these curcumin-loaded nanofibers against Staphylococcus aureus through an oscillating flask method. We created a mouse model with acute full-thickness skin defects to further investigate the wound healing potential. We conducted various biochemical assays to elucidate the mechanism of action. The results revealed that curcumin nanofibers profoundly impacted wound healing. They bolstered the expression of TGF-ß1 and VEGF and reduced the expression of inflammatory factors, leading to an accelerated re-epithelialization process, enhanced wound contraction, and increased regeneration of new blood vessels and hair follicles. Furthermore, these nanofibers positively influenced the proportion of three different collagen types. This comprehensive study underscores the remarkable potential of curcumin-loaded nanofibers to facilitate wound healing and lays a robust experimental foundation for developing innovative, natural product-based wound dressings.

Fabrication of yeast ß-glucan/sodium alginate/γ-polyglutamic acid composite particles for hemostasis and wound healing.

Particles with a porous structure can lead to quick hemostasis and provide a good matrix for cell proliferation during wound healing. Recently, many particle-based wound healing materials have been clinically applied. However, these products show good hemostatic ability but with poor wound healing ability. To solve this problem, this study fabricated APGG composite particles using yeast ß-glucan (obtained from Saccharomyces cerevisiae), sodium alginate, and γ-polyglutamic acid as the starting materials. The structure of yeast ß-glucan was modified with many carboxymethyl groups to obtain carboxymethylated ß-glucan, which could coordinate with Ca2+ ions to form a crosslinked structure. A morphology study indicated that the APGG particles showed an irregular spheroidal structure with a low density (<0.1 g cm-3) and high porosity (>40%). An in vitro study revealed that the particles exhibited a low BCI value, low hemolysis ratio, and good cytocompatibility against L929 cells. The APGG particles could quickly stop bleeding in a mouse liver injury model and exhibited better hemostatic ability than the commercially available product Celox. Furthermore, the APGG particles could accelerate the healing of non-infected wounds, and the expression levels of CD31, α-SMA, and VEGF related to angiogenesis were significantly enhanced.

Enhancing the tumor penetration of multiarm polymers by collagenase modification.

Tumor penetration is a critical determinant of the therapy efficacy of nanomedicines. However, the dense extracellular matrix (ECM) in tumors significantly hampers the deep penetration of nanomedicines, resulting in large drug-untouchable areas and unsatisfactory therapy efficacy. Herein, we synthesized a third-generation PAMAM-cored multiarm copolymer and modified the polymer with collagenase to enhance its tumor penetration. Each arm of the copolymer was a diblock copolymer of poly(glutamic acid)-b-poly(carboxybetaine), in which the polyglutamic acid block with abundant side groups was used to link the anticancer agent doxorubicin through the pH-sensitive acylhydrazone linkage, and the zwitterionic poly(carboxybetaine) block provided desired water solubility and anti-biofouling capability. The collagenase was conjugated to the ends of the arms via the thiol-maleimide reaction. We demonstrated that the polymer-bound collagenase could effectively catalyze the degradation of the collagen in the tumor ECM, and consequently augmented the tumor penetration and antitumor efficacy of the drug-loaded polymers.

Poly(Glutamic Acid-Lysine) Hydrogels with Alternating Sequence Resist the Foreign Body Response in Rodents and Non-Human Primates.

The foreign body response (FBR) to implanted biomaterials and biomedical devices can severely impede their functionality and even lead to failure. The discovery of effective anti-FBR materials remains a formidable challenge. Inspire by the enrichment of glutamic acid (E) and lysine (K) residues on human protein surfaces, a class of zwitterionic polypeptide (ZIP) hydrogels with alternating E and K sequences to mitigate the FBR is prepared. When subcutaneously implanted, the ZIP hydrogels caused minimal inflammation after 2 weeks and no obvious collagen capsulation after 6 months in mice. Importantly, these hydrogels effectively resisted the FBR in non-human primate models for at least 2 months. In addition, the enzymatic degradability of the gel can be controlled by adjusting the crosslinking degree or the optical isomerism of amino acid monomers. The long-term FBR resistance and controlled degradability of ZIP hydrogels open up new possibilities for a broad range of biomedical applications.

Facile Synthesis of High Molecular Weight Poly(ethylene glycol)-b-poly(amino acid)s by Relay Polymerization.

Poly(amino acid)s (PAAs) are one kind of favorable biopolymer that can be used as a drug or gene carrier. However, conventional ring-opening polymerization of PAAs is slow and needs a strict anhydrous environment with an anhydrous reagent as well as the product without enough high molecular weight (Mn), which limits the expanding of PAAs' application. Herein, we took BLG-NCA as the monomer to quickly synthesize one kind of high Mn amphiphilic copolymer, poly(ethylene glycol)-b-poly(γ-benzyl-l-glutamic acid) (PEG-PBLG), by relay polymerization with a simple one-pot method within 3 h in mild conditions (open air, moisture insensitive). In the polymerization process, ring-opening polymerization-induced self-assembly in sodium bicarbonate aqueous solution first occurred to obtain low Mn PEG-PBLG seeds without purification. Then γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA) dichloromethane solution was added into PEG-PBLG seeds directly and stirred vigorously to form am emulsion; during this process, the amphiphilic PEG-PBLG seeds will anchor on the interface of DCM and water to ensure the concentration of α-helix rigid PBLG in DCM to maintain the following relay polymerization. Then, high Mn PEG-PBLG was obtained in mild conditions in one pot. We found that the α-helix rigid structure was essential for relay polymerization by studying the synthetic speed of amphiphilic copolymer with different secondary structures. MOE simulation results showed that PBLG and BLG-NCA tended to form a double hydrogen bond, which was beneficial to relay polymerization because of higher local concentrations that can produce more double hydrogen bonds. Our strategy can quickly obtain high Mn PEG-PBLG (224.9 KDa) within 3 h from PEG-NH2 and BLG-NCA in one pot and did not need an extra initiator. After deprotection, the poly(ethylene glycol)-b-poly(l-glutamate acid) (PEG-PGA) with high Mn as a second product can be used as an excellent antitumor drug carrier. The high Mn PEG-PGA can achieve an encapsulation rate of 86.7% and a drug loading rate of 47.3%, which is twice that of the low Mn PEG-PGA. As a result, the synthesis of PEG-PBLG by relay polymerization simplified the process of PEG-PAA polymerization and increased the Mn. In addition, this method opened a way to obtain other kinds of high Mn PEG-PBLG values in the future.

Peptide Epimerase Responsible for d-Amino Acid Introduction in Poly-γ-glutamic Acid Biosynthesis.

Poly-γ-glutamic acid (PGA) is a natural polymer of d- and/or l-glutamic acid (Glu) linked by isopeptide bonds. We recently showed that PGA synthetase, an enzyme complex composed of PgsB, PgsC, and PgsA, uses only l-Glu for polymerization, and d-Glu residues are introduced by peptide epimerization. However, it remains unclear which of the three enzymes is responsible for epimerization because in vitro functional characterization of the membrane-associated PgsBCA complex has never been successful. Here, we performed gene exchange experiments and showed that PgsA is responsible for the epimerization. Additionally, we identified a region in PgsA that modulates epimerization activity based on homology modeling from the recently solved structure of MslH, which showed 53% identity to PgsA. Our results suggested that d/l-ratios of the PGA product can be altered by introducing amino acid substitutions in this region, which will be useful for the production of PGA with controlled d/l-ratios.

Coupling fermentation of glutamic acid and γ-polyglutamic acid and preparation of poly(amino acid) superabsorbent polymers.

γ-polyglutamic acid (γ-PGA) is a biomarker that can be directly obtained by microbial fermentation. Poly(amino acid) superabsorbent polymers (SAPs) were prepared with purified γ-PGA as raw material and ethylene glycol diglycidyl ether (EGDGE) as a cross-linking agent. However, γ-PGA fermentation broth has a high viscosity, requires complex extraction and separation processes, and entails high energy consumption, resulting in the high cost of poly (amino acid) SAPs. Therefore, the coupling fermentation processes of glutamate polyglutamic acid, the process of using glutamate fermentation broth instead of pure glutamate powder for fermentation, and the process of treating the fermentation broth under conditions of centrifugation, UV irradiation, and high temperature, were studied. The results showed that the yield of γ-PGA after centrifugation decreased by 5%, but it did not affect the synthesis of hydrogels, and the addition of γ-PGA fermentation broth had a significant effect on the performance of γ-PGA-co-PASP SAPs. The proposed method not only helps avoid the separation of complex γ-PGA fermentation broth and reduces the cost, but it also helps improve the performance of the super-absorbent resin, which has great application potential.

Physicochemical Characterization of Chitosan/Poly-γ-Glutamic Acid Glass-like Materials.

This paper sets up a new route for producing non-covalently crosslinked bio-composites by blending poly-γ-glutamic acid (γ-PGA) of microbial origin and chitosan (CH) through poly-electrolyte complexation under specific experimental conditions. CH and two different molecular weight γ-PGA fractions have been blended at different mass ratios (1/9, 2/8 and 3/7) under acidic pH. The developed materials seemed to behave like moldable hydrogels with a soft rubbery consistency. However, after dehydration, they became exceedingly hard, glass-like materials completely insoluble in water and organic solvents. The native biopolymers and their blends underwent comprehensive structural, physicochemical, and thermal analyses. The study confirmed strong physical interactions between polysaccharide and polyamide chains, facilitated by electrostatic attraction and hydrogen bonding. The materials exhibited both crystalline and amorphous structures and demonstrated good thermal stability and degradability. Described as thermoplastic and saloplastic, these bio-composites offer vast opportunities in the realm of polyelectrolyte complexes (PECs). This unique combination of properties allowed the bio-composites to function as glass-like materials, making them highly versatile for potential applications in various fields. They hold potential for use in regenerative medicine, biomedical devices, food packaging, and 3D printing. Their environmentally friendly properties make them attractive candidates for sustainable material development in various industries.

The distinct initiation sites and processing activities of TTLL4 and TTLL7 in glutamylation of brain tubulin.

Mammalian brain tubulins undergo a reversible posttranslational modification-polyglutamylation-which attaches a secondary polyglutamate chain to the primary sequence of proteins. Loss of its erasers can disrupt polyglutamylation homeostasis and cause neurodegeneration. Tubulin tyrosine ligase like 4 (TTLL4) and TTLL7 were known to modify tubulins, both with preference for the ß-isoform, but differently contribute to neurodegeneration. However, differences in their biochemical properties and functions remain largely unknown. Here, using an antibody-based method, we characterized the properties of a purified recombinant TTLL4 and confirmed its sole role as an initiator, unlike TTLL7, which both initiates and elongates the side chains. Unexpectedly, TTLL4 produced stronger glutamylation immunosignals for α-isoform than ß-isoform in brain tubulins. Contrarily, the recombinant TTLL7 raised comparable glutamylation immunoreactivity for two isoforms. Given the site selectivity of the glutamylation antibody, we analyzed modification sites of two enzymes. Tandem mass spectrometry analysis revealed their incompatible site selectivity on synthetic peptides mimicking carboxyl termini of α1- and ß2-tubulins and a recombinant tubulin. Particularly, in the recombinant α1A-tubulin, a novel region was found glutamylated by TTLL4 and TTLL7, that again at distinct sites. These results pinpoint different site specificities between two enzymes. Moreover, TTLL7 exhibits less efficiency to elongate microtubules premodified by TTLL4, suggesting possible regulation of TTLL7 elongation activity by TTLL4-initiated sites. Finally, we showed that kinesin behaves differentially on microtubules modified by two enzymes. This study underpins the different reactivity, site selectivity, and function of TTLL4 and TTLL7 on brain tubulins and sheds light on their distinct role in vivo.

Ameliorative effect of calcium poly(aspartic acid) (PASP-Ca) and calcium poly-γ-glutamic acid (γ-PGA-Ca) on soil acidity in different horizons.

Soil acidification is a worldwide eco-environmental problem detrimental to plant growth and threatening food security. In this study, calcium poly(aspartic acid) (PASP-Ca) and calcium poly-γ-glutamic acid (γ-PGA-Ca) were obtained through cation exchange and used to mitigate soil acidity owing to high solubility and complexing capability. Three rates at 6.7, 13.4, and 20.1 g kg-1, denoted as PASP-Ca1, PASP-Ca2, and PASP-Ca3, and γ-PGA-Ca (7.4 g kg-1) were surface-applied and compared with conventional lime (CaCO3, 2.5 g kg-1) along with control in two soil layers (top soil 0-10 cm, subsoil 10-20 cm). After leaching, various soil properties and aluminum fractions were measured to assess their ameliorative performance and mechanisms. Although lime achieved the highest soil pH (6.91) in the topsoil followed by PASP-Ca and γ-PGA-Ca (pH: 5.57-6.33), it had less effect on subsoil increase (5.3) vs. PASP-Ca and γ-PGA-Ca (pH: 5.44-5.74). Surface-applied PASP-Ca demonstrated efficiency in elevating soil pH and reducing exchangeable acidity, mainly as exchangeable Al3+, whereas γ-PGA-Ca addition superiorly improved soil pH buffering capacity (pHBC). Moreover, PASP-Ca and γ-PGA-Ca addition improved organic carbon by 34.4-44.9%, available P by 4.80-20.71%, and cation exchange capacity (CEC) by 6.19-29.2%, thus greatly enhanced soil fertility. Ca2+ from polyAA-Ca promoted the displacement of exchangeable Al3+ or H+ from soil colloid, which were subsequently complexed or protonated and facilitated leaching. Additionally, the transformation into stable organo-aluminum fractions via complexation inhibited further hydrolysis. Under PASP-Ca or γ-PGA-Ca addition, the saturation of aluminum in cation exchange complex was reduced 2.91-7.81% compared to the control without addition amendments. Thus, PASP-Ca and γ-PGA-Ca can serve as potent ameliorants to alleviate soil acidity and aluminum toxicity for sustainable agricultural development.

Antimicrobial activity of gamma-poly (glutamic acid), a preservative coating for cherries.

We investigated the minimum inhibitory concentration (MIC), antibacterial activity, and preservation ability of four molar masses of γ-polyglutamic acid (PGA) against Escherichia coli, Bacillus subtilis, and yeast. The antibacterial mechanism was determined based on the cell structure, membrane permeability, and microscopic morphology of the microorganisms. We then measured the weight loss, decay rate, total acid, catalase activity, peroxidase activity, and malondialdehyde content toward the possible use of PGA as a preservative coating for cherries. When the molar mass was greater than 700 kDa, the MIC for Escherichia coli and Bacillus subtilis was less than 2.5 mg/mL. The mechanism of action of the four molar masses of PGA was different with respect to the three microbial species, but a higher molar mass of PGA corresponded to stronger inhibition against the microbes. PGA of 2000 kDa molar mass damaged the microbial cellular structure, resulting in excretion of alkaline phosphatase, but PGA of 1.5 kDa molar mass affected the membrane permeability and the amount of soluble sugar. Scanning electron microscopy indicated the inhibitory effect of PGA. The antibacterial mechanism of PGA was related to the molar mass of PGA and the microbial membrane structure. Compared with the control, a PGA coating effectively inhibit the spoilage rate, delay the ripening, and prolong the shelf life of cherries.

pH Responsive Poly(Amino Acid) Nanoparticles as Potent Carrier Adjuvants for Enhancing Cellular Immunity.

Adjuvants are widely used in vaccine to improve the protection or treatment efficacy. However, so far they inevitably produce side effects and are hard to induce cellular immunity in practical application. Herein, two kinds of amphiphilic poly(glutamic acid) nanoparticles (α-PGA-F and γ-PGA-F NPs) as nanocarrier adjuvants are fabricated to induce an effective cellular immune response. Amphiphilic PGA are synthesized by grafting phenylalanine ethyl ester to form biodegradable self-assembly nanoadjuvants in a water solution. The model antigen, chicken ovalbumin (OVA), can be loaded into PGA-F NPs (OVA@PGA-F NPs) with the high loading ratio >12%. Moreover, compared with γ-PGA-F NPs, the acidic environment can induce the α-helical secondary structure of α-PGA NPs, promoting membrane fusion and more fast antigen lysosomal escape. Hence, the antigen presenting cells treated with OVA@α-PGA-F NPs show higher secretion of inflammatory cytokines, and higher expression of major biological histocompatibility complex class I and CD80 than those of OVA@γ-PGA-F NPs. Overall, this work indicates that pH responsive α-PGA-F NPs as a carrier adjuvant can effectively improve the ability of cellular immune responses, leading to it being a potent candidate for vaccine applications.

ß-Alanine enhancing the crosslink of chitosan/poly-(γ-glutamic acid) hydrogel for a potential alkaline-adapted wound dressing.

Tiny crosslink in chitosan (CS)/poly-(γ-glutamic acid) (γ-PGA) hydrogel leads to some disadvantages including low mechanical strength and high swelling. To enhance the crosslink of CS/γ-PGA hydrogel, amino acid (AA) was introduced to remove the drawbacks. The results indicated that AA can dramatically increase the crosslink and mechanical properties of CS/γ-PGA hydrogel, and AA chain length and concentration have a drastic effect on them. Particularly, 0.5 % ß-Alanine (ß-Ala) decreased the hydrogel by 70 % in porosity, 52 % in water solubility, and 30 % in swelling, but increased by 2.2-fold in elastic modulus, 2.08-fold in stress, and 1.53-fold in water retention. The porosity of the hydrogel correlates positively with the elastic modulus but negatively with the crosslinking degree. The effect of pH on CS/ß-Ala/γ-PGA hydrogel was investigated in the load and release of benzalkonium chlorides (BAC). ß-Ala strengthened pH response of the hydrogel in BAC load and release. The loading capacity increased with pH value, and 0.5 % ß-Ala increased the hydrogel by 1.25-fold in the release capacity in alkaline environment, suggesting a good buffering effect of ß-Ala on pH variation to accelerate the transportation of BAC. CS/ß-Ala/γ-PGA hydrogel will be competently applied as a potential material for wound dressing in alkaline environment.