Enhancing Kinase Activity Detection with a Programmable Lanthanide Metal-Organic Framework via ATP-to-ADP Conversion.

Precise modulation of host-guest interactions between programmable Ln-MOFs (lanthanide metal-organic frameworks) and phosphate analytes holds immense promise for enabling novel functionalities in biosensing. However, the intricate relationship between these functionalities and structures remains largely elusive. Understanding this correlation is crucial for advancing the rational design of fluorescent biosensor technology. Presently, there exists a large research gap concerning the utilization of Ln-MOFsto monitor the conversion of ATP to ADP, which poses a limitation for kinase detection. In this work, we delve into the potential of Ln-MOFs to amplify the fluorescence response during the kinase-mediated ATP-to-ADP conversion. Six Eu-MOFs were synthesized and Eu-TPTC ([1,1':4',1″]-terphenyl-3,3'',5,5''-tetracarboxylic acid) was selected as a ratiometric fluorescent probe, which is most suitable for high-precision detection of creatine kinase activity through the differential response from ATP to ADP. The molecular -level mechanism was confirmed by density functional theory. Furthermore, a simple paper chip-based platform was constructed to realize the fast (20 min) and sensitive (limit of detection is 0.34 U/L) creatine kinase activity detection in biological samples. Ln-MOF-phosphate interactions offer promising avenues for kinase activity assays and hold the potential for precise customization of analytical chemistry.

A Comprehensive Analysis of ATP Tests: Practical Use and Recent Progress in the Total Adenylate Test for the Effective Monitoring of Hygiene.

ABSTRACT: Rapid hygiene monitoring tests based on the presence of ATP have been widely used in the food industry to ensure that adequate cleanliness is maintained. In this study, the practical applications and limitations of these tests and recent technological progress for facilitating more accurate control were evaluated. The presence of ATP on a surface indicates improper cleaning and the presence of contaminants, including organic debris and bacteria. Food residues are indicators of insufficient cleaning and are direct hazards because they may provide safe harbors for bacteria, provide sources of nutrients for bacterial growth, interfere with the antimicrobial activity of disinfectants, and support the formation of biofilms. Residues of allergenic foods on a surface may increase the risk of allergen cross-contact. However, ATP tests cannot detect bacteria or allergenic proteins directly. To ensure efficient use of commercially available ATP tests, in-depth knowledge is needed regarding their practical applications, methods for determining pass-fail limits, and differences in performance. Conventional ATP tests have limitations due to possible hydrolysis of ATP to ADP and AMP, which further hinders the identification of food residues. To overcome this problem, a total adenylate test was developed that could detect ATP+ADP+AMP (A3 test). The A3 test is suitable for the detection of adenylates from food residues and useful for verification of hygiene levels. The A3 test in conjunction with other methods, such as microorganism culture and food allergen tests, may be a useful strategy for identifying contamination sources and facilitating effective hygiene management.

Metabolite profiles and mass balance of fuzuloparib, a novel poly (ADP-ribose) polymerase inhibitor, in subjects with advanced solid cancers.

AIM: This trial (NCT04013048) investigated the metabolite profiles, mass balance and pharmacokinetics of fuzuloparib, a novel poly (ADP-ribose) polymerase inhibitor, in subjects with advanced solid cancers. METHODS: A single dose of 150 mg [14 C]fuzuloparib was administered to five subjects with advanced solid cancers. Blood, urine and faecal samples were collected, analysed for radioactivity and unchanged fuzuloparib, and profiled for metabolites. The safety of the medicine was assessed during the study. RESULTS: The maximum concentrations (Cmax ) of the total radioactivity (TRA) and unchanged fuzuloparib in plasma were 5.39 µg eq./mL and 4.19 µg/mL, respectively, at approximately 4 hours post dose. The exposure (AUC0-t ) of fuzuloparib accounted for 70.7% of the TRA in plasma, and no single metabolite was observed accounting for more than 10% of the plasma TRA. The recovery of TRA in excreta was 103.3 ± 3.8% in 288 hours, including 59.1 ± 9.9% in urine and 44.2 ± 10.8% in faeces. Sixteen metabolites of fuzuloparib were identified, including mono-oxidation (M1), hydrogenation (M2), di-oxidation (M3), trioxidation (M4), glucuronidation (M5, M7, M8) and de-ethylation (M6) products, and there was no specific binding between these metabolites and blood cells. Aliphatic hydroxylated fuzuloparib (M1-1) was the primary metabolite in the excreta, accounting for more than 40% of the dose for subjects. There were no serious adverse events observed in the study. CONCLUSION: Fuzuloparib was widely metabolized and excreted completely through urine and faeces in subjects with advanced solid cancer. Unchanged fuzuloparib was indicated to be the primary drug-related compound in circulation. [14 C]fuzuloparib was well-tolerated at the study dose.

Role of CD39 in COVID-19 Severity: Dysregulation of Purinergic Signaling and Thromboinflammation.

CD39/NTPDase1 has emerged as an important molecule that contributes to maintain inflammatory and coagulatory homeostasis. Various studies have hypothesized the possible role of CD39 in COVID-19 pathophysiology since no confirmatory data shed light in this regard. Therefore, we aimed to quantify CD39 expression on COVID-19 patients exploring its association with severity clinical parameters and ICU admission, while unraveling the role of purinergic signaling on thromboinflammation in COVID-19 patients. We selected a prospective cohort of patients hospitalized due to severe COVID-19 pneumonia (n=75), a historical cohort of Influenza A pneumonia patients (n=18) and sex/age-matched healthy controls (n=30). CD39 was overexpressed in COVID-19 patients' plasma and immune cell subsets and related to hypoxemia. Plasma soluble form of CD39 (sCD39) was related to length of hospital stay and independently associated with intensive care unit admission (adjusted odds ratio 1.04, 95%CI 1.0-1.08, p=0.038), with a net reclassification index of 0.229 (0.118-0.287; p=0.036). COVID-19 patients showed extracellular accumulation of adenosine nucleotides (ATP and ADP), resulting in systemic inflammation and pro-coagulant state, as a consequence of purinergic pathway dysregulation. Interestingly, we found that COVID-19 plasma caused platelet activation, which was successfully blocked by the P2Y12 receptor inhibitor, ticagrelor. Therefore, sCD39 is suggested as a promising biomarker for COVID-19 severity. As a conclusion, our study indicates that CD39 overexpression in COVID-19 patients could be indicating purinergic signaling dysregulation, which might be at the basis of COVID-19 thromboinflammation disorder.

Azulene-based fluorescent chemosensor for adenosine diphosphate.

AzuFluor® 435-DPA-Zn, an azulene fluorophore bearing two zinc(II)-dipicolylamine receptor motifs, exhibits fluorescence enhancement in the presence of adenosine diphosphate. Selectivity for ADP over ATP, AMP and PPi results from appropriate positioning of the receptor motifs, since an isomeric sensor cannot discriminate between ADP and ATP.

Assessing reversible and irreversible binding effects of kinase covalent inhibitors through ADP-Glo assays.

Typical enzymatic inhibition assays often demonstrate improved potency for kinase covalent inhibitors compared to reversible inhibitors. This can primarily be attributed to the irreversible mode of action and could affect the evaluations of the ATP-competitive nature of covalent inhibitors, hindering optimization of these compounds. Here, we describe a version of ADP-Glo assay, in which modification of inhibitor incubation time in the presence or absence of ATP enables a quick assessment of relative reversible and irreversible effects of kinase covalent inhibitors. For complete details on the use and execution of this protocol, please refer to Schröder et al. (2020).

Bioenergetic Heterogeneity in Mycobacterium tuberculosis Residing in Different Subcellular Niches.

ATP/ADP depicts the bioenergetic state of Mycobacterium tuberculosis (Mtb). However, the metabolic state of Mtb during infection remains poorly defined due to the absence of appropriate tools. Perceval HR (PHR) was recently developed to measure intracellular ATP/ADP levels, but it cannot be employed in mycobacterial cells due to mycobacterial autofluorescence. Here, we reengineered the ATP/ADP sensor Perceval HR into PHR-mCherry to analyze ATP/ADP in fast- and slow-growing mycobacteria. ATP/ADP reporter strains were generated through the expression of PHR-mCherry. Using the Mtb reporter strain, we analyzed the changes in ATP/ADP levels in response to antimycobacterial agents. As expected, bedaquiline induced a decrease in ATP/ADP. Interestingly, the transcriptional inhibitor rifampicin led to the depletion of ATP/ADP levels, while the cell wall synthesis inhibitor isoniazid did not affect the ATP/ADP levels in Mtb. The usage of this probe revealed that Mtb faces depletion of ATP/ADP levels upon phagocytosis. Furthermore, we observed that the activation of macrophages with interferon gamma and lipopolysaccharides leads to metabolic stress in intracellular Mtb. Examination of the bioenergetics of mycobacteria residing in subvacuolar compartments of macrophages revealed that the bacilli residing in phagolysosomes and autophagosomes have significantly less ATP/ADP than the bacilli residing in phagosomes. These observations indicate that phagosomes represent a niche for metabolically active Mtb, while autophagosomes and phagolysosomes harbor metabolically quiescent bacilli. Interestingly, even in activated macrophages, Mtb residing in phagosomes remains metabolically active. We further observed that macrophage activation affects the metabolic state of intracellular Mtb through the trafficking of Mtb from phagosomes to autophagosomes and phagolysosomes. IMPORTANCE ATP/ADP levels guide bacterial cells, whether to replicate or to enter nonreplicating persistence. However, tools for measuring ATP/ADP levels with spatiotemporal resolution are lacking. Here, we describe a method for tracking ATP/ADP levels at the single-cell and population levels. Using this tool, we have demonstrated that the transcription inhibitor rifampicin induces metabolic stress. In contrast, the cell wall synthesis inhibitor isoniazid does not alter the metabolic state of the bacilli, suggesting that transcription is tightly intertwined with metabolism, while cell wall synthesis is not. Furthermore, we analyzed the metabolic state of mycobacteria residing in different compartments of macrophages. We observed that Mtb cells residing inside phagosomes have healthy ATP/ADP levels. In contrast, the bacteria residing inside phagolysosomes and autophagosomes face depletion of ATP. Interestingly, the activation of macrophages facilitates the trafficking of mycobacterial cells from metabolism-conducive phagosomes to metabolism-averse phagolysosomes and autophagosomes. We believe that this tool holds the key to the identification of inhibitors of mycobacterial metabolism.

Assessing the Performance of a Real-Time Total Adenylate (ATP+ADP+AMP) Detection Assay for Surface Hygiene Monitoring in Food Manufacturing Plants and Commercial Kitchens.

ABSTRACT: Environmental hygiene monitoring in the food processing environment has become important in current food safety programs to ensure safe food production. However, conventional monitoring of surface hygiene based on visual inspection and microbial counts is slow, tedious, and thus unable to support the current risk-based management system. Therefore, this study was conducted to assess the performance of a real-time total adenylate assay that detected ATP+ADP+AMP (A3) for food contact surface hygiene in 13 food processing plants and two commercial kitchens in Malaysia. The A3 value was compared with the microbial count (aerobic plate count [APC]) on food contact surfaces. Receiver-operating characteristic (ROC) analysis was performed to assess the reliability of the data and to determine the optimal threshold value for hygiene indication of food contact surfaces. Overall, the A3 value demonstrated a weak positive relationship with APC. However, the A3 value significantly correlated with APC for food processing environments associated with raw meat and raw food ingredients such as fruit that harbor a high microbial load. ROC analysis suggested an optimal threshold for the A3 value of 500 relative light units to balance the sensitivity and specificity at 0.728 and 0.719, respectively. The A3 assay as a hygiene indicator for food contact surfaces had an efficiency of 72.1%, indicating its reliability as a general hygiene indicator.

Validation Study of LuciPacTM A3 Surface for Hygiene Monitoring through Detection of ATP, ADP, and AMP from Stainless Steel Surfaces: AOAC Performance Tested MethodSM 051901.

BACKGROUND: The LuciPac A3 Surface Hygiene Monitoring System based on the detection of total adenylate, ATP+ADP+AMP (A3), has been developed by Kikkoman Biochemifa. OBJECTIVE: This A3 swabbing assay kit was validated for Performance Tested MethodsSM (PTM) certification. METHODS: The LuciPac A3 Surface Hygiene Monitoring System was evaluated for limit of detection (LOD) for each adenylate with pure analyte solutions, detection of food residues and microbial residues on stainless steel surfaces, interference by disinfectants, and selectivity of the method response. RESULTS: Pure analyte studies performed by the method developer and the independent laboratory showed good linearity (R2 > 0.9854) and repeatability precision (RSDr < 20% for ≥2.5 fmol/assay). The LOD values for each adenylate were around 10 relative light units or 2.5 fmol/assay. The repeatability precision in the method developer laboratory for the matrix study (raw chicken breast, sliced deli ham, orange juice, yogurt, and apple pie) and the microbial study (Cronobacter sakazakii, Lactobacillus acidophilus, and Saccharomyces cerevisiae) were 8-30% and 10-35%, respectively. The repeatability precision of independent laboratory testing was 13-27% for orange juice and 16-43% for ham. Interference by several disinfectants indicate that rinsing is recommended to be performed after the use of sanitizing agents and before testing with LuciPac A3 Surface. Selectivity testing revealed that no positive interference and no inhibition were caused by adenylate analogues. Instrument variation, lot-to-lot consistency, accelerated stability (30°C, 5 weeks) were confirmed, and the method was shown to be robust against shaking time. CONCLUSIONS: The LuciPac A3 Surface has been successfully validated. HIGHLIGHTS: This A3 swabbing assay kit was qualified for PTM certification No. 051901.

Metabolomic and Imaging Mass Spectrometric Assays of Labile Brain Metabolites: Critical Importance of Brain Harvest Procedures.

Metabolomic technologies including imaging mass spectrometry (IMS; also called mass spectrometry imaging, MSI, or matrix-assisted laser desorption/ionization-mass spectrometry imaging, MALDI MSI) are important methods to evaluate levels of many compounds in brain with high spatial resolution, characterize metabolic phenotypes of brain disorders, and identify disease biomarkers. ATP is central to brain energetics, and reports of its heterogeneous distribution in brain and regional differences in ATP/ADP ratios reported in IMS studies conflict with earlier studies. These discordant data were, therefore, analyzed and compared with biochemical literature that used rigorous methods to preserve labile metabolites. Unequal, very low regional ATP levels and low ATP/ADP ratios are explained by rapid metabolism during postmortem ischemia. A critical aspect of any analysis of brain components is their stability during and after tissue harvest so measured concentrations closely approximate their physiological levels in vivo. Unfortunately, the requirement for inactivation of brain enzymes by freezing or heating is not widely recognized outside the neurochemistry discipline, and procedures that do not prevent postmortem autolysis, including decapitation, brain removal/dissection, and 'snap freezing' are commonly used. Strong emphasis is placed on use of supplementary approaches to calibrate metabolite abundance in units of concentration in IMS studies and comparison of IMS results with biochemical data obtained by different methods to help identify potential artifacts.

Determination of adenosine phosphates in mouse myocardium tissue by HPLC with UV detection and using porous graphite carbon column.

A high-performance liquid chromatography (HPLC) method with UV detection was established and validated for the simultaneous determination of adenosine triphosphate (ATP), adenosine diphosphate (ADP) and adenosine monophosphate (AMP) in mouse myocardial tissues. After protein precipitation and compound extraction with pre-cooled perchloric acid and the supernatant was centrifuged with the pH value adjusted to 6.5-7.5, the analytes were separated on a porous graphitic carbon LC column (4.6 mm × 100 mm, 5 µm) using gradient elution with a mobile phase of 10 mmol/L borax solution, pH 9.18(A) and acetonitrile-tetrahydrofuran (1:1, v/v) (B). The LC flow rate was 0.8 mL/min; the UV detection wavelength was 254 nm and the column temperature was maintained at 35 °C. ATP, ADP, and AMP were separated and the intra-day relative standard deviations (RSDs) of peak area repeatability were 1.3-2.5% (n = 6). The correlation coefficients of the linearity between UV responses and adenosine phosphate concentrations were larger than 0.9998 in all cases, within concentration ranges of 0.71-91.6 µg/mL for ATP, 1.3-81.5 µg/mL for ADP and 1.69-108.1 µg/mL for AMP. The limits of detection were within 0.17-0.21 µg/mL. The average standard substance spiked-in recoveries were 93.6-104.7% (n = 3). The established HPLC method was successfully applied to quantitate ATP, ADP, and AMP in mouse myocardial tissues.

Illuminating NAD+ Metabolism in Live Cells and In Vivo Using a Genetically Encoded Fluorescent Sensor.

Understanding of NAD+ metabolism provides many critical insights into health and diseases, yet highly sensitive and specific detection of NAD+ metabolism in live cells and in vivo remains difficult. Here, we present ratiometric, highly responsive genetically encoded fluorescent indicators, FiNad, for monitoring NAD+ dynamics in living cells and animals. FiNad sensors cover physiologically relevant NAD+ concentrations and sensitively respond to increases and decreases in NAD+. Utilizing FiNad, we performed a head-to-head comparison study of common NAD+ precursors in various organisms and mapped their biochemical roles in enhancing NAD+ levels. Moreover, we showed that increased NAD+ synthesis controls morphofunctional changes of activated macrophages, and directly imaged NAD+ declines during aging in situ. The broad utility of the FiNad sensors will expand our mechanistic understanding of numerous NAD+-associated physiological and pathological processes and facilitate screening for drug or gene candidates that affect uptake, efflux, and metabolism of this important cofactor.

Structural asymmetry does not indicate hemiphosphorylation in the bacterial histidine kinase CpxA.

Histidine protein kinases (HKs) are prevalent prokaryotic sensor kinases that are central to phosphotransfer in two-component signal transduction systems, regulating phosphorylation of response regulator proteins that determine the output responses. HKs typically exist as dimers and can potentially autophosphorylate at each conserved histidine residue in the individual protomers, leading to diphosphorylation. However, analyses of HK phosphorylation in biochemical assays in vitro suggest negative cooperativity, whereby phosphorylation in one protomer of the dimer inhibits phosphorylation in the second protomer, leading to ∼50% phosphorylation of the available sites in dimers. This negative cooperativity is often correlated with an asymmetric domain arrangement, a common structural characteristic of autophosphorylation states in many HK structures. In this study, we engineered covalent dimers of the cytoplasmic domains of Escherichia coli CpxA, enabling us to quantify individual species: unphosphorylated, monophosphorylated, and diphosphorylated dimers. Together with mathematical modeling, we unambiguously demonstrate no cooperativity in autophosphorylation of CpxA despite its asymmetric structures, indicating that these asymmetric domain arrangements are not linked to negative cooperativity and hemiphosphorylation. Furthermore, the modeling indicated that many parameters, most notably minor amounts of ADP generated during autophosphorylation reactions or present in ATP preparations, can produce ∼50% total phosphorylation that may be mistakenly attributed to negative cooperativity. This study also establishes that the engineered covalent heterodimer provides a robust experimental system for investigating cooperativity in HK autophosphorylation and offers a useful tool for testing how symmetric or asymmetric structural features influence HK functions.

Luciferase-assisted detection of extracellular ATP and ATP metabolites during immunogenic death of cancer cells.

The efficacy of cancer chemotherapy is enhanced by induction of sustainable anti-tumor immune responses. Such responses involve accumulation of immunogenic mediators, such as extracellular ATP and ATP metabolites, within the tumor microenvironment. Recent studies have identified nucleotide-permeable plasma membrane channels or pores that are activated as early downstream consequences of different regulated cell death pathways: pannexin-1 channels in apoptosis, MLKL pores in necroptosis, and gasdermin-family pores in pyroptosis. This chapter describes the use of highly quantitative and semi-high-throughput methods based on the ATP sensor luciferase to measure dynamic changes in extracellular ATP, ADP, and AMP in tissue/cell culture models of cancer cells during various modes of regulated cell death in response to chemotherapeutic drugs, death receptors, or metabolic perturbation.

Simultaneous High-Resolution Detection of Bioenergetic Molecules using Biomimetic-Receptor Nanopore.

A novel artificial receptor, heptakis-[6-deoxy-6-(2-hydroxy-3-trimethylammonion-propyl) amino]-beta-cyclomaltoheptaose, with similar functions of mitochondrial ADP/ATP carrier protein, was synthesized and harbored in the engineered α-HL (M113R)7 nanopore, forming a single-molecule biosensor for sensing bioenergetic molecules and their transformations. The strategy significantly elevates both selectivity and signal-to-noise, which enables simultaneous recognition and detection of ATP, ADP, and AMP by real-time single-molecule measurement.

Evaluation of the total adenylate (ATP + ADP + AMP) test for cleaning verification in healthcare settings.

INTRODUCTION: Evaluation of cleaning methods is the first step in the prevention of healthcare-associated infections. ATP hygiene monitoring tests are widely used for assessing the effectiveness of cleaning procedures. The test is easy to use and gives immediate results, however, ATP can be metabolized and degraded to ADP and AMP. Recently, a total adenylate [ATP + ADP + AMP(A3)] monitoring test has been developed. Our objective was to evaluate the usefulness of the A3 test for cleaning verification in healthcare settings. METHODS: The detection sensitivities of the ATP and the A3 tests were compared using blood, and debris derived from gloved-hand method and endoscopes immediately after endoscopic examination. The performance of the A3 test in monitoring cleanliness of high touch surfaces in the hospital and endoscopes at each cleaning step was also evaluated. RESULTS: For the hemolysate, the measurement values of the A3 test were stable, although ATP was promptly degraded. In debris from hands, the amount of A3 was 20 times higher than that of ATP. The detection sensitivities of the A3 test on residues derived from gastroscopes and colonoscopes were 3 and 8 times higher, respectively, than those from the ATP test. A field study indicated that a large number of microorganisms tend to show high A3 values on high touch surfaces in the hospital and on endoscopes. CONCLUSIONS: The A3 test showed higher detection sensitivities than the conventional ATP test for organic debris associated with healthcare settings.

Simultaneous detection of nicotinamide adenine nucleotides and adenylate pool to quantify redox and energy states in mAb-producing CHO cells by capillary electrophoresis.

Chinese hamster ovary (CHO) cells are predominant in the production of therapeutic proteins to treat various diseases. Characterization and investigation of CHO cell metabolism in a quick and simple way could boost process and cell line development. Therefore, a method to simultaneously detect seven redox- and energy-related metabolites in CHO cells by capillary electrophoresis has been developed. An on-line focusing technique was applied to improve the peak shape and resolution by using a 50 µm × 44 cm uncoated fused silica capillary. Key parameters and their interactions were investigated by design of experiments (DoE) and optimized conditions were determined by desirability function as follows: 24 °C, 95 mM, and pH 9.4 of BGE. The method was validated to ensure sensitivity, linearity, and reproducibility. The limits of detection (LODs) ranged from 0.050 to 0.688 mg/L for seven metabolites, and correlation coefficients of linearity were all greater than 0.996. The relative standard deviations (RSD) of migration time and peak area were smaller than 0.872% and 5.5%, respectively, except for NADPH, and the recoveries were between 97.5 and 101.2%. The method was successfully applied to analyze the extracts from CHO cells under two different culture conditions. Graphical abstract.

Spectrophotometric, fluorimetric and electrochemical selective pyrophosphate/ATP sensing based on the dimethyltin(IV)-tiron system.

Sensing of pyrophosphate anion (PPi) in the presence of nucleotide triphosphates allows the real time monitoring of the polymerase chain reaction. To get a deeper understanding of the factors involved in PPi/nucleotide triphosphate discrimination, a detailed study on the performance of a dimethyltin (IV)-catecholate complex capable of both separate fluorimetric or electrochemical detection of PPi in the presence of adenosine triphosphate (ATP) has been undertaken. Dimethyltin (IV) tightly binds PPi or ATP, and forms a stable 1:1 complex with tiron (4,5-dihydroxy-1,3-benzenedisulfonic acid) in water. The complexation equilibria with all components are characterized quantitatively by potentiometric and spectroscopic titrations. Pyrophosphate anion can be detected owing to its ability to release free tiron from the complex by measuring either a fluorimetric or an electrochemical signal. On the contrary, ATP does not displace tiron but causes an interference with PPi in the fluorimetric detection method due to the formation of a ternary Me2Sn(IV)-tiron-ATP complex with optical properties intermediate between those of free and bound tiron. In the electrochemical (square wave voltammetry) method, the ternary ATP complex shows a separate peak which does not coincide with the peaks of neither free nor bound tiron, thus making possible the simultaneous detection of ATP in addition to PPi.

Highly selective dual sensing of ATP and ADP using fluorescent ribonucleopeptide sensors.

Highly selective fluorescent sensors for ATP and ADP were constructed from RNA aptamers by applying a modular design of a ribonucleopeptide scaffold. These sensors allow facile and quantitative detection of ATP and ADP simultaneously in a solution and enable monitoring of the time-course changes of ATP and ADP concentrations in an enzymatic reaction.

Determination of ATP, ADP, and AMP Levels by Reversed-Phase High-Performance Liquid Chromatography in Cultured Cells.

Cytoplasmic and mitochondrial Ca2+ signals couple cellular ATP production to activity-related energy demand. In order to accurately determine the bioenergetic effect of Ca2+ signals, cellular energy charge, i.e., the compound ratio of the phosphorylated adenine nucleotides AMP, ADP, and ATP, should be estimated. Reversed-phase high-performance liquid chromatography (RP-HPLC) allows the rapid separation and quantitation of these molecules. Here we describe a protocol applied in our laboratories to quantify ATP, ADP, and AMP nucleotides in cellular extracts.