Effect of industrial alkene ozonolysis on atmospheric H2SO4 formation.

This study has employed the master chemical mechanism (MCM) to investigate the influence of the ozone oxidation pathways in the atmospheric formation of H2SO4 from short-chain olefins in industrialized areas. In-situ H2SO4 formation data were obtained using a high-resolution chemical ionization time-of-flight mass spectrometer, and the simulated H2SO4 concentrations calculated using updated parameters for the MCM model exhibited good agreement with observations. In the simulation analysis of different reaction pathways involved in H2SO4 formation, hydroxyl radicals were found to dominate H2SO4 production during the daytime, while olefin ozone oxidation contributed up to 65% of total H2SO4 production during the night-time. A sensitivity analysis of the H2SO4 production parameters has revealed a high sensitivity to changes in sulfur dioxide, and a relatively high sensitivity to olefins with fast ozonolysis reaction rates and bimolecular reaction rates of resulting stabilized Criegee Intermediates. A high relative humidity promotes daytime H2SO4 formation, but has an inhibiting effect during the night-time due to the different dominant reaction pathways.

Polymeric ionic liquids containing copper(I) and copper(II) ions as gas chromatographic stationary phases for olefin separations.

Copper(I) ions (Cu+) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu+ ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu+ ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu+ and Cu2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6MIM+][NTf2-]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf2-]) (poly([C6VIM+][NTf2-])) PIL containing monovalent and divalent copper salts (i.e., [Cu+][NTf2-] and [Cu2+]2[NTf2-]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu2+]2[NTf2-] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C6MIM+][NTf2-] IL and poly([C6VIM+][NTf2-]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu2+]2[NTf2-] salt compared to those with the [Cu+][NTf2-] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. To evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu2+]2[NTf2-]/[C6MIM+][NTf2-] IL stationary phase after its exposure to helium at a temperature of 110 °C.

Neuroprotective effects of salvianolic acids combined with Panax notoginseng saponins in cerebral ischemia/reperfusion rats concerning the neurovascular unit and trophic coupling.

BACKGROUND: The neurovascular unit (NVU) and neurovascular trophic coupling (NVTC) play a key regulatory role in brain injury caused by ischemic stroke. Salvianolic acids (SAL) and Panax notoginseng saponins (PNS) are widely used in China to manage ischemic stroke. Neuroprotective effects of SAL and PNS, either taken alone or in combination, were examined in this research. METHODS: Wistar rats were randomly divided into the following groups: Sham group (Sham), cerebral ischemia/reperfusion group (I/R), I/R with SAL group (SAL), I/R with PNS group (PNS), I/R with SAL combined with PNS (SAL + PNS), and I/R with edaravone group (EDA). Treatment was administered once daily for two days after modeling of middle cerebral artery occlusion/reperfusion (MCAO/R). RESULTS: Compared with the I/R group, SAL, PNS, or SAL + PNS treatment reduced infarct size, improved neurological deficit score, reduced Evans blue extravasation, increased expression of CD31 and tight junction proteins (TJs), including zonula occludens-1 (ZO-1), zonula occludens-2 (ZO-2), and junctional adhesion molecule-1 (JAM-1). Furthermore, SAL, PNS, or SAL + PNS suppressed the activations of microglia and astrocyte and led to the amelioration of neuron and pericyte injury. Treatment also inhibited NVU dissociation of GFAP/PDGFRß and Collagen IV/GFAP while upregulated the expression level of BDNF/TrkB and BDNF/NeuN. CONCLUSIONS: SAL and PNS have significantly remedied structural and functional disorders of NVU and NVTC in I/R injury. These effects were more pronounced when SAL and PNS were combined than when used separately.

Yarrowia lipolytica growth, lipids, and protease production in medium with higher alkanes and alkenes.

Two strains of Yarrowia lipolytica (CBS 2075 and DSM 8218) were first studied in bioreactor batch cultures, under different controlled dissolved oxygen concentrations (DOC), to assess their ability to assimilate aliphatic hydrocarbons (HC) as a carbon source in a mixture containing 2 g·L-1 of each alkane (dodecane and hexadecane), and 2 g·L-1 hexadecene. Both strains grew in the HC mixture without a lag phase, and for both strains, 30 % DOC was sufficient to reach the maximum values of biomass and lipids. To enhance lipid-rich biomass and enzyme production, a pulse fed-batch strategy was tested, for the first time, with the addition of one or three pulses of concentrated HC medium. The addition of three pulses of the HC mixture (total of 24 g·L-1 HC) did not hinder cell proliferation, and high protease (> 3000 U·L-1) and lipids concentrations of 3.4 g·L-1 and 4.3 g·L-1 were achieved in Y. lipolytica CBS 2075 and DSM 8218 cultures, respectively. Lipids from the CBS 2075 strain are rich in C16:0 and C18:1, resembling the composition of palm oil, considered suitable for the biodiesel industry. Lipids from the DSM 8218 strain were predominantly composed of C16:0 and C16:1, the latter being a valuable monounsaturated fatty acid used in the pharmaceutical industry. Y. lipolytica cells exhibited high intrinsic surface hydrophobicity (> 69 %), which increased in the presence of HC. A reduction in surface tension was observed in both Y. lipolytica cultures, suggesting the production of extracellular biosurfactants, even at low amounts. This study marks a significant advancement in the valorization of HC for producing high-value products by exploring the hydrophobic compounds metabolism of Y. lipolytica.

Metabolic engineering of Saccharomyces cerevisiae for enhanced taxadiene production.

BACKGROUND: Metabolic engineering enables the sustainable and cost-efficient production of complex chemicals. Efficient production of terpenes in Saccharomyces cerevisiae can be achieved by recruiting an intermediate of the mevalonate pathway. The present study aimed to evaluate the engineering strategies of S. cerevisiae for the production of taxadiene, a precursor of taxol, an antineoplastic drug. RESULT: SCIGS22a, a previously engineered strain with modifications in the mevalonate pathway (MVA), was used as a background strain. This strain was engineered to enable a high flux towards farnesyl diphosphate (FPP) and the availability of NADPH. The strain MVA was generated from SCIGS22a by overexpressing all mevalonate pathway genes. Combining the background strains with 16 different episomal plasmids, which included the combination of 4 genes: tHMGR (3-hydroxy-3-methylglutaryl-CoA reductase), ERG20 (farnesyl pyrophosphate synthase), GGPPS (geranyl diphosphate synthase) and TS (taxadiene synthase) resulted in the highest taxadiene production in S. cerevisiae of 528 mg/L. CONCLUSION: Our study highlights the critical role of pathway balance in metabolic engineering, mainly when dealing with toxic molecules like taxadiene. We achieved significant improvements in taxadiene production by employing a combinatorial approach and focusing on balancing the downstream and upstream pathways. These findings emphasize the importance of minor gene expression modification levels to achieve a well-balanced pathway, ultimately leading to enhanced taxadiene accumulation.

The subchronic toxicity of higher olefins in Han Wistar rats.

Higher olefins (HO) are a category of unsaturated hydrocarbons widely used in industry applications to make products essential for daily human life. Establishing safe exposure limits requires a solid data matrix that facilitates understanding of their toxicological profile. This in turn allows for data to be read across to other members of the category, which are structurally similar and have predictable physico-chemical properties. Five independent subchronic oral toxicity studies were conducted in Wistar rats with Oct-1-ene, Nonene, branched, Octadec-1-ene, Octadecene and hydrocarbon C12-30, olefin-rich, ethylene polymn. by product, at doses ranging from 20 to 1000 mg/kg bw. These HO were selected considering gut absorption, carbon chain length, double-bond position and carbon backbone structural variations. Generally, limited and non-adverse toxicity effects were observed at the end of the treatment for short carbon chain HO. For instance, alpha 2u-globulin nephropathy in the male rats and liver hypertrophy. No clear trend in systemic toxicity was linked to the double-bond position. Key factors for hazard assessment include absorption, carbon chain length, and branching, with Nonene, branched, identified as the worst-case substance. Taken together, the no observed adverse effect level (NOAEL) of each HO in these subchronic studies was set at the highest dose tested.

Tuning the morphology and textural properties of ZSM-5 additive for co-cracking of waste plastics with vacuum gas oil to light olefins.

Typical cracking catalysts, called equilibrium catalyst (E-Cat) are ultra-stable Y (USY) zeolite often used with 15% commercial ZSM-5 zeolite additive (ZSM-5(COM)) to boost olefin yield. In this study, similar additive zeolites with different pore sizes and acidic character were synthesized by rapid ageing of precursor solution and used in the co-cracking of low-density polyethylene (LDPE) and heavy vacuum gas oil (HVGO). Three ZSM-5 zeolites additives with Si/Al ratio 25 (ZSM-5(25)), 50 (ZSM-5(50)) and 75 (ZSM-5(75)) were synthesized and combined with E-Cat to form E-Cat/ZSM-5(25), E-Cat/ZSM-5(50) and E-Cat/ZSM-5(75) respectively. The E-Cat/ZSM-5(50) has slightly better endothermic conversion (cracking) of a mixture of dissolved LDPE and HVGO into H2, C1 to C4 gases and C2-C4 light olefins (total conversion of E-Cat 80.0%, E-Cat/ZSM-5(COM) 75.0% and E-Cat/ZSM-5(50) 83.7% respectively), with different gas, liquid and coke distributions. The E-Cat/ZSM-5(75) has 81% conversion, and highest yield of light olefins (38.4%). Structural (surface area, pore size) and chemical (acid sites) characteristics of the synthetized ZSM-5(75) zeolite explain the observed higher light olefin selectivity by different and competing catalytic routes. The ZSM-5(75) has demonstrated to be a good zeolite additive for converting dissolved plastic in HVGO into light olefins.

Practical preparation of unsaturated very-long-chain fatty acids (VLCFAs) and very-long-chain alkene pollinator attractants.

To prepare very-long-chain fatty acids and alkenes (VLCFAs and VLC alkenes) that are known pollinator attractants for sexually deceptive orchids, and biosynthetic precursors thereof, we applied a methodology allowing us to prepare monounsaturated VLCFAs with chain lengths up to 28 carbons and VLC alkenes up to 31 carbons. We implemented a coupling reaction between commercially available terminal alkynes and bromoalkanoic acids to prepare VLCFAs, allowing the products to be formed in two steps. For VLC alkenes, with many alkyltriphenylphosphonium bromides commercially available, we applied a Wittig reaction approach to prepare (Z)-configured monoenes in a single step. Using practical methods not requiring special reagents or equipment, we obtained 11 VLCFAs in > 90% isomeric purity, and 17 VLC alkenes in > 97% isomeric purity. Such general and accessible synthetic methods are essential for chemical ecology and biochemistry research to aid researchers in unambiguously identifying isolated semiochemicals and their precursors.

Systematic Engineering to Enhance ß-Myrcene Production in Yeast.

ß-Myrcene is an important monoterpene compound widely used in the fragrance, agricultural, and food industries. The microbial production of ß-myrcene conforms to the trend of green biological manufacturing, which has great potential for development. The poor catalytic activity of ß-myrcene synthase (MS) and the insufficient supply of precursors are considered to be the bottlenecks of ß-myrcene production. Here, source screening, subcellular localization, enzyme fusion, and precursor-enhancing strategies were integrated for ß-myrcene biosynthesis with Saccharomyces cerevisiae. The ß-myrcene titer gradually increased by 218-fold (up to 63.59 mg/L) compared to that of the initial titer of the shake flask. Moreover, the titer reached 66.82 mg/L after the addition of antioxidants (1 mM glutathione, GSH, and 1% butylated hydroxytoluene, BHT). Ultimately, 142.64 mg/L ß-myrcene in S. cerevisiae was achieved in 5.0 L of fed-batch fermentation under a carbon restriction strategy, which was the highest reported titer in yeast thus far. This study not only established a platform for ß-myrcene production but also provided a reference for the efficient biosynthesis of other monoterpene compounds.

Genome and metabolome analysis of Bacillus sp. Hex-HIT36: A newly screened functional microorganism for the degradation of 1-hexadecene in industrial wastewater.

1-Hexadecene has been detected at a level of mg/L in both influent and effluent of wastewater treatment plants situated in chemical/pharmaceutical industrial parks, which poses a potential threat to the environment. However, few reports are available on aerobic metabolic pathways and microorganisms involved in 1-Hexadecene degradation. In this study, a new strain of 1-Hexadecene-degrading bacteria, Bacillus sp. Hex-HIT36 (HIT36), was isolated from the activated sludge of a wastewater treatment plants located in an industrial park. The physicochemical properties and degradation efficacy of HIT36 were investigated. HIT36 was cultured on a medium containing 1-Hexadecene as a sole carbon source; it was found to remove ∼67% of total organic carbon as confirmed by mass spectrometric analysis of intermediate metabolites. Metabolomic and genomic analysis showed that HIT36 possesses various enzymes, namely, pyruvate dehydrogenase, dihydropolyhydroxyl dehydrogenase, and 2-oxoglutarate-2-oxoiron oxidoreductase (subunit alpha), which assist in the metabolization of readily available carbon source or long chain hydrocarbons present in the growth medium/vicinity. This suggests that HIT36 has efficient long-chain alkane degradation efficacy, and understanding the alkane degradation mechanism of this strain can help in developing technologies for the degradation of long-chain alkanes present in wastewater, thereby assisting in the bioremediation of environment.

Methionine-enabled peptide modification through late-stage Pd-catalyzed ß-C(sp3)-H olefination/cyclization.

We present a method for site-selective diversification of peptides via Pd-catalyzed ß-C(sp3)-H olefination/cyclization. In this protocol, the native methionine residue acts as a directing group, enabling site-specific olefination/cyclization of peptides. This chemistry demonstrates broad substrate scope, offering a versatile tool for peptide ligation.

Unlocking the function promiscuity of old yellow enzyme to catalyze asymmetric Morita-Baylis-Hillman reaction.

Exploring the promiscuity of native enzymes presents a promising strategy for expanding their synthetic applications, particularly for catalyzing challenging reactions in non-native contexts. In this study, we explore the promiscuous potential of old yellow enzymes (OYEs) to facilitate the Morita-Baylis-Hillman reaction (MBH reaction), leveraging substrate similarities between MBH reaction and reduction reaction. Using mass spectrometry and spectroscopic techniques, we confirm promiscuity of GkOYE in both MBH and reduction reactions. By blocking H- and H+ transfer pathways, we engineer GkOYE.8, which loses its reduction ability but enhances its MBH activity. The structural basis of MBH reaction catalyzed by GkOYE.8 is obtained through mutation studies and kinetic simulations. Furthermore, enantiocomplementary mutants GkOYE.11 and GkOYE.13 are obtained by directed evolution, exhibiting the ability to accept various aromatic aldehydes and alkenes as substrates. This study demonstrates the potential of leveraging substrate similarities to unlock enzyme functionalities, enabling the catalysis of new-to-nature reactions.

Asymmetric photoenzymatic incorporation of fluorinated motifs into olefins.

Enzymes capable of assimilating fluorinated feedstocks are scarce. This situation poses a challenge for the biosynthesis of fluorinated compounds used in pharmaceuticals, agrochemicals, and materials. We developed a photoenzymatic hydrofluoroalkylation that integrates fluorinated motifs into olefins. The photoinduced promiscuity of flavin-dependent ene-reductases enables the generation of carbon-centered radicals from iodinated fluoroalkanes, which are directed by the photoenzyme to engage enantioselectively with olefins. This approach facilitates stereocontrol through interaction between a singular fluorinated unit and the enzyme, securing high enantioselectivity at ß, γ, or δ positions of fluorinated groups through enzymatic hydrogen atom transfer-a process that is notably challenging with conventional chemocatalysis. This work advances enzymatic strategies for integrating fluorinated chemical feedstocks and opens avenues for asymmetric synthesis of fluorinated compounds.

Improved taxadiene production by optimizing DXS expression and fusing short-chain prenyltransferases.

This study highlights the significance of overexpressing 1-deoxy-d-xylulose-5-phosphate synthase (DXS) from the MEP (methylerythritol 4-phosphate) pathway, in addition to short-chain prenyltransferase fusions for the improved production of the diterpene, taxa-4,11-diene, the first committed intermediate in the production of anti-cancer drug paclitaxel. The results showed that the strain which has (i) the taxadiene synthase (txs) gene integrated into the genome, (ii) the MEP pathway genes overexpressed, (iii) the fpps-crtE prenyltransferases fusion protein and (iv) additional expression of 1-deoxy-d-xylulose-5-phosphate synthase (DXS), yielded the highest production of taxa-4,11-diene at 390 mg/L (26 mg/L/OD600). This represents a thirteen-fold increase compared to the highest reported concentration in B. subtilis. The focus on additional overexpression of DXS and utilizing short-chain prenyltransferase fusions underscores their pivotal role in achieving significant titer improvements in terpene biosynthesis.

Design, synthesis and evaluation of bioactivity of peptidomimetics based on chloroalkene dipeptide isosteres.

Ample biologically active peptides have been found, identified and modified for use in drug discovery to date. However, several factors, such as low metabolic stability due to proteolysis and non-specific interactions with multiple off-target molecules, might limit the therapeutic use of peptides. To enhance the stability and/or bioactivity of peptides, the development of "peptidomimetics," which mimick peptide molecules, is considered to be idealistic. Hence, chloroalkene dipeptide isosteres (CADIs) was designed, and their synthetic methods have been developed by us. Briefly, in a CADI an amide bond in peptides is replaced with a chloroalkene structure. CADIs might be superior mimetics of amide bonds because the Van der Waals radii (VDR) and the electronegativity value of a chlorine atom are close to those of the replaced oxygen atom. By a developed method of the "liner synthesis", N-tert-butylsulfonyl protected CADIs can be synthesized via a key reaction involving diastereoselective allylic alkylation using organocopper reagents. On the other hand, by a developed method of the "convergent synthesis", N-fluorenylmethoxycarbonyl (Fmoc)-protected carboxylic acids can be also constructed based on N- and C-terminal analogues from corresponding amino acid starting materials via an Evans syn aldol reaction and the Ichikawa allylcyanate rearrangement reaction involving a [3.3] sigmatropic rearrangement. Notably, CADIs can also be applied for Fmoc-based solid-phase peptide synthesis and therefore introduced into bioactive peptides including as the Arg-Gly-Asp (RGD) peptide and the amyloid ß fragment Lys-Leu-Val-Phe-Phe (KLVFF) peptide, which are correlated with cell attachment and Alzheimer's disease (AD), respectively. These CADI-containing peptidomimetics stabilized the conformation and enhanced the potency of the cyclic RGD peptide and the cyclic KLVFF peptide.

Phytochemical Analysis and Antioxidant and Antifungal Activities of Powders, Methanol Extracts, and Essential Oils from Rosmarinus officinalis L. and Thymus ciliatus Desf. Benth.

Chemical residues in food pose health risks such as cancer and liver issues. This has driven the search for safer natural alternatives to synthetic fungicides and preservatives. The aim of this study was to characterize the chemical composition of the essential oils (EO), determine the polyphenolic contents, and evaluate the in vitro antioxidant and antifungal activities of methanol extracts (ME), essential oils (EO), and powders from Rosmarinus officinalis L. (rosemary) and Thymus ciliatus (Desf) Benth. (thyme) from the M'sila region, Algeria. The chemical composition of the EOs was determined by GC-MS. R. officinalis EO was composed of 31 components, mainly camphor (41.22%), camphene (18.14%), and α-pinene (17.49%); T. ciliatus EO was composed of 58 components, mainly, in percentage, α-pinene (22.18), myrcene (13.13), ß-pinene (7.73), ß-caryophyllene (10.21), and germacrene D (9.90). The total phenols and flavonoids were determined spectrophotometrically, and the rosemary ME was found to possess the highest polyphenolic content (127.1 ± 2.40 µg GAE/mg), while the thyme ME had the highest flavonoid content (48.01 ± 0.99 µg QE/mg). The antioxidant activity was assessed using three methods: rosemary ME was the most potent, followed by DPPH (IC50 = 13.43 ± 0.14 µg/mL), ß-carotene/linoleic acid (IC50 = 39.01 ± 2.16 µg/mL), and reducing power (EC50 = 15.03 ± 1.43 µg/mL). Antifungal activity was assessed for 32 pathogenic and foodborne fungi. Four methods were applied to the solid medium. Incorporating the powdered plant into the culture medium (at 10%) reduced the fungal growth to greater than 50% in 21.88% and 6.25% of all fungal isolates, for R. officinalis and T. ciliatus, respectively. The ME, applied by the well diffusion method (0.1 g/mL), was less effective. Different concentrations of EO were tested. Incorporating the EO into the culture medium (1500 µL/L) inhibited 50% of the molds to levels of 50 and 75% for R. officinalis and T. ciliatus, respectively, with the complete inhibition of four fungi. Fumigated EO (15 µL) inhibited 65% of the molds to levels of 65 and 81.25% for R. officinalis and T. ciliatus, respectively, with the complete inhibition of five fungi. There was little to no sporulation in conjunction with the inhibition. Our results revealed some of the potential of the studied plants to fight foodborne molds and presented their promising characteristics as a source of alternatives to chemical pesticides and synthetic preservatives. Further studies are needed to find adequate application techniques in the food safety area.

The aroma profiles of dried gonggans: Characterization of volatile compounds in oven-dried and freeze-dried gonggan.

Dehydration is an effective method for the long-term storage and aroma retention of gonggan (Citrus sinensis Osb. 'Deqing Gonggan'), which is a Chinese variety of citrus, with unique and characteristic floral, fruity, and citrus flavors. However, the aroma profiles of gonggans prepared using oven- and freeze-drying, the most widely-used drying methods, remain unclear. In this study, a total of 911 volatile organic compounds (VOCs) were detected in dried gonggan. These were primarily composed of alcohols (7.69%), aldehydes (7.03%), esters (15.38%), ketones (7.58%), and terpenoids (23.19%). A total of 67 odorants contributed significantly to the overall aroma of dried gonggans, with the major odor qualities being detected as green, citrus, fruity, floral, and sweet. These were mainly attributed to the presence of aldehydes, esters, and terpenoids. Freeze-drying was more effective in maintaining the unique citrus and mandarin-like aromas attributed to compounds such as limonene, citrial, ß-myrcene, ß-pinene, and γ-terpinene. Moreover, (E,E)-2,4-decadienal had the highest relative odor activity value (rOAV) in freeze-dried gonggans, followed by (E)-2-nonenal, furaneol, (E, E)-2, 4-nonadienal, and E-2-undecenal. Oven-drying promoted the accumulation of terpenes such as octatriene, trans-ß-ocimene, cyclohexanone, copaene, and ɑ-irone, imparting a soft aroma of flowers, fruits, and sweet. Increasing the temperature led to an increase in existing VOCs or the generation of new VOCs through phenylpropanoid, terpenoid, and fatty acid metabolism. The findings of this study offer insights into an optimized procedure for producing high-quality dried gonggans. These insights can be valuable for the fruit-drying industry, particularly for enhancing the quality of dried fruits.

Diastereoselective 1,3-dipolar intramolecular nitrone olefin cycloaddition (INOC) reaction of a sugar-derived allyl alcohol: Synthesis of functionalized aminocyclopentitols.

The DIBAL-H reduction of the Baylis-Hillman sugar adduct, obtained from 3-O-benzyl-1,2-isopropylidene-α-D-xylo-pentodialdo-1,4-furanose yielded trisubstituted alkenes by eliminating the ß-hydroxyl group. Subsequently, the hydrolysis of the isopropylidene acetal to the corresponding hemiacetal was reacted with N-benzyl hydroxylamine hydrochloride to generate the nitrone, which underwent diastereoselective intramolecular 1,3-dipolar nitrone olefin cycloaddition (INOC) to give an isoxazolidine skeleton. The concomitant reductive cleavage of the N-O bond and benzyl group of the fused isoxazolidines afforded new functionalized aminocyclopentitols in good yields.

BioLindlar Catalyst: Ene-Reductase-Promoted Selective Bioreduction of Cyanoalkynes to Give (Z)-Cyanoalkenes.

The direct synthesis of alkenes from alkynes usually requires the use of transition-metal catalysts. Unfortunately, efficient biocatalytic alternatives for this transformation have yet to be discovered. Herein, the selective bioreduction of electron-deficient alkynes to alkenes catalysed by ene-reductases (EREDs) is described. Alkynes bearing ketone, aldehyde, ester, and nitrile moieties have been effectively reduced with excellent conversions and stereoselectivities, observing clear trends for the E/Z ratios depending on the nature of the electron-withdrawing group. In the case of cyanoalkynes, (Z)-alkenes were obtained as the major product, and the reaction scope was expanded to a wide variety of aromatic substrates (up to >99 % conversion, and Z/E stereoselectivities of up to >99/1). Other alkynes containing aldehyde, ketone, or ester functionalities also proved to be excellent substrates, and interestingly gave the corresponding (E)-alkenes. Preparative biotransformations were performed on a 0.4 mmol scale, producing the desired (Z)-cyanoalkenes with good to excellent isolated yields (63-97 %). This novel reactivity has been rationalised through molecular docking by predicting the binding poses of key molecules in the ERED-pu-0006 active site.

Oxidative Coupling of Hydroquinone Derivatives with Olefins to Dihydrobenzofurans.

Dihydrobenzofuran is an important skeleton for bioactive compounds and natural products. Hydroquinones can be easily modified into substituted hydroquinones, which effectively undergo oxidation to produce the corresponding benzoquinone derivatives. Benzoquinones are reactive electrophiles that are frequently utilized in coupling with olefins to dihydrobenzofurans. Herein, we report the one-pot oxidative coupling of hydroquinones bearing an electron-withdrawing group at the C2 position with olefins to dihydrobenzofurans in the presence of the Lewis acidic FeCl3 and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) oxidant. Furthermore, this method was applied to the oxidative coupling of N-electron-withdrawing group-substituted 4-aminophenol.