Biocatalyzed Synthesis of Flavor Esters and Polyesters: A Design of Experiments (DoE) Approach.

In the present work, different hydrolases were adsorbed onto polypropylene beads to investigate their activity both in short-esters and polyesters synthesis. The software MODDE® Pro 13 (Sartorius) was used to develop a full-factorial design of experiments (DoE) to analyse the thermostability and selectivity of the immobilized enzyme towards alcohols and acids with different chain lengths in short-esters synthesis reactions. The temperature optima of Candida antarctica lipase B (CaLB), Humicola insolens cutinase (HiC), and Thermobifida cellulosilytica cutinase 1 (Thc_Cut1) were 85 °C, 70 °C, and 50 °C. CaLB and HiC preferred long-chain alcohols and acids as substrate in contrast to Thc_Cut1, which was more active on short-chain monomers. Polymerization of different esters as building blocks was carried out to confirm the applicability of the obtained model on larger macromolecules. The selectivity of both CaLB and HiC was investigated and best results were obtained for dimethyl sebacate (DMSe), leading to polyesters with a Mw of 18 kDa and 6 kDa. For the polymerization of dimethyl adipate (DMA) with BDO and ODO, higher molecular masses were obtained when using CaLB onto polypropylene beads (CaLB_PP) as compared with CaLB immobilized on macroporous acrylic resin beads (i.e., Novozym 435). Namely, for BDO the Mn were 7500 and 4300 Da and for ODO 8100 and 5000 Da for CaLB_PP and for the commercial enzymes, respectively. Thc_Cut1 led to polymers with lower molecular masses, with Mn < 1 kDa. This enzyme showed a temperature optimum of 50 °C with 63% of DMA and BDO when compared to 54% and 27%, at 70 °C and at 85 °C, respectively.

Covalent immobilization of lipase from Candida rugosa on epoxy-activated cloisite 30B as a new heterofunctional carrier and its application in the synthesis of banana flavor and production of biodiesel.

In this paper, an epoxy-activated cloisite (ECL) was prepared as a new heterofunctional carrier via a reaction between cloisite 30B (CL) and epichlorohydrin and utilized for covalent immobilization of lipase from Candida rugosa. The lipase immobilized on the ECL (LECL) was successfully used in the olive oil hydrolysis, synthesis of isoamyl acetate (banana flavor), and biodiesel production. The TGA, FT-IR, SEM, and XRD were used to characterize CL, ECL, and LECL. The influences of temperature, pH, thermal stability, and storage capacity were examined in the olive oil hydrolysis. The effects of solvent, temperature, time, water content, and substrates molar ratio on the yields of ester and biodiesel were also investigated. In the optimized conditions, the hydrolytic activity of LECL was 1.85 ± 0.05 U/ mg, and the maximum yield of ester and biodiesel was 91.6% and 95.4%, respectively. The LECL showed good thermal stability and storage capacity compared to the free lipase. Additionally, LECL was reusable for both esterification and transesterification after being used for nine cycles.

Lipase@zeolitic imidazolate framework ZIF-90: A highly stable and recyclable biocatalyst for the synthesis of fruity banana flavour.

A zeolitic imidazolate framework (ZIF-90) has been synthesized through solvothermal method. The structure was characterized by means of FT-IR spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy (EDS). The synthesized ZIF-90 was applied as a support for immobilization of porcine pancreatic lipase (PPL). The immobilized enzyme (PPL@ZIF-90) exhibited immobilization yield and efficiency of 66 ± 1.8% and 89 ± 1.4%, respectively. The pH and thermal stability of PPL was improved after immobilization and the initial activity was retained at about 57% after 20 days of storage at 4 °C for PPL@ZIF-90. Moreover, about 57% of the original activity was remained following 10 cycles of application. In Michaelis-Menten kinetic studies, Km value for PPL@ZIF-90 was lower, while, the Vmax was higher than free PPL. Moreover, optimized conditions to produce fruity banana flavour upon esterification of butyric acid were investigated. The optimum esterification yield was 73.79 ± 1.31% in the presence of 245 mg PPL@ZIF-90, alcohol/acid ratio of 2.78 and 39 h reaction time. PPL@ZIF-90 showed 39% relative esterification yield after six cycles of reuse. The results suggested that PPL@ZIF-90 can be used as a potential effective biocatalyst for synthesis of isoamyl butyrate.

Generation of 4-vinylguaiacol through a novel high-affinity ferulic acid decarboxylase to obtain smoke flavours without carcinogenic contaminants.

Traditional smoke flavours bear the risk of containing a multitude of contaminating carcinogenic side-products. Enzymatic decarboxylation of ferulic acid released from agro-industrial side-streams by ferulic acid esterases (FAE) enables the sustainable generation of pure, food grade 4-vinylguaiacol (4-VG), the impact compound of smoke flavour. The first basidiomycetous ferulic acid decarboxylase (FAD) was isolated from Schizophyllum commune (ScoFAD) and heterologously produced by Komagataella phaffii. It showed a molecular mass of 21 kDa, catalytic optima at pH 5.5 and 35°C, and a sequence identity of 63.6% to its next relative, a FAD from the ascomycete Cordyceps farinosa. The ScoFAD exhibited a high affinity to its only known substrate ferulic acid (FA) of 0.16 mmol L-1 and a turnover number of 750 s-1. The resulting catalytic efficiency kcat KM-1 of 4,779 L s-1 mmol-1 exceeded the next best known enzyme by more than a factor of 50. Immobilised on AminoLink Plus Agarose, ScoFAD maintained its activity for several days. The combination with FAEs and agro-industrial side-streams paves the way for a new generation of sustainable, clean, and safe smoke flavours.

On the Formation of the Popcorn Flavorant 2,3-Butanedione (CH3 COCOCH3 ) in Acetaldehyde-Containing Interstellar Ices.

Acetaldehyde (CH3 CHO) is ubiquitous throughout the interstellar medium and has been observed in cold molecular clouds, star forming regions, and in meteorites such as Murchison. As the simplest methyl-bearing aldehyde, acetaldehyde constitutes a critical precursor to prebiotic molecules such as the sugar deoxyribose and amino acids via the Strecker synthesis. In this study, we reveal the first laboratory detection of 2,3-butanedione (diacetyl, CH3 COCOCH3 ) - a butter and popcorn flavorant - synthesized within acetaldehyde-based interstellar analog ices exposed to ionizing radiation at 5 K. Detailed isotopic substitution experiments combined with tunable vacuum ultraviolet (VUV) photoionization of the subliming molecules demonstrate that 2,3-butanedione is formed predominantly via the barrier-less radical-radical reaction of two acetyl radicals (CH3 CO). These processes are of fundamental importance for a detailed understanding of how complex organic molecules (COMs) are synthesized in deep space thus constraining the molecular structures and complexity of molecules forming in extraterrestrial ices containing acetaldehyde through a vigorous galactic cosmic ray driven non-equilibrium chemistry.

Formulation and Clinical Evaluation of Sodium Benzoate Oral Solution for the Treatment of Urea Cycle Disorders in Pediatric Patients.

BACKGROUND: Sodium benzoate, a common food preservative, is used in the treatment of patients with urea cycle disorders (UCDs) as it stimulates ammonia removal by a non-urea cycle-based pathway. Despite its use in the clinical routine, no commercially available oral formulations currently exist. Liquid formulation is normally well accepted in pediatric age and allows precise dosage according to the children's needs. AIMS: (1) To prepare an oral sodium benzoate solution in different tastes and determine its stability, palatability, and tolerability and (2) to describe the long-term follow-up of two pediatric patients with UCDs treated with our formulation. METHODS: We prepared five oral solutions of sodium benzoate (200 mg/ml) by adding different flavoring agents. We measured drug concentration in the samples by high-performance liquid chromatography (HPLC). We evaluated palatability and tolerability with adult volunteers. Long-term drug compliance and metabolic control were appraised in two pediatric patients. RESULTS: All the oral solutions remained stable at room temperature along the 96-day test period, and they were well tolerated. The mint-flavored solution resulted the most palatable and preferred by adult volunteers. We report good drug compliance and good metabolic outcomes for both pediatric patients during the entire follow-up. CONCLUSIONS: Our study highlighted the stability and tolerability of flavored sodium benzoate oral solutions. These solutions were well accepted during a long-term follow-up and guaranteed a good metabolic control. Since taste attributes are critical to ensure acceptable medication adherence in the pediatric age, flavored liquid formulations of sodium benzoate may be an efficient strategy to achieve therapeutic outcomes in UCD pediatric patients.

Gum Arabic-Mediated Synthesis of Glyco-pea Protein Hydrolysate via Maillard Reaction Improves Solubility, Flavor Profile, and Functionality of Plant Protein.

Pea protein hydrolysate (PPH) is successfully conjugated with gum arabic (GA) through Maillard-driven chemistry. The effect of cross-linking conjugation on the structure, solubility, volatile substances, emulsification, and antioxidative activity of glyco-PPH is investigated, and found to improve all properties. The formation of glyco-PPH is confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), Fourier-transform infrared (FTIR), and scanning electron microscopy (SEM). Size exclusion chromatography-multi angle light scattering (SEC-MALS) unveils that the maximum molecular mass of glyco-PPH occurs after 1 day of conjugation and approximately 1.2 mol of gum arabic conjugates on one mole of PPH. Headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) reveals the odor changes of glycoprotein before and after cross-linking. We have also prepared oil-in-water emulsions using glyco-PPH, which have enhanced physical stability against pH changes and chemical stability against lipid oxidation. The mechanism proposed involves Maillard-driven synthesis of the cross-linked PPH-GA conjugates, which increase the surface hydrophilicity and steric hindrance of glyco-PPH. These findings could provide a rational foundation for tailoring the physicochemical properties and functionalities of plant-based protein, which are attractive for food and functional materials applications.

Immobilization of lipase onto novel constructed polydopamine grafted multiwalled carbon nanotube impregnated with magnetic cobalt and its application in synthesis of fruit flavours.

Surface modification of multiwalled carbon nanotubes (MWCNTs) could enhance the features of the nanomaterial as carrier for enzyme immobilization. In this strategy, magnetic MWCNTs were fabricated by incorporating them with cobalt and functionalization was carried out by aminated polydopamine. The surface modified MWCNTs were then used as a carrier for the immobilization of Candida rugosa lipase (CRL) via covalent binding using glutaraldehyde. The immobilized CRL maintained high activity, which was 3-folds of free CRL. The immobilized CRL exhibited excellent thermal resistance as validated by TGA and DTA technique and was found to be active in a broad range of pH and temperatures in comparison to free CRL. Systematic characterization via FT-IR spectroscopy, CD spectroscopy, SEM, TEM and confocal laser scanning microscopy confirmed the presence of CRL on the modified MWCNTs. Immobilized CRL presented an exquisite recycling performance as after ten consecutive reuses it retained around 84% of its initial hydrolytic activity and further showed high yield enzymatic synthesis of ethyl butyrate and isoamyl acetate having characteristic pineapple and banana flavour demonstrating 78% and 75% ester yield, respectively. The present work provides a novel perspective for lipase catalyzed biotechnological applications by adding a magnetic gain to intrinsic features of MWCNTs.

Efficient biotechnological synthesis of flavor esters using a low-cost biocatalyst with immobilized Rhizomucor miehei lipase.

In this work, the synthesis of two fruit flavor esters, namely methyl and ethyl butyrate, by lipase from Rhizomucor miehei immobilized onto chitosan in the presence of the surfactant sodium dodecyl sulfate SDS was investigated. In the optimized conditions, maximum esterification yield for ethyl butyrate and methyl butyrate was (92 ± 1%) and (89 ± 1%), respectively. Esterification yields for both reactions were comparable or even superior to the ones achieved when the synthesis was catalyzed by a commercial enzyme, Lipozyme®, at the same reaction conditions. For ethyl butyrate, the developed biocatalyst was used for seven consecutive cycles of reaction with retention of its catalytic activity. For methyl butyrate synthesis the biocatalyst was used for four consecutive cycles without loss of its catalytic activity. The results show that chitosan may be employed in obtaining biocatalysts with high catalytic efficiency and can successfully replace the currently commercial available biocatalysts.

Structure-Odor Correlations in Homologous Series of Mercapto Furans and Mercapto Thiophenes Synthesized by Changing the Structural Motifs of the Key Coffee Odorant Furan-2-ylmethanethiol.

Furan-2-ylmethanethiol (2-furfurylthiol; 2-FFT, 1) is long-known as a key odorant in roast and ground coffee and was also previously identified in a wide range of thermally treated foods such as meat, bread, and roasted sesame seeds. Its unique coffee-like odor quality elicited at very low concentrations, and the fact that only a very few compounds showing a similar structure have previously been described in foods make 1 a suitable candidate for structure-odor activity studies. To gain insight into the structural features needed to evoke a coffee-like odor at low concentrations, 46 heterocyclic mercaptans and thio ethers were synthesized, 32 of them for the first time, and their odor qualities and odor thresholds were determined. A movement of the mercapto group to the 3-position kept the coffee-like aroma but led to an increase in odor threshold. A separation of the thiol group from the furan ring by an elongation of the carbon side chain caused a loss of the coffee-like odor and also led to an increase in odor thresholds, especially for ω-(furan-2-yl)alkane-1-thiols with six or seven carbon atoms in the side chain. A displacement of the furan ring by a thiophene ring had no significant influence on the odor properties of most of the compounds studied, but the newly synthesized longer-chain 1-(furan-2-yl)- and 1-(thiophene-2-yl)alkane-1-thiols elicited interesting passion fruit-like scents. In total, only 4 out of the 46 compounds also showed a coffee-like odor quality like 1, but none showed a lower odor threshold. Besides the odor attributes, also retention indices, mass spectra, and NMR data of the synthesized compounds were elaborated, which are helpful in possible future identification of these compounds in trace levels in foods or other materials.

Historical Review on the Identification of Mesifurane, 2,5-Dimethyl-4-methoxy-3(2 H)-furanone, and Its Occurrence in Berries and Fruits.

Mesifurane, 2,5-dimethyl-4-methoxy-3(2 H)-furanone, is a natural compound used a worldwide as a flavoring for foods, beverages, and cosmetics. Global sales of mesifurane are around $100 million. Its significance as a flavor-impact compound in some Nordic berries was discovered in the early 1970s in Finland. Synthesized mesifurane was used as a key compound in aroma mixes exploited in a Finnish patent. Mesifurane is a significant flavorant in arctic brambles, mangoes, strawberries, and many other fruits and berries and is an enzymatic methylation product of 2,5-dimethyl-4-hydroxy-3(2 H)-furanone. Because of the obscurity of the information on the history of the commonly used trivial name, mesifurane, it is time to lift the veil and reveal the background of the present situation. The key player was a northern berry, arctic bramble ( Rubus arcticus), the Finnish name of which is mesimarja. Forty years ago, aroma research was limited by technical factors, but nowadays there is a surplus of information.

Design, synthesis, and taste evaluation of a high-intensity umami-imparting oxazole-based compound.

Umami taste is imparted predominantly by monosodium glutamate (MSG) and 5'-ribonucleotides. Recently, several different classes of hydrophobic umami-imparting compounds, the structures of which are quite different from MSG, have been reported. To obtain a novel umami-imparting compound, N-cinnamoyl phenethylamine was chosen as the lead compound, and a rational structure-optimization study was conducted on the basis of the pharmacophore model of previously reported compounds. The extremely potent umami-imparting compound 2-[[[2-[(1E)-2-(1,3-benzodioxol-5-yl)ethenyl]-4-oxazolyle]methoxy]methyl]pyridine, which exhibits 27,000 times the umami taste of MSG, was found. Its terminal pyridine residue and linear structure are suggested to be responsible for its strong activity. The time taken to reach maximum taste intensity exhibited by it, as determined by the time-intensity method, is 22.0 s, whereas the maximum taste intensity of MSG occurs immediately. This distinct difference in the time-course taste profile may be due to the hydrophobicity and strong receptor affinity of the new compound.

Creation and imitation of a milk flavour.

Flavour plays a crucial role in food and is the most important aspect of milk. Milk has a pleasant smell and milk flavour can be used in several products. However, how to recreate milk flavour has rarely been reported. Therefore, the creation of milk flavour is of great interest. This study focused on the creation and imitation of milk flavour. The approach to flavour creation involves identifying the attributes of the flavour and developing an impactful, authentic flavour. Accordingly, to create a milk flavour, the notes of milk flavour were identified by smelling and tasting milk. Based on the identified notes, aroma ingredients were selected to blend into a milk-flavour. After olfactory discrimination, several modifications and adjustments were made and a typical milk flavour formula was obtained. The results showed that the milk flavour has the following notes: milky, acidic, vanilla-like, caramel-like, aldehydic, fruity, beany, buttery, meaty, and vegetative. Lactones, acids, aldehydes, alcohols, ketones, esters, sulphur compounds, furans, and nitrogen compounds can provide these notes. Based on the developed formula, a harmonious flavour with typical characteristics of milk was obtained by blending the selected aroma ingredients.

Chemical vs. biotechnological synthesis of C13-apocarotenoids: current methods, applications and perspectives.

Apocarotenoids are natural compounds derived from the oxidative cleavage of carotenoids. Particularly, C13-apocarotenoids are volatile compounds that contribute to the aromas of different flowers and fruits and are highly valued by the Flavor and Fragrance industry. So far, the chemical synthesis of these terpenoids has dominated the industry. Nonetheless, the increasing consumer demand for more natural and sustainable processes raises an interesting opportunity for bio-production alternatives. In this regard, enzymatic biocatalysis and metabolically engineered microorganisms emerge as attractive biotechnological options. The present review summarizes promising bioengineering approaches with regard to chemical production methods for the synthesis of two families of C13-apocarotenoids: ionones/dihydroionones and damascones/damascenone. We discuss each method and its applicability, with a thorough comparative analysis for ionones, focusing on the production process, regulatory aspects, and sustainability.

Rubemamine and Rubescenamine, Two Naturally Occurring N-Cinnamoyl Phenethylamines with Umami-Taste-Modulating Properties.

Sensory screening of a series of naturally occurring N-cinnamoyl derivatives of substituted phenethylamines revealed that rubemamine (9, from Chenopodium album) and rubescenamine (10, from Zanthoxylum rubsecens) elicit strong intrinsic umami taste in water at 50 and 10 ppm, respectively. Sensory tests in glutamate- and nucleotide-containing bases showed that the compounds influence the whole flavor profile of savory formulations. Both rubemamine (9) and rubescenamine (10) at 10-100 ppm dose-dependently positively modulated the umami taste of MSG (0.17-0.22%) up to threefold. Among the investigated amides, only rubemamine (9) and rubescenamine (10) are able to directly activate the TAS1R1-TAS1R3 umami taste receptor. Moreover, both compounds also synergistically modulated the activation of TAS1R1-TAS1R3 by MSG. Most remarkably, rubemamine (9) was able to further positively modulate the IMP-enhanced TAS1R1-TAS1R3 response to MSG ∼ 1.8-fold. Finally, armatamide (11), zanthosinamide (13), and dioxamine (14), which lack intrinsic umami taste in vivo and direct receptor response in vitro, also positively modulated receptor activation by MSG about twofold and the IMP-enhanced MSG-induced TAS1R1-TAS1R3 responses approximately by 50%. In sensory experiments, dioxamine (14) at 25 ppm in combination with 0.17% MSG exhibited a sensory equivalent to 0.37% MSG.

New Umami Amides: Structure-Taste Relationship Studies of Cinnamic Acid Derived Amides and the Natural Occurrence of an Intense Umami Amide in Zanthoxylum piperitum.

A series of aromatic amides were synthesized from various acids and amines selected from naturally occurring structural frameworks. These synthetic amides were evaluated for umami taste in comparison with monosodium glutamate. The effect of the substitution pattern of both the acid and the amine parts on umami taste was investigated. The only intensely umami-tasting amides were those made from 3,4-dimethoxycinnamic acid. The amine part was more tolerant to structural changes. Amides bearing an alkyl- or alkoxy-substituted phenylethylamine residue displayed a clean umami taste as 20 ppm solutions in water. Ultraperformance liquid chromatography coupled with a high quadrupole-Orbitrap mass spectrometer (UPLC/MS) was subsequently used to show the natural occurrence of these amides. (E)-3-(3,4-Dimethoxyphenyl)-N-(4-methoxyphenethyl)acrylamide was shown to occur in the roots and stems of Zanthoxylum piperitum, a plant of the family Rutaceae growing in Korea, Japan, and China.

Recent Advances in the Synthesis of Carotenoid-Derived Flavours and Fragrances.

Carotenoids are important isoprenoid compounds whose oxidative degradation produces a plethora of smaller derivatives, called apocarotenoids, which possess a range of different chemical structures and biological activities. Among these natural products, compounds having less than 15 carbon atoms in their frameworks are often relevant flavours or fragrances and their manufacturing represents an important economic resource for chemical companies. The strict correlation between stereochemical structure and odour has made the stereospecific synthesis of the latter biological active compounds increasingly important. In this review, the recent advances on the synthesis of the most relevant carotenoid-derived flavours and fragrances are discussed. In particular, the new synthetic methods that have given new and innovative perspectives from a scientific standpoint and the preparative approaches that might possess industrial importance are described thoroughly.

Evaluation of different methods for immobilization of Candida antarctica lipase B (CalB lipase) in polyurethane foam and its application in the production of geranyl propionate.

With the aim of studying the best method for the interaction of polyurethane (PU) foam and Candida antarctica lipase B, different methods of CalB immobilization were studied: adsorption (PU-ADS), bond (using polyethyleneimine) (PU-PEI), ionic adsorption by PEI with cross-linking with glutaraldehyde (PU-PEI-GA) and entrapment (PU). The characterization of immobilized enzyme derivatives was performed by apparent density and Fourier transform infrared spectroscopy. The free enzyme and enzyme preparations were evaluated at different pH values and temperatures. The highest enzyme activity was obtained using the PU method (5.52 U/g). The methods that stood out to compare the stabilities and kinetic parameters were the PU and PU-ADS. Conversions of 83.5 and 95.9 % for PU and PU-ADS derivatives were obtained, in 24 h reaction, using citronella oil and propionic acid as substrates.

Enantioselective syntheses and sensory properties of 2-methyl-tetrahydrofuran-3-thiol acetates.

The enantioselective synthesis of four stereoisomers of 2-methyl-tetrahydrofuran-3-thiol acetate was achieved. The two enantiomers of the important intermediate cis-2-methyl-3-hydroxy-tetrahydrofuran were obtained by Sharpless asymmetric dihydroxylation (AD), whereas the two enantiomers of trans-2-methyl-3-hydroxy-tetrahydrofuran were derived from the corresponding optically active cis-isomers by Mitsunobu reaction. Each stereoisomer of 2-methyl-3-hydroxy-tetrahydrofuran went through mesylation and nucleophilic substitution to afford the corresponding product with specific configuration. (2R,3S)- and (2R,3R)-2-methyl-tetrahydrofuran-3-thiol acetate were obtained in 80% ee, whereas the (2S,3R)- and (2S,3S)-isomers were in 62% ee. The odor properties of the synthesized four stereoisomers were evaluated by gas chromatography-olfactometry (GC-O), which revealed perceptible differences among stereoisomers both in odor features and in intensities.

New short and general synthesis of three key Maillard flavour compounds: 2-Acetyl-1-pyrroline, 6-acetyl-1,2,3,4-tetrahydropyridine and 5-acetyl-2,3-dihydro-4H-1,4-thiazine.

A new general synthetic route towards three key Maillard flavour compounds, namely 2-acetyl-1-pyrroline, 6-acetyl-1,2,3,4-tetrahydropyridine and 5-acetyl-2,3-dihydro-4H-1,4-thiazine, was developed. The key step in the process is the methylenation reaction of azaheterocyclic carboxylic esters by means of dimethyltitanocene, giving rise to intermediate vinyl ethers which can be considered as excellent and stable precursors for the title compounds, as a simple acidic treatment of these precursors suffices to release the characteristic Maillard flavours.