Patellar tilt, congruence angle, and tibial tubercle-trochlear groove distance are correlated with positive J-sign in adolescents.

PURPOSE: The J-sign is a clinical evaluation tool that assesses for patellar maltracking and is considered positive if lateral translation of the patella in extension, in the pattern of an inverted J is observed. This study aims to determine the association of clinical J-sign with imaging features noted on dynamic kinematic computed tomography (DKCT). METHODS: A retrospective review was conducted by reviewing the clinical records of all patients aged 18 years or younger who had a CT patellar tracking scan done between 1 January 2005 to 31 December 2016 in a single institution. Patients who had the presence or absence of a 'J-sign' evaluated clinically were included. Radiographic parameters evaluated using the axial cuts include the patellar tilt angle, congruence angle, Dejour's classification, femoral sulcus angle, trochlear groove depth, and Wiberg's classification. Patients were then divided into two groups based on the presence or absence of J-sign on clinical examination. The radiographic measurements were then analyzed for association with the presence or absence of J-sign on clinical examination. RESULTS: Patients with a positive J-sign had an increased patellar tilt of 23.3° ± 14.2° and an increased congruence angle of 47.1° ± 28.5° when measured in extension as compared to a patellar tilt of 18.3° ± 10.8° and a congruence angle of 32.1° ± 20.8° in patients with a negative J-sign (p = 0.024 and 0.004, respectively). Comparisons of the change in congruence angles with the knee in full extension and at 20° flexion also yielded significantly higher change of 28.0° ± 20.4° in patients with a positive J-sign as compared to 11.9° ± 17.5° in patients with a negative J-sign. Patients with a positive J-sign also had an increased TT-TG distance of 17.6 ± 5.6 mm as compared to a TT-TG distance of 14.7 ± 6.9 mm in patients with a negative J-sign (p = 0.01). CONCLUSION: Patients with a positive J-sign had an increased patellar tilt and an increased congruence angle when measured in extension. Increased TT-TG distance was also significantly associated with positive J-sign. Patients with a positive J-sign also had a greater change in their congruence angle when measured with the knee in full extension and at 20° of flexion.

Relationship between patellofemoral joint morphology and chondromalacia patella.

BACKGROUND: For the normal functioning of the patellofemoral joint (PF), the relationship between the patella and the trochlear groove must be compatible. PURPOSE: To investigate the relationship between patellofemoral joint morphology (PFM) and patellar chondromalacia. MATERIAL AND METHODS: Overall, 136 knees of patients aged 20-55 years examined between March 2020 and March 2021 were included in this study. In all patients, trochlear sulcus angle, trochlear sulcus depth, trochlear facet asymmetry, patella alta (Insall-Salvati [IS] index), and patellar facet asymmetry were measured. Of these cases, 66 knees with an abnormality detected in any of the measurements for PFM were included in the case group. Moreover, 70 knees with demonstrating normal PFM measurements were included in the control group. RESULTS: The incidence and grade of chondromalacia was higher in the case group than in the control group (P < 0.001). Between the patients with and without chondromalacia trochlear sulcus angle (mean = 138.25° ± 10.02° vs. 132.58° ± 7.24°; P = 0.001), IS index (mean = 1.25 ± 0.21 vs. 1.16 ± 0.15; P = 0.014), patellar facet asymmetry (mean = 0.77 ± 0.09 vs. 0.73 ± 0.12; P = 0.039), trochlear sulcus depth (mean = 5.39 ± 1.42 mm vs. 6.27 ± 1.04 mm; P < 0.001), and trochlear facet asymmetry (mean = 0.67 ± 0.11 vs. 0.71 ± 0.09; P = 0.023) measurements, there was a significant difference. CONCLUSION: The presence of at least one of the measures indicating pathology in PFM is associated with the presence and severity of chondromalacia.

Medial Patellofemoral Reconstruction Techniques for Patellar Instability.

The medial patellofemoral complex (MPFC) is the term used to describe the primary soft tissue stabilizer of the patella, which consists of fibers that attach to the patella (medial patellofemoral ligament, or MPFL), and the quadriceps tendon (medial quadriceps tendon femoral ligament, or MQTFL). Despite the variability of its attachment on the extensor mechanism, the midpoint of this complex is consistently at the junction of the medial quadriceps tendon with the articular surface of the patella, indicating that either patellar or quadriceps tendon fixation can be used for anatomic reconstruction. Multiple techniques exist to reconstruct the MPFC, including graft fixation on the patella, quadriceps tendon, or both structures. Various techniques using several graft types and fixation devices have all reported good outcomes. Regardless of the location of fixation on the extensor mechanism, elements critical to the success of the procedure include anatomic femoral tunnel placement, avoiding placing undue tension on the graft, and addressing concurrent morphological risk factors when present. This infographic reviews the anatomy and techniques for the reconstruction of the MPFC, including graft configuration, type, and fixation, while addressing common pearls and pitfalls in the surgical treatment of patellar instability.

Editorial Commentary: Patellofemoral Instability Results in Osteoarthritis, and Nonanatomic Surgery and Surgical Over-constraint May Also Cause Osteoarthritis.

When we are looking at the stars, we are in fact looking back in time. This is because it takes years for the light from the stars to reach us. In similar fashion, when we are evaluating data on osteoarthritis after patellofemoral surgery, we need to consider what kind of procedure was performed. Furthermore, it is extremely important to answer the question of whether the patellofemoral instability itself or the surgical procedure is causing the arthritis. Recent evidence suggests that recurrent patellofemoral instability is causing cartilage degeneration and stopping this process via surgical restoration of the anatomy and biomechanics of the patellofemoral joint may significantly reduce the risk of osteoarthritis. Shear loading of the cartilage can be detrimental. An instability event elicits inflammatory markers that are shown to induce arthritis. On the other hand, there is the argument that over-constraint may lead to arthritis owing to an increase in cartilage loading. Another argument is that surgery may not fully restore the patellofemoral anatomy. Appropriate patient selection and continuous evolution of our surgical procedures are key elements toward successful management of patellofemoral instability.

Patellar shift ratio (PSR) is the optimal measurement for characterising lateral patellar shift and a reliable predictor of recurrent patellar dislocation.

PURPOSE: To propose a new measurement, the patellar shift ratio (PSR), for characterising lateral patellar shift; to determine its diagnostic accuracy in predicting recurrent patellar dislocation (RPD); and to identify the effect of patellar tilt and morphology on shift measurements. METHODS: Variables including the PSR, bisect offset (BSO), BSO adjusted by trigonometric analysis, linear patellar displacement (LPD) distance and congruence angle were measured on axial computed tomography (CT). Furthermore, PSR was classified into grades determined by the threshold generated by receiver operating characteristic (ROC) curves. Youden's index was used to identify the ideal threshold on the curve. The area under the ROC curve (AUC) values and likelihood ratios were calculated to assess diagnostic performance in predicting RPD. Correlation analysis was conducted to identify the effects of lateral tilt and the Wiberg index on lateral shift. Intra- and interobserver reliability were evaluated using the intraclass correlation coefficient. RESULTS: The study included 54 RPD patients and 54 controls matched by sex and age. The threshold for PSR was 24.3% (sensitivity, 96.30%; specificity, 85.19%). AUCs were categorised as excellent for all protocols (P < 0.001). The positive likelihood ratio of the PSR for predicting RPD was 6.50. PSR was categorised in terms of lateral trochlear quadrants consisting of 25% increments. Lateral patellar tilt showed a strong positive correlation with BSO (P < 0.001); moderate correlations with PSR, LPD distance and adjusted BSO (P ≤ 0.001); and a weak correlation with congruence angle (P = 0.034). The Wiberg index presented a positive moderate correlation with BSO (P < 0.001), while no correlation was found with PSR, LPD distance, or congruence angle (n.s.). All parameters showed good repeatability (intraobserver) and reproducibility (interobserver). CONCLUSIONS: The PSR showed excellent diagnostic performance as indicated by likelihood ratios, measurement accuracy (being relatively resistant to the effects of tilt and the Wiberg index), and intra- and interobserver reliability. The optimal PSR threshold for predicting RPD risk was 24.3%, and the grade of PSR (normal, 1-4) was also a reliable and easily calculated predictor of RPD. This quantifying method to characterise lateral patellar shift is an alternative useful method for clinical assessments of RPD patients and for research on patellofemoral congruence. LEVEL OF EVIDENCE: Level III.

Sulcus depth, congruence angle, Wiberg index, TT-TG distance, and CDI are strong predictors of recurrent patellar dislocation.

PURPOSE: To characterize patellofemoral morphology, determine radiological cutoff values based on computed tomography (CT) images, and clarify predominant anatomic risk factors in young patients with recurrent patellar dislocation (RPD). METHODS: A total of 212 knees (age 23.0 ± 5.3 years, female: male = 110:102) with CT-confirmed RPD were enrolled for analysis. The control group was matched by age and sex (2:1). Patellofemoral and trochlear morphology, patellofemoral alignment, and other parameters were assessed by CT. Standardized methods were used for measurements. Receiver operating characteristic (ROC) curves and the areas under the ROC curve (AUCs) were used to assess accuracy in diagnosing RPD. The index of union (IU) was employed to identify a cutoff value for risk. A binary logistic regression model (Forward, LR) was constructed, and standardized coefficients were calculated to compare the relative strength of different predictors. Factors included in the model were employed to calculate distributions in the studied population. RESULTS: The majority of measurements showed a significant difference between the RPD and control groups when comparing mean values. The AUC value was favorable for sulcus depth and significantly better than that for other trochlear morphology parameters (P < 0.0001). Cutoff values were 0.58 for the Wiberg index, 153.3° for the sulcus angle, 3.6 mm for the sulcus depth, 1.94 for the trochlear width ratio, 16.2° for the lateral trochlear inclination, 17.2° for the patellar lateral tilt, 25.5° for the congruence angle, 1.2 for the patellar height [Caton-Deschamps index (CDI)], 6.1° for the knee rotation, and 16.4 mm for the tibial tubercle-trochlear groove (TT-TG) distance. A binary logistic regression model (χ2 = 20.826, P = 0.008) including the Wiberg index, sulcus depth, congruence angle, patellar height (CDI), and TT-TG distance was constructed for RPD (P ≤ 0.015), which showed excellent diagnostic performance, as indicated by an AUC of 0.989 (95% CI, 0.979 to 0.998). Sulcus depth showed the strongest relationship with RPD, followed by the congruence angle and Wiberg index, as indicated by the standardized coefficients - 1.43, 1.02, and 0.97, respectively. Eighty-seven percent of the RPD population had sulcus depth ≤ 3.6 mm. CONCLUSIONS: This study provides a systematic reference of cutoff values based on CT data. The combination of five anatomic risk factors (sulcus depth, congruence angle, Wiberg index, TT-TG distance, and CDI) may be an excellent predictor of RPD as initial risk assessment. Sulcus depth, as the most frequently observed anatomic risk factor, showed the best diagnostic performance among trochlear morphological parameters and the strongest relationship with RPD, followed by the congruence angle and Wiberg index. In clinical practice, the sulcus depth, congruence angle, Wiberg index, TT-TG distance, and CDI with the proposed cutoff values can be used in combination to evaluate RPD. When assessing trochlear morphology, sulcus depth is recommended as the best radiological parameter. LEVEL OF EVIDENCE: Level III.

Axial orientation of the femoral trochlea is superior to femoral anteversion for predicting patellar instability.

PURPOSE: The femoral anteversion angle is considered to be the same as femoral torsion; however, the femoral anteversion angle is strongly influenced by the femoral posterior condylar morphology. It remains unclear whether the femoral anteversion angle and axial orientation of the femoral trochlea can predict patellar instability. This study aimed to redefine the femoral inherent torsion, verify whether the femoral anteversion angle reflects the femoral inherent torsion, and compare the validity and calculate the cut-off values of the femoral anteversion angle and femoral trochlear axial orientation for predicting patellar instability. METHODS: Seventy-three patients with patellar instability and 73 matched controls underwent computed tomography to measure the femoral anteversion angle, femoral inherent torsion, and femoral trochlear axial orientation. Pearson's product moment correlation coefficients and linear regression were calculated to determine correlations between measurements. Receiver operating characteristic curves and nomograms were plotted to evaluate the predictive validity of the femoral anteversion angle and femoral trochlear axial orientation for patellar instability. RESULTS: All measurements showed excellent intra- and inter-observer reliability. Compared with the control group, the patellar instability group had a significantly larger femoral anteversion angle (25.4 ± 6.4° vs. 20.2 ± 4.5°) and femoral inherent torsion (18.3 ± 6.7° vs. 15.8 ± 3.4°), and significantly smaller femoral trochlear axial orientation (58.1 ± 7.3° vs. 66.9 ± 5.1°). The femoral anteversion angle and femoral trochlear axial orientation had area under the receiver operating characteristic curve values of 79 and 84%, respectively, and cut-off values of 24.5° and 62.7°, respectively. The calibration curve and decision curve analysis showed that the femoral trochlear axial orientation performed better than the femoral anteversion angle in predicting patellar instability. There was a strong correlation between the femoral anteversion angle and femoral inherent torsion (r > 0.8). Linear regression analysis of the femoral inherent torsion with the femoral anteversion angle as the prediction variate showed moderate goodness-of-fit (adjusted R2 = 0.69). CONCLUSION: The femoral anteversion angle moderately reflects the femoral inherent torsion. The femoral trochlear axial orientation is better than the femoral anteversion in predicting patellar instability in terms of predictive efficiency, consistency with reality, and net clinical benefit. These findings warn orthopaedists against overstating the role of the femoral anteversion angle in patellar instability, and suggest that the femoral trochlear axial orientation could aid in identifying at-risk patients and developing surgical strategies for patellar instability. LEVEL OF EVIDENCE: III.

Quantifying the Relationship Between the Medial Quadriceps Tendon-Femoral Ligament and Patellar Borders: A Pediatric Cadaveric Study.

BACKGROUND: The medial patellofemoral complex (MPFC) is a structure composed of the medial quadriceps tendon-femoral ligament (MQTFL) superiorly and the medial patellofemoral ligament (MPFL) inferiorly. The pediatric MPFL anatomy has been well described, but the precise anatomy of the MQTFL has only recently been described and studied in skeletally immature patients. PURPOSE: To describe the anatomic relationship between the MQTFL and its insertion on the quadriceps tendon and patella in pediatric specimens. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 22 pediatric cadaveric knee specimens were dissected to analyze attachment of the MQTFL to the quadriceps tendon and patella. Dissection was facilitated using lateral parapatellar arthrotomy followed by eversion of the extensor mechanism to evaluate MQTFL fibers from its undersurface. RESULTS: The mean specimen age was 7.4 years. Specimens were divided based on age into a younger cohort (1-2 years), middle cohort (4-8 years), and older cohort (9-12 years). The quadriceps tendon attachment (QTA) of the MQTFL proximal to the patella extended a median of 5.0 mm in the younger cohort, 11.4 mm in the middle cohort, and 12.0 mm in the older cohort, with significant differences found between the younger and middle cohorts (P < .047) and the younger and older cohorts (P < .001). The QTA as a percentage of patellar articular height averaged 44.4% across all specimens. The vertical height of the patella measured a median of 14.0 mm, 22.3 mm, and 27.3 mm in the younger, middle, and older cohorts, respectively. CONCLUSION: This study expands on the recently described anatomy of the pediatric MPFC to quantify the anatomic relationship between the MQTFL attachment to the quadriceps tendon and patella in a more clinically relevant cohort of donor specimens. CLINICAL RELEVANCE: As access to pediatric cadaveric tissue is extremely limited, a better understanding of MPFC and MQTFL anatomy will support surgeons in preoperative planning and intraoperative considerations for their approach to MQTFL and MPFL reconstruction. This may facilitate improved anatomic surgical stabilization of the patellofemoral joint in pediatric patients.

Concurrent validity and reliability of a semi-automated approach to measuring the magnetic resonance imaging morphology of the knee joint in active youth.

Post-traumatic knee osteoarthritis is attributed to alterations in joint morphology, alignment, and biomechanics triggered by injury. While magnetic resonance (MR) imaging-based measures of joint morphology and alignment are relevant to understanding osteoarthritis risk, time consuming manual data extraction and measurement limit the number of outcomes that can be considered and deter widespread use. This paper describes the development and evaluation of a semi-automated software for measuring tibiofemoral and patellofemoral joint architecture using MR images from youth with and without a previous sport-related knee injury. After prompting users to identify and select key anatomical landmarks, the software can calculate 37 (14 tibiofemoral, 23 patellofemoral) relevant geometric features (morphology and alignment) based on established methods. To assess validity and reliability, 11 common geometric features were calculated from the knee MR images (proton density and proton density fat saturation sequences; 1.5 T) of 76 individuals with a 3-10-year history of youth sport-related knee injury and 76 uninjured controls. Spearman's or Pearson's correlation coefficients (95% CI) and Bland-Altman plots were used to assess the concurrent validity of the semi-automated software (novice rater) versus expert manual measurements, while intra-class correlation coefficients (ICC2,1; 95%CI), standard error of measurement (95%CI), 95% minimal detectable change, and Bland-Altman plots were used to assess the inter-rater reliability of the semi-automated software (novice vs resident radiologist rater). Correlation coefficients ranged between 0.89 (0.84, 0.92; Lateral Trochlear Inclination) and 0.97 (0.96, 0.98; Patellar Tilt Angle). ICC estimates ranged between 0.79 (0.63, 0.88; Lateral Patellar Tilt Angle) and 0.98 (0.95, 0.99; Bisect Offset). Bland-Altman plots did not reveal systematic bias. These measurement properties estimates are equal, if not better than previously reported methods suggesting that this novel semi-automated software is an accurate, reliable, and efficient alternative method for measuring large numbers of geometric features of the tibiofemoral and patellofemoral joints from MR studies.

Using a 3D handheld scanner to capture trochlear groove shape: proof of concept study.

INTRODUCTION: Trochleoplasty is a surgical procedure used to treat patellar instability by modifying the trochlear groove. Analysis of the groove with a handheld scanner would enable accurate real-time planning and facilitate tailormade correction. We aimed to measure trochlear depth, sulcus angle, trochlear facet ratio, trochlear angle and lateral trochlear inclination angle and to establish inter- and intra-rater reliability for knee models to determine reliability and repeatability. METHODS: The trochlear grooves of three knee models were scanned by two investigators. Three-dimensional reference models were created and surface-matched. Custom software was used to determine the desired parameters. The intraclass correlation coefficient (ICC) was used to determine test-retest reliability and the parameter results for each model that showed best reproducibility. RESULTS: There was good interobserver reliability (trochlear depth, 1.0mm; sulcus angle, 2.7°; trochlear angle, 4.0°; lateral trochlear inclination angle, 4.0°), except in the trochlear facet ratio (32.0%) of one knee model. With outliers removed, the ICC was moderate to excellent in 73.34% of measurements, with trochlear depth showing the best reproducibility. DISCUSSION: This feasibility study showed a handheld scanner in conjunction with supporting software can measure trochlear parameters with good to excellent inter- and intra-observer reliability.

Sesamoid bones also show functional adaptation in their microanatomy-The example of the patella in Perissodactyla.

The patella is the largest sesamoid bone of the skeleton. It is strongly involved in the knee, improving output force and velocity of the knee extensors, and thus plays a major role in locomotion and limb stability. However, the relationships between its structure and functional constraints, that would enable a better understanding of limb bone functional adaptations, are poorly known. This contribution proposes a comparative analysis, both qualitative and quantitative, of the microanatomy of the whole patella in perissodactyls, which show a wide range of morphologies, masses, and locomotor abilities, in order to investigate how the microanatomy of the patella adapts to evolutionary constraints. The inner structure of the patella consists of a spongiosa surrounded by a compact cortex. Contrary to our expectations, there is no increase in compactness with bone size, and thus body size and weight, but only an increase in the tightness of the spongiosa. No particular thickening of the cortex associated with muscle insertions is noticed but a strong thickening is observed anteriorly at about mid-length, where the strong intermediate patellar ligament inserts. The trabeculae are mainly oriented perpendicularly to the posterior articular surface, which highlights that the main stress is anteroposteriorly directed, maintaining the patella against the femoral trochlea. Conversely, anteriorly, trabeculae are rather circumferentially oriented, following the insertion of the patellar ligament and, possibly also, of the quadriceps tendon. A strong variation is observed among perissodactyl families but also intraspecifically, which is in accordance with previous studies suggesting a higher variability in sesamoid bones. Clear trends are nevertheless observed between the three families. Equids have a much thinner cortex than ceratomorphs. Rhinos and equids, both characterized by a development of the medial border, show an increase in trabecular density laterally suggesting stronger stresses laterally. The inner structure in tapirs is more homogeneous despite the absence of medial development of the medial border with no "compensation" of the inner structure, which suggests different stresses on their knees associated with a different morphology of their patellofemoral joint.

An experimental simulation model to assess wear of the porcine patellofemoral joint.

A range of surgical techniques and osteochondral interventions have been developed for early stage chondral/osteochondral repair interventions in the knee however, methods for functional, pre-clinical assessment of these therapies are limited. In this study, a method for simulating physiological loading and motion in the porcine patellofemoral joint was developed using a 6-axis simulator. As an example of how the method can be used, the influence of surgical positioning of osteochondral allografts in the patella on cartilage wear, deformation and damage and graft stability was investigated in this porcine patellofemoral joint model. The functional performance of allografts implanted either optimally (flush with the cartilage surface) or 1 mm proud of the cartilage surface was compared to a positive control (stainless steel pin implanted 1 mm proud of the cartilage surface), a negative control (no intervention) and a defect model. Allografts implanted flush with the surrounding cartilage could restore the articulating surface of the patella resulting in low wear, damage and deformation of the opposing cartilage surface, similar to that of the negative control group. Implanting the graft proud of the patella surface resulted in cartilage lesions on the femoral trochlea (ICRS grade 2) and a cartilage volume difference of 2.0 ± 3.9 mm3; the positive controls resulted in more severe lesions, a higher volume difference (14.2 ± 7.4 mm3) which in some cases exposed subchondral bone (ICRS grade 4). Defects in the patella caused deformation of the opposing cartilage surface. All grafts implanted in the patella subsided over the duration of the study. This study demonstrated a method that can be used to evaluate osteochondral repair strategies in the patellofemoral joint applying physiological loading and motions.

Three-dimensional assessment of patellofemoral anatomy: Reliability and reference ranges.

BACKGROUND: Three-dimensional (3D) imaging and analysis offer new possibilities in preoperative diagnostics and surgical planning. Simultaneous 3D analysis of the joint angles and the patellofemoral anatomy allow for a realistic assessment of bony pathologies in patients with patellofemoral complaints. This study aims to develop a standardized and validated assessment of the 3D patellofemoral morphology and to establish reference ranges. METHODS: Thirteen patellofemoral anatomic landmarks were defined on 3D bone models of the lower limbs based on computer tomography data and evaluated regarding inter- and intra-observer variability. Further, 60 3D models of the lower limbs of young subjects without any previous knee operation/injury were assessed and rescaled reference values for relevant patellofemoral indices were obtained. RESULTS: The mean inter- and intra-observer deviation of all landmarks was below 2.3 mm. The interobserver intraclass correlation coefficient (ICC) was between 0.8 and 1.0 and the intra-observer ICC between 0.68 and 0.99 for all patellofemoral parameters. The calculated reference ranges are: Insall-Salvati index 1.0-1.4; patella tilt 6-18°; patella shift -4 to 3 mm; patella facet angle 118-131°; sulcus angle 141-156°; trochlear depth 3-6 mm; tibial-tuberosity to trochlear groove distance(TT-TG) 2D 14-21 mm; TT-TG 3D 11-18 mm; lateral trochlear inclination 13-23°; trochlear facet angle 43-65°. CONCLUSION: The demonstrated 3D analysis of the patellofemoral anatomy can be performed with high inter- and intra-observer correlation. Applying the obtained reference ranges and using existing 3D assessment tools for lower limb alignment, a preoperative 3D analysis and planning for complex knee procedures now is possible.

Relationship of the Medial Patellofemoral Ligament Origin on the Distal Femur to the Distal Femoral Physis: A Systematic Review.

BACKGROUND: The relationship between the medial patellofemoral ligament (MPFL) and the distal femoral physis has been reported in multiple studies. PURPOSE: To determine the distance from the MPFL central origin on the distal femur to the medial distal femoral physis in skeletally immature participants. STUDY DESIGN: Systematic review. METHODS: A systematic review was performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Multiple databases were searched for studies investigating the anatomic origin of the MPFL on the distal femur and its relationship to the medial distal femoral physis in skeletally immature participants. Study methodological quality was analyzed with the Anatomical Quality Assessment tool, with studies categorized as low risk, high risk, or unclear risk of bias. Continuous variable data were reported as mean ± SD. Categorical variable data were reported as frequency with percentage. RESULTS: Seven articles were analyzed (298 femurs, 53.7% male patients; mean age, 11.7 ± 3.4 years). There was low risk of bias based on the Anatomical Quality Assessment tool. The distance from the MPFL origin to the distal femoral physis ranged from 3.7 mm proximal to the physis to 10.0 mm distal to the physis in individual studies. Six of 7 studies reported that the MPFL origin on the distal femur lies distal to the medial distal femoral physis in the majority of specimens. The MPFL originated distal to the medial distal femoral physis in 92.8% of participants at a mean distance of 6.9 ± 2.4 mm. CONCLUSION: The medial patellofemoral ligament originates distal to the medial distal femoral physis in the majority of cases at a mean proximal-to-distal distance of 7 mm distal to the physis. However, this is variable in the literature owing to study design and patient age and sex.

Surgery for patellar dislocation has evolved towards anatomical reconstructions with assessment and treatment of anatomical risk factors.

PURPOSE: Increasing knowledge on the treatment of patellar dislocation has resulted in the development of new surgical techniques for patella stabilisation. National incidence and trends in surgery for patellar dislocation were examined using data from the Finnish National Hospital Discharge Register (NHDR). The hypothesis was that an increased understanding of the pathophysiology of patellar instability has increased the popularity of reconstructing damaged structures and modification of anatomical risk factors. METHODS: Data from the years 1997-2016 were collected from the NHDR database using ICD-10 diagnostic codes and the Nomesco Classification of Surgical Procedures (NCSP) codes. Surgical procedures were categorised into subgroups representing the main surgical approaches of patellar dislocation. Total incidence of surgery for patellar dislocation and change in incidence during the study period were calculated. RESULTS: A total of 9702 operations for patellar dislocation were performed during the study period. Median (IQR) patient age at time of primary surgery was 23 (18-34) years. The total incidence of surgeries remained stable across the study period at of 8.9 per 100,000 person-years. Incidences of ligament reconstruction, femoral osteotomies and osteochondral fragment reimplantation operations multiplied during the study period. Ligament reconstruction procedures were the most performed operations at the end of the study period. CONCLUSION: The incidence of surgical procedures for patellar dislocation remained unchanged during the years 1997-2016. Ligament reconstruction procedures increased in popularity. Surgical techniques have shifted towards the reconstruction of damaged structures and the modification of congenital anatomical risk factors for patellar dislocation. Diversified surgical techniques have enabled the tailoring and combining of stabilizing procedures according to the patient's individual anatomy.

Radiographic Reference Points Do Not Ensure Anatomic Femoral Fixation Sites in Medial Patellofemoral Ligament Reconstruction: A Quantified Anatomic Localization Method Based on the Saddle Sulcus.

BACKGROUND: Medial patellofemoral ligament (MPFL) reconstruction is one of the main treatments for lateral patellar translation. Based on intraoperative true lateral radiographs, the accepted methods for femoral MPFL tunnel location are potentially inaccurate. Direct assessment of anatomic characteristics during surgery through palpation of the anatomic landmarks involving the saddle sulcus might help eliminate tunnel malposition. HYPOTHESIS: The saddle sulcus is a reliable osseous landmark where the MPFL attaches for tunnel placement. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 9 fresh-frozen unpaired human cadaveric knees were dissected; MPFL insertion point and relative osseous structures were marked. Three-dimensional images and transformed true lateral radiographs were obtained for analysis; 3 previously reported radiographic reference points for MPFL femoral tunnel placement were determined on all images and compared with the anatomic insertion. RESULTS: A saddle sulcus consistently existed where the MPFL was attached, located at 11.7 ± 5.9 mm from the apex of the adductor tubercle (AT) to the medial epicondyle (ME), 62.8% of the average distance between the apexes of the AT and ME, and 5.6 ± 2.8 mm perpendicular-posterior to the border connecting the AT and ME. The reported radiographic reference points were located at average distances of 6.2 ± 3.2 mm (Schöttle method), 5.9 ± 2.3 mm (Redfern method), and 7.3 ± 6.6 mm (Fujino method) from the saddle sulcus center on the true lateral radiographs. CONCLUSION: The saddle sulcus was a reliable landmark where the MPFL was anatomically attached, located approximately 12 mm from the AT to the ME (approximately 60% along a line from the AT to the ME) and 6 mm perpendicular-posterior to the border connecting the apexes of the AT and ME. Additionally, the saddle sulcus position presented variability on the femoral aspect of different knees. All of the average direct distances from the sulcus to the reference radiographic points exceeded 5 mm, and tunnel localizations on a true lateral radiograph were inaccurate. CLINICAL RELEVANCE: This study demonstrates the potential precise position of the saddle sulcus, according to the ME and AT, as a reliable anatomic landmark for MPFL femoral tunnel location. Radiographic reference points were not accurate during MPFL reconstruction. Direct palpation of the landmarks might be effective for femoral MPFL tunnel placement.

Preoperative patellofemoral anatomy affects failure rate after isolated patellofemoral inlay arthroplasty.

PURPOSE: To analyze whether preoperative patellofemoral anatomy is associated with clinical improvement and failure rate after isolated patellofemoral arthroplasty (PFA) using a modern inlay-type trochlear implant. METHODS: Prospectively collected 24 months data of patients treated with isolated inlay PFA (HemiCAP® Wave, Arthrosurface, Franklin, MA, USA) between 2009 and 2016, and available digitalized preoperative imaging (plain radiographs in three planes and MRI) were retrospectively analyzed. All patients were evaluated using the WOMAC score, Lysholm score, and VAS pain. Patients revised to TKA or not achieving the minimal clinically important difference (MCID) for the total WOMAC score or VAS pain were considered failures. Preoperative imaging was analyzed regarding the following aspects: Tibiofemoral OA, patellofemoral OA, trochlear dysplasia (Dejour classification), patellar height (Insall-Salvati index [ISI]; Patellotrochlear index [PTI]), and position of the tibial tuberosity (TT-TG and TT-PCL distance). RESULTS: A total of 41 patients (61% female) with a mean age of 48 ± 13 years could be included. Fifteen patients (37%) were considered failures, with 5 patients (12%) revised to TKA and 10 patients (24%) not achieving MCID for WOMAC total or VAS pain. Failures had a significantly higher ISI, and a significantly lower PTI. Furthermore, the proportion of patients with a pathologic ISI (> 1.2), a pathologic PTI (< 0.28), and without trochlear dysplasia were significantly higher in failures. Significantly greater improvements in clinical outcome scores were observed in patients with a higher preoperative grade of patellofemoral OA, ISI ≤ 1.2, PTI ≥ 0.28, TT-PCL distance ≤ 21 mm, and a dysplastic trochlea. CONCLUSION: Preoperative patellofemoral anatomy is significantly associated with clinical improvement and failure rate after isolated inlay PFA. Less improvement and a higher failure rate must be expected in patients with patella alta (ISI > 1.2 and PTI < 0.28), absence of trochlear dysplasia, and a lateralized position of the tibial tuberosity (TT-PCL distance > 21 mm). Concomitant procedures such as tibial tuberosity transfer may, therefore, be considered in such patients. LEVEL OF EVIDENCE: Level III, retrospective analysis of prospectively collected data.

Femoral Origin Anatomy of the Medial Patellofemoral Complex: Implications for Reconstruction.

PURPOSE: To report the shape and orientation of the medial patellofemoral complex (MPFC) footprint on the medial femur and describe the difference between the proximal (medial quadriceps tendon femoral ligament, MQTFL) and distal (medial patellofemoral ligament, MPFL) fibers. METHODS: In 20 cadaveric knees, the MPFC footprint on the medial femur was exposed. Images of the medial femur were analyzed using ImageJ software. The length and width of the MPFC footprint were described to the nearest 0.1 mm; the angle of its long axis was described relative to the axis of the femoral shaft (0.1°). The footprint's most proximal and distal margins were described in relation to the adductor tubercle and medial epicondyle. The differences between each were compared using paired t tests. RESULTS: 17 knees from 10 cadavers were included in this study. The MPFC footprint had a length of 11.7 ± 1.8 mm and a width of 1.7 ± 0.4 mm. The long axis of the footprint was at an angle 14.6° ± 16.6° anterior to the axis of the femoral shaft. The most proximal (MQTFL) fibers originated 7.4 ± 3.8 mm anterior and 1.8 ± 4.7 mm distal to the adductor tubercle and 4.1 ± 2.9 mm posterior and 8.4 ± 5.6 mm proximal to the medial epicondyle. The most distal (MPFL) fibers originated 4.9 ± 4.2 mm anterior and 12.7 ± 4.3 mm distal to the adductor tubercle, as well as 7.1 ± 2.4 mm posterior and 0.5 ± 5.6 mm distal to the medial epicondyle. The distal margin of the femoral MPFC footprint was 10.9 ± 1.7 mm distal (p < .001) and 2.6 ± 3.2 mm more posterior (p = .005) than the proximal margin. CONCLUSIONS: The femoral footprint of the MPFC has a length almost 7 times greater than its width, with the distal margin being 10.9 mm distal and 2.6 mm posterior to the proximal margin. CLINICAL RELEVANCE: This differential anatomy within the femoral origin suggests that MPFL and MQTFL reconstruction may require separate positions of femoral fixation to recreate the anatomy of these fibers.

Patella-patellar tendon angle and lateral patella-tilt angle decrease patients with chondromalacia patella.

PURPOSE: The aim of the present study was to evaluate the effect of patellofemoral joint morphology and patellar alignment (lateral patellar tilt and sagittal patellar tilt) on the presence and stage of CP, and identify the differences between sexes. METHODS: MRI of 243 patients [146 men (60.1%)] were evaluated retrospectively. Patients were grouped as normal group without chondromalacia, group with mild chondromalacia (grades 1-2) and group with severe chondromalacia (grades 3-4). Sagittal patellofemoral alignment was assessed by the angle between the patella and patellar tendon (P-PTA), and the angle between the quadriceps tendon and patella (Q-PA). Patellar tilt was assessed by lateral patellar tilt angle (LPTA). In addition, patellofemoral joint morphology was evaluated by measuring trochlear depth (TD), trochlear sulcus angle (TSA) and patella angle (PA). RESULTS: P-PTA, Q-PA, LPTA and TD values were significantly lower in patients with severe chondromalacia than in patients with both normal and mild chondromalacia (P < 0.001). TSA values were significantly higher in patients with severe chondromalacia than those with both normal and mild chondromalacia (P < 0.001). TSA was higher and TD was lower in women compared to men (P < 0.001). LPTA and P-PTA were lower in women compared to men, and the difference was significant. There was no difference in PA between the two sexes. CONCLUSIONS: Patellar cartilage degeneration increases with trochlear dysplasia. There is a strong correlation between patellar malalignment (lateral patellar tilt and sagittal patellar tilt) and chondromalacia patella. Women are more prone to developing CP than men.

Medial Patellofemoral Ligament Isometry in the Setting of Patella Alta.

PURPOSE: To investigate alterations in technique for medial patellofemoral ligament (MPFL) reconstruction in the setting of patella alta and describe the effect of these alterations on MPFL anatomometry. METHODS: Ten cadaveric knees were used. Four candidate femoral attachment sites of MPFL were tested. The attachment sites were Schottle's point (SP), 5 mm distal to SP, 5 mm proximal to SP, and 10 mm proximal to SP. A suture anchor was placed at the upper 40% of the medial border of the patella with the emanating suture used to simulate the reconstructed ligament. MPFL maximum length change was calculated through a range of motion between 0° and 110°. Recordings at all 4 candidate femoral attachments sites were repeated after a flat tibial tubercle osteotomy and transfer to achieve alta as measured by the Caton-Deschamps Index (CDI) of 1.3, 1.4, and 1.5. RESULTS: The 10 specimens had an average CDI of 0.99, range 0.87 to 1.16. In the native tibial tubercle condition, SP was more isometric through 20° to 70° range of motion, or anatomometric, than any other candidate femoral attachment location. With patella alta with a CDI of 1.3 and 1.4, attachment site 5 mm proximal to SP exhibited more anatomometry than SP. With patella alta with a CDI of 1.5, attachment site 10 mm proximal to SP exhibited more anatomometry than SP. CONCLUSIONS: Increased patella alta significantly alters MPFL anatomometry. With increasing degrees of patella alta, more proximal candidate femoral attachment sites demonstrate decreased change in length compared with SP. None of the varied femoral attachments produced anatomometry over the entirety of the flexion range from 20° to 70°, suggesting that in cases of significant patella alta, proximalization the femoral attachment site of MPFL reconstruction may be necessary to achieve an anatomometric MPFL reconstruction. CLINICAL RELEVANCE: A standardized, isolated MPFL reconstruction may be prone to failure in the setting of patella alta, given the anisometry demonstrated. Alternative femoral attachment sites for MPFL reconstruction should be considered in these patients.