Dimensional determinants for the carcinogenic potency of elongate amphibole particles.

CONTEXT: Carcinogenic properties of particulates depend, among other factors, on dimensional characteristics that affect their ability to reach sensitive tissue, to be removed or retained, and to interact with the cells. OBJECTIVE: To model mesothelioma and lung cancer potency of amphibole particles based on their dimensional characteristics and mineral habit (asbestiform vs. nonasbestiform) utilizing epidemiological data and detailed size information. METHODS: The datasets from recently created depository of dimensional information of elongate mineral particles were used to correlate mesothelioma and lung cancer potency with the fraction of particles in a specific size range and the ratio of length and width in different powers. In addition, the cancer potency factors were estimated and compared for 30 asbestiform, 15 nonasbestiform, and 10 mixed datasets. RESULTS: For particles longer than 5 µm, the highest correlation with mesothelioma potency was achieved for width <0.22 µm, and with lung cancer <0.28 µm. The statistical power of the correlation was observed to lose significance at a maximum width of 0.6-0.7 µm. Mesothelioma potency correlated with length in the power of 1.9 divided by width in the power of 2.97, lung cancer potency with length in the power of 0.4 divided by width in the power of 1.17. The predicted cancer potencies of asbestiform, nonasbestiform, and mixed categories were significantly different. CONCLUSION: While additional studies in this direction are warranted, this paper should serve as an additional confirmation for the role of fiber dimensions in the carcinogenicity of amphibole elongate mineral particles (EMPs).

In-vitroassessment of ß-tricalcium phosphate/bredigite-ciprofloxacin (CPFX) scaffolds for bone treatment applications.

In the present study, ß-tricalcium phosphate (ß-TCP) scaffolds with various amounts of bredigite (Bre) were fabricated by the space holder method. The effect of bredigite content on the structure, mechanical properties,in vitrobioactivity, and cell viability was investigated. The structural assessment of the composite scaffolds presented interconnected pores with diameter of 300-500 µm with around 78%-82% porosity. The results indicated that the compressive strength of the scaffolds with 20% bredigite (1.91 MPa) was improved in comparison with scaffolds with 10% bredigite (0.52 MPa), due to the reduction of the average pore and grain sizes. Also, the results showed that the bioactivity and biodegradability of ß-TCP/20Bre were better than that of ß-TCP/10Bre. Besides, in this study, the release kinetics of ciprofloxacin (CPFX) loaded ß-TCP/Bre composites as well as the ability of scaffolds to function as a sustained release drug carrier was investigated. Drug release pattern of ß-TCP/bredigite-5CPFX scaffolds exhibited the rapid burst release of 43% for 3 h along with sustained release (82%) for 32 h which is favorable for bone infection treatment. Antibacterial tests revealed that the antibacterial properties of ß-TCP/bredigite scaffolds are strongly related to the CPFX concentration, wherein the scaffold containing 5% CPFX showed the most significant zone of inhibition (33 ± 0.5 mm) againstStaphylococcus aureus. The higher specific surface areas of nanostructure ß-TCP/bredigite scaffolds containing CPFX lead to an initial rapid release followed by constant drug delivery. MTT assay showed that the cell viability of ß-TCP/bredigite scaffold loading with up to 1%-3% CPFX (95 ± 2%), is greater than for scaffolds containing 5% CPFX (84 ± 2%). In Overall, it may suggested that ß-TCP/bredigite containing 1%-3% CPFX possesses great cell viability and antibacterial activity and be employed as bactericidal biomaterials and bone infection treatment.

Investigation of applying chitosan coating on antibacterial and biocompatibility properties of bredigite/titanium dioxide composite scaffolds.

In this study by considering the advantages of bredigite (Br) and titanium dioxide (TiO2) bioceramics, composite scaffolds of bredigite/titanium dioxide were prepared by the gelcasting method, then, to improve the mechanical, biological and antibacterial properties, scaffolds were coated with chitosan (Ch) polymer phase. The phase structure, fundamental groups, chemical composition, and elemental distribution analysis, morphology and the form of porosity were respectively characterized by XRD, FTIR, EDS, and SEM. Mechanical properties and porosity percentage of scaffolds were also measured by the compressive strength test and Archimedean method, respectively. In order to verify the cell compatibility, MG63 bone marrow cells were cultured on the surface of the specimens. The results showed that the addition of titanium dioxide to the scaffold of bredigite resulted in decrease of porosity and increase of compressive strength of scaffolds from 0.299 to 0.687 MPa. Furthermore, the coated scaffold with chitosan polymer reduced porosity from 83 to 63 percent and a remarkable improvement in compressive strength from 0.585 to 2.339 MPa. The results of the antibacterial test showed that in composite scaffolds, The diameter of the inhibition zone is 22 and 29 mm, in the culture media of Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive), respectively. On the other hand, the results of cell compatibility and cell adhesion tests showed that the scaffolds had no toxicity and the growth, proliferation, and adhesion of MG63 bone cells adjacent to the scaffolds was desirable. Therefore, the scaffold in this study can be used as an ideal scaffold for use in bone tissue engineering.

A computational study of the interactions between anthocyans and cyclodextrins.

The interactions between six anthocyans (cyanidin-3-O-glucoside, delphinidin-3-O-glucoside, malvidin-3-O-glucoside, cyanidin-3-O-rutinoside, delphinidin-3-O-rutinoside, malvidin-3-O-rutinoside) and cyclodextrins were investigated by means of computational techniques. Four different structures of the aforementioned anthocyans were considered, as a result of the dependence structure - pH value (flavylium cations in acidic medium, hemiketals in neutral solutions and two tautomeric quinones in alkaline environment). The results outlined that the anthocyanidin-3-O-rutinoside are favored for the obtaining of inclusion complexes with the cyclodextrins, mostly due to the larger number of OH groups involved in the formation of hydrogen bonds. For all the four types of structures, best results have been obtained for ß- and γ-cyclodextrins.

Poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/fibrinogen/bredigite nanofibrous membranes and their integration with osteoblasts for guided bone regeneration.

Guided bone regeneration (GBR) has been established to be an effective method for the repair of defective tissues, which is based on isolating bone defects with a barrier membrane for faster tissue reconstruction. The aim of the present study is to develop poly (hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/fibrinogen (FG)/bredigite (BR) membranes with applicability in GBR. BR nanoparticles were synthesized through a sol-gel method and characterized using transmission electron microscopy and X-ray diffractometer. PHBV, PHBV/FG, and PHBV/FG/BR membranes were fabricated using electrospinning and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, contact angle, pore size, thermogravimetric analysis and tensile strength. The electrospun PHBV, PHBV/FG, and PHBV/FG/BR nanofibers were successfully obtained with the mean diameter ranging 240-410 nm. The results showed that Young's modulus and ultimate strength of the PHBV membrane reduced upon blending with FG and increased by further incorporation of BR nanoparticles, Moreover hydrophilicity of the PHBV membrane improved on addition of FG and BR. The in vitro degradation assay demonstrated that incorporation of FG and BR into PHBV matrix increased its hydrolytic degradation. Cell-membrane interactions were studied by culturing human fetal osteoblast cells on the fabricated membrane. According to the obtained results, osteoblasts seeded on PHBV/FG/BR displayed higher cell adhesion and proliferation compared to PHBV and PHBV/FG membrane. Furthermore, alkaline phosphatase activity and alizarin red-s staining indicated enhanced osteogenic differentiation and mineralization of cells on PHBV/FG/BR membranes. The results demonstrated that developed electrospun PHBV/FG/BR nanofibrous mats have desired potential as a barrier membrane for guided bone tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1154-1165, 2019.

GPTMS-Modified Bredigite/PHBV Nanofibrous Bone Scaffolds with Enhanced Mechanical and Biological Properties.

Bioceramic nanoparticles with high specific surface area often tend to agglomerate in the polymer matrix, which results in undesirable mechanical properties of the composites and poor cell spreading and attachment. In the present work, bredigite (BR) nanoparticles were modified with an organosilane coupling agent, 3-glycidoxypropyltrimethoxysilane (GPTMS), to enhance its dispersibility in the polymer matrix. The polyhydroxybutyrate-co-hydroxyvaletare (PHBV) nanofibrous scaffolds containing either bredigite or GPTMS-modified bredigite (G-BR) nanoparticles were fabricated using electrospinning technique and characterized using scanning electron microscopy, transmission electron microscopy, and tensile strength. Results demonstrated that modification of bredigite was effective in enhancing nanoparticle dispersion in the PHBV matrix. PHBV/G-BR scaffold showed improved mechanical properties compared to PHBV and PHBV/BR, especially at the higher concentration of nanoparticles. In vitro bioactivity assay performed in the simulated body fluid (SBF) indicated that composite PHBV scaffolds were able to induce the formation of apatite deposits after incubation in SBF. From the results of in vitro biological assay, it is concluded that the synergetic effect of BR and GPTMS provided an enhanced hFob cells attachment and proliferation. The developed PHBV/G-BR nanofibrous scaffolds may be considered for application in bone tissue engineering.

Mechanical and cytotoxicity evaluation of nanostructured hydroxyapatite-bredigite scaffolds for bone regeneration.

Despite the attractive characteristics of three-dimensional pure hydroxyapatite (HA) scaffolds, due to their weak mechanical properties, researches have focused on the development of composite scaffolds via introducing suitable secondary components. The aim of this study was to develop, for the first time, three-dimensional HA-bredigite (Ca7MgSi4O16) scaffolds containing various amounts of bredigite nanopowder (0, 5, 10 and 15wt.%) using space holder technique. Transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectroscopy were applied in order to study the morphology, fracture surface and phase compositions of nanopowders and scaffolds. Furthermore, the effects of scaffold composition on the mechanical properties, bioactivity, biodegradability, and cytotoxicity were also evaluated. Results showed that the composite scaffolds with average pore size in the range of 220-310µm, appearance porosity of 63.1-75.9% and appearance density of 1.1±0.04g/cm(3) were successfully developed, depending on bredigite content. Indeed, the micropore size of the scaffolds reduced with increasing bredigite content confirming that the sinterability of the scaffolds was improved. Furthermore, the compression strength and modulus of the scaffolds significantly enhanced via incorporation of bredigite content from 0 to 15wt.%. The composite scaffolds revealed superior bioactivity and biodegradability with increasing bredigite content. Moreover, MTT assay confirmed that HA-15wt.% bredigite scaffold significantly promoted cell proliferation compared to tissue culture plate (control) and HA scaffold. Based on these results, three-dimensional HA-bredigite scaffolds could be promising replacements for HA scaffolds in bone regeneration.

Trace elements in hazardous mineral fibres.

Both occupational and environmental exposure to asbestos-mineral fibres can be associated with lung diseases. The pathogenic effects are related to the dimension, biopersistence and chemical composition of the fibres. In addition to the major mineral elements, mineral fibres contain trace elements and their content may play a role in fibre toxicity. To shed light on the role of trace elements in asbestos carcinogenesis, knowledge on their concentration in asbestos-mineral fibres is mandatory. It is possible that trace elements play a synergetic factor in the pathogenesis of diseases caused by the inhalation of mineral fibres. In this paper, the concentration levels of trace elements from three chrysotile samples, four amphibole asbestos samples (UICC amosite, UICC anthophyllite, UICC crocidolite and tremolite) and fibrous erionite from Jersey, Nevada (USA) were determined using inductively coupled plasma mass spectrometry (ICP-MS). For all samples, the following trace elements were measured: Li, Be, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Rb, Sr, Y, Sb, Cs, Ba, La, Pb, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Th, U. Their distribution in the various mineral species is thoroughly discussed. The obtained results indicate that the amount of trace metals such as Mn, Cr, Co, Ni, Cu and Zn is higher in anthophyllite and chrysotile samples, whereas the amount of rare earth elements (REE) is higher in erionite and tremolite samples. The results of this work can be useful to the pathologists and biochemists who use asbestos minerals and fibrous erionite in-vitro studies as positive cyto- and geno-toxic standard references.

"Rinse and trickle": a protocol for TEM preparation and investigation of inorganic fibers from biological material.

The purpose of this work is to define a sample preparation protocol that allows inorganic fibers and particulate matter extracted from different biological samples to be characterized morphologically, crystallographically and chemically by transmission electron microscopy-energy dispersive spectroscopy (TEM-EDS). The method does not damage or create artifacts through chemical attacks of the target material. A fairly rapid specimen preparation is applied with the aim of performing as few steps as possible to transfer the withdrawn inorganic matter onto the TEM grid. The biological sample is previously digested chemically by NaClO. The salt is then removed through a series of centrifugation and rinse cycles in deionized water, thus drastically reducing the digestive power of the NaClO and concentrating the fibers for TEM analysis. The concept of equivalent hydrodynamic diameter is introduced to calculate the settling velocity during the centrifugation cycles. This technique is applicable to lung tissues and can be extended to a wide range of organic materials. The procedure does not appear to cause morphological damage to the fibers or modify their chemistry or degree of crystallinity. The extrapolated data can be used in interdisciplinary studies to understand the pathological effects caused by inorganic materials.

Asbestos contamination in feldspar extraction sites: a failure of prevention? Commentary.

Fibrous tremolite is a mineral species belonging to the amphibole group. It is present almost everywhere in the world as a natural contaminant of other minerals, like talc and vermiculite. It can be also found as a natural contaminant of the chrysotile form of asbestos. Tremolite asbestos exposures result in respiratory health consequences similar to the other forms of asbestos exposure, including lung cancer and mesothelioma. Although abundantly distributed on the earth's surface, tremolite is only rarely present in significant deposits and it has had little commercial use. Significant presence of amphibole asbestos fibers, characterized as tremolite, was identified in mineral powders coming from the milling of feldspar rocks extracted from a Sardinian mining site (Italy). This evidence raises several problems, in particular the prevention of carcinogenic risks for the workers. Feldspar is widespread all over the world and every year it is produced in large quantities and it is used for several productive processes in many manufacturing industries (over 21 million tons of feldspar mined and marketed every year). Until now the presence of tremolite asbestos in feldspar has not been described, nor has the possibility of such a health hazard for workers involved in mining, milling and handling of rocks from feldspar ores been appreciated. Therefore the need for a wider dissemination of knowledge of these problems among professionals, in particular mineralogists and industrial hygienists, must be emphasized. In fact both disciplines are necessary to plan appropriate environmental controls and adequate protections in order to achieve safe working conditions.

Does a Heavy Fe-Isotope Composition of Akilia Quartz-Amphibole-Pyroxene Rocks Necessitate a BIF Origin?

The age and origin of the quartz-amphibole-pyroxene (qap) gneiss from the island of Akilia, southern West Greenland, have been the subject of intense debate since the light C-isotope composition of graphite inclusions in apatite was interpreted to indicate the presence of Earth's earliest biological activity. Although this claim for biogenic relicts has been vigorously challenged, the possibility that the rocks might represent some of Earth's earliest water-lain sediments and, hence, a suitable repository for life remains an open question. While some workers have suggested that the entire sequence represents an originally mafic-ultramafic igneous precursor subsequently modified by metasomatism, quartz injection, high-grade metamorphism, and extreme ductile deformation, others maintain that at least a small part of the sequence retains geochemical characteristics indicative of a chemical sedimentary origin. Fractionated Fe isotopes with δ(56)Fe values similar to those observed in Isua BIF have been reported from high-SiO2 units of qap and used to support a chemical sedimentary protolith for the qap unit. Here, we present new Fe isotope data from all lithologic variants in the qap gneiss on Akilia, including layers of undisputed ultramafic igneous origin. Since the latter require introduction of fractionated Fe into at least part of the qap unit, we argue that Fe isotopes must therefore be treated with considerable caution when used to infer BIF for part or all of the qap protolith.

[Study on identification of traditional Chinese medicine Yangqishi and Yinqishi by X-ray diffraction].

The aim of this paper is to clarify the mineral origin of traditional Chinese medicine (TCM) Yangqishi and Yinqishi and guide identification of the both, by X-ray diffraction (XRD) Fourier patterns. Morphological identification and conventional physical and chemical analysis wee used to identify 22 batches of Yangqishi and Yinqishi. It used XRD Fourier patterns which has been collected from sample powders to analyze phase composition. It has been found experimentally that the mineral origin of Yinqishi is Talc schist and the mineral origin of Yangqishi is tremolite and actinolite. The results also showed that the method using XRD can get not only an accurate but also rapid identification of Yangqishi and Yinqishi. There are many differences in medicinal properties, efficacy, indications and composition of Yangqishi and Yinqishi, so be careful not to mix them up.

Analytical Transmission Electron Microscopy of Amphibole Fibers From the Lungs of Quebec Miners.

The objective of this study is to describe the morphology, molecular structure, and chemistry of amphibole fibers from lung samples from workers in the chrysotile mines at Asbestos and Thetford Mines, Quebec. A fibrous tremolite-actinolite contaminant in an asbestos ore sample from the deposit at Asbestos was used for comparison. Lattice imaging was performed using high-resolution transmission electron microscopy (HRTEM). Silica-rich amorphous coatings (SIRA) that may be related to carcinogenesis are noted on all of the HRTEM photographs of fibers retained in lung, but not on fiber surfaces of the bulk comparison sample. Fibers found in lung samples and in a bulk comparison sample are produced primarily by splitting of thicker crystals and, as such, might not be considered asbestos fibers on the basis of certain mineralogical criteria. Implications of SIRA coatings with respect to carcinogenesis are worthy of further study.

Characterization of Lone Pine, California, tremolite asbestos and preparation of research material.

Well-characterized amphibole asbestos mineral samples are required for use as analytical standards and in future research projects. Currently, the National Institute for Standards and Technology Standard Reference Material samples of asbestos are listed as 'Discontinued'. The National Institute for Occupational Safety and Health (NIOSH) has a goal under the Asbestos Roadmap of locating and characterizing research materials for future use. Where an initial characterization analysis determines that a collected material is appropriate for use as a research material in terms of composition and asbestiform habit, sufficient amounts of the material will be collected to make it publicly available. An abandoned mine near Lone Pine, California, contains a vein of tremolite asbestos, which was the probable source of a reference material that has been available for the past 17 years from the Health and Safety Laboratory (HSL) in the UK. Newly collected fibrous vein material from this mine was analyzed at Research Triangle Institute (RTI International) with some additional analysis by the US Geological Survey's Denver Microbeam Laboratory. The analysis at RTI International included: (i) polarized light microscopy (PLM) with a determination of principal optical properties; (ii) X-ray diffraction; (iii) transmission electron microscopy, including energy dispersive X-ray spectroscopy and selected-area electron diffraction; and (iv) spindle stage analysis using PLM to determine whether individual fibers and bundles of the samples were polycrystalline or single-crystal cleavage fragments. The overall findings of the study indicated that the material is tremolite asbestos with characteristics substantially similar to the earlier distributed HSL reference material. A larger quantity of material was prepared by sorting, acid-washing and mixing for sub-division into vials of ~10g each. These vials have been transferred from NIOSH to RTI International, from where they can be obtained on request.

Improvement of biodegradability, bioactivity, mechanical integrity and cytocompatibility behavior of biodegradable mg based orthopedic implants using nanostructured Bredigite (Ca7MgSi 4O 16) bioceramic coated via ASD/EPD technique.

This research explored the influence of surface modification of AZ91 Mg alloy on the biodegradation, bioactivity, mechanical integrity and cytocompatibility of the alloy. For this purpose, a nanostructured bredigite (Ca7MgSi4O16) ceramic coating was prepared on biodegradable AZ91 Mg alloy through anodic spark deposition and electrophoretic deposition method. The phase composition and surface morphology of the coated alloy were characterized by X-ray diffraction, scanning electron microscope and transmission electron microscope. The properties of samples were investigated by electrochemical measurements, immersion test, compression examination and cell culturing. The results showed that the degradation resistance, bioactivity, mechanical integrity and cytocompatibility of biodegradable Mg alloy were improved by the anodic spark deposition and electrophorretic deposition of the nanostructured bredigite coating. Therefore, the nanostructured bredigite ceramic coating is identified as a good coating for AZ91 Mg alloy for the purpose of making biodegradable metallic orthopedic implants.

Rat model demonstrates a high risk of tremolite but a low risk of anthophyllite for mesothelial carcinogenesis.

Asbestos was abundantly used in industry during the last century. Currently, asbestos confers a heavy social burden due to an increasing number of patients with malignant mesothelioma (MM), which develops after a long incubation period. Many studies have been conducted on the effects of the asbestos types that were most commonly used for commercial applications. However, there are few studies describing the effects of the less common types, or minor asbestos. We performed a rat carcinogenesis study using Japanese tremolite and Afghan anthophyllite. Whereas more than 50% of tremolite fibers had a diameter of < 500 nm, only a small fraction of anthophyllite fibers had a diameter of < 500 nm. We intraperitoneally injected 1 or 10 mg of asbestos into F1 Fischer-344/Brown-Norway rats. In half of the animals, repeated intraperitoneal injections of nitrilotriacetate (NTA), an iron chelator to promote Fenton reaction, were performed to evaluate the potential involvement of iron overload. Tremolite induced MM with a high incidence (96% with 10 mg; 52% with 1 mg), and males were more susceptible than females. Histology was confirmed using immunohistochemistry, and most MMs were characterized as the sarcomatoid or biphasic subtype. Unexpectedly NTA showed an inhibitory effect in females. In contrast, anthophyllite induced no MM after an observation period of 550 days. The results suggest that the carcinogenicity of anthophyllite is weaker than formerly reported, whereas that of tremolite is as potent as major asbestos as compared with our previous data.

The relationship between various exposure metrics for elongate mineral particles (EMP) in the taconite mining and processing industry.

Different dimensions of elongate mineral particles (EMP) have been proposed as being relevant to respiratory health end-points such as mesothelioma and lung cancer. In this article, a methodology for converting personal EMP exposures measured using the National Institute for Occupational Safety and Health (NIOSH) 7400/7402 methods to exposures based on other size-based definitions has been proposed and illustrated. Area monitoring for EMP in the taconite mines in Minnesota's Mesabi Iron Range was conducted using a Micro Orifice Uniform Deposit Impactor (MOUDI) size-fractionating sampler. EMP on stages of the MOUDI were counted and sized according to each EMP definition using an indirect-transfer transmission electron microscopy (ISO Method 13794). EMP were identified using energy-dispersive x-ray and electron diffraction analysis. Conversion factors between the EMP counts based on different definitions were estimated using (1) a linear regression model across all locations and (2) a location-specific ratio of the count based on each EMP definition to the NIOSH 7400/7402 count. The highest fractions of EMP concentrations were found for EMP that were 1-3 µm in length and 0.2-0.5 µm in width. Therefore, the current standard NIOSH Method 7400, which only counts EMP >5 µm in length and ≥ 3 in aspect ratio, may underestimate amphibole EMP exposures. At the same time, there was a high degree of correlation between the exposures estimated according to the different size-based metrics. Therefore, the various dimensional definitions probably do not result in different dose-response relationships in epidemiological analyses. Given the high degree of correlation between the various metrics, a result consistent with prior research, a more reasonable metric might be the measurement of all EMP irrespective of size. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: figures detailing EMP concentration.].

Effects of natural acids on surface properties of asbestos minerals and kaolinite.

Serpentine, and other asbestos minerals, are considered potential hazards to human respiratory health. It has been postulated that the surface characteristics of these substances, such as surface charge and adsorbed metals, notably Fe and other transition metals, may be the major agents responsible for their toxicity. There is a general consensus that the amphibole group of minerals possesses a greater health risk than serpentines dominated by chrysotile. There have been suggestions that natural processes can alter the surfaces of these minerals and reduce their potency. This study examined the effects of carbonic acid, oxalic acid and hydrochloric acid on the surface characteristics of two trioctahedral minerals, actinolite (amphibole) and chrysotile (serpentine), and compared the results to a non-asbestiform, dioctahedral mineral, kaolinite. Results confirm that the treatments alter the mineral surfaces by changing the zeta potential of the asbestiform minerals from positive to negative and by removing considerable amounts on non-crystalline Fe and other metals. X-ray analyses indicated that mineral structure was little affected by the treatments, and TOF-SIMS revealed that treatments did remove surface adsorbed metals and cations in octahedral coordination within the samples.

In vitro determinants of asbestos fiber toxicity: effect on the relative toxicity of Libby amphibole in primary human airway epithelial cells.

BACKGROUND: An abnormally high incidence of lung disease has been observed in the residents of Libby, Montana, which has been attributed to occupational and environmental exposure to fibrous amphiboles originating from a nearby contaminated vermiculite mine. The composition of Libby amphibole (LA) is complex and minimal toxicity data are available. In this study, we conduct a comparative particle toxicity analysis of LA compared with standard reference asbestiform amphibole samples. METHODS: Primary human airway epithelial cells (HAEC) were exposed to two different LA samples as well as standard amphibole reference samples. Analysis of the samples included a complete particle size distribution analysis, calculation of surface area by electron microscopy and by gas adsorption and quantification of surface-conjugated iron and hydroxyl radical production by the fibers. Interleukin-8 mRNA levels were quantified by qRT-PCR to measure relative pro-inflammatory response induced in HAEC in response to amphibole fiber exposure. The relative contribution of key physicochemical determinants on the observed pro-inflammatory response were also evaluated. RESULTS: The RTI amosite reference sample contained the longest fibers and demonstrated the greatest potency at increasing IL-8 transcript levels when evaluated on an equal mass basis. The two LA samples and the UICC amosite reference sample consisted of similar particle numbers per milligram as well as similar particle size distributions and induced comparable levels of IL-8 mRNA. A strong correlation was observed between the elongated particle (aspect ratio ≥3:1) dose metrics of length and external surface area. Expression of the IL-8 data with respect to either of these metrics eliminated the differential response between the RTI amosite sample and the other samples that was observed when HAEC were exposed on an equal mass basis. CONCLUSIONS: On an equal mass basis, LA is as potent as the UICC amosite reference sample at inducing a pro-inflammatory response in HAEC but is less potent than the RTI amosite sample. The results of this study show that the particle length and particle surface area are highly correlated metrics that contribute significantly to the toxicological potential of these amphibole samples with respect to the inflammogenic response induced in airway epithelial cells.

Bioactive bredigite coating with improved bonding strength, rapid apatite mineralization and excellent cytocompatibility.

Previous studies have shown that bredigite (Ca7MgSi4O16) bioceramics possessed excellent biocompatibility, apatite-mineralization ability and mechanical properties. In this paper, the bredigite coating on Ti-6Al-4 V substrate was prepared by plasma spraying technique. The main compositions of the coating were bredigite crystal phase with small parts of amorphous phases. The bonding strength of the coating to Ti-6Al-4 V substrate reached 49.8 MPa, which was significantly higher than that of hydroxyapatite coating and other silicate-based bioceramic coatings prepared by same method. After immersed in simulated body fluid for 2 days, a distinct apatite layer was deposited on the surface of bredigite coating, indicating that the prepared bredigite coating has excellent apatite-mineralization ability. The prepared bredigite coating supported the attachment and proliferation of rabbit bone marrow stem cells. The proliferation level of bone marrow stem cells was significantly higher than that on the hydroxyapatite coating. Our further study showed that the released SiO4 (4-) and Mg(2+) ions from bredigite coating as well as the formed nano-apatite layer on the coating surface might mainly contribute to the improvement of cell proliferation. The results indicated that the bredigite coating may be applied on orthopedic implants due to its excellent bonding strength, apatite mineralization and cytocompatibility.