Rapid and simultaneous determination of curcuminoids and gingerols in food products containing turmeric and ginger using paper spray mass spectrometry.

Turmeric and ginger are extensively employed as functional ingredients due to their high content of curcuminoids and gingerols, considered the key bioactive compounds found in these roots. In this study, we present an innovative and fast method for the assay of curcuminoids and gingerols in different foods containing the two spices, with the aim of monitoring the quality of products from a nutraceutical perspective. The proposed approach is based on paper spray tandem mass spectrometry coupled with the use of a labeled internal standard, which has permitted to achieve the best results in terms of specificity and accuracy. All the calculated analytical parameters were satisfactory; accuracy values are around 100% for all spiked samples and the precision data result lower than 15%. The protocol was applied to several real samples, and to demonstrate its robustness and reliability, the results were compared to those arising from the common liquid chromatographic method.

Perovskite hydroxide-based laccase mimics with controllable activity for environmental remediation and biosensing.

Constructing relatively inexpensive nanomaterials to simulate the catalytic performance of laccase is of great significance in recent years. Although research on improving laccase-like activity by regulating ligands of copper (amino acids or small organic molecules, etc.) have achieved remarkable success. There are few reports on improving laccase-like activity by adjusting the composition of metal Cu. Here, we used perovskite hydroxide AB(OH)6 as a model to evaluate the relationship between Cu based alloys and their laccase-like activity. We found that when the Cu/Mn alloy ratio of the perovskite hydroxide A point is greater than 1, the laccase-like activity of the binary alloy perovskite hydroxide is higher than that of the corresponding single Cu. Based on the measurements of XPS and ICP-MS, we deduced that the improvements of laccase-like activity mainly attribute to the ratio of Cu+/Cu2+and the content of Cu. Moreover, two types of substrates (toxic pollutants and catechol neurotransmitters) were used to successfully demonstrated such nanozymes' excellent environmental protecting function and biosensing property. This work will provide a novel approach for the construction and application of laccase-like nanozymes in the future.

Purification and Biochemical Characterization of Polyphenol Oxidase Extracted from Wheat Bran (Wan grano).

Currently, little is known about the characteristics of polyphenol oxidase from wheat bran, which is closely linked to the browning of wheat product. The wheat PPO was purified by ammonium sulfate precipitation, DEAE-Sepharose ion-exchange column, and Superdex G-75 chromatography column. Purified wheat PPO activity was 11.05-fold higher, its specific activity was 1365.12 U/mg, and its yield was 8.46%. SDS-PAGE showed that the molecular weight of wheat PPO was approximately 21 kDa. Its optimal pH and temperature were 6.5 and 35 °C for catechol as substrate, respectively. Twelve phenolic substrates from wheat and green tea were used for analyzing the substrate specificity. Wheat PPO showed the highest affinity to catechol due to its maximum Vmax (517.55 U·mL-1·min-1) and low Km (6.36 mM) values. Docking analysis revealed strong affinities between catechol, gallic acid, EGCG, and EC with binding energies of -5.28 kcal/mol, -4.65 kcal/mol, -4.21 kcal/mol, and -5.62 kcal/mol, respectively, for PPO. Sodium sulfite, ascorbic acid, and sodium bisulfite dramatically inhibited wheat PPO activity. Cu2+ and Ca2+ at 10 mM were considered potent activators and inhibitors for wheat PPO, respectively. This report provides a theoretical basis for controlling the enzymatic browning of wheat products fortified with green tea.

Vortex-blending matrix solid-phase dispersion and UPLC-Q-TOF/MS were proposed to extract and examine the urushiols from Toxicodendron vernicifluum bark.

Toxicodendron vernicifluum bark has been used for many years as a component in foods and as a traditional herbal medication. Unfortunately, the presence of urushiols, which induce allergies, limits its application. This study used a vortex-blending matrix solid-phase dispersion microextraction technique to extract urushiols from Toxicodendron vernicifluum bark. HPLC was used to evaluate the amounts of the extracted urushiols (15:0, 15:1, 15:2, and 15:3). The modified magnetic adsorbent was prepared through an in situ coprecipitation method and characterized using a variety of techniques. The optimized extraction conditions are as follows: using magnetic Zeolite Socony Mobil-Five as an adsorbent, a 1:2 sample/adsorbent ratio, 2.5 min of vortex-blending time, 4 mL of 0.1% (V/V) trifluoroacetic acid-methanol as the elution solvent and 8 min of ultrasound time. There was good linearity and high repeatability in the method. Furthermore, the limits of detection for the urushiols ranged from 0.20 to 0.50 µg/mL. Under the optimized conditions, 50 compounds were identified by ultra high performance liquid chromatography and quadrupole time-of-flight mass spectrometry. These compounds included 8 phenolic acids, 9 monomeric urushiols, 11 urushiol dimers, 10 other components, and 11 flavonoids. The suggested approach, which has the advantages of few stages and high extraction efficiency over existing extraction procedures, is a potentially useful method for obtaining and evaluating urushiols in raw materials or extracts.

Disposable biosensor based on nanodiamond particles, ionic liquid and poly-l-lysine for determination of phenolic compounds.

This study describes the development of a highly sensitive amperometric biosensor for the analysis of phenolic compounds such as catechol. The biosensor architecture is based on the immobilization of tyrosinase (Tyr) on a screen-printed carbon electrode (SPE) modified with nanodiamond particles (ND), 1-butyl-3-methylimidazolium hexafluorophosphate (IL) and poly-l-lysine (PLL). Surface morphologies of the electrodes during the modification process were evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to investigate the electrochemical characteristics of the modified electrodes. Owing to the synergistic effect of the modification materials, the Tyr/PLL/ND-IL/SPE exhibited high sensitivity (328.2 µA mM-1) towards catechol with a wide linear range (5.0 × 10-8 - 1.2 × 10-5 M) and low detection limit (1.1 × 10-8 M). Furthermore, the method demonstrated good reproducibility and stability. The amperometric response of the biosensor towards other phenolic compounds such as bisphenol A, phenol, p-nitrophenol, m-cresol, p-cresol and o-cresol was also investigated. The analytical applicability of the biosensor was tested by the analysis of catechol in tap water. The results of the tap water analysis showed that the Tyr/PLL/ND-IL/SPE can be used as a practical and effective method for catechol determination.

Polyphenol oxidase inactivation from apple juice by Al-based metal-organic frameworks: New anti-browning strategy in fruits and vegetables.

Polyphenol oxidase (PPO) is critical due to enzymatic browning in fruits and vegetables, developing economic impact in fruits industry. Metal-Organic Frameworks (MOF) have shown interesting characteristics such as water stability, low toxicity, and good adsorption yield, making them good candidates for PPO inactivation. Al-based-MOFs, MIL-53(Al), DUT-5, and MIL-110 were tested as PPO inactivators in apple juice by enzyme-MOF interactions at r.t. through two possible mechanisms, i) substrate scavengers (substrates:catechol and 4-methylcatechol) or ii) enzyme activity modifiers. The scavenging behavior of Al-based-MOFs was moderate, in the same magnitude, being catechol adsorption better than 4-methylcatechol. PPO activity was reduced by at least 70% by MIL-53(Al)/DUT-5 in 10/30 min respectively, and MIL-110 inactivated PPO in 50 min with some structural modifications. Enzyme-MOF interactions are major responsible for PPO inactivation. This could be a new applicability of MOFs, as an alternate PPO inactivation process, easily included in juice processing, retaining sensorial/nutritional properties, developed at r.t thus energy-cost-effective.

6-Gingerol contents of several ginger varieties of Northeast India and correlation of their antioxidant activity in respect to phenolics and flavonoids contents.

INTRODUCTION: Ginger constitutes the rhizome part of the plant Zingiber officinale from the Zingiberaceae family. A large number of ginger varieties with high sensorial and functional quality are found in Northeast India. Hence, phytopharmacological screening of different ginger varieties is essential that will serve as a guideline in applied research to develop high-end products and improve economical margins. OBJECTIVE: To determine the variation in total phenolics content (TPC), total flavonoids content (TFC), and antioxidant activities and correlate that with 6-gingerol contents of different ginger varieties collected from Northeast India using Pearson's correlation analysis. MATERIALS AND METHODS: The TPC and TFC values were determined using standard methods. Antioxidant activities were measured using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and hydroxyl radical scavenging assays, while reversed-phase high-performance liquid chromatography (RP-HPLC) analysis was utilised for quantitative determination of 6-gingerol content. RESULTS: The result revealed that ginger variety 6 (GV6) contains the highest 6-gingerol content and TPC value showing maximum antioxidant activity, followed by GV5, GV4, GV9, GV3, GV2, GV8, GV1, and GV7. The findings also suggested that the antioxidant activity has much better correlations with TPC as compared with TFC values. Pearson's correlation analysis showed a significant correlation between 6-gingerol contents and TPC values. CONCLUSION: This work underlines the importance of ginger varieties from Northeast India as a source of natural antioxidants with health benefits.

Inhibition of benzo[a]pyrene formation in charcoal-grilled pork sausages by ginger and its key compounds.

BACKGROUND: Ginger and its extracts have been frequently used in food processing and pharmaceuticals. However, the influence of ginger and its key compounds on benzo[a]pyrene (BaP) production in meat processing has not been investigated. The purpose of this study was to explore the effect of application of ginger and its important active ingredients on BaP formation and the mechanism of inhibiting BaP formation in charcoal-grilled pork sausages. RESULTS: The DPPH scavenging (23.59-59.67%) activity and the inhibition rate of BaP (42.1-68.9%) were significantly increased (P < 0.05) with increasing ginger addition. The active components extracted by supercritical carbon dioxide from ginger were identified by gas chromatography-mass spectrometry and 14 representative compounds (four terpenes, two alcohols, two aldehydes, four phenols and two other compounds, totaling 77.57% of the detected compounds) were selected. The phenolic compounds (eugenol, 6-gingerol, 6-paradol and 6-shogaol, accounting for 29.73% of the total composition) in ginger played a key role and had the strongest inhibitory effect on BaP (61.2-68.2%), whereas four other kinds of compound showed obviously feeble inhibitory activity (6.47-17.9%). Charcoal-grilled sausages with phenolic substances had lower values of thiobarbituric acid-reactive substances, carbonyl and diene (three classic indicators of lipid oxidation) (P < 0.05). CONCLUSION: Ginger and its key compounds could effectively inhibit the formation of BaP in charcoal-grilled pork sausages. Phenolic compounds make the strongest contribution to the inhibition of Bap formation, and the inhibitory mechanism was related to the inhibition of lipid oxidation. © 2023 Society of Chemical Industry.

New carbon black-based conductive filaments for the additive manufacture of improved electrochemical sensors by fused deposition modeling.

The development of a homemade carbon black composite filament with polylactic acid (CB-PLA) is reported. Optimized filaments containing 28.5% wt. of carbon black were obtained and employed in the 3D printing of improved electrochemical sensors by fused deposition modeling (FDM) technique. The fabricated filaments were used to construct a simple electrochemical system, which was explored for detecting catechol and hydroquinone in water samples and detecting hydrogen peroxide in milk. The determination of catechol and hydroquinone was successfully performed by differential pulse voltammetry, presenting LOD values of 0.02 and 0.22 µmol L-1, respectively, and recovery values ranging from 91.1 to 112% in tap water. Furthermore, the modification of CB-PLA electrodes with Prussian blue allowed the non-enzymatic amperometric detection of hydrogen peroxide at 0.0 V (vs. carbon black reference electrode) in milk samples, with a linear range between 5.0 and 350.0 mol L-1 and low limit of detection (1.03 µmol L-1). Thus, CB-PLA can be successfully applied as additively manufactured electrochemical sensors, and the easy filament manufacturing process allows for its exploration in a diversity of applications.

Nanomaterials as Redox Mediators in Laccase-Based Amperometric Biosensors for Catechol Assay.

Laccase is a copper-containing enzyme that does not require hydrogen peroxide as a co-substrate or additional cofactors for an enzymatic reaction. Nanomaterials of various chemical structures are usually applied to the construction of enzyme-based biosensors. Metals, metal oxides, semiconductors, and composite NPs perform various functions in electrochemical transformation schemes as a platform for the enzyme immobilization, a mediator of an electron transfer, and a signal amplifier. We describe here the development of amperometric biosensors (ABSs) based on laccase and redox-active micro/nanoparticles (hereafter-NPs), which were immobilized on a graphite electrode (GE). For this purpose, we isolated a highly purified enzyme from the fungus Trametes zonatus, and then synthesized bi- and trimetallic NPs of noble and transition metals, as well as hexacyanoferrates (HCF) of noble metals; these were layered onto the surfaces of GEs. The electroactivity of many of the NPs immobilized on the GEs was characterized by cyclic voltammetry (CV) experiments. The most effective mediators of electron transfer were selected as the platform for the development of laccase-based ABSs. As a result, a number of catechol-sensitive ABSs were constructed and characterized. The laccase/CuCo/GE was demonstrated to possess the highest sensitivity to catechol (4523 A·M-1·m-2) among the tested ABSs. The proposed ABSs may be promising for the analysis of phenolic derivatives in real samples of drinking water, wastewater, and food products.

A Cu-functionalized MOF and multi-walled carbon nanotube composite modified electrode for the simultaneous determination of hydroquinone and catechol.

Designing MOF-based materials with desired electrochemical activity and high electron conductivity may yield a novel electrochemical sensor that effectively detects various organic pollutants and conducts health monitoring. This study developed a facile and versatile electrochemical sensor for simultaneously monitoring the environmental pollutants hydroquinone (HQ) and catechol (CT). The electrodes are fabricated by modifying a GCE with a Cu-functionalized MOF (UiO-bpydc-Cu) and multi-walled carbon nanotubes (MWCNTs). The Cu-functionalized MOF effectively improved the electronic conductivity by metalating the 2,2'-bipyridyl-derived UiO-bpydc with Cu2+ ions. Moreover, due to the synergic effect, the composite electrode exhibits a significant voltammetric response to HQ's and CT's electro-redox. A rapid and sensitive method of synchronously detecting HQ and CT has been established by differential pulse voltammetry (DPV). The experiments reveal that the linear response ranges were 0.5-565 µM and 1-1350 µM for HQ and CT, respectively, with low detection limits of 0.361 µM and 0.245 µM. The proposed UiO-bpydc-Cu/MWCNTs/GCE electrochemical sensor shows high sensitivity, good anti-interference, reproducibility, and stability. It can also be applied for detecting HQ and CT in actual samples.

Exploration of multifunctional wood coating based on an interpenetrating network system of rosin-CO2-based polyurethane and mussel bionic rosin-based benzoxazine.

Polyurethane (PU) prepared by blending rosin base and CO2-polyol already has good mechanical properties and hydrophobic effect and has powerful benefits in acid and alkali resistance and salt resistance. In this study, mussel bionic rosin-based benzoxazine (BZ) was synthesized using dehydroabietylamine, catechol, and paraformaldehyde. Mixing BZ into PU can endow the resulting PU/BZ with special effects such as zero curing shrinkage, excellent mechanical behavior, and flame retardancy through a 3D interpenetrating network system. From the results, the modulus of rupture (MOR) and modulus of elasticity (MOE) of PU wood coatings are 97.04 and 2601.97 MPa, respectively; in contrast, the PU/BZ wood coatings exhibited higher values of MOR and MOE of 110.87 and 2738.11 MPa. PU/BZ wood coatings show higher flexural strength and elastic modulus. They are also stronger than PU coatings in terms of acid/alkali and aging resistance. At the same time, the coating is endowed with flame retardant properties, and the LOI is 30.2 due to the presence of BZ. Thus, PU/BZ can be a versatile and practical wood coating. The interpenetrating network system of PU/BZ has an innovative impact on the preparation of wood coatings.

A two-dimensional G-CoP/N,P-co-doped carbon nanowire electrode for the simultaneous determination of hydroquinone and catechol in domestic wastewater.

Hydroquinone (HQ) and catechol (CC) are important chemical raw materials in the modern industry, unfortunately, which are also high toxic phenolic pollutants. So how to achieve highly sensitive and selective determination HQ and CC is the challenge we face. In the present work, we report a facile strategy to obtain nitrogen and phosphorous co-doped glucose-derived carbon coated CoP nanowires (G-CoP/N,P-C NWs), in which nitrilotriacetic acid (NTA) was as the chelating reagent, glucose was as carbon source, and the precursors were subsequently experienced carbonization and phosphorization process. G-CoP/N,P-C NWs can shorten the distance of the electron transport and expand the reaction area, showing the intriguing electronic conductivity and electrocatalytic abilities. An electrochemical phenolic sensor based on G-CoP/N,P-C NWs is fabricated. The as-prepared sensor showcases the good sensing performance for HQ and CC with comparative linearity ranges of 0.8-900 µM (HQ) and 0.6-800 µM (CC), low limits of detections (LODs) of 0.18 µM (S/N = 3) and 0.12 µM (S/N = 3) for HQ and CC, respectively. Notably, it also displays excellent practical application for the recognition of HQ and CC in the rain water, the tap water, the domestic wastewater and the lake water, which may be a promising candidate in environmental water monitoring and drinking water safety.

Synthesis, characterization and use of enzyme cashew gum nanoparticles for biosensing applications.

This research reports, for the first time, the immobilization of an enzyme - Rhus vernificera laccase - on cashew gum (CG) nanoparticles (NPs) and its application as a biological layer in the design and development of an electrochemical biosensor. Laccase-CG nanoparticles (LacCG-NPs) were prepared by the nanoprecipitation method and characterized by UV-Vis spectrophotometry, atomic force microscopy, scanning electron microscopy, attenuated total reflectance-Fourier-transform infrared spectroscopy, circular dichroism, cyclic voltammetry, and electrochemical impedance spectroscopy. The average size and stability of the NPs were predicted by DLS and zeta potential. The ATR-FTIR results clearly demonstrated an interaction between -NH and -OH groups to form LacCG-NPs. The average size found for LacCG-NPs was 280 ± 53 nm and a polydispersity index of 0.309 ± 0.08 indicated a good particle size distribution. The zeta potential shows a good colloidal stability. The use of a natural product to prepare the enzymatic nanoparticles, its easy synthesis and the immobilization efficiency should be highlighted. LacCG-NPs were successfully applied as a biolayer in the development of an amperometric biosensor for catechol detection. The resulting device showed a low response time (6 s), good sensitivity (7.86 µA µM-1 cm-2), wide linear range of 2.5 × 10-7-2.0 × 10-4 M, and low detection limit (50 nM).

On-tissue boronic acid derivatization for the analysis of vicinal diol metabolites in maize with MALDI-MS imaging.

Derivatization reactions are commonly used in mass spectrometry to improve analyte signals, specifically by enhancing the ionization efficiency of those compounds. Vicinal diols are one group of biologically important compounds that have been commonly derivatized using boronic acid. In this study, a boronic acid with a tertiary amine was adapted for the derivatization of vicinal diol metabolites in B73 maize tissue cross-sections for mass spectrometry imaging analysis. Using this method, dozens of vicinal diol metabolites were derivatized, effectively improving the signal of those metabolites. Many of these metabolites were tentatively assigned using high-resolution accurate mass measurements. In addition, reaction interference and cross-reactivity with various other functional groups were systematically studied to verify data interpretation.

Enhancing electrochemical sensing for catechol by biomimetic oxidase covalently functionalized graphene oxide.

Catechol level is an important indicator for evaluating the quality of tea. Therefore, the exploration of a simple and efficient quantitative detection method for catechol has an important significance. In this study, functionalized graphene oxide was synthesized by chemically modifying the surface of graphene oxide. The prepared carrier was covalently combined with biomimetic oxidase iron porphyrin (FePP, the active center of horseradish peroxidase). Ionic liquid as covalent coupling agents was designed as electronic bridge between biomimetic oxidase and graphene oxide. The novel biomimetic biosensor provided a detection range of 50.0-1600.0 µmol/L by modulating under the optimal conditions of the reaction system (FePP concentration is 1.5 × 10-3 mol/L, pH 3.0, Nafion solution dosage 1% and temperature 25 °C), the detection limit is 0.09 µmol/L. The biosensor has excellent stability, repeatability and reproducibility, and is expected to be applied to the rapid detection of catechol in actual tea sample..

Rapid and practical qualitative and quantitative evaluation of non-fumigated ginger and sulfur-fumigated ginger via Fourier-transform infrared spectroscopy and chemometric methods.

A strategy was developed to distinguish and quantitate nonfumigated ginger (NS-ginger) and sulfur-fumigated ginger (S-ginger), based on Fourier transform near infrared spectroscopy (FT-NIR) and chemometrics. FT-NIR provided a reliable method to qualitatively assess ginger samples and batches of S-ginger (41) and NS-ginger (39) were discriminated using principal component analysis and orthogonal partial least squares discriminant analysis of FT-NIR data. To generate quantitative methods based on partial least squares (PLS) and counter propagation artificial neural network (CP-ANN) from the FT-NIR, major gingerols were quantified using high performance liquid chromatography (HPLC) and the data used as a reference. Finally, PLS and CP-ANN were deployed to predict concentrations of target compounds in S- and NS-ginger. The results indicated that FT-NIR can provide an alternative to HPLC for prediction of active components in ginger samples and was able to work directly on solid samples.

Qualitative analysis on chemical constituents from different polarity extracted fractions of the pulp and peel of ginger rhizomes by ultra-high-performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass spectrometry.

RATIONALE: Ginger pulp is the dried rhizome scraped off the skin which originates from Zingiber officinale Rosc., a Zingiberaceae plant. Ginger peel is the dried rhizome skin of Zingiber officinale Rosc. (Zingiberaceae). The present work aims to investigate the different chemical constituents that are related to the medicinal properties of the ginger pulp and ginger peel. METHODS: A rapid ultra-high-performance liquid chromatography/electrospray ionization quadrupole time-of-flight tandem mass spectrometry (UHPLC/ESI-QTOF/MS) method was developed for qualitative analysis of the constituents in different polarity extracted fractions of the pulp and peel of ginger rhizomes. RESULTS: A total of 83 compounds were identified from the pulp and peel of ginger rhizomes, including 36 diarylheptanoids, 25 gingerols and 22 other compounds. Nine of these were new compounds. In total, 46, 27, 65 and 51 compounds were identified from the crude extract, petroleum ether, ethyl acetate, and n-butanol fractions of the ginger pulp, respectively, and 60, 30, 70 and 62 compounds were identified from the crude extract, petroleum ether, ethyl acetate, n-butanol fractions of the ginger peel, respectively. Each identified compound is marked on the corresponding chromatogram. CONCLUSIONS: The integrated method is sensitive and reliable for searching the different chemical constituents from different polarity extracted fractions of the ginger pulp and ginger peel. This work may provide a significant contribution to research into the medicinal properties of the ginger pulp and ginger peel.

Quality control and long-term stability study of ginger from different geographical origins using chemometrics.

BACKGROUND: Ginger rhizome (Zingiber officinale) is a well-known spice and medicinal plant that is widely used in the Egyptian market as a spice, flavor and medicinal herb for different diseases. Since it is not cultivated as rhizomes in Egypt, ginger is imported from other countries, which may impact its quality. In this study, UV spectroscopy and high-performance liquid chromatography (HPLC) were applied as efficient available techniques for the discrimination and quality control of ginger collected from different geographical origins in combination with chemometrics. In addition, HPLC was applied to investigate the stability of ginger samples upon storage for 3 years to trace the changes in their main active constituents. RESULTS: Data obtained from both UV and HPLC in combination with Principal Component Analysis (PCA) displayed proper discrimination of the samples according to their geographical origins. Regarding the stability study, ginger samples showed a significant decrease in quality after storage for 3 years, in which significant variation in the main pungent principles (6-, 8-, 10-gingerols and 6-shogaol) were observed. PCA failed to discriminate between ginger samples after long-time storage, so the applied model could discriminate between ginger samples before and after storage. CONCLUSION: UV and HPLC in combination with chemometrics can be applied as a successful tool for the study of quality, stability and geographical discrimination of ginger. © 2020 Society of Chemical Industry.

Determination of phenol biodegradation pathways in three psychrotolerant yeasts, Candida subhashii A011, Candida oregonensis B021 and Schizoblastosporion starkeyi-henricii L012, isolated from Rucianka peatland.

In this study, three psychrotolerant phenol-degrading yeast strains Candida subhashii (strain A011), Candida oregonenis (strain B021) and Schizoblastosporion starkeyi-henricii (strain L012) isolated from Rucianka peatland were examined to determine which alternative metabolic pathway for phenol biodegradation is used by these microorganisms. All yeast strains were cultivated in minimal salt medium supplemented with phenol at 500, 750 and 1000 mg l-1 concentration with two ways of conducting phenol biodegradation experiments: with and without the starving step of yeast cells. For studied yeast strains, no catechol 2,3-dioxygenase activities were detected by enzymatic assay and no products of catechol meta-cleavage in yeast cultures supernatants (GC-MS analysis), were detected. The detection of catechol 1,2-dioxygenase activity and the presence of cis,cis-muconic acid in the analyzed samples revealed that all studied psychrotolerant yeast strains were able to metabolize phenol via the ortho-cleavage pathway. Therefore, they may be tested in terms of their use to develop biotechnology for the production of cis,cis-muconic acid, a substrate used in the production of plastics (PET) and other valuable goods.