Consolidated bioprocessing for bioethanol production by metabolically engineered cellulolytic fungus Myceliophthora thermophila.

Using cellulosic ethanol as fuel is one way to help achieve the world's decarbonization goals. However, the economics of the present technology are unfavorable, especially the cost of cellulose degradation. Here, we reprogram the thermophilic cellulosic fungus Myceliophthora thermophila to directly ferment cellulose into ethanol by mimicking the aerobic ethanol fermentation of yeast (the Crabtree effect), including optimizing the synthetic pathway, enhancing the glycolytic rate, inhibiting mitochondrial NADH shuttles, and knocking out ethanol consumption pathway. The final engineered strain produced 52.8 g/L ethanol directly from cellulose, and 39.8 g/L from corncob, without the need for any added cellulase, while the starting strain produced almost no ethanol. We also demonstrate that as the ethanol fermentation by engineered M. thermophila increases, the composition and expression of cellulases that facilitate the degradation of cellulose, especially cellobiohydrolases, changes. The simplified production process and significantly increased ethanol yield indicate that the fungal consolidated bioprocessing technology that we develop here (one-step, one-strain ethanol production) is promising for fueling sustainable carbon-neutral biomanufacturing in the future.

Genome-wide characterization of the cellulose synthase gene family in Ziziphus jujuba reveals its function in cellulose biosynthesis during fruit development.

The cellulose synthase (Ces/Csl) is a key enzyme in plant cellulose synthesis. Jujube fruits are rich in cellulose. 29 ZjCesA/Csl genes were identified in jujube genome and showed tissue-specific expression. 13 genes highly expressed in jujube fruit exhibited obviously sequential expressions during the fruit development, indicating that they might play distinct roles during the process. Meanwhile, the correlation analysis showed the expressions of ZjCesA1 and ZjCslA1 were significant positive related to the cellulose synthase activities. Furthermore, transient overexpressions of ZjCesA1 or ZjCslA1 in jujube fruits significantly increased cellulose synthase activities and contents, whereas silencing of ZjCesA1 or ZjCslA1 in jujube seedlings obviously reduced cellulose levels. Moreover, the Y2H assays verified that ZjCesA1 and ZjCslA1 may participate in cellulose synthesis by forming protein complexes. The study not only reveals the bioinformatics characteristics and functions of cellulose synthase genes in jujube, but also provides clues for studying cellulose synthesis in other fruits.

Screening cellulose synthesis related genes of EgrEXP and EgrHEX in Eucalyptus grandis.

Eucalyptus (including Eucalyptus grandis) is an excellent wood forest tree species that provides a large number of plant fiber raw materials for the paper and timber industries. Cellulose, an essential structural component in plant cell walls, is a renewable biomass resource that plays a very important role in nature. There is still a lack of research on the role of gene regulation in cellulose synthesis. To study the genes of cellulose synthesis, the wood chemical indexes of Eucalyptus grandis were analyzed by taking three different parts from the main stem of Eucalyptus grandis as raw materials. The results showed that the cellulose content in the middle of the trunk was significantly higher than that at the chest diameter and at the upper part of the trunk. A total of 296 differentially expressed genes (DEGs) were obtained from the three site by transcriptome, and 19 key candidate genes were related to the synthesis of cellulose in Eucalyptus grandis. EgrEXP1 and EgrHEX4 were overexpressed in 84 K poplar, the content of cellulose and lignin in genetically modified plants was significantly higher than that of wild type 84 K poplar. Also, the average plant height and average root count were significantly higher than those of control plants, and the average diameter of the middle and stem bases were significantly larger than those of control plants. In this study, the genes related to cellulose synthesis in Eucalyptus grandis are studied, which serve as a strong foundation for understanding the molecular regulation of cellulose synthesis in plants.

Komagataeibacter Tool Kit (KTK): A Modular Cloning System for Multigene Constructs and Programmed Protein Secretion from Cellulose Producing Bacteria.

Bacteria proficient at producing cellulose are an attractive synthetic biology host for the emerging field of Engineered Living Materials (ELMs). Species from the Komagataeibacter genus produce high yields of pure cellulose materials in a short time with minimal resources, and pioneering work has shown that genetic engineering in these strains is possible and can be used to modify the material and its production. To accelerate synthetic biology progress in these bacteria, we introduce here the Komagataeibacter tool kit (KTK), a standardized modular cloning system based on Golden Gate DNA assembly that allows DNA parts to be combined to build complex multigene constructs expressed in bacteria from plasmids. Working in Komagataeibacter rhaeticus, we describe basic parts for this system, including promoters, fusion tags, and reporter proteins, before showcasing how the assembly system enables more complex designs. Specifically, we use KTK cloning to reformat the Escherichia coli curli amyloid fiber system for functional expression in K. rhaeticus, and go on to modify it as a system for programming protein secretion from the cellulose producing bacteria. With this toolkit, we aim to accelerate modular synthetic biology in these bacteria, and enable more rapid progress in the emerging ELMs community.

Combining analytical approaches for better lignocellulosic biomass degradation: a way of improving fungal enzymatic cocktails?

PURPOSE: In this study, a combinatory approach was undertaken to assay the efficiency of fungal enzymatic cocktails from different fermentation conditions to degrade different lignocellulosic biomasses with the aim of finely characterizing fungal enzymatic cocktails. METHODS: Enzymatic assays (AZO and pNP-linked substrates and ABTS) were used to assess the composition of the fungal enzymatic cocktails for cellulase, xylanase and laccase activities. Comparisons were made with a new range of chromogenic substrates based on complex biomass (CBS substrates). The saccharification efficiency of the cocktails was evaluated as a quantification of the sugar monomers released from the different biomasses after incubation with the enzymatic cocktails. RESULTS: The results obtained showed striking differences between the AZO and pNP-linked substrates and the CBS substrates for the same enzymatic cocktails. On AZO and pNP-linked substrates, different hydrolysis profiles were observed between the different fungi species with Aspergillus oryzae being the most efficient. However, the results on CBS substrates were more contrasted depending on the biomass tested. Altogether, the results highlighted that assessing laccase activities and taking into account the complexity of the biomass to degrade were key in order to provide the best enzymatic cocktails. CONCLUSION: The complementary experiments performed in this study showed that different approaches needed to be taken in order to accurately assess the ability of an enzymatic cocktail to be efficient when it comes to lignocellulosic biomass degradation. The saccharification assay proved to be essential to validate the data obtained from both simple and complex substrates.

Thermostable cellulose saccharifying microbial enzymes: Characteristics, recent advances and biotechnological applications.

Cellulases play a promising role in the bioconversion of renewable lignocellulosic biomass into fermentable sugars which are subsequently fermented to biofuels and other value-added chemicals. Besides biofuel industries, they are also in huge demand in textile, detergent, and paper and pulp industries. Low titres of cellulase production and processing are the main issues that contribute to high enzyme cost. The success of ethanol-based biorefinery depends on high production titres and the catalytic efficiency of cellulases functional at elevated temperatures with acid/alkali tolerance and the low cost. In view of their wider application in various industrial processes, stable cellulases that are active at elevated temperatures in the acidic-alkaline pH ranges, and organic solvents and salt tolerance would be useful. This review provides a recent update on the advances made in thermostable cellulases. Developments in their sources, characteristics and mechanisms are updated. Various methods such as rational design, directed evolution, synthetic & system biology and immobilization techniques adopted in evolving cellulases with ameliorated thermostability and characteristics are also discussed. The wide range of applications of thermostable cellulases in various industrial sectors is described.

Building a Flower: The Influence of Cell Wall Composition on Flower Development and Reproduction.

Floral patterning is a complex task. Various organs and tissues must be formed to fulfill reproductive functions. Flower development has been studied, mainly looking for master regulators. However, downstream changes such as the cell wall composition are relevant since they allow cells to divide, differentiate, and grow. In this review, we focus on the main components of the primary cell wall-cellulose, hemicellulose, and pectins-to describe how enzymes involved in the biosynthesis, modifications, and degradation of cell wall components are related to the formation of the floral organs. Additionally, internal and external stimuli participate in the genetic regulation that modulates the activity of cell wall remodeling proteins.

Systematic Understanding of Recent Developments in Bacterial Cellulose Biosynthesis at Genetic, Bioprocess and Product Levels.

Engineering biological processes has become a standard approach to produce various commercially valuable chemicals, therapeutics, and biomaterials. Among these products, bacterial cellulose represents major advances to biomedical and healthcare applications. In comparison to properties of plant cellulose, bacterial cellulose (BC) shows distinctive characteristics such as a high purity, high water retention, and biocompatibility. However, low product yield and extensive cultivation times have been the main challenges in the large-scale production of BC. For decades, studies focused on optimization of cellulose production through modification of culturing strategies and conditions. With an increasing demand for BC, researchers are now exploring to improve BC production and functionality at different categories: genetic, bioprocess, and product levels as well as model driven approaches targeting each of these categories. This comprehensive review discusses the progress in BC platforms categorizing the most recent advancements under different research focuses and provides systematic understanding of the progress in BC biosynthesis. The aim of this review is to present the potential of 'modern genetic engineering tools' and 'model-driven approaches' on improving the yield of BC, altering the properties, and adding new functionality. We also provide insights for the future perspectives and potential approaches to promote BC use in biomedical applications.

Genetic Transformation of Trichoderma spp.

The production of biofuels from plant biomass is dependent on the availability of enzymes that can hydrolyze the plant cell wall polysaccharides to their monosaccharides. These enzyme mixtures are formed by microorganisms but their native compositions and properties are often not ideal for application. Genetic engineering of these microorganisms is therefore necessary, in which introduction of DNA is an essential precondition. The filamentous fungus Trichoderma reesei-the main producer of plant-cell-wall-degrading enzymes for biofuels and other industries-has been subjected to intensive genetic engineering toward this goal and has become one of the iconic examples of the successful genetic improvement of fungi. However, the genetic manipulation of other enzyme-producing Trichoderma species is frequently less efficient and, therefore, rarely managed. In this chapter, we therefore describe the two potent methods of Trichoderma transformation mediated by either (a) polyethylene glycol (PEG) or (b) Agrobacterium. The methods are optimized for T. reesei but can also be applied for such transformation-resilient species as T. harzianum and T. guizhouense, which are putative upcoming alternatives for T. reesei in this field. The protocols are simple, do not require extensive training or special equipment, and can be further adjusted for T. reesei mutants with particular properties.

HOMEODOMAIN GLABROUS2 regulates cellulose biosynthesis in seed coat mucilage by activating CELLULOSE SYNTHASE5.

Numerous proteins involved in cellulose biosynthesis and assembly have been functionally characterized. Nevertheless, we have a limited understanding of the mechanisms underlying the transcriptional regulation of the genes that encode these proteins. Here, we report that HOMEODOMAIN GLABROUS2 (HDG2), a Homeobox-Leucine Zipper IV transcription factor, regulates cellulose biosynthesis in Arabidopsis (Arabidopsis thaliana) seed coat mucilage. HDG2 is a transcriptional activator with the transactivation domain located within its Leucine-Zipper domain. Transcripts of HDG2 were detected specifically in seed coat epidermal cells with peak expression at 10 d postanthesis. Disruptions of HDG2 led to seed coat mucilage with aberrant morphology due to a reduction in its crystalline cellulose content. Electrophoretic mobility shift and yeast one-hybrid assays, together with chromatin immunoprecipitation and quantitative PCR, provided evidence that HDG2 directly activates CELLULOSE SYNTHASE5 (CESA5) expression by binding to the L1-box cis-acting element in its promoter. Overexpression of CESA5 partially rescued the mucilage defects of hdg2-3. Together, our data suggest that HDG2 directly activates CESA5 expression and thus is a positive regulator of cellulose biosynthesis in seed coat mucilage.

Orchestration of virulence factor expression and modulation of biofilm dispersal in Erwinia amylovora through activation of the Hfq-dependent small RNA RprA.

Erwinia amylovora is the causative agent of the devastating disease fire blight of pome fruit trees. After infection of host plant leaves at apple shoot tips, E. amylovora cells form biofilms in xylem vessels, restrict water flow, and cause wilting symptoms. Although E. amylovora is well known to be able to cause systemic infection, how biofilm cells of E. amylovora transit from the sessile mode of growth in xylem to the planktonic mode of growth in cortical parenchyma remains unknown. Increasing evidence has suggested the important modulatory roles of Hfq-dependent small RNAs (sRNAs) in the pathogenesis of E. amylovora. Here, we demonstrate that the sRNA RprA acts as a positive regulator of amylovoran exopolysaccharide production, the type III secretion system (T3SS), and flagellar-dependent motility, and as a negative regulator of levansucrase activity and cellulose production. We also show that RprA affects the promoter activity of multiple virulence factor genes and regulates hrpS, a critical T3SS regulator, at the posttranscriptional level. We determined that rprA expression can be activated by the Rcs phosphorelay, and that expression is active during T3SS-mediated host infection in an immature pear fruit infection model. We further showed that overexpression of rprA activated the in vitro dispersal of E. amylovora cells from biofilms. Thus, our investigation of the varied role of RprA in affecting E. amylovora virulence provides important insights into the functions of this sRNA in biofilm control and systemic infection.

A Lambda Red and FLP/FRT-Mediated Site-Specific Recombination System in Komagataeibacter xylinus and Its Application to Enhance the Productivity of Bacterial Cellulose.

Komagataeibacter xylinus has received increasing attention as an important microorganism for the conversion of several carbon sources to bacterial cellulose (BC). However, BC productivity has been impeded by the lack of efficient genetic engineering techniques. In this study, a lambda Red and FLP/FRT-mediated site-specific recombination system was successfully established in Komagataeibacter xylinus. Using this system, the membrane bound gene gcd, a gene that encodes glucose dehydrogenase, was knocked out to reduce the modification of glucose to gluconic acid. The engineered strain could not produce any gluconic acid and presented a decreased bacterial cellulose (BC) production due to its restricted glucose utilization. To address this problem, the gene of glucose facilitator protein (glf; ZMO0366) was introduced into the knockout strain coupled with the overexpression of the endogenous glucokinase gene (glk). The BC yield of the resultant strain increased by 63.63-173.68%, thus reducing the production cost.

Biological role of EPS from Pseudomonas syringae pv. syringae UMAF0158 extracellular matrix, focusing on a Psl-like polysaccharide.

Pseudomonas syringae is a phytopathogenic model bacterium that is used worldwide to study plant-bacteria interactions and biofilm formation in association with a plant host. Within this species, the syringae pathovar is the most studied due to its wide host range, affecting both, woody and herbaceous plants. In particular, Pseudomonas syringae pv. syringae (Pss) has been previously described as the causal agent of bacterial apical necrosis on mango trees. Pss exhibits major epiphytic traits and virulence factors that improve its epiphytic survival and pathogenicity in mango trees. The cellulose exopolysaccharide has been described as a key component in the development of the biofilm lifestyle of the P. syringae pv. syringae UMAF0158 strain (PssUMAF0158). PssUMAF0158 contains two additional genomic regions that putatively encode for exopolysaccharides such as alginate and a Psl-like polysaccharide. To date, the Psl polysaccharide has only been studied in Pseudomonas aeruginosa, in which it plays an important role during biofilm development. However, its function in plant-associated bacteria is still unknown. To understand how these exopolysaccharides contribute to the biofilm matrix of PssUMAF0158, knockout mutants of genes encoding these putative exopolysaccharides were constructed. Flow-cell chamber experiments revealed that cellulose and the Psl-like polysaccharide constitute a basic scaffold for biofilm architecture in this bacterium. Curiously, the Psl-like polysaccharide of PssUMAF0158 plays a role in virulence similar to what has been described for cellulose. Finally, the impaired swarming motility of the Psl-like exopolysaccharide mutant suggests that this exopolysaccharide may play a role in the motility of PssUMAF0158 over the mango plant surface.

Analyzing the weak dimerization of a cellulose binding module by analytical ultracentrifugation.

Cellulose binding modules (CBMs) are found widely in different proteins that act on cellulose. Because they allow a very easy way of binding recombinant proteins to cellulose, they have become widespread in many biotechnological applications involving cellulose. One commonly used variant is the CBMCipA from Clostridium thermocellum. Here we studied the oligomerization behavior of CBMCipA, as such solution association may have an impact on its use. As the principal approach, we used sedimentation velocity and sedimentation equilibrium analytical ultracentrifugation. To enhance our understanding of the possible interactions, we used molecular dynamics simulations. By analysis of the sedimentation velocity data by a discrete model genetic algorithm and by building a binding isotherm based on weight average sedimentation coefficient and by global fitting of sedimentation equilibrium data we found that the CBMCipA shows a weak dimerization interaction with a dissociation constant KD of 90 ± 30 µM. As the KD of CBMCipA binding to cellulose is below 1 µM, we conclude that the dimerization is unlikely to affect cellulose binding. However, at high concentrations used in some applications of the CBMCipA, its dimerization is likely to have a marked effect on its solution behavior.

Mutations in the Pectin Methyltransferase QUASIMODO2 Influence Cellulose Biosynthesis and Wall Integrity in Arabidopsis.

Pectins are abundant in the cell walls of dicotyledonous plants, but how they interact with other wall polymers and influence wall integrity and cell growth has remained mysterious. Here, we verified that QUASIMODO2 (QUA2) is a pectin methyltransferase and determined that QUA2 is required for normal pectin biosynthesis. To gain further insight into how pectin affects wall assembly and integrity maintenance, we investigated cellulose biosynthesis, cellulose organization, cortical microtubules, and wall integrity signaling in two mutant alleles of Arabidopsis (Arabidopsis thaliana) QUA2, qua2 and tsd2 In both mutants, crystalline cellulose content is reduced, cellulose synthase particles move more slowly, and cellulose organization is aberrant. NMR analysis shows higher mobility of cellulose and matrix polysaccharides in the mutants. Microtubules in mutant hypocotyls have aberrant organization and depolymerize more readily upon treatment with oryzalin or external force. The expression of genes related to wall integrity, wall biosynthesis, and microtubule stability is dysregulated in both mutants. These data provide insights into how homogalacturonan is methylesterified upon its synthesis, the mechanisms by which pectin functionally interacts with cellulose, and how these interactions are translated into intracellular regulation to maintain the structural integrity of the cell wall during plant growth and development.

Enhanced Production of Bacterial Cellulose in Komagataeibacter xylinus Via Tuning of Biosynthesis Genes with Synthetic RBS.

Bacterial cellulose (BC) has outstanding physical and chemical properties, including high crystallinity, moisture retention, and tensile strength. Currently, the major producer of BC is Komagataeibacter xylinus. However, due to limited tools of expression, this host is difficult to engineer metabolically to improve BC productivity. In this study, a regulated expression system for K. xylinus with synthetic ribosome binding site (RBS) was developed and used to engineer a BC biosynthesis pathway. A synthetic RBS library was constructed using green fluorescent protein (GFP) as a reporter, and three synthetic RBSs (R4, R15, and R6) with different strengths were successfully isolated by fluorescence-activated cell sorting (FACS). Using synthetic RBS, we optimized the expression of three homologous genes responsible for BC production, pgm, galU, and ndp, and thereby greatly increased it under both static and shaking culture conditions. The final titer of BC under static and shaking conditions was 5.28 and 3.67 g/l, respectively. Our findings demonstrate that reinforced metabolic flux towards BC through quantitative gene expression represents a practical strategy for the improvement of BC productivity.

Insights into the mechanism of cyanobacteria removal by the algicidal fungi Bjerkandera adusta and Trametes versicolor.

Fungal mycelia can eliminate almost all cocultured cyanobacterial cells within a short time. However, molecular mechanisms of algicidal fungi are poorly understood. In this study, a time-course transcriptomic analysis of algicidal fungus Bjerkandera adusta T1 was applied to investigate gene expression and regulation. A total of 132, 300, 422, and 823 differentially expressed genes (DEGs) were identified at 6, 12, 24, and 48 hr, respectively. Most DEGs exhibited high endopeptidase activity, cellulose catabolic process, and transmembrane transporter activity by using Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses. Many decomposition genes encoding endopeptidases were induced a little later in B. adusta T1 when compared with previously investigated algicidal fungus Trametes versicolor F21a. Besides, the accumulated expression of Polysaccharide lyases8 (PL8) gene with peptidoglycan and alginate decomposition abilities was greatly delayed in B. adusta T1 relative to T. versicolor F21a. It was implied that endopeptidases and enzymes of PL8 might be responsible for the strong algicidal ability of B. adusta T1 as well as T. versicolor F21a.

MicroRNA comparison between poplar and larch provides insight into the different mechanism of wood formation.

KEY MESSAGE: MiRNA transcriptome analysis of different tissues in poplar and larch suggests variant roles of miRNAs in regulating wood formation between two kinds of phyla. Poplar and larch belong to two different phyla. Both are ecological woody species and major resources for wood-related industrial applications. However, wood properties are different between these two species and the molecular basis is largely unknown. In this study, we performed high-throughput sequencing of microRNAs (miRNAs) in the three tissues, xylem, phloem and leaf of Populus alba × Populus glandulosa and Larix kaempferi. Differentially expressed miRNA (DEmiRNA) analysis identified 85 xylem-specific miRNAs in P. alba × P. glandulosa and 158 xylem-specific miRNAs in L. kaempferi. Among 36 common miRNAs, 12 were conserved between the two species. GO and KEGG analyses of the miRNA target genes showed similar metabolism in two species. Through KEGG and BLASTN, we predicted target genes of xylem differentially expressed (DEmiRNA) in the wood formation-related pathways and located DEmiRNAs in these pathways. A network was built for wood formation-related DEmiRNAs, their target genes and orthologous genes in Arabidopsis thaliana. Comparison of DEmiRNA and target gene annotation between P. alba × P. glandulosa and L. kaempferi suggested the different functions of DEmiRNAs and divergent mechanism in wood formation between two species, providing knowledge to understand wood formation mechanism in gymnosperm and angiosperm woody plants.

Functions and regulatory framework of ZmNST3 in maize under lodging and drought stress.

The growth and development of maize are negatively affected by various abiotic stresses including drought, high salinity, extreme temperature, and strong wind. Therefore, it is important to understand the molecular mechanisms underlying abiotic stress resistance in maize. In the present work, we identified that a novel NAC transcriptional factor, ZmNST3, enhances maize lodging resistance and drought stress tolerance. ChIP-Seq and expression of target genes analysis showed that ZmNST3 could directly regulate the expression of genes related to cell wall biosynthesis which could subsequently enhance lodging resistance. Furthermore, we also demonstrated that ZmNST3 affected the expression of genes related to the synthesis of antioxidant enzyme secondary metabolites that could enhance drought resistance. More importantly, we are the first to report that ZmNST3 directly binds to the promoters of CESA5 and Dynamin-Related Proteins2A (DRP2A) and activates the expression of genes related to secondary cell wall cellulose biosynthesis. Additionally, we revealed that ZmNST3 directly binds to the promoters of GST/GlnRS and activates genes which could enhance the production of antioxidant enzymes in vivo. Overall, our work contributes to a comprehensive understanding of the regulatory network of ZmNST3 in regulating maize lodging and drought stress resistance.

Endogenous carbohydrate esterases of Clostridium thermocellum are identified and disrupted for enhanced isobutyl acetate production from cellulose.

Medium-chain esters are versatile chemicals with broad applications as flavors, fragrances, solvents, and potential drop-in biofuels. Currently, these esters are largely produced by the conventional chemical process that uses harsh operating conditions and requires high energy input. Alternatively, the microbial conversion route has recently emerged as a promising platform for sustainable and renewable ester production. The ester biosynthesis pathways can utilize either lipases or alcohol acyltransferase (AAT), but the AAT-dependent pathway is more thermodynamically favorable in an aqueous fermentation environment. Even though a cellulolytic thermophile Clostridium thermocellum harboring an AAT-dependent pathway has recently been engineered for direct conversion of lignocellulosic biomass into esters, the production is not efficient. One potential bottleneck is the ester degradation caused by the endogenous carbohydrate esterases (CEs) whose functional roles are poorly understood. The challenge is to identify and disrupt CEs that can alleviate ester degradation while not negatively affecting the efficient and robust capability of C. thermocellum for lignocellulosic biomass deconstruction. In this study, by using bioinformatics, comparative genomics, and enzymatic analysis to screen a library of CEs, we identified and disrupted the two most critical CEs, Clo1313_0613 and Clo1313_0693, that significantly contribute to isobutyl acetate degradation in C. thermocellum. We demonstrated that an engineered esterase-deficient C. thermocellum strain not only reduced ester hydrolysis but also improved isobutyl acetate production while maintaining effective cellulose assimilation.