RESUMEN
Cytochrome c (CytC), a one-electron carrier, transfers electrons from complex bc1 to cytochrome c oxidase (CcO) in the electron-transport chain. Electrostatic interaction with the partners, complex bc1 and CcO, is ensured by a lysine cluster near the heme forming the Universal Binding Site (UBS). We constructed three mutant variants of mitochondrial CytC with one (2Mut), four (5Mut), and five (8Mut) Lys->Glu substitutions in the UBS and some compensating Glu->Lys substitutions at the periphery of the UBS for charge compensation. All mutants showed a 4-6 times increased peroxidase activity and accelerated binding of cyanide to the ferric heme of CytC. In contrast, decomposition of the cyanide complex with ferrous CytC, as monitored by magnetic circular dichroism spectroscopy, was slower in mutants compared to WT. Molecular dynamic simulations revealed the increase in the fluctuations of Cα atoms of individual residues of mutant CytC compared to WT, especially in the Ω-loop (70-85), which can cause destabilization of the Fe S(Met80) coordination link, facilitation of the binding of exogenous ligands cyanide and peroxide, and an increase in peroxidase activity. It was found that only one substitution K72E is enough to induce all these changes, indicating the significance of K72 and the Ω-loop (70-85) for the structure and physiology of mitochondrial CytC. In this work, we also propose using a ferro-ferricyanide buffer as a substrate to monitor the peroxidase activity of CytC. This new approach allows us to determine the rate of peroxidase activity at moderate (200 µM) concentrations of H2O2 and avoid complications of radical formation during the reaction.
Asunto(s)
Citocromos c , Simulación de Dinámica Molecular , Sitios de Unión , Ligandos , Citocromos c/metabolismo , Citocromos c/química , Citocromos c/genética , Peroxidasa/metabolismo , Peroxidasa/química , Peroxidasa/genética , Sustitución de Aminoácidos , Unión Proteica , Cianuros/metabolismo , Cianuros/química , Animales , Hemo/metabolismo , Hemo/química , MutaciónRESUMEN
Given the growing concern over the deployment of toxic chemicals in warfare, the rapid and accurate removal and detection of cyanogen chloride (CK) as a blood agent has become increasingly critical. However, conventional physisorbents and chemisorbents used in military respirators are insufficient for the effective removal of CK. In this study, we demonstrate the chemisorption and sensing abilities of Co2(m-DOBDC) (m-DOBDC4- = 4,6-dioxo-1,3-benzenedicarboxylate) for CK via electrophilic aromatic substitution (EAS) in humid environments. Unlike the chemisorption in triethylenediamine (TEDA) impregnated carbon materials, which generates by-products through hydrolysis, the electron-rich C5 sites in m-DOBDC4- ligands give rise to cyano substitution with CK. This leads to the formation of stable C-C bonds and chloride ions (Cl-) coordinating with open Co2+ sites. Such a mechanism prevents the generation of toxic by-products like cyanic acid and hydrochloric acid. Breakthrough experiments conducted in a packed-bed system conclusively demonstrated the superior CK removal capacity of Co2(m-DOBDC) (1662 min/g), compared to TEDA-impregnated activated carbon (323 min/g) under humid conditions. Considering that MOF-74 series, isostructural with Co2(m-DOBDC), barely adsorb CK under similar conditions, this finding marks a significant advancement in developing novel sorbents for CK removal. Moreover, this chemisorption not only exhibited rapid and highly efficient CK removal but also enabled colorimetric monitoring via the distinctive color change induced by the coordination of Cl- acting as σ donors. These findings facilitate the development of adsorption and sensing equipment to protect military personnel from toxic chemical threats.
Asunto(s)
Colorimetría , Estructuras Metalorgánicas , Nitrilos , Adsorción , Estructuras Metalorgánicas/química , Nitrilos/química , Nitrilos/análisis , Cianuros/análisis , Cianuros/químicaRESUMEN
Simple and efficient sample pretreatment methods are important for analysis and detection of chemical warfare agents (CWAs) in environmental and biological samples. Despite many commercial materials or reagents that have been already applied in sample preparation, such as SPE columns, few materials with specificity have been utilized for purification or enrichment. In this study, ionic magnetic mesoporous nanomaterials such as poly(4-VB)@M-MSNs (magnetic mesoporous silicon nanoparticles modified by 4-vinyl benzene sulfonic acid) and Co2+@M-MSNs (magnetic mesoporous silicon nanoparticles modified by cobalt ions) with high absorptivity for ethanol amines (EAs, nitrogen mustard degradation products) and cyanide were successfully synthesized. The special nanomaterials were obtained by modification of magnetic mesoporous particles prepared based on co-precipitation using -SO3H and Co2+. The materials were fully characterized in terms of their composition and structure. The results indicated that poly(4-VB)@M-MSNs or Co2+@M-MSNs had an unambiguous core-shell structure with a BET of 341.7 m2·g-1 and a saturation magnetization intensity of 60.66 emu·g-1 which indicated the good thermal stability. Poly(4-VB)@M-MSNs showed selective adsorption for EAs while the Co2+@M-MSNs were for cyanide, respectively. The adsorption capacity quickly reached the adsorption equilibrium within the 90 s. The saturated adsorption amounts were MDEA = 35.83 mg·g-1, EDEA = 35.00 mg·g-1, TEA = 17.90 mg·g-1 and CN-= 31.48 mg·g-1, respectively. Meanwhile, the adsorption capacities could be maintained at 50-70% after three adsorption-desorption cycles. The adsorption isotherms were confirmed as the Langmuir equation and the Freundlich equation, respectively, and the adsorption mechanism was determined by DFT calculation. The adsorbents were applied for enrichment of targets in actual samples, which showed great potential for the verification of chemical weapons and the destruction of toxic chemicals.
Asunto(s)
Aminas , Cianuros , Etanol , Cianuros/química , Cianuros/aislamiento & purificación , Adsorción , Aminas/química , Etanol/química , Porosidad , Cobalto/química , Nanopartículas de Magnetita/química , Nanoestructuras/químicaRESUMEN
Cytochrome bd-I from Escherichia coli belongs to the superfamily of prokaryotic bd-type oxygen reductases. It contains three hemes, b558, b595 and d, and couples oxidation of quinol by dioxygen with the generation of a proton-motive force. The enzyme exhibits resistance to various stressors and is considered as a target protein for next-generation antimicrobials. By using electronic absorption and MCD spectroscopy, this work shows that cyanide binds to heme d2+ in the isolated fully reduced cytochrome bd-I. Cyanide-induced difference absorption spectra display changes near the heme d2+ α-band, a minimum at 633 nm and a maximum around 600 nm, and a W-shaped response in the Soret region. Apparent dissociation constant (Kd) of the cyanide complex of heme d2+ is â¼0.052 M. Kinetics of cyanide binding is monophasic, indicating the presence of a single ligand binding site in the enzyme. Consistently, MCD data show that cyanide binds to heme d2+ but not to b5582+ or b5952+. This agrees with the published structural data that the enzyme's active site is not a di-heme site. The observed rate of binding (kobs) increases as the concentration of cyanide is increased, giving a second-order rate constant (kon) of â¼0.1 M-1 s-1.
Asunto(s)
Cianuros , Proteínas de Escherichia coli , Escherichia coli , Hemo , Oxidorreductasas , Proteínas de Escherichia coli/metabolismo , Proteínas de Escherichia coli/química , Escherichia coli/metabolismo , Escherichia coli/enzimología , Cianuros/metabolismo , Cianuros/química , Hemo/metabolismo , Hemo/química , Oxidorreductasas/metabolismo , Oxidorreductasas/química , Oxidación-Reducción , Proteínas del Complejo de Cadena de Transporte de Electrón/metabolismo , Proteínas del Complejo de Cadena de Transporte de Electrón/química , Grupo Citocromo b/metabolismo , Grupo Citocromo b/química , Cinética , Citocromos/metabolismo , Citocromos/química , Sitios de Unión , Unión ProteicaRESUMEN
Isocyanides and isocyanates are some of the most reactive compounds in organic chemistry, making them perceived as compounds with high potential for use in both the laboratory and industry. With their high reactivity also comes several disadvantages, most notably their potentially high toxicity. The following article is a collection of information on the toxic effects of the isocyanide group on the human body and the environment. Information on the mechanism of how these harmful substances affect living tissues and the environment, worldwide information on how to protect against these chemicals, current regulations, and exposure limits for specific countries is compiled. The latest research on the application uses of isocyanates and isocyanides is also outlined, as well as the latest safer and greener methods and techniques to work with these compounds. Additionally, the presented article can serve as a brief guide to the organic toxicity of a group of isocyanates and isocyanates.
Asunto(s)
Cianuros , Isocianatos , Isocianatos/toxicidad , Cianuros/química , Humanos , Contaminantes Ambientales/toxicidad , Exposición a Riesgos AmbientalesRESUMEN
Cyanide is a typical toxic reducing agent prevailing in wastewater with a well-defined chemical mechanism, whereas its exploitation as an electron donor by microorganisms is currently understudied. Given that conventional denitrification requires additional electron donors, the cyanide and nitrogen can be eliminated simultaneously if the reducing HCN/CN- and its complexes are used as inorganic electron donors. Hence, this paper proposes anaerobic cyanides oxidation for nitrite reduction, whereby the biological toxicity and activity of cyanides are modulated by bimetallics. Performance tests illustrated that low toxicity equivalents of iron-copper composite cyanides provided higher denitrification loads with the release of cyanide ions and electrons from the complex structure by the bimetal. Both isotopic labeling and Density Functional Theory (DFT) demonstrated that CN--N supplied electrons for nitrite reduction. The superposition of chemical processes reduces the biotoxicity and enhances the biological activity of cyanides in the CN-/Fe3+/Cu2+/NO2- coexistence system, including complex detoxification of CN- by Fe3+, CN- release by Cu2+ from [Fe(CN)6]3-, and NO release by nitrite substitution of -CN groups. Cyanide is the smallest structural unit of C/N-containing compounds and serves as a probe to extend the electron-donating principle of anaerobic cyanides oxidation to more electron-donor microbial utilization.
Asunto(s)
Cobre , Cianuros , Hierro , Nitritos , Oxidación-Reducción , Cianuros/toxicidad , Cianuros/química , Nitritos/química , Nitritos/toxicidad , Cobre/química , Cobre/toxicidad , Anaerobiosis , Hierro/química , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/química , Aguas Residuales/química , Aguas Residuales/toxicidad , Desnitrificación/efectos de los fármacosRESUMEN
Reactive metabolite formation is a major mechanism of hepatotoxicity. Although reactive electrophiles can be soft or hard in nature, screening strategies have generally focused on the use of glutathione trapping assays to screen for soft electrophiles, with many data sets available to support their use. The use of a similar assay for hard electrophiles using cyanide as the trapping agent is far less common, and there is a lack of studies with sufficient supporting data. Using a set of 260 compounds with a defined hepatotoxicity status by the FDA, a comprehensive literature search yielded cyanide trapping data on an unbalanced set of 20 compounds that were all clinically hepatotoxic. Thus, a further set of 19 compounds was selected to generate cyanide trapping data, resulting in a more balanced data set of 39 compounds. Analysis of the data demonstrated that the cyanide trapping assay had high specificity (92%) and a positive predictive value (83%) such that hepatotoxic compounds would be confidently flagged. Structural analysis of the adducts formed revealed artifactual methylated cyanide adducts to also occur, highlighting the importance of full structural identification to confirm the nature of the adduct formed. The assay was demonstrated to add the most value for compounds containing typical structural alerts for hard electrophile formation: half of the severe hepatotoxins with these structural alerts formed cyanide adducts, while none of the severe hepatotoxins with no relevant structural alerts formed adducts. The assay conditions used included cytosolic enzymes (e.g., aldehyde oxidase) and an optimized cyanide concentration to minimize the inhibition of cytochrome P450 enzymes by cyanide. Based on the demonstrated added value of this assay, it is to be initiated for use at GSK as part of the integrated hepatotoxicity strategy, with its performance being reviewed periodically as more data is generated.
Asunto(s)
Enfermedad Hepática Inducida por Sustancias y Drogas , Cianuros , Cianuros/metabolismo , Cianuros/química , Humanos , Enfermedad Hepática Inducida por Sustancias y Drogas/metabolismo , Enfermedad Hepática Inducida por Sustancias y Drogas/etiología , Iminas/química , Iminas/metabolismo , Hígado/metabolismo , Hígado/efectos de los fármacos , Estructura MolecularRESUMEN
A new molecular structure 1 has been developed on naphthalimide motif. The amine and triazole binding groups have been employed at the 4-position of naphthalimide to explore the sensing behavior of molecule 1. Single crystal x-ray diffraction and other spectroscopic techniques confirm the identity of 1. Compound 1 exhibits high selectivity and sensitivity for Cu2+ ions in CH3CN. The binding of Cu2+ shows â¼ 70-fold enhancement in emission at 520 nm. The binding follows 1:1 interaction and the detection limit is determined to be 6.49 × 10-7 M. The amine-triazole binding site in 1 also corroborates the detection of F- through a colour change in CH3CN. Initially H-bonding and then deprotonation of amine -NH- in the presence of F- are the sequential steps involved in F- recognition with a detection limit of 4.13 × 10-7 M. Compound 1 is also sensible to CN- like F- ion and they are distinguished by Fe3+ ion. Cu2+-ensemble of 1 fluorimetrically recognizes F- among the tested anions and vice-versa. The collaborative effect of amine and triazole motifs in the binding of both Cu2+ and F-/CN- has been explained by DFT calculation.
Asunto(s)
Colorimetría , Cobre , Naftalimidas , Espectrometría de Fluorescencia , Naftalimidas/química , Cobre/química , Cobre/análisis , Colorimetría/métodos , Espectrometría de Fluorescencia/métodos , Cianuros/análisis , Cianuros/química , Límite de Detección , Fluoruros/análisis , Fluoruros/química , Colorantes Fluorescentes/química , Cristalografía por Rayos X/métodos , Enlace de HidrógenoRESUMEN
In this study, we synthesized a coumarin-hemicyanine-based deep red fluorescent dye that exhibits an intramolecular charge transfer (ICT). The probe had a large Stokes shift of 287 nm and a large molar absorption coefficient (ε = 7.5 × 105 L·mol-1·cm-1) and is best described as a deep red luminescent fluorescent probe with λem = 667 nm. The color of probe W changed significantly when it encountered cyanide ions (CN-). The absorption peak (585 nm) decreased gradually, and the absorption peak (428 nm) increased gradually, so that cyanide (CN-) could be identified by the naked eye. Moreover, an obvious fluorescence change was evident before and after the reaction under irradiation using 365 nm UV light. The maximum emission peak (667 nm) decreased gradually, whilst the emission peak (495 nm) increased gradually, which allowed for the proportional fluorescence detection of cyanide (CN-). Using fluorescence spectrometry, the fluorescent probe W could linearly detect CN- over the concentration range of 1-9 µM (R2 = 9913, RSD = 0.534) with a detection limit of 0.24 µM. Using UV-Vis spectrophotometry, the linear detection range for CN- was found to be 1-27 µM (R2 = 0.99583, RSD = 0.675) with a detection limit of 0.13 µM. The sensing mechanism was confirmed by 1H NMR spectroscopic titrations, 13C NMR spectroscopy, X-ray crystallographic analysis and HRMS. The recognition and detection of CN- by probe W was characterized by a rapid response, high selectivity, and high sensitivity. Therefore, this probe provides a convenient, effective and economical method for synthesizing and detecting cyanide efficiently and sensitively.
Asunto(s)
Cianuros , Colorantes Fluorescentes , Cianuros/química , Colorantes Fluorescentes/química , Carbocianinas , Cumarinas/química , Espectrometría de Fluorescencia/métodosRESUMEN
There do not appear to be any established therapeutics for treating azide poisoning at this time, and presently available antidotes to cyanide poisoning are far from ideal, being particularly impractical for use if multiple victims present. The cobalt (II/III) complex of the Schiff-base ligand trans-[14]-diene (5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene (CoN4[14]) is shown to act as an effective antidote to both azide and cyanide toxicity in mice. Groups of animals challenged with an LD40 dose of NaCN (100 µmol/kg i.p.) exhibited significantly faster recovery from knockdown and fewer (zero) deaths if given CoN4[14] (50 µmol/kg i.p.) 2 minutes after the toxicant. Groups of animals challenged with an essentially lethal dose of NaCN (1.5 x LD50 = 150 µmol/kg i.p.) all survived if given the CoN4[14] (75 µmol/kg i.p.) 5 minutes before the toxicant dose. These data represent improved antidotal capability over the Food and Drug Administration-approved cobalt-based cyanide antidote hydroxocobalamin. Recovery of animals challenged sublethally with NaN3 (415 µmol/kg i.p.) was assessed employing a modified pole-climbing test. Mice given the CoN4[14] antidote (70 µg/kg i.p.) 5 minutes after the toxicant dose recovered twice as fast as the controls given no antidote. The interactions of cyanide and azide with CoN4[14] in vitro (buffered aqueous solutions) have been further investigated by a combination of spectroscopic approaches. The Co(II) form of the complex is able to bind two CN- anions while only binding a single N3 -, providing a reasonable explanation for the difference between their therapeutic abilities. SIGNIFICANCE STATEMENT: The Schiff-base complex CoN4[14] is shown to be an effective antidote to cyanide in mice, with improved therapeutic capabilities compared to the Food and Drug Administration-approved cobalt-containing hydroxocobalamin. CoN4[14] is also antidotal in mice toward azide poisoning, for which there is seemingly no approved therapy currently available. The activity toward cyanide involves a "redox-switching" mechanism that could be a common, but largely unrecognized, feature of all cobalt-based cyanide antidotes in use and under development.
Asunto(s)
Antídotos , Hidroxocobalamina , Estados Unidos , Animales , Ratones , Antídotos/farmacología , Antídotos/uso terapéutico , Hidroxocobalamina/farmacología , Hidroxocobalamina/uso terapéutico , Azidas , Cobalto/química , Cianuros/química , Bases de Schiff/químicaRESUMEN
Hazardous cyanide anions (CN-) are increasingly threatening the environment and human health due to their widespread use in industry and many other fields. Over the past three decades, a large number of probes have been reported to sensitively and selectively detect this toxic anion, while a rather limited number of ratiometric fluorescent probes have been developed. The ratiometric probes have significant potential in bio-imaging and biomedical applications because of the ability to detect CN- in a quick, convenient and affordable way. In this review, we introduce 42 ratiometric fluorescent probes reported in the past 6 years (2018-2023) for CN- detection. Our description includes the chemical structures, photo-physical properties, CN- sensing mechanisms, solution color changes, limits of detection (LODs) and/or various applications of these chemical probes. This review provides guidelines for design and development of a new ratiometric probe for effective CN- detection.
Asunto(s)
Cianuros , Colorantes Fluorescentes , Humanos , Colorantes Fluorescentes/química , Cianuros/química , Espectrometría de Fluorescencia , Límite de DetecciónRESUMEN
Protein-templated fragment ligation was established as a method for the rapid identification of high affinity ligands, and multicomponent reactions (MCR) such as the Ugi four-component reaction (Ugi 4CR) have been efficient in the synthesis of drug candidates. Thus, the combination of both strategies should provide a powerful approach to drug discovery. Here, we investigate protein-templated Ugi 4CR quantitatively using a fluorescence-based enzyme assay, HPLC-QTOF mass spectrometry (MS), and native protein MS with SARS-CoV-2 main protease as template. Ugi reactions were analyzed in aqueous buffer at varying pH and fragment concentration. Potent inhibitors of the protease were formed in presence of the protein via Ugi 4CR together with Ugi three-component reaction (Ugi 3CR) products. Binding of inhibitors to the protease was confirmed by native MS and resulted in the dimerization of the protein target. Formation of Ugi products was, however, more efficient in the non-templated reaction, apparently due to interactions of the protein with the isocyanide and imine fragments. Consequently, in-situ ligation screening of Ugi 4CR products was identified as a superior approach to the discovery of SARS-CoV-2 protease inhibitors.
Asunto(s)
COVID-19 , Humanos , COVID-19/diagnóstico , SARS-CoV-2 , Proteasas 3C de Coronavirus , Cianuros/química , Endopeptidasas , Inhibidores de ProteasasRESUMEN
Benzopyrans (BZPs) are among the most privileged and influential small O-heterocycles that form the core of many natural compounds, commercial drugs, biological compositions, agrochemicals, and functional materials. BZPs are divided into six general categories including coumarins, chromans, 2H-chromenes, 4H-chromenes, chromones, and 4-chromanones, each of which is abundant in many plants and foods. These oxygenated heterocyclic compounds are fascinating motifs and have extensive applications in biology and materials science. Hence, numerous efforts have been made to develop innovative approaches for their extraction and synthesis. However, most of them are step-by-step or multi-step strategies that suffer from waste material generation and a tedious extraction process. Isocyanide-based multicomponent reactions (I-MCRs) offer a highly efficient method for overcoming these problems. The I-MCR is a simple and environmentally friendly one-pot domino procedure that does not require intermediate isolation or workup and is generally more efficient in material usage. This review covers all research articles related to I-MCRs for synthesizing BZP derivatives from the beginning to the middle of the year 2023. This strategy will be useful for organic and pharmaceutical chemists to design new drugs and optimize the synthesis steps of biological compounds and commercial drugs with benzopyran cores.
Asunto(s)
Cianuros , Compuestos Heterocíclicos , Cianuros/química , Benzopiranos/química , Compuestos Heterocíclicos/químicaRESUMEN
An ultrasonic-assisted isocyanide-based protocol to access a series of functionalized spirorhodanine-cyclopentadiene and spirorhodanine-iminobutenolide conjugates from alkyl isocyanides and dialkyl acetylenedicarboxylates in the presence of 5-ylidene rhodanines in MeCN, is described. The reaction proceeds via interception of the reactive Winterfeldt's zwitterions by 5-ylidene rhodanine derivatives. The structures of the target compounds were confirmed by X-ray diffraction studies.
Asunto(s)
Cianuros , Rodanina , Cianuros/química , Difracción de Rayos XRESUMEN
Tetrazole-based easily synthesizable fluorogenic probes have been developed that can form self-assembled nanostructures in the aqueous medium. Though the compounds could achieve detection of cyanide ions in apolar solvents, such as, THF, significant interference was observed from other basic anions, such as F-, AcO-, H2PO4-, etc. On the other hand, a highly specific response was observed for CN- ions in the aqueous medium. However, the sensitivity was so poor that it could hardly be useful for real-life sample analysis. Interestingly, the co-assembly of such probe molecules with hydroxyethyl-anchored amphoteric surfactants could drastically improve the sensitivity toward CN- ions in water without dampening their excellent selectivity. Also, it was observed that the degree of fluorescence response for CN- ions depends on the nature of the polyaromatic scaffolds (naphthyl vs anthracenyl), the nature of the surfactant assembly (micelle vs vesicle), etc. The mechanistic investigation indicates the hydrogen bonding interaction between the tetrazole -NH group and cyanide ions in the aqueous medium, which can effectively change the electronics of the tetrazole unit, resulting in alteration in the extent of charge transfer interaction. Then, the biocompatible composite materials (dye-surfactant assemblies at different ratios) were tested for antituberculosis activity. Fortunately, in a few cases, the compositions were found to be as effective as the commercially available antituberculosis drug, ethambutol.
Asunto(s)
Cianuros , Tensoactivos , Cianuros/análisis , Cianuros/química , Tensoactivos/farmacología , Colorantes Fluorescentes/farmacología , Colorantes Fluorescentes/química , Aniones , Agua/química , Antituberculosos/farmacología , Antituberculosos/análisisRESUMEN
Excessive levels of cyanide (CN-) and hypochlorite (ClO-) anions are the significant threats to the human health and the environment. Thus, great efforts have been to design and synthesize molecular sensors for the simple, instantaneous and efficient detecting environmentally and biologically important anions. Currently, developing a single molecular sensor for multi-analyte sensing is still a challenging task. In our present work, we developed a new molecular sensor (3TM) based on oligothiophene and Meldrum's acid units for detecting cyanide and hypochlorite anions in biological, environmental and food samples. The detecting ability of 3TM has been examined to various testing substances containing amino acids, reactive oxygen species, cations and anions, showing its high selectivity, excellent sensitivity, short response time (ClO-: 30 s, CN-: 100 s), and broad pH working range (4-10). The detection limits were calculated as 4.2 nM for ClO- in DMSO/H2O (1/8, v/v) solution and 6.5 nM for CN- in DMSO/H2O (1/99, v/v) solution. Sensor 3TM displayed sharp turn-on fluorescence increasement (555 nm, 435 nm) and sensitive fluorescence color changes caused by CN-/ClO-, which is ascribed to the nucleophilic addition and oxidation of ethylenic linkage by cyanide and hypochlorite, respectively. Moreover, sensor 3TM was applied for hypochlorite and cyanide detecting in real-world water, food samples and bio-imaging in live cells and zebrafish. To our knowledge, the developed 3TM sensor is the seventh single-molecular sensor for simultaneous and discriminative detecting hypochlorite and cyanide in food, biological and aqueous environments using two distinct sensing modes.
Asunto(s)
Cianuros , Pez Cebra , Animales , Humanos , Cianuros/química , Ácido Hipocloroso , Dimetilsulfóxido , Colorantes Fluorescentes/química , Aniones , Agua/químicaRESUMEN
A simple fluorescent probe (KS4) containing multiple reaction sites (phenolic -OH, imine and C = C bonds) is successfully synthesized and characterized using 1H NMR, 13C NMR, mass and single crystal XRD techniques. KS4 exhibits high selectivity towards CN- over a wide range of common anions in H2O:DMSO (1:1 v/v) leading to an amazing turn-on fluorescence at 505 nm via deprotonation of the phenolic -OH group. The limit of detection (1.3 µM) for CN- was much below the standard (1.9 µM) set by the World Health Organization (WHO). Stoichiometry of the interaction between KS4 and CN- was ascertained as 1:1 by the Job's plot method and the binding constant was determined to be 1.5x104 M-1. Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) based theoretical insight has been appealed to understand the optical properties of KS4 before and after the addition of CN- ion. The probe shows respectable real-time applicability for qualitative detection of CN- in almond and cassava powder as well as quantification in real water samples with excellent recoveries (98.8 - 99.8%). In addition, KS4 is found to safe towards living HeLa cells and successfully applied to the detection of endogenous cyanide ions in HeLa cells.
Asunto(s)
Cianuros , Agua , Humanos , Cianuros/química , Células HeLa , Fluorometría/métodos , Agua/química , Diagnóstico por Imagen , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia/métodosRESUMEN
In this work, π-conjugated block copolymers consisting of poly(phenyl isocyanide) (PPI) and polyfluorene (PF) segments are facilely prepared by one-pot sequential polymerization of phenyl isocyanide (monomer 1) and 7-bromo-9,9-dioctylfluorene-2-boronic acid pinacol ester (monomer 2). The Pd(II)-terminated PPI is first prepared via polymerizing monomer 1 catalyzed with phenyl alkyne-Pd(II) complex and then utilized to initiate the controlled Suzuki cross-coupling polymerization of monomer 2, yielding various PPI-b-PF copolymers possessing controlled molar mass and narrow dispersity. Owing to the helical conformation of PPI segment and π-conjugated structure of PF segment, PPI-b-PF copolymers present distinctive optical property and fascinating chiral self-assembly behavior. During the self-assembly process, chirality transfer from helical PPI block to the supramolecular aggregates of helical nanofibers occurs to afford optically active helical nanofibers with high optical activity. Furthermore, the self-assembled helical nanofibers exhibit excellent circularly polarized luminescence performance.
Asunto(s)
Cianuros , Luminiscencia , Cianuros/química , Polímeros/química , Conformación Molecular , PolimerizacionRESUMEN
Metal-cyanide complexes are common contaminants in industrial wastewater. Removal of these refractory contaminants is essential before their discharge into the environment. This study investigated a biochar (BC)-based sorbent material that could be applied for the efficient removal of metal-cyanide complexes from wastewater. In consideration of the strong electrostatic repulsion of the pristine BC toward anions, iron-modified BC (Fe-BC) composites were fabricated by a one-step co-pyrolysis of corn straw and FeCl3 at 600-800 °C. The adsorption performance and corresponding sorption mechanisms of representative metal-cyanide complexes (ferricyanide [Fe(CN)6]3- and tetracyanonickelate [Ni(CN)4]2-) onto the Fe-BC composites were investigated. The results indicated that the Fe-BC composites had significantly high affinity toward the metal-cyanide complexes, reaching a maximum sorption capacity of 580.96 mg/g for [Fe(CN)6]3- and 588.86 mg/g for [Ni (CN)4]2-. A mechanistic study revealed that Fe-impregnation during BC fabrication could effectively alter the negatively charged BC surface, forming more functional groups that could interact with the metal-cyanide complexes. Moreover, the transformation of carbon structure promoted the carbothermal reduction process, leading to the formation of various reductive-Fe minerals in the resulting Fe-BC composites. These modification-induced alterations to the surface and structural characteristics of BC were expected to facilitate the adsorption/precipitation of target contaminants. Different sorption mechanisms were proposed for the two metal-cyanide complexes that were the focus of this study. For [Fe(CN)6]3-, precipitation by Fe-bearing species in the Fe-BC composites was the major factor controlling [Fe(CN)6]3- removal, while for [Ni(CN)4]2- hydrogen bonding interactions between surface functional groups (especially hydroxyl (-OH) and carboxyl (-COOH)) and [Ni(CN)4]2- were the main factors controlling removal.
Asunto(s)
Complejos de Coordinación , Contaminantes Químicos del Agua , Aguas Residuales , Complejos de Coordinación/química , Adsorción , Carbón Orgánico/química , Cianuros/química , Contaminantes Químicos del Agua/análisisRESUMEN
A sensitive and selective phenothiazine-based sensor (PTZ) has been successfully synthesized. The sensor PTZ displayed specific identification of CN- 'turn-off' fluorescence responses with a quick reaction and strong reversibility in an acetonitrile:water (90:10, V/V) solution. The sensor PTZ for detecting CN- exhibits the marked advantages of quenching the fluorescence intensity, fast response time (60 s), and low value of the detection limit. The concentration that is authorized for drinking water by the WHO (1.9 µM) is far higher than the detection limit, which was found to be 9.11 × 10-9 . The sensor displays distinct colorimetric and spectrofluorometric detection for CN- anion due to the addition of CN- anion to the electron-deficient vinyl group of PTZ, which reduces intramolecular charge transfer efficiencies. The 1:2 binding mechanism of PTZ with CN- was validated by fluorescence titration, Job's plot, HRMS, 1 H NMR, FTIR analysis, and density functional theory (DFT) investigations, among other methods. Additionally, the PTZ sensor was successfully used to precisely and accurately detect cyanide anions in actual water samples.